biomax - meherrin ag & chemical · 2015. 8. 13. · biomax can be ground applied or injected...

49

Agro-K Corporation 8030 Main Street, N.E. Minneapolis, MN 55432-1844 U.S.A. (800) 328-2418 • (763) 780-4116 www.agro-k.com

Item# 579

Directions for Commercial Use: Ground apply BioMax at a rate of 1 to 2 quarts per acre. BioMax can be ground applied or injected through most irrigation systems including drip and center pivots. If ground applying, ensure that BioMax is incorporated into the soil within two weeks after application, either mechanically or with sufficient water to wet soil to a depth of 1 inch. BioMax can be mixed with most fertilizers and pesticides. A compatibility check is recommended. BioMax is intended to supplement and enhance a full ground fertility program as recommended in accordance with a reliable soil analysis. If you have any questions regarding mixing or application rates contact your Agro-K dealer before using this product.

Warning: Do not put BioMax through sub-surface irrigation tape that has been pre-treated with herbicides. Do not mix BioMax with pre-emergent herbicides.

Information regarding the contents and levels of metals in this product

is available on the internet at http://www.aapfco.org/metals.htm.

Warranty1.-The manufacturer guarantees and warrants that the content and the total net weight are as stated within lawful limits.

2.-Liability of Agro-K Corporation under this warranty or otherwise shall be limited to refund of the purchase price and such refund is expressly agreed by the buyer to be the exclusive remedy.

Agro-K Corporation makes no other expressed or implied guarantee, warranty or representation, including warranties of merchantability and fitness for a purpose. Agro-K Corporation shall not be liable for direct consequential or incidental damages. No modifications of this warranty and the disclaimers herein are authorized or valid unless expressed in writing and signed by Agro-K Corporation.

SHAKE WELL BEFORE USE KEEP OUT OF REACH OF CHILDREN

Derived from Cobalt Carbonate, Manganese Sulfate, Zinc Sulfate

Guaranteed Analysis:Cobalt (Co) 0.12%

Manganese (Mn) 1.50%Zinc (Zn) 3.50%

o Net Wgt. 9 lbs./1 gal. Net Wgt. 4.08 kg /3.78L

o Net Wgt. 22.5 lbs. /2.5 gal. Net Wgt. 10.21kg /9.46L

BioMaxScience-Driven Nutrition SM

Biological Products 579

51

BIO

MA

X™

Better Soils, Better CropsBioM

ax is the best, most efficient

way to im

prove soil biology and root environm

ent. BioMax im

proves soil function in all cropping system

s resulting in better root and plant health and increased soil nutrient efficiency. BioM

ax increases beneficial microbial

populations after fumigation and can

be used for better establishment of new

perennial crops. If increased soil health and resulting im

provement in crop

performance is w

hat you need – BioMax

is your answer.

BioMax is a soil biological stim

ulator that increases aerobic bacteria (vs. anaerobic) and beneficial fungi, such as m

ycorrhizae. BioMax contains specific

food sources, micronutrients and

enzymes that stim

ulate and increase beneficial bacteria and fungal activity and populations. BioM

ax does not contain live biological organism

s or hum

ic acid, nor is it a “compost tea”.

Packaged soil biological products such as m

ycorrhizal fungi are cultured in sterile environm

ents and therefore not adapted to specific soil, crop and environm

ental conditions, w

hich often limits their

longevity and effectiveness. They also require proper storage, handling and application preparation. C

ompost teas

require proper over sight, equipment

and regulated aeration to ensure the bacteria survive, w

hich is labor intensive and costly. BioM

ax naturally causes a significant increase in beneficial bacteria and m

ycorrhizal fungi populations that are already adapted to the crop and soils on your farm

, making them

m

ore effective and consistent than other alternatives. This m

akes BioMax

the clear choice to improve fertilizer

efficiency, yield and quality.

Ground applied fertilizers – especially

phosphate and potassium are rapidly

bound up in the soil structure leaving only a sm

all portion of the nutrients available for root uptake. It is biological activity that releases nutrients from

the soil structure. BioM

ax, by increasing biological populations and activity, m

aximizes nutrient availability to the

roots improving efficiency of ground-

applied fertilizers. Enhancing soil nutrient availability can directly increase both crop quality and yield.

Science-Driven NutritionSM

52

How

does BioM

ax work?

BioMax increases the native beneficial

soil microbial populations for a

temporary tim

e period (generally 3-4 w

eeks). The increase will vary by soil

type and conditions but can range from

5-20 times norm

al population levels. BioM

ax naturally encourages an increase in native m

icrobial populations. The increase in biological activity results in additional production and releases of carbon dioxide and organic acids.

The significant additional release of carbon dioxide causes a natural aeration effect in the soil. This results in im

proved soil tilth and moisture

penetration. This can be very beneficial in soils w

ith hardpan layers and/or poorly drained or overly w

et soils.

The additional production of organic acids and m

icrobial exudates released

into the soil increases the binding of soil particles, w

hich increases the water

holding capacity of the soil. In irrigated high value cropping system

s in arid grow

ing regions increased moisture

holding capacity is beneficial to yield potential and reducing irrigation expenses.

Recom

mended A

pplications: The recom

mended rate of BioM

ax is 1-2 quarts per acre. U

sed on a regular basis (1 to 2 tim

es annually depending on the crop and location), BioM

ax can im

prove soil function, root health and environm

ent, which w

ill improve yield

and crop quality.

Recom

mended C

ropping Systems

for Bio-M

ax: BioM

ax is highly recomm

ended for perennial tree, vine and berry crops. BioM

ax should be applied in the spring

and early fall. This timing coincides

with a natural increase in soil biological

activity and root growth – am

plifying both processes. BioM

ax can be applied via m

ost irrigation systems or band-

sprayed. For new tree, vine and berry

plantings – BioMax can be applied

via drip, banded and watered in or in

the planting hole. Re-apply in 45 days

and again in early fall via irrigation or ground spraying.

BioMax is highly recom

mended for

higher value row crops, such as all

vegetables, melons, potatoes, onions,

sugar beets, sweet corn, beans and

alfalfa. BioMax can be applied pre-plant

during ground or bed preparation, at planting (either in-furrow

or in the planting hole), or post-planting (via irrigation or band-sprayed).

Agro

-K C

orp

oratio

n

8030 Main S

treet, N.E

. M

inneapolis, MN

55432-1844 U.S

.A.

(800) 328-2418 • (763) 780-4116 w

ww

.agro-k.com

53

Bio-Mulch™ 7-0-0Agro-K Corporation 8030 Main Street, N.E. Minneapolis, MN 55432-1844 U.S.A. (800) 328-2418 • (763) 780-4116 www.agro-k.com

Item# 580

Directions for Commercial Use:Bio-Mulch™ is designed to accelerate the decomposition of crop residue and enhance nutrient cycling. Bio-Mulch™ works by encouraging the natural bio-degradation process. Bio-Mulch™ needs adequate soil moisture to work. Dry soils should be irrigated or product should be applied prior to a rain event. Bio-Mulch™ needs to be in contact with soil and crop residue to work effectively.

For annual crops - the most effective time to apply Bio-Mulch™ is at or immediately post harvest. Chopping and discing crop residue will increase the speed at which Bio-Mulch™ works but is not necessary for the product to work. Bio-Mulch™ will work effectively in no-till agriculture.

For perennial crops - Bio-Mulch can be applied at any time during the growing season where compost, cover crops, wood chips or other residue needs to be broken down.

Apply Bio-Mulch™ at 1-2qts/ac. Bio-Mulch™ can be applied by ground or aerial application or via irrigation equipment. If soil surface is dry, it is recommended to apply Bio-Mulch™ with adequate water to wet soil surface. If soil moisture level is adequate or if crop residue will be tilled or disced under, minimal water is needed during application.






SHAKE WELL BEFORE USE WARning KEEP OUT OF REACH OF CHiLDREn

Derived from Low Biuret Urea, Cobalt Carbonate

guaranteed Analysis:Total nitrogen (n) 7.0%

7.0% Urea nitrogenCobalt (Co) 0.20%

Net Wgt. 22.5 lbs. /2.5 gal

Science-Driven Nutrition SM


55

Bio

-Mu

lch

™

Eliminate Your Crop Residue Problem

s Turn Years Into M

onths

Bio-Mulch accelerates crop residue break dow

n and increases nutrient cycling and nutrient availability in the soil. Bio-M

ulch is specifically designed to reduce crop residue build-up on the soil surface resulting in im

proved planting, seed placement and germ

ination.

How

Does B

io-Mulch W

ork? Bio-M

ulch is a unique blend of nutrients and fermentation enzym

es designed to increase existing local populations of cellulose digesting m

icrobes. By increasing digesting microbe populations naturally,

Bio-Mulch accelerates cellular structure break dow

n in stubble, stalks, cobs, roots and other organic debris.

Bio-Mulch is the an

swer to no-till and m

inim

um-till problem

s:

Bio-Mulch m

inim

izes crop residue build-up improving the

efficacy of these tillage methods.

• Reduced crop residue lessen

s the risk of nutrient tie up, wh

ich is im

portant to the growing crop.

• Less residue im

proves herbicide activity.

• Reduced crop residue perm

its better seed germin

ation leading to optim

um plant population and h

igher yields.

• Less crop residue allow

s soils to warm

and dry earlier, en

hancing seed-bed preparation and earlier planting.

• Bio-Mulch leaves just the right am

ount of crop residue on the soil surface for effective protection again

st water and w

ind erosion.

Science-Driven NutritionSM

OC

T

1NO

V

2DE

C

3JA

N

4FE

B

5MA

R

6AP

R

7MAY

8

56

The Issue:

Prior to the widespread adoption of

reduced tillage practices, crop residue was

turned under to accelerate decomposition

and availability of nutrients for next year’s crop. N

ow m

uch of the residue rem

ains on top of the soil increasing the decom

position time and in essence

delaying the availability of the nutrients locked-up in the residue. The m

ove tow

ards higher plant populations has only com

pounded the residue issue and created logistical, planting and in som

e cases germ

ination issues for more and

more farm

ers. In addition, genetic insect resistance built into corn varieties has increased decom

position time. C

orn root balls below

the surface are also more

durable. While the debris from

reduced tillage does help conserve topsoil and m

oisture, there are limits to the benefits.

Sometim

es negative consequences occur. R

esidue may hold in too m

uch moisture,

especially in advance of an unusually w

et spring. Residue can also harbor m

ore

pathogens and over-wintering insects that

are difficult to reach with pesticides and

may survive to attack the spring seedlings.

University agronom

ist’s caution against m

anually removing too m

uch stover after harvest because of long-term

“adverse consequences to the soil’s level of organic m

atter or physical and chemical

properties and to successive crop yields.” (See “R

emoving C

rop Residue R

emoves

Nutrients,” U

niversity of Illinois Septem

ber 2010.)

Striking the right balance is the key to m

anaging crop residue, maxim

izing nutrient cycling and availability and m

aximizing yields year over year.

Bio-Mulch

™ is the answer to residue

managem

ent and plant issues.

The Solution - B

io-Mulch:

Bio-Mulch should be applied at a rate

of 1-2 quarts per acre. For application convenience, Bio-M

ulch can be applied w

ith additional nitrogen. Bio-Mulch is

recomm

ended for any field situation w

here crop residue managem

ent is needed. Bio-M

ulch can also be used to accelerate the breakdow

n of cover crops after burn-dow

n or applied with discing.

Bio-Mulch can be applied in the spring

pre-plant during field prep-work and

when spreading ground fertilizers.

If applying during the spring, avoid application 2-3 w

eeks before or after a pre-em

ergent herbicide application. Bio-M

ulch may reduce the persistence and

/or perform

ance of pre-emergence herbicides.

Bio-Mulch can also be applied at or

imm

ediately after harvest to encourage crop residue breakdow

n. Shredding, chopping, discing or other m

echanical m

ethods used to reduce crop residue piece size and incorporate into the soil w

ill help accelerate the crop cycling process and im

prove the performance

of Bio-Mulch.

Agro

-K C

orp

oratio

n

8030 Main S

treet, N.E

. M

inneapolis, MN

55432-1844 U.S

.A.

(800) 328-2418 • (763) 780-4116 w

ww

.agro-k.com

57

Symbooster® 10x


Item# 583

Directions for Commercial Use:Ground apply Symbooster 10X at a rate of 1/10 gallon per acre (1 liter per hectare). Symbooster 10X can be ground applied or metered through irrigation. If ground applying, ensure that Symbooster 10X is incorporated into the soil immediately after application, either mechanically or with sufficient water to wet soil to a depth of 1 inch. Symbooster 10X can be mixed with most fertilizers, pesticides and sterilants. A compatibility check is recommended. Do not mix Symbooster 10X with pre-emergent herbicides. Symbooster 10X is intended to supplement and enhance a full ground fertility program as recommended in accordance with a reliable soil analysis. If you have any questions regarding mixing or application rates contact your Agro-K dealer before using this product.

WARNING: The application of fertilizing materials containing molybdenum (Mo) may result in forage crops containing levels of molybdenum (Mo) which are toxic to ruminant animals.






SHAKE WELL BEFORE USE WARNING KEEP OUT OF REACH OF CHILDREN

Derived from Cobalt Carbonate, Manganese Sulfate, Sodium Molybdate,

Zinc Sulfate

Guaranteed Analysis:

Cobalt (Co) 0.12%Manganese (Mn) 0.40%

Molybdenum (Mo) 0.006% Zinc (Zn) 0.25%


o Net Wgt. 10 lbs. /1 gal Net Wgt. 4.54kg /3.78L

o Net Wgt. 25 lbs. /2.5 gal Net Wgt. 11.34kg /9.46L


59

Agro-K

Corp

oration 8030 Main S

treet, NE

Minneap

olis, MN

55432 Pho

ne: 763-780-4116 T

oll Free: 800-328-2418 Fax: 763-780-4316 w

ww

.agro-k.com info@

agro-k.com

Symbooster

® is a biological and m

icronutrient

based liquid fertilizer design

ed to promote

root growth

and soil fu

nction

. A h

ealthy

diverse m

icrobial popu

lation in

the root zon

e is im

portan

t to encou

rage and m

aximize

root developmen

t, health

and efficien

cy. Sym

booster simu

ltaneou

sly increases root

growth

, root activity, and existin

g microbial

popu

lations. T

his resu

lts in a h

ealthier root

zone en

vironm

ent th

at maxim

izes nutrient

availability for developmen

t of root systems.

Gettin

g germin

ating seed

s off to a quick start

and developin

g a strong root system

early is key to stron

g emergen

ce, leaf developmen

t an

d ultim

ately – yield! Symbooster en

courages

root growth

, leadin

g to increased root m

ass w

ith h

ealthier m

ore fun

ctional roots th

at can

feed more effectively. B

y maxim

izing root

developmen

t and soil nutrien

t availability, Sym

booster help

s get the m

ost out of your

fertilizer dollar.

Gu

ara

nte

ed A

nalysis

Cob

alt (Co) 0.12%

Manganese (M

n) 0.40%

Zinc (Z

n) 0.25%

Derive

d Fro

m

Cobalt C

arbonate, Manganese S

ulfate and Zinc Sulfate

Ava

ilab

ility

1 and 2.5 gallon

Dire

ctio

ns F

or U

se

Ground apply S

ymbooster 10X at a rate of 12-24 oz per acre.

Sym

booster 10X can be ground applied or metered through irrigation.

If ground applying, ensure that Sym

booster 10X is incorporated into the soil im

mediately after application, either m

echanically or w

ith sufficient water to w

et soil to a depth of 1 inch. Sym

booster 10X can be m

ixed with m

ost fertilizers, pesticides and sterilants. A

compatibility check is recom

mended. S

ymbooster 10X is intended

to supplement and enhance a full ground fertility program

as recom

mended in accordance w

ith a reliable soil analysis. If you have any questions regarding m

ixing or application rates contact your A

gro-K dealer before using this product.

fe

rt

il

iz

er

t

ec

h

sh

ee

t

sym

booste

r® 10

x

fo

lia

r n

ut

rie

nt

s

Science-Driven N

utritionSM

60

suggeste

d u

ses

fe

rt

il

iz

er

t

ec

h

sh

ee

t

Agro-K

Corp

oration 8030 Main S

treet, NE

Minneap

olis, MN

55432 Pho

ne: 763-780-4116 T

oll Free: 800-328-2418 Fax: 763-780-4316 w

ww

.agro-k.com info@

agro-k.com

Tom

ato

es, P

ep

pers, C

ucu

mb

ers

Soil: ap

ply 12-24 oz p

er acre pre-p

lant d

uring soil prep

aration or through the d

rip

tape. Follow

up ap

plications of 6

-8 oz/acre can b

e repeated

through the drip

tap

e every 30 days as need

ed.

Lettu

ce, S

pin

ach

an

d O

ther

Leafy V

egeta

ble

s as w

ell a

s B

roccoli, C

au

liflow

er a

nd

Oth

er

Bra

ssica V

arie

ties

Soil: ap

ply 12-16 oz p

er acre pre-p

lant d

uring soil prep

aration or through the d

rip

tape. Follow

up ap

plications of 6

-8 oz/acre can b

e repeated

through the drip

tap

e every 30 days as need

ed.

Corn

, Bean

s an

d P

eas

Soil: ap

ply 12-16 oz/acre w

ith liquid

starter fertilizer. A

pp

lications can also b

e mad

e in comb

ination with sid

e dress,

water run o

r pivot ap

plications at the

same rate.

Alfa

lfa, H

ay an

d G

rasse

s O

n established

stands, in early sp

ring, b

roadcast ap

ply 12-16 oz/acre p

er acre to em

erging and/o

r directly to soil

with o

r without fertilizer. R

epeat w

ith ap

plications at after each cutting to

encourage maxim

um g

rowth.

Wh

eat

Ap

ply 12-16 oz/acre at p

lanting with

starter fertilizer.

Pota

toes, O

nio

ns a

nd

Oth

er

Vegeta

ble

Root, B

ulb

or

Tub

er C

rop

s S

oil: Ap

ply 12-24 oz/acre. A

pp

ly during

soil prep

aration time o

r at planting.

Stra

wb

errie

s S

oil: app

ly 12-24 oz per acre p

re-plant

during soil p

reparation o

r through the drip

tap

e. Follow up

app

lications of 6-8 oz/

acre can be rep

eated through the d

rip

tape every 30 d

ays as needed

.

61

Symspray® 20xAgro-K Corporation 8030 Main Street, N.E. Minneapolis, MN 55432-1844 U.S.A. (800) 328-2418 • (763) 780-4116 www.agro-k.com

Item# 591

Directions for Commercial Use:Symspray 20X is a post-emergent foliar spray. Apply 6.5 oz to 3 pints per acre with sufficient water for thorough coverage. Symspray 20X can also be diluted with other liquid fertilizers. A compatibility check is strongly recommended before tank mixing. For best results, spray in early morning or late afternoon. Do not apply during the “sunlight” hours when air temperature is above 85°F. Foliar fertilization is intended to supplement standard ground fertility programs and will not by itself provide all nutrients normally required by agricultural crops. If you have any questions regarding mixing or application rates contact your Agro-K dealer before using this product.






SHAKE WELL BEFORE USE WARning KEEP OUT OF REACH OF CHiLDREn

Derived from Cobalt Carbonate, Manganese Sulfate, Zinc Sulfate, Ascophyllum Nodosum

guaranteed Analysis:Cobalt (Co) 0.17%�

Manganese (Mn) 1.50%�Zinc (Zn) 0.70%�

Net Wgt. 10 lbs. /1 gal Net Wgt. 4.5 kg / 3.78L Net Wgt. 25 lbs. /2.5 gal Net Wgt. 11.3 kg / 9.46L



63

Agro-K

Corp

oration 8030 Main S

treet, NE

Minneap

olis, MN

55432 Pho

ne: 763-780-4116 T

oll Free: 800-328-2418 Fax: 763-780-4316 w

ww

.agro-k.com info@

agro-k.com

Symspray

® is a stabilized seaweed and

micronutrient foliar spray solution. Sym

spray

contains a variety of natural plant growth

promoting com

pounds, which aid plant

growth, nutrient translocation and root

development. Sym

spray, when used at

appropriate timings can im

pact various plant

growth stages, such as

• More uniform

bud-break

• Improved flow

ering

• Increased fruit set

• Increased fruit retention

• Increased fruit size

• Enhanced fruit m

aturation

• Improved tolerance to heat stress

Symspray has distinct differences from

other seaweed or kelp based products. F

irst,

Symspray

® is a “stabilized” seaweed extract

solution. The natural com

pounds found

in seaweeds breakdow

n relatively quickly.

Agro-K

has a unique stabilizing process,

which guarantees consistent perform

ance.

Second, Agro-K

uses Ascophylluym

Nodosom

as its base seaweed source but also uses other

varieties from various locations w

orldwide

and blends them to achieve higher natural

compound levels and better product

performance. T

hird, Symspray

® is fortified

with additional zinc, m

anganese and cobalt.

Guara

nte

ed A

nalysis

Cob

alt (Co) 0.17%

Manganese (M

n) 1.50%

Zinc (Z

n) 0.70%

Derive

d F

rom

Cob

alt Carb

onate, Manganese S

ulfate,

Zinc S

ulfate, Ascop

hyllum N

odosum

Ava

ilability

1 and 2.5 gallon

Dire

ctio

ns F

or U

se

Sym

spray 20X is a post-em

ergent foliar spray. Apply 6.5 oz. to

1 quarts per acre with sufficient w

ater for thorough coverage.

Sym

spray 20X can also be diluted w

ith other liquid fertilizers. A

compatibility check is strongly recom

mended

before tank mixing.

For best results, spray in early morning or late afternoon. D

o not

apply during the “sunlight” hours when air tem

perature is above

85°F. Foliar fertilization is intended to supplem

ent standard ground

fertility programs and w

ill not by itself provide all nutrients normally

required by agricultural crops. If you have any questions regarding

mixing or application rates contact your A

gro-K dealer before using

this product.

Sym

spra

y®2

0x

fe

rt

il

iz

er

t

ec

h

Sh

ee

t

fo

lia

r n

ut

rie

nt

S

Science-Driven N

utritionSM

64

Tom

ato

es, P

ep

pers, C

ucu

mb

ers

Ap

ply 6 to

10 oz. p

er acre per

app

lication. A

pp

ly the first app

lication 7

days after transp

lanting, thinning

or at

second

true leaf stage. A

pp

ly a second

ap

plicatio

n at blo

om

. Sub

sequent

app

lications at 4-6 o

z/ac can be m

ade

throug

hout the seaso

n for fresh p

ick varieties to

maxim

ize fruit set, size and

maturatio

n throug

h the final harvest.

Lettu

ce, S

pin

ach

an

d O

ther

Leafy V

egeta

ble

s as w

ell a

s B

roccoli, C

au

liflow

er a

nd

O

ther B

rassic

a V

arie

ties

Ap

ply 6-10 oz p

er acre. Ap

ply the first

app

lication 7 days after transp

lanting, thinning, or at second

true leaf stage. A

pp

ly one or two sub

sequent ap

plications

at 10 to 14 day intervals. D

o not app

ly im

med

iately prior to extrem

e heat.

Corn

, Bean

s an

d P

eas

Ap

ply 8-10 o

z per acre. A

pp

ly fourth to

fifth leaf.

Stra

wb

errie

sA

pp

ly 6-10 oz p

er acre. Ap

ply the first

app

lication 7-10 d

ays after transplanting

. R

eapp

ly at 7-14 day intervals thro

ugho

ut the seaso

n.

Wh

eat, B

arle

y an

d O

ther

Gra

in C

rop

sA

pp

ly 6-10 oz/per acre at first flag leaf or

pre-tillering, to encourage b

etter seed set.

Alfa

lfa a

nd

Hay C

rop

sA

pp

ly 1-2 pts/ac shortly after each cutting

to encourage faster re-growth, higher

nutrient value and increased

tonnage. A

void ap

plications im

med

iately pre-b

loom

or during b

loom on p

roduction field

s.

Alfa

lfa S

eed

Ap

ply 10-16 oz im

med

iately pre-b

loom

or with p

re-bee sp

rays to encourage increased

flowering, b

loom uniform

ity and

pollination.

Pota

toes, O

nio

ns a

nd

Oth

er

Vegeta

ble

Root, B

ulb

or

Tub

er C

rop

sA

pp

ly 6-10 oz p

er acre. Ap

ply at tub

er or

bulb

initiation if larg

e bulb

s or tub

ers are d

esired. A

pp

ly second

app

lication aro

und

go

lf ball size tub

er or b

ulb.

Alm

on

ds, W

aln

uts a

nd

O

ther N

ut C

rop

sA

pply 24-36 oz per acre prior to bud break to encourage uniform

break. Apply 6-10

oz with first fungicide application or pre-

bloom. A

pply a subsequent at petal fall.

Plu

ms, P

each

es, C

herrie

s an

d O

ther S

ton

e F

ruits

Ap

ply 12-16 o

z per acre. A

pp

ly first ap

plicatio

n at first blo

om

. Ap

ply

subseq

uent app

lications at m

id-b

loo

m

and at p

etal fall or early cell d

ivision.

Ap

ple

s, Pears

an

d O

ther P

om

e F

ruits

Ap

ply 12-16 o

z per acre. A

pp

ly first ap

plicatio

n at pink. A

pp

ly subseq

uent ap

plicatio

ns at blo

om

and at p

etal fall or

early cell divisio

n.

Citru

s an

d A

vocad

os

Ap

ply 8-12 o

z/ac at blo

om

. Ap

ply

subseq

uent app

lication at p

etal fall or

early cell divisio

n.

Gra

pes

Ap

ply 36 o

z per acre p

re bud

break to

encourag

e uniform

bud

break. A

pp

ly 8 o

z pre-b

loo

m. A

pp

ly 36 oz at 1-2 inch

flow

er clusters.

Rasp

berrie

s, Bla

ckb

errie

s an

d

Oth

er C

an

eb

errie

sA

pp

ly 8-12 oz p

er acre. Ap

ply first

app

lication p

re-blo

om

. Ap

ply sub

sequent

app

lications at m

id-b

loo

m and

po

st b

loo

m.

Agro-K

Corp

oration 8030 Main S

treet, NE

Minneap

olis, MN

55432 Pho

ne: 763-780-4116 T

oll Free: 800-328-2418 Fax: 763-780-4316 w

ww

.agro-k.com info@

agro-k.com

Suggeste

d u

ses

fe

rt

il

iz

er

t

ec

h

Sh

ee

t

65

Super Symcoat®

Seed Applied Specialty Nutrient System


Item# 587

Instructions For Use:Apply Super Symcoat as a seed coating prior to planting to assist seed germination and hasten crop establishment. Super Symcoat improves bio-available micronutrient supply during the critical period of stand establishment. Super Symcoat may be used on a wide variety of agricultural field crops including small grains, soybeans, dry edible beans, peas and lentals, canola, grain and forage sorghums, forage millets, and corn.

APPLICATION INSTRUCTIONS:Use with fungicides and insecticides: Super Symcoat can be tank-mixed with most seed protection products provided such products are miscible in water and labeled for slurry application directly on seed. Read all product labels carefully and check compatibility by mixing a small amount of each product together to confirm suitability of slurry application prior to application.

Use with biological products: Super Symcoat CAN BE sequentially or simultaneously applied with most biological products when mixed in separate mix tanks. Direct tank-mixing Super Symcoat in the same tank with biological products such as legume inoculants, beneficial fungus, and other live micro organisms is NOT RECOMMENDED as nutrients contained in Super Symcoat can reduce the viability of the micro-organisms with directly mixed slurries.

Read biological product labels carefully and consult with biological product manufacturers for specific use instruction of those products.

WarnIng: DO NOT USE TREATED SEED fOR fOOD, fEED OR Oil pURpOSES.

This product contains molybdenum and should be used only in accordance with directions. improper use may result in injury to crops. Avoid freezing.

application rate: General Use Rate: 2 to 6 oz per 100 lbs of seed. Shake well before use.

application Methods and recommendations: Super Symcoat is suitable for application with commercial and on-farm application equipment designed for seed applied products. Coverage on the seed and accurate rates of application are critical success factors for the use of Super Symcoat and all seed applied products. follow these steps to insure the best performance possible.1. Conduct compatibility check prior to mixing and applying seed slurry treatments. 2. Calibrate application equipment by determining the rate of seed flow and setting the slurry

pump to deliver the intended rate of application. 3. Utilize clean water as a diluent to increase rate of slurry application and improve coverage

when needed. 4. Utilize secondary tanks to mix biological products, separating them from tank-mixing with

Super Symcoat and pesticide products such as fungicides and insecticides. 5. iMpORTANT: Always calibrate seeding machinery following seed treatment applications as

seed flow and handling may be altered from that of un-treated seed.

Warranty 1.-The manufacturer guarantees and warrants that the content and the total net weight are as stated within lawful limits.

2.-liability of Agro-K Corporation under this warranty or otherwise shall be limited to refund of the purchase price and such refund is expressly agreed by the buyer to be the exclusive remedy.

agro-K Corporation makes no other expressed or implied guarantee, warranty or representation, including warranties of merchantability and fitness for a purpose. agro-K Corporation shall not be liable for direct consequential or incidental damages. No modifications of this warranty and the disclaimers herein are authorized or valid unless expressed in writing and signed by Agro-K Corporation.

Derived from Cobalt Carbonate, Copper Sulfate, Manganese Sulfate,

Ammonium Molybdate and Zinc Carbonate

guaranteed analysis:Cobalt (Co) 0.05%Copper (Cu) 0.25%

Manganese (Mn) 5.5%Molybdenum (Mo) 0.05%

Zinc (Zn) 5.25%

o Net Wgt. 1 gal. / 11.30 lbs.o Net Wgt. 2.5 gal. / 28.25 lbs. o Net Wgt. 250 gal. / 2825 lbs.

information regarding the contents and levels of metals in this product




67

Agro-K

Corp

oration 8030 Main S

treet, NE

Minneap

olis, MN

55432 Pho

ne: 763-780-4116 T

oll Free: 800-328-2418 Fax: 763-780-4316 w

ww

.agro-k.com info@

agro-k.com

Super Symcoat is a seed coating for w

heat, barley,

lupins, canola, peas and other row crops. Super

Symcoat prom

otes strong seed germination and

supplies an initial source of important m

icronutrients

needed for proper plant development. Super Sym

coat

contains:

• Natural germ

ination enhancers

• Uniquely form

ulated, Dextro-Lac®

,

bio-available micronutrients.

Super Symcoat is specifically designed:

• For A

ustralian grain growing regions w

here

soils are generally micronutrient deficient

• To correct micronutrient deficiencies at

germination to im

prove seedling vigour

• To promote rapid germ

ination, strong root

development and balanced plant grow

th

• Increase yield and quality.

Dextro-L

ac®

& B

io-Availability

Agro-K

’s proprietary

“Dextro-Lac®

”

process couples zinc,

manganese and copper

to complex carbohydrate

molecules (sugars based

compounds), w

hich can more easily be absorbed

by the treated seed. The D

extro-Lac manufacturing

process involves a series of processes including a

modified bio-ferm

entation. During the reaction

processes the elemental nutrient (Z

n, Mn &

Cu) is

linked to a polysaccharide molecule creating a sugar-

based nutrient. The term

Dextro-Lac is used

to convey this process and resulting product.

The D

extro-Lac® process is responsible for the unique

bio-available properties of Super Symcoat. O

ver 90% of

nutrients applied in this sugar-based form can actually

be utilized by the plant. Micronutrients in a variety of

other forms such as oxides generally have less plant

availability and are therefore less effective than Super

Symcoat. Product perform

ance depends on high levels

of available micronutrients not on high guaranteed

claims on a label.

fe

rt

il

iz

er

t

ec

h

sh

ee

t

super s

ymcoat

®

Nu

tr

ieN

t s

ee

d c

oat

iNg

Dextro-Lac Process

Reaction

Agen

t

Initial R

eaction

Carb

on S

ources

for Su

gar Base

Mod

ified

Ferm

entation

Process

Prop

rietary Biological

Con

stituen

ts & C

onverters

Dextro-L

ac M

icronu

trient

Raw

Metal S

ource

Science-Driven N

utritionSM

biomax - meherrin ag & chemical · 2015. 8. 13. · biomax can be ground applied or injected...

Documents