biographical resume dr. rahmat a. shoureshi interim ... · biographical resume dr. rahmat a....
TRANSCRIPT
BIOGRAPHICAL RESUME
Dr. Rahmat A. Shoureshi
Interim President
Provost and Vice President for Academic Affairs
New York Institute of Technology
Education:
Ph.D. ME Massachusetts Institute of Technology 1981
M.S. ME Massachusetts Institute of Technology 1978
B.S. ME Sharif University of Technology 1975
Table of Contents
Highlights of Academic Administration & Recent Accomplishments ii
I. Professional Positions 1
a. Academic Positions
b. External Positions
II. Honors and Awards 3
III. Society Memberships & Professional Activities 4
IV. Keynote and Plenary Speeches 7
V. Chairship & Organization of Global Initiatives 8
VI. Short Courses and Seminars 9
VII. Educational and Research Interests 18
VIII. Patents 18
IX. Research Proposals under Review 18
X. Awarded Research Grants 19
XI. Books and Book Chapters 23
XII. Refereed Publications 25
XIII. Academic Activities 40
XIV. Visiting Scholars, Post Docs, Students Supervision 42
XV. External Activities 48
ii
1
I. Professional Positions
A. Academic Positions
17 – Present Interim President, New York Institute of Technology (NYIT), New York
11 – 2016 Provost and Vice President for Academic Affairs, New York Institute of
Technology (NYIT), New York
03 – 2011 Dean, School of Engineering & Computer Science, University of Denver
01 – 2003 Associate Vice President and Director of Office of Technology Transfer,
Colorado School of Mines (CSM)
01 – 2003 Chair, CSM Bioengineering and Life Sciences (BELS) Program
94 - 2003 G.A. Dobelman Endowed Chair Professor of Engineering, Engineering
Division, Colorado School of Mines (CSM), Golden, Colorado.
98- 2003 Director of NSF Industry/University Cooperative Research Center for
Intelligent Biomedical Devices and Musculoskeletal Systems (IBDMS),
CSM, Golden, Colorado.
94 - 2003 Director of the Center for Automation, Robotics and Distributed
Intelligence (CARDI), CSM, Golden, Colorado
93 - 2003 Director of NSF Power Systems Engineering Research Center (PSERC),
Purdue University and Colorado School of Mines (CSM), Golden,
Colorado.
94 - 1997 Founding Chairman of Engineering Systems Graduate Program, Colorado
School of Mines (CSM), Golden, Colorado.
92 - 1994 Chairman of Systems, Measurement and Control Area, School of
Mechanical Engineering, Purdue University, West Lafayette, Indiana.
91 - 1994 Professor, School of Mechanical Engineering, Purdue University, West
Lafayette, Indiana.
90 - 1992 Founding Chairman of the Manufacturing and Materials Processing Area,
School of Mechanical Engineering, Purdue University, West Lafayette,
Indiana.
87 - 1991 Associate Professor, School of Mechanical Engineering, Purdue
University, West Lafayette. Taught graduate and undergraduate courses
and performed research in Systems, Measurement and Control area.
Pioneered Mechatronics, Intelligent Buildings and Active Noise and
Vibration Control research areas.
2
83 - 1987 Assistant Professor, School of Mechanical Engineering, Purdue
University, West Lafayette, Indiana. Developed a new course and
laboratory on Microprocessor Control, and a Robotics research laboratory.
81 -1983 Assistant Professor of Mechanical Engineering, Wayne State University,
Detroit, Michigan. Developed a new course and a new laboratory entitled:
"Microprocessors for Measurement and Control". Established a new M.S.
degree program between Ford Motor Company and Wayne State
University.
79 - 1981 Instructor and Teaching Assistant, Design and Control Division of the
Mechanical Engineering Department, Massachusetts Institute of
Technology (MIT), Cambridge, Massachusetts.
1991 Sabbatical Leave:
Jet Propulsion Laboratory, Cal Tech, Pasadena, CA, Machine Intelligence
Group - Researched on "Intelligent Control Systems for Space Vehicles."
Naval Postgraduate School, Monterey, CA, Autonomous Underwater
Vehicle Group - Researched on "Neuro-Diagnostics for Autonomous
Vehicles."
Cooper Engineered Products, Aubrun, IN, Advanced Product
Development Group, Developed a state-of-the-art CAD System for
"Optimal Design of Vehicle Mounting System."
B. External Positions
00 – Present Taskforce Member, New York Mayor initiative on Tech-Talent Pipeline
00 – Present Board Member, Tactile Navigation Tools, New York
00 – Present Board Member, Innovative Technology Frontiers, Colorado
04 – 2011 Board Member, C-TEK, Venture Group
03 – 2011 Board Member, Colorado Bioscience Association (CBSA)
06 – 2011 Vice Chair of the Board, Colorado Nanotechnology Association (CNA)
08 – 2011 Board Member, Colorado Software and Internet Association (CSIA)
09 – 2011 Board Member, MindSport, Regional Organization for the US FIRST
06 – 2011 Board Member, Denver Venture High School
3
03 – 2011 Member, Executive Committee, DU Office of Technology Transfer
00 – 2011 Chair of the USA-Europe Task Force on Bio-Inspired Design, Sensor
Technologies and Smart Structures, a joint National Science Foundation
(NSF), Air Force Office of Scientific Research (AFOSR) and European
Science Foundation (ESF) Initiative.
04 – 2007 Member, Colorado Governor’s Science & Technology Council
01 – 2003 Administrator, Colorado Commission for Higher Education (CCHE) Seed
Grant Program in Biosciences.
99 - 2004 Chairman of the Board and President, Colorado Alliance for
Bioengineering (CAB), an Integrated Research and Education Effort among six institutions: CU Health Sciences Center, CU-Boulder, CU-
Denver, Colorado State University, Colorado School of Mines and the University of Denver.
96 - 2003 Member of Board of Directors, Rocky Mountain Musculoskeletal
Research Laboratories (RMMRL), Denver, Colorado.
87 - 2000 Chief Technical Advisor Cooper Engineered Products.
76 - 1977 Combustion Engineering Co., Windsor, Connecticut, Reactor Design
Division, Responsible for modeling, simulation and experimental
verification of fuel elements in nuclear reactor core.
74 - 1976 Design Engineer and Project Manager, R&D Dept., Atmosphere
Manufacturing, Co., Tehran, Iran, responsible for the design and
development of a new chiller production line.
II. Honors and Awards
Keynote Speaker, 2017 DINAME, Sao Sebastiao, SP, Brazil, March 2017
NAFSA Award for Leadership in a Global University, 2016
Year of Turkey Award, Turkish Consulate, for establishing academic partnerships with
universities in Turkey, 2013
Commencement Speaker, University of Denver, 2010
Leadership Award, ASME Dynamic Systems & Control Division, 2006
American Automatic Control Council Eckman Award, 1987
Fellow, American Society of Mechanical Engineers (ASME), 1989
4
General Chair, 2011 American Control Conference, San Francisco
General Chair, 2009 ASME Dynamic Systems and Control Conference, Los Angeles
General Chair, 2004 Japan-USA Symposium on Flexible Automation, Denver
Member, European Academy of Sciences, 2005
Member of Colorado Governor’s Science and Technology Council
Selected as the 2000 Southwest Mechanics Lecturer of the Year, lectured at six
universities
Recipient of the SAE Award for Excellence in Oral Presentation at the 1989 SAE Noise
& Vibration Conference & Exposition
Named as a Symbol of "Academic Excellence", by Fort Wayne Journal Gazette, June 9,
1985
February 1982 Selected as best teaching faculty member of Mechanical Engineering
Department at Wayne State University
February 1981, Outstanding Graduate Student of Mechanical Engineering Department at
M.I.T. (Tuition Award)
January 1976 to January 1979, Recipient of Sharif University of Technology scholarship
1971 to 1975, Among top five students of Mechanical Engineering Department at Sharif
University of Technology, Iran (Four years of Tuition Award).
III. Society Memberships and Professional Activities
Fellow, American Society of Mechanical Engineers – ASME
Member, CAO, American Council on Education – ACE
Senior Member, Institute of Electrical and Electronic Engineers - IEEE
Member, Society of Automotive Engineers - SAE
Member, American Society of Engineering Education - ASEE
Member, Biomedical Engineering Society – BMES
General Chair, ASME Dynamic Systems and Control Conference, October 12-14, 2009,
Hollywood, California
5
General Chair, 2011 American Control Conference, June 2011, San Francisco, California
Director and ASME Representative on American Automatic Control Council (2000-
2004)
Member of International Editorial Board, Smart Structures and Systems, an International
Journal of Mechatronics, Sensors, Monitoring, Control, Diagnosis, & Measurements
Past Member of ASME-DSC Executive Committee
Founding chairman of the ASME new initiative on Engineering Systems (1995-1999)
Vice-President, International Federation of Intelligent Control (1994-1997)
Member of Technical Committee, Smart Structures Technologies and Earthquake
Engineering Conference, Osaka, Japan, 2003
Member of Technical Committee, 2004, Earthquake Engineering Conference, Nanjing,
China
Selected as one of the eight IEEE international member team to write the “Advanced
Control Systems” self-study book
Member of Editorial Board, Smart Structures Journal, Prentice Hall (2003-Present)
Member of Editorial Board, Control Engineering Practice, Journal of International
Federation of Automatic Control (1991-1994).
Member of Editorial Board, Scientia Iranica Journal (1998-Present)
General Chair, 2004 Japan-USA Symposium on Flexible Automation, Denver, Colorado.
Chair, Local Arrangements, 2003 American Control Conference, Denver, Colorado.
Co-Chair, 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan.
Member of Program Committee 1996-present, ANNIE conference.
Member of Executive Committee, 2000 Japan-USA Symposium.
Organizer and session chairman at the American Control Conferences (ACC) and ASME-
IMECE meetings.
Associate Editor, ASME Journal of Dynamic Systems, Measurement and Control
(1986-1993).
6
Member of the NSF Select Panel to evaluate "Presidential Faculty Fellows," February,
1992.
Summer 1992, NSF Invited Speaker, Joint USA-Japan-Italy Workshop on Intelligent
Structures, Sorrento, Italy, July 1992.
Summer 1990, NSF Invited Speaker, Joint USA-Japan-Taiwan Workshop on Intelligent
Structures, Taipai, Taiwan, July 1990.
Member of the NSF Select Panel on "Research Goals and Priorities in Neuro-Control
Systems," NSF-McDonnell Douglas Workshop, October 1990.
Member of the NSF Select Panel to Review "Engineering Initiation Award" proposals,
1987, 1989.
Member of the NSF Select Panel on "Research Goals and Priorities in System Dynamics
and Control," NSF-ASME Workshop, June 1986.
Member of the "Select Panel on Research Goals and Priorities on Intelligent Buildings,"
NSF Workshop, March 1986.
Member of the Select Panel on "Research Goals and Priorities in Thermal Systems,"
NSF-ASME Workshop, April 1984.
Associate Editor, Applied Mechanics Review (1984-1987).
Member of Program Committee, "International Conference on Intelligent Manufacturing
'95 (ICIM '95), Wuhan, P.R. China, June 1995.
Member of Program Committee, "International Conference on Intelligent Structures," Los
Angeles, CA, August 1994.
Member of Program Advisory Board, "Industrial Fuzzy Control and Intelligent Systems,"
College Station, TX, December 1993.
Member of the NSF Special Task Force on "Intelligent Materials Systems,"
Williamsburg, VA, November 1993.
Organizer and Chairman of Active Noise and Vibration Control Technical Panel of the
Dynamic Systems and Control Division of ASME (1994-1997).
Member of Planning Committee for the IFAC Symposium on "Advances in Control
Education," Boston, June 1991.
1987 ASME Winter Annual Meeting Program Chairman, Dynamic Systems,
Measurement and Control Division.
7
Organizer and Chairman of American Control Conference (ACC) Special Session on
"Intelligent Control in Practice," June 1992.
Chairman of "Neural Network Application to Control Problems," 13th IMACS World
Congress, Dublin, Ireland, July 1991.
Chairman of "Symposium on Intelligent Systems in Control and Robotics," 13th IMACS
World Congress, Dublin, Ireland, July 1991.
Organizer and Chairman of ACC Special Session on "Mystique of Intelligent Control
Systems," American Control Conference, May 1990.
Organizer and Chairman of Expert Systems and Artificial Intelligence Technical Panel of
the Dynamic Systems and Control Division of ASME (1985-1993).
Chairman of "Expert Systems and Pattern Recognition," session at the Japan-USA
Symposium on Flexible Automation, Osaka, Japan, July 1986.
Organizer and Chairman of "Modeling Dynamics and Failure Detection for Thermofluid
Processes and Systems," sessions at the American Control Conference (1984, 1985 and
1986).
Chairman of "Process Control" session at IFAC/IFORS Conference, sponsored by the
Chinese Academy of Sciences, Beijing, People Republic of China, August 1985.
Chairman of Energy Systems and Control Panel of the Dynamic Systems and Control
Division of ASME (1983-1986).
Member of the Program Committee, UPCAEDM Conference (University Programs on
Computer Aided Engineering, Design, and Manufacturing) Purdue University, July 1985.
Member of the Select Panel for the NSF Workshop on "Tactile Stimulators" at Indiana
University, May 1985.
IV. Keynote and Plenary Speeches
Plenary Speaker, 14th
International Symposium on Dynamic Problems in Mechanics,
March 13-18, 2011, Sao Paulo, Brazil
Plenary Speaker, 3rd
International Conference & Exhibition on Unmanned Aerial
Vehicles, June 21-23, 2010, Dubai
Plenary Speaker, European Science Foundation Conference on Smart Sensors for
Structural Technology (S3T), April 7-10, 2010, Porto, Portugal
Plenary Speaker, 2nd
Mediterranean Conference on Intelligent Systems and Automation,
March 23-25, 2009, Tunisia
8
Plenary Speaker, 2nd
International Summit on Nano Renewable Energy, June 21-24,
2009, Denver, Colorado
Keynote Speaker, Joint NSF and Japan Science & Technology (JST) Workshop on Future
Sensor Technologies, July 2007, Tokyo, lectured on “Bio-Inspired Autonomic Systems
for Enhanced Quality of Life.”
Keynote Speaker, 3rd
International Conference on Smart Materials and Sensor
Technologies, May 2007, Chongqing, China, lectured on “Bio-Inspired Structural
Monitoring System Architecture.”
Keynote Speaker, NATO Conference on Nano-Materials, Greece, lectured on
“Biomimetic- Based Nervous System for Civil Structures,” May 2005.
Keynote Speaker, Structural and Earthquake Engineering Conference, Nanjing, China,
lectured on “Informatics and Sensor Intelligence: Research and Curriculum Needs,”
October 2004.
Keynote Speaker, Colorado Innovation Summit, Denver, Colorado, lectured on “Re-
engineering of Engineering Education,” September 2004.
Member of the Testimonial Panel on “Impact of Nanotechnology” Colorado State Senate,
March 2004.
Keynote Speaker for “European Industry-University Center for Biomedical Engineering,”
The Queen’s University, Belfast, Northern Ireland, June 2001
November 1998, Keynote Speaker, First USA-China-Japan Symposium on
“Infrastructure Systems”
November 1996, Keynote Speaker, 1996 ANNIE Conference, St. Louis, Missouri.
Lectured on “Intelligent Control in Practice”
March 1995, Keynote Speaker, Sixth Symposium on Dynamic Problems of Mechanics,
lectured on "Towards the Development of Intelligent Structures," Minas Gerais, Brazil.
November 1993, Keynote Speaker, International Conference on Numerical Methods in Engineering," lectured on "Artificial Neural-Networks: A Step Closer to Human
Information Processing," Sao Paulo, Brazil.
June 1992, Keynote Speaker, International Conference on Applications of Mechanics,
Tehran, lectured on "Mechanical Engineering and Factory-of-the-Future."
V. Chairship and Organization of Global Initiatives
9
Chair, NSF Sponsored China Short Course Series on “Sensors, Informatics, Structural
health Monitoring and Active Structural Control”, December 12-20, 2003, Shanghai,
Harbin, and Beijing, China.
Chair, “US-Europe Workshop on Reverse Engineering of the Human Brain,” May 22-26,
2010, Dubrovnik, Croatia, sponsored by NSF/AFOSR/ESF.
Chair, “US-Europe Workshop on Biosensors, Bioactuators and Bio-Inspired Systems,”
June 15-17, 2008, Sicily, Italy, sponsored by NSF/AFOSR/ESF.
Chair, “European Science Foundation – NSF- AFOSR Workshop on Morphing
Aerospace Structures,” Nov. 6-9, 2007, St. Maxim, France.
Chair, “US-Europe Workshop on Autonomic Structures,” May 26-29, 2006, Nice,
France, sponsored by NSF/AFOSR/ONR/ESF.
Chair, “European Science Foundation – NSF Workshop on Sensor Technology and Smart
Structures,” June 26-29, 2005, Santorini, Greece
Chair, “European Science Foundation – NSF Workshop on Sensor Technology and Smart
Structures,” September 30 – October 4, 2003, Strasbourg, France
Chair and Organizer, NSF/DARPA/NIH/DOE/NASA/ARO/AFOSR/ONR Workshop on
“Future Sensor Technologies,” August 26-28, 2002, Lake Tahoe.
Chair and Organizer for “US NSF-China NSF Program on Smart Structures,” 2002-2004.
General Co-chair, 2002 Japan-USA Symposium on Flexible Automation, July 15-17,
2002, Japan.
1998 Chairman and Organizer of US-NSF and China-NNSF sponsored symposium on
“Future Research Directions in Civil Infrastructures,” a trilateral workshop between USA,
China and Japan.
1996 Chairman and Organizer of NSF-EPRI-NIST sponsored workshop on “Future
Research Directions in Intelligent Control,” Gaithersburg, Maryland, June 1996.
Chairman, CSM Academy, a committee of the CSM Distinguished Professors charged
with providing vision and long range planning for the institution (1998 – 2003).
Chairman, ASME Dynamic Systems and Control Division (1996 – 1997)
November 1993, one of the eight-member NSF Select panel on Intelligent Material
Systems and Structures, "Their role in rebuilding and enhancing the Nation's
Infrastructure".
Organizer and Chairman of NSF-EPRI Workshop on "Intelligent Control Systems,"
October 1990.
10
VI. Short Courses and Seminars
A. Short Courses
“Advanced Mechatronic Monitoring System for High Voltage Transmission Lines,”
EPRI Overhead Transmission Lines Maintenance Symposium, Charlotte, NC, May 2007.
“Sensor Informatics and Advanced Vibration Control of Civil Structures,” presented at
Third International Conference on Earthquake Engineering, Nanjing, China, October
2004.
“Informatics and Sensor Intelligence,” Short course at top three China Universities in
Shanghai, Harbin and Beijing, December 2003.
“Intelligent Monitoring System for Energized Transmission Lines,” EPRI, Charlotte,
North Carolina, December 2003.
“Active Noise and Vibration Control,” Audi and VW, November 1999.
“Intelligent Control Systems,” General Motors, March 1998.
“Fuzzy Control and its Applications to Power Systems,” Colorado School of Mines, Dec.
8, 1994
“Intelligent Control Systems,” Sao Paulo, Brazil, November 29-30, 1993.
United Nations invitee, TOKTEN project, Sharif University of Technology, Tehran, June
1992, gave short courses and seminars on the subjects of “Intelligent Control Systems,”
“Microprocessor-based Control Systems,” and “Active Noise and Vibration Control.”
Instructor of an annual five-day short course on "Principles and Applications of
Microprocessors for Measurement and Control," first week of June (1985-1989), Purdue
University.
Organizer and instructor of an annual four-day short course on "Active Noise and
Vibration Control," Ray W. Herrick Laboratories, Purdue University, 1989-1992, with
Professors R. Bernhard and J. Jones.
Organizer and instructor of an annual Engineering/Management short course on
"Introduction to Microprocessors and their Applications," April 1988, 1989, and 1990.
Organizer and instructor of a two-day short course on "Software/Hardware and
Applications of Microprocessors", Purdue University, in conjunction with the
International Institute of Refrigeration (IIR) Conference, August 1986.
Organizer and instructor of an ASME two-day short course on "Introduction to
Microprocessors and Their Applications, "November 1986, San Francisco, CA.
11
Organizer and instructor of a two-day short course on, “Embedded Microcontrollers for
System Automation,” Kodak Company, Rochester, New York, June 1985.
Organizer and instructor of a three-day short course on, “Mechatronics Design for
Thermal Systems,” Copeland Corporation, June 1986.
B. Seminars
“Advanced Technologies in Non-Destructive Monitoring and Diagnostics of Electric
Power Infrastructures,” EPRI Workshop on Transmission Lines, September 2009,
Atlanta, GA.
“Quiet Crisis: Educational Needs in STEM Areas,” May 2009, Denver Rotary Club.
“Smart Diagnostic System for Non-Invasive Corrosion Assessment in Energized Electric
Transmission & Distribution Infrastructure,” Invited speaker, EPRI Conference, August
12, 2008, Cheyenne, Wyoming.
“Bio-Inspired Autonomic Structures,” Invited speaker, CIMTEC Conference, June 11,
2008, Sicily, Italy.
“Next Generation of Engineers for the 21st
Century Technologies,” Loveland High
School, Colorado, Feb. 6, 2008.
Keynote Speaker, Joint NSF Japan Science & Technology (JST) Workshop on Future
Sensor Technologies, July 2007, Tokyo, lectured on “Bio-Inspired Autonomic Systems
for Enhanced Quality of Life.”
Keynote Speaker, 3rd
International Conference on Smart Materials and Sensor
Technologies, May 2007, Chongqing, China, lectured on “Bio-Inspired Structural
Monitoring System Architecture.”
“Autonomous Systems,” NSF Speaker, Directorate of Engineering, March 2007.
Keynote Speaker, NATO Conference on Nano-Materials, Greece, lectured on
“Biomimetic- Based Nervous System for Civil Structures,” May 2005.
Keynote Speaker, Structural and Earthquake Engineering Conference, Nanjing, China,
lectured on “Informatics and Sensor Intelligence: Research and Curriculum Needs,” October 2004.
Keynote Speaker, Colorado Innovation Summit, Denver, Colorado, lectured on “Re-
engineering of Engineering Education,” September 2004.
“Intelligent Structures and Distributed Sensors,” Osaka University, July 2004.
“Intelligent Electric Power Generation Control for Highly Varying Lands,” Oak Ridge
National Lab, January 2004.
12
“State of Nanotechnology in USA and Abroad,” Nano/Micro Technology Summit, NIST,
Boulder, May 2004.
“Bioengineering Fundamentals,” 2003 Biowest, October 2003, Denver, Colorado.
“University Technology Commercialization,” SBIR Colorado, March 2004, Denver,
Colorado.
“Assistive Technologies for Geriatrics and Disabled,” IEEE Rocky Mountain Chapter,
November 2003, Denver, Colorado.
“BioEconomy, The Role of University Bioengineering Research in State Economy,” 2002
Colorado Bio Expo, Dec. 4, Aurora, CO.
“Non-Destructive Health Assessment of Live Overhead Transmission Lines,” EPRI T&D
Symposium, May 14-17, 2002, Monterey, CA.
“Electro-Magneto-Vibration Transducers for Health Assessment of Structures and Wire
Ropes,” US-European Workshop on Smart Structures, Como, Italy, April 2002.
“Foundations for a Successful Industry/University Research Center in Bioengineering,”
Queen’s University, Northern Ireland, June 2001.
“Applied Active Noise and Vibration Control,” Colloquium Speaker, Dept. Electrical and
Computer Engineering, University of New Castle, Australia, May 2001.
“Bionic Orthopedics,” Seminar Speaker, Biomedical Engineering Institute, University of
Karlsruhe, Germany, April 2001.
“Colorado Alliance for Bioengineering,” Biotechnology Seminar series, Bio-Science
Park, Aurora, Colorado, Dec. 2000.
“Advanced Monitoring System for Electric Transmission Lines,” Electric de France R&D
Center, Claramont, France, Nov. 2000.
Lecture Series: “Analysis, Design and Implementation of Active Control Technology,”
Southwest Mechanics, various Universities and Colleges, February 2000.
“Active Noise Control for Communication Enhancement,” Bose Corporation, Jan. 2000.
“Multi-Site Biomedical and Power Centers- Lessons Learned,” NSF I/UCRC Directors
Meeting, January 1999.
“Smart Implants and Biomedical Devices,” CATI Commissioners Meeting, January 13,
1999.
13
“Active Communication and Voice Enhancement System,” Lear Corporation Technical
Center, Detroit, MI, March 16, 1999.
“Fuzzy-Based Energy Management System for Residential and Commercial Buildings,”
Dept. of Energy, Research Review Meeting, March 30, 1999.
“Advanced Technologies for Enhanced Automotive NVH,” GM Technology Center,
Warren, MI, April 27, 1999.
“Intelligent Biomedical Devices,” IBDMS Industry Advisory Board (IAB)Meeting, May
20, 1999.
“Toward the Development of Smart Substations,” Tennessee Valley Authority and
Kansas City P&L, Univ. of Wisconsin, Madison, June 27, 1999.
“Needs and Priorities in Bioengineering,” Jefferson County Economic Development
Authority, Golden, CO, July 14, 1999.
“Technological Advances in Power Engineering, “ EPRI/WAPA/Tri-State Meeting,
Golden, CO, July 21-22, 1999.
“Modeling and Design of Telemetric Patella,” Special CASI Meeting, Denver, October
4, 1999.
“Active Noise Control for Automotive Vehicles,” SAAB Engineering Center, Trollhoten,
Sweden, November 2, 1999.
“Active Technologies for Automotive NVH Enhancement,” Opel Engineering Center,
Dudenhoffen, Germany, November 30, 1999.
“Development of a Joint Curriculum in Bioengineering,” Colorado Academic Alliance in
Bioengineering, Boulder, CO, December 16, 1999.
“Smart Implants and Biomedical Devices,” CATI Commissioners Meeting, May 13,
1998.
“Active Noise and Vibration Control,” United Technologies, Research Center, Hartford,
CT, June 23, 1998.
“Fuzzy-Based Energy Management System for Residential and Commercial Buildings,”
International Photovoltaic Conference, Vienna, Austria, July 8, 1998.
“Automated Assembly Cell Using Vision Based Robot Control,” Japan-USA Symposium
on Flexible Automation, July 15, 1998.
“Remote Robotic Manipulators for Hazardous Environments,” Rocky Flats, Golden,
Colorado, July 23, 1998.
14
“Advanced Technologies for Enhanced Automotive NVH,” GM Technology Center,
Warren, MI, August 7, 1998.
“Toward the Development of Smart Substations,” Joint Tennessee Valley Authorities and
WAPA Meeting, Golden, CO, August 5, 1998.
“Needs and Priorities in Bioengineering,” CATI Meeting, Westminster, CO, August 21,
1998.
“Role of Bioengineering in CSM Curriculum,” Presentation to the CSM Board of
Trustees, Golden, Colorado, November 12, 1998.
“3-D Modeling and Design of Smart TMG,” Special NIH Meeting, Bethesda, MD,
December 8, 1998.
“Active Noise Control for Automotive Vehicles,” VW Engineering Center, Wolfshurg,
Germany, December 15, 1998.
“Development of a Joint Curriculum in Bioengineering,” Colorado Academic Alliance in
Bioengineering, Denver, CO, December 16, 1998.
"Remote Monitoring and Health Assessment of Machinery in Large Scale Manufacturing
Systems," Honda of America, Marysville, Ohio, February 12, 1997.
"Toward the Development of Intelligent Biomedical Devices," Colorado Biomedical
Association, Lakewood, CO, February 20, 1997.
"Smart Implants and Braces," NSF I/UCRC Planning Meeting, Rose Medical Center,
Denver, Colorado, Feb. 27, 1998.
"Electronic Customer/Utility Interface System," Northern Indiana Public Service
Co.(NIPSCO), Hammond, Indiana., March 5, 1997.
"Active Interior Noise Control with Applications to Trucks," NAVISTAR Corporation,
Ft. Wayne, Indiana, March 6, 1997.
"Advanced Automatic Electric Generation Control," ACEPS Industry Advisory Board
Meeting, NISPCO, Merrillville, Indiana, May 15, 1997.
"Active Vibration Control: A New Generation of Engine Mounts," Ford Motor Company,
Dearborn, Michigan, June 18, 1997.
"Development of New Vibration Control Technology," GM Advanced Vehicle
Development, Warren, Michigan, June 26, 1997.
"Development of Smart Implants," Annual Meeting of Colorado Advanced Software
Institute, Denver, Colorado, August 8, 1997.
15
"Feedforward/Feedback Active Technology with Applications to Automotive Systems,"
Chrysler Advanced Engineering, Detroit, Michigan, Sept. 18, 1997.
"Implementation of DSP-Based Active Vibration Control," VW Automotive Engineering
Wolfsburg, Germany, Sept. 29, 1997.
"Advances in Power Engineering and Substation Automation," Kansas City Power and
Light, Kansas City, Nov. 6, 1997.
“Intelligent Control In Practice,” Keynote speaker, 1996 ANNIE, Conference, St. Louis,
Missouri, November 1996.
“Intelligent Substation Monitoring System,”, WAPA’s Mead Substation, Las Vegas,
Nevada, March 13, 1996.
“Overview of Research Projects at CSM-ACEPS,” Industry Advisory Board
(IAB)Meeting, Golden, Colorado, March 28, 1996.
“Intelligent Control Systems,” General Motors Powertrain Division, Warren, Michigan,
April 9, 1996.
“Active Interior Noise Reduction for Tracks,” Navistar Corporation, Fort Wayne, Indiana,
May 1, 1996.
“Applications of Anticipatory Control for Automatic Electric Power Generation,” EPRI
Power Quality Workshop, Memphis, Tennessee, May 14, 1996.
“Hybrid Control of Cable-Stayed Bridges,” Annual meeting of ASCE, Fort Lauderdale,
Florida, May 21, 1996.
Planerary Speaker: “Overview of Intelligent Control Systems,” NSF/NIST/EPRI
Workshop on New Directions in Intelligent Systems, Gaithersburg, Maryland, June 11,
1996.
“Medical Applications of Active Technology,” Hill Rom Corporation, Columbia, South
Carolina, June 14, 1996.
“Applied Intelligent Control,” Panel Speaker, IFAC World Congress, San Francisco,
California, July 3, 1996.
Advance in Automotive Active Control Technology,” Continental International, Hanover,
Germany, August 13, 1996.
“Intelligent Automatic Generation Control,” Northern Indiana Public Service Company
(NIPSCO), Merrillville, Indiana, September 19, 1996.
“Active Control of Structures,” NSF Coordination Meeting, South Bend, Indiana,
October 4, 1996.
16
“Intelligent Diagnostics and Generation Control,” Industry Advisory Board (IAB)
Meeting, , Tucson, Arizona, October 31, 1996.
Special presentation: “Advanced Control of Power Engineering Systems” College of
Engineering, Penn State University, April 1995.
Special seminar: “Making Machines More Intelligent,” Johnson Control Inc., Research
and Development Center, Milwaukee, Wisconsin, November 1995.
“Engineering Systems,” planning sessions for new ASME initiatives, 1995 ASME-
IMECE, San Francisco, California, November 1995.
Banquet speaker: “Power System Research Activities at CSM,” IEEE Colorado Chapter,
November 1995.
Seminar Speaker: "Active Noise and Vibration Control," College of Engineering,
University of California, Irvine, May 1995.
Seminar Speaker: "Intelligent Automatic Power Generation Control," Engineering
College, University of Michigan, Ann Arbor, April 1995.
Keynote speaker: "Toward the Development of Intelligent Structures," DINAME 95,
Brazil, March 1995.
Seminar Speaker: "Neural-Based Estimation and System Identification," Speaker for the
CSM Intelligent Systems Series, March 1995.
Seminar Speaker: Dept. of Electrical Engineering, University of Campinas, Brazil,
"Neuro-Fuzzy Control Systems," November 1993.
Special Seminar: Brazilian Electric Power Research Council, Rio DeJenerio, "Neural-
Networks for Information Processing," November 1993.
Seminar Speaker: Engineering Division, Colorado School of Mines, "Intelligent Control
Systems for Manufacturing Automation," September 1993.
Seminar Speaker: Dept. of Mechanical Engineering, Wayne State University, Detroit, MI,
"Applications of Intelligent Control to Building Systems," March 1993.
Seminar Speaker: Iran National Oil Company, Tehran, "Robot Assisted Assembly
Systems," June 1992.
Seminar Speaker: Department of Mechanical, Nuclear, and Aerospace Engineering,
University of California, Los Angeles, CA, " Intelligent Building Control Systems," July
1992.
17
Seminar Speaker: Department of Mechanical Engineering, Naval Postgraduate School,
Monterey, CA, "Active Vibration Control," February 1991.
Seminar Speaker: Department of Mechanical Engineering, California Institute of
Technology, Pasadena, CA, "Neural Networks for Identification and Control of Dynamic
Systems," April 1991.
Seminar Speaker: Department of Mechanical Engineering, Arizona State University,
Tempe, AZ, "Intelligent Control for Autonomous Machines," March 1991.
Seminar Speaker: Department of Mechanical and Environmental Engineering, University
of California, Santa Barbara, "Active and Semi-active Vibration Control," April 1990.
Seminar Speaker: Jet Propulsion Laboratory, Pasadena, CA, "Learning for Autonomous
Robotic Manipulators," April 1990.
Colloquium Speaker: University of Illinois, Champaign, lectured on "Machine Learning
for Intelligent Control Systems," March 1989.
Colloquium Speaker: Department of Mechanical Engineering, Purdue University,
lectured on "Autonomous Machines: Is It a Dream or Reality?" April 1989.
Colloquium Speaker: University of Minnesota, lectured on "Integration of A.I. in
Manufacturing Systems," April 1989.
Colloquium Speaker: Drexel University, lectured on "Machine Learning: A New
Challenge for Control Engineers," May 1989.
Seminar Speaker: Firestone Company, lectured on "Active and Semi-Active Vibration
Isolators," February 1989.
Seminar Speaker: Johnson Control, lectured on "Intelligent Diagnostic Systems," April
1989.
Colloquium Speaker, Florida Atlantic University, lectured on "Intelligent Control for
Automated Assembly," April 1988.
Seminar Speaker: Decision and Control Lab., University of Illinois at Urbana, lectured
on "Active and Semi-Active Control of Flexible Structures," October 1987
Seminar Speaker: Department of Mechanical Engineering, Penn State University,
lectured on "Vision-Based Intelligent Control for Automated Manufacturing." November
1987.
1986 - Lecturer, Mitsubishi Electric Corporation, Central Research Laboratory, lectured
on "Active Control of Variable Structure Systems,", Hyogo, Japan, July 1986.
18
1986 - Lecturer, Japan Institute of Space and Astronautical Sciences, lectured on,
"Control of Distributed Parameter Systems with Application to MPD Engines,",
Mombusho, Japan, July 1986.
Seminar Speaker: Systems Measurement & Control Area, School of Mechanical
Engineering, Purdue University, April 30, 1986.
Colloquium Speaker: Aerospace & Mechanical Engineering Department, University of
Notre Dame, January 29, 1986.
VII. Educational and Research Interests
Intelligent Control Systems, Robotics and Mechatronics Engineering, Automation and
Artificial Intelligence; Bio-Inspired Systems; Smart Buildings & Structures, Active Noise and Vibration Control; Design of Advanced Biomedical Sensors and Devices;
Neuromorphic Engineering; Power and Energy Systems, Advanced Monitoring and
Diagnostics Systems; Mathematical Modeling and Simulation of Complex Thermofluid, Power Networks, and Electromechanical Systems.
VIII. Patents
US Patent 8,583,565 November 12, 2013, “Brain Imaging System and Methods for Direct
Prosthesis Control”
US Patent 8,457,705, June 4, 2013, “Brain Imaging System and Methods for Direct
Prosthesis Control”
US Patent 7,716,005, May 11, 2010, “Smart Insole for Diabetic Patients”
US Patent 7,437,934, October 21, 2008, “Self-Contained Apparatus for Inspection of
Electric Conductors”
US Patent 6,382,029, May 7, 2002, “Apparatus and Method for Utilizing Electromagnetic
Acoustic Transducers to Non-Destructively Analyze In-Service Conductive Materials”
US Patent 6,137,886, October 24, 2000, “Active Vibration Control Method and
Apparatus”
US Patent 5,629,986, May 13, 1997, “Method and Apparatus for Active and Semi-Active
Vibration Control”
US Patent 5,564,537, October 15, 1996, “Adaptive-Passive Vibration Control System”
US Patent 5,418,858, May 23, 1995, “Method and Apparatus for Intelligent Active and
Semi-Active Vibration Control”
19
IX. Research Proposals under Review
“Smart Wearable Technologies for Enhanced Vision and Mobility,” Co-PI with Dr. John
Ross Rizzo of NYU, submitted to NIH.
X. Awarded Research Grants
“Neurological System-Inspired Multifunctional Materials Design for Autonomous State
Awareness Against Exogenous Threats," in collaborations with Stanford University,
UCLA, CU-Boulder, and University of British Columbia, $7,500,000 (9/1/2009 to
8/31/2014), AFOSR-MURI.
“Bio-Inspired Sensor/Actuator Platform Using Hydrogels,” in collaborations with
Harvard and Johns Hopkins, $600,000 (9/1/2009 to 8/31/2011), NSF and AFOSR.
“US-Europe Partnership in Informatics for Bio-Inspired Design,” May 2010, Croatia,
$90,000, (9/15/2009 to 12/30/2011), NSF and AFOSR
“Adaptive Cast for Diabetic Patients,” State of Colorado Bioscience Grant, $100,000
(2/1/2010 to 5/30/2011)
“Biosensors, Bioactuators, and Bio-Inspired Systems,” NSF and AFOSR, $68,000
(3/1/2008 to 2/28/2009)
“Workforce Development in IT, Aerospace, and Biosciences Sectors” US Department of
Labor through Denver WIRED Initiative, $405,000, C. Lengsfeld, and Christian Grothoff
as Co-PI (3/1/2008 to 12/30/2009)
“Optical-Based Direct Brain Control of Prostheses,” NSF, CMMI, $298,000 (9/1/2007 to
8/31/2011)
“Feedforward and Feedback Direct Brain Control of Prostheses Using EMG, EEG, and
fNIR Signals,” State of Colorado Bioscience Grant, $80,000, (9/1/2008 to 8/31/2011).
“Innovative Partnership for STEM Workforce Development,” US Department of Labor
through Denver WIRED Initiative, $450,000 (10/1/2007 to 12/31/2008), C. Lengsfeld
Co-PI.
“Smart Systems for Mitigation on Exogenous Threats Using Autonomic Response,”
NSF/AFOSR/ONR joint workshop, $106,318 (3/1/06 to 12/31/07).
“Research Center on Assistive Technologies for Geriatrics,” sponsored by the
Department of Health and Human Services, $200,000 (8/1/2005 to 7/31/2006).
“Forisome-Based Sensory Nervous System for Civil Structures,” sponsored by NSF,
$180,000 (5/1/2005 to 4/30/2008).
20
“Frontiers in Simulation and Analysis of Dynamic Systems,” sponsored by NSF, $98,000
(2/1/2007 to 12/31/2008).
“USA-Europe Collaborative Research on Smart Structures and Sensor Technologies,”
sponsored by NSF, $140,000 (4/1/2005 to 3/31/2008).
“Us-Europe Cooperative Program on Smart Sensor Technologies and Informatics for
Civil Structures,” sponsored by NSF, $137,000 (2/15/05 – 1/31/08).
“Creation of National Forum for Synergistic Program Development in Smart Structures
and Sensor Technologies,” sponsored by NSF, $189,680 (9/1/03 – 6/1/06).
“Intelligent Monitorig System for High Voltage Transmission Lines,” sponsored by EPRI,
$250,000 (9/1/03 to 12/31/05).
“EMAT Conductor Inspection Technology,” sponsored by EPRI, $117,127 (8/1/03 –
12/31/06).
“Intelligent Haptic System for Exoskeletons,” sponsored by DARPA, $382,000, (8/1/03
to 12/31/05).
“Sensor Technologies and Smart Structures,” sponsored by NSF, $40,000 (8/1/03 to
12/31/04)
“Smart Structures and Advanced Sensor Technologies,” sponsored by NSF, $192,000,
(3/1/02 to 2/28/05).
“Optimal Control of Combined Heat & Power Systems,” sponsored by NISource Energy
Technology, $150,000 (8/1/02 to 2/28/05).
“Optical-Based Monitoring System for High Voltage Transformers,” sponsored by
WAPA, Tri-State G&T, $120,000, (6/1/02 to 12/31/03).
“Colorado Advanced Research Program in Bioscience and Bioengineering,” sponsored
by the State of Colorado, $500,000, (9/15/01 to 6/30/02).
“Optimal Control Design for Combined Heat and Power System in Smart Buildings,”
sponsored by DoE, NREL and NIPSCO, $400,000, (1/1/01 to 1/31/03).
“Intelligent Electric Power Substations,” sponsored by EPRI, WAPA, Tri-State G&T,
$250,000, (9/1/00 to 12/31/03).
“I/UCRC for Power System Engineering Research Center (PSERC),” second five-year
cycle, sponsored by NSF, $240,000, (9/1/00 to 8/31/03).
“Analytical and Experimental Evaluation of Substation Ground Integrity,” sponsored by
NIPSCO and EPRI Solutions, $30,000.00, (4/1/00 to 3/31/01).
21
“Enhanced Reliability and Power Quality through Intelligent Generation Control,”
sponsored by DoE and NIPSCO, $420,000, (3/21/00 to 3/20/03).
“Evaluation of Electro-Magnetic-Acoustic Transducers,” sponsored by EPRI, $17,300.00
(10/31/99 to 9/30/00).
“EMAT-Based Monitoring System for ACSR Transmission Lines,” WAPA, Tri-State,
Nebraska Public Service, Interconexion Electrica S.A., Columbia, Electric de France,
EPRI, $540,000, (9/1/99 to 9/31/02).
“Design of a Telemetric Patella,” Sponsored by CATI, $50,000, (8/15/99 to 8/14/00)
“Development of Intelligent Substation,” Sponsored by WAPA, EPRI, Tri-State,
$200,000, (8/1/99 to 9/31/01)
“Future Research Direction in Civil Infrastructure Systems,” sponsored by NSF, $42,000,
(11/1/98 to 8/31/99).
“Research for Minority Undergraduates,” sponsored by NSF, $30,000, (9/1/98 to
8/31/00).
"I/UCRC for Intelligent Biomedical Devices and Musculoskeletal Systems (IBDMS),"
sponsored by NSF, $425,000 (2/2/98 to 2/1/03).
“Fiber Optic-based Transformer Diagnostics,” Sponsored by Tri-State G&T, WAPA, and
EPRI, $190,000, (12/1/97 to 11/30/99).
“High Performance Actuator Design,” Sponsored by Cooper Tire and Rubber, $130,000,
(9/1/97 to 12/31/00).
"Monitoring and Health Assessment of Machinery, Processes and Products," sponsored
by the National Science Foundation (NSF) CRCD program, $422,000, (7/1/97 to
6/31/01).
“An In-Situ Nitric Oxide Sensor for Power Plant Emission Control,” with T. Parker and
M. Linne, sponsored by NSF and EPRI, $350,000. (10/1/95 to 9/30/98).
“Integrated Systems Approach to Infrastructure Education,” sponsored by NSF, $562,500,
(9/01/95 to 8/31/00).
“Intelligent Diagnostics for Health Monitoring of Ground Grid Risers,” sponsored by
Western Area Power Administration (WAPA) and EPRI, $150,000. (9/1/95 to 8/31/98).
“I/UCRC for Advanced Control of Energy and Power Systems (ACEPS),” sponsored by
NSF, $425,000, (8/31/95 to 3/1/99).
“Active Vibro-Acoustic Control System for Automotive Vehicles,” sponsored by Cooper
Tire and Rubber, $98,000. (8/1/95 to 12/31/96).
22
“Low Powered Actuators for Intelligent Control of Structures,” sponsored by NSF,
$129,000. (7/1/95 to 2/28/97).
“Power Quality and Automatic Generation Control,” sponsored by EPRI, $89,000.
(3/1/95 to 12/31/96).
"Optimal Power generation and transmission in the Presence of IPP's," Under ACEPS
Center, sponsored by Public Service Company of Colorado (PSCO), and EPRI, $250,000
(1/1/95 to 12/31/99).
"Identification of Harmonics and their Direction of Flow," under ACEPS Center,
sponsored by WAPA and EPRI, $250,000 (1/1/95 to 12/31/99).
“Intelligent Diagnostics for Electric Power Substations,” sponsored by WAPA, Kansas
Electric Utilities Research Program (KEURP), and EPRI, $100,000. (1/1/95 to 12/31/98).
“Development and Commercialization of Active Noise and Vibration Control,”
Sponsored by Cooper-Standards Automotive, $10,000,000 (10/1/94 to 12/31/99).
"Power Quality and Advanced Generation Control," sponsored by EPRI, NIPSCO, PSI,
KEURP, and EKP, $342,000 (12/1/93 to 12/31/95).
"Intelligent Automatic Generation Control," sponsored by Commonwealth Edison,
Chicago, $50,000 (12/1/93 to 12/31/94).
"Active Adaptive Vibro-Acoustic Control System for Automotive Vehicles," sponsored
jointly by Ford Motor Co. and Cooper Tire, $160,000 (9/1/93 to 2/28/96).
"Intelligent Structures and Control Systems," sponsored by NSF, $242,000 (7/1/93 to
6/30/96).
"Intelligent Automatic Generation Control and Power Quality," sponsored by EPRI,
$338,000 (12/15/91 to 6/1/94).
"Intelligent Machines for Automated Assembly," sponsored by NSF-ERC, $198,000
(8/1/91 to 1/31/94).
"Feasibility Study of Active Noise Control for Aircraft Engines," sponsored by NASA,
$85,500 (5/1/91 to 2/28/93).
"Autonomous Underwater Vehicles," Office of Naval Research, jointly with Prof. Healey
at Naval Postgraduate School, Monterey, CA, $64,000 (4/1/91 to 8/31/92).
"NSF-EPRI Workshop on Intelligent Control Systems," sponsored by NSF, $45,856
(9/1/90 to 2/29/92).
23
"Intelligent Automatic Generation Control System for Northern Indiana Public Service
Company Generating Units," sponsored by NIPSCO, $298,847 (1/1/90 to 12/31/93).
"Neural Network Based Control of Complex Systems," sponsored by NSF, $108,000
(8/1/88 to 6/1/91).
"Integrated Control Systems for Intelligent Buildings," sponsored by NSF, $280,000
(1/1/88 to 12/31/90).
"Dynamic Analysis and Control of Hybrid Stepping Motors," sponsored by NSF, $90,000
(9/1/87 to 8/31/90).
"Electronically Controlled Adaptive Hydraulic Engine Mounts," sponsored by Cooper
Tire and Ford Motor Company, $303,500 (9/1/84 to 12/31/90).
"Intelligent Control and Actuator Design for Vision Guided Automated Assembly Cell,"
Purdue/NSF Engineering Research Center on Intelligent Manufacturing, $255,200 (9/1/86
to 8/31/90).
"Model Reference Adaptive Steam Temperature Control of an Electric Power Plant,"
sponsored by Link Foundation, $14,000 (7/1/86 to 6/30/87).
"Real-Time Adaptive Control of Manipulators with Uncertain Dynamics Using Optical
End-Effector Sensing," David Ross Grant, Purdue University, $13,200 (1986,1987).
"Diagnostics for Intelligent Adaptive Control of Propulsion Systems," sponsored by Air
Force Office of Scientific Research (AFOSR), $264,000 (9/29/85 to 9/28/88).
"Adaptive, Real time Control for Three-Dimensional Active Attenuation of Sound,"
sponsored by NSF, $191,334 (9/1/85 to 8/31/87).
"Microprocessor-Based Intelligent Failure Diagnostic Systems," sponsored by Whirlpool
Corporation, $311,785 (1/1/85 to 8/31/89).
"Feasibility of Three Dimensional Active Attenuation of Sound," David Ross Grant,
sponsored by Purdue University, $13,200 (1985, 1986).
"Application of Modern Technologies for Enhancement of Sound-Powered Telephone Performance," sponsored by Hose-McCann Telephone Company, $57,646 (6/1/84 to
12/31/85).
"Adaptive, Digital Control of Coal Fired Power Plants in Minimum Load Conditions,"
sponsored by Commonwealth Edison, Chicago, $30,000 (9/1/83 to 6/30/86).
XI. Books and Book Chapters
R. Shoureshi, “Introduction to Bioengineering,” Prentice Hall, Book Chapter, December
2004.
24
R. Shoureshi, “Electro-Magnetic Acoustic Transducers (EMAT)” EPRI’s Advanced
Sensor Technology book, published in 2000.
R. Shoureshi, M. Franke, “Engineering Systems,” ASME publication, G 01042, Nov.
1996.
R. Shoureshi, “Intelligent Control Systems,” chapter 10 of the book entitled “Advanced
Control Systems” IEEE/EAB publication, December 1995.
R. Shoureshi, M. Wheeler, L. Brackney. “Applied Intelligent Control Systems,” chapter 5
of the book entitled, “Applied Intelligence in Industrial Decision Making, Control and
Automation,” Klower Academic Publishers, 1995.
R. Shoureshi, “Self-Study on Modern Control Systems,” IEEE publication, pp. 91-94,
1995.
Co-editor and co-author of a book entitled “Active Control of Vibration and Noise,”
ASME Publication G00897, DE- Vol. 75, 1994.
Editor and co-author, "Active Vibration and Noise Control," proceedings of the ASME
Symposium, November 1994
R. Shoureshi, "Variable Structure and Learning Controls for Robotic Manipulators," in
the book entitled "Variable Structure Control for Robotics and Aerospace Applications,
No. 10, Elsevier, pp. 211-246, November 1993.
"Intelligent Control Systems," Editor and co-author, ASME publications No. G00764,
November 1992.
R. Shoureshi, "A Framework for Intelligent Structures," in the book entitled "Structural
Control and Intelligent Systems," USC publication, July, 1992.
R. Shoureshi, R. Chu, M. Tenorio, "Neural Networks for System Identification," in the
book entitled "Artificial Neural Networks, Concepts and Control Applications," IEEE
Computer Society Press, pp. 492-496, 1992.
"Intelligent Control Systems" Editor and co-author, ASME publications, November 1990.
R. Shoureshi, K. Rahmani, V. VanDoren, "Intelligent Building Control Systems," in the
book entitled "Intelligent Structures," published by Elsevier, November 1990.
"Intelligent Control Systems," Editor and co-author, ASME publication H00549,
November 1988.
"Intelligent Control," Editor and co-author, ASME publication G00382, November 1987.
25
"Dynamic and Control of Thermofluid Processes and Systems," Editor and chapter
author, ASME publication G00282, November 1986.
"Modeling and Control of Robotic Manipulators and Manufacturing Processes," Editor,
ASME publication G00383, November 1987.
XII. Refereed Publications
A. Archival Journal Articles
Rahmat A. Shoureshi, Christopher M. Aastad, “Wearable Hybrid Sensor Array for Motor Cortex Monitoring,” Periodical of Advances in Science and Technology Vol. 85 in 2013 entitled Wearable/Wireless Body Sensor Networks for Healthcare Applications.
Rahmat A. Shoureshi, Sun Lim, “Bio-Inspired Nervous System for Civil Structures,”
Journal of Smart Structures and System, Vol. 5, No. 2, 2009.
Robin Murphy, Jeffery Kravitz, Sam Stover, Rahmat Shoureshi, ”Robot-Assisted
Underground Mine Rescue,” published in the IEEE Robotics and Automation Magazine,
March 2009.
M. Tomizuka, L. Bergman, B. Shapiro, R. Shoureshi, B.F. Spencer, Jr. , and M. Taya,
“Bio-inspired Autonomous Engineered Systems,” Journal of Smart Structures and
Systems, Vol. 3, No.4, 2007.
Rahmat A. Shoureshi, Amy Q. Shen, “Design of a Biomimetic-Based Monitoring and
Diagnostic System for Civil Structures,” Int. J. Nanotech., Vol. 4, No. 3, 2007.
Rahmat A. Shoureshi, “Introduction to Bioengineering: Melding of Engineering and
Biological Sciences,” Otolaryngologic Clincs of North America, 38 (2005) 185-197.
Steven D. Glaser, Rahmat A. Shoureshi, and David Pescovitz, “Frontiers in Sensors and
Sensing Systems,” Smart Structures and Systems, Volume 1, Number 1, January 2005.
Rahmat A. Shoureshi, Sun-Wook Lim, Eli Doley, Benny Sarusi, “Electro-Magnetic- Acoustic Transducers for Automatic Monitoring and Health Assessment of Transmission
Lines”, ASME Journal of Dynamic Systems, Measurement and Control, June 2004, Vol. 126, No. 2.
S. C. Liu, M. Tomizuka, R. A. Shoureshi, “Strategic Research for Sensors and Smart
Structures Technology”, International Journal of Smart Materials and Structures, June
2004.
S.A. Ottele, R. Shoureshi, "Neural Network-Based Adaptive Monitoring System for
Power Transformer", ASME Journal of Dynamic Systems, Measurement and Control,
Vol. 123, pp. 512-517, September 2001.
26
L.R. Hagaman, S.F. Albert, and R. Shoureshi, “LEAP Program Monofilaments: Can They
Be Used as an Accurate Diagnostic Tool?” International J. of Foot Medicine, Dec. 2000.
R. Shoureshi, R. Komistek, "Smart Implants May Soon Be A Reality", The Denver
Business Journal, August 1998.
R. Shoureshi, T. Knurek, “Automotive Applications of a Hybrid Active Noise and
Vibration Control,” IEEE Control System, Vol. 16, No. 6, December 1996.
R.A. Shoureshi, M.E. Franke, “Engineering Systems Face the Future,” ASME
Mechanical Engineering, Vol. 118, No. 11, November 1996.
R.A. Shoureshi, R.D. Hanson, H.H. Roger, C.A. Shinozuka, H.A. Smith, “Role of
Intelligent Material Systems and Structures”, J. of Intl. Materials Systems And Structures,
Vol. 6, No.1, pp. 3-12, January 1996.
R. Shoureshi, M. Wheeler, L. Brackney, “Applied Intelligent Control Systems,” J. of
Artificial Intelligence, pp. 101-126, Klower Academy, September 1995.
G.T. Heydt, D. Karipides, R. Shoureshi, M. Wheeler, “Active and Reactive Power Flow
for Multi-area Systems AGC,” IEEE Journal of Electric Machines and Power Systems,
1995.
R. Shoureshi, L. Brackney, G.R. Batta, “A Modern Control Approach to Active Noise
Control,” ASME J. of Dynamic Systems, Measurement and Control, Vol. 115, No. 1, pp.
673-678, January 1995.
R. Shoureshi, M. Bell, D. Alves, “Intelligent Control and Actuators for Structures,”
published in Smart Materials and Structures, Institute of Physics, England. No. 4, pp.
A132-A139, 1995.
J. Wagner, R. Shoureshi, “Modeling and Observer Design for nonlinear Thermofluid
Systems,” Intl. J. of Modeling, Vol. 13, No. 1, pp.39-45, January 1994.
R. Shoureshi, L. Brackney, G.R. Batta, "A Modern Control Approach to Active Noise
Control," ASME J. of Dynamic Systems, Measurement and Control, Vol. 115, No. 4, pp.
673-678, December 1993.
J. Wagner, R. Shoureshi, "Modeling and Observer Design for Nonlinear Thermofluid
Systems," Intl. J. of Modeling, Vol. 13, No. 1, pp. 39-45, December 1993.
R.Shoureshi, J. Wagner, "A Failure Isolation Strategy for Thermofluid System
Dynamics," ASME J. of Engineering for Industry, Vol. 115, No. 4, pp. 459-465,
December 1993.
27
R. Shoureshi, "Intelligent Control Systems: Are They for Real?" Special 50th
Anniversary issue of the ASME J. of Dynamic Systems, Measurement and Control, Vol.
115, No. 2(B), pp. 392-401, June 1993.
J. Wagner, R. Shoureshi, "Failure Detection Diagnostics for Thermofluid Systems,"
ASME J. of Dynamic Systems, Measurement and Control, Vol. 114, pp. 699-706,
December 1992.
R. S. Chu, R. Shoureshi, "Identification of Dynamical Systems Using Neural Networks,"
the IMACS Transactions, June 1992.
J. Wagner, R. Shoureshi, "A Robust Failure Diagnostic System for Thermofluid
Processes," Automatica, the IFAC Journal,Vol. 28, No. 2, pp. 375-381, March 1992.
R. Shoureshi and R. Chu, "Applications of Neural Networks in Learning of Dynamical
Systems," The IEEE Systems, Man and Cybernetics, Vol. 22, No. 1, pp. 160-164,
January/February 1992.
R. Shoureshi, K. Rahmani, "Derivation and Application of an Expert Fuzzy Optimal
Control System," the Intl. J. for Fuzzy Sets and Systems, Vol. 49 pp. 93-101, 1992.
R. Shoureshi, "Learning and Decision Making in Intelligent Control Systems," IEEE
Control Systems Magazine, Vol. 11, No.1, January 1991.
R. Shoureshi, D. Swedes, R. Evans, "Learning Control for Autonomous Machines,"
International J. of Robotica, Vol. 8, Part 3, July/Sept. 1990.
R. Shoureshi, S.R. Chu, M.F. Tenorio, “Neural Networks for System Identification,”
IEEE Control Systems Magazine, Vol. 10, No.4, April 1990
R. Shoureshi, P. Graf, "Gain Sensitivity Augmentation for Near Optimal Control of
Parameter Dependent Systems," AIAA J. of Guidance and Control, Vol. 13, No. 2, pp.
310-320, March/April 1990.
R. Shoureshi, R. Evans, W. Stevenson, "Optically-Driven Learning Control for Industrial
Manipulators," IEEE Control Systems Magazine, Vol. 9, No. 6, pp. 21-26, October 1989.
R. Shoureshi, M. Momot, R. Mitchell, J. Feddema "Vision-Based Intelligent Control for Automated Assembly," J. of Intelligent & Robotic Systems, Vol. 2, pp. 153-170, October
1989.
J. Dohner, R. Shoureshi, "Active Noise Control Using Source Point Model," J. of
Acoustical Society of America, Vol. 86, No. 3, pp. 1053-1059, September 1989.
J. Dohner, R. Shoureshi, "The Modal Control of Acoustic Plants," ASME J. of
Vibrations, Acoustics, Stress, and Reliability in Design, Vol. III., No. 3, pp. 326-330, July
1989.
28
R. Shoureshi, "On Passive Implementation of Feedback Control Systems," ASME J. of
Dynamic Systems, Measurement and Control, Vol. III., No. 2, pp. 339-342, June 1989.
R. Shoureshi, R. Evans, "Gaining Control Over a Manipulator," ASME publication,
Mechanical Engineering, Vol. 111, No. 6, June 1989.
R. Shoureshi, F. Pourki, "Lyapunov Approach to Stability Analysis of Nonlinear
Distributed MPD Engine," the AIAA J. of Guidance, Control and Dynamics, Vol. 12, No.
5, pp. 757-760, September/October 1989.
P. Graf, R. Shoureshi, "Modeling and Implementation of Semi-Active Hydraulic Engine
Mounts." ASME J. of Dynamic Systems, Measurement and Control, Vol. 110, No. 4, pp.
422-429, December 1988.
R. Shoureshi, M. D. Roesler, M. J. Corless, "Control of Industrial Manipulators with
Bounded Uncertainties." ASME J. of Dynamic Systems, Measurement and Control, Vol.
109, pp. 53-59, March 1987.
R. Shoureshi, D. Carey, "Design and Implementation of a Solar-Powered Active Filter."
the International J. of Mechanical Engineering Vol. 15, No. 3, pp. 182-192, 1987.
R. Shoureshi, P. Graf, T. Houston, "Adaptive Hydraulic Engine Mounts." Transactions of
Society of Automotive Engineers, December 1987.
R. Shoureshi, K. McLaughlin, "Entropy-Volume Plane: A New Approach to On-Line
Calculation of Refrigerant Properties." The International Journal of Refrigeration, Vol.
10, No. 6, November 1987.
R. Shoureshi, D. Carey, "Bond Graph Modeling of an Electro-acoustic Transducer." The
Journal of The Franklin Institute, Vol. 323, No. 1, pp.73-88, 1987.
J. Dohner, R. Shoureshi, and R. Bernhard, "Transient Analysis of Three Dimensional
Wave Propagation Using the Boundary Element Method," Intl. J. for Numerical Methods
in Engineering, Vol. 24, pp. 621-634, 1987.
R. Shoureshi, D. Carey, "Modeling of Coupled Systems Using Bond Graphs." Intl. J. of
Modeling and Simulation, Vol. 7, No. 1, pp. 15-19, 1987.
R. Shoureshi, K. McLaughlin, "Extended Kalman Filter for Reconstruction of a
Nonlinear Thermofluid System," ASME J. of Dynamic Systems, Measurement and
Control, Vol. 108, pp. 156-158, June 1986.
R. Shoureshi, K. McLaughlin, "Applications of Bond Graphs to Thermofluid Processes
and Systems," ASME J. of Dynamic Systems, Measurement and Control, Vol. 107, pp.
241-245, December 1985.
29
H.M. Paynter, R. Shoureshi, "Introduction to Dynamics and Control of Thermofluid
Processes and Systems," ASME J. of Dynamic Systems, Measurement and Control, Vol.
107, pp. 230-232, December 1985.
R. Shoureshi, K. McLaughlin, "Analytical and Experimental Investigation of Flow-
Reversible Heat Exchangers Using Temperature-Entropy Bond Graphs," ASME J. of
Dynamic Systems, Measurement and Control, Vol. 106, pp. 170-175, June 1984.
B. Other Refereed Publications
Chris Aasted, Rahmat Shoureshi, Ma Lu, “Neoro-Symbolic Networks for Global
Diagnostics of Complex Systems,” 2014 CIMTEC Conference, June 2014, Italy.
Chris Aasted, Rahmat Shoureshi, Sun Lim, “Vehicle Health Inferencing Using Feature-
Based Neural-Symbolic Networks,” Proceedings of 2013 ASME Dynamic Systems and
Control Conference, October 20-23, 2013, Stanford.
Rahmat Shoureshi, Sun Lim, Chris Aasted, “Reconfigurable Hybrid Control System for
Aerospace Vehicles,” Proceedings of 2013 ASME Dynamic Systems and Control
Conference, October 20-23, 2013, Stanford.
Chris Aasted, Rahmat Shoureshi, Benny Sarusi, “Hybrid Non-Invasive Sensor System for
Direct Brian Control of Artificial Limbs,” Proceedings of the 2010 ASME Dynamic
Systems and Control Conference, September 12 -14, 2010, Cambridge.
Rahmat Shoureshi, Virdi Permana, “Controllability and Observability of Large-Scale
Nonlinear Thermofluid Systems,” Proceedings of the 2010 ASME Dynamic Systems and
Control Conference, September 12 -14, 2010, Cambridge.
Virdi Permana, Rahmat Shoureshi, “Optimal Energy Control of Large Scale Building
Systems,” Proceedings of the 2009 ASME Dynamic Systems and Control Conference,
October 12-14, 2009, Hollywood, CA.
Rahmat Shoureshi, Sun Lim, “Bio-Inspired Smart Structures,” Proceedings of the 2009
SPIE Conference on Smart Structures, March 2009, San Diego.
Rahmat Shoureshi, Virdi Permana, “Next Generation of Aerospace Structures,”
Proceedings of the 3rd
Mediterranean Control Conference, March 2009, Tunis.
Virdi Permana, Rahmat Shoureshi, “Observability of Commercial Buildings for Energy
Optimization,” Proceedings of the International Dynamics and Control Conference, May
2009, Barcelona.
Rahmat A. Shoureshi, Virdiansyah Permana and Mohammad B. Khayani, “Intelligent
Control of Energy Usage in Commercial Building,” Proceedings of the 2006 ASME
International Mechanical Engineering Congress and Exposition, Nov. 2006, Chicago.
30
Rahmat A. Shoureshi, Sun-Wook Lim, “Smart Diagnostic System for High Voltage
Electric Transmission Lines,” Proceedings of the 2006 ASME International Mechanical
Engineering Congress and Exposition, Nov. 2006, Chicago.
Sun-Wook Lim, Rahmat A. Shoureshi, “Intelligent Monitoring System for Automatic
Assessment of Electric Power Infrastructure”, Proceedings of 2006 International
Symposium on Flexible Automation, Osaka, Japan, July 2006.
Rahmat A. Shoureshi, Amy Shen, “Forisome-Based Nano Sensors and Actuators,”
Proceedings of ASME Energy Nanotechnology International Conference, MIT,
Massachusetts, June 26-28, 2006.
Rahmat A. Shoureshi, Amy Shen, “Nano Structural Nerve System Using Forisomes,”
Proceedings of the 4th
Annual NanoMaterials for Defense Application Symposium, Virginia Beach, Virginia, May 1-4, 2006.
Rahmat A. Shoureshi, Amy Shen, “Self-powered sensory nerve system for civil structures
using hybrid forisome actuators”, presented at SPIE 5908, San Diego, California,
February 2006.
Sun-Wook Lim, Rahmat A. Shoureshi, “Advanced Monitoring System for Integrity
Assessment of Electric Power Transmission Lines,” presented at American Control
Conference, Minneapolis, Minnesota, June 2006.
Rahmat A. Shoureshi, Naqib Hussain, Amy Shen, “Conceptual Design of a Nervous
System for Control, Monitoring and Diagnostics of Civil Structures,” presented Bejing,
China, October 2005.
Rahmat A. Shoureshi, Amy Q. Shen, “Design of a Biomimetic-Based Monitoring &
Diagnostic System for Civil Structures,” Keynote lecture, proceedings of DARPA
sponsored workshop on nanomaterials, Greece, May 2005.
“Optical Sensor for Monitoring of Vigh-Voltage Electric Transformers,” presented at
SPIE 5907, San Diego, California, August 2005.
“Fiber Bragg Sensor for Smart Bed Sheet,” presented at SPIE 5907, San Diego,
California, August 2005.
Rahmat A. Shoureshi, Sun W. Lim, Amir Chaghajerdi, “Hybrid Control, Optimal Sensor
Locations, and Informatics,” Proceedings of Smart Structures Technologies and
Earthquake Engineering (SE04), Osaka, Japan, July 2004.
Rahmat Shoureshi, Tim Norick, Ryan Swartzendruber, “Intelligent Transformer
Monitoring System Utilizing Neuro-Fuzzy Technique Approach,” PSERC Publication
04-26, July 2004.
Rahmat Shoureshi, Virdiansyah Permana, Robert Wood, Ryan Swartzendruber, Marcelo
Simoes, “Smart Sensor Project,” PSERC Publication 04-27, July 2004.
31
Sun-Wook Lim, Rahmat A. Shoureshi, “Transducer Design and Neural Signature
Analysis for Diagnosis of Energized Transmission Lines,” Proceedings of the American
Control Conference, v4, 2004, pp. 3735-3740.
Rahmat A. Shoureshi, Sun-Wook Lim and Michael Chenoweth, “Electro-magnetic-
acoustic transducers for automatic monitoring and health assessment of transmission
lines.” Proceedings of American Society of Mechanical Engineers, Dynamic Systems
and Control Division (DSC), v72, n2, 2003, pp. 1151-1157.
Sun-Wook Lim, Rahmat A. Shoureshi, “Neural-Based Monitoring System for Health
Assessment of Electric Transmission Lines,” Proceedings of 2003 American Control
Conference, v3, 2003, pp. 2270-2275.
Rahmat A. Shoureshi, Amir H. Chaghajerdi, “Active Noise Control Systems with
Random Excitations,” Proceedings of 2003 ASME International Mechanical Engineering
Congress, November 2003.
Amir H. Chaghajerdi, Rahmat A. Shoureshi, “Analysis, Design, and Implementation of
ActiveVibro-Acoustic Control Systems with Random Excitations,” Proceedings of 2003
American Control Conference, June 2003.
Dr. Rahmat Shoureshi, Tim Norick, David Linder, John Work, “Electric Power
Transformer Diagnostics Using Neural-Based Observer,” Proceedings of 2003 American
Control Conference, June 2003.
Benjamin Hoffner, Rahmat A. Shoureshi, R.A. Kramer, “Development of an Intelligent
Automatic Generation Control System for Electrical Power Plants,” Proceedings of
ASME International Mechanical Engineering Congress & Exposition, November 2002.
Benjamin Hoffner, Rahmat A. Shoureshi, R.A. Kramer, “Feedforward Neural Fuzzy
Control of Electrical Power Systems Containing Highly Varying Loads”, Proceedings of
2002 American Control Conference, May 2002.
Rahmat A. Shoureshi, Benjamin Terry, “Neural-Based Remote Health Assessment and
Failure Diagnostics,” Proceedings of 2001 ASME International Mechanical Engineering
Congress and Exposition, November 2001.
R. Shoureshi, B. Hoffner, R. Kramer, “Intelligent Automatic Generation Control in the
Presence of Highly Varying Loads,” Proceedings of IEEE Power Tech Conference,
September 2001, Porto, Portugal.
Tor Fretheim, Tyrone L. Vincent, Rahmat Shoureshi, “Optimization Based Fault
Detection for Nonlinear Systems,” Proceedings of 2001 American Control Conference,
June 2001
32
R.A. Shoureshi, B. Terry, “Applications of World Wide Web in Teaching Large Scale
Machinery Diagnostics, Proceedings of the 2000 ASME International Mechanical
Engineering Congress and Exposition, November 2000.
Hoffner, R. Shoureshi, R. Kramer, “Fuzzy Control of Electric Power Generation,”
Proceedings of the ASME-DSC Division, IMECE 2000, Nov. 2000.
T. Fretheim, R. Shoureshi, T. Vincent, “Diagnostics of Nonlinear Systems Using Output
Observers,” Proceedings of the ASME-DSC Division, IMECE 2000, Nov. 2000.
B. Terri, R. Shoureshi, “Internet-Based Monitoring and Diagnostics,” Proceedings of the
ASME-DSC Division, IMECE 2000, Nov. 2000.
R. Shoureshi, H. Li, "Design of Advanced Feedback Control for Electric Power
Generation System", Proceedings of the 2000 American Control Conference, Chicago,
June 2000.
R. Shoureshi, Z. Hu, “Tsukamoto-Type Neural Fuzzy Inference Network”, Proceedings
of the 2000 American Control Conference, Chicago, June 2000.
T. Fretheim, R. Shoureshi, T. Vincent, “A General Approach to Non-Linear Output
Observer Design Using Neural Models”, Proceedings of the 2000 American Control
Conference, Chicago, June 2000.
R. Shoureshi, A. Chaghajerdi,”Optimal Placement of Sensors and Actuators in
Distributed Parameter Systems”, Proceedings of the DSCD-IMECE, Nashville, Tenn.,
November 14-19, 1999.
R. Shoureshi, A. Ottele, J. Work, “Neural Network-Based Diagnostics of Power
Transformers”, Proceedings of the DSCD-IMECE, Nashville, Tenn., November 14-19,
1999.
R. Shoureshi, H. Karkosch, F. Svaricek, “Automotive Applications of Active Vibration
Control”, Proceedings of the 1999 European Control Conference, Karlsrule, Germany,
August 31st
– September 3, 1999.
R. Shoureshi, T. Fretheim, “Predictive Maintenance: A First Step Toward Intelligent
Substations”, Proceedings of EUCI Reliability Centered Maintenance Conference, Denver, CO, August 26-27, 1999.
R. Shoureshi, M. Bell, “Active Control of Civil Structures with Application to Bridges”,
Proceedings of the American Control Conference (ACC-1999), San Diego, CA., June 2-
4, 1999.
R. Shoureshi, J. Vance, H. Karkosch, F. Svaricek, “Active Vibration Control for
Enhanced Automotive NVH Characteristics”, proceedings of the Adaptronic Congress,
Potsdam, Germany, March 1-4, 1999.
33
A. Ottele, R. Shoureshi, D. Torgerson, J. Work, “Hopfield-Based Monitoring System for
Electric Transformers”, Proceedings of the 32nd
Substation Diagnostic Conference, New
Orleans, February 22-24, 1999.
R.A. Shoureshi, L.A. Brakney, “Fuzzy Energy Management System for Large Buildings,”
Proceedings of the ASME Dynamic Systems and Control (DSCD), November 1996.
J.A. Edwards, R.A. Shoureshi, “Object Recognition Using Geometric Hashing
Technique,” Proceedings of the ASME Dynamic Systems and Control (DSCD),
November 1996.
R. Shoureshi, T. Knurek, M. Wheeler, “Active Control of Vehicle Interior Noise,”
Proceedings of the ASME Active Vibration and Noise Symposium, November 1996.
R.A. Shoureshi, M.J. Bell, “Active Control of Cable-Stayed Bridges,” Proceedings of the
NSF Structural Control Workshop, October 1996.
Shoureshi, R.A., “Intelligent Control Systems,” Track Q, No. 6, IFAC World Congress,
Symposium Panel, July 1996.
R. A. Shoureshi, “Sensory System and Intelligent Control for Electric Power Plants,” Vol.
7, No. 1, IFAC World Congress, July 1996.
R.A. Shoureshi, G. Alves, M.J. Bell, “Hybrid Control of Cable-Stayed Bridges,”
Proceedings of the IFAC World Congress, July 1996.
R.A. Shoureshi, M.J. Bell, “Active and Semi-Active Control of Structures,” Proceedings
of the American Society of Civil Engineers, May 1996.
R.A. Shoureshi, J. Gosink, N. Middleton, “A Curriculum for Engineering Systems”,
Proceedings of the ASME-IMECE, Go1042, pp. 1-10, 1996.
R. Shoureshi, M. Bell, “Implementation Issues Related to Active Control of Structural
Vibration,” proceedings of ASME-IMECE, Special Symposium on Active Noise and
Vibration, November 1995.
R. Shoureshi, T. Knurek, D. Alves, “Piezo-Based Active Noise Control of Enclosures,”
proceedings of ASME-IMECE, November 1995.
R. Shoureshi, D. Alves, T. Knurak, D. Novotny, L. Ogundipe, “Active Vibration Control
of Automotive Systems,” International Symposium on Advanced Automotive
Technology, Mechatronics Vol., Stuttgardt, Germany, September 1995.
M. Bell, R. Shoureshi, “Active Vibration Control of Structures Using Smart Actuators,”
proceedings of ASME Vibration Conference, Boston, Mass., September 1995.
34
R. Shoureshi, M. Bell, D. Alves, M. Wheeler, “Implementation of Active Control
Systems,” American Control Conference (ACC-1995), Seattle, WA, Vol. V, June 1995.
R. Shoureshi, M. Bell. A. Smith, “Active Control of Cable Stayed Bridges,” annual
meeting of the American Society of Civil Engineers, Vol. III, May 1995.
R. Shoureshi, M. Bell, “Intelligent Control of Structures,” invited paper for the NSF
Workshop on Natural Hazard Mitigation, Lake Tahoe, April 1995.
R. Shoureshi, L. Brackney, “Fuzzy-Based Self-Organizing Control for Building
Systems,” Control Conference (ACC-1994), Vol. 3, pp. 3060, 1994.
R. Shoureshi, P. Meckl, “Teaching Microprocessors in the 90’s and Beyond,” American
Control Conference (ACC-1994), Vol. 1, pp. 674-678, 1994.
R. Shoureshi, G. Alves, “Active Noise Control: A Marriage of Acoustics and Control,”
American Control Conference (ACC-1994), Vol. 3, pp.3444-3448, 1994.
S.R. Chu, R. Shoureshi, “Neural-Based Identification of Dynamic Systems, “ 1994 IFAC
Symposium on SYS-ID, Vol. 2, pp. 331-335, 1994.
R. Shoureshi, M. Bell, “Neural-Based Intelligent Control of Structures, “ First World
Congress on Intelligent Structures, Vol.1, August 1994.
D. Alves, R. Shoureshi, T. Knurek, L. Ogundipe, “Active Vibro-Acoustic Control Using
Smart Materials, “ ASME Winter Annual Meeting, Special Publication No. G00897, DE-
Vol. 75 pp.51-56, 1994.
R. Shoureshi, L.A. Cardoso, “Fuzzy Pattern Analysis Using Unsupervised Neural
Network Clustering, “ XIV Congress on Computation, Brazil, pp.117-124, August 1994.
M. Wheeler, R. Shoureshi, “Fuzzy Driver on a Handling Track,” ASME Winter Annual
Meeting, Special Publication No. G0909A, Vol.1, 1994.
R. Shoureshi, “Microprocessor-Based Electromechanical Systems, A First Step Toward
Mechatronics,” First Workshop on Mechatronics, Stanford University, July 1994.
J. Edwards, R. Shoureshi, "Object-Recognition Using Geometric Hashing," Proceedings
of IEEE Control and Decision Conference, December 1993.
M. Wheeler, R. Shoureshi, G.T. Heydt, R. Kramer, "Intelligent Power Generation
Control," ASME Winter Annual Meeting, November 1993.
R. Shoureshi, P. Meckl, "Teaching Microprocessors in the 90's and Beyond," ASME
Winter Annual Meeting, paper No. 93WA/DSC-ll, November 1993.
35
R. Chu, R. Shoureshi, "Neural-Based Identification of Continuous Nonlinear Systems,"
Proceedings of the 1993 American Control Conference, Vol. 2 pp. 1440-1449, pp. 1240-
1245 San Francisco, CA, June 1993.
P. Meckl, R. Shoureshi, "Laboratory Project in Semi-Active Vibration Control,"
Proceedings of the 1993 American Control Conference, Vol. 2, pp. 1240-1243, San
Francisco, CA, June 1993.
R. Shoureshi, P. Torcellini and K. Ramani, "Derivation and Implementation of Fuzzy
Optimal Climate Control, Proceedings of the American Control Conference, Vol. 2, pp.
1860-1869, San Francisco, CA, June 1993.
R. Shoureshi, S.R. Chu, "Hopfield-Based Adaptive State Estimators," Proceedings of the
IEEE 1993 International Conference on Neural Networks, pp. 1860-1865, San Francisco, CA, March 1993.
R. Shoureshi, R. Chu, "Hopfield-Based Adaptive Observers: Next Generation of
Luenberger State Estimators," Proceedings of the 12th IFAC World Congress, Vol. 9, pp.
359-362, Sydney, Australia, July 1993.
P. Meckl, R. Shoureshi, "Real-Time Microprocessor Control Laboratory," Proceedings of
the 12th IFAC World Congress, Vol. 9, pp. 155-158,Sydney, Australia, July 1993.
R. Shoureshi, L. Brackney, "Active Noise Control Using Self-Tuning Regulators," ASME
Book NO. G00737, pp. 121-125, November 1992.
S. Reynold Chu, R. Shoureshi, "Neural-Based Adaptive Nonlinear System Identification,"
DSC-Vol. 45, Intelligent Control Systems, ASME-WAM, pp. 55-62, November 1992
R. Shoureshi, P. Torcellini and K. Rahmani, "Intelligent Occupant Comfort Control
System," DSC-Vol. 45, Intelligent Control Systems, ASME-WAM, pp. 105-111,
November 1992.
R. Shoureshi, P. Meckl, "Control Education in the Era of Microprocessors," Proceedings
of the American Control Conference (ACC-1992), pp. 455-459, Chicago, IL, June 1992.
R. Shoureshi, P. T. Torcellini, M. G. Wheeler and R. A. Kramer, "Intelligent Control of Large Scale Systems" Proceedings of the American Control Conference (ACC-1992), pp.
1308-1312, Chicago, IL, June 1992.
R. Chu, R. Shoureshi, T. A. Healey, "A Hopfield-Based Neuro-Diagnostic System,"
Proceedings of the American Control Conference (ACC-1992), pp. 2629-2633, Chicago,
IL, June 1992.
S. R. Chu, R. Shoureshi, "Neural-Networks for Learning of Dynamical Systems,"
Proceedings of the International Conference on Engineering Applications of Mechanics,
Vol. 1, pp. 121-131, Tehran, June 1992.
36
M. Momot, R. Shoureshi, "Vision-Based Intelligent Control for Automated Robotic
Assembly," Proceedings of the International Conference on Engineering Applications of
Mechanics, Vol. 1, pp. 247-257, Tehran, June, 1992.
R. Shoureshi, L. Brackney, "Active Noise Control Using Self-Tuning Regulators,"
Proceedings of the International Conference on Engineering Applications of Mechanics,
Vol. 1, pp. 414, 426, Tehran, June 1992.
R. Shoureshi, "Active and Semi-Active Vehicle Vibration Control," Proceedings of the
International Conference on Engineering Applications of Mechanics, Vol. 2, pp. 169-182,
Tehran, June 1992.
R. Shoureshi, Y. Matsuyoshi, "Design and Implementation of Self-Turning Regulators for
Active Noise Control," Proceedings of ASME International Computers in Engineering Conference, Santa Clara, CA., August 1991.
M. Momot, R. Shoureshi, "Intelligent Dynamic Error Recovery for an Automated
Assembly Work Cell," Proceedings of the 13th IMACS World Congress, , Vol. 3, pp.
1368-1369, Dublin, Ireland, July 1991.
R. Chu, R. Shoureshi, "Identification of Dynamical Systems Using Neural Networks,"
Proceedings of the 13th IMACS World Congress, Vol. 3, pp. 1375-1376, Dublin, Ireland,
July 1991.
R. Shoureshi, N. Kubota, "Microprocessor-Based Control Systems: A First Step in
Teaching Mechatronics," Proceedings of the IFAC symposium on Advances in Control
Education, Boston, MA, June 1991.
R. Chu, R. Shoureshi, "A Neural Network Approach for Identification of Continuous-
Time Nonlinear Dynamic Systems," Proceedings of the 1991 American Control
Conference, pp. 1-6, Boston, MA, June 1991.
R. Shoureshi, T. Knurek, D. Novotny, "Electrically Controlled Intelligent Vehicle
Mounting System," Proceedings of the 25th International Symposium on Automotive
Technology and Automation (ISATA) , Florence, Italy, June 1991.
R. Shoureshi, T. Knurek, S. Scott, R. Pritchett, "Intelligent and Optimal Design of Body-
Engine Mounts Using CAD Technology," Proceedings of the 25th International Symposium on Automotive Technology and Automation (ISATA), Florence, Italy, June
1991.
R. Shoureshi, V. VanDoren, "An On-Line Parameter Estimation Technique for
Intermittent Systems," ASME paper #90-WA/DSC-26, November 1990.
R. Shoureshi, M. Momot, "Dynamic Error Recovery for an Automated Assembly
Workcell," ASME publication No. G00544, pp. 43-47, November 1990.
37
R. Shoureshi, N. Kubota and G.R. Batta, "A Modern Control Approach to Active Noise
Control," ASME publication No. G00550, pp. 167-175, November 1990.
R. Shoureshi, K. Rahmani, V. VanDoren, "Intelligent Building Control Systems," NSF
Workshop on Intelligent Structures, pp. 196-215, Taipei, Taiwan, July 1990.
R. Shoureshi, G.R. Batta, "Three-Dimensional Active Noise Control Using a Direct
Feedback Approach," Proceedings of the American Control Conference, pp. 2111-2113,
May 1990.
R. Shoureshi, "Learning and Decision-Making for Intelligent Control Systems,"
Proceedings of the American Control Conference, pp. 985-987, May 1990.
R. Shoureshi, R. Chu, "Neural Space Representation of Dynamical Systems," ASME
publication No. H00549, pp. 63-68, December 1989.
R. Shoureshi, K. Rahmani, "Intelligent Control of Building Systems," ASME publications
No. H00549, pp. 7-15, December 1989.
R. Chu, R. Shoureshi and M. Tenorio "Neural Networks for System Identification,"
Proceedings of the 1989 American Control Conference, pp. 916-921,
1989.
S. Bouchillon, R. Shoureshi, "Optimal Tuning of Adaptive Hydraulic Engine Mounts,"
Proceedings of the SAE Biannual Conference on Noise and Vibration, pp. 363-370, May
1989.
R. Shoureshi and J. Wagner, "Observer Designs for Diagnostics of Nonlinear Processes
and Systems," ASME paper #88-WA/DSC-5, November 1988.
F. Pourki and R. Shoureshi, "Stability of a Class of Distributed Parameter Systems with
Applications to MPD Thrusters," ASME Publication #G00462, pp. 189-194, November
1988.
R. Shoureshi, D. Swedes, and R. Evans, "Learning Control for Autonomous Machines,"
ASME Paper No. 88-WA/DSC-29, November 1988.
R. Shoureshi and J. Sorlie, "Eulerian Bond Graphs of Thermofluid Processes," ASME
Publication #G00460, pp. 33-40, November 1988.
F. Pourki and R. Shoureshi, "A Lyapunov Approach to Finite Order Control for
Stabilization of Distributed Parameter Systems," ASME Publication #G00462, pp. 45-50,
November 1988.
R. Evans and R. Shoureshi, "Interfacing and Control of GE-P50 Industrial Robot Using
Microcomputer," ASME Publication #G00463, pp. 445-456, November 1988.
38
R. Shoureshi, "Microprocessor-Based Data Acquisition and Control Systems,"
Proceedings of the IFAC Symposium on Trends in Control and Measurement, Swansea,
U.K., July 1988.
R. Shoureshi, F. Pourki, "Microprocessors for Measurement and Control," presented at
the American Control Conference (ACC-1988), June 1988.
R. Shoureshi, P.L. Graf, S. Bouchillon, T. Knurek, R.W. Stevens, "Open-Loop Versus
Closed-Loop Control for Hydraulic Engine Mounts," SAE Paper #880075,
1988.
P.L. Graf, Shoureshi, J. Starkey, D. Novtony, R.W. Stevens, "Active Frame Vibration Control for Automotive Vehicles with Hydraulic Engine Mounts," SAE Paper #880074,
1988.
R. Shoureshi, P. Brown, R. Evans, W. Stevenson, "An Optically Driven Learning Control
for Industrial Manipulators," Proceedings of the American Control Conference (ACC-
1988), pp. 614-619, 1988.
R. Shoureshi, M. D. Roesler, "Robust Control for Manipulators with Uncertain
Dynamics." Proceedings of the 10th World Congress of International Federation of
Automatic Control (IFAC),Vol. 88, pp. 358-363, Munich, Germany, July 1987.
R. Shoureshi, F. Pourki, "Controllability Analysis of Nonlinear Distributed Parameter
Systems," Proceedings of the American Control Conference (ACC-1987), pp. 880-886,
Minneapolis, MN, June 1987.
P.L. Graf, R. Shoureshi, "Gain-Sensitivity Augmentation for Near-Optimal Control of
Parameter-Dependent Plants," Proceedings of the American Control Conference (ACC-
1987),pp. 520-526, Minneapolis, MN, June 1987.
G. Batta, R. Shoureshi, "Adaptive Active Sound Attenuation in Ducts," presented at the
American Control Conference (ACC-1987), June 1987.
J. Wagner, R. Shoureshi, "A Robust Failure Diagnostic Scheme for Nonlinear
Thermofluid Processes," Proceedings of the American Control Conference (ACC-1987),
pp. 1877-1883, Minneapolis, MN, June 1987.
R. Shoureshi, T. Laudeman, M. Momot, "Expert Control System," presented at the
American Control Conference (ACC-1987), June 1987.
D.L. Mattern, R. Shoureshi, "Model Reference Adaptive Control - A Perspective,"
Proceedings of the American Control Conference (ACC-1987), pp. 201-207,
Minneapolis, MN, June 1987.
F. Pourki, R. Shoureshi, "Observability of Heat Transfer of MPD Thruster Electrodes,"
AIAA paper #87-1070, presented at the 19th AIAA/DGLR/JSASS International Electric
Propulsion Conference, May 1987.
39
R. Shoureshi, F. Pourki, S.N.B. Murthy, "An Approach to MPD Engine Instabilities,"
AIAA paper #87-0384, 1987.
P.L Graf, R. Shoureshi, R.W. Stevens, T.L. Houston, "On Implementation of Adaptive
Hydraulic Mounts," SAE paper #870634, 1987.
P.L. Graf, R. Shoureshi, "Modeling and Implementation of Semi-Active Hydraulic
Engine Mounts," ASME Paper 87-WA/DSC-28, 1987.
R. Shoureshi, R. Mitchell, R. Cipra, "Vision-Based Intelligent Control for Automated
Assembly," ASME publication #G00382, pp. 9-19, 1987.
R. Shoureshi, D. Carey, "Analytical and Experimental Evaluation of Electroacoustic
Transducers," ASME Paper 86-WA/DSC-9, December 1986.
J. Wagner, R. Shoureshi, "Observer Design and Failure Detection of Heat Pumps,"
ASME Paper 86-WA/DSC-11, December 1986.
J. Dohner, R. Shoureshi, R. Bernhard, "Dynamic Modeling of 3-Dimensional Sound
Propagation," ASME Paper 86-WA/NCA-18, December 1986.
R. Shoureshi, "Expert Systems and Their Applications," ASME Paper 86-WA/DSC-10,
December 1986.
R. Shoureshi, M. Roesler, M. Corless, "Control of Industrial Manipulators with Bounded
Uncertainties," Japan-U.S.A. Proceedings of the Symposium on Flexible Automation, pp.
61-68. Osaka, Japan, July 14-18, 1986.
R. Shoureshi, R. Hoskin, "Failure Detection and Isolation Using System Structure
Knowledge and Eigenvalue Sensitivity," Proceedings of the American Control
Conference, pp. 1933-1938, Seattle, WA, June 18-20, 1986.
R. Shoureshi, P. L. Graf, T. L. Houston, "Adaptive Hydraulic Engine Mounts," SAE
paper #860549, February 1986.
R. Shoureshi, K. McLaughlin, "Extended Linear Observer for a Nonlinear Thermofluid
System," ASME Publication # 85-G00320, pp. 169-274, November 1985.
R. Shoureshi, D. Carey, "Modeling and Control of Automatic Vehicle Steering System
Using Microprocessors," Proceedings of the 1985 IFAC/IFORS Conference on Control
Science and Technology for Development, pp. 1156-1167, Beijing, China, August 1985.
R. Shoureshi, K. McLaughlin, "Microprocessor-Based Failure Detection of Heat Pumps,"
Proceedings of the 1985 IFAC/IFORS Conference on Control Science and Technology
for Development, pp. 1188-1199, Beijing, China, August 1985.
40
R. Shoureshi, K. McLaughlin, "Application of Bond Graph to Thermofluid Processes and
Systems," Proceedings of the 1985 American Control Conference, pp. 595-600, Boston,
MA, June 1985.
H.M. Paynter, R. Shoureshi, "An Introduction to the Dynamics and Control of
Thermofluid Processes and Systems," Proceedings of the Symposium on the Dynamics
and Control of Thermofluid Processes and Systems, pp. 1-4, ASME Winter Annual
Meeting, New Orleans, December 1984.
R. Shoureshi and K. McLaughlin, "Observer Design for Dynamics, Control and Failure
Detection of Heat Pumps," Proceedings of the Symposium on the Dynamics and Control
of Thermofluid Processes and Systems, pp. 13-18, ASME Winter Annual Meeting, New
Orleans, December 1984.
R. Shoureshi, K. McLaughlin, "Modeling and Dynamics of Two-Phase Flow Heat
Exchangers Using Temperature-Entropy Bond Graphs," Proceedings of the American
Control Conference, pp. 93-98, San Diego, June 1984.
R. Shoureshi, "Dynamic Analysis and Failure Detection of HVAC Systems Using
Temperature-Entropy Bond Graphs," Invited paper for the American Society of Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE) Workshop on "HVAC Control
Modeling and Simulation," Paper #17, pp. 1-23 of Proceedings, Atlanta, Georgia, Feb. 2-
3, 1984.
R. Shoureshi, H. M. Paynter, "Simple Models for Dynamics and Control of Heat-
Exchangers," Proceedings of the American Control Conference (ACC-1983), pp. 1294-
1298, June 1983.
R. Shoureshi, K. McLaughlin, "Temperature-Entropy Bond Graph for Dynamics and
Control of Heat-Exchangers," Proceedings of the American Control Conference (ACC-
1983), pp. 1299-1304, June 1983.
R. Shoureshi, "General Method for Optimization of Stirling Engines," Proceedings of the
17th Intersociety Energy Conversion Engineering Conference, pp. 1688-1693, August
1982.
R. Shoureshi, "Simple Models for Analysis and Design of Practical Stirling Engines,"
Proceedings of the 17th Intersociety Energy Conversion Engineering Conference, pp. 1647-1652, August 1982.
R. Shoureshi, H. M. Paynter, J. L. Smith, Jr., "Low Temperature Stirling Engines for
Waste Heat Recovery," Proceedings of the 17th Intersociety Energy Conversion
Engineering Conference, pp. 1716-1721, August 1982.
XIII. Academic Activities
i. New York Institute of Technology
41
Provost and Vice President for Academic Affairs (2011 – Present)
Twenty Direct Reports from Campuses in New York and six other
countries
Chair several university committees
ii. University of Denver
Dean, School of Engineering and Computer Science (2003 – 2011)
Member of Academic Deans Council (2003 – 2011)
Member of Graduate Council (2003 – 2011)
Member of Undergraduate Council (2003 – 2011)
Member of Task Force for Development of an Aging Institute (2009 –
2011)
Member of the Provost Teaching Task Force (2006 – 2007)
Member of the Provost Scholarship Task Force (2006 – 2007)
Chair, Search Committee, Dean of the Korbel School of International
Studies (2009 – 2010)
Chair, Search Committee, Dean of the Daniels College of Business (2007
– 2008)
Member of the Provost search committee (2005 – 2006)
Member of the Dean Search Committee, Daniels College of Business
(2004 – 2005)
iii. Colorado School of Mines
Member of University Tenure & Promotion Committee
Member, CSM Presidential Search Committee
Chair, Faculty search for Power Electronics
Co-Chair of the search committee for Paden Distinguished Chair Professor
Publicized Engineering Systems graduate program at both national and
international functions
Engineering Graduate Committee
- Established a new "Engineering Colloquium Series" with Industrial
Speakers
- Chaired graduate committee and established policies and
procedures for Engineering Systems’ graduate program and
designed new forms for graduate studies. - Handled electronic inquiries of graduate student applications - Assisted in organizing doctoral qualifying exams
42
- Continued introduction of the concept and through my networks
invited highly ranked representatives from industry, national labs,
and government agencies to serve on the Engineering Corporate
Advisory Board (CAB).
Mentor for several junior faculty.
Hosted several industry and government visitors for potential
research collaborations with CSM.
Participated in several new faculty interview process
Formulated several cross-disciplinary projects within CSM
Participated and contributed to undergraduate curriculum reform
effort
Chairman of the CSM Academy, a school committee composed of
all CSM distinguished professors, appointed by the President and Vice
President, and devoted to define long-range plans or the future of
CSM.
Introduced and developed, monitoring and diagnostic concepts in
several courses, including EGGN 488, EGGN 588, MEL III, and
MACS 440.
Through NSF CRCD grant has developed new experiments for
MEL II and III to emphasize diagnostics and condition monitoring.
Initiated activities, correspondences and bids for proposals to the
GM Education Program for offering video-courses to GM engineers.
This successful initiative lead to the inclusion of CSM among the GM
Distance Learning Institutions.
Liaison between CSM and University Sao Paulo, Brazil to
establish a joint program.
Chairman of Graduate Committee, Engineering Division, CSM
(1994-1997)
XIV. Visiting Scholars, Post Docs and Students Supervision
i. Visiting Scholars
1. Chris Aasted, Harvard Children Hospital, 2011- present
2. Meydad, Korngold, The Nuclear Research Center, Negeve, Israel, 2006-2007
3. Boaz Kofman, The Nuclear Research Center, Negev, Israel, 2004 4. Ofer Braunshtein, The Nuclear Research Center, Negev, Israel, 2004
43
5. Sun-Wook Lim, Ph.D., 2003-present
6. Eli Dolev, Ph.D., 2003
7. Henry Li, Ph.D., 2002
8. Benny Surousi, Ph.D., 2001-2002
9. Ali Meghdari, Ph.D., 1999-2000
10. Susan Mccaffery, Ph.D., 1998-1999
11. Guilherme Nelson, Brazilian Electric Power, Research Council, CEPEL 1993-
1994. 12. Li Ping, Chinese Electric Power Research, 1992-1994. 13. Luiz A. Cardoso, Instituto de Pesquisas da Marinha, Brazil, 1994.
ii. Graduated Students, Their Research Topics and Graduation Dates
a. Graduated Ph.D. Students
1. Christopher Aasted, “Direct Brain Control of Artificial Limbs,” June 2013.
2. Virdi Permana, “Observability and Controllability of Nonlinear Large Scale
Thermal Systems,” June 2010.
3. Muneeb Chawala, “Adaptive Filtering for Ultra-High Speed Space Data
Acquisition,” August 2009.
4. Sun-Wook Lim, “Senory Guided Control of a Mobile Diagnostic Unit for ACSR
Transmission Lines,” Aug. 2003.
5. Amir Chaghajerdi, “Design and Control of Distributed Vibro-Acoustic
Actuators,” Dec. 2002.
6. Tormod Fretheim, “Fault Detection and Nonlinear Output Observer Design Using
Neural Network Models” Dec. 2000.
7. Zhi Hu, “Neuro-Fuzzy Short-Term Load Forecast and Generation Control in
Electric Power Systems,” August 2000.
8. Hanchu Li, “Neural-Based Power Generation Control for Transient Loads,”
December, 1997.
9. Mark Bell, “Combined Feedforward and Feedback Active Vibration Control for
Civil Structures,” Dec. 1997.
10. Goldino Alves, “Piezo-Based Active Adaptive Noise Control for Interior of
Automotive Vehicles,” Dec. 1997.
11. Matthew Wheeler, "Intelligent Control for Electric Power Generation Systems,"
May 1994.
12. Larry Brackney, "Active Noise Control of Jet Engines," December 1994.
44
13. S. Reynold Chu, "Neural Networks for System Identification and State
Observation of Dynamical Systems," August, 1992.
14. Michael Momot, "Intelligent Control for Automated Assembly Cell," May, 1992.
15. Karim Rahmani, "Expert Control Systems for Intelligent Buildings," August,
1992.
16. Paul Torcellini, "Expert Systems for Optimum Operation of Building Systems,"
December, 1992.
17. Vance VanDoren, "The ILS Parameter Estimation Technique for Intermittent
Systems with Applications to Intelligent Building Control," October, 1990.
18. George Batta, "Real-Time Adaptive Active Control of Sound Fields," September,
1990.
19. John Wagner, "Observability and Controllability of Nonlinear Processes with
Applications in Failure Detection," May, 1989.
20. Forouza Pourki, "Stabilization and Control Analysis of Distributed Parameter
Systems," Dec. 1988.
21. Peter Graf, "Electronically Controlled Adaptive Engine Mounts," August, 1987.
22. Jeffrey Dohner, "Controllability and Dynamic Modeling of Three-Dimensional
Noise Propagation," August, 1987.
23. Duane Mattern, "Model Reference Adaptive Control of Power Plants," May,
1987.
b. Graduated M.S. Students with Thesis
24. Tracy Schantz, “Feature-Based Neuro-Symbolic Networks for Global
Diagnostics,” June 2012.
25. Susan Muller, “Control Design for an Adaptive Cast,” June 2010.
26. Faisal Kamal, “Design of Solar Powered Systems for Green Buildings,” August
2008.
27. Marvan Eslami, “Design of Wind Turbines for Desert Applications,” December
2008.
28. Mio Jang, “Energy Harvesting from Kinetic Motion,” December 2008.
29. Chis Aasted, “Optical Non-Invasive Brain Imaging,” Dec. 2007
45
30. Eric Hansen, “Wireless Telemetric Knee,” Dec. 2004
31. Tim Norick, “Intelligent Substation,” Jan. 2004
32. Virdi Permana, “Optimal Control of Combined Heat and Power Systems”, Nov.,
2003.
33. Kim Anderson, “Sensory Augmentation for Diabetic Patients,” May 2003.
34. David Mach, “Design Enhancements for Knee Implants,” Dec. 2002.
35. Neil Flock, “Enhancement of Voice Activated System Using Smart Larynex,”
May 2003.
36. Cody O’neil, “Signature Analysis for Health Assessment of Transmission Lines,”
Dec. 2002.
37. Dan Flaherty, “Intelligent Control of Highly Varying Loads,” May 2003.
38. Robert Woods, “Optical-Based Sensor for Diagnostics of Transformers,” Dec.
2003.
39. Mark Dace, “Design of a Telemetric Patella,” Dec. 2001.
40. Kwok-man Wong, “Semi-Active Structural Vibration Control,” Dec. 2001
41. Benjamin Hoffner,”Optimal Load Dispatch in the Presence of HVL,” Dec. 2001.
42. Todd Langer, “Design of a Mobile Fluoroscopic Unit,” Dec. 2001.
43. William Hodges, “EMAT-Based Diagnostics for ACSR Transmission Lines,”
Dec. 2000.
44. Tim Romig, “Fuzzy Controller for Diabetic Sensory Augmentation,” May 2000.
45. Xianghue Wang, “Optical-Fiber Monitor for Health Assessment of High Voltage
Transformers,” Dec. 1999.
46. Brumley, Jamey, “Dynamic Modeling of Spine Motion With and Without
Implants,” Dec. 1999.
47. Benjamin Terry, “Intelligent Diagnosis for Remote Monitoring,” Aug. 1999.
48. Andy Ottele, “Hopfeild-Based Neuro-Diagnostics for Substation Equipment”,
Aug. 1998.
49. Brenda Jacobs, “Distributed Control for Substation Diagnostic,” Aug. 1998.
46
50. Mike Chenoweth, “Health Assessment of Electrical Grid Ground Risers,” May
1998.
51. Douglas Cook, “Optimal Dispatch for Electric Power Generation,” May 1998.
52. Bruce DeRoo, “Co-located Sensor/Actuator for Active Noise Control Using
Piezo Ceramics,” May 1997.
53. Ray Hemlic, “Neural-Based Control of Turbo-machinery,” Aug. 1997.
54. Josef Dvorak, “Neural-Based Diagnostics of Transformers,” May 1997.
55. Chad Fisher, “Optical Communications in Substations,” May 1997.
56. Susan Henderson, “Light Absorption Spectroscopy for Diagnostics of Oil-Filed
Transformers,” Dec. 1997.
57. David High, "Neural-Based Control of Multiple Robots for Automated
Assembly," December 1994.
58. Stephenie Goerges, "Fuzzy Control and Diagnostics of Complex Mechanical
Systems," December 1995.
59. Cavit, Kubali, "Intelligent Assembly System," December 1993.
60. Jeffrey Edwards, "Neural-Based Vision Processing for Automated Fixturing and
Assembly," December 1993.
61. Rachelle Lojovich, "Neural Network Implementation of Optimal Controllers,"
December 1993.
62. Michael Priebe, "Self-Tuning Regulator for High, Precision Machining Using
Electrohydraulic Stepper Motors," August 1993.
63. David Swedes, "Knowledge-Based Learning Control for Automated Assembly,"
December 1990.
64. Raj Deol, "One-Line Auto-Tuning of Adaptive Engine Mounts," December, 1990.
65. Noriyuki Kubota, "Self-tuning Regulator for Active Noise Cancellation,"
December 1990.
66. Barbara Dubrovin, "Design of the Active Adaptive Assembly Table," MSME,
August, 1990.
67. Laura Stallard, "Model Based Expert System for Failure Detection and
Identification of Household Refrigerators," August, 1989.
47
68. Jeff Wolfert, "Learning Scheme for On-Line Modeling of Flexible Systems,"
October, 1989.
69. Scott Bouchillon, "Actuator Design and Control Synthesis for Adaptive Engine
Mounts," May, 1989.
70. Paul Brown, "Optical Learning Control for Industrial Manipulators," MSME,
May, 1988.
71. Jim Sorlie, "Bond Graph for Thermofluid Systems," MSME, May, 1988.
72. Michael Momot, "Control of Manipulators with Uncertainties," MSME, May,
1987.
73. Candace Suriano, "Data Acquisitions for Vibration Control Systems," MSME,
December, 1986.
74. Jesse Jones, "Microprocessor-Based Controller for HVAC Systems," MSME,
May, 1986.
75. David Carey, "Dynamic Modeling and Control Design of Passive and Active
Electro-magneto-Acoustic Transducers," MSME, February, 1986.
76. Maribeth Roesler, "Feedback Control of Nonlinear Uncertain Dynamic Systems
with Applications to Industrial Manipulators," MSME, February, 1986.
77. Robert Hoskin, "A New Approach to Failure Detection and Isolation with
Applications to Aircraft Engines," MSME, December, 1985.
78. Ronald Perez, "Microprocessor-Based Adaptive Control for Active Attenuation of
Sound in Duct Flows," MSME, December, 1985.
79. Kevin McLaughlin, "Temperature-Entropy Band Graphs for Dynamics and
Control of Refrigerators," MSME, February, 1985.
80. Teresa Laudeman, "Machine Learning for Intelligent Manufacturing Systems,"
MSME, August, 1985.
81. Celeste Chippero, “Automotive NVH Design,” December, 1985
82. John Hibner, “Active Automotive Engine Mounts,” May, 1985.
iii. Current Students Performing Research, Topics and Expected Graduation Dates
83. Ma Lu, “Human Interface for Direct Brain Control of Objects,” to be completed in
June 2015.
iv. B.S. Students (Senior Projects)
48
84. Carolyn S. Mattick, "Neural-Based Image Processing," May 1994.
85. Stephanie L. Goerges, "Computer-Aided Optimal Vehicle Suspension Design,"
December 1993.
86. Mark P. Schoenegge, "Automated Fixturing Using Vision Feedback," August 1993.
87. Sarah Guggemos, "Occupancy Patterns Using Motion Sensors," May 1993.
88. Scott Huth, "Adaptive Flexible Fixturing," December 1992.
89. Robert Harris, "Optical-Based 3-D Object Identification," December 1992.
90. Kirt Chapman, "Optical Tactile Sensor for Object Recognition," December 1992.
91. Jin Won Lee, "Modeling of Steam Power Plants," May 1992.
92. Michael Flaherty, "Control of Hydro-Pneumatic Actuators," May 1991.
93. Ken Lazzaro, "Analysis of Boiler Systems," May 1991.
94. Byran Schueler, "Modeling of HVAC Equipment," May 1991.
95. John Sergo, "Modeling of Electric Power Systems," December 1990.
96. Robert Casey, "Design and Construction of a Three Finger Gripper," December,
1988.
97. Carmen Crum, "Analysis and Design of a Robotic Gripper," December, 1988.
98. David Swedes, Jr., "Actuator Design for Adaptive Engine Mounts," May, 1988.
99. Ronald Mason, "Control of Variable Expansion Valve," May, 1986.
100. Nader Motamedi, "Control of HVAC Systems," May, 1986.
XV. External Activities
A. Consulting Activities
2001 - 2008: Nisource Energy Technology, Inc.
2001 - 2005: Bismark State College
1991 – 2011: Hill Rom Corporation
49
1994-2000: Chief Technical Advisor, Cooper-Standard Automotives.
1990- 1992: GenCorp, working on process control of fiber reinforced composites in
SMC production line, and active noise cancellation in factory environment.
1986-1994: Consultant for Cooper Industrial Products, working on development of a
CAD based optimal design of vehicle mounting system.
1991- 1992: Jet Propulsion Laboratory, Cal Tech, working on the development of space
autonomous vehicles.
1990: Johnson Controls Inc., worked on diagnostics for rotating machinery.
1986-1988: Kohler Company, worked on modeling and stability analysis of a speed
governor for portable generators. A mathematical model describing transient behavior of
the controlled system was derived and analyzed.
1987-1989: Teledyne Ryan Electronics Incorporated, worked on fiber optic sensor
system for aircraft engines manufactured by Allison Gas Turbine.
1982-1983: Ford Motor Company, Representative of Mechanical Engineering
Department of Wayne State University for developing a retraining program and a new
interdisciplinary master program for Ford engineers, entitled "Electronics and Computer Control Systems".
1981-1982: Mystersky Power Plant, performed failure diagnostics on high-pressure
turbine.