SHARC8-1/2" MSi616 Fixed Cutter PDC

(215.9 MM) ID:6425410401 (215.9 MM) ID:6425410401 (215.9 MM) ID:6425410401 (215.9 MM) ID:6425410401 ER:20815 IADC:M223ER:20815 IADC:M223ER:20815 IADC:M223ER:20815 IADC:M223

FEATURESFEATURESFEATURESFEATURESBit design and performance have been certified through the validation process prescribed by IDEAS simulation technology.

Two rows of cutters provide superior stability and durability, and allow the bit to drill at maximum ROP for longer periods of time.

Exclusive cutter material and design ensures maximum durability for abrasive formations and extends bit life.

Blade and nozzle geometry are optimized for enhanced cleaning and maximum hydraulic efficiency.

The Smith High Abrasion Resistance Configuration (SHARC) bits are designed with the durability to withstand the demands of highly abrasive formations without sacrificing ROP.

SpecificationsSpecificationsSpecificationsSpecificationsTotal Cutters 59

Cutter Size 16mm (5/8")

Face Cutters (51) 16mm

Gauge Cutters (8) 16mm

Blade Count 6

Nozzles 3 Standard Series 60N, 3 Standard Series 40N

Bit Connection 4-1/2" API Reg.

Junk Slot Area (sq in) 8

Gauge Length: 2" Protection: Options Available

Length Make-Up: 10.695 Overall: 14.883

Fishing Neck Diameter: 6 Length: 4.231

Operating ParametersOperating ParametersOperating ParametersOperating ParametersRotary Speed Suitable for Rotary & PDM

Weight-on-Bit 4,000 To 26,000 (lbs) 1,818 To 11,817 (daN) 2 To 12 (Tonnes)

Flow Rate (GPM) 300 To 800

Hydraulic Horsepower (HSI) 1 To 6

Operating parameters are typical ranges. Please contact your Smith Bits representative for recommendations for your individual well.

Copyright © 2010 Schlumberger. All Rights Reserved.Date: 02/10/2009 Datasheet ID: 12274 www.smith.com