Production and General Engineering Division Council (PGDC)S.N. Organization Representing Members

1. IIT, Delhi Prof. S.R. Kale (Chairman)2. Addison & Co. Ltd., Chennai Shri S. Gnanasekaran

(Shri C. Venktesh)3. AIMIL Ltd., New Delhi Shri Sanjay Gupta

(Shri K.K.V. Yasas)4. Bhabha Atomic Research Centre, Mumbai Shri S.B. Jawale

(Shri A.K. Sinha)5. Bharat Earth Movers Ltd., Bangalore Shri Raghunath

(Shri Nagraj Desai)6. Bharat Heavy Electricals Ltd., Haridwar Shri Swapan Sarkar

(Shri Surinder Kumar)7. Bosch Ltd., Bangalore Shri Jagadeesh V.

Shri Murthy8. Central Manufacturing Technology Institute,

BengaluruShri M. Chellamalai(Shri V.G. Yoganath)

9. Confederation of Indian Industries, New Delhi Dr. Sarita Nagpal10. Consumer Guidance Society of India, Mumbai Dr. Sitaram Dixit

(Dr. M.S. Kamnath)11. Dte. General of Supplies & Disposal, New Delhi Shri M.M. Dubey

12. Dte. General of Quality Assurance, New Delhi Shri K. Parthiban(Dr. Gurmukh Das)

13. Dte. of Standardization, New Delhi Shri V.K. Chhabra/Sanjay Bajapai(Smt Sarika Sharma)

14. Hand Tools Manufacturers Association, Victor Forgings, Jalandhar

Shri Sukhdev Raj(Shri Ashwani Kumar)

15. HMT Machine Tools Ltd., Hyderabad. Shri M. Rajender(Shri BVSS Prasad)

16. India Meteorological Department, Pune Shri R.R. Mali(Shri K.N. Mohan)

17. Kanpur Metal Products, Noida Shri Naresh C. Vaish(Shri Gaurav Vaish)

18. Institution of Engineers (India) Dr. Wooday P. Krishna(Shri Devendra Gill)

19. MECON Limited, Ranchi Shri Ranjit Kumar(Shri Pankaj Kumar)

20. MSME-Tool Room (Central Institute of Tool Design), Hyderabad

Shri Shujayat Khan(Shri H. Venkatesh)

21. Min. of Consumer Affairs, New Delhi Shri B.N. Dixit (Shri Raj Kumar)

22. National Physical Laboratory, New Delhi Dr. A.K. Bandyopadhyay(Shri. Ajay Dhar)

23. National Test House, Ghaziabad Shri Y. Dhahenjaya(Shri R.N. Ram)

24. Office of the Development Commissioner, Small Scale Industries, New Delhi

Shri U.C. Shukla(Shri Kanwalinder Singh Sodhi)

25. Ordnance Factory Board, Kolkata Shri C.I. Maurya(Shri S.K. Saxena)

26. Projects and Development India Ltd., Noida Shri K.C. Kata (Retd)(Shri A.K. Gupta)

27. Instruments Research & Development Organization (IRDE), Dehradun

Shri J.K. Bajpai(Shri A.K. Sahani)

28. Sundaram Industries Ltd., Madurai Shri D. Jegannathan29. Survey of India, Dehradun Shri Mam Chand

(Shri U.N. Mishra)30. Titan Company Ltd., Hosur Dr. S. Loganathan

(Shri N.S. Balaji)31. Tata Motors Ltd., Pune Shri L. Muthukumar

(Shri R. Ramesh Kulkarni)

Chairmen of Sectional Committees as Ex-Officio Members of the PGDC

S.N. Name of Sectional Committee Name of the Chairman1. Basic Standards Sectional Committee,

PGD 01Shri. Thomas John,NPL, New Delhi

2. Metal Forming Machines Sectional Committee, PGD 04

Shri M. Rajender,HMT Machine Tools, Hyderabad

3. Pneumatic Tools Sectional Committee, PGD 08

Shri Shankar Bhaumik,DRDO, Pune

4. Abrasives Sectional Committee, PGD 09 Shri Niranjan Sahasrabudhe, Grindwell Norton Ltd., Mumbai

5. Bearings Sectional Committee, PGD 13 Shri S.K. Bose ,CET, SAIL, Ranchi

6. Consumer Products and Allied Equipment Sectional Committee, PGD 14

Brig. Ran Vijay Singh,CQA, Kanpur

7. Ergonomics Sectional Committee, PGD 15 Dr. A.K. Ganguly,Indian Ergonomics Society

8. Industrial and Production Automation Systems and Robotics Sectional Committee, PGD 18

Dr. D.N. Badodkar,BARC, Mumbai

9. Lubricating Equipment Sectional Committee, PGD 19

Dr. M.R. Tyagi,(In Personal Capacity)

10. Meteorological Instruments Sectional Committee, PGD 21

Shri R.R. Mali,Indian Meteorological Dept., Pune

11. Educational Instruments and Equipment Sectional Committee, PGD 22

Dr. Sukhvir Singh,NPL, New Delhi

12. Horology Sectional Committee, PGD 23 Shri R. Rajagopalan,Titan Co. Ltd, Hosur

13. Drawing Sectional Committee, PGD 24 Prof. Sunil Kale,IIT Delhi

14. Engineering Metrology Sectional Committee, PGD 25

Dr. K.P. Choudhary,NPL, New Delhi

15. Weights and Measures Sectional Committee, PGD 26

Shri B.N. Dixit,Ministry of Consumer Affairs, New Delhi

16. Mountaineering Equipment Sectional Committee, PGD 27

Col. H.S. Chauhan,Indian Mountaineering Foundation, New Delhi

17. Arms and Ammunition for civilian use Sectional Committee, PGD 28

Brig. Jai Dev Singh ,Controller, CQA,DGQA, Ichapur, West Bengal

18. Cutting tools Sectional Committee, PGD 32 Shri S. Gnanasekaran,Addison & Co. Ltd., Kanchipuram

19. Transmission Devices Sectional Committee, PGD 33

Shri Jagadish Arora,CET, SAIL

20. Hand Tools Sectional Committee, PGD 34 Shri A.K. Bathla,Central Institute of Hand Tools, Jalandhar

21. Machine Tools, Machine Tool Elements and Holding Devices Sectional Committee, PGD 35

Shri Shujayat Khan,Central Institute of Tool Design, Hyderabad

22. Fluid Power Systems Sectional Committee, PGD 36

Shri. S. Shakir Ali,ONGC, Dehradun

23. General Engineering and Fasteners Standards Sectional Committee, PGD 37

Shri N. Srinivasa Murthy,(Personal Capacity)

24. Metal Containers Sectional Committee, PGD 38 Dr. N.C. Saha,Indian Institute of Packaging,Mumbai

Basic Standards Sectional Committee, PGD 01

Scope: (a) Formulation of Indian Standards on terminology, units, quantities, symbols and other basic subjects of general applicability to all Division Councils.

(b) Formulation of Indian Standards for preferred numbers.

S.N.

Organization Representing Members

1. National Physical Laboratory Shri Thomas John2. Bhabha Atomic Research Centre Shri Debashis Das

Dr. V.H. Patankar4. Central Manufacturing Technology Institute Shri Mohan Raj

Shri Krishna Rathod6. Central Mechanical Engineering Research Institute Dr. Avik Chatterjee

Dr. Pradeep Rajan,8. Defence Metallurgical Research Laboratory(DMRL) Dr. Tapash Nandy

Shri Manivel Raja10. Delhi Technological University (Delhi College of

Engineering)Dr. Nirendra DevDr. A. K. Haritash

12. Delhi Metro Rail Corporation Shri N.K. KothariShri A.S. Bisht

14. Dept. of Science and Technology Shri S. Mubashir15. Directorate of Standardization

Ministry of Defence (Govt. of India)Shri Satvinder SinghShri K.L. Arora

17. FICCI Federation House Shri E. Sunder18. HMT Limited Shri A. Shantaram

Shri S.L. Nahar20. Indian Institute of Science Centre for Product and

ManufacturingProf. Amaresh ChakrabartiDr. M.S. Bobji

22. Indian Society for Technical Education Dr. S. Basil GnanappaProf. R. Hariharan

24. Indian Statistical Institute Shri U.H. AcharyaShri P.R. Lakshmikantha

26. National Accreditation Board For Testing &Calibration Laboratories

Shri N. VenkateswaranShri. Avijit Das

28. National Test House Shri P. KanjilalShri Anil Chopra

30. Netaji Subhash Institute of TechnologySchool of Applied Science

Prof. L.S. Tanwar

31. Research Designs & Standards Organization Shri K.S. Chander32. Solid State Physics Laboratory Shri Sushil Kumar

Dr. Murlidharan34. Tata Motors Ltd.

Engineering Research CentreShri L. MuthukumarShri R. R. Kulkarni

36. Indian Institute of Technology, Delhi Dr. Harish Hirani

37. University of Allahabad Prof. V.K. JaiswalProf. V.K. Agarwal

39. Birla Precision Technologies Limited Shri D.K. TrivediShri R.K. Uppal

41. Rockwell Automation Sriram Parmanand42. Hilti India Pvt. Ltd. Shri Prashant Dasharath

SatheMs. Kamalika Kundu

Metal Forming Machines Sectional Committee, PGD 04

Scope: Standardization in the field of various technical aspects of metal forming machines both by hot and cold processes and their machines (Presses, press brakes shears, shear blades, moulds, forging machines, nibs and dies for wire and tube drawing operations etc. and their related tooling).

S.N. Organization Representing Members1. HMT Machine Tools Ltd.,

HyderabadShri M. Rajender, Chairman

2. Autocomp Corporation Panse Pvt Ltd, Rudrapur

Shri S.H. RazodeShri Jaidev Prakash

3. Bharat Dynamics Ltd, Hyderabad

Shri K.V. Subba Reddy

4. Bharat Heavy Electricals Ltd, Bhopal

Shri Deepak Makhija

5. Central Institute of Plastics Engineering & Technology, Chennai

Shri Lalit Guglani

Shri Avneet Kumar Joshi

6. Central Institute of Tool Design , Hyderabad

Shri J. BramheswaraiahShri V. Ragurami Reddy

7. DGS&D, New Delhi Shri V.K. Verma8. Econ Metallic India Pvt Ltd,

MohaliShri Sandeep Chugh

9. Engineering Staff College of India, Hyderabad

Dr. D.N. ReddyShri D. Seshadri

10. ITI Limited, Bangalore Shri SwamidasShri Ram Gopal

11. ISGEC Heavy Engineering Limited, Yamunanagar

Shri D.K. Awasthi

12. Mahindra CIE Automotive Ltd, Rudrapur, Uttarakhand

Shri Subodh TripathiShri Pradeep Sharma

13. Maruti Suzuki India Limited, Gurgaon

Shri Sanjay ThakarShri Sandeep Gupta

14. Rites Ltd, Gurgaon Shri Rajiv MilindShri Rajesh Aggarwal

15. Tata Motors Limited, Pimpri, Pune

Shri H.J. AnawkarShri Sanjiv Krishna

16. Wheels India Ltd, Chennai Shri S. Mathiyalagan

Shri S. Prakash

Pneumatic & Hydraulic Tools Sectional Committee, PGD 08

Scope: Standardization in the field of portable type Hydraulic/Pneumatic tackles, tools and accessories

S.N. Organization Representing Members1 Research & Development

Establishment (Engineers), RDSO, Pune

Shri Shankar Bhaumik, Chairman

2 Atlas Copco (India) Ltd, Pune Shri V. GovindrajuShri Sridhar Naik

3 Bhilai Steel Plant (Sail), Bhilai Shri S. RoyShri R.S. Chauhan

4 Bharat Heavy Electrical Limited, Hyderabad

Shri M. RaviMs B. Sulochana lakra

5 Border Roads Organization, New Delhi

Shri Pankaj Bhatnagar

6 Directorate General of Quality Assurance (Engg. Equipt.), New Delhi

Dr. Gurmukh DasShri G. Aravindan

7 Directorate General of Supply & Disposal, New Delhi

Shri R.D. SivasaranShri D.N. Gaur

8 Directorate of Standardization, Min. of Defence, New Delhi

Col. K.K. KaushalShri N. Gunasekharan

9 IEC Dusterloh Pvt. Ltd. Shri S.R. JagtapShri Rajesh K. Dastane

10 Indian Institute Of Technology, Roorkee

Dr. Apurbba Kumar SharmaDr. Manas Mohan Mahapatra

11 Ingersoll Rand Wadco Tools Limited, Sahibabad

Shri Munish NalwaShri b. Anoop Kumar

12 ONGC Ltd, Dehradun Shri s. Shakir AliShri A.K. Aggarwal

13 Rites Ltd, Gurgaon Shri S.C. SinghalShri Rajnish Ahuja

14 Sandvik Asia Pvt. Limited, Muthangi, AP

Shri Rangayya Naidu

Abrasives Sectional Committee, PGD 09

Scope: Standardization in the field of coated abrasives, grinding wheels and diamond/cubic boron nitride abrasive tools

S.N. Organization Representing Members

1. Grindwell Norton Ltd., Mumbai Shri. Nirajan Sehasrabudhe, ChairmanShri Ajay Deshpande

2. Research & Development Estt. (Engrs), Pune

Shri V.V. ParlikarShri G.K. Sarkar

3. Bosch Limited, Bangalore Shri Rajesh N.Shri Subrahamanya

4. Carborundum Universal Ltd, Chennai Shri Ramesh KalyanaramanDr. Deval Yogendra Vasistha

5. Director General of Quality Assurance, New Delhi

Lt. Col. Mahendra PrasadLt. Col. C.B. Prasad

6. Dte. Of Standardization, Pune Col. R. PuriLt. Col. B.S.Nagraja

7. Emery(India) Pvt Ltd, Jamnagar Shri Sanjiv SwarupShri C. Chakochan

8. Industrial Diamond Association of India, Mumbai

Shri Hemant M. ShahShri Girish K. Zaveri

9. Ordinance Factory, Kolkata Shri Rakesh Ojha10. Sterling Abrasive Pvt. Ltd., Ahmedabad Shri V. Mandani11. Tata Motors Ltd., Pune Shri V.V. Kirtane

Shri C.S. Prasad12. SKF machine manufacturer Shayn Datye13. FAG, Schaffler machine manufacturer H.J. Shah

Gopalakrishnan Sthyanarayanan14. LBCR Corporation Santosh Anant Potnis

Bearing Sectional Committee, PGD 13

Scope: Formulation of standards for rolling element bearings and hydromechanics bearing (including plain, thrust bush bimetallic, hydrostatic bearing and hydro dynamic bearings etc.)

S.N. Organization Representing Members1. Centre for Engineering and Technology

(CET), SAIL RanchiShri S.K. Bose, Chairman

2. Bajaj auto Ltd., Akurdi, Pune Shri S.D Gupta

3. Bharat Heavy Electricals Limited, Hyderabad

Shri Manish Agrawal

Shri U. Sridhar5. Bimetal Bearing Limited, Coimbatore Shri R.S. Mani

Shri Raveendra6. Controllerate of Quality Assurance

(Vehicles), DGQA, AhmednagarShri P.J. WanjariJt ControllerShri R.K.Tolambiya

8. DMRL, Bengaluru Satyapal SinghDr. Manish Roy

10. Directorate of Standardization,New Delhi (CQASV)

Controller (CQASV)

Jt. Controller (CQASV)Dy. ControllerShri R.P. Sonavane

12. Ducom Instruments (Pvt.), Limited, Bengaluru

Shri. N.M. Dube

13. Escorts Limited, Faridabad Shri Neeraj VijShri Alok Kumar

15. Schaeffler India LtdFAG Bearings India Limited, Vadodara

Shri Trilochan Singh BhatiaShri Devkumar Devsagar

17. GKN Sinter Metals Private Limited, Pune Shri Dayasagar Mrig

18. Hindustan Aeronautics Limited, Bangalore Shri T. H. GonsalvesDr. C.H. KannaBabuDr. T.R Ranjana

21. ILJIN Bearings Co ltd Shri Dharmendra Parmar

22. Kanpur Metal Products, Kanpur Shri N.C VaishShri Gaurav Vaish

23. KSPG Automotive (P) Limited , Pune Shri Rajaram Mane

24. Maruti Suzuki India Limited, Gurgaon Shri Rakesh KhangerShri Prashant BhardwajShri Ram Kumar S.

26. National Engineering Industries Limited, Jaipur

Dr. Lokesh AgarwalMr. Avinash Sharma

27. NRB Bearings Limited, Thane Shri Milind GhanShri Prakash BanaitMr. Kohli/Mr.Antapur

28. National Aerospace Laboratories, Bangalore

Dr. Soumendu Jana

29. Research, Designs & Standards Organization, Lucknow

Shri Vijay Kumar Goel

30. SKF Bearing India Limited, Pune Shri Vijay Apte

31. IPSS, SAIL new Delhi Shri Virendra KumarShri A.M. DannyShri Gulshan KumarShri V.K. Pal

33. Tata Motors Limited, Pune Shri R.R.Kulkarni

34. Tata Steel Limited (Bearing Division) Kharagpur

C. Srivatsan

Mr. Pravin Dixit

Consumer Products and Allied Equipment Sectional Committee, PGD 14

Scope: Standardization in the field of: All types of (a) Fasteners for Consumer Goods; (b) Hair Cutting, Shaving and Shearing Equipment; (c) Umbrella & its Components, and (d) Miscellaneous Consumer Products not covered under any other Committee

S.N. Organization Representing Members1. CQA (T&C), Kanpur Brig. Ranvijay Singh, Chairman2. Altek Beissel Needles Limited, Kanchipuram

DistrictShri V.S. RavichandranShri G. Jaganathan

4. Consumer Guidance Society of India, Mumbai Shri Sitaram DixitDr. M S Kamath

6. Consumer Association, Palakkad Shri Surendran P.A.Dr. T. Balachandran

8. DGQA, Ministry of Defence, Kanpur Shri A. ChowdhuryShri Arvind Kamthane

10. Directorate General of Supplies and Disposal (DGS&D), Delhi

Sh. A. Tirkey

11. Footwear Design and Development Institute (FDDI), Noida

Smt. Rina GuptaShri Arjun Prasad

13. Sky Industries Limited, Navi Mumbai Shri Shailesh ShahShri Maikal Raorani

15. National Test House , Kolkata Shri R.K SainiShri A. Verma

17. Office of Development Commissioner (MSME) , New Delhi

Shri Kanwalinder Singh SodhiShri K.K Funda

19. Ordnance Parachute Factory, Kanpur Shri Arun Kumar VermaShri Vijay MadhukarBagade

21. Southern Group Industries (P) Limited, New Delhi

Shri B.P. MaheshwariShri G Vishnu Vardhan

23. Spencer India, New Delhi Shri K.S. BhatiaShri Taranpal Singh

25. Tex Corp Limited Gurgaon Mr. Sanjay AggarwalShri Vijay Toley

27. Textile Committee, New Delhi Shri G.S.ParasharShri Rahul SwaroopVerma

29. Vestal Manufacturers and Traders, Aligarh Shri Vinod Kumar GargShri Varun Garg

31. YKK India Private Limited, District Rewari Shri Sanjeev MehanShri Kuldeep Dahia

33. Zip Industries Pvt. Ltd., Chennai Shri D. ParthibanShri Vinod Sandhu

Ergonomics Sectional Committee, PGD 15

Scope: Standardization is the field of ergonomics including terminology, technology, methodology and human and other factors related to ergonomics common to all the sphere of life.

S.N. Organization Representing Members1. In Personal Capacity Dr. A.K. Ganguli, Chairman2. In Personal Capacity Prof. G.G. Ray3. IIT Guwahati Prof. Debkumar Chakrabarti

4. Indian Institute of Technology, BombayProf. N. SadhuProf. Mander Rane

5. Indian Institute of Science, BangaloreDr. Dibakar SenDr. Pradipta Das

6. Indian Institute of Technology, ChennaiProf. Venkatesh BalasubramanianDr. T.T. Narendran

7. National Institute Of Design Ahmadabad Dr. Subir Das

8. Bokaro Steel Plant Dr Trinath Panchal

9.Vidyasagar University, Midnapur, West Bengal

Prof. Prakash Chandra Dhara

10. ICAR, Bhopal Dr. C R MehtaDr. K.N. Agrawal

11.Assam Agricultural UniversityDepartment of Family Resource Management

Prof. Nandita Bhattacharyya

Dr. Abhijit Borah

12. Consumer Guidance Society of India Dr. Sitaram DixitDr. M.S. Kamath

13.National Institute of Industrial Engineering (NIITE) Mumbai

Dr Rauf Iqbal

Dr Vivek Khanzode

14.Dept. of Family Resource Management, Haryana

Dr. S.S. Gandhi

15.

Home Science College and Research Institute,Tamil Nadu Agricultural University, Madurai

Dr. P. Parimalam

16. ARAI, Pune Mr. A.V. Mannikar17. Godrej Interio Mumbai Mr Nirav Shah18. In personal capacity Dr Amitabh De19. In personal capacity Dr. L.P.Gite

20. WIPROShri Vipul KumarShri Shiva Kumar

21. DGFASLI, Mumbai Dr. S.S. WagheDr. Sudhanshu Saini

22. Mahindra & Mahindra Shri Ganesh Dharmar

23. Tata Motors Tech GroupShri Vinit S. EkboteShri G. Ramchand

26. In personal Capacity Dr. R.G. Rajhans

27. University of Calcutta Dr. Somnath Gangopadhyay

Industrial and Production Automation Systems and Robotics Sectional Committee, PGD 18

Scope: Standardization in the field of industrial automation systems and integration concerning discrete part manufacturing and encompassing the application of multiple technologies i.e. information systems, machines, equipment communication (Bus communication, telecommunication etc. excluded): - Process automation - Electrical electronics equipment - Programmable logical controllers for general application - Sensors

S.N. Organization Representing Members1. BARC, Mumbai Dr. D.N. Badodkar, Chairman

Shri K. Jayarajan

3. Automation Industry Association Shri Anup Wadhwa

Dr. Ranjit Dante

5. Bharat Dynamics Limited, Hyderabad Shri K.V. Subba Reddy

Shri K. Vishweshwar Rao

7. Bharat Electronics Ltd., Bangalore Shri Venugopal P.G.

8. Bharat Fritz Werner Ltd., Bangalore Shri N. Hariharan

Shri Syed Shareef

10. Bharat Heavy Electricals Ltd, Tiruchirappalli Dr. A. Raja

Shri D.K. Verma

12. Bosch Rexroth (India) Ltd., Ahmedabad Shri Mukesh Dodiya

Shri Prashant Katkar

14. Central Manufacturing Technology Institute, Bangalore

Shri S K Verma,

Shri V G Yoganath

16. Centre for artificial intelligence & Robotics, Bangalore

Dr. P. Muralikrishna

Dr. S. Sahoo

18. Electronics Corporation of India Ltd., Hyderabad

Shri N.P.R. Sharma

Shri K. Ramesh Prasad

20. Fanuc India Private LimitedBangalore

Shri C.J. Alexander

Shri Rajasekhar Reddy

22. FESTO Controls Pvt. Ltd., Bangalore Shri Kumar N.G.

23. HMT Ltd., Bangalore Shri N. Somasundaram

Shri B. Muralidhar

25. IIT Bombay Shri Anirban Guha

26. Indian Institute of Technology Delhi Prof. S.K. Saha

Dr. Sunil Jha

28. Indian Institute of Technology Madras Prof. T. Asokan

Dr. Somashekhar Hiremath

30. MCEME, Secunderabad Col. Rajesh Gandhi

31. Indian Institute of Technology Kanpur Dr. Ashish Dutta

32. National Institute of Ocean Technology (NIOT), Chennai

Shri N. Vedachalam

33. The Robotics Society of India Prof. (Dr) Shantipal S. Ohol

34. Siemens Ltd. (CII), Mumbai Shri Manoj Kumar Belgaonkar

Shri JayeshBhavsar

Shri Prasad Raverkar

37. Tata Motors Ltd., Pune Mr. Narayan N. Chavan

Shri S.C. Nandi

39. Crompton Greaves Ltd, Nasik Shri P.K. Datta

40. PARI Robotics, Pune Shri Vivek Kulkarni

41. Prefint Health CarePvt LtdChennai

Shri K. Puhazhendi

42. In Personal Capacity Prof. M. Singaperumal

43. Schmersal India Pvt Ltd, Dist. Pune Shri Sanjeev Kumar Pandey

44. B & R Industrial Automation, Pune Mr. Praveen Vaidya

Shri Ninad Deshpande

46. IGCAR Kalpakam Shri .A. Venkatesan

47. SASTRA Robotics India Pvt Ltd Shri Achu Wilson

48. Rockwell Automation (I) Pvt Ltd, Mumbai Shri Vishwesh Anantharaman

49. CSIR-Central Mechanical Engineering Research Institute

Dr. Sambhunath Nandy

Dr. Ranjit Ray

Lubricating Equipment Sectional Committee, PGD 19

Scope: Formulation of standards on lubricating equipment, systems and accessories

S.N. Organization Representing Members1. In Personal Capacity Dr. M. R Tyagi, Chairman2. AFMC Lubrication Pvt. Limited, Kolkata Shri Ananda Swarup Sur

Shri Probir Kumar Sur3. Balmer Lawrie & Co. Ltd. Dr. Balaram Ghosh

Shri Sushant K Roy4. Bharat Heavy Electricals Limited,

Haridwar,Shri Anuj JainShri H.S. Dogra

5. Bharat Petroleum Corporation Ltd, Mumbai, Mumbai

Dr. Tarunender SinghShri D.K. Jha

6. Bhilai Steel Plant, Bhilai Shri S. GopalakrishnaShri Pramod Kumar Agrawal

7. Cenlub Industries Ltd, Faridabad Shri V. K. Mittal8. CET, IPSS, SAIL Shri Shravan Pradhan9. Central Mechanical Engineering

Research Institute , Durgapur,Shri Naresh Chandra MurmuDr. Pranab Samanta

10. Centraline Lubro-Tech Engg. Pvt. Limited, Pune

Shri Shatul ShahShri Rushil Shah

11. Del Pd Pumps & Gears Pvt Ltd , District Surendra Nagar

Shri N. DeliwalaShri Atul Kalra

12. Directorate of Quality Assurance (Engg.& Equipment), New Delhi

Lt. Col. P.V. JeevantLt. Col. Santanu Roy

13. Durgapur Steel Plant, SAIL Durgapur Shri Samir Kumar ChakravortyShri K C Jeothy

14. ELGI Equipments Limited, Coimbatore Shri Mahesh KumarShri Kathir Velan

15. Heavy Engineering Corporation Ltd, Ranchi

Shri P.R.K.sinhaShri Ram Janam Prasad

16. Hindustan Petroleum Corp Ltd, Mumbai Shri J SamuelShri J Shankar

17. Indian Institute of Petroleum, Dehradun, Shri G.D.ThakreShri M.K. Shukla

18. Indian Oil Corporation Limited, Mumbai Shri R.R. KulkarniShri Samratdas

19. Lincoln Helios (India) Limited , Bangalore, Karnataka

Shri Sandip SenShri S K Murthy

20. MECON Limited, Ranchi Shri B.D. GhoshShri R. Oberoi

21. Oil & Natural Gas Commission, Dehradun,

Shri S. Shakir AliShri A K Aggarwal

22. Steel Authority of India Ltd (R & D Centre for Iron & Steel, Ranchi

Shri Chiranjan Mandal

S.N. Organization Representing Members23. Tata Steel Ltd, Jamshedpur Shri Falguni Mitra

Shri Uma Shankar Singh

Meteorological Instruments Sectional Committee, PGD 21

Scope: Preparation of standards for rain gauges; air measures; anemometers; windvanes; Psychrometers; thermometer screen (Single and double); Evaporimeters; barometers; thermographs; hygrograph barographs etc.

S.N. Organization Representing Members

1. India Meteorological Dept., Pune Shri R.R. Mali, ChairmanShri P.N. Mohanan

2. Central Scientific Instruments Organization (CSIR), Chandigarh

Shri V.P.S KalsiShri C.J Rao

3. Central Water Commission, New Delhi Shri Anupam PrasadShri V.D. Roy

4. Directorate of Naval Oceanology & Meteorology, New Delhi

Cdr Subodh KumarCdr Ramesh Mattas

5. Dynalab Weathertech Pvt. Ltd. Pune Shri G. VenugopalShri A.K. Gangopadhyay

6. Hindustan Clock Works, Pune Shri Shrirang J. AgasheShri Balraj Agashe

7. Hydromate Instruments , Ahmedabad Shri Dilip R. PatelShri R.V. Oza

8. Indian Agriculture Research Institute , New Delhi

Dr. Deb Kumar DasDr. Vinay Kumar Sehgal

9. Indian Air Force , New Delhi Air Vice Marshal KS Babu

10. Ingen Technologies Pvt. Limited, Kanpur Shri Sonu Agrawal

11. J.R.Mullick & Co. (P) Ltd.,Mumbai Shri Mahesh Chandra MullickShri Prashant Mullick

12. Kumar Traders, Pune Shri Kumar Thorat

13. Lawrence & Mayo (India) Pvt. Ltd., New Delhi/Pune

Shri J. MendonsaShri G V D` Souza

14. New Techno lab Instruments, Nasik Shri Pramod Karande

15. Ramkala, Pune Shri S.R. KarandikarShri Sidhartha Karandikar

16. National Environmental Engineering Research Institute, Nagpur

Dr. T.V.B.P.S. Ramakrishna

17. National Institute of Oceanography (CSIR), Panaji

Dr. M.R. Ramesh Kumar

18. Office of the Director General of Civil Aviation, New Delhi

Shri R.P. SahiShri Rajeev Gaur

19. Pawan Rubbers Shri Hemant Thakkar

20. Punjab Agriculture University Ludhiana Dr. Lakhvir Kaur DhaliDr. Barun Biswas

21. SGS Weather and Environmental Systems Pvt. Limited, New Delhi

Shri Vipin Gandhi

Educational Instruments and Equipment Sectional Committee, PGD 22

Scope: (a) Formulation of standards for instruments and equipment for school and college Laboratories. (b) Formulation of standards for surveying instruments, drawing instruments; Optical instruments (excluding medico - optical instruments) and their components and materials.

S.N. Organization Representing Members1. National Physical Laboratory New Delhi Dr. Sukhvir Singh, Chairman

2. Central Scientific Instruments Organisation, Chandigarh

Dr. Pawan KapurDr. S. V. Ramagopal

3. Controlleratte of Quality Assurance (Instruments)

Shri K. ChandrasekaranShri Virendra Singh

4. Directorate of Standardization, New Delhi Secretary, EESCJD (STD)

5. Educational Consultant of India Ltd. , Noida

Pradeep K S ShishodiaNandeesh Babu M.G.

6. Geodetic and Research Branch Survey of India, Dehradun

Shri Mam ChandShri S.K. Maithani

7. Instrument Research and Development Establishment (IRDE), Dehradun

Subhash Chander KumarK.K. Kailasia

8. Instruments Design Dev and Facilities Centre, Ambala Cantt

Shri J K S GangwarShri Rameshwar Das

9. Kendriya Vidyalaya Sangathan, New DelhiShri Avinash DikshitSmt. A.N. SiddiqueShri T.R. Sharma

10. Kohinoor Slides Rules Fabrik (p) Ltd., Varanasi

Shri Jeet Raj MankhandShri Rajgaurav Mankhand

11. Malaviya National Institute of Technology, Jaipur

Prof A.K. BharadwajProf I.K. BhatDr. A.B. Gupta, Dr. A.P.S Rathore

12. Ministry of Science & Technology, New Delhi

Dr. Laxman PrasadShri D. Prasad RajuShri Sanjay Bajpai

13. National Council of Educational Research & Training (N.C.E.R.T), New Delhi

Dr. Gagan Gupta

Prof. Alka Mehrotra14. National Science Centre, New Delhi Shri A.S. Manekar

15. Office of the Development Commissioner (MSME), New Delhi

Shri Umesh ShuklaShri Kanwalinder Singh Sodhi

16. Rohem Instruments Private Limited, Nasik Shri R.N. Mukerjee

17. The Ambala Scientific Instruments Manufacturers Association, Ambala Cantt.

Shri Ashwani GoelShri Puneet Gupta

18. Towa Optics (India) Pvt. Ltd., New DelhiShri C.L. BatraShri Rajesh K. Batra

S.N. Organization Representing Members19. Indian Association of Physics Teachers,

DelhiDr. Mamta

20. Industrial Design @ Product Design, IIT Delhi Shri Lalit Kumar Das

Horology Sectional Committee, PGD 23

Scope: a) Formulation of standards for time measuring, time keeping and time recording devices

S.N. Organization Representing Members

1. Titan Company Limited Shri R. Rajagopalan, Chairman2. Board of Radiation and Isotope Technology,

Navi MumbaiShri S. RaviShri Mathew K.M.

3. Classic Dials Pvt. Ltd. Shri Vivek Jain4. Controllerate of Quality Assurance (I) ,

DehradunLt. Col. R. RaviShri V.S. Sagar

5. Kamla Dials Devices Ltd., Bengaluru Shri Jayasimha G.Shri Satish B.

6. Office of Divn. Commissioner, Min. of MSME, New Delhi

Shri K.L. RaoShri K.K. Funda

7. Purewal & Associates Ltd., Solan Shri H.S. PurewalShri S.P. Goplakrishna

8. Sona Group, Bengaluru Shri Yajna KammajeShri Chandrasekharan C.

9. Surface Modification Technologies Pvt. Ltd., Mumbai

Dr. Umesh MhatreShri Jimmy Chheda

10. Timex Group India Ltd., Noida Shri Rajesh Sujan11. Titan Company Limited, Hosur Shri S. Loganathan

Shri Balaji N.S.12. In personal capacity, Mumbai Dr. N. Sivaparasad

Drawings Sectional Committee, PGD 24

Scope: Formulation of code of practice for general engineering drawings and related standards

S.N.

Organization Representing Members

1. Indian Institute of Technology, Delhi Dr. Sunil R. Kale, Chairman2. Bharat Heavy Electricals Limited, Bhopal Shri Amulya Deota

Shri Lalit Kumar4. Bosch Limited, Bangalore Shri Murthy

Shri Kumaraswamy S.

6. Controllerate of Quality Assurance (Engg. Equipment), Pune

Shri P.P. Maheshkar

Shri N. Sarvanan

8. Engineers India Limited, New Delhi Shri Rajanji SrivastavaShri M. Ismaeel

10. Fluid Power Society of India, Bangalore Shri T.S. Venkatesha Murthy11. Institution of Engineers (India), New Delhi Shri R.C. Bairathi

Shri Devendra Gill13. National Institute of Technology, Tiruchirappalli Dr. V. Senthil Kumar14. RITES Limited Ms. Rita Patial

Shri Lalit Kumar

16. John Deere India Pvt. Ltd., Mumbai Shri Raghavendra N. Magadum17. In personal Capacity – Tiruchirappalli Dr. R. Vasudevan

Engineering Metrology Sectional Committee, PGD 25

Scope: Formulation of standards on limits and fits and on gauges for plain and threaded work pieces; precision measuring equipment; surface finish and other allied items.

S.N. Organization Representing Members1 National Physical Laboratory, New

DelhiDr. K.P. Chaudhary, Chairman

2 Accurate Engineering Company Pvt. Ltd., Pune

Shri Aditya SalunkeShri Aslam R. Sayyed

4 Advance Measuring Systems, Kolhapur Shri P.K. SawantShri Vikram Sawant

6 Automotive Research Association of India (ARAI), Pune

Shri M.S. Kurane

Shri S.C. Ganganhalli

8 Bagson, Delhi Shri M.L. BaggaShri Vivek Bagga

10 Baker Gauges India Ltd., Pune Shri Anis S. Karmawala11 Bharat Dynamics Ltd., Hyderabad Sh. K.V. Subba Reddy

Sh. V. Ramanarayana13 Bharat Heavy Electricals

Ltd., TiruchirapalliShri M. Chandra Sekhar

14 Central Manufacturing Technology Institute, Bangalore

Sh. P.V. Sashi Kumar

Sh. V. Anantha Padmanabha Sarma

16 EmmTech Calibration Pvt. Limited, Faridabad

Shri N.K. Soni

17 Indian Meteorological Department (IMD), Pune

Shri P.A. Kore

18 Kudale Calibration Laboratory Pvt. Ltd., Pune

Shri C.M. Puntambekar

19 Mikronix Gauges Pvt. Ltd., Aurangabad Shri Abhay HanchanalShri Sudarshan Bubane

21 Mitutoyo South Asia (P) Ltd., New Delhi

Shri Shailendra Kumar SinghShri Shiva Kumar Tiwari

23 National Accreditation Board of Laboratory, Gurgaon

Shri Avijit Das

24 Octagon Precision (India) Pvt. Ltd., Pune

Shri Vivek N. GhodkeShri Mohan G. Kale

26 Oil India Safety Directorate, Noida Shri Rakesh Agrawal27 Reliance Calibration Laboratory, Pune Shri H.N. Patil28 Size Control Gauges & Tools Pvt. Ltd.,

PuneShri Ashok Shankar DurveShri Atul Ashok Durve

30 Sushma Industries Pvt. Limited, Bengaluru

Shri R. Sadanand MurthyShri Suveer Sadanand

32 Tata Motors, Pune Shri Shivaprasad MohiteShri Nitin Baji

34 Unik Gauges & Tools Calibration Shri Nandkumar Mane

Laboratory, Pune Mrs. Vandana Deshmukh36 In Personal Capacity, (Pune) Shri O.M. Modak37 In Personal Capacity, (Pune) Shri Agashe Krishnaji Prabhakar

Weights and Measures Sectional Committee, PGD 26

Scope: Formulation of standards for weights, measures, weighing and measuring equipments intended to be used in transactions or for industrial production or for protection.

S.N. Organization Representing Members1. Deptt of Consumer Affairs (Deptt of Legal

Metrology), New Delhi Shri B.N. Dixit (Chairman)

2. Itron India Pvt. Ltd. NoidaActaris Industries Pvt limited, Mumbai

Shri Praveen AswaniShri W.U. Khan (Noida)

3. Avery India Ltd., Ballabgarh Shri Basant SandoojaShri H.K. Vaish

4. Bharat Petroleum Corpn. Ltd. Mumbai Shri Amit KumarShri Pradeep Goyal

5. Confederation of Indian Industry (CII) , New Delhi

Ms Upsana Seth SetyaD.S.Chadha

6. Controller of Legal Metrology(Weights & Measures) , Hyderabad

Smt. Tejdeep Kaur Menon, IPSShri G.V. Raganadha Swami

7. Deptt of Consumer Affairs (Deptt of Legal Metrology), New Delhi

Shri R.K TyagiShri A.Singh

8. Deptt. Of Legal Metrology (Govt. of Haryana), Ambala Controller of Legal Metrology

9. Directorate of Quality Assurance New Delhi Col. V.V. KadamShri K.M. Madhusoodanan

10. Dte of Standardization, Min. of Defense , New Delhi

Shri V.K. ChhabraShri S.K. Saxena

11. Fluid Control Research Institute, Palghat Shri Ram Mohan S.Shri K.G. Sivaprakash

12. Gail India Limited , New Delhi Shri Raman ChadhaShri A.K.Tripathi

13. Hyderabad Tulaman Ltd., Hyderabad Shri Narne PrabhakarShri Ajay Narne

14. Indian Institute of Technology, New Delhi Dr. P. Venkateswara RaoDr. R. Sagar

15. National Dairy Development Board , Anand Shri A.B. GhoshShri Santosh Singh

16. National Physical Laboratory, New Delhi Shri Anil KumarShri Gautam Mandal

17. National Test House(Hqrs) , Kolkatta Shri D. BhattacharjeeShri L.P. Yadav

18. Office of the Controller of Weight & Measures , Govt. of NCT, Delhi

Shri D.P. DwivediShri Rajpal Singh

19. Oil Industry Safety Directorate, New Delhi Shri K.C.NandiShri Rakesh Agrawal

20. Petroleum and Natural Gas Regulatory Board, New Delhi

Shri Deepak SawantShri R.K. Zutshi

21. Shanker Wire Products Industries Deoghar Shri Nanda Kishore SinghaniaShri Shekhar Singhania

22. Hindustan Petroleum Corporation Shri Sukumar NandiShri P.N. Kanth

23. Bharat petroleum corporation ltd, Noida Shri Santonu Purohit

Mountaineering Equipment Sectional Committee, PGD 27

Scope: Standardization in the field of mountaineering, skiing, adventure sports and recreational equipment

S.N. Organization Representing Members1. Indian Mountaineering Foundation Col H.S. Chauhan

2. Vice President IMF Wg Cdr Choudhary3. Army Adventure Wing Director

4. Atal Bihari Vajpayee Institute of Mountaineering Director5. High Altitude Warfare School The Commandant6. Himalayan Mountaineering Institute Principal7. Indo Tibetan Border Police The Commandant

8. Jawahar Institute of MountaineeringPrincipal

9. Nehru Institute of Mountaineering Principal

10. Outdoor School Shri Mohit Oberoi11. Sonam Gyatso Mountaineering Institute Principal12. Swami Vivekanand Institute of Mountaineering Principal13. Trekko Equipment Shri Nagesh Sethi14. Development Board Director15. Border Seciruty Force IG (Training) Officer

16. Controllerate of Quality Assurance (GS)Shri M SatyanarayanaShri M.V. Kumbhalkar

18. Defence Material & Stores Research & Dev. Estt. Director

19. Defence Research and Development Organization Shri R. Shankar20. Master General Ordnance Branch(MGO) CEO21. Paramount Enterprises Shri Praveen Kumar Anand22. Snow & Avalanche Study Estt. Director23. Thanawala & Co.

MumbaiSh H.M. Thanawala

24.Ministry of Defence (DGQA) CQZ(Textile & Clothing)

Shri M.V. Kumbhalkar SSO-1

25. Brig K KumarAVSM

In-Personal Capacity

26. Brig Ashok Abbey In-Personal Capacity

Arms and Ammunition for Civilian Use Sectional Committee, PGD 28

Scope: Preparation of standards for fire arms and ammunition for civilian use besides sporting arms and ammunition.

S.N. Organization Representing Members1. Controllerate of Quality

Assurance(SA), IchapurBrig Jai Dev Singh, ChairmanShri A C Goyal

2. Ammunition Factory, PuneGM ammunition factory. Kirkee

Shri S K MishraShri S.V.Bhate

3. Bureau of Police Research & Development, New Delhi

Dr. N.S. PandeyShri Y.K.Sharma

4. Controllerate of Quality Assurance(Metal), Ichapur

Shri S.K. KhilnaneyShri M K ShrivastavShri S Murugesan

5. Dte of Standardisation, Ministry of Defence, New Delhi

Shri S.K. SaxenaGp. Capt. B. Bose,Lt. Col. G.S. Nagar

6. ISW Guns Pvt. Ltd., Kolkata Shri Girish Chandra SharmaShri Charanjit Singh

7. Micro and Small Enterprise Development, Karnal

Shri Ram Prakash VaishyaShri B.N. Kapur

8. Ministry of Home Affairs , New Delhi, arm(legal)

Shri Moloy SanyalShri A.S. Panwar

9. Rifle Factory(Arms Side), Ichapure Shri P.K. DasShri Ajay Prabhakar

10. SQAE (ME), Itarsi Smt S.S. KakadeShri M.S. Bhalawi

11. The Indian Hume Pipe Co. Ltd., Mumbai

M GeorgeShri S.P. Makhija

12. Gun & Shell Factory, Cossipore, Kolkata

Shri D K MittalRathin Kumar Das

13. Terminal Ballistics Research Laboratory, Chandigarh

Smt I. BiswasDr. D. Bhattacharjee

14. National Rifle Assn of India, New Delhi

Shri P.K. AcharyaVerinder Kumar Dhall

15. M/s Precihole Sports Pvt. Ltd., Thane(West)

Dr Y.P. ShirsatShri Sarfraz Naikwadi

16. CQA (A) Kirkee, Pune Shri A.V. ShindeShri B. Prabhakar

17. SAF, Kanpur Ashok Kumar

Cutting Tools Sectional Committee, PGD 32

Scope: a) Standardization in the field of twist drills, reamers, countersink and counterbore, drills, screwing taps, dies and other threading tools, milling cutters and milling machine arbors and accessories, saw and saw blades, gear cutting tools, broaches and their holding devices, single point tools, carbide tips, indexable (throwaway) inserts, tool shanks, tool blanks and hard metal burrs.

S.N. Organization Representing Members1. Addison & Co. Limited,

KanchipuramShri S. Gnanasekaran, Chairman

Shri N. SreedevanShri Mohamed Ziavudeen

4. Bharat Dynamics Ltd. Shri K.V. Subba Reddy5. Bosch Limited Shri Murthy

Shri Kumaraswamy S.7. Central Institute of Tool Design Shri Shujayat Khan

Shri H. Venkatesh9. Central Mfg Technology Institute Shri V G Yoganath

S. Narashimmalu11. Controllerate of Quality Assurance

(GS), KanpurShri MH RaoShri RK Mehotra

13. Directorate General of Supplies & Disposals

ADGShri K.R. Mayya

15. Directorate General of Quality, Assurance (Stores)

Sh Mahendra SinghShri S.S. Solanki

17. Dte. of Standardization Lt Col Praveen DeoShri Vijay Shankar

19. HMT Machine Tools Limited Shri N. Somasundaram

Shri S P Das21. In Personal Capacity Shri C Venkatesh22. ITI Limited Shri Jagannatha

Shri Ravi Kumar24. Jainex Aamcol Ltd Shri M.Z. Kothari

Shri N J Gawande

26. Kennametal India limited Shri HariharanShri Shivaprakash

28. Komet Precision Tools India (P) Ltd Shri AtulNagpalShri N.Venkatesan

29. Miranda Tools Shri K. Chandra SekharShri G. Madhusudhan

31. Mitsubishi Heavy Industries India Precision Tools Ltd

Shri R. SankarShri M.A. Dhanashekharan

33. Tata Motors Llimited Shri P.M. DeodharShri D.S. Mahajan

35. Acharya Inst of Tech.Deptt. of Mechanical

Dr. G.N. Lokesh

Prof S. Karunakara

37. Guhring India Pvt. Ltd. Shri Puneet Kapoor

Shri S.K.L.N. Prasanna

21 Bharat Heavy Electricals Limited Shri M. RaviMs. Sulochana B. Lakra

22 CQA(EE) Col. Manjunath

Lt. Col. Gurjeet Singh

Transmission Devices Sectional Committee PGD 33

Scope: Formulation of standards on terminology for conveyor, elevator and transmission belts; pulleys and belt drives of various sizes and shapes particularly grooved pulleys and V- flat pulleys and belts. b) Formulation of standards for gears, transmission chains; shaft ends and axle heights; splines and serrations; clutches and couplings and keys & keyways.

S.N. Organization Representing Members1 Steel Authority of India Limited, Ranchi Shri Jagdish Arora, Chairman2 Central Institute of Mining and Fuel

Research Institute , DhanbadShri Santosh Kumar SinghShri John Buragohain

3 Coal India Ltd. , Kolkata Shri P.K. PaulShri. P. Majumdar

4 Contitech India Pvt. Ltd. , New Shri Subrata RayShri J.P.S. Raghav

5 Director Gen of Mine Safety Dhanbad Shri D. SinhaShri G. Nagraj Venka

6 Director Gen of Quality Assurance New Delhi

Shri C.B. Madana ManoharanShri P.R. GudapatiShri K ParthibanShri K Aravindan

7 Elecon Engg Co. Ltd.,(Gear Division), Vidyanagar

Shri Prayasvin B. PatelShri Vilas B. Kalyan

8 Fenner Conveyor Belting Pvt Ltd., Madurai.

Sh. K.Eugene Paccelli,Shri Santosh N Kosarkar

9 Forech India Ltd., SONEPAT Shri I.K. BahlShri Timir Bhattacharyya

10 Gadre Brothers Engineers & Founders, Madhav Nagar

Shri Mukund Vinayak GadreShri Ramachandra Ma Gadre

11 In personal capacity, Dhanbad Shri KKS Sinha12 International Centre for Automotive

TechnologySh S K Kalia,Shri Amit K Karwal

13 International Conveyors Ltd. Aurangabad

Sh U D Dound,Shri G B GangulyShri Pinaki Sen

14 J K Fenner(India)Limited, Madurai Shri S. MajumdarShri M. NagrajanShri D. Srinivasan

15 Min of Defence CVRDE (DRDO) Chennai/Delhi

Shri S Srinivasa RaoShri G Venkatesan

16 Multiple Fabric Co Ltd., Kolkata Shri Shabbir TopiwalaShri Hamza Topiwala

17 National Test House , Ghaziabad Shri D.N. RayShri B. Chakrarborty

18 National Thermal Power Corpn. NOIDA Shri K.V. AdivarahanShri Sharad Anand

19 Neyveli Lignite Corporation Ltd Neyveli

Shri Ramakrishnan

20 Oriental Rubber Industries Pvt. Limited Sh Chinmoy Ray

S.N. Organization Representing Members21 Phoenix Conveyor Belting Pvt.Ltd.

KolkataDr.A. GuhaShri Subrata ChakrabortyShri A K Ghosh

22 Pix Transmission Ltd. , Nagpur Shri Padmesh JainShri Manish Sharma

23 Research, Designs & Standards Organization , Lucknow

Shri S PanwarShri C K Bhatt

24 Scandia Belting Co Pvt Ltd., Calcutta Shri Arshed HussainShri Partha Sarthi BiswasShri G.B. Ganguly

25 Steel Authority of India Ltd. , New Delhi

Shri Sanjay KumarShri Sanjay Kumar Singh

26 The Institution of Engineers (India), Kolkata

Dr. R.K. Dave

27 TIDC India Ltd., Chennai Shri G. RameshShri B. Srinivas

Hand Tools Sectional Committee, PGD 34

Scope: a) Standardization in the field of pliers, nippers, wrenches, files, non-spark safety tools and other assembly tools, b) Standardization in the field of earth working, metal working tools and wood working hand tools and manually portable forest machinery.

S.N. Organization Representing Members1. Central Institute of Hand Tools Shri A.K Bathla

Chairman2. Bharat Heavy Electricals Ltd Shri J.S. Roy

Shri A. K. Bhowmick4. Central Institute of Hand Tools Shri Amit Kumar5. Controllerate of Quality Assurance D.K. Mohapatra

Shri D.K. Awasthi7. Engineering Export Promotional

CouncilShri Ashwani KumarShri Opinder Singh

9. Gardex Industries Shri Paramjit Singh10. Gujrat Matikam Kalakari & Rural

Technolgy InstituteShri Satendra Pal SinghShri K.R Dhaloria

12. Hand Tools Manufacturers Association

ShriSukhdev Raj

Shri Ashwani Kumar

14. Hand Tools Industries Association Mr. Karim BakshShri Julphikar Ali

16. Hindustan Everest Tools Limited Shri S. K. Punia

Shri Harish Chander

18. Inder Industries Shri Vijay Chatrath19. Institute for Auto Parts & Hand Tools Shri Sanjeev Katoch20. Kudale Instruments Pvt ltd Shri Arun Kudale21. Ludhiana Hand Tools Association Shri S. C. Ralhan

Shri Ashok Gupta23. Marwah Tools Shri P.S. Marwah

Shri Bhupesh S. Marwah25. Mekaster Tools Limited Shri Salil Agarwal

Shri M. Harish Banga27. Office of Development

Commissioner, MSMEShri K.L. RaoShri K.K. Funda

29. Oaykay Forgings Pvt Ltd, Shri Sharad AggarwalShri Manish Aggarwal

19. Osho Tools Pvt. Limited Shri Ashok GuptaShri Rajesh Peshion

20. Passi Agro Tech Enterprises Shri Sarbagh Singh PassiShri Bikramjit Singh

21. Taparia Tools Limited Shri L.G. AgrawalShri N.B. Borse

22. Tata Motors Limited Shri L. Muthu Kumar

Shri R. R. Kulkarni23. Victor Forgings Shri Sukhdev Raj

Shri Anil Kumar24. Falcon Garden Tools Pvt. Ltd. Shri Surinder Pal Singh

Shri Gurchintan Singh Dua

Machine Tools, Machine Tool Elements and Holding Devices Sectional Committee, PGD 35

Scope: Standardization in the field of machine tools, basic machine tool elements, jigs and fixtures, modular units, evaluation of all machine tools for the working of metal, wood and plastics.

S.N. Organization Representing Members1. Expert In personal Capacity Shri Shujayat Khan, Chairman

2. Central Institute of Tool Design Shri D. ChandrashekharShri Brahmeswariah

4. ACE Designers Limited

Shri. Benedict MachadShri T.P.Sridhar

Shri Rangaiah N.L.

7. Advanced Machine Tool Testing Facility (AMTTF)

Shri Y. BalaramaiahShri N. Madhan Kumar

9. Atlas Engineering Industries(P) LtdShri Rajesh KawatraShri Deepak KawatraShri Rajnish Agarwal

12. Bajaj Auto Limited Shri D.D. PawarShri S.D. Gupta

14. Bharat Dynamics Limited Sri K.V. Subba Reddy

15. Bharat Fritz Werner Limited Shri Ashok N. BadheShri Venkatesh R. Habib

17. Bharat Heavy Electricals Limited Shri P. SoundararajanShri D.K. ChawlaShri M. Ravi

20. Central Manufacturing Technology Institute

Dr. NagahanumaianShri S V MansurShri P Rajasekhar

23.Central Mechanical Engineering, Research Institute

Prof. Harish Hirani

Dr. R.K. Padhi

25. Department of Heavy Industry, Ministry of Heavy Industries & Public Enterprises

Shri N.L. Goswami

Shri Sushil LakraShri Sanjay Chavre

28. Directorate General of Quality Assurance, (CQAEE)

Shri N Saravanna,Shri N K Bhadwya,

30.

Directorate of Standardization, N. Delhi(represented by Hindustan Aeronautics Ltd, Aircraft Manufacturing Division,Nasik)

Shri R.K. Jawaharlal

Shri D.K. Sinha

32. Guindy Machine Tools Ltd, Chennai Shri R HarikrishnanShri R. Marimuthu

34. HMT Machine Tools LimitedShri N. SomasundaramShri BVSS PrasadShri N. Sadasiva Rao

37. Indian Machine Tools Manufacturers Association

Director General Shri AnbuShri Srinjoy DasShri D V Jayram,

40. Jainson Mechanical Works Shri Jinender JainShri Akshay Jain

41. Micromatic Grinding Technologies Ltd, Ghaziabad

Shri R K MahajanShri Mahesh Samaria

43. Premier Limited, PuneShri S.D. Joshi

Rajesh D. Sharma

45. Rites Ltd

Shri Rajesh AggarwalShri M. MuraliShri P.R. Hari KumarShri C. Ganesh Kumar

46. Unison Clamping Devices LtdShri Pandurang Kallappa Sawant

Shri Vikram Pandurang Sawant

48. R&DE(E), DRDO Shri Harshe Rajul R.Shri Bansode Arvind F.

50. Hindustan Aeronautics LtdShri R.K. JawaharlalShri D.K. Sinha

52. CQA(EE) Shri N. SaravannaShri N.K. Bhadwya

53. Expert in personal Capacity Shri Gopalkrishna Hegde

Fluid Power Systems Sectional Committee, PGD 36

Scope: a) Standardization in the field of terminology, classifications, symbols, fluid logic, and fluid properties, contamination control, components marking systems and identification codes, sealing devices and their related parameters; hydraulic components and their testing, maintenance and installations; pneumatic components and their testing, installation and maintenance. b) Standardization in the field of ports, fittings, tubes and tube, hoses & hose assemblies and their testing.

S.N.

Organization Representing Members

1. Oil and Natural Gas Corporation Ltd, New Delhi Shri S.Shakir Ali

2. ACE Designers Ltd , Bangalore Shri T.P. Sridhar

3. Bharat Earth Movers Ltd. , Kolar Gold Fields, Kolar Shri A SubramanyamShri S Basavaraju

5. Bosch Limited, Bangalore Shri Ram DespandeShri Murthy

7. Bosch Rexroth (India) Ltd , Bangalore Shri Mukesh DodiyaShri Prashant Katkar

9. Central Manufacturing Technology Institute , Bangalore Shri P.S. DeshpandeShri S.K. Mahajan

11. Denison Hydraulics India Ltd , Patancheru, Hyderabad Shri V.G. SrinivasShri S. Radhakrishna

13. Eaton Technologies, Pune Shri Shreedhar KethariShri B.A.N. Murthy

15. Office of Development Commissioner (MSME), New Delhi

Shri Kanwlinder Singh Sodhi

16. Dynamitic Technologies Ltd, Bangalore Shri P.K. Ray ChaudhuriShri Vivek Anand Sukumaran

18. Eastern pneumatic Pvt Ltd, Kolkata Shri Satyajit ChangduriShri Jayantaa Roy

20. Eimco Elecon (India) Ltd, Gujarat Shri Ravindra LuthraShri Bhavin K. Bhatt

22. EPE Process Filters & Accumulators Pvt Ltd., Hyderabad Shri Narendra GauriShri P N Bhagawati

24. Festo Controls Pvt Ltd, Bengaluru Shri R JoshiShri P Shah

26. Fluid Power Society of India (FPSI), Bengaluru Dr. M.SingaperumalShri M.Yoganarsimha

28. Hindustan Aeronautics Ltd. Bangalore Shri K.N.B. PanickerShri S. Viswanath

30. HMT Ltd. , Bangalore Shri V. NarayananShri N.S. Verma

32. Hyd-Air Engineering Pvt. Ltd. , Mumbai Shri N.S. KarachiwalaShri V. Rane

34. Hyfit Engineers, Faridabad Shri H.L. BhutaniShri Dheeraj Bhutani

36. Hyloc Hydrotechnic Private Limited, Belgaum Shri D.S. ChitnisShri G.R. Deshpande

38. Janatics India Pvt Ltd, Bengaluru Shri G.C. Nageswaran

39. Kwality Precision Products (P) Limited , Chennai Shri R. ThiagarajanShri S.M. Kannan

41. Larsen & Toubro Komatsu Bangalore Shri T.R.R. RaoShri Sanjeev WalvekarShri D. Morada

43. M.N. Dastur & Co Ltd, Kolkata Shri Pranesh Koner

44. MECON Ltd. , Ranchi Shri Neeraj KumarShri Ranjeet Kumar

46. Naval Headquarters , New Delhi Cdr. Hanish SharmaCdr. Rajib Sanyal

48. Nucon Industries Pvt. Ltd. Hyderabad Shri Ch. P. PrasadShri P. Ramesh

50. ONGC, Dehradun Shri A.K.AgrawalShri A.K. Kathuria

52. Research & Development Estt., Pune Dr. Shankar BhaumikShri. Nishant Chaudhary

54. RDSO, Lucknow Shri Vijay Kumar Goel

55. Rotex Automation Ltd,Vadodara

Shri Jitendra Girdharlal ShahShri Rajesh Shah

57. Duncan Engineering Limited, Pune Shri Shrikant Rao

58. IPSS (SAIL), New Delhi Shri Anujit RiturajShri Sanjay K SinghShri Gulshan Kumar

59. Tata Motors Ltd, Pune Shri R.R. Kulkarni

60. Wipro Infrastructure Engineering Ltd Bangalore Shri ShivkumarShri C.J. RajagopalShri Biradar

62. Yuken India Ltd , New Delhi Shri Kamal SarinShri Rakesh KumarShri Guruprasad Singh

General Engineering and Fasteners Standards Sectional Committee, PGD 37

Scope: Formulation of standards on (i) Basic mechanical engineering subjects for general applicability such as fasteners of all types (bolts, nuts, rivets, pins, nails, washers etc.), knurls, relief grooves, countersunks and counterbores, and (ii) Screw threads including basic profiles, pitch-diameter combination, terminology, technical requirement and tolerances but excluding screw thread gauges.

S.N. Organization Representing Members

1. Personal Capacity Shri N. Srinivasa MurthyChairman

2. Bosch Ltd., Bangalore Shri Kumaraswamy S.Shri Murthy

3. Addison & Co. Ltd., Chennai Shri C. VenkateshShri N. Sreedevan

4. Bharat Dynamics Ltd., Hyderabad Shri K.V.Subba ReddyShri K.Vishwershwar Rao

5. Bharat Earth Movers Ltd. , Bangalore Shri S.K.SahaShri T N Srinivas

6. Bharat Heavy Electricals Ltd. (BHEL) , Hyderabad

Shri B. Narayana NaikShri Subash Chandra

7. Central Manufacturing Technology Institute, Bangalore

Shri P.S. DeshpandeShri S.K. Verma

8. CQA (GS) ,DGQA, Ministry of Defence, Kanpur

Shri Bijendra KumarShri Sai Sawroop Solanki

9. Department of Science & Technology, New Delhi

Shri Rajiv K Tayal

10. Directorate General of Supply and Disposal, New Delhi

Probir Kumar LahiriShri R. Karuppiah

11. HMT Ltd., Bangalore C.S. Vijaya PrakashSomasundaram

12. India Meteorology Department (IMD), Pune

Shri S. Krishnaiah,Shri P.N. Mohanan

13. National Physical Laboratory, New Delhi Shri Anil KumarShri Gautam Mandal

14. National Test House, Kolkata Shri S.P. RoyShri Anil Chopra

15. Research Design & Standards Organization (RDSO), Lucknow

Shri R.N. Tripathi

16. Size Control Gauges & Tools Pvt. Ltd., Pune

Shri A.S. DurveShri Atul Ashok Durve

17. Sundram Fasteners Ltd. , Chennai Shri Atul Kumar Agrawal18. Tata Motors Ltd., Pune Shri L. Muthukumar

Shri R.R. Kulkarni19. Unison Clamping Devices, Pune Shri P.K. Sawant

Shri Vikram P. Sawant20 National Aerospace Laboratories,

BangaloreShri S. RavishankarShri M.S. Kamleshaiah

21 Precise Fasteners PVT Ltd, Mumbai Shri Parag Prakash Shah

22 ASP Private Limited, Hawrah, West Bengal

Vinod SharmaB. Bhaumik

Metal Containers Sectional Committee, PGD 38

Scope: Standardization in the field of metal containers

S.N. Organization Representing Members1. Indian Institute of Packaging,

MumbaiDr N.C. Saha, Chairman

2. Ace Cans Manufacturing Co. Shri Kanak Raj ParmarShri Dinesh Parmar

3. Asian Paints Limited Shri Navninder Singh

4. Balmer Lawrie & Co. Ltd, Mumbai Shri S.C. TiwariShri R.S. Patel

5. Balmer Lawrie-Van Leer Ltd., Mumbai

Shri Tushar S. ShirwalkarShri Sunil Gupta

6. Central Insecticide Laboratory Faridabad

Dr. A.K. Sinha

7. Hindustan Petroleum Corp. Ltd, Mumbai

Shri H. PadmanabhanShri Kapil Tekchandni

8. Hindustan Tin Works Ltd, New Delhi

Shri Gajendra SinghShri Rajeev Kumar

9. Indian Institute of Packaging(IIP), Delhi

Dr. Tanveer AlamShri S.Juikar

10. Indian Oil Corp. Ltd, Mumbai Shri Ramesh MenonShri K. Prasad

11. Kaira Can Company Ltd., Mumbai Shri D.N. PrabhuShri K.M. Shenoy

12. Shetron Ltd., Mumbai Shri Praveen V. MallyShri Karthik Nayak

13. Caps and Containers Industries, Mumbai

Mr. O.P. AgarwalMs. Manisha Agarwal

14. Ministry of Agriculture, Faridabad Shri R.V.SinghShri R.K.Sharma

15. Ministry of Consumer Affairs, Food & Public Distribution, New Delhi

Shri B.N. Dixit

16. Ministry of Defence (DGQA) Smt. Manju DixitSri Satya Narain

17. Nestle House, Gurgaon Shri Asif KazmiShri Biswajit Basu

18. Recon Machine Tools Pvt. Ltd., Mumbai

Shri P.A. PaiShri Ashwin Pai

19. The Tinplate Co. of India Ltd, Jamshedpur

Shri Abesh ChatterjeeShri S.J. Dey