bioconcept dental implants catalog 2012
DESCRIPTION
Bioconcpet Dental Implant SystemPRODUCT CATALOGTRANSCRIPT
PRODUCT CATALOG
BIOCONCEPT CO.,LTD
Add:6th Floor, Unit B, Tian an Industry Park, Xinbei Zone,Changzhou, Jiangsu, China (213022)Tel:+86-519-85172266Fax:+86-519-85172299www.bioconcept.cn
0197
Dental Implant System
www.bioconcept.cn
BIOCONCEPT CO.,LTD
Add:6th Floor, Unit B, Tian an Industry Park, Xinbei Zone,Changzhou, Jiangsu, China (213022)Tel:+86-519-85172266Fax:+86-519-85172299www.bioconcept.cn
PRODUCT CATALOG
1
Standard Implants Φ 3.3 mm (Regular Neck Φ 4.8 mm)
Standard Implants Φ 4.1mm (Regular Neck Φ 4.8 mm)
Standard Implants Φ 4.8 mm (Regular Neck Φ 4.8 mm)
Standard Implants Φ 4.8 mm (Wide Neck Φ 6.5 mm)
Standard Plus Implants Φ 3.3 mm (Narrow Neck Φ 3.5 mm)
Standard Plus Implants Φ 3.3 mm (Regular Neck Φ 4.8 mm)
Standard Plus Implants Φ 4.1 mm (Regular Neck Φ 4.8 mm)
Standard Plus Implants Φ 4.8 mm (Regular Neck Φ 4.8 mm)
Standard Plus Implants Φ 4.8 mm (Wide Neck Φ 6.5 mm)
Tapered Effect Implants Φ 3.3 mm (Regular Neck Φ 4.8 mm)
Tapered Effect Implants Φ 4.1 mm (Regular Neck Φ 4.8 mm)
Tapered Effect Implants Φ 4.8 mm (Wide Neck Φ 6.5 mm)
Surgical Planning Aids
Auxiliary Instruments
Surgical Cassette
Overview of Surgical Instruments for Standard and Standard Plus Implants
Overview of Surgical Instruments for Tapered Effect Implants
Surgical Instruments For Standard and Standard Plus Implants, endosteal Φ 3.3 mm
Surgical Instruments For Standard and Standard Plus Implants, endosteal Φ 4.1 mm
Surgical Instruments For Standard and Standard Plus Implants, endosteal Φ 4.8 mm
Surgical Instruments For Tapered Effect Implants, endosteal Φ 3.3 mm
Surgical Instruments For Tapered Effect Implants, endosteal Φ 4.1 mm
Surgical Instruments For Tapered Effect Implants, endosteal Φ 4.8 mm
Crowns and Bridges, Prosthetic System (Narrow Neck Φ3.5mm )
Crowns and Bridges, Prosthetic System (Regular Neck Φ4.8mm )
Crowns and Bridges, Prosthetic System (Wide Neck Φ6.5mm )
Hybrid Dentures (Regular Neck Φ4.8mm )
Crowns and Bridges, Solid Abutment Prosthetic System (Regular Neck Φ4.8mm )
Crowns and Bridges, Solid Abutment Prosthetic System (Wide Neck Φ6.5mm )
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
29
30
31
32
33Components for screw and cement-retained crowns and bridge
PRODUCT CATALOG
013010
013020
013030
013040
013050
B 48/28/33/8
B 48/28/33/10
B 48/28/33/12
B 48/28/33/14
B 48/28/33/16
022010
022020
022030
022040
022050
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
4.8mm
2.8mm
S-L-A
3.3mm
2.8mm
Standard Implants 3.3 mm (Regular Neck 4.8 mm) Φ Φ
P/N Product Description Material Size
Standard Implant, Φ3.3mm RN, S-L-A 8mm
Standard Implant, Φ3.3mm RN, S-L-A 10mm
Standard Implant, Φ3.3mm RN, S-L-A 12mm
Standard Implant, Φ3.3mm RN, S-L-A 14mm
Standard Implant, Φ3.3mm RN, S-L-A 16mm
Titanium
Titanium
Titanium
Titanium
Titanium
Closure screws and healing caps
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Profile
Head Diameter
Neck Height
Surface
4.8mm
2.8mm
S-L-A
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications Standard implants 3.3 mm RN are an alternative in the case of a minimal ridge width of 5.5 mm and a minimal mesio-distal gap width between adjacent teeth of 7 mm. Due to their lower mechanical strength, compared to Φ 4.1 mm implants, these implants should be used exclusively for the following indications: Edentulous jaw: 4 implants S/SP Φ3.3 mm RN in conjunction with a bar construction Partially edentulous jaw: In the case of fixed reconstruction, combined with Φ 4.1 mm implants and splinted with a superstructure
Important: As a general rule, always use the largest possible implant diameter.
Φ
2
PRODUCT CATALOG PRODUCT CATALOG
3 4
013060
013070
013080
013090
013100
013110
B 48/28/41/6
B 48/28/41/8
B 48/28/41/10
B 48/28/41/12
B 48/28/41/14
B 48/28/41/16
022010
022020
022030
022040
022050
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
013120
013130
013140
013150
013160
B 48/28/48/6
B 48/28/48/8
B 48/28/48/10
B 48/28/48/12
B 48/28/48/14
022010
022020
022030
022040
022050
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
P/N Product Description Material SizeP/N Product Description Material Size
Profile
Head Diameter
Neck Height
Surface
4.8mm
2.8mm
S-L-A
Standard Implants 4.1 mm (Regular Neck 4.8 mm) Φ Φ
4.8mm
2.8mm
S-L-A
4.1mm
3.5mm
Profile
Head Diameter
Neck Height
Surface
4.8mm
2.8mm
S-L-A
Standard Implant, Φ4.1mm RN, S-L-A 6mm*
Standard Implant, Φ4.1mm RN, S-L-A 8mm
Standard Implant, Φ4.1mm RN, S-L-A 10mm
Standard Implant, Φ4.1mm RN, S-L-A 12mm
Standard Implant, Φ4.1mm RN, S-L-A 14mm
Standard Implant, Φ4.1mm RN, S-L-A 16mm
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium Alloy
Ttanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Closure screws and healing caps
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications Standard implants 4.1 mm RN can be used for oral endosteal implant indications in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with a minimal ridge width of 6 mm and a minimal mesio-distal gap width between adjacent teeth of 7 mm.
*Indication S-L-A 6 mm Because of the reduced surface area for anchorage in the bone, these implants are to be used solely for the following indications: As an additional implant together with longer implants to support implant-borne reconstructions. As an auxiliary implant for implant-borne bar constructions supporting full dentures in a seriously atrophied mandible.
Φ
Standard Implants 4.8 mm (Regular Neck 4.8 mm) Φ Φ
4.8mm
2.8mm
S-L-A
4.8mm
4.2mm
Standard Implant, Φ4.8mm RN, S-L-A 6mm*
Standard Implant, Φ4.8mm RN, S-L-A 8mm
Standard Implant, Φ4.8mm RN, S-L-A 10mm
Standard Implant, Φ4.8mm RN, S-L-A 12mm
Standard Implant, Φ4.8mm RN, S-L-A 14mm
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Closure screws and healing caps
RN Closure screw,
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications Standard implants 4.8 mm RN can be used for oral endosteal implant indications in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with a minimal ridge width of 7 mm and a minimal mesio-distal gap width between adjacent teeth of 7 mm.
*Indication S-L-A 6 mm Because of the reduced surface area for anchorage in the bone, these implants are to be used solely for the following indications: As an additional implant together with longer implants to support implant-borne reconstructions. As an auxiliary implant for implant-borne bar constructions supporting full dentures in a seriously atrophied mandible.
Φ
PRODUCT CATALOG PRODUCT CATALOG
Profile
Head Diameter
Neck Height
Surface
3.5mm
1.8mm
S-L-A
Standard Implants 4.8 mm (Wide Neck 6.5 mm) Φ Φ
Profile
Head Diameter
Neck Height
Surface
6.5mm
2.8mm
S-L-A
Standard Plus Implants 3.3 mm (Narrow Neck 3.5 mm) Φ Φ
013170
013180
013190
013200
B 65/28/48/6
B 65/28/48/8
B 65/28/48/10
B 65/28/48/12
023010
023020
023030
023040
023050
F 6.5
B 6.5-2
B 6.5-3
B 6.5-4.5
X 6.5-2
6.5mm
2.8mm
S-L-A
4.8mm
4.2mm
3.5mm
1.8mm
S-L-A
3.3mm
2.8mm
011010
011020
011030
011040
Z 35/18/33/8
Z 35/18/33/10
Z 35/18/33/12
Z 35/18/33/14
*021010
021020
021030
F 3.5
B 3.5-3.4
X 3.5-3.4
P/N Product Description Material SizeP/N Product Description Material Size
Titanium
Titanium
Titanium
Titanium
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Standard Implant, Φ4.8mm WN, S-L-A 6mm*
Standard Implant, Φ4.8mm WN, S-L-A 8mm
Standard Implant, Φ4.8mm WN, S-L-A 10mm
Standard Implant, Φ4.8mm WN, S-L-A 12mm
WN Closure screw
WN Healing cap, height 2.0 mm
WN Healing cap, height 3.0 mm
WH Healing cap, height 4.5 mm
WN Healing cap, labial bevel, height 2.0 mm
Closure screws and healing caps
S-L-A = Sand-blasted, Large grit, Acid-etched WN = Wide Neck
Indications Standard implants 4.8 mm WN can be used for oral endosteal implant indications in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with a minimal ridge width of 7 mm and a minimal mesio-distal gap width between adjacent teeth of 8.5 mm.
*Indication S-L-A 6 mm Because of the reduced surface area for anchorage in the bone, these implants are to be used solely for the following indications: As an additional implant together with longer implants to support implant-borne reconstructions. As an auxiliary implant for implant-borne bar constructions supporting full dentures in a seriously atrophied mandible.
Φ
Titanium
Titanium
Titanium
Titanium
Titanium Alloy
Titanium Alloy
Titanium Alloy
Standard Plus Implant, Φ3.3mm NN, S-L-A 8mm
Standard Plus Implant, Φ3.3mm NN, S-L-A 10mm
Standard Plus Implant, Φ3.3mm NN, S-L-A 12mm
Standard Plus Implant, Φ3.3mm NN, S-L-A 14mm
Closure screws and healing caps
NN Closure screw with hex socket*, height 1.8 mm
NN Protective cap with integral occlusal screw, height 3.4 mm
NN Healing cap with integral occlusal screw, height 3.4 mm
S-L-A = Sand-blasted, Large grit, Acid-etched NN = Narrow Neck * Requires hexagonal screwdriver
Indications Standard Plus implants Φ3.3 mm NN are small one-part implants for narrow interdental spaces and ridges with a minimal ridge width of 5.5 mm and a minimal mesio-distal gap width between adjacent teeth of 5.5 mm. As a general rule, always use the largest possible implant diameter.
Caution Placement in the molar region is not recommended.
5 6
PRODUCT CATALOG PRODUCT CATALOG
012010
012020
012030
012040
012050
012060
012070
012080
012090
B 48/18/33/8
B 48/18/33/10
B 48/18/33/12
B 48/18/33/14
B 48/18/41/6
B 48/18/41/8
B 48/18/41/10
B 48/18/41/12
B 48/18/41/14
022010
022020
022030
022040
022050
022060
022070
022010
022020
022030
022040
022050
022060
022070
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
X 4.8-2
X 4.8-3.5
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
X 4.8-2
X 4.8-3.5
Profile
Head Diameter
Neck Height
Surface
4.8mm
1.8mm
S-L-A
Standard Plus Implants 3.3 mm (Regular Neck 4.8 mm) Φ Φ
Profile
Head Diameter
Neck Height
Surface
4.8mm
1.8mm
S-L-A
Standard Plus Implants 4.1 mm (Regular Neck 4.8 mm) Φ Φ
4.8mm
1.8mm
S-L-A
3.3mm
2.8mm
4.8mm
1.8mm
S-L-A
4.1mm
3.5mm
Standard Plus Implant, Φ3.3mm RN, S-L-A 8mm
Standard Plus Implant, Φ3.3mm RN, S-L-A 10mm
Standard Plus Implant, Φ3.3mm RN, S-L-A 12mm
Standard Plus Implant, Φ3.3mm RN, S-L-A 14mm
P/N Product Description Material SizeP/N Product Description Material Size
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Closure screws and healing caps
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
RN Healing cap, labial bevel, small, height 2.0 mm
RN Healing cap, labial bevel, large, height 3.5 mm
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications The smooth neck section of Standard Plus implants is 1 mm shorter than with Standard implants. Standard Plus implants are particularly suitable for use in the esthetic region. The implant shoulder should be positioned about 1 mm apical to the cemento-enamel junction (CEJ) of the contralateral tooth or 2 mm subgingival of the prospective gingival margin. Standard Plus implants Φ3.3 mm RN have the same indications as Standard implants Φ3.3 mm, RN (see page 2).
Important: As a general rule, always use the largest possible implant diameter.
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Standard Plus Implant, Φ4.1mm RN, S-L-A 6mm
Standard Plus Implant, Φ4.1mm RN, S-L-A 8mm
Standard Plus Implant, Φ4.1mm RN, S-L-A 10mm
Standard Plus Implant, Φ4.1mm RN, S-L-A 12mm
Standard Plus Implant, Φ4.1mm RN, S-L-A 14mm
Closure screws and healing caps
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
RN Healing cap, labial bevel, small, height 2.0 mm
RN Healing cap, labial bevel, large, height 3.5 mm
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications The smooth neck section of Standard Plus implants is 1 mm shorter than with Standard implants. Standard Plus implants are particularly suitable for use in the esthetic region. The implant shoulder should be positioned about 1 mm apical to the cemento-enamel junction (CEJ) of the contralateral tooth or 2 mm subgingival of the prospective gingival margin. Standard Plus implants Φ 4.1 mm RN have the same indications as Standard implants Φ4.1 mm, RN (see page 3).
*Indication S-L-A 6 mm Due to the reduced surface area for anchorage in the bone, these implants are to be used solely for the following indications: As an additional implant together with longer implants to support implant-borne reconstructions. As an auxiliary implant for implant-borne bar constructions supporting full dentures in a seriously atrophied mandible.
7 8
PRODUCT CATALOG PRODUCT CATALOG
Profile
Head Diameter
Neck Height
Surface
6.5mm
1.8mm
S-L-A
Standard Plus Implants 4.8 mm (Regular Neck 4.8 mm) Φ Φ
Profile
Head Diameter
Neck Height
Surface
4.8mm
1.8mm
S-L-A
Standard Plus Implants 4.8 mm (Wide Neck 6.5 mm) Φ Φ
012100
012110
012120
012130
012140
012150
012160
012170
012180
B 48/18/48/6
B 48/18/48/8
B 48/18/48/10
B 48/18/48/12
B 48/18/48/14
B 65/18/48/6
B 65/18/48/8
B 65/18/48/10
B 65/18/48/12
022010
022020
022030
022040
022050
022060
022070
023010
023020
023030
023040
023050
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
X 4.8-2
X 4.8-3.5
F 6.5
B 6.5-2
B 6.5-3
B 6.5-4.5
X 6.5-2
4.8mm
1.8mm
S-L-A
4.8mm
4.2mm
P/N Product Description Material SizeP/N Product Description Material Size
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Standard Plus Implant, Φ4.8mm RN, S-L-A 6mm
Standard Plus Implant, Φ4.8mm RN, S-L-A 8mm
Standard Plus Implant, Φ4.8mm RN, S-L-A 10mm
Standard Plus Implant, Φ4.8mm RN, S-L-A 12mm
Standard Plus Implant, Φ4.8mm RN, S-L-A 14mm
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
RN Healing cap, labial bevel, small, height 2.0 mm
RN Healing cap, labial bevel, large, height 3.5 mm
Closure screws and healing caps
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications The smooth neck section of Standard Plus implants is 1 mm shorter than with Standard implants. Standard Plus implants are particularly suitable for use in the esthetic region. The implant shoulder should be positioned about 1 mm apical to the cemento-enamel junction (CEJ) of the contralateral tooth or 2 mm subgingival of the prospective gingival margin. Standard Plus implants Φ4.8 mm RN have the same indications as Standard implants Φ4.8 mm, RN (see page 4).
*Indication S-L-A 6 mm Due to the reduced surface area for anchorage in the bone, these implants are to be used solely for the following indications: As an additional implant together with longer implants to support implant-borne reconstructions. As an auxiliary implant for implant-borne bar constructions supporting full dentures in a seriously atrophied mandible.
6.5mm
1.8mm
4.8mm
4.2mm
S-L-A
Standard Plus Implant, Φ4.8mm WN, S-L-A 6mm*
Standard Plus Implant, Φ4.8mm WN, S-L-A 8mm
Standard Plus Implant, Φ4.8mm WN, S-L-A 10mm
Standard Plus Implant, Φ4.8mm WN, S-L-A 12mm
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
WN Closure screw
WN Healing cap, height 2.0 mm
WN Healing cap, height 3.0 mm
WH Healing cap, height 4.5 mm
WN Healing cap, labial bevel, height 2.0 mm
S-L-A = Sand-blasted, Large grit, Acid-etched WN = Wide Neck
Indications The smooth neck section of Standard Plus implants is 1 mm shorter than with Standard implants. Standard Plus implants are particularly suitable for use in the esthetic region. The implant shoulder should be positioned about 1 mm apical to the cemento-enamel junction (CEJ) of the contralateral tooth or 2 mm subgingival of the prospective gingival margin. Standard Plus implants Φ4.8 mm WN have the same indications as Standard implants Φ4.8 mm, WN (see page 5).
*Indication S-L-A 6 mm Due to the reduced surface area for anchorage in the bone, these implants are to be used solely for the following indications: As an additional implant together with longer implants to support implant-borne reconstructions. As an auxiliary implant for implant-borne bar constructions supporting full dentures in a seriously atrophied mandible.
Closure screws and healing caps
9 10
PRODUCT CATALOG PRODUCT CATALOG
014010
014020
014030
014040
014050
014060
014070
014080
J 48/18/33/8
J 48/18/33/10
J 48/18/33/12
J 48/18/33/14
J 48/18/41/8
J 48/18/41/10
J 48/18/41/12
J 48/18/41/14
022010
022020
022030
022040
022050
022060
022070
022010
022020
022030
022040
022050
022060
022070
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
X 4.8-2
X 4.8-3.5
F 4.8
B 4.8-1.5
B 4.8-2
B 4.8-3
B 4.8-4.5
X 4.8-2
X 4.8-3.5
Profile
Head Diameter
Neck Height
Surface
4.8mm
1.8mm
S-L-A
Tapered Effect Implants 3.3 mm (Regular Neck 4.8 mm) Φ Φ
Profile
Head Diameter
Neck Height
Surface
4.8mm
1.8mm
S-L-A
Tapered Effect Implants 4.1 mm (Regular Neck 4.8 mm) Φ Φ
4.8mm
1.8mm
S-L-A
3.3mm
2.8mm
4.8mm
1.8mm
4.1mm
3.5mm
S-L-A
P/N Product Description Material SizeP/N Product Description Material Size
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Tapered Effect Implant, Φ3.3mm RN, S-L-A 8mm
Tapered Effect Implant, Φ3.3mm RN, S-L-A 10mm
Tapered Effect Implant, Φ3.3mm RN, S-L-A 12mm
Tapered Effect Implant, Φ3.3mm RN, S-L-A 14mm
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
RN Healing cap, labial bevel, small, height 2.0 mm
RN Healing cap, labial bevel, large, height 3.5 mm
Closure screws and healing caps
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications Tapered Effect implants 3.3 mm RN can be used for oral endosteal implant indications in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with a minimal ridge width of 7 mm and a minimal mesio-distal gap width between adjacent teeth of 7 mm.
Φ
Tapered Effect Implant, Φ4.1mm RN, S-L-A 8mm
Tapered Effect Implant, Φ4.1mm RN, S-L-A 10mm
Tapered Effect Implant, Φ4.1mm RN, S-L-A 12mm
Tapered Effect Implant, Φ4.1mm RN, S-L-A 14mm
Closure screws and healing caps
RN Closure screw, small
RN Closure screw, large, height 1.5 mm
RN Healing cap, height 2.0 mm
RN Healing cap, height 3.0 mm
RN Healing cap, height 4.5 mm
RN Healing cap, labial bevel, small, height 2.0 mm
RN Healing cap, labial bevel, large, height 3.5 mm
S-L-A = Sand-blasted, Large grit, Acid-etched RN = Regular Neck
Indications Tapered Effect implants 4.1 mm RN can be used for oral endosteal implant indications in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with a minimal ridge width of 7 mm and a minimal mesio-distal gap width between adjacent teeth of 7 mm.
Φ
11 12
PRODUCT CATALOG PRODUCT CATALOG
Tapered Effect Implants 4.8 mm (Wide Neck 6.5 mm) Φ Φ
Profile
Head Diameter
Neck Height
Surface
6.5mm
1.8mm
S-L-A
Surgical Planning Aids
014090
014100
014110
J 65/18/48/10
J 65/18/48/12
J 65/18/48/14
023010
023020
023030
023040
023050
F 6.5
B 6.5-2
B 6.5-3
B 6.5-4.5
X 6.5-2
6.5mm
1.8mm
S-L-A
4.8mm
4.2mm
P/N Product Description Material Size
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium
Titanium
Titanium
Tapered Effect Implant, Φ4.8mm WN, S-L-A 10mm
Tapered Effect Implant, Φ4.8mm WN, S-L-A 12mm
Tapered Effect Implant, Φ4.8mm WN, S-L-A 14mm
WN Closure screw
WN Healing cap, height 2.0 mm
WN Healing cap, height 3.0 mm
WN Healing cap, height 4.5 mm
WN Healing cap, labial bevel, height 2.0 mm
Closure screws and healing caps
S-L-A = Sand-blasted, Large grit, Acid-etched WN = Wide Neck
Indications Tapered Effect implants 4.8 mm WH can be used for oral endosteal implant indications in the maxilla and mandible, for functional and esthetic rehabilitation of edentulous patients with a minimal ridge width of 8.5 mm and a minimal mesio-distal gap width between adjacent teeth of 8.5 mm.
Φ
053050
053060
65×33
100
P/N Product Description Material Size
Titanium Alloy
Titanium Alloy Standard, Standard Plus and Tapered
Effect implant distance indicator
Diagnostic T
13 14
PRODUCT CATALOG PRODUCT CATALOG
Auxiliary Instruments Auxiliary Instruments
056060
056070
055100
055120
055110
056020
055010
055020
055030
055040
055050
055060
L155
L115
84
50
82
85
IR11
IR18
IR28
IH19
IH26
IH34
P/N Product Description Material Size
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
stainless steel
Stainless Steel
054010
054020
054030
054040
054050
054060
CR15
CR21
CR27
CH20
CH26
CH 32
Screwdrivers
P/N Product Description Material Size
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
SCS = Screw Carrying System
The SCS screwdrivers also act as inserting instruments for the WN Solid abutments, for all abutments, for all prosthetic components as well as for all closure screws and healing caps in the Bioconcept Dental Implant System.
15 16
Instrument tweezers
Tweezers with titanium
Ratchet
Service instrument for ratchet
Torque control device for ratchet
Holding key
Adapter for ratchet, extra short,
Adapter for ratchet, short
Adapter for ratchet, long
Adapter for handpiece, extra short
Adapter for handpiece, short
Adapter for handpiece, long
Length 11mm
Length 18mm
Length 28mm
Length 19mm
Length 26mm
Length 34mm
SCS Screwdriver for ratchet, extra short
SCS Screwdriver for ratchet, short
SCS Screwdriver for ratchet, long
SCS Screwdriver for handpiece, extra short
SCS Screwdriver for handpiece, short
SCS Screwdriver for handpiece, long
Length 15mm
Length 21mm
Length 27mm
Length 20mm
Length 26mm
Length 32mm
PRODUCT CATALOG PRODUCT CATALOG
Surgical Cassette Overview of Surgical Instruments for Standard and Standard Plus Implants
056030
056040
290×175×62
69×47×29
P/N Product Description Material Size
Bioconcept surgical cassette,
includes screw container 056040,
without instruments
Screw container, with lid,
for Bioconcept surgical cassette,
without screws
Plastic
Plastic
Stand Implants + Standard Plus Implants Φ3.3 mm
Stand Implants + Standard Plus Implants Φ4.1 mm
Stand Implants + Standard Plus Implants Φ4.8 mm
Round Burr 051010, Φ1.4 051020, Φ2.3 051030, Φ3.1
Pilot drill 1 Φ2.2mm051040, short 051050, long
Pilot drill 2 Φ2.8mm051060, short 051070, long
Twist drill Φ3.5mm051080, short 051090, long
Twist drill Φ4.2mm051100, short 051110, long
Alignment pin Φ2.2mm053010
Depth gauge Φ2.2/2.8 mm 053020
Depth gauge Φ3.5mm053030
Depth gauge Φ3.5mm053040
Tap Φ3.3 mm 051240, short 051250, long Adapter-tap 051260
Tap Φ4.1 mm 051270, short 051280, long Adapter-tap 051290
Tap Φ4.8 mm 051300, short 051310, long Adapter-tap 051320
*For Standard Plus Implants: SP Profile drillΦ2.8 mm 051120, short 051130, long
For Standard Plus Implants: SP Profile drill Φ3.5 mm 051140, short 051150, long
**For Standard Plus Implants: SP Profile drillΦ4.2 mm 051160, short 051170, long
* (do not use with Standard Plus Implant, Narrow Neck 3.5 mm) All measurements in mm **(do not use with Standard Plus Implant, Regular NeckΦ4.8 mm)
Φ
17 18
PRODUCT CATALOG PRODUCT CATALOG
051010
051020
051030
051040
051050
053010
051060
051070
053020
051120
051130
051240
051250
051260
S Φ1.4
SΦ2.3
S Φ3.1
Φ2.2×33
Φ2.2×41
Φ2.2
Φ2.8×33
Φ2.8×41
Φ2.8
SP Φ2.8×25
SP Φ2.8×34
TR Φ3.3×30
TR Φ3.3×34
TA Φ3.3×23
P/N Product Description Material Size
Surgical Instruments For Standard and Standard Plus Implants, endosteal 3.3 mm Φ
Basic implant bed preparation for Standard and Standard Plus implants 3.3 mm Φ
Round bur
Round bur
Round bur
Pilot drill 1, short
Pilot drill 1, long
Alignment pin
Pilot drill 2, short
Pilot drill 2, long
Depth gauge, with distance indicator
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Fine implant bed preparation for Standard Plus implants 3.3 mm Φ
SP Profile drill, short
SP Profile drill, long
Stainless Steel
Stainless Steel
SP Profile drills are used for preparing the shoulder configuration of Standard Plus implants in the bone.
Important: Do not use SP Profile drills with Standard Plus implants 3.3 mm, NN, or with Standard Plus implants 4.8 mm, RN. Φ Φ
Fine implant bed preparation for Standard and Standard Plus implants 3.3 mm Φ
S/SP Tap for ratchet, short
S/SP Tap for ratchet, long
S/SP Tap for adapter Stainless Steel /Polymer
Stainless Steel
Stainless Steel
S/SP Taps are used for pretapping the implant bed for Standard and Standard Plus implants.
Important: For Sand SP Φ3.3 mm implants, pretapping is recommended in dense bone (class* 1 and 2).
NN = Narrow Neck RN = Regular Neck S = Standard SP = Standard Plus * Class 1: hardest bone/Class 4: softest bone
Tapered Effect Implants Φ3.3 mm
Tapered EffectImplants Φ4.1 mm
Tapered Effect Implants Φ4.8 mm
Round Burr 051010, Φ1.4 051020, Φ2.3 051030, Φ3.1
Pilot drill 1 Φ2.2mm051040, short 051050, long
Pilot drill 2 Φ2.8mm051060, short 051070, long
Twist drill Φ3.5mm051080, short 051090, long
Twist drill Φ4.2mm051100, short 051110, long
Depth gauge Φ4.2mm053040
Depth gauge Φ3.5mm053030
Depth gauge Φ2.2/2.8 mm 053020
Alignment pin Φ2.2mm053010
TE Profile drill 051220, short 051230, long
TE Profile drill 051200, short 051210, long
TE Profile drill 051180, short 051190, long
19 20
Overview of Surgical Instruments for Tapered Effect Implants
All measurements in mm
PRODUCT CATALOG PRODUCT CATALOG
051010
051020
051030
051040
051050
053010
051060
051070
053020
051080
051090
053030
051010
051020
051030
051040
051050
053010
051060
051070
053020
051080
051090
053030
051100
051110
053040
051140
051150
051160
051170051270
051280
051290051300
051310
051320
SΦ1.4
SΦ2.3
SΦ3.1
Φ2.2×33
Φ2.2×41
Φ2.2
Φ2.8×33
Φ2.8×41
Φ2.8
Φ3.5×33
Φ3.5×41
Φ3.5
SΦ1.4
SΦ2.3
SΦ3.1
Φ2.2×33
Φ2.2×41
Φ2.2
Φ2.8×33
Φ2.8×41
Φ2.8
Φ3.5×33
Φ3.5×41
Φ3.5
Φ4.2×33
Φ4.2×41
Φ4.2
SP Φ3.5×25
SP Φ3.5×34
SP Φ4.2×25
SPΦ4.2×34TR Φ4.1×30
TR Φ4.1×34
TA Φ4.1×23TRΦ4.8×30
TRΦ4.8×34
TAΦ4.8×23
P/N Product Description Material Size P/N Product Description Material Size
Surgical Instruments For Standard and Standard Plus Implants, endosteal 4.1 mm Φ
Basic implant bed preparation for Standard and Standard Plus implants 4.1 mm Φ
Round bur
Round bur
Round bur
Pilot drill 1, short
Pilot drill 1, long
Alignment pin
Pilot drill 2, short
Pilot drill 2, long
Depth gauge, with distance indicator
Twist drill, short
Twist drill, long
Depth gauge
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Fine implant bed preparation for Standard Plus implants 4. mm Φ 1
SP Profile drill, short
SP Profile drill, long
Stainless Steel
Stainless Steel
SP Profile drills are used for preparing the shoulder configuration of Standard Plus implants in the bone.
Important: Do not use SP Profi le drills with Standard Plus Implants 3.3 mm, NN, or with Standard Plus Implants 4.8 mm, RN. Φ Φ
Fine implant bed preparation for Standard and Standard Plus implants 4.1 mm Φ
S/SP Tap for ratchet, short
S/SP Tap for ratchet, long
S/SP Tap for adapter Stainless Steel /Polymer
Stainless Steel
Stainless Steel
NN = Narrow Neck S = Standard * Class 1: hardest bone/Class 4: softest bone RN = Regular Neck SP = Standard Plus
Surgical Instruments For Standard and Standard Plus Implants, endosteal 4.8 mm Φ
Basic implant bed preparation for 4.8 mm Standard and Standard Plus Implants Φ
Round bur
Round bur
Round bur
Pilot drill 1, short
Pilot drill 1, long
Alignment pin
Pilot drill 2, short
Pilot drill 2, long
Depth gauge, with distance indicator
Twist drill, short
Twist drill, long
Depth gauge
Twist drill, short
Twist drill, long
Depth gauge
S/SP Taps are used for pretapping the implant bed for Standard and Standard Plus implants.
Important: For S and SP Φ4.1 mm implants, pretapping is recommended in dense bone (class* 1 and 2).
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
stainless steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Fine implant bed preparation for Standard Plus implants 4.8 mm Φ
SP Profile drill, short
SP Profile drill, long
Stainless Steel
Stainless Steel
SP Profile drills are used for preparing the shoulder configuration of Standard Plus implants in the bone.
Important: Do not use SP Profi le drills with Standard Plus Implants 3.3 mm, NN, or with Standard Plus Implants 4.8 mm, RN. Φ Φ
Fine implant bed preparation for Standard and Standard Plus implants 4.8 mm Φ
S/SP Tap for ratchet, short
S/SP Tap for ratchet, long
S/SP Tap for adapter
Stainless Steel
Stainless Steel
Stainless Steel /Polymer
S/SP Taps are used for pretapping the implant bed for Standard and Standard Plus implants.
Important: For S and SP 4.8 mm implants, pretapping is recommended over the full depth in all bone classes. Φ
WN = Wide Neck S = Standard SP = Standard Plus NN=Narrow Neck
21 22
PRODUCT CATALOG PRODUCT CATALOG
051010
051020
051030
051040
051050
053010
051060
051070
053020
051180
051190
SΦ1.4
SΦ2.3
SΦ3.1
Φ2.2×33
Φ2.2×41
Φ2.2
Φ2.8×33
Φ2.8×41
Φ2.8
TE Φ2.8×28
TE Φ2.8×37
051010
051020
051030
051040
051050
053010
051060
051070
053020
051080
051090
053030
051200
051210
SΦ1.4
SΦ2.3
SΦ3.1
Φ2.2×33
Φ2.2×41
Φ2.2
Φ2.8×33
Φ2.8×41
Φ2.8
Φ3.5×33
Φ3.5×41
Φ3.5
TEΦ3.5×28
TEΦ3.5×37
P/N Product Description Material Size P/N Product Description Material Size
Surgical Instruments For Tapered Effect Implants, endosteal 3.3 mm Φ Surgical Instruments For Tapered Effect Implants, endosteal 4.1 mm Φ
Basic implant bed preparation for Tapered Effect implants 3.3 mm Φ
Round bur
Round bur
Round bur
Pilot drill 1, short
Pilot drill 1, long
Alignment pin
Pilot drill 2, short
Pilot drill 2, long
Depth gauge, with distance indicator
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Fine implant bed preparation for Tapered Effect implants 3.3 mm Φ
TE Profile drill, short
TE Profile drill, long
Stainless Steel
Stainless Steel
TE Profile drills are used for preparing the implant bed for the coronal conical core of Tapered Effect implants.
Important: To be used in all bone classes.
RN = Regular Neck TE = Tapered Effect
Basic implant bed preparation for Tapered Effect implants 4.1 mm Φ
Round bur
Round bur
Round bur
Pilot drill 1, short
Pilot drill 1, long
Alignment pin
Pilot drill 2, short
Pilot drill 2, long
Depth gauge, with distance indicator
Twist drill, short
Twist drill, long
Depth gauge
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Fine implant bed preparation for Tapered Effect implants 4.1 mm Φ
TE Profile drill,short
TE Profile drill, long
Stainless Steel
Stainless Steel
TE Profile drills are used for preparing the implant bed for the coronal conical core of Tapered Effect implants.
Important: To be used in all bone classes.
RN = Regular Neck TE = Tapered Effect
23 24
PRODUCT CATALOG
Crowns and Bridges, Prosthetic System (Narrow Neck Φ3.5mm )
PRODUCT CATALOG
061010
061020
021030
021020
061030
031010
031020
031030
040010
K3.5-17.5
B3.5-12
X 3.5-3.4
B 3.5-3.4
3.5
3.5 ZX-9
3.5 JD15°-8.8
3.5 JD20°-8.8
2.2×M1.8-5
Impression taking and master cast fabrication
NN = Narrow NeckThe NN Copings are permanently screwed onto the implant at 35 Ncm.
P/N Product Description Material Size
Screw-and-cement-retained restorations
NN Impression cap with guide screw,length 17.5mm
integral
NN Impression cap,snap-onlength 12mm
NN Healing cap with integral occlusal screw,height 3.4mm
NN Implant analog,length 14mm
NN abutment Coping,trimmed,height 9.0mm
can be
NN Coping,angled,height 8.8mm
abutment 15°
NN Coping,angled,height 8.8mm
abutment 20°
NN Occlusal screw,height 5.0mm
yellow
NN Protective cap with integral occlusal screw,height 3.4mm
Aluminum/Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Plastic
S teeltainless S
051010
051020
051030
051040
051050
053010
051060
051070
053020
051080
051090
053030
051100
051110
053040
051220
051230
SΦ1.4
SΦ2.3
SΦ3.1
Φ2.2×33
Φ2.2×41
Φ2.2
Φ2.8×33
Φ2.8×41
Φ2.8
Φ3.5×33
Φ3.5×41
Φ3.5
Φ4.2×33
Φ4.2×41
Φ4.2
TEΦ4.2×28
TEΦ4.2×37
P/N Product Description Material Size
Surgical Instruments For Tapered Effect Implants, endosteal Φ4.8 mm
Basic implant bed preparation for Tapered Effect implants 4.8 mm Φ
Round bur
Round bur
Round bur
Pilot drill 1, short
Pilot drill 1, long
Alignment pin
Pilot drill 2, short
Pilot drill 2, long
Depth gauge, with distance indicator
Twist drill, short
Twist drill, long
Depth gauge
Twist drill, short
Twist drill, long
Depth gauge
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Stainless Steel
Stainless Steel
Titanium Alloy
Fine implant bed preparation for Tapered Effect implants 4.8 mm Φ
TE Profile drill, short
TE Profile drill, long
Stainless Steel
Stainless Steel
TE Profile drills are used for preparing the implant bed for the coronal conical core of Tapered Effect implants.
Important: To be used in all bone classes.
WN = Wide Neck TE = Tapered Effect
25 26
PRODUCT CATALOG
Crowns and Bridges, Prosthetic System (Regular Neck Φ4.8mm ) Crowns and Bridges, Prosthetic System (Regular Neck Φ4.8mm )
PRODUCT CATALOG
062010
062050
062040
062030
062090
032060
040040
032050
032070
BT4.8
BD4.8
KQ4.8-10.1
KS4.8-21
4.8
4.8 BYH-2.5
2.5×M2-4.4
4.8 BYH-1.5
4.8 BZX-5.5
032090
032100
032130
032140
032110
032120
032150
032160
032080
040040
040020
054070
4.8 BJD15°-5.7A
4.8 BJD15°-5.7B
4.8 BJD20°-5.9A
4.8 BJD20°-5.9B
4.8 BJD15°-6.7A
4.8 BJD15°-6.7B
4.8 BJD20°-6.9A
4.8 BJD20°-6.9B
4.8 BTS-4
2.5×M2-4.4
M2-3
H 24
P/N Product Description Material Size
Impression taking and master cast fabrication
P/N Product Description Material Size
RN 15°angled abutment,short, type A, height 5.7mm
Titanium AlloyRN Impression capheight 8mm
RN positioning red，height12mm
cylinder,
RN impression cap with integral guide screw,redheight 10.1mm
RN impression cap with built-in handle,redheight 21mm
Aluminum/Titanium Alloy
Aluminum/Titanium Alloy
RN analog,grey stripe, length 12mm
with red
Optional
Screw-or cement-retained restorations
P/N Product Description Material Size
P/N Product Description Material Size
P/N Product Description Material Size
Cement-retained Abutment
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
CSC=Screw Carrying SystemRN = Regular NeckTS = Transveral Screw
The RN TS abutment is permanently screwed into the implant at 35Ncm. The transversal screw is tightened only by hand. Screwed Force=35Ncm
RN = Regular Neck
RN components can only be used with Bioconcept Standard, Standard Plus and Tapered Effect implants with a Φ4.8mm Regular Neck.
RN 15°angled abutment,short, type B, height 5.7mm
RN 20°angled abutment,short, type A, height 5.9mm
RN 20°angled abutment,short, type B, height 5.9mm
RN 15°angled abutment,long, type A, height 6.7mm
RN 15°angled abutment,long, type B, height 6.7mm
RN 20°angled abutment,long, type A, height 6.9mm
RN 20°angled abutment,long, type B, height 6.9mm
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Titanium Alloy
Screw-or cement-retained restorations
Transversal (TS) Abutment
ImportantRN components can only be used with Bioconcept Standard, Standard Plus and Tapered Effect implants with a Φ4.8mm Regular Neck.
RN transversal (TS) screw-retainedabument height 4.0mm
Titanium Alloy
Titanium Alloy
Titanium AlloyTransversal screw for 032080
Auxiliary parts
TS Hexagonal screwdriver
P/N Product Description Material Size
RN 2.5 screw-retained,abument, height 2.5mm
RN 1.5 screw-retained,abument, height 1.5mm
SCS Occlusal screw,length 4.4mm
RN cemented, abument, height 5.5mm
SCS Occlusal screw,length 4.4mm
1.5mm Abutment
Important
15°and 20°Angled Abutment
Plastic
Plastic
Stainless Steel
Stainless Steel
27 28
Crowns and Bridges, Prosthetic System (Wide Neck Φ6.5mm ) Hybrid Dentures (Regular Neck Φ4.8mm )
PRODUCT CATALOG PRODUCT CATALOG
063010
063030
063020
063060
033030
033040
033050
033060
040040
BT6.5
BD6.5
KS6.5
6.5
6.5 BYH-1.5
6.5 BZX-5.5
6.8 BJD15°-5.5A
6.8 BJD15°-5.5B
2.5×M2-4.4
032040
055090
4.8SQX-3.4
RA 19
WN Impression capheight 8mm
WN positioning white, height 12mm
cylinder,
WN impression cap integral guide screwheight 10mm
with
Impression taking and master cast fabrication
P/N Product Description Material Size P/N Product Description Material Size
Titanium Alloy
WN analong, greylength 12mm
Titanium Alloy
P/N Product Description Material Size
P/N Product Description Material Size
P/N Product Description Material Size
WN 1.5 screw-retainedabutment, height 1.5mm
SCS Occlusal screw, height 4.4mm Titanium Alloy
WN cementable height 5.5mm
abutmentTitanium Alloy
WN 15°angled type A, height 5.5mm
abutment, Titanium Alloy
WN 15°angled type B, height 5.5mm
abutment, Titanium Alloy
WN = Wide NeckSCS=Screw Carrying SystemThe WN 1.5 abutment and Cementable Abutment is permanently screwed into the implant at 35Ncm.
ImportantWN components can only be used with Bioconcept Standard, Standard Plus and Tapered Effect implants with a Φ6.5mm Wide Neck.
Retentive anchor abutmentheight 3.4mm
Titanium Alloy
Retentive anchor driver
RN = Regular Neck
ImportantRN components can only be used with Bioconcept Standard, Standard Plus and Tapered Effect implants with a Φ4.8mm Regular Neck.
Retentive Anchor
Screw-or cement-retained restorations
Cementable Abutment
15°Angled Abutment
1.5 Abutment
Plastic
Plastic
Stainless Steel
Stainless Steel
29 30
Crowns and Bridges, Solid Abutment Prosthetic System (Regular Neck Φ4.8mm ) Crowns and Bridges, Solid Abutment Prosthetic System (Wide Neck Φ6.5mm )
PRODUCT CATALOG PRODUCT CATALOG
032010
032020
032030
033010
033020
063010
063040
063050
063070
063080
055070
055080
4.8 SX-4
4.8 SX-5.5
4.8 SX-7
6.5SX-4
6.5SX-5.5
BT6.5
SD6.5
SD6.5
6.5-4
6.5-5.5
SO 13
SO 19
P/N Product Description Material Size P/N Product Description Material Size
Titanium Alloy
Titanium Alloy
Titanium Alloy
062010
062060
062070
062080
062100
062110
062120
RN Impression capheight 8mm
Positioning cylinder for 032010,yellow, height 10.2mm
Positioning cylinder for 032020,grey, height 10.2mm
Positioning cylinder for 032030,blue, height 10.2mm
Analog for 032010,yellowlength 14.3mm
Analog for 032020,greylength 15.8mm
Analog for 032030,bluelength 17.3mm
Aluminium
Aluminium
Aluminium
Solid abutment driver, short,for RN solid abutment 6°
Solid abutment driver, long,for RN solid abutment 6°
WN Solid abutment 6°,brownheight 5.5mm
Titanium Alloy
Titanium Alloy
W Impression capheight 8mm
Positioning cylinder for 033010,green, height 10mm
Positioning cylinder for 033020,brown, height 10mm
Analog for 033010, greenlength 16mm
Aluminium
AluminiumAnalog for 033020, brownlength 17.5mm
RN = Regular Neck
WN = Wide Neck
RN Solid abutment 6°,yellowheight 4.0mm
RN Solid abutment 6°,greyheight 5.5mm
RN Solid abutment 6°,blueheight 7.0mm
Impression taking and master cast fabrication
BT4.8
SD4.8
SD4.8
SD4.8
4.8-4
4.8-5.5
4.8-7
Auxiliary Parts
WN Solid abutment 6°,greenheight 4.0mm
Impression taking and master cast fabrication
ImportantWN components can only be used with Bioconcept Standard, Standard Plus and Tapered Effect implants with a Φ6.5mm Wide Neck.
The Solid abutments are screwed into the implant with an SCS Screwdriver prior to impression taking, tightened definitively at 35Ncm. They must not be removed from the implant after the impression has been taken.
WN and
N
Plastic
Plastic
Plastic
Plastic
Stainless Steel
Stainless Steel
Plastic
Plastic
Plastic
31 32
PRODUCT CATALOG PRODUCT CATALOG
33 34
Crowns and Bridges, Solid Abutment Prosthetic System (Wide Neck Φ6.5mm )
P/N Product Description Material Size
RN= Regular Neck WN = Wide Neck
ImportantRN/WN components can only be used with Bioconcept Standard, Standard Plus and Tapered Effect implants with a Φ4.8mm Regular Neck /Φ6.5mm Wide Neck.
Components for screw and cement-retained crowns and bridge
P/N Product Description Material Size
090010
090020
090030 RN Plastic Coping,Bridge/Bar
RN Plastic Coping,Crown
090050
090060
090070
090080
090090
090100
090110
090120
090130
090140
090150
Plastic Coping For RN Solid Abutment,Bridge
Burn-out plastic Q4.8SX
Plastic Coping For RN Solid Abutment,Crown
Burn-out plastic G4.8SX
Burn-out plastic Q4.8BYH
Burn-out plastic G4.8BYH090040
RN Plastic Coping,Bridge Burn-out plastic Q4.8BZX
Burn-out plastic G4.8BZX RN Plastic Coping,Crown
Extension Shell For Angled RN Abutment
Burn-out plastic T4.8BJD
Plastic Shoulder For RN Angled Burn-out plastic M4.8BJD
Plastic Coping For WN Solid Abutment,Bridge
Burn-out plastic Q6.5SX
Burn-out plastic G6.5SXPlastic Coping For WN Solid Abutment,Crown
Q6.5BYH Burn-out plasticWN Plastic Coping,Bridge
G6.5BYH Burn-out plasticWN Plastic Coping,Crown
WN Plastic Coping,Bridge Burn-out plastic Q6.5BZX
G6.5BZX Burn-out plasticWN Plastic Coping,Crown
Plastic Shoulder For WN 15°angled abutments
Burn-out plastic M6.5BJD