Bioprinting References Prof. Steven S. Saliterman

Adomaviciute, E., S. Pupkeviciute, V. Juskaite, M. Zilius, S. Stanys, A. Pavilonis, and V. Briedis. "Formation and Investigation of Electrospun Pla Materials with Propolis Extracts and Silver Nanoparticles for Biomedical Applications." Journal of Nanomaterials (2017).

Afshar, M., A. P. Anaraki, H. Montazerian, and J. Kadkhodapour. "Additive Manufacturing and Mechanical Characterization of Graded Porosity Scaffolds Designed Based on Triply Periodic Minimal Surface Architectures." [In English]. Journal of the Mechanical Behavior of Biomedical Materials 62 (Sep 2016): 481-94.

Agarwal, S., A. Greiner, and J. H. Wendorff. "Functional Materials by Electrospinning of Polymers." Progress in Polymer Science 38, no. 6 (Jun 2013): 963-91.

Ajeti, Visar, Chi-Hsiang Lien, Shean-Jen Chen, Ping-Jung Su, Jayne M. Squirrell, Katharine H. Molinarolo, Gary E. Lyons, et al. "Image-Inspired 3d Multiphoton Excited Fabrication of Extracellular Matrix Structures by Modulated Raster Scanning." Optics express 21, no. 21 (2013): 25346.

Albritton, J. L., and J. S. Miller. "3d Bioprinting: Improving in Vitro Models of Metastasis with Heterogeneous Tumor Microenvironments." Disease Models & Mechanisms 10, no. 1 (Jan 2017): 3-14.

Ameri, K., R. Samurkashian, and Y. Yeghiazarians. "Three-Dimensional Bioprinting Emerging Technology in Cardiovascular Medicine." Circulation 135, no. 14 (Apr 2017): 1281-83.

Anderson, C. W., N. Boardman, J. S. Luo, J. Park, and Y. B. Qyang. "Stem Cells in Cardiovascular Medicine: The Road to Regenerative Therapies." Current Cardiology Reports 19, no. 4 (Apr 2017).

Appel, A. A., M. A. Anastasio, J. C. Larson, and E. M. Brey. "Imaging Challenges in Biomaterials and Tissue Engineering." Biomaterials 34, no. 28 (Sep 2013): 6615-30.

Armstrong, J. P. K., M. Burke, B. M. Carter, S. A. Davis, and A. W. Perriman. "3d Bioprinting Using a Templated Porous Bioink." Advanced Healthcare Materials 5, no. 14 (Jul 2016): 1724-30.

Arrigoni, C., M. Gilardi, S. Bersini, C. Candrian, and M. Moretti. "Bioprinting and Organ-on-Chip Applications Towards Personalized Medicine for Bone Diseases." Stem Cell Reviews and Reports 13, no. 3 (Jun 2017): 407-17.

Arslan-Yildiz, A., R. El Assal, P. Chen, S. Guven, F. Inci, and U. Demirci. "Towards Artificial Tissue

Models: Past, Present, and Future of 3d Bioprinting." Biofabrication 8, no. 1 (Mar 2016).

Atala, A., and J. Yoo. "Bioprinting: 3d Printing Comes to Life." Manufacturing Engineering (2015): 63-66.

Au-Yeung, G. C. T., U. Sarig, H. Sarig, H. Bogireddi, T. Bronshtein, L. Baruch, A. Spizzichino, et al. "Restoring the Biophysical Properties of Decellularized Patches through Recellularization." Biomaterials Science 5, no. 6 (Jun 2017): 1183-94.

Avolio, E., V. V. Alvino, M. T. Ghorbel, and P. Campagnolo. "Perivascular Cells and Tissue Engineering: Current Applications and Untapped Potential." Pharmacology & Therapeutics 171 (Mar 2017): 83-92.

Awgulewitsch, C., A. N. Mehesz, Z. Hajdu, and R. Visconti. "Evaluation of Scaffold-Free Cell Aggregates for Vascular Construct Bioprinting." Molecular Biology of the Cell 24 (2013).

Axpe, E., and M. L. Oyen. "Applications of Alginate-Based Bioinks in 3d Bioprinting." International Journal of Molecular Sciences 17, no. 12 (Dec 2016).

Ballyns, J. J., and L. J. Bonassar. "Dynamic Compressive Loading of Image-Guided Tissue Engineered Meniscal Constructs." [In English]. Journal of Biomechanics 44, no. 3 (Feb 2011): 509-16.

———. "Image-Guided Tissue Engineering." [In English]. Journal of Cellular and Molecular Medicine 13, no. 8A (Aug 2009): 1428-36.

Ballyns, J. J., J. P. Gleghorn, V. Niebrzydowski, J. J. Rawlinson, H. G. Potter, S. A. Maher, T. M. Wright, and L. J. Bonassar. "Image-Guided Tissue Engineering of Anatomically Shaped Implants Via Mri and Micro-Ct Using Injection Molding." [In English]. Tissue Engineering Part A 14, no. 7 (Jul 2008): 1195-202.

Ban, K., S. Bae, and Y. S. Yoon. "Current Strategies and Challenges for Purification of Cardiomyocytes Derived from Human Pluripotent Stem Cells." Theranostics 7, no. 7 (2017): 2067-77.

Bauer, H. K., M. Heller, M. Fink, D. Maresch, J. Gartner, U. M. Gassner, and B. Al-Nawas. "Social and Legal Frame Conditions for 3d (and) Bioprinting in Medicine." [In English]. International Journal of Computerized Dentistry 19, no. 4 (2016): 293-99.

Bauermeister, A. J., A. Zuriarrain, and M. I. Newman. "Three-Dimensional Printing in Plastic and Reconstructive Surgery a Systematic Review." Annals of Plastic Surgery 77, no. 5 (Nov 2016): 569-76.

Bhuthalingam, R., P. Q. Lim, S. A. Irvine, and S. S. Venkatraman. "Automated Robotic Dispensing Technique for Surface Guidance and Bioprinting of Cells." Jove-Journal of Visualized Experiments, no. 117 (Nov 2016).

Blaeser, A., D. F. D. Campos, U. Puster, W. Richtering, M. M. Stevens, and H. Fischer. "Controlling Shear Stress in 3d Bioprinting Is a Key Factor to Balance Printing Resolution and Stem Cell Integrity." Advanced Healthcare Materials 5, no. 3 (Feb 2016): 326-33.

Blatchley, M. R., and S. Gerecht. "Acellular Implantable and Injectable Hydrogels for Vascular Regeneration." Biomedical Materials 10, no. 3 (Jun 2015).

Bonda, D. J., S. Manjila, W. R. Selman, and D. Dean. "The Recent Revolution in the Design and Manufacture of Cranial Implants: Modern Advancements and Future Directions." Neurosurgery 77, no. 5 (Nov 2015): 814-24.

Borovjagin, V. Anton, M. Brenda Ogle, L. Joel Berry, and L. Jianyi Zhang. "From Microscale Devices to 3d Printing: Advances in Fabrication of 3d Cardiovascular Tissues." Circulation Research 120, no. 1 (2017): 150-65.

Breckwoldt, K., D. Letuffe-Breniere, I. Mannhardt, T. Schulze, B. Ulmer, T. Werner, A. Benzin, et al. "Differentiation of Cardiomyocytes and Generation of Human Engineered Heart Tissue." Nature Protocols 12, no. 6 (Jun 2017): 1177-97.

Brian, T. Freeman, and M. Ogle Brenda. "Viral-Mediated Fusion of Mesenchymal Stem Cells with Cells of the Infarcted Heart Hinders Healing Via Decreased Vascularization and Immune Modulation." Scientific Reports 6 (2016).

Campos, D. F. D., W. Drescher, B. Rath, M. Tingart, and H. Fischer. "Supporting Biomaterials for Articular Cartilage Repair." Cartilage 3, no. 3 (Jul 2012): 205-21.

Carlier, A., G. A. Skvortsov, F. Hafezi, E. Ferraris, J. Patterson, B. Koc, and H. Van Oosterwyck. "Computational Model-Informed Design and Bioprinting of Cell-Patterned Constructs for Bone Tissue Engineering." [In English]. Biofabrication 8, no. 2 (Jun 2016): 17.

Chang, C. C., E. D. Boland, S. K. Williams, and J. B. Hoying. "Direct-Write Bioprinting Three-Dimensional Biohybrid Systems for Future Regenerative Therapies." Journal of Biomedical Materials Research Part B-Applied Biomaterials 98B, no. 1 (Jul 2011): 160-70.

Chang, C. H., M. H. Hsu, C. J. Weng, W. I. Hung, T. L. Chuang, K. C. Chang, C. W. Peng, Y. C. Yen, and J. M. Yeh. "3d-Bioprinting Approach to Fabricate Superhydrophobic Epoxy/Organophilic Clay as an Advanced Anticorrosive Coating with the Synergistic Effect of Superhydrophobicity and Gas Barrier Properties." Journal of Materials Chemistry A 1, no. 44 (2013): 13869-77.

Chao, W., and A. Kolski-Andreaco. "2012: A Year in Review." Jove-Journal of Visualized Experiments, no. 71 (Jan 2013).

Cheung, D. Y., B. Duan, and J. T. Butcher. "Current Progress in Tissue Engineering of Heart Valves: Multiscale Problems, Multiscale Solutions." Expert Opinion on Biological Therapy 15, no. 8 (Aug 2015): 1155-72.

Chia, H. N., and B. M. Wu. "Recent Advances in 3d Printing of Biomaterials." Journal of Biological Engineering 9 (Mar 2015).

Christensen, K., C. X. Xu, W. X. Chai, Z. Y. Zhang, J. Z. Fu, and Y. Huang. "Freeform Inkjet Printing of Cellular Structures with Bifurcations." Biotechnology and Bioengineering 112, no. 5 (May 2015): 1047-55.

Chua, C. K., W. Y. Yeong, and J. An. "3d Printing and Bioprinting in Mems Technology." Micromachines 8, no. 7 (Jul 2017).

Crisan, M., M. Corselli, W. C. W. Chen, and B. Peault. "Perivascular Cells for Regenerative Medicine." Journal of Cellular and Molecular Medicine 16, no. 12 (Dec 2012): 2851-60.

Cubo, N., M. Garcia, J. F. del Canizo, D. Velasco, and J. L. Jorcano. "3d Bioprinting of Functional Human Skin: Production and in Vivo Analysis." Biofabrication 9, no. 1 (Mar 2017).

Cui, H. T., M. Nowicki, J. P. Fisher, and L. G. Zhang. "3d Bioprinting for Organ Regeneration." Advanced Healthcare Materials 6, no. 1 (Jan 2017).

Dababneh, A. B., and I. T. Ozbolat. "Bioprinting Technology: A Current State-of-the-Art Review." Journal of Manufacturing Science and Engineering-Transactions of the Asme 136, no. 6 (Dec 2014).

Daly, A. C., S. E. Critchley, E. M. Rencsok, and D. J. Kelly. "A Comparison of Different Bioinks for 3d Bioprinting of Fibrocartilage and Hyaline Cartilage." Biofabrication 8, no. 4 (Dec 2016).

Datta, P., B. Ayan, and I. T. Ozbolat. "Bioprinting for Vascular and Vascularized Tissue Biofabrication." Acta Biomaterialia 51 (Mar 2017): 1-20.

Davenport, M. "The Telltale Heart-on-a-Chip Device." Chemical & Engineering News 94, no. 43 (Oct 2016): 5-5.

De Maria, C., G. Vozzi, and L. Moroni. "Multimaterial, Heterogeneous, and Multicellular Three-Dimensional Bioprinting." Mrs Bulletin 42, no. 8 (Aug 2017): 578-84.

Derby, B. "Printing and Prototyping of Tissues and Scaffolds." Science 338, no. 6109 (Nov 2012): 921-26.

Deshpande, M. A., R. R. Holden, and I. Gilron. "The Impact of Therapy on Quality of Life and Mood in Neuropathic Pain: What Is the Effect of Pain Reduction?". Anesthesia & Analgesia 102, no. 5 (2006): 1473-9.

Devillard, R., E. Pages, M. M. Correa, V. Keriquel, M. Remy, J. Kalisky, M. Ali, B. Guillotin, and F. Guillemot. "Cell Patterning by Laser-Assisted Bioprinting." In Micropatterning in Cell Biology, Pt A, edited by M. Piel and M. Thery. Methods in Cell Biology, 159-74, 2014.

Di Prima, Matthew at al. "Additively Manufactured Medical Products - the Fda Perspective." 3D Printing in Medicine 2:1 (2016).

Domian, I. J., H. Yu, and N. Mittal. "On Materials for Cardiac Tissue Engineering." Advanced Healthcare Materials 6, no. 2 (Jan 2017).

Donderwinkel, I., J. C. M. van Hest, and N. R. Cameron. "Bio-Inks for 3d Bioprinting: Recent Advances and Future Prospects." Polymer Chemistry 8, no. 31 (Aug 2017): 4451-71.

Duan, B. "State-of-the-Art Review of 3d Bioprinting for Cardiovascular Tissue Engineering." Annals of Biomedical Engineering 45, no. 1 (Jan 2017): 195-209.

Duchi, S., C. Onofrillo, C. D. O'Connell, R. Blanchard, C. Augustine, A. F. Quigley, R. M. I. Kapsa, et al. "Handheld Co-Axial Bioprinting: Application to in Situ Surgical Cartilage Repair." Scientific Reports 7 (Jul 2017).

Duelen, R., and M. Sampaolesi. "Stem Cell Technology in Cardiac Regeneration: A Pluripotent Stem Cell Promise." Ebiomedicine 16 (Feb 2017): 30-40.

Dumas, M., P. Terriault, and V. Brailovski. "Modelling and Characterization of a Porosity Graded Lattice Structure for Additively Manufactured Biomaterials." [In English]. Materials & Design 121 (May 2017): 383-92.

Elcin, Y. M. "Special Issue: Organs-on-Chips & 3d-Bioprinting Technologies for Personalized Medicine." Stem Cell Reviews and Reports 13, no. 3 (Jun 2017): 319-20.

Ersumo, N. T., K. L. Spitler, and Ieee. "Effects of Hydrogel Properties and Extrusion Parameters on 3d Bioprinting." In 2015 41st Annual Northeast Biomedical Engineering Conference. Annual Ieee Northeast Bioengineering Conference, 2015.

Esmond, R. W., and G. C. Phero. "The Additive Manufacturing Revolution and the Corresponding Legal Landscape This Paper Discusses the Ways to Protect Innovations in Additive Manufacturing in This Fast Changing World." [In English]. Virtual and Physical Prototyping 10, no. 1 (2015): 9-12.

Fahmy, M. D., H. E. Jazayeri, M. Razavi, R. Masri, and L. Tayebi. "Three-Dimensional Bioprinting Materials with Potential Application in Preprosthetic Surgery." Journal of Prosthodontics-Implant Esthetic and Reconstructive Dentistry 25, no. 4 (Jun 2016): 310-18.

Fattah, A. R. A., E. Meleca, S. Mishriki, A. Lelic, F. Geng, R. P. Sahu, S. Ghosh, and I. K. Puri. "In Situ 3d Label-Free Contactless Bioprinting of Cells through Diamagnetophoresis." Acs Biomaterials Science & Engineering 2, no. 12 (Dec 2016): 2133-38.

Feinberg, A. W., and J. S. Miller. "Progress in Three-Dimensional Bioprinting." Mrs Bulletin 42, no. 8 (Aug 2017): 557-62.

Ferreira, J. N., S. Rungarunlert, G. Urkasemsin, C. Adine, and G. R. Souza. "Three-Dimensional Bioprinting Nanotechnologies Towards Clinical Application of Stem Cells and Their Secretome in Salivary Gland Regeneration." Stem Cells International (2016).

Ferris, C. J., K. J. Gilmore, S. Beirne, D. McCallum, G. G. Wallace, and M. I. H. Panhuis. "Bio-Ink for on-Demand Printing of Living Cells." Biomaterials Science 1, no. 2 (2013): 224-30.

Fisher, E., J. Rinnofner, M. Koller, J. Tsui, A. Smith, T. Neumann, and D. Kim. "A Microphysiological Heart-on-a-Chip Using Electroconductive Myocardial Matrices." Tissue Engineering Part A 21 (Sep 2015): S41-S41.

Fishman, J. M., K. Wiles, M. W. Lowdell, P. De Coppi, M. J. Elliott, A. Atala, and M. A. Birchall. "Airway Tissue Engineering: An Update." Expert Opinion on Biological Therapy 14, no. 10 (Oct 2014): 1477-91.

Fleischer, S., R. Feiner, and T. Dvir. "Cardiac Tissue Engineering: From Matrix Design to the Engineering of Bionic Hearts." Regenerative Medicine 12, no. 3 (Apr 2017): 275-84.

Francisco, L. A. V., and L. C. Trevelin. "Model for Describing Bioprinting Projects in Stl." In Information Technology: New Generations, edited by S. Latifi. Advances in Intelligent Systems and Computing, 1291-94, 2016.

Freeman, Brian T., Nicholas A. Kouris, and Brenda M. Ogle. "Tracking Fusion of Human Mesenchymal Stem Cells after Transplantation to the Heart." STEM CELLS Translational Medicine 4, no. 6 (2015): 685-94.

Frese, J., A. Morgenroth, M. E. Mertens, S. Koch, L. Rongen, A. T. J. Vogg, B. D. Zlatopolskiy, et al. "Nondestructive Monitoring of Tissue-Engineered Constructs." Biomedical Engineering-Biomedizinische Technik 59, no. 2 (Apr 2014): 165-75.

Fricain, J. C., H. De Olivera, R. Devillard, J. Kalisky, M. Remy, V. Keriquel, D. Le Nihounen, et al. "3d Bioprinting in Regenerative Medicine and Tissue Engineering." M S-Medecine Sciences 33, no. 1 (Jan 2017): 52-59.

Gaetani, R., P. A. Doevendans, C. H. G. Metz, J. Alblas, E. Messina, A. Giacomello, and J. P. G. Sluijtera. "Cardiac Tissue Engineering Using Tissue Printing Technology and Human Cardiac Progenitor Cells." Biomaterials 33, no. 6 (Feb 2012): 1782-90.

Gao, B., Q. Z. Yang, X. Zhao, G. R. Jin, Y. F. Ma, and F. Xu. "4d Bioprinting for Biomedical Applications." Trends in Biotechnology 34, no. 9 (Sep 2016): 746-56.

Gao, E. Ling, P. Molly Kupfer, T. Jangwook Jung, G. Libang Yang, J. Patrick Zhang, M. Yong Da Sie, M. Quyen Tran, et al. "Myocardial Tissue Engineering with Cells Derived from Human-Induced Pluripotent Stem Cells and a Native-Like, High-Resolution, 3-Dimensionally Printed Scaffold." Circulation Research 120, no. 8 (2017): 1318-25.

Gao, G. F., and X. F. Cui. "Three-Dimensional Bioprinting in Tissue Engineering and Regenerative Medicine." Biotechnology Letters 38, no. 2 (Feb 2016): 203-11.

Gao, L., M. E. Kupfer, J. P. Jung, L. B. Yang, P. Zhang, Y. D. Sie, Q. Tran, et al. "Myocardial Tissue Engineering with Cells Derived from Human-Induced Pluripotent Stem Cells and a Native-Like, High-Resolution, 3-Dimensionally Printed Scaffold." Circulation Research 120, no. 8 (Apr 2017): 1318-+.

Gao, Q., Z. J. Liu, Z. W. Lin, J. J. Qiu, Y. Liu, A. Liu, Y. D. Wang, et al. "3d Bioprinting of Vessel-Like Structures with Multilevel Fluidic Channels." Acs Biomaterials Science & Engineering 3, no. 3 (Mar 2017): 399-408.

Ghiaseddin, A., H. Pouri, M. Soleimani, E. Vasheghani-Farahani, H. A. Tafti, and S. Hashemi-Najafabadi. "Cell Laden Hydrogel Construct on-a-Chip for Mimicry of Cardiac Tissue in-Vitro Study." Biochemical and Biophysical Research Communications 484, no. 2 (Mar 2017): 225-30.

Giannitelli, S. M., D. Accoto, M. Trombetta, and A. Rainer. "Current Trends in the Design of Scaffolds for Computer-Aided Tissue Engineering." [In English]. Acta Biomaterialia 10, no. 2 (Feb 2014): 580-94.

Giannopoulos, A. A., D. Mitsouras, S. J. Yoo, P. P. Liu, Y. Chatzizisis, and F. J. Rybicki. "Applications of 3d Printing in Cardiovascular Diseases." Nature Reviews Cardiology 13, no. 12 (Dec 2016): 701-18.

Goldstein, T. A., C. J. Epstein, J. Schwartz, A. Krush, D. J. Lagalante, K. P. Mercadante, D. Zeltsman, L. P. Smith, and D. A. Grande. "Feasibility of Bioprinting with a Modified Desktop 3d Printer." Tissue Engineering Part C-Methods 22, no. 12 (Dec 2016): 1071-76.

Gomes, M. E., M. T. Rodrigues, R. M. A. Domingues, and R. L. Reis. "Tissue Engineering and Regenerative Medicine: New Trends and Directions-a Year in Review." Tissue Engineering Part B-Reviews 23, no. 3 (Jun 2017): 211-24.

Graham, A. D., S. N. Olof, M. J. Burke, J. P. K. Armstrong, E. A. Mikhailova, J. G. Nicholson, S. J. Box, et al. "High-Resolution Patterned Cellular Constructs by Droplet-Based 3d Printing." Scientific Reports 7 (Aug 2017).

Grune, M., M. Pflaum, C. Hess, S. Diamantouros, S. Schlie, A. Deiwick, L. Koch, et al. "Laser-Assisted Bioprinting for the Generation of Vascular-Like Structures." International Journal of Artificial Organs 34, no. 8 (Aug 2011): 707-07.

Gu, Q., H. Zhu, J. Li, X. Li, J. Hao, G. G. Wallace, and Q. Zhou. "Three-Dimensional Bioprinting Speeds up Smart Regenerative Medicine." National Science Review 3, no. 3 (Sep 2016): 331-44.

Guan, X. F., M. Avci-Adali, E. Alarcin, H. Cheng, S. S. Kashaf, Y. X. Li, A. Chawla, H. L. Jang, and A.

Khademhosseini. "Development of Hydrogels for Regenerative Engineering." Biotechnology Journal 12, no. 5 (May 2017).

Gudapati, H., M. Dey, and I. Ozbolat. "A Comprehensive Review on Droplet-Based Bioprinting: Past, Present and Future." Biomaterials 102 (Sep 2016): 20-42.

Guillotin, B., S. Catros, V. Keriquel, A. Souquet, A. Fontaine, M. Remy, J. C. Fricain, and F. Guillemot. "Rapid Prototyping of Complex Tissues with Laser Assisted Bioprinting (Lab)." Rapid Prototyping of Biomaterials: Principles and Applications 70 (2014): 156-75.

Harbaugh, J. T. "Do You Own Your 3d Printed Body?". American Journal of Law & Medicine 41 (2015): 22.

Hassiba, A. J., M. E. El Zowalaty, G. K. Nasrallah, T. J. Webster, A. S. Luyt, A. M. Abdullah, and A. A. Elzatahry. "Review of Recent Research on Biomedical Applications of Electrospun Polymer Nanofibers for Improved Wound Healing." Nanomedicine 11, no. 6 (2016): 715-37.

He, Y., F. F. Yang, H. M. Zhao, Q. Gao, B. Xia, and J. Z. Fu. "Research on the Printability of Hydrogels in 3d Bioprinting." Scientific Reports 6 (Jul 2016).

Herman, William A. and Gilbert B. Devey. "Future Trends in Medical Devcie Technologies." FDA (2007): 50.

Hernandez-Cordova, R., D. A. Mathew, R. Balint, H. J. Carrillo-Escalante, J. M. Cervantes-Uc, L. A. Hidalgo-Bastida, and F. Hernandez-Sanchez. "Indirect Three-Dimensional Printing: A Method for Fabricating Polyurethane-Urea Based Cardiac Scaffolds." Journal of Biomedical Materials Research Part A 104, no. 8 (Aug 2016): 1912-21.

Hesuani, Y. D., Fdas Pereira, V. Parfenov, E. Koudan, A. Mitryashkin, N. Replyanski, V. Kasyanov, et al. "Design and Implementation of Novel Multifunctional 3d Bioprinter." 3d Printing and Additive Manufacturing 3, no. 1 (Mar 2016): 65-68.

Ho, C. M. B., A. Mishra, P. T. P. Lin, S. H. Ng, W. Y. Yeong, Y. J. Kim, and Y. J. Yoon. "3d Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering." Macromolecular Bioscience 17, no. 4 (Apr 2017).

Hoch, E., G. E. M. Tovar, and K. Borchers. "Bioprinting of Artificial Blood Vessels: Current Approaches Towards a Demanding Goal." European Journal of Cardio-Thoracic Surgery 46, no. 5 (Nov 2014): 767-78.

Holzl, K., S. M. Lin, L. Tytgat, S. Van Vlierberghe, L. X. Gu, and A. Ovsianikov. "Bioink Properties before, During and after 3d Bioprinting." Biofabrication 8, no. 3 (Sep 2016).

Hospodiuk, M., M. Dey, D. Sosnoski, and I. T. Ozbolat. "The Bioink: A Comprehensive Review on Bioprintable Materials." Biotechnology Advances 35, no. 2 (Mar-Apr 2017): 217-39.

Hourd, P., N. Medcalf, J. Segal, and D. J. Williams. "A 3d Bioprinting Exemplar of the Consequences of the Regulatory Requirements on Customized Processes." [In English]. Regenerative Medicine 10, no. 7 (2015): 863-83.

Hribar, K. C., P. Soman, J. Warner, P. Chung, and S. C. Chen. "Light-Assisted Direct-Write of 3d Functional Biomaterials." Lab on a Chip 14, no. 2 (2014): 268-75.

Hsu, S. H., K. C. Hung, and C. W. Chen. "Biodegradable Polymer Scaffolds." Journal of Materials Chemistry B 4, no. 47 (Dec 2016): 7493-505.

Huang, Y., X. F. Zhang, G. F. Gao, T. Yonezawa, and X. F. Cui. "3d Bioprinting and the Current Applications in Tissue Engineering." Biotechnology Journal 12, no. 8 (Aug 2017).

Huang, Y. Y. S., D. Zhang, and Y. Liu. "Bioprinting of Three-Dimensional Culture Models and Organ-on-a-Chip Systems." Mrs Bulletin 42, no. 8 (Aug 2017): 593-98.

Irvine, S. A., and S. S. Venkatraman. "Bioprinting and Differentiation of Stem Cells." Molecules 21, no. 9 (Sep 2016).

Jakab, K., C. Norotte, F. Marga, K. Murphy, G. Vunjak-Novakovic, and G. Forgacs. "Tissue Engineering by Self-Assembly and Bio-Printing of Living Cells." Biofabrication 2, no. 2 (Jun 2010).

Jalaja, K., D. Naskar, S. C. Kundu, and N. R. James. "Potential of Electrospun Core-Shell Structured Gelatin-Chitosan Nanofibers for Biomedical Applications." Carbohydrate Polymers 136 (Jan 2016): 1098-107.

Jana, S., and A. Lerman. "Bioprinting a Cardiac Valve." Biotechnology Advances 33, no. 8 (Dec 2015): 1503-21.

Jang, C. H., S. H. Ahn, G. H. Yang, and G. H. Kim. "A Mscs-Laden Polycaprolactone/Collagen Scaffold for Bone Tissue Regeneration." Rsc Advances 6, no. 8 (2016): 6259-65.

Jang, J., H. J. Park, S. W. Kim, H. Kim, J. Y. Park, S. J. Na, H. J. Kim, et al. "3d Printed Complex Tissue Construct Using Stem Cell-Laden Decellularized Extracellular Matrix Bioinks for Cardiac Repair." Biomaterials 112 (Jan 2017): 264-74.

Jang, J., H. J. Park, S. W. Kim, H. Kim, J. Y. Park, S. J. Na, H. J. Kim, et al. "3d Printed Complex Tissue Construct Using Stem Cell-Laden Decellularized Extracellular Matrix Bioinks for Cardiac Repair." Biomaterials 112 (Jan 2017): 264-74.

Jastrzebska, E., E. Tomecka, and I. Jesion. "Heart-on-a-Chip Based on Stem Cell Biology." Biosensors & Bioelectronics 75 (Jan 2016): 67-81.

Ji, S. T., H. Kim, J. Yun, J. S. Chung, and S. M. Kwon. "Promising Therapeutic Strategies for Mesenchymal Stem Cell-Based Cardiovascular Regeneration: From Cell Priming to Tissue

Engineering." Stem Cells International (2017).

Jia, J., D. J. Richards, S. Pollard, Y. Tan, J. Rodriguez, R. P. Visconti, T. C. Trusk, et al. "Engineering Alginate as Bioink for Bioprinting." Acta Biomaterialia 10, no. 10 (Oct 2014): 4323-31.

Jia, W. T., P. S. Gungor-Ozkerim, Y. S. Zhang, K. Yue, K. Zhu, W. J. Liu, Q. Pi, et al. "Direct 3d Bioprinting of Perfusable Vascular Constructs Using a Blend Bioink." Biomaterials 106 (Nov 2016): 58-68.

Jose, R. R., M. J. Rodriguez, T. A. Dixon, F. Omenetto, and D. L. Kaplan. "Evolution of Bioinks and Additive Manufacturing Technologies for 3d Bioprinting." Acs Biomaterials Science & Engineering 2, no. 10 (Oct 2016): 1662-78.

Jung, Jangwook P., Meredith K. Bache-Wiig, Paolo P. Provenzano, and Brenda M. Ogle. "Heterogeneous Differentiation of Human Mesenchymal Stem Cells in 3d Extracellular Matrix Composites." BioResearch open access 5, no. 1 (2016): 37.

Jung, Jangwook P., Didarul B. Bhuiyan, and Brenda M. Ogle. "Solid Organ Fabrication: Comparison of Decellularization to 3d Bioprinting." Biomaterials Research 20, no. 1 (2016).

Jung, Jangwook P., Dongjian Hu, Ibrahim J. Domian, and Brenda M. Ogle. "An Integrated Statistical Model for Enhanced Murine Cardiomyocyte Differentiation Via Optimized Engagement of 3d Extracellular Matrices." Scientific reports 5 (2015): 18705.

Jung, Jangwook P., Anthony J. Sprangers, John R. Byce, Jing Su, Jayne M. Squirrell, Phillip B. Messersmith, Kevin W. Eliceiri, and Brenda M. Ogle. "Ecm-Incorporated Hydrogels Cross-Linked Via Native Chemical Ligation to Engineer Stem Cell Microenvironments." Biomacromolecules 14, no. 9 (2013): 3102.

Jung, Jangwook P., Jayne M. Squirrell, Gary E. Lyons, Kevin W. Eliceiri, and Brenda M. Ogle. "Imaging Cardiac Extracellular Matrices: A Blueprint for Regeneration." Trends in Biotechnology 30, no. 4 (2012): 233-40.

Kaiser, N. J., and K. L. K. Coulombe. "Physiologically Inspired Cardiac Scaffolds for Tailored in Vivo Function and Heart Regeneration." Biomedical Materials 10, no. 3 (Jun 2015).

Kamali, P., D. Dean, R. Skoracki, P. G. L. Koolen, M. A. Paul, A. M. S. Ibrahim, and S. J. Lin. "The Current Role of Three-Dimensional Printing in Plastic Surgery." Plastic and Reconstructive Surgery 137, no. 3 (Mar 2016): 1045-55.

Kang, H. W., S. J. Lee, I. K. Ko, C. Kengla, J. J. Yoo, and A. Atala. "A 3d Bioprinting System to Produce Human-Scale Tissue Constructs with Structural Integrity." Nature Biotechnology 34, no. 3 (Mar 2016): 312-+.

Kang, L. H., P. A. Armstrong, L. J. Lee, B. Duan, K. H. Kang, and J. T. Butcher. "Optimizing

Photo-Encapsulation Viability of Heart Valve Cell Types in 3d Printable Composite Hydrogels." Annals of Biomedical Engineering 45, no. 2 (Feb 2017): 360-77.

Kaushik, G., J. Leijten, and A. Khademhosseini. "Concise Review: Organ Engineering: Design, Technology, and Integration." Stem Cells 35, no. 1 (Jan 2017): 51-60.

Kilian, D., T. Ahlfeld, A. R. Akkineni, A. Lode, and M. Gelinsky. "Three-Dimensional Bioprinting of Volumetric Tissues and Organs." Mrs Bulletin 42, no. 8 (Aug 2017): 585-92.

Kim, J. E., S. H. Kim, and Y. Jung. "Current Status of Three-Dimensional Printing Inks for Soft Tissue Regeneration." Tissue Engineering and Regenerative Medicine 13, no. 6 (Dec 2016): 636-46.

Kim, J. H., J. J. Yoo, and S. J. Lee. "Three-Dimensional Cell-Based Bioprinting for Soft Tissue Regeneration." Tissue Engineering and Regenerative Medicine 13, no. 6 (Dec 2016): 647-62.

Kim, J. J., L. Q. Hou, and N. F. Huang. "Vascularization of Three-Dimensional Engineered Tissues for Regenerative Medicine Applications." Acta Biomaterialia 41 (Sep 2016): 17-26.

Kitsara, M., O. Agbulut, D. Kontziampasis, Y. Chen, and P. Menasche. "Fibers for Hearts: A Critical Review on Electrospinning for Cardiac Tissue Engineering." Acta Biomaterialia 48 (Jan 2017): 20-40.

Knowlton, S., S. Onal, C. H. Yu, J. J. Zhao, and S. Tasoglu. "Bioprinting for Cancer Research." Trends in Biotechnology 33, no. 9 (Sep 2015): 504-13.

Koch, L., M. Gruene, C. Unger, and B. Chichkov. "Laser Assisted Cell Printing." Current Pharmaceutical Biotechnology 14, no. 1 (Jan 2013): 91-97.

Kolesky, D. B., K. A. Homan, M. A. Skylar-Scott, and J. A. Lewis. "Three-Dimensional Bioprinting of Thick Vascularized Tissues." Proceedings of the National Academy of Sciences of the United States of America 113, no. 12 (Mar 2016): 3179-84.

Komae, H., H. Sekine, I. Dobashi, K. Matsuura, M. Ono, T. Okano, and T. Shimizu. "Three-Dimensional Functional Human Myocardial Tissues Fabricated from Induced Pluripotent Stem Cells." Journal of Tissue Engineering and Regenerative Medicine 11, no. 3 (Mar 2017): 926-35.

Kucukgul, C., B. Ozler, H. E. Karakas, D. Gozuacik, and B. Koc. "3d Hybrid Bioprinting of Macrovascular Structures." In 3rd International Conference on Tissue Engineering, edited by P. Bartolo and P. Fernandes. Procedia Engineering, 183-92, 2013.

Kucukgul, C., S. B. Ozler, I. Inci, E. Karakas, S. Irmak, D. Gozuacik, A. Taralp, and B. Koc. "3d Bioprinting of Biomimetic Aortic Vascular Constructs with Self-Supporting Cells." Biotechnology and Bioengineering 112, no. 4 (Apr 2015): 811-21.

Kupfer, Molly E., and Brenda M. Ogle. "Advanced Imaging Approaches for Regenerative Medicine: Emerging Technologies for Monitoring Stem Cell Fate in Vitro and in Vivo.(Report)." Biotechnology Journal 10, no. 10 (2015): 1515.

Lantada, A. D., B. P. Sanchez, C. G. Murillo, and J. U. Sotillo. "Fractals in Tissue Engineering: Toward Biomimetic Cell-Culture Matrices, Microsystems and Microstructured Implants." [In English]. Expert Review of Medical Devices 10, no. 5 (Sep 2013): 629-48.

Lee, H., and D. W. Cho. "One-Step Fabrication of an Organ-on-a-Chip with Spatial Heterogeneity Using a 3d Bioprinting Technology." Lab on a Chip 16, no. 14 (2016): 2618-25.

Lee, J. M., and W. Y. Yeong. "Bioprinting for Cardiovascular Tissue Engineering." In Proceedings of the 2nd International Conference on Progress in Additive Manufacturing, edited by C. K. Chua, W. Y. Yeong, M. J. Tan, E. Liu and S. B. Tor. Proceedings of the International Conference on Progress in Additive Manufacturing, 61-66, 2016.

———. "Design and Printing Strategies in 3d Bioprinting of Cell-Hydrogels: A Review." Advanced Healthcare Materials 5, no. 22 (Nov 2016): 2856-65.

Lee, V. K., and G. H. Dai. "Printing of Three-Dimensional Tissue Analogs for Regenerative Medicine." Annals of Biomedical Engineering 45, no. 1 (Jan 2017): 115-31.

Lee, V. K., A. Dias, M. S. Ozturk, K. Chen, B. Tricomi, D. T. Corr, X. Intes, and G. H. Dai. 3d Bioprinting and 3d Imaging for Stem Cell Engineering. Bioprinting in Regenerative Medicine. Edited by K. Turksen. 2015. doi:10.1007/978-3-319-21386-6_2.

Lei, M. J., and X. H. Wang. "Biodegradable Polymers and Stem Cells for Bioprinting." Molecules 21, no. 5 (May 2016).

Levato, R., J. Visser, J. A. Planell, E. Engel, J. Malda, and M. A. Mateos-Timoneda. "Biofabrication of Tissue Constructs by 3d Bioprinting of Cell-Laden Microcarriers." Biofabrication 6, no. 3 (Sep 2014).

Li, J. P., M. J. Chen, X. Q. Fan, and H. F. Zhou. "Recent Advances in Bioprinting Techniques: Approaches, Applications and Future Prospects." Journal of Translational Medicine 14 (Sep 2016).

Li, P., and A. Faulkner. "3d Bioprinting Regulations: A Uk/Eu Perspective." [In English]. European Journal of Risk Regulation 8, no. 2 (Jun 2017): 441-47.

Li, Phoebe andFaulkner, Alex. "3d Bioprinting Regulations: A Uk/Eu Perspective." European Journal of Risk Regulation 8, no. 2 (2017): 8.

Li, S., Y. Y. Liu, C. G. Liu, Y. Li, and Q. X. Hu. "Computational Simulation and Experimental Research of Flow Rates in Coaxial Fluids for Fabricating Hydrogel Fibers." In Second Cirp Conference on Biomanufacturing, edited by P. Bartolo. Procedia Cirp, 94-98, 2016.

Li, Y. C., Y. S. Zhang, A. Akpek, S. R. Shin, and A. Khademhosseini. "4d Bioprinting: The Next-Generation Technology for Biofabrication Enabled by Stimuli-Responsive Materials." Biofabrication 9, no. 1 (Mar 2017).

Lin, H. S., Q. Li, and Y. G. Lei. "Three-Dimensional Tissues Using Human Pluripotent Stem Cell Spheroids as Biofabrication Building Blocks." Biofabrication 9, no. 2 (Jun 2017).

Liu, W. J., Y. S. Zhang, M. A. Heinrich, F. De Ferrari, H. L. Jang, S. M. Bakht, M. M. Alvarez, et al. "Rapid Continuous Multimaterial Extrusion Bioprinting." Advanced Materials 29, no. 3 (Jan 2017).

Loessner, D., C. Meinert, E. Kaemmerer, L. C. Martine, K. Yue, P. A. Levett, T. J. Klein, et al. "Functionalization, Preparation and Use of Cell-Laden Gelatin Methacryloyl-Based Hydrogels as Modular Tissue Culture Platforms." Nature Protocols 11, no. 4 (Apr 2016): 727-46.

Lu, J. Y., Y. M. Hao, W. Zhao, C. Q. Lyu, and D. R. Zou. "Molecular, Cellular and Pharmaceutical Aspects of Autologous Grafts for Peri-Implant Hard and Soft Tissue Defects." Current Pharmaceutical Biotechnology 18, no. 1 (2017): 85-94.

Luzio, A., E. V. Canesi, C. Bertarelli, and M. Caironi. "Electrospun Polymer Fibers for Electronic Applications." Materials 7, no. 2 (Feb 2014): 906-47.

Macdonald, N. P., J. M. Cabot, P. Smejkal, R. M. Guijt, B. Paull, and M. C. Breadmore. "Comparing Microfluidic Performance of Three-Dimensional (3d) Printing Platforms." Analytical Chemistry 89, no. 7 (Apr 2017): 3858-66.

Malchesky, P. S. "Artificial Organs 2012: A Year in Review." Artificial Organs 37, no. 3 (Mar 2013): 324-49.

Malda, J., J. Visser, F. P. Melchels, T. Jungst, W. E. Hennink, W. J. A. Dhert, J. Groll, and D. W. Hutmacher. "25th Anniversary Article: Engineering Hydrogels for Biofabrication." Advanced Materials 25, no. 36 (Sep 2013): 5011-28.

Malheiro, A., P. Wieringa, C. Mota, M. Baker, and L. Moroni. "Patterning Vasculature: The Role of Biofabrication to Achieve an Integrated Multicellular Ecosystem." Acs Biomaterials Science & Engineering 2, no. 10 (Oct 2016): 1694-709.

Mandrycky, C., Z. J. Wang, K. Kim, and D. H. Kim. "3d Bioprinting for Engineering Complex Tissues." Biotechnology Advances 34, no. 4 (Jul-Aug 2016): 422-34.

Marsano, A., C. Conficconi, M. Lemme, P. Occhetta, E. Gaudiello, E. Votta, G. Cerino, A. Redaelli, and M. Rasponi. "Beating Heart on a Chip: A Novel Microfluidic Platform to Generate Functional 3d Cardiac Microtissues." Lab on a Chip 16, no. 3 (Feb 2016): 599-610.

Mather, M. L., S. P. Morgan, D. E. Morris, Q. Zhu, J. Kee, A. Zoladek, J. A. Crowe, et al. "Raman

Spectroscopy and Rotating Orthogonal Polarization Imaging for Non-Destructive Tracking of Collagen Deposition in Tissue Engineered Skin and Tendon." In Optics in Tissue Engineering and Regenerative Medicine Iii, edited by S. J. Kirkpatrick and R. Wang. Proceedings of Spie, 2009.

Meinel, A. J., O. Germershaus, T. Luhmann, H. P. Merkle, and L. Meinel. "Electrospun Matrices for Localized Drug Delivery: Current Technologies and Selected Biomedical Applications." European Journal of Pharmaceutics and Biopharmaceutics 81, no. 1 (May 2012): 1-13.

Melchels, F. P. W., M. A. N. Domingos, T. J. Klein, J. Malda, P. J. Bartolo, and D. W. Hutmacher. "Additive Manufacturing of Tissues and Organs." Progress in Polymer Science 37, no. 8 (Aug 2012): 1079-104.

Memic, A., A. Navaei, B. Mirani, J. A. V. Cordova, M. Aldhahri, A. Dolatshahi-Pirouz, M. Akbari, and M. Nikkhah. "Bioprinting Technologies for Disease Modeling." Biotechnology Letters 39, no. 9 (Sep 2017): 1279-90.

Mills, S. J., A. J. Cowin, and P. Kaur. "Pericytes, Mesenchymal Stem Cells and the Wound Healing Process." Cells 2, no. 3 (2013): 621-34.

Miranda-Nieves, D., and E. L. Chaikof. "Collagen and Elastin Biomaterials for the Fabrication of Engineered Living Tissues." Acs Biomaterials Science & Engineering 3, no. 5 (May 2017): 694-711.

Mironov, V. "Applications of Bioprinting: Challenges and Potential." Bioprinting: Principles and Applications (2015): 255-65.

———. "Bioprinting Techniques." Bioprinting: Principles and Applications (2015): 63-116.

———. "Cell Sources for Bioprinting." Bioprinting: Principles and Applications (2015): 165-77.

———. "Material for Bioprinting." Bioprinting: Principles and Applications (2015): 117-63.

Moldovan, N. I., N. Hibino, and K. Nakayama. "Principles of the Kenzan Method for Robotic Cell Spheroid-Based Three-Dimensional Bioprinting." Tissue Engineering Part B-Reviews 23, no. 3 (Jun 2017): 237-+.

Mosadegh, B., G. L. Xiong, S. Dunham, and J. K. Min. "Current Progress in 3d Printing for Cardiovascular Tissue Engineering." Biomedical Materials 10, no. 3 (Jun 2015).

Moya, M. L., M. Cardona, and E. Wheeler. "Bioprinting Vascular Networks for Engineered Tissue Constructs." Tissue Engineering Part A 21 (Sep 2015): S42-S42.

Mozetic, P., S. M. Giannitelli, M. Gori, M. Trombetta, and A. Rainer. "Engineering Muscle Cell Alignment through 3d Bioprinting." Journal of Biomedical Materials Research Part A 105,

no. 9 (Sep 2017): 2582-88.

Muller, M., J. Becher, M. Schnabelrauch, and M. Zenobi-Wong. "Printing Thermoresponsive Reverse Molds for the Creation of Patterned Two-Component Hydrogels for 3d Cell Culture." Jove-Journal of Visualized Experiments, no. 77 (Jul 2013).

Murphy, S. V., and A. Atala. "3d Bioprinting of Tissues and Organs." Nature Biotechnology 32, no. 8 (Aug 2014): 773-85.

Murphy, S. V., A. Skardal, and A. Atala. "Evaluation of Hydrogels for Bio-Printing Applications." Journal of Biomedical Materials Research Part A 101, no. 1 (Jan 2013): 272-84.

Nam, S. Y., E. Chung, L. J. Suggs, and S. Y. Emelianov. "Combined Ultrasound and Photoacoustic Imaging to Noninvasively Assess Burn Injury and Selectively Monitor a Regenerative Tissue-Engineered Construct." Tissue Engineering Part C-Methods 21, no. 6 (Jun 2015): 557-66.

Nam, S. Y., L. M. Ricles, L. J. Suggs, and S. Y. Emelianov. "Imaging Strategies for Tissue Engineering Applications." Tissue Engineering Part B-Reviews 21, no. 1 (Feb 2015): 88-102.

Ng, W. L., J. M. Lee, W. Y. Yeong, and M. W. Naing. "Microvalve-Based Bioprinting - Process, Bio-Inks and Applications." Biomaterials Science 5, no. 4 (Apr 2017): 632-47.

Ng, W. L., S. Wang, W. Y. Yeong, and M. W. Naing. "Skin Bioprinting: Impending Reality or Fantasy?". Trends in Biotechnology 34, no. 9 (Sep 2016): 689-99.

Nikmaram, N., S. Roohinejad, S. Hashemi, M. Koubaa, F. J. Barba, A. Abbaspourrad, and R. Greiner. "Emulsion-Based Systems for Fabrication of Electrospun Nanofibers: Food, Pharmaceutical and Biomedical Applications." Rsc Advances 7, no. 46 (2017): 28951-64.

Nissan, A. M. "Regulating the Three-Dimensional Future: How the Fda Should Structure Regulatory Mechanism for Additive Manufacturing (3d Printing)." (2014).

Norotte, C., F. S. Marga, L. E. Niklason, and G. Forgacs. "Scaffold-Free Vascular Tissue Engineering Using Bioprinting." Biomaterials 30, no. 30 (Oct 2009): 5910-17.

Nowicki, M. A., N. J. Castro, M. W. Plesniak, and L. G. Zhang. "3d Printing of Novel Osteochondral Scaffolds with Graded Microstructure." Nanotechnology 27, no. 41 (Oct 2016).

Ogle, Brenda, Marilia Cascalho, and Jeffrey L. Platt. "Fusion of Approaches to the Treatment of Organ Failure." American journal of transplantation : official journal of the American Society of Transplantation and the American Society of Transplant Surgeons 4 Suppl 6 (2004): 74.

Ogle, Brenda M., Nenad Bursac, Ibrahim Domian, Ngan F. Huang, Philippe Menasché, Charles E. Murry, Beth Pruitt, et al. "Distilling Complexity to Advance Cardiac Tissue Engineering." Science translational medicine 8, no. 342 (2016): 342ps13.

Ogle, Brenda M., and Sean P. Palecek. "Editorial: Stem Cell Engineering – Discovery, Diagnostics and Therapies." Biotechnology Journal 8, no. 4 (2013): 390-91.

Ong, C. S., T. Fukunishi, H. T. Zhang, C. Y. Huang, A. Nashed, A. Blazeski, D. DiSilvestre, et al. "Biomaterial-Free Three-Dimensional Bioprinting of Cardiac Tissue Using Human Induced Pluripotent Stem Cell Derived Cardiomyocytes." Scientific Reports 7 (Jul 2017).

Orloff, N. D., C. Truong, N. Cira, S. Koo, A. Hamilton, S. Choi, V. Wu, and I. H. Riedel-Kruse. "Integrated Bioprinting and Imaging for Scalable, Networkable Desktop Experimentation." Rsc Advances 4, no. 65 (2014): 34721-28.

Ouyang, L. L., R. Yao, S. S. Mao, X. Chen, J. Na, and W. Sun. "Three-Dimensional Bioprinting of Embryonic Stem Cells Directs Highly Uniform Embryoid Body Formation." [In English]. Biofabrication 7, no. 4 (Dec 2015): 12.

Ozbolat, I. T. "Bioprinting Scale-up Tissue and Organ Constructs for Transplantation." Trends in Biotechnology 33, no. 7 (Jul 2015): 395-400.

Ozbolat, I. T., H. Chen, and Y. Yu. "Development of 'Multi-Arm Bioprinter' for Hybrid Biofabrication of Tissue Engineering Constructs." Robotics and Computer-Integrated Manufacturing 30, no. 3 (Jun 2014): 295-304.

Ozbolat, I. T., and M. Hospodiuk. "Current Advances and Future Perspectives in Extrusion-Based Bioprinting." Biomaterials 76 (Jan 2016): 321-43.

Ozbolat, I. T., W. J. Peng, and V. Ozbolat. "Application Areas of 3d Bioprinting." Drug Discovery Today 21, no. 8 (Aug 2016): 1257-71.

Ozbolat, I. T., and Y. Yu. "Bioprinting toward Organ Fabrication: Challenges and Future Trends." Ieee Transactions on Biomedical Engineering 60, no. 3 (Mar 2013): 691-99.

Ozler, S. B., C. Kucukgul, and B. Koc. Bioprinting with Live Cells. Bioprinting in Regenerative Medicine. Edited by K. Turksen. 2015. doi:10.1007/978-3-319-21386-6_3.

Panwar, A., and L. P. Tan. "Current Status of Bioinks for Micro-Extrusion-Based 3d Bioprinting." Molecules 21, no. 6 (Jun 2016).

Park, J. H., J. Jang, J. S. Lee, and D. W. Cho. "Current Advances in Three-Dimensional Tissue/Organ Printing." Tissue Engineering and Regenerative Medicine 13, no. 6 (Dec 2016): 612-21.

Park, S. H., C. S. Jung, and B. H. Min. "Advances in Three-Dimensional Bioprinting for Hard

Tissue Engineering." Tissue Engineering and Regenerative Medicine 13, no. 6 (Dec 2016): 622-35.

Paslaru, E., B. S. Munteanu, and C. Vasile. Electrospun Nanostructures as Biodegradable Composite Materials for Biomedical Applications. Biodegradable Polymeric Nanocomposites: Advances in Biomedical Applications. Edited by D. Depan. 2016.

Pati, Falguni, and Dong-Woo Cho. "Bioprinting of 3d Tissue Models Using Decellularized Extracellular Matrix Bioink." In 3d Cell Culture: Methods and Protocols, edited by Zuzana Koledova, 381-90. New York, NY: Springer New York, 2017.

Pati, F., J. Gantelius, and H. A. Svahn. "3d Bioprinting of Tissue/Organ Models." Angewandte Chemie-International Edition 55, no. 15 (Apr 2016): 4650-65.

Pati, F., J. Jang, D. H. Ha, S. W. Kim, J. W. Rhie, J. H. Shim, D. H. Kim, and D. W. Cho. "Printing Three-Dimensional Tissue Analogues with Decellularized Extracellular Matrix Bioink." Nature Communications 5 (Jun 2014).

Paulsen, S. J., and J. S. Miller. "Tissue Vascularization through 3d Printing: Will Technology Bring Us Flow?". Developmental Dynamics 244, no. 5 (May 2015): 629-40.

Pedde, R. D., B. Mirani, A. Navaei, T. Styan, S. Wong, M. Mehrali, A. Thakur, et al. "Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs." Advanced Materials 29, no. 19 (May 2017).

Peng, W. J., D. Unutmaz, and I. T. Ozbolat. "Bioprinting Towards Physiologically Relevant Tissue Models for Pharmaceutics." Trends in Biotechnology 34, no. 9 (Sep 2016): 722-32.

Pereira, R. F., and P. J. Bartolo. "3d Bioprinting of Photocrosslinkable Hydrogel Constructs." Journal of Applied Polymer Science 132, no. 48 (Dec 2015).

Petcu, E. B. "3d Bio-Printing: An Introduction to a New Approach for Cancer Patients at the Interface of Art and Medicine." Leonardo 50, no. 2 (Apr 2017): 195-96.

Puppi, D., A. Pirosa, G. Lupi, P. A. Erba, G. Giachi, and F. Chiellini. "Design and Fabrication of Novel Polymeric Biodegradable Stents for Small Caliber Blood Vessels by Computer-Aided Wet-Spinning." Biomedical Materials 12, no. 3 (Jun 2017).

Qi, Y., H. Wang, K. Wei, Y. Yang, R. Y. Zheng, I. S. Kim, and K. Q. Zhang. "A Review of Structure Construction of Silk Fibroin Biomaterials from Single Structures to Multi-Level Structures." International Journal of Molecular Sciences 18, no. 3 (Mar 2017).

Radhakrishnan, J., U. M. Krishnan, and S. Sethuraman. "Hydrogel Based Injectable Scaffolds for Cardiac Tissue Regeneration." Biotechnology Advances 32, no. 2 (Mar-Apr 2014): 449-61.

Raphael, B., T. Khalil, V. L. Workman, A. Smith, C. P. Brown, C. Streuli, A. Saiani, and M. Domingos. "3d Cell Bioprinting of Self-Assembling Peptide-Based Hydrogels." Materials Letters 190 (Mar 2017): 103-06.

Ravnic, D. J., A. N. Leberfinger, S. V. Koduru, M. Hospodiuk, K. K. Moncal, P. Datta, M. Dey, E. Rizk, and I. T. Ozbolat. "Transplantation of Bioprinted Tissues and Organs Technical and Clinical Challenges and Future Perspectives." Annals of Surgery 266, no. 1 (Jul 2017): 48-58.

Ren, X., and H. C. Ott. "On the Road to Bioartificial Organs." Pflugers Archiv-European Journal of Physiology 466, no. 10 (Oct 2014): 1847-57.

Rezende, R., S. Balashov, J. Da Silva, V. Mironov, and V. Kasyanov. Organ Printing: Past, Present and Future. Proceedings of the 1st International Conference on Progress in Additive Manufacturing. Edited by C. C. Kai, Y. W. Yee, T. M. Jen and L. Erjia. 2014. doi:10.3850/978-981-09-0446-3_108.

Rezende, R. A., V. Kasyanov, I. Ozolanta, K. Brakke, J. V. L. da Silva, and V. Mironov. "Design of Vascular Tree for Organ Bioprinting." In 23 European Symposium on Computer Aided Process Engineering, edited by A. Kraslawski and I. Turunen. Computer Aided Chemical Engineering, 151-56, 2013.

Rezende, R. A., Fdas Pereira, V. Kasyanov, D. T. Kemmoku, I. Maia, J. V. L. da Silva, and V. Mironov. "Scalable Biofabrication of Tissue Spheroids for Organ Printing." In First Cirp Conference on Biomanufacturing, edited by M. Mitsuishi and P. Bartolo. Procedia Cirp, 276-81, 2013.

Richards, D., J. Jia, M. Yost, R. Markwald, and Y. Mei. "3d Bioprinting for Vascularized Tissue Fabrication." Annals of Biomedical Engineering 45, no. 1 (Jan 2017): 132-47.

Riester, D., J. Budde, C. Gach, A. Gillner, and M. Wehner. "High Speed Photography of Laser Induced Forward Transfer (Lift) of Single and Double-Layered Transfer Layers for Single Cell Transfer." Journal of Laser Micro Nanoengineering 11, no. 2 (Jul 2016): 199-203.

Rijal, N. P., U. Adhikari, and N. Bhattarai. "Production of Electrospun Chitosan for Biomedical Applications." In Chitosan Based Biomaterials, Vol 1: Fundamentals, edited by J. A. Jennings and J. D. Bumgardner. Woodhead Publishing Series in Biomaterials, 211-37, 2017.

Rimann, M., E. Bono, H. Annaheim, M. Bleisch, and U. Graf-Hausner. "Standardized 3d Bioprinting of Soft Tissue Models with Human Primary Cells." Jala 21, no. 4 (Aug 2016): 496-509.

Roseti, L., V. Parisi, M. Petretta, C. Cavallo, G. Desando, I. Bartolotti, and B. Grigolo. "Scaffolds for Bone Tissue Engineering: State of the Art and New Perspectives." Materials Science & Engineering C-Materials for Biological Applications 78 (Sep 2017): 1246-62.

Rothschild, L. J. "Synthetic Biology Meets Bioprinting: Enabling Technologies for Humans on Mars (and Earth)." Biochemical Society Transactions 44 (Aug 2016): 1158-64.

Rutz, A. L., P. L. Lewis, and R. N. Shah. "Toward Next-Generation Bioinks: Tuning Material Properties Pre- and Post-Printing to Optimize Cell Viability." Mrs Bulletin 42, no. 8 (Aug 2017): 563-70.

Sadeghi, A. H., S. R. Shin, J. C. Deddens, G. Fratta, S. Mandla, I. K. Yazdi, G. Prakash, et al. "Engineered 3d Cardiac Fibrotic Tissue to Study Fibrotic Remodeling." Advanced Healthcare Materials 6, no. 11 (Jun 2017).

Saludas, L., S. Pascual-Gil, F. Prosper, E. Garbayo, and M. Blanco-Prieto. "Hydrogel Based Approaches for Cardiac Tissue Engineering." International Journal of Pharmaceutics 523, no. 2 (May 2017): 454-75.

Salvador, M. R., and A. M. H. de Menendez. "Major Advances in Ophthalmology: Emergence of Bio-Additive Manufacturing." Journal of Intelligence Studies in Business 6, no. 1 (2016): 59-65.

Sanchez, L. D., N. Brack, A. Postma, P. J. Pigram, and L. Meagher. "Surface Modification of Electrospun Fibres for Biomedical Applications: A Focus on Radical Polymerization Methods." Biomaterials 106 (Nov 2016): 24-45.

Sari, D. P., S. Bang, L. Nguyen, Y. Cho, K. D. Park, S. Lee, I. Lee, S. M. Zhang, and I. Noh. "Micro/Nano Surface Topography and 3d Bioprinting of Biomaterials in Tissue Engineering." Journal of Nanoscience and Nanotechnology 16, no. 9 (Sep 2016): 8909-22.

Saunders, R. E., and B. Derby. "Inkjet Printing Biomaterials for Tissue Engineering: Bioprinting." International Materials Reviews 59, no. 8 (Nov 2014): 430-48.

Schmuck, Eric, Jacob Mulligan, Rebecca Ertel, Nicholas Kouris, Brenda Ogle, Amish Raval, and Kurt Saupe. "Cardiac Fibroblast-Derived 3d Extracellular Matrix Seeded with Mesenchymal Stem Cells as a Novel Device to Transfer Cells to the Ischemic Myocardium." Cardiovascular Engineering and Technology 5, no. 1 (2014): 119-31.

Schroer, A. K., M. S. Shotwell, V. Y. Sidorov, J. P. Wikswo, and W. D. Merryman. "I-Wire Heart-on-a-Chip Ii: Biomechanical Analysis of Contractile, Three-Dimensional Cardiomyocyte Tissue Constructs." Acta Biomaterialia 48 (Jan 2017): 79-87.

Sears, N. A., D. R. Seshadri, P. S. Dhavalikar, and E. Cosgriff-Hernandez. "A Review of Three-Dimensional Printing in Tissue Engineering." Tissue Engineering Part B-Reviews 22, no. 4 (Aug 2016): 298-310.

Seliktar, D., D. Dikovsky, and E. Napadensky. "Bioprinting and Tissue Engineering: Recent Advances and Future Perspectives." Israel Journal of Chemistry 53, no. 9-10 (Oct 2013):

795-804.

Selvaganapathy, P. R., and R. Attalla. "Microfluidic Vascular Channels in Gels Using Commercial 3d Printers." In Microfluidics, Biomems, and Medical Microsystems Xiv, edited by B. L. Gray and H. Becker. Proceedings of Spie, 2016.

Seol, Y. J., H. W. Kang, S. J. Lee, A. Atala, and J. J. Yoo. "Bioprinting Technology and Its Applications." European Journal of Cardio-Thoracic Surgery 46, no. 3 (Sep 2014): 342-48.

Shafiee, A., and A. Atala. "Printing Technologies for Medical Applications." Trends in Molecular Medicine 22, no. 3 (Mar 2016): 254-65.

———. "Tissue Engineering: Toward a New Era of Medicine." In Annual Review of Medicine, Vol 68, edited by C. T. Caskey. Annual Review of Medicine, 29-40, 2017.

Shim, J. H., K. M. Jang, S. K. Hahn, J. Y. Park, H. Jung, K. Oh, K. M. Park, et al. "Three-Dimensional Bioprinting of Multilayered Constructs Containing Human Mesenchymal Stromal Cells for Osteochondral Tissue Regeneration in the Rabbit Knee Joint." Biofabrication 8, no. 1 (Mar 2016).

Shin, S. R., R. Farzad, A. Tamayol, V. Manoharan, P. Mostafalu, Y. S. Zhang, M. Akbari, et al. "A Bioactive Carbon Nanotube-Based Ink for Printing 2d and 3d Flexible Electronics." Advanced Materials 28, no. 17 (May 2016): 3280-89.

Short, A. R., D. Koralla, A. Deshmukh, B. Wissel, B. Stocker, M. Calhoun, D. Dean, and J. O. Winter. "Hydrogels That Allow and Facilitate Bone Repair, Remodeling, and Regeneration." Journal of Materials Chemistry B 3, no. 40 (2015): 7818-30.

Sidorov, V. Y., P. C. Samson, T. N. Sidorova, J. M. Davidson, C. C. Lim, and J. P. Wikswo. "I-Wire Heart-on-a -Chip I: Three-Dimensional Cardiac Tissue Constructs for Physiology and Pharmacology." Acta Biomaterialia 48 (Jan 2017): 68-78.

Simon-Yarza, T., I. Bataille, and D. Letourneur. "Cardiovascular Bio-Engineering: Current State of the Art." Journal of Cardiovascular Translational Research 10, no. 2 (Apr 2017): 180-93.

Skardal, A., and A. Atala. "Biomaterials for Integration with 3-D Bioprinting." Annals of Biomedical Engineering 43, no. 3 (Mar 2015): 730-46.

Skardal, A., J. X. Zhang, and G. D. Prestwich. "Bioprinting Vessel-Like Constructs Using Hyaluronan Hydrogels Crosslinked with Tetrahedral Polyethylene Glycol Tetracrylates." Biomaterials 31, no. 24 (Aug 2010): 6173-81.

Sklare, S. C., W. L. Richey, B. T. Vinson, and D. B. Chrisey. "Directed Self-Assembly Software for Single Cell Deposition." International Journal of Bioprinting 3, no. 2 (2017): 100-08.

Smith, M. H., C. L. Flanagan, J. M. Kemppainen, J. A. Sack, H. Chung, S. Das, S. J. Hollister, and S.

E. Feinberg. "Computed Tomography-Based Tissue-Engineered Scaffolds in Craniomaxillofacial Surgery." [In English]. International Journal of Medical Robotics and Computer Assisted Surgery 3, no. 3 (Sep 2007): 207-16.

Su, Ping-Jung, Quyen A. Tran, Jimmy J. Fong, Kevin W. Eliceiri, Brenda M. Ogle, and Paul J. Campagnola. "Mesenchymal Stem Cell Interactions with 3d Ecm Modules Fabricated Via Multiphoton Excited Photochemistry." Biomacromolecules 13, no. 9 (2012): 2917.

Sun, X. T., and S. S. Nunes. "Overview of Hydrogel-Based Strategies for Application in Cardiac Tissue Regeneration." Biomedical Materials 10, no. 3 (Jun 2015).

Sun, Y. S., Y. Y. Liu, S. Li, C. E. Liu, and Q. X. Hu. "Novel Compound-Forming Technology Using Bioprinting and Electrospinning for Patterning a 3d Scaffold Construct with Multiscale Channels." Micromachines 7, no. 12 (Dec 2016).

Suntornnond, R., J. An, and C. K. Chua. "Bioprinting of Thermoresponsive Hydrogels for Next Generation Tissue Engineering: A Review." Macromolecular Materials and Engineering 302, no. 1 (Jan 2017).

Suwantong, O. "Biomedical Applications of Electrospun Polycaprolactone Fiber Mats." Polymers for Advanced Technologies 27, no. 10 (Oct 2016): 1264-73.

Tasoglu, S., and U. Demirci. "Bioprinting for Stem Cell Research." Trends in Biotechnology 31, no. 1 (Jan 2013): 10-19.

Teodori, L., A. Crupi, A. Costa, A. Diaspro, S. Melzer, and A. Tarnok. "Three-Dimensional Imaging Technologies: A Priority for the Advancement of Tissue Engineering and a Challenge for the Imaging Community." Journal of Biophotonics 10, no. 1 (Jan 2017): 24-45.

Tiburcy, M., J. E. Hudson, P. Balfanz, S. Schlick, T. Meyer, M. L. C. Liao, E. Levent, et al. "Defined Engineered Human Myocardium with Advanced Maturation for Applications in Heart Failure Modeling and Repair." Circulation 135, no. 19 (May 2017): 1832-+.

Tormos, C. J., and S. V. Madihally. "Chitosan for Cardiac Tissue Engineering and Regeneration." In Chitosan Based Biomaterials, Vol 2: Tissue Engineering and Therapeutics, edited by J. A. Jennings and J. D. Bumgardner. Woodhead Publishing Series in Biomaterials, 115-43, 2017.

Tran, Jasper L. "To Bioprint or Not to Bioprint." North Carolina Journal of law & Technology 17, no. 1 (October 2015 2015).

Tsiropoulos, I., M. Andersen, and J. Hallas. "Adverse Events with Use of Antiepileptic Drugs: A Prescription and Event Symmetry Analysis." Pharmacoepidemiology & Drug Safety 18, no. 6 (2009): 483-91.

Varma, D. R. "Managing Dicom Images: Tips and Tricks for the Radiologist." Indian Journal of

Radiology & Imaging 22, no. 1: 4-13.

Vermeulen, Niki et al. "3d Bioprint Me: A Socioethical View of Bioprinting Human Organs and Tissues." J med Ethics 43 (2017): 7.

Vijayavenkataraman, S., W. F. Lu, and J. Y. H. Fuh. "3d Bioprinting of Skin: A State-of-the-Art Review on Modelling, Materials, and Processes." Biofabrication 8, no. 3 (Sep 2016).

Visscher, D. O., E. Farre-Guasch, M. N. Helder, S. Gibbs, T. Forouzanfar, P. P. van Zuijlen, and J. Wolff. "Advances in Bioprinting Technologies for Craniofacial Reconstruction." Trends in Biotechnology 34, no. 9 (Sep 2016): 700-10.

Voronov, R. S., S. B. VanGordon, R. L. Shambaugh, D. V. Papavassiliou, and V. I. Sikavitsas. "3d Tissue-Engineered Construct Analysis Via Conventional High-Resolution Microcomputed Tomography without X-Ray Contrast." Tissue Engineering Part C-Methods 19, no. 5 (May 2013): 327-35.

Vunjak-Novakovic, G. "Tissue Engineering of the Heart: An Evolving Paradigm." Journal of Thoracic and Cardiovascular Surgery 153, no. 3 (Mar 2017): 593-95.

Wang, L., G. Huang, B. Sha, S. Wang, Y. L. Han, J. Wu, Y. Li, et al. "Engineering Three-Dimensional Cardiac Microtissues for Potential Drug Screening Applications." Current Medicinal Chemistry 21, no. 22 (2014): 2497-509.

Wang, S. H. M., S. P. Chang, J. Shi, and Asme. Determination of Sustainable Design-Centered Factors for Manufacturing Bioprinting Material of Polylactic Acid. [in English] Proceedings of the Asme 10th International Manufacturing Science and Engineering Conference, 2015, Vol 2. New York: Amer Soc Mechanical Engineers, 2015.

Wang, X. H., Q. Ao, X. H. Tian, J. Fan, Y. J. Wei, W. J. Hou, H. Tong, and S. L. Bai. "3d Bioprinting Technologies for Hard Tissue and Organ Engineering." Materials 9, no. 10 (Oct 2016).

Wanjare, M., and N. F. Huang. "Regulation of the Microenvironment for Cardiac Tissue Engineering." Regenerative Medicine 12, no. 2 (Mar 2017): 187-201.

Weinberger, F., I. Mannhardt, and T. Eschenhagen. "Engineering Cardiac Muscle Tissue a Maturating Field of Research." Circulation Research 120, no. 9 (Apr 2017): 1487-500.

Williams, S. K., and J. B. Hoying. Bioinks for Bioprinting. Bioprinting in Regenerative Medicine. Edited by K. Turksen. 2015. doi:10.1007/978-3-319-21386-6_1.

Wlodarczyk-Biegun, M. K., and A. del Campo. "3d Bioprinting of Structural Proteins." Biomaterials 134 (Jul 2017): 180-201.

Wu, C. S., B. Wang, C. Zhang, R. A. Wysk, and Y. W. Chen. "Bioprinting: An Assessment Based on Manufacturing Readiness Levels." Critical Reviews in Biotechnology 37, no. 3 (May

2017): 333-54.

Xin, Y., G. Chai, T. Zhang, X. S. Wang, M. Qu, A. Tan, M. L. Bogari, et al. "Analysis of Multiple Types of Human Cells Subsequent to Bioprinting with Electrospraying Technology." Biomedical Reports 5, no. 6 (Dec 2016): 723-30.

Xiong, R. T., K. Christensen, J. Z. Fu, R. R. Markwald, Y. Huang, and Ieee. "Freeform Laser and Inkjet Printing of Biological Constructs." 2016 International Symposium on Flexible Automation (Isfa) (2016): 243-46.

Xiong, R. T., Z. Y. Zhang, W. X. Chai, Y. Huang, and D. B. Chrisey. "Freeform Drop-on-Demand Laser Printing of 3d Alginate and Cellular Constructs." Biofabrication 7, no. 4 (Dec 2015).

Xu, S. X., L. D. Deng, J. H. Zhang, L. Yin, and A. Dong. "Composites of Electrospun-Fibers and Hydrogels: A Potential Solution to Current Challenges in Biological and Biomedical Field." Journal of Biomedical Materials Research Part B-Applied Biomaterials 104, no. 3 (Apr 2016): 640-56.

Xu, T., J. I. Rodriguez-Devora, D. Reyna-Soriano, B. Mohammod, L. Zhu, K. Wang, and Y. Yuan. "Bioprinting for Constructing Microvascular Systems for Organs." In Rapid Prototyping of Biomaterials: Principles and Applications, edited by R. Narayan. Woodhead Publishing Series in Biomaterials, 201-20, 2014.

Xu, T., W. X. Zhao, J. M. Zhu, M. Z. Albanna, J. J. Yoo, and A. Atala. "Complex Heterogeneous Tissue Constructs Containing Multiple Cell Types Prepared by Inkjet Printing Technology." Biomaterials 34, no. 1 (Jan 2013): 130-39.

Xue, Y. F., V. Sant, J. Phillippi, and S. Sant. "Biodegradable and Biomimetic Elastomeric Scaffolds for Tissue Engineered Heart Valves." Acta Biomaterialia 48 (Jan 2017): 2-19.

Yang, Q. Z., Q. Lian, and F. Xu. "Perspective: Fabrication of Integrated Organ-on-a-Chip Via Bioprinting." Biomicrofluidics 11, no. 3 (May 2017).

Yeong, W. Y., and C. K. Chua. "Implementing Additive Manufacturing for Medical Devices: A Quality Perspective." [In English]. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping (2014): 115-20.

Yoo, S. S. "3d-Printed Biological Organs: Medical Potential and Patenting Opportunity." [In English]. Expert Opinion on Therapeutic Patents 25, no. 5 (May 2015): 507-11.

Yu, Y., K. K. Moncal, J. Q. Li, W. J. Peng, I. Rivero, J. A. Martin, and I. T. Ozbolat. "Three-Dimensional Bioprinting Using Self-Assembling Scalable Scaffold-Free "Tissue Strands" as a New Bioink." Scientific Reports 6 (Jun 2016).

Yu, Y., Y. H. Zhang, and I. T. Ozbolat. "A Hybrid Bioprinting Approach for Scale-up Tissue Fabrication." Journal of Manufacturing Science and Engineering-Transactions of the

Asme 136, no. 6 (Dec 2014).

Zadpoor, A. A. "Mechanics of Additively Manufactured Biomaterials." Journal of the Mechanical Behavior of Biomedical Materials 70 (Jun 2017): 1-6.

Zafar, M., S. Najeeb, Z. Khurshid, M. Vazirzadeh, S. Zohaib, B. Najeeb, and F. Sefat. "Potential of Electrospun Nanofibers for Biomedical and Dental Applications." Materials 9, no. 2 (Feb 2016).

Zhan, Y. S., M. Duchamp, R. Oklu, L. W. Ellisen, R. Langer, and A. Khademhosseini. "Bioprinting the Cancer Microenvironment." Acs Biomaterials Science & Engineering 2, no. 10 (Oct 2016): 1710-21.

Zhang, X. Y., and Y. D. Zhang. "Tissue Engineering Applications of Three-Dimensional Bioprinting." Cell Biochemistry and Biophysics 72, no. 3 (Jul 2015): 777-82.

Zhang, Y. S., J. Aleman, A. Arneri, S. Bersini, F. Piraino, S. R. Shin, M. R. Dokmeci, and A. Khademhosseini. "From Cardiac Tissue Engineering to Heart-on-a-Chip: Beating Challenges." Biomedical Materials 10, no. 3 (Jun 2015).

Zhang, Y. S., A. Arneri, S. Bersini, S. R. Shin, K. Zhu, Z. Goli-Malekabadi, J. Aleman, et al. "Bioprinting 3d Microfibrous Scaffolds for Engineering Endothelialized Myocardium and Heart-on-a-Chip." Biomaterials 110 (Dec 2016): 45-59.

Zhang, Y. S., K. Yue, J. Aleman, K. Mollazadeh-Moghaddam, S. M. Bakht, J. Z. Yang, W. T. Jia, et al. "3d Bioprinting for Tissue and Organ Fabrication." Annals of Biomedical Engineering 45, no. 1 (Jan 2017): 148-63.

Zhang, Z. Y., C. X. Xu, R. T. Xiong, D. B. Chrisey, and Y. Huang. "Effects of Living Cells on the Bioink Printability During Laser Printing." Biomicrofluidics 11, no. 3 (May 2017).

Zhao, W., J. J. Li, K. X. Jin, W. L. Liu, X. F. Qiu, and C. R. Li. "Fabrication of Functional Plga-Based Electrospun Scaffolds and Their Applications in Biomedical Engineering." Materials Science & Engineering C-Materials for Biological Applications 59 (Feb 2016): 1181-94.

Zhou, Y. F. "The Application of Ultrasound in 3d Bio-Printing." Molecules 21, no. 5 (May 2016).

Zhu, K., S. R. Shin, T. van Kempen, Y. C. Li, V. Ponraj, A. Nasajpour, S. Mandla, et al. "Gold Nanocomposite Bioink for Printing 3d Cardiac Constructs." Advanced Functional Materials 27, no. 12 (Mar 2017).

Zhu, W., X. Y. Ma, M. L. Gou, D. Q. Mei, K. Zhang, and S. C. Chen. "3d Printing of Functional Biomaterials for Tissue Engineering." Current Opinion in Biotechnology 40 (Aug 2016): 103-12.

Zhu, W., X. Qu, J. Zhu, X. Y. Ma, S. Patel, J. Liu, P. R. Wang, et al. "Direct 3d Bioprinting of

Prevascularized Tissue Constructs with Complex Microarchitecture." Biomaterials 124 (Apr 2017): 106-15.