Blanke•AQUA ProfilesPerfection for floor-level showers

www.blanke-systems.com

Blanke•AQUA ProfileWell designed and elegant is the linear drainage system in the showerarea. The extra plus hereby is built by high quality edge-and transitionprofiles from Blanke. For floor level showers in a private wellness oase,for the modern hotel room or the visionary use in the project area-thesystem is simply the best choise. Timeless design and sophisticatedtechnique in perfection.

2

Blanke•AQUA-KEIL WALLThe perfect solution to connect gradientareas to walls.

Blanke•AQUA-DEKOis a sleek profile which is installed above alinear drain to offer a perfect appearance offloor level showers.

Detail-solutionswith profiles

3

Blanke•AQUA-GLASfor the well shapped fixation ofglass partitions without drilling

Blanke•AQUA-KEILPerfect solution for transition from shower area to floor.

Blanke•AQUA-KEIL GLASa value added profile-transition from gradient tothe even area and as take of a partition wall ofglass.

4

Example:Execution right

Blanke•AQUA-KEIL

h1

h2 0,8

38

40

in Stainless Steel brushed, silk dull or chromed

For a perfect solution in gradient areas in connection to floors with lineardrainage systems-the Blanke Aqua Keil. The gradient edge from stainlesssteel is available in right and left versions

length in m: 0,98 1,48 2,00h1 in mm: 8,00 10,00 12,50h2 in mm: 24,00 32,00 40,00

Blanke•AQUA-KEIL WALL in Stainless Steel brushed, silk dull or chromed

Blanke•AQUA-DEKO in Stainless Steel brushed, silk dull or chromed

h1 h1

h2 h2

0,8 0,8

38 38

h

4,5

The Blanke•AQUA-KEIL WALL, gradient edge from stainless steel for aperfect solution to connect gradient areas to walls in combination withlinear drainage systems. Available in right and left versions

length in m: 0,98 1,48 2,00h1 in mm: 8,00 10,00 12,50h2 in mm: 24,00 32,00 40,00

Blanke•AQUA-DEKO is an elegant edge above the drainage while forming floor level showers. Further tile cuts will be avoided and theshower area gets a unique optic.

length in m: 1,25 1,25 1,25h in mm: 24,00 32,00 40,00

advantages• Elegant edge for floor level showers • Avoids further tile cutting • Gives a unique optic

Executionleft

Executionright

NEWin chrome!

NEWin chrome!

NEWin chrome!

advantages• The expensive mitre cut in wall tiles is not needed • Other fall sizes possible by different thicknesses of tile.

• Right and left versions• Easiest assembly with 2% fall

5

Blanke•AQUA-KEIL GLAS in Stainless steel brushed, satin or chrome plated

Furnished with a profile to take glass partition wall (f.ex.linear drai-nage systems) the Blanke•AQUA-GLAS allows the building of a falledge for well shapped floor level showers.

length in m: 0,98 1,20 1,48 2,00h in mm: 34,00 37,00 42,00 60,00

19

46,2

h

13

0,8

NEWin chrome!

Blanke•AQUA-GLAS

Stainless steel surfaces in comparison

in Stainless steel brushed, satin or chrome plated

The glass carrying profile Blanke•AQUA-GLAS allows an easy and wellshapped installation of glass partitions to wall and floor-complete wit-hout drilling and cutting of tiles-in comparison to traditional installationmethod here a non-destructive and water proof fixing is ensured.

length in m: 2,10h1 in mm: 25,00h2 in mm: 12,00

advantages• Easy installation without cutting tiles. – Blanke•AQUA-GLAS

uses the width of gap for a safe installation.• Assembly without drilling-compared to traditional method a

non-destructive and water proof fixing is ensured.

brushed satin chrome plated

• As well as in the wall as also in the floor area, in any otherarea or corner situations-also in lateral view applicable.

• High quality stainless steel and a reasoned detail solutioncreate a timeless, generous design.

Example:Execution right

12,2

31,5

h 1

h 2

13

0,8

Due to print technical reasons the shown color shades and structures may deviate from the original surface.

NEWin chrome!

6

Blanke•AQUA ProfilesPerfectly tuned to High shinning

7

Blanke•AQUA Profile chrome plated to high shinningStarting from now Blanke enlarges the high valued assortment of stainless steel AQUA Profiles by the surface high shinning, chrome plated, satin, brushed or chrome plated - thisis still a question of individual taste. For the optic view of a complete bath of course thecontinous uniformity of fittings, profiles and other accessories is playing a formative role.

With Blanke•AQUA Profiles sophisticated functionality is perfectly combined with generous design - a large variety for each customers wishes.

Support:Blanke GmbH & Co. KG

Stenglingser Weg 68-70D-58642 IserlohnGermany

Telefon +49 (0)2374 - 507 0Telefax +49 (0)2374 - 507 42 00

E-Mail info@blanke-systems.deInternet www.blanke-systems.com w

ww

.ad-

hok.

com