biocides products

Biocides IntroductionContents

Company Introduction - 2 -

Products and applications - 3 -

The alternates of competitor’s biocides - 5 -

Biocide selection chart - 6 -

Technical Service - 7 -

Biocides for personal care and cosmetics - 8 -

Biocides for paints and coatings: in-can preservatives - 21 -

Paint Dry film fungicides and algaecides - 44 -

Biocides for water treatment - 54 -

Biocides for metal working fluid

Biocides for latex emulsion

Biocides for Adhesive, Pigment and Colorant Dispersions - 65 -

Disinfectants - 101 -

Biocides for Marine Paints and Coatings - 108 -

Biocides for plastics - 115 -

Biocide for Leather - 121 -

Biocides for wipe, and sponges - 131 -

Biocides for wood treatment and protection - 135 -

Solid biocides

Company Introduction

WUXI HONOR SHINE CHEM Co., Ltd is a leading biocide manufacturer focused on delivering innovation technologyand service excellence to our customers. We specialize in the production and formulation of Biocides. We have twolocations in China to produce and formulate these best biocides in the world.

Our main products include DMDMH, CMIT/MIT, MIT, BIT, Glutaraldehyde, Bronopol, Quats, DBNPA, IPBC, OIT,DCOIT, Carbendazim, Diuron, Terbutyne, Terbuthylazine, and their formulated products.

We have more than two hundreds of different biocides to serve the following industries:Personal Care and CosmeticsPaints and CoatingsPaper, Oil-field, Water TreatmentMetal Working Fluids, Adhesives, Latex Emulsions, Pigment and Colorant Dispersions, Surfactants,Fiber Lubricant and AgchemicalsDisinfectantsMarine PaintsPlastics, Leathers, Wipes, and SpongesWood treatment

Our skillful workforce will not only assist you in technologies but also provide services to fully satisfy the growingcustomers’ demands on our products.

We, as a company, continue to search for opportunities to improve our services, gain more customer recognition, andearn a reputation for responsiveness and dependability.

Products and applications

1. Personal care and cosmetics:Biocide CI-CG，Biocide DH-CG，Biocide DI-CG，Biocide DC-CG，Biocide MIT-10-CG，Biocide MIT-50-CG，Biocide IPBC-CG., Mocide ZPT-48

2. Paint and coatings

1) In-can biocidesBiocide DA-plus，Biocide BIT-20, Biocide BRC, Biocide CI，Biocide MBS, Biocide SPT-plus, Biocide BIT-10，Biocide DH, Biocide DC，Biocide DC-plus, Biocide DI，Biocide DBNPA-20.

2) Dry film fungicides and/or algaecides

Mocide EPW, Mocide DL, Mocide CC-2, Mocide CCD-2, Mocide IPBC-20

3. Water treatment (pulping, oilfield, water treatment)Biocide GTQ, Biocide DA-plus, Biocide CI-14-WT, Biocide DBNPA-20-WT.

4. Metal working fluid, Adhesive, Latex emulsion, Pigment, ColorantBiocide DA-plus, Biocide MBS, Biocide MIT-10，Biocide BIT-20，Biocide BIT-10，Biocide DC-plus，BiocideDH，Biocide DC, Biocide DI，Biocide BRC，Biocide DBNPA-20，Biocide BRC-R, Biocide DC-plus.

5. DisinfectantBiocide DDAC, Biocide BQI.

6. Marine paints

Mocide DCOIT (30%), Mocide DC-88, Mocide ZPT, Mocide CPT.

7. Plastics

Mocide OIT-10, Mocide DCOIT-10.

8. Leathers

Mocide 30L-E, Mocide CC-O, Mocide 30L-plus, Mocide BQI

9. Wipes, and sponges

Biocide BQI, Biocide SPT-plus, Biocide BRC, Mocide DL , Biocide DI.

10. Wood Treatment

Biocide BQI, Bocide BO, Biocide CI-14.

The alternates of competitor’s biocides

Remarks: BIT: Benzisothiazolinone; CIT/MIT: chlormethy1 & methyl isothiazolinone;FR: Formaldehyde release agent; BNPD: Bronopol;IPBC: 3-iodo-2-propyny1 carbamate;

WUXI HONOR SHINECHEM

Active ingredient Competitors’ similar or same products

Biocide CI 1.5% CMIT/MIT Kathon LX 1.5, Kathon LXE, Kathon WT1.5%, Prevento D7,Mergal K7, Glokill80, MergalK9n, Metain K604, Parmetl K40,Acticide SPX, Acticide LG/LGD, Mergal W

Biocide MBS 5.0% MIT, BIT solution Acticide MBSBiocide SPT-plus 5% BIT…. Other high pH biocides, pH 2-12Biocide MIT-10 10% MIT Rocima 550Biocide BIT-10 10% BIT Proxel XL2, Acticide B10, Bacteria BIT10, Parmetol D22,

Acticide SR911, Mergal K603, Mergal K10, Metatin K602Biocide BIT-20D 20% BIT dispersion Proxel BD-20Biocide BIT-20 20% BIT solution Proxel GXLBiocide DH DMDMH Dantogard, GlydantBiocide DI DMDMH+IPBC DantogardBiocide DC DMDMH,CMIT/MIT Ecocide ITHBiocide BRC Bronopol+CMIT/MITMocide CC-2 Fungicides Skane M8, Acticide DW, Mergal S96/97, Metatin 55-43,

Parmetol DF12/18, DENSIL, Polyphase 680Mocide CCD-2 Fungicides/algaecide Acticide EPW Paste, Parmetol DF19, Densil ND, Mergal

S88/S89, Nipacide DFX, Polyphase 663Mocide IO IPBC+OIT Polyphase P20T, Omacide IPBC-20Mocide DL DCOIT, Algaecide,

Fungicides andpreservative

Polyphase P20T, Omacide IPBC-20, Rocima 342, Rozone2000,

Mocide BQI Fungicides/algaecide NP-1, spray or soaking applicationMocide EPW Fungicides/algaecide Acticide EPW, Polyphase 678, 663

Biocide selection chart

Water based in-can preservative

Wide Compatibility MBS, DH, BIT, MIT, DI

No formaldehyde MBS, BIT, MIT, CI, BRC, BQI, SPT-plus

Broad-spectrum MBS, SPT-plus, BRC, DI, BQI

High pH systems MBS, SPT-plus, DH, BIT, MIT

No potential discoloration MBS, CI, DH, BIT

FDA, EPA approval ALL

No limitation MBS, BIT, MIT, BRC

Water based dry film fungicide and algaecide

Broad spectrum DL, CC-2, CCD-2, EPW

Broad pH range CC-2, CCD-2, EPW, DL

Powder CC-P , CCD-P, BC-50

Stable under sunlight DL, CC-2, CCD-2, BC-50

High pH system BC-50, CC-2 and CCD-2

Stable under high temperature CC-2, BC-50, DL, OIT-45

No influence by acidic rain BC-50, CC-2, DL and CCD-2

Wood protection BQI, CI-14, DL, BO

Strong algaecide activity DL, CCD-2, EPW

Oil based paint dry film fungicide and algaecide

Broad spectrum DL, CC-P, CCD-P, BC-50, OIT-45

Powder CC-P , CCD-P, IPBC, BC-50

Stable under sunlight DL, CC-2, and CCD-2

Stable under high temperature DL, CC-P, , OIT-45

No influence by acidic rain DL, CC-P, and CCD-P

Strong algaecide activity DL, CCD-P

Technical Service

Microbiocide screening

Total viable count

In-Can preservation

Dry film resistance

Microbial kill rate and dose

Preservative efficacy testing

Biocide comparison test

Plant hygiene surveys

Plant tour and training

HPLC analysis

Chemical and physical stability

Compatibility study

Case study

Formulation support

Biocides for personal care and cosmetics

Product Name Activeingredient

Use level(w/w) Characteristics Remark

Biocide CI-CG CMIT/MIT(1.5%) 0.05-0.2%

Broad spectrum,worldwide usedfungicides, bactericide

pH<8.5, Keep under 400C, no formaldehyde

BiocideSPT-plus-CG BIT… 0.05-0.2%

Broad spectrum and pHrange 2-12, compatiblewith all products

Formaldehyde free Stableat pH 2-12, best on fungi,for wash away applicationonly

Biocide DH-CG DMDMH 55% 0.05-1.0%Broad spectrum and pHrange, compatible with allproducts

Formaldehyde donorbiocide; Stable at pH 2-12

Biocide DI-CG DMDMH… 0.05-0.5%Broad spectrum,worldwide usedfungicides, bactericide

Used at pH 2-10

Biocide DC-CG DMDMH… 0.05-0.5% Broad spectrum,fungicides, bactericide Used at pH 2-9

BiocideMIT-10-CG MIT (10%) 0.05-0.8% Stable at high pH systems

(2-11)No formaldehyde,

BiocideMIT-50-CG MIT (50%) 0.02-0.2% Stable at high pH systems

(2-11) No formaldehyde,

Biocide IM-CG IPBC+MIT 0.05-0.3% Broad spectrum,fungicides, bactericide pH 4-8

Mocide ZPT-48 ZPT (48%) 1.5-2% Broad spectrum,fungicides, bactericide

pH 4-10, antidandruffShampoo

Biocide CI-CG: An in-can preservative

Biocide CI-CG is a liquid biocide and has been widely used as a preservative in a variety ofapplications, which include personal care, cosmetics, slurries, dispersed pigments, adhesives,latex emulsions. The active ingredients provide broad-spectrum activity against common bacteriaand fungi. Biocide CI-CG is approved by EPA and FDA for industrial and cosmetic applications. Itis highly recommended for water containing systems with pH 2 to 9.

Product Benefits:1. Chemically stable at pH 2-92. Broad spectrum efficacy for bacteria, fungi, and enzyme3. Low use level, no VOC and odor4. No APE surfactant5. Compatible with many surfactants and other ingredients

Physical and Chemical Properties:

Active Ingredient 2-Methyl-Isothiazolin-3-one(MIT)and5-Chloro-2-Methyl-Isothiazolin-3-one (CMIT)

Concentration 1.5%Appearance Yellow solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide CI-CG is widely used in personal care, cosmetics. Biocide CI-CG can be added at anystages of the production. WUXI HONOR SHINE CHEM can assist you to determine the use levelin you specific products.

Dosage:Typical use concentrations are in the range of 0.05-0.2% (w/w) in the final products. It should benoticed that a good manufacturing practices should be applied and equipment, pipes, andstorage tanks should be sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safetygoggles and shields for eyes are strongly advised. If the product comes in contact with the skin,wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty ofwater and seek medical attention. The product should be stored at room temperature.

Packaging:25 and 200 kg plastic containers

Biocide SPT-plus-CG: An in-can preservative

Biocide SPT-plus-CG is an aqueous solution of micro biocide; it is a unique preservative and has beenused in a variety of personal care and cosmetic applications. The active ingredient providesbroad-spectrum activity against common bacteria and fungi. Biocide SPT-plus-CG has been approvedby EPA, FDA for industrial and cosmetic applications. Biocide SPT-plus-CG is highly recommended forwater containing systems with pH>8 and a wash off product.

Product Benefits:1. Chemically stable in high pH formulations up to 122. Broad spectrum efficacy on bacteria, best for fungi3. No VOC, No Odor, No heavy metal salts4. Non flammable, no APE surfactant, low irritation5. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredient BIT and anotherConcentration 10.0%Appearance Amber liquidpH 9-12Solubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide SPT-plus-CG has been used in cosmetics, personal care and other high pH water containingsystems. Biocide SPT-plus-CG can be added in at any stages of the production. WUXI HONOR SHINECHEM can assist you in deciding the use level in you specific products.

Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should be noticedthat a good manufacturing practices should be applied and equipment, pipes, and storage tanks shouldbe sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety gogglesand shields for eyes are strongly advised. If the product comes in contact with the skin, washimmediately with plenty of water. In case of eye contact, rinse immediately with plenty of water and seekmedical attention. The product should be stored at room temperature.

Packaging:25kg and 200 kg impervious plastic containers

Transport: Non-dangerous goods

Biocide DH-CG: An in-can preservativeBiocide DH-CG is an aqueous solution micro-biocide, it is a very popular preservative for personal carecosmetics. The active ingredient provides broad-spectrum activity against common bacteria and fungi.DMDMH is approved by EPA and FDA for cosmetics and industrial applications and is highlyrecommended for water containing systems with pH 4-12.Product Benefits:

1. Chemically stable in high pH formulations up to 122. Broad spectrum efficacy for bacteria and fungi3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world6. No heavy metal salts, no side effect to the skin and eyes in daily use.

Physical and Chemical Properties:Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH)Concentration 55.0%Appearance Colorless liquidpH 6.5-8.0Specific Gravity @ 25℃ 1.1 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide DH-CG has been used in personal care, cosmetics and other high pH water containing systems.Biocide DH-CG can be added in at any stages of the production. WUXI HONOR SHINE CHEM can assistyour to decide the use level in you specific products.Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should be noticedthat a good manufacturing practices should be applied and equipment, pipes, and storage tanks shouldbe sanitized by Biocide DBNPA-20 regularly.Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles andshields for eyes are strongly advised. If the product comes in contact with the skin, wash immediately withplenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention.The product should be stored at room temperature.Packaging: 25kg and 200 kg impervious plastic containers

Biocide DI-CG: An in-can preservativeBiocide DI-CG is an aqueous in-can preservative and has been used in a variety of industrial,personal care, and cosmetic applications. The active ingredients provide broad-spectrumactivity against common bacteria and fungi. It contains DMDMH and IPBC; both have beenapproved by EPA and FDA for cosmetic and industrial applications and are highly recommendedfor water containing systems with pH 4.0-10.0.

Product Benefits:1. Chemically stable in high pH formulations up to 10.02. Broad spectrum efficacy for mold and bacteria, best for mold control3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world

Physical and Chemical Properties:Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH), IPBCConcentration 45.0%Appearance Colorless to pale yellow liquidpH 7.0-8.0Specific Gravity @ 25℃ 1.1 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide DI-CG has been used in cosmetics, personal cares, sponge, wipe and other watercontaining systems. Biocide DI-CG can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you in deciding the use level in you specific products.


Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safetygoggles and shields for eyes are strongly advised. If the product comes in contact with the skin,wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty ofwater and seek medical attention. The product should be stored at room temperature.Packaging:25kg and 200 kg impervious plastic containers

Biocide DC-CG: An in-can preservativeBiocide DC-CG is an aqueous in-can preservative and has been used in a variety of industrial and personalcare applications, which include cosmetics, personal care. The active ingredients provide broad-spectrumactivity against common bacteria and fungi. It contains DMDMH and CIT/MIT which have been approved byEPA and FDA for cosmetic and industrial applications and is highly recommended for water containingsystems with pH 4-9.Product Benefits:

1. Chemically stable in pH formulations up to 92. Broad spectrum efficacy on both bacteria and mold3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world


Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH) andCMIT/MIT

Concentration 50.0%Appearance Colorless to pale yellow liquidpH 4-6Specific Gravity @ 25℃ 1.1 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide DC-CG has been used in personal care, cosmetics. Biocide DC-CG can be added in at any stagesof the production. WUXI HONOR SHINE CHEM can assist you to decide use level in you specific products.Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should be noticed thata good manufacturing practices should be applied and equipment, pipes, and storage tanks should besanitized by Biocide DBNPA-20 regularly.Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles andshields for eyes are strongly advised. If the product comes in contact with the skin, wash immediately withplenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention.The product should be stored at room temperature.Packaging:25kg and 200 kg impervious plastic containers

Biocide MIT-10-CG: An in-can preservative

Biocide MIT-10-CG is an aqueous solution micro biocide; it is a unique preservative and hasbeen used in a variety of personal care and cosmetic applications. The active ingredientprovides broad-spectrum activity against common bacteria and fungi. Biocide MIT-10-CG hasbeen approved by EPA, FDA for industrial and cosmetic applications. Biocide MIT-10CG ishighly recommended for water containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 112. Broad spectrum efficacy on bacteria3. No VOC, No Odor, Non flammable4. Do not discolor the protected products5. No metal Salts and APE surfactant, low irritation6. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredient 2-methyl-4-isothiazolin-3-one (MIT)Concentration 10.0%Appearance Amber liquidpH 3-7Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide MIT-10-CG has been used in cosmetics, personal care, and other high pH watercontaining systems. Biocide MIT-10-CG can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you in deciding the use level in you specific products.




Transport:Non-dangerous goods

Biocide MIT-50-CG: An in-can preservative

Biocide MIT-50-CG is an concentrated aqueous solution micro-biocide; it is a uniquepreservative and has been used in a variety of personal care and industrial applications, whichinclude cosmetics, water based coatings such as paints, slurries, dispersed pigments,adhesives, latex emulsion, processing water. The active ingredient provides broad-spectrumactivity against common bacteria and fungi. Biocide MIT-50-CG has been approved by EPA,FDA for industrial and cosmetic applications. Biocide MIT-50-CG is highly recommended forwater containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 112. Broad Spectrum Efficacy, low use level, low irritation3. No VOC, No Odor, Non flammable4. Do not discolor the protected products5. No metal Salts and APE surfactant6. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredient 2-methyl-4-isothiazolin-3-one (MIT)Molecular Formula C4H5NOSMolecular Weight 115.06Concentration 50.0%Appearance Amber liquidpH 3-5Specific Gravity @ 25℃ 1.1Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide MIT-50-CG has been used in personal care, cosmetics, paints, slurries, dispersedpigments, adhesives, latex emulsion, processing water and other high pH water containingsystems. Biocide MIT-50-CG can be added in at any stages of the production. WUXI HONORSHINE CHEM can assist you in deciding the use level in you specific products.

Dosage:Typical use concentrations are in the range of 0.02-0.2% (w/w) in the final products. It shouldbe noticed that a good manufacturing practices should be applied and equipment, pipes, andstorage tanks should be sanitized by Biocide DBNPA-20 regularly.



Transport:Non-dangerous article

Biocide IM-CG: A fungicide and bactericide for cosmetics

Biocide IM-CG is a combination of IPBC and MIT and offers highly effective,broad-spectrum protection against degradation, discoloration and defacement caused bymold, mildew. It has a unique IPBC and MIT chemistry and is widely used in the world.

Advantages:1. Broad spectrum and long lasting2. Low toxicity and compatible with many products.3. Broad pH range stability (5-10).4. Can be used in aqueous and oil based systems5. Non-metallic and non-corrosive6. Non toxic solvents, such as DMSO

Chemical and Physical Properties:

Appearance Yellowish liquidActive ingredient 10%pH (20℃) N/ASolubility Disperse in aqueous and oil based systemsStability Stable for two years at below 25℃

Applications and Use Levels:Biocide IM-CG is used primarily as an in-can bacterial and mold protector for personal care,cosmetics. It is easily incorporated into water-based or solvent-based formulations. It can beadded efficiently at the appropriate formulation stage. The product exhibits good stability withionic surfactants and emulsifiers. Recommended use levels are between 0.05 to 0.4% basedon the wet formulation weight.

Toxicity: Acute toxicity LD50：>2500 mg /kg

Handling:When handle Biocide IM-CG, the usual precautions for handling of chemicals should befollowed. Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean theskin with plenty of water and soap, flush eyes with water and buffer solution.

Transport and Storage:Biocide IM-CG is a non flammable hazardous substance in the sense of the transportationregulations in US and Europe standards.

Packaging:25 kg cardboard drum

Mocide ZPT-48, Anti-Dandruff AgentMocide ZPT-48 is a fungicide and bactericide offering highly effective, broad-spectrumprotection against dandruff fungi. It has a unique 2-pyridinethiol-1-oxide chemistry. It is oneof the most common biocides for shampoo in the world.

Dandruff is a condition recognized by dry, flaking and itching of the scalp, sometimes verysevere. Some research indicates that yeasts or strains of yeast cause dandruff. Yeast thatgrows in the scalp, including in our oil glands located deep in the scalp. The yeast that lives inthe oil glands and on the scalp basically eat up the natural body oil produced, this oil generallylubricates the hair and scalp. Researchers believe that the body's natural defenses to yeast onthe scalp is to shed dead skin cells. As a result, flaking and scaling occurs on the scalp, anddandruff is formed.

Advantages1. Broad spectrum as fungicide and bactericide, long lasting in efficacy2. VOC free, small particle sizes and thermal stable, No flash point3. Superior in control of dandruff in shampooing.

Chemical and Physical Properties

Appearance Off white dispersionActive ingredient 48.0%

pH (20℃) 5-7

Particle size 0.1-5 μmSolubility Disperse in Shampoo

Freezing point 0 0C

Indications:Helps stop itching, flaking, scaling, irritation and redness associated with dandruff andseborrheic dermatitis.

Applications and Use LevelsMocide ZPT-48 is used primarily as anti-dandruff agent for shampoo. It can be addedefficiently at the cooling stage of shampoo production. Recommended use levels are 2%base on the wet shampoo formulation.

Packaging25kg、200kg plastic drum

Transport and StorageMocide ZPT-48 is a non hazardous substance in the sense of the transport regulation.

Biocides for paints and coatings: in-can preservatives

Name Activeingredient


Biocide CI 1.5% CIT/MIT 0.05-0.4% Board spectrum, noformaldehyde Use pH range <9

Biocide MBS BIT, MIT (5.0%)Solution 0.05-0.8%

Board spectrum,bactericide, noformaldehyde

Stable pH range 2-11,VOC free

BiocideSPT-plus BIT… Solution 0.05-0.4%


Stable pH range 2-12,VOC free, best forfungi control

BiocideDC-plus

DMDMH,CMIT/MIT(16.5%)

0.05-0.6%Board spectrum,vapor bactericide,and fungicide

Stable pH range 4-9,for head spacecontrol, lowformaldehyde

Biocide BIT-20 BIT (20%) 0.05-0.4%Board spectrum,bactericide, noformaldehyde

Stable pH range 2-14

Biocide BIT-10 BIT (10%) 0.1-0.8%Board spectrum,bactericide, noformaldehyde,


Biocide BRC orBRC-plus Bronopol 0.05-0.6%


Stable pH range 4--9

Biocide DI DMDMH, (45%) 0.05-0.6% Board spectrum,bactericide, fungicide Stable pH range 4-10

Biocide DC DMDMH, (45%) 0.05-0.6% Board spectrum,bactericide, fungicide Stable pH range 4-9

Biocide DA-plus DBNPA+CIT/MIT 0.05-0.4%



BiocideDBNPA-20 DBNPA (20%) 0.02-0.2%

Board spectrum,bactericide,fungicide, algaecide

Stable pH range 4-9

Biocide CI: An in-can preservative

Biocide CI is a liquid biocide and has been used as a preservative in a variety of industrial applications,which include water treatment, paper and pulping, cooling tower, waste water, wash water, water basedcoatings such as paints, slurries, dispersed pigments, adhesives, latex emulsion. The active ingredientprovides broad-spectrum activity against common bacteria and fungi. Biocide CI is approved by EPA andFDA for industrial and cosmetic applications. It is highly recommended for water containing systems withpH 2 to 9.

Product Benefits:1. Chemically stable at pH 2-92. Broad spectrum efficacy for fungi and algae3. Low use level, no VOC and odor, no APE surfactant4. Compatible with many surfactants and other ingredients


Active Ingredient 2-Methyl-Isothiazolin-3-one (MI) and5-Chloro-2-Methyl-Isothiazolin-3-one (CMIT)

Concentration 1.5 %Appearance Green solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide CI is widely used in pulp/paper, industrial water, waste water, paints, slurries, dispersed pigments,adhesives, latex emulsion, processing water and other neutral pH systems. Biocide CI can be added atany stages of the production. WUXI HONOR SHINE CHEM can assist you to determine the use level inyou specific products.


Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles andshields for eyes are strongly advised. If the product comes in contact with the skin, wash immediately withplenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention.The product should be stored at room temperature.


Biocide SPT-plus: An in-can preservative and fungicide

Biocide SPT-plus is an aqueous solution micro biocide; it is a unique preservative. The activeingredient provides broad-spectrum activity against common bacteria and fungi. BiocideSPT-plus has been approved by EPA, FDA for industrial applications. Biocide SPT-plus ishighly recommended for water containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 122. Broad spectrum efficacy on bacteria, best for fungi3. No VOC, No Odor, Non flammable4. No metal salts and APE surfactant, low irritation5. Compatible with all surfactants and other ingredients


Applications and Application Methods:Biocide SPT-plus has been used in personal care, paints, slurries, dispersed pigments,adhesives, latex emulsion, processing water and other high pH water containing systems.Biocide SPT-plus can be added in at any stages of the production. WUXI HONOR SHINECHEM can assist you in deciding the use level in you specific products.





Biocide MBS: An in-can preservative

Biocide MBS is an aqueous solution of MIT and BIT. It is a unique preservative and has beenused in a variety of industrial applications, which include water based coatings, slurries,dispersed pigments, adhesives, latex emulsions, and process water. The active ingredientsprovide broad-spectrum activity against common bacteria and fungi MIT, and BIT are approvedby EPA for industrial applications and are highly recommended for water containing systemswith pH 3-11.

Product Benefits:1. Chemically stable in high pH formulations up to 112. Broad spectrum efficacy, highly stable3. No odor, non flammable, no formaldehyde4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients


Active Ingredient 2-Methyl-Isothiazolin-3-one (MIT) and1,2-benzeisothiazoline (BIT)

Concentration 5.0%Appearance Amber liquid solutionpH 7-10Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water 100%Stability Stable for 1 year @ 25℃

MIC in ppm of actives BIT MITCombination(BIT&MIT)

Escherichia coli 25 20 5

Ps. aeruginosa 150 25 20

Proteus sp. 20 25 5

Klebsiella sp. 25 20 10

Ps. stutzeri 25 20 5

Aspergillus niger 100 250 50

Penicillium peniculosum 100 200 50

Synergistic Activity of BIT/MIT

Applications and Application Methods:Biocide MBS has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion,process water and other high pH water containing systems. WUXI HONOR SHINE CHEM canassist you to determine the use level in you specific products. Recommended adding at thelast stage of the production below 50℃.

Dosage:Typical use concentrations are in the range of 0.1-0.8% (w/w) in the final products. It shouldbe noticed that a good manufacturing practices should be applied and equipment, pipes, andstorage tanks should be sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safetygoggles and shields for eyes are strongly advised. If the product comes in contact with theskin, wash immediately with plenty of water. In case of eye contact, rinse immediately withplenty of water and seek medical attention. The product should be stored at roomtemperature.

Biocide DC-plus: An in-can preservative

Biocide DC-plus is an low concentration of formaldehyde releasing aqueous in-canpreservative and has been used in a variety of industrial applications which include cosmetics,personal care, water based coatings, paints, slurries, dispersed pigments, adhesives, latexemulsions, and process water. The actives ingredients provide broad-spectrum activity againstcommon bacteria and fungi. It contains DMDMH and CMIT/MIT preservatives, both have beenapproved by EPA and FDA for cosmetic and industrial applications. It is highly recommendedfor water containing systems with pH 2.0-9.0.

Product Benefits:1. Chemically stable in high pH formulations up to 9.02. Broad spectrum efficacy, low formaldehyde3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world


Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH) and CMIT/MITConcentration 16%Appearance Colorless to pale yellow liquidpH 4-6Specific Gravity @ 25℃ 1.1 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide DC-plus has been used in paints, coatings, cosmetics, personal cares and other watercontaining systems. Biocide DC-plus can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you to determine the use level in you specific products.


Biocide BIT-20: An in-can preservative

Biocide BIT-20 is an aqueous solution micro-biocide, which is a unique preservative and has been used ina variety of industrial applications, which include water based coatings such as paints, slurries, dispersedpigments, adhesives, latex emulsion, and process water. The active ingredient provides broad-spectrumactivity against common bacteria and fungi. Biocide BIT-20 is approved by EPA for industrial applicationsand is highly recommended for water containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 142. Broad spectrum efficacy, no odor, non flammable4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients6. Strong stability, no change within one year from -20℃ to 40 0C. The active ingredient is still

stable at 150 0C


Active Ingredient 1,2-benzeisothiazoline (BIT)Concentration 20%Appearance Amber liquidpH 9-14Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-20 has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion,processing water and other high pH water containing systems. Biocide BIT-20 can be added in at anystages of the production. WUXI HONOR SHINE CHEM can assist you in deciding the use level in youspecific products. Recommended adding at the last stage of the production below 100℃.



Biocide BIT-10 is an aqueous solution micro biocide, which is a unique preservative and hasbeen used in a variety of industrial applications, which include water based coatings such aspaints, slurries, dispersed pigments, adhesives, latex emulsion, and processing water. Theactive ingredient provides broad-spectrum activity against common bacteria and fungi. BiocideBIT-10 is approved by EPA for industrial applications and is highly recommended for watercontaining systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 14.2. Broad spectrum efficacy, no VOC, no odor, non flammable4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients


Active Ingredient 1,2-benzeisothiazoline (BIT)Concentration 10%Appearance Amber liquidpH 12-14Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-10 has been used in paints, slurries, dispersed pigments, adhesives, latexemulsions, process water and other high pH water containing systems. Biocide BIT-10 can beadded in at any stages of the production. WUXI HONOR SHINE CHEM can assist you todecide the use level in you specific products.


Biocide BRC and BRC-plus: An in-can preservative

Biocide BRC is an aqueous solution micro biocide; it is a superior preservative and has been used in avariety of industrial applications, which include process water, and water based coatings such as paints,slurries, dispersed pigments, adhesives, latex emulsions. The active ingredients provide broad-spectrumactivity against common bacteria and fungi. Biocide BRC is approved by EPA and FDA for industrial andcosmetic applications and is highly recommended for water containing systems with pH 4-8.5.

Product Benefits:1. Chemically stable in pH of 4-8.52. Broad spectrum efficacy for bacteria, fungi, and algae3. No VOC, No odor, Non flammable4. Do not discolor the protected products at used levels.5. No heavy metal salts and APE surfactant6. Compatible with all surfactants and other ingredients7. Very low toxicity, best for paint and coating


Active Ingredient 2-bromo-2-nitro-1, 3-propanediol (Bronopol) and CMIT/MIT.Concentration BRC 10.0% or BRC plus 20%Appearance Clear solutionpH at 1% 4.5 to 7.0Solubility in water 100%Stability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BRC has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion, processingwater and other water containing systems. Biocide BRC can be added in at any stages of the production.WUXI HONOR SHINE CHEM can assist you in determining the use level in you specific products.


Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles andshields for eyes are strongly advised. If the product comes in contact with the skin, wash immediately with

plenty of water. In case of eye contact, rinse immediately with plenty of water and seek medical attention.The product should be stored at room temperature.



Biocide DI: An in-can preservative

Biocide DI is an aqueous in-can preservative and has been used in a variety of industrialapplications which include cosmetics, personal care, water based coatings such as paints,slurries, dispersed pigments, adhesives, latex emulsions, and process water. The activeingredients provide broad-spectrum activity against common bacteria and fungi. It containsDMDMH and IPBC, both has been approved by EPA and FDA for cosmetic and industrialapplications. It is highly recommended for water containing systems with pH 2.0-10.0.

Product Benefits:1. Chemically stable in high pH formulations up to 10.02. Broad Spectrum Efficacy, control both fungi and bacteria3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation and widely used in the world


Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH)….Concentration 45%Appearance Colorless to pale yellow liquidpH 7.0-8.0Specific Gravity @ 25℃ 1.1 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide DI has been used in cosmetics, personal cares and other water containing systems.Biocide DI can be added in at any stages of the production. WUXI HONOR SHINE CHEM canassist you to determine the use level in you specific products.


Biocide DC: An in-can preservative

Biocide DC is an aqueous in-can preservative and has been used in water based coatings, slurries, dispersedpigments, adhesives, latex emulsions, and process water. The active ingredients provide broad-spectrum activityagainst common bacteria and fungi. It contains DMDMH and another preservative, both has been approved by EPAand FDA for cosmetic and industrial applications. It is highly recommended for water containing systems with pH2.0-9.0.

Product Benefits:1. Chemically stable in high pH formulations up to 9.02. Broad Spectrum Efficacy3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world



Applications and Application Methods:Biocide DC has been used in paints, coatings, cosmetics, personal cares and other water containing systems. BiocideDC can be added in at any stages of the production. WUXI HONOR SHINE CHEM can assist you to determine theuse level in you specific products.

Dosage:Typical use concentrations are in the range of 0.05-0.4% (w/w) in the final products. It should be noticed that a goodmanufacturing practices should be applied and equipment, pipes, and storage tanks should be sanitized by BiocideDBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles and shields for

eyes are strongly advised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. The product should be storedat room temperature.


Biocide DA-plus

Biocide DA-plus is a combination liquid biocide and has been used as a biocide in a variety ofindustrial applications, which include soaking water for leather, water treatment, paper andpulping, RO membrane, cooling tower, waste water, wash water, water based coatings, slurries,dispersed pigments, adhesives, latex emulsion and metal working fluid. The active ingredientsprovide broad-spectrum activity against common bacteria, algae, and fungi. Biocide DA-pluscombines the fast acting and long lasting biocides together. It is highly recommended for watercontaining systems with pH 2 to 10.

AdvantagesOne of the strongest biocides on the market, can be diluted by water in any ratioVery effective on SRBs and common heterotrophic bacteriaEffectively control bacteria, fungi, enzyme, and algaeFact-acting, long lasting, non-oxidizing, formaldehyde-freeLimited tolerance by microbes, extremely fast antimicrobial actionUse as a ‘knockdown’ biocide treatment, enhances efficacy of commonly-used preservatives,low environmental impact, rapid degradation to non-toxic end products

Efficacy

Organism MIC (A.I. ppm)Bacteria:Pseudomonas aeruginosa 3Pseudomonas putida 2Proteus vulgaris 2Escherichia coli 3Staphylococcus aureus 2Fungi:Aspergillus niger 5Penicillium mineoluteum 5Fusarium solani 7Geotrichum candidum 2Yeast:Candida albicans 10

Compare with DBNPA 20%

Properties DBNPA-20 DA-plus

1 to 10 time dilutions Not physically stable, jampump Stable

Use level (relative) 1 1VOC 60% nonLong lasting Quick kill, not for long lasting Quick kill and long lastingCost (relative) 1 0.5pH Decrease Stable

Compare with CMIT/MIT-14

Properties CMIT/MIT-1.5% DA-plus1 to 10 time dilutions Not chemically stable StableUse level (relative) 1 0.3Quick kill Slow acting Quick killMicro resistance Yes Will not

Biocide DBNPA-20: A disinfectant and preservative

Biocide DBNPA-20 is a liquid fast acting disinfectant. It has been used in instrumentsensitization and industrial applications, which include poultry, water treatment, paper andpulping, cooling tower, waste water, wash water, paint and coating. The active ingredientprovides broad-spectrum activity against common bacteria, fungi, viruses, and algae. BiocideDBNPA-20 is approved by EPA for industrial applications. It is highly recommended for watercontaining systems with pH 4 to 10. It needs a co-biocide for long term protection.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level, low odor, fast acting (within a few minutes)4. Can be diluted by hard water, compatible with many ingredients


Active Ingredient DBNPAConcentration 20 % in glycol and waterAppearance Clear to brown solutionStability Stable for 1/2 year @ 25℃

Applications and Application Methods:Biocide DBNPA-20 is also widely used in pulp/paper, industrial water, waste water, personalcares, slurries, dispersed pigments, adhesives, latex emulsion, processing water and otherwater containing systems. Biocide DBNPA-20 can be added at any stages of the production.WUXI HONOR SHINE CHEM can assist you to determine the use level in your specificproducts.

Dosage:Typical use concentrations are in the range of 0.001 -0.20% (w/w, or 10 to 2000 ppm) in thefinal products or as a disinfectant. It should be noticed that a good manufacturing practicesshould be applied and equipment, pipes, and storage tanks should be sanitized by BiocideDBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. Theproduct should be stored at room temperature.


Transport：Non-dangerous article

Dry film fungicides and algaecides

Product Name ActiveIngredient


Mocide DL DCOIT 0.3-1.5% One of the bestproducts in the world

Use pH range 2 to 9,bactericide, fungicideand algaecide

Mocide CC-2 Carbendazim...(15%) 0.3-1.5% One of the best

products in the worldUse pH range 5 to10

Mocide CCD-2Carbendazim +Diuron+another(25%)

0.3-1.5%Mocide CC withalgaecide, like ActicideEPW

Contain algaecides

Mocide IO IPBC+OIT(20%) 0.3-2.5%

Widely used in theworld, can be used inwater or oil basedsystems, replaceIPBC-20

Board spectrum,comply with EUregulations

Mocide EPWCarbendazim +OIT+Diuron…(32%)

0.3-1.5% Dispersion, used inwater based coatings Contain algaecides

Mocide DL: A fungicide, bactericide and viruscide for interior/exterior paints

Mocide DL is a bactericide, viruscide, fungicide and algaecide; it is a two in one product andoffers highly effective, broad-spectrum protection against degradation, discoloration anddefacement caused by mold, mildew, and algae on paint surfaces. It provides long termprotection against bacterial, fungal and algae growth on paint, wood-plastic composite andother polymeric compositions. It also repeals the insects at used level.

Advantages:1、Broad Spectrum as a bactericide, viruscide, fungicide, and algaecide2、Controlled release technology, no leaching, no yellowing, long lasting.3、Low toxicity, America President Reward for environmental protection.4、Suitable for both oil and water based paint and coating.5、One of the best performers in 3 years out-doors exposure tests in US.6、Stable in strong ultraviolet radiation and acidic water, also stable in paint

Chemical and Physical Properties:Appearance Light yellow to blue liquidOdor MildSolubility Dissolved or dispersedStability Stable for 1 year at below 25 0C

Applications and Use Levels：Mocide DL is used primarily as a dry-film mildew protector for paint, wood plastics, PU resin,wood composites etc. Other applications include adhesives, metal working fluid, watertreatment, and printing inks. It is easily incorporated into water and solvent-based formulations.It can be added efficiently at the first formulation stage before the grinding to achieve the evendistribution. The product exhibits good stability with ionic surfactants and emulsifiers.Recommended use levels are between 0.5-1.5% based on the wet formulation weight.Handling：When handle Mocide DL, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Transport and Storage：

Mocide DL is a non hazardous substance in the sense of the transportation regulations.

Packaging：20kg、200kg drums

Mocide CC-2: A fungicide for interior/exterior coatings

Mocide CC-2 low cost fungicide offers highly effective, broad-spectrum protection againstdegradation, discoloration and defacement caused by mold, mildew, and algaecide. It has aunique and balanced composition of two powerful dry film fungicides.

Advantages:1. Broad Spectrum as fungicide and long lasting in film2. Controlled release technology, no leaching, no yellowing.3. Low toxicity and can be added into a product at any stage of production.4. Broad pH range stability (5-10).5. Low VOC, small particle sizes, sunlight and thermal stable.6. No flash point. Best performers in five years out-door exposure tests.


Appearance White dispersionActive ingredient 15-30%pH (20℃) 7-8Particle size 4-20 μmSolubility Disperse in aqueous and some oil based paintsFreezing point 0 0CDensity 1.1 g/mlViscosity 72-90 ku @ 25℃Stability Stable for two years at below 40℃

Applications and Use Levels:Mocide CC-2 is used primarily as a dry-film mildew protector for paint, coatings, stains, paper,plastics, wood etc. Other applications include adhesives, metalworking fluids and printinginks. It is easily incorporated into water-based formulations. It can be added efficiently at theappropriate formulation stage. The product exhibits good stability with ionic surfactants andemulsifiers. Recommended use levels are between 0.3 – 1.5% base on the wet formulationweight.

Toxicity:Acute toxicity LD50： >10000 mg /kgDermal toxicity LD50： >5000 mg/kg (rabbit)Chinese toxicity standard: low

Transport and Storage:Mocide CC-2 is a non hazardous substance in the sense of the transportation regulationstandards.

Handling:When handle Mocide CC-2, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Packaging:20kg、200kg plastic drum

Mocide CCD-2: A fungicide and algaecide for exterior coatings

Mocide CCD-2 low cost fungicide and algaecide and offers highly effective, broad-spectrumprotection against degradation, discoloration and defacement caused by mold, mildew, andalgae. It has a unique and balanced composition of two powerful dry film fungicides and analgaecide. It is one of the best fungicides and algaecides in the world.

Advantages:1. Broad Spectrum as fungicide and algaecide and long lasting in film2. Controlled release technology, no leaching, no yellowing.3. Low toxicity and can be added into a product at any stage of production.4. Broad pH range stability (5-10)5. Low VOC, small particle sizes, sunlight and thermal stable.6. No flash point and easy to use, best performers in five years out-door exposure

tests.7. Low cost


Active Ingredient 25-50%Density 1.24-1.30 g/mlAppearance White dispersionpH (20℃) 7-8Particle size 4-30 μmSpecific Gravity @ 25℃ 1.1 g/mlSolubility Disperse in aqueous and some oil based paintsFreezing point -5 0 CViscosity 72-90 ku @ 25℃Stability Stable for two years at below 40℃

Applications and Use Levels:Mocide CCD-2 is used primarily as a dry-film mildew and algae protector for paint, coatings,stains, paper, plastics, wood etc. Other applications include adhesives, metalworking fluidsand printing inks. It is easily incorporated into water-based or some solvent-based formulations.It can be added efficiently at the appropriate formulation stage. The product exhibits goodstability with ionic surfactants and emulsifiers.Recommended use levels are 0.3 – 1.5% based on the wet formulation weight.


Transport and Storage:Mocide CCD-2 is a non hazardous substance in the sense of the transportation regulations.

Handling:When handle Mocide CCD-2, the usual precautions for handling of chemicals should befollowed. Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean theskin with plenty of water and soap, flush eyes with water and buffer solution.


Mocide IO: A fungicide for interior/exterior coatings

Mocide IO fungicide offers highly effective, broad-spectrum protection against degradation,discoloration and defacement caused by mold, mildew. It has a unique IPBC chemistry and iswidely used in the world.

Advantages:1. Broad spectrum and long lasting, broad pH range stability (5-10)2. Low toxicity and widely compatible with many other ingreidents4. Can be used in aqueous and oil based systems5. Easy to transport and use6. Widely used in environmental friendly paints and coatings.


Appearance Clear solutionActive ingredient 20%pH (20℃) N/ASolubility Disperse in aqueous and oil based systemsFreezing point -10℃Stability Stable for one year at below 20℃

Applications and Use Levels:Mocide IO is used primarily as a dry-film mildew protector for paint, coatings, stains, paper,plastics, wood etc. Other applications include adhesives, metalworking fluids and printinginks. It is easily incorporated into water-based or some solvent-based formulations. It can beadded efficiently at the appropriate formulation stage. The product exhibits good stability withionic surfactants and emulsifiers. Recommended use levels are between 0.3 – 2.5% base onthe wet formulation weight.

Toxicity:Acute toxicity LD50： >4000 mg /kgDermal toxicity LD50： >5000 mg/kg (rabbit)

Transport and Storage:Mocide IO is a flammable hazardous substance in the sense of the transportation regulations inUS and Europe standards.

Handling:When handle Mocide IO, the usual precautions for handling of chemicals should be followed.

Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.


Mocide EPW: A fungicide and algaecide for exterior coatings

Mocide EPW (fungicide and algaecide) offers highly effective, broad-spectrum protection against degradation,discoloration and defacement caused by mold, mildew, and algae. It has a unique and balanced composition oftwo powerful dry film fungicides and an algaecide.

Advantages:1. Broad Spectrum as fungicide and algaecide and long lasting in film2. Controlled release technology, no leaching.3. Low toxicity and can be added into a product at any stage of production.4. Broad pH range stability (5-9). No flash point and easy to be used.5. Low VOC, small particle sizes, sunlight and thermal stable.


Active Ingredients 33%Density 1.24-1.30 g/mlAppearance White dispersionpH (20℃) 7-8Particle size 4-20 μmSpecific Gravity @ 25℃ 1.1 g/mlSolubility Disperse in aqueous based paintsFreezing point -5℃Stability Stable for 1 year at below 30℃

Applications and Use Levels:Mocide EPW is used primarily as a dry-film mildew and algae protector for paint, coatings, stains, paper, plastics,wood etc. Other applications include adhesives, metalworking fluids and printing inks. It is easily incorporatedinto water-based or some solvent-based formulations. It can be added efficiently at the appropriate formulationstage. The product exhibits good stability with ionic surfactants and emulsifiers. Recommended use levels arebetween 0.3-2.5% (w/w) based on the wet formulation weight.

Toxicity:Acute toxicity LD50： >5000 mg /kgDermal toxicity LD50：>5000 mg/kg (rabbit)Chinese toxicity standard: low

Handling:When handle Mocide EPW, the usual precautions for handling of chemicals should be followed. Avoid contactwith skin, wear goggles and gloves. In the event of a spillage, clean the skin with plenty of water and soap, flusheyes with water and buffer solution.

Transport and Storage:Mocide EPW is non hazardous substance in the sense of the transportation regulations.


Biocides for water treatment

Product Name ActiveIngredient


Biocide DA-plus DBNPA+CMIT

30-100 ppm Bactericide,fungicide

Stable at pH3-9

Biocide CI-WT CMIT/MIT(1.5%) 30-100 ppm Used in industrial

water treatmentsUse pH range4-9

Biocide CI-14-WT CMIT/MIT(14%) 10-50 ppm Used in industrial


BiocideDBNPA-20-WT

DBNPA(20%) 7-50 ppm Used in industrial


Biocide TBZ TBZ 25% 0.5-5 ppm

Pounds, lakes,rivers, recreationwater, not fordrinking water

Only controlalgae

Biocide DA-plus

Biocide DA-plus is a combination liquid biocide and has been used as a biocide in a variety ofindustrial applications, which include soaking water for leather, water treatment, paper andpulping, RO membrane, cooling tower, waste water, wash water, water based coatings such aspaints, slurries, dispersed pigments, adhesives, latex emulsion and metal working fluid. Theactive ingredient provides broad-spectrum activity against common bacteria, algae, and fungi.Biocide DA-plus combines the fast acting and long lasting biocides together. It is highlyrecommended for water containing systems with pH 2 to 10.

AdvantagesOne of the strongest biocides on the market, can be diluted by water in any ratioVery effective on SRBs and common heterotrophic bacteriaEffectively control bacteria, fungi, enzyme, and algaeFact-acting, long lasting, non-oxidizing, formaldehyde-freeLimited tolerance by microbes, extremely fast antimicrobial actionUse as a ‘knockdown’ biocide treatmentEnhances efficacy of commonly-used preservativesLow environmental impact, rapid degradation to non-toxic end products

Efficacy

Organism MIC (A.I. ppm)Bacteria:Pseudomonas aeruginosa 3Pseudomonas putida 2Proteus vulgaris 2Escherichia coli 3Staphylococcus aureus 2Fungi:Aspergillus niger 5Penicillium mineoluteum 5Fusarium solani 7Geotrichum candidum 2Yeast:Candida albicans 10

Compare with DBNPA 20%

Properties DBNPA-20 DA-plus

1 to 10 time dilutions Not physically stable, jampump Stable

Use level (relative) 1 1VOC 60% nonLong lasting Quick kill, not for long lasting Quick kill and long lastingCost (relative) 1 0.5pH Decrease Stable

Compare with CMIT/MIT-14

Properties CMIT/MIT-1.5% DA-plus1 to 10 time dilutions Not chemically stable StableUse level (relative) 1 0.3Quick kill Slow acting Quick killMicro resistance Yes Will not

Biocide CI-WT: A water treatment chemical

Biocide CI-WT is a liquid biocide and has been used as a preservative in a variety of industrialapplications, which include water treatment, paper and pulping, cooling tower, waste water,wash water, water based coatings such as paints, slurries, dispersed pigments, adhesives,latex emulsion. The active ingredient provides broad-spectrum activity against commonbacteria and fungi. Biocide CI is approved by EPA and FDA for industrial and cosmeticapplications. It is highly recommended for water containing systems with pH 2 to 9.

Product Benefits:1. Stable at pH 2-9, most common used biocide, may have resistance already2. Broad spectrum efficacy for fungi and algae3. Low use level, no VOC and odor4. No APE surfactant5. Compatible with many surfactants and other ingredients6. No formaldehyde; no flammable; low toxicity;7. Reasonable price; no remnant after using, no influence to the

environment;


Active Ingredient 2-Methyl-Isothiazolin-3-one (MI) and5-Chloro-2-Methyl-Isothiazolin-3-one (CMI)

Concentration 1.50 %Appearance Greenish solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide CI-WT is widely used in pulp/paper, industrial water, waste water, cosmetics, personalcares, paints, slurries, dispersed pigments, adhesives, latex emulsion, processing water andother neutral pH water containing systems. Biocide CI-WT can be added at any stages of theproduction. WUXI HONOR SHINE CHEM can assist you to determine the use level in youspecific products.

Dosage:Typical use concentrations are in the range of 50-200 ppm in treated water. It should be noticedthat a good manufacturing practices should be applied and equipment, pipes, and storagetanks should be sanitized by Biocide DBNPA-20 regularly.



Transport: Non-dangerous article

Biocide CI-14-WT: A water treatment biocide

Biocide CI-14-WT is a liquid and concentrated biocide and has been used as a preservative ina variety of industrial applications, which include water treatment, paper and pulping, coolingtower, waste water, wash water. The active ingredient provides broad-spectrum activity againstcommon bacteria and fungi. Biocide CI-14 is approved by EPA for industrial applications. It ishighly recommended for water containing system with pH 2.0 to 9.0.

Product Benefits:1. Chemically stable at pH 2.0-9.0, can be diluted in water with stabilizer2. Broad spectrum efficacy for fungi and algae3. Low use level, no VOC and odor4. No APE surfactant, no flammable; easy to transport and use conveniently;5. Compatible with many surfactants and other ingredients6. Reasonable price; no formaldehyde;


Appearance Yellow liquidActive Ingredient 2-Methyl-Isothiazolin-3-one (MI)

5-Chloro-2-Methyl-Isothiazolin-3-one (CMI)Concentration 13.5-14.5 %CIT/MIT（w/w） 2.5-4.0pH 2.0-4.0Specific gravity(g/mL@25℃) 1.26-1.33Stability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide CI-14-WT is widely used in pulp/paper, industrial water, waste water, processing waterand other neutral pH water containing systems. CI-14-WT can be added at any stages of theproduction. WUXI HONOR SHINE CHEM can assist you to determine the use level in youspecific products. When use in water treatment, add once every 3—7 days, the dosage isabout 10-50 ppm. the product can be used after chlorine treatments.

Dosage:Typical use concentrations are in the range of 10-50 ppm in water. It should be noticed that agood manufacturing practices should be applied and equipment, pipes, and storage tanksshould be sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety

goggles and shields for eyes are strongly advised. If the product comes in contact with the skin,wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty ofwater and seek medical attention. The product should be stored at room temperature.


Transport: Dangerous goods

Biocide DBNPA-20: A disinfectant for water

Biocide DBNPA-20 is a liquid, fast acting disinfectant. It has been used in instrument sensitizationand industrial applications, which include poultry, water treatment, paper and pulping, cooling tower,waste water, wash water, paint and coating. The active ingredient provides broad-spectrum activityagainst common bacteria, fungi, viruses, and algae. Biocide DBNPA-20 is approved by EPA andFDA for industrial and cosmetic applications. It is highly recommended for water containing systemswith pH 4 to 10. It needs a co-biocide for long term protection.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level, low odor, fast acting (within a few minutes)4. Can be diluted by hard water5. Compatible with many ingredients


Active Ingredient DBNPAConcentration 20.0 % in glycolAppearance Clear to brown solutionStability Stable for 1/2 year @ 25℃

Applications and Application Methods:Biocide DBNPA-20 is widely used in pulp/paper, industrial water, waste water, cosmetics, personalcares, slurries, dispersed pigments, adhesives, latex emulsion, processing water and other watercontaining systems. Biocide DBNPA-20 can be added at any stages of the production. WUXIHONOR SHINE CHEM can assist you to determine the use level in your specific products.

Dosage:Typical use concentrations are in the range of 3-50 ppm in waters or as disinfectant at 1000 ppm. Itshould be noticed that a good manufacturing practices should be applied and equipment, pipes,and storage tanks should be sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. The productshould be stored at room temperature.


Transport：Dangerous article

Biocide TBZ: An algaecide only

Biocide TBZ is a highly effective dispersion algaecide. It has been used in lake, pound, recreationalwater, and swimming pool as an algaecide, it is also used in industrial, ornamental and waste watersystems, The active ingredient provides broad-spectrum activity against common algae.

Product Benefits:

1. Chemically stable at pH 5-92. Broad spectrum efficacy for algae3. Low use level, low odor4. Synergistic effect with oxidative biocide5. Compatible with many water treatment ingredients


Active Ingredient 4-chloro-2, 6-dialkylamino-s-triazineConcentration 25.0 %Appearance DispersionStability Stable for 1 year @ 25 C

Applications and Application Methods:

Biocide TBZ can be used in synergistic combinations with halogen release agents for dose optimization,lower treatment cost and reduced discharge levels of organic biocides.

Routine treatment with Biocide TBZ, together with intermittent or continuous dosing of halogen, ensuresprolonged protection against all identified strains of algae, even at low halogen concentrations.

Cost of treatment is lower and lower discharge level of biocides from cooling water systems can beachieved, thus reducing their potential aquatic toxicity.

No build up of resistance due to the mode of action the treatment. Biocide CTBZ and halogens have adifferent mode of biocide action which ensures micro-organisms cannot become resistant.

Oxidizing biocides become more effective because there is no halogen demand from algae.

Biocide TBZ can be easily and directly applied to industrial water circuits.

Regular use of Biocide TBZ eliminates many of the problems caused by unchecked algal growth, i.e.loss of cooling efficiency, increased corrosion, blockages and unsightly visible contamination. WUXIHONOR SHINE CHEM can assist you to determine the use level in your specific products.

Dosage:Typical use concentrations are in the range of 1-5 ppm in water. Not for drinking water.Handling and Storage:

Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. The productshould be stored at room temperature.Packaging:25kg and 200 kg impervious plastic containersTransport：Non dangerous article

Biocides for metal working fluid

Name Activeingredient Use level (w/w) Characteristics Remark

Biocide BIT-20 BIT(20%) 2-3%

Board spectrum, bactericideand fungicide, a goodreplacement for BIT-20

Stable pHrange 2-12

Biocide SPT-plus BIT etc(10%) 0.05-0.1%

Board spectrum bactericideand fungicide, a good

replacement for BIT-20 forworking solution

Stable pHrange 2-12

Biocide BRC-RCMIT,Bronopoletc (>10%)

0.05-0.1%

Board spectrum bactericideand fungicide, a good

replacement other biocides forworking solution

Stable pHrange 2-9

Mocide DL


Biocide BIT-20 is an aqueous solution micro-biocide, it is the best choice to replace BIT-20 inmetal working fluid, paint and coatings, it overcomes BIT’s disadvantages of less activity onmold and algae, it also used in water based slurries, dispersed pigments, adhesives, latexemulsion, and process water. The active ingredient provides broad-spectrum activity againstcommon bacteria and fungi. The actives of Biocide BIT-20 has been approved by EPA forindustrial applications and is highly recommended for water containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 142. Broad spectrum efficacy on bacteria, fungi, algae3. Non flammable, reasonable price compared to BIT-20, better performer4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredient 1,2-benzeisothiazoline (BIT) etcConcentration 20.0%Appearance Amber liquidpH 10-12Specific Gravity @ 25℃ 1.1Solubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-20 has been used leather, metal working fluid, foundation solution, paints, slurries,dispersed pigments, adhesives, latex emulsion, processing water and other high pH watercontaining systems. Biocide BIT-20 can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you in deciding the use level in you specific products.Recommended adding at the last stage of the production below 40℃.

Dosage:Typical use concentrations are in the range of 0.1-0.3% for leather process oil (w/w).

for metal working fluid, foundation solution concentrates, it is suggested to use 2-3%. It shouldbe noticed that a good manufacturing practices should be applied and equipment, pipes, andstorage tanks should be sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safetygoggles and shields for eyes are strongly advised. If the product comes in contact with the skin,

wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty ofwater and seek medical attention. The product should be stored at room temperature.




Biocide SPT-plus is an aqueous solution micro biocide; it is a unique preservative. The activeingredient provides broad-spectrum activity against common bacteria and fungi. BiocideSPT-plus has been approved by EPA, FDA for industrial applications. Biocide SB is highlyrecommended for water containing systems with pH>8.








Biocide BRC-R: A non gelling preservative

Biocide BRC-R is an aqueous solution micro biocide of monovalent stabilized CMIT andBronopol; it is a superior preservative and has been used in a variety of industrial applications,which include process water, and water based coatings such as paints, slurries, dispersedpigments, adhesives, latex emulsions. The active ingredients provide broad-spectrum activityagainst common bacteria and fungi. Biocide BRC is approved by EPA and FDA for industrialand cosmetic applications and is highly recommended for water containing systems with pH4-8.5.

Product Benefits:1. Chemically stable in pH of 4-8.52. Broad spectrum efficacy for bacteria, fungi, and algae3. No VOC, no odor, non flammable4. Do not discolor the protected products at used levels.5. No heavy metal salts and APE surfactant6. Compatible with all surfactants and other ingredients7. Very low toxicity, best for metal working fluid, paint and coating


Active Ingredient 2-bromo-2-nitro-1, 3-propanediol (Bronopol) and CMIT/MIT.Concentration > 10.0%Appearance Clear solution

pH 4 to 7Solubility in water 100%Stability Stable for 1 year @ 25 0C

Applications and Application Methods:Biocide BRC-R has been used in paints, slurries, dispersed pigments, adhesives, latexemulsion, processing water and other water containing systems. Biocide BRC can be added inat any stages of the production. WUXI HONOR SHINE CHEM can assist you in determiningthe use level in you specific products.





Mocide DL: A fungicide, bactericide for metal working fluids

Mocide DL is a bactericide, viruscide, fungicide and algaecide; it is a two in one product andoffers highly effective, broad-spectrum protection against degradation, discoloration anddefacement caused by mold, mildew, and algae on metal working fluids. It provides long termprotection against bacterial, fungal and algae growth in working solution.

Advantages:1、Broad Spectrum as a bactericide, viruscide, fungicide, and algaecide2、Controlled release technology, no leaching, no yellowing, long lasting.3、Low toxicity, America President Reward for environmental protection.4、Suitable for both oil and water based paint and coating.5、One of the best performers in 3 years out-doors exposure tests in US.6、Stable in strong ultraviolet radiation and acidic water, also stable in paint

Chemical and Physical Properties:Appearance Light yellow to blue liquidOdor MildSolubility Dissolved or dispersedStability Stable for 1 year at below 25 0C

Applications and Use Levels：Mocide DL is used primarily as a dry-film mildew protector for paint, wood plastics, woodcomposites etc. Other applications include adhesives, metal working fluid, water treatment,and printing inks. It is easily incorporated into water and solvent-based formulations. It can beadded efficiently at the first formulation stage before the grinding to achieve the evendistribution. The product exhibits good stability with ionic surfactants and emulsifiers.Recommended use levels are between 0.5-1.5% based on the wet formulation weight.Handling：When handle Mocide DL, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Transport and Storage：

Mocide DL is a non hazardous substance in the sense of the transportation regulations.

Packaging：20kg、200kg drums

Biocides for Latex emulsion



Biocide CI-M 1.5%CMIT/MIT

0.05-0.4%

Board spectrum,bactericide, fungicide,no formaldehyde

Use pH range <8.5;Temperature <40 0C

Biocide BRC-R BronopolCMIT/MIT

0.05-0.4%


Use pH range <9;Temperature <40 0C

Biocide DC-plus DMDMHCMIT/MIT

0.05-0.4%

Board spectrum,bactericide, fungicide,NaNO3 stabilized

Use pH range <8.5;Temperature <40 0C

Biocide MBS BIT, CIT, MIT(5.0%) Solution

0.05-0.8%



Biocide BIT-10 BIT (>8.5%) 0.05-0.4%



Biocide SPT-plus BIT and other(10%) Solution

0.05-0.8%

Board spectrum,bactericide andfungicide, noformaldehyde


Biocide CI-M: An in-can preservative

Biocide CI-M is a liquid no gelling biocide for latex, it has been used as a preservative in a variety ofindustrial applications, which include paints, slurries, dispersed pigments, adhesives, latex emulsion. Theactive ingredient provides broad-spectrum activity against common bacteria and fungi. Biocide CI-M isapproved by EPA and FDA for industrial and cosmetic applications. It is highly recommended for watercontaining systems with pH 2 to 9.

Product Benefits:1. Chemically stable at pH 2-9, no Mg(NO3)2 salt, monovalent stabilized2. Broad spectrum efficacy for fungi and algae3. Low use level, no VOC and odor, no APE surfactant4. Compatible with many latex polymer, no gelling



Concentration 1.5 %Appearance Yellow solutionStability Stable for 1 year @ 25 oC

Applications and Application Methods:Biocide CI-M is widely use in cosmetics, personal cares, paints, slurries, dispersed pigments, adhesives,latex emulsion, processing water and other neutral pH systems. Biocide CI-M can be added at any stagesof the production. WUXI HONOR SHINE CHEM can assist you to determine the use level in you specificproducts.





Biocide BRC-R: A non gelling preservative for latex

Biocide BRC-R is an aqueous solution micro biocide of monovalent stabilized CMIT and Bronopol; it is asuperior preservative and has been used in a variety of industrial applications, which include processwater, and water based coatings such as paints, slurries, dispersed pigments, adhesives, latex emulsions.The active ingredients provide broad-spectrum activity against common bacteria and fungi. Biocide BRCis approved by EPA and FDA for industrial and cosmetic applications and is highly recommended forwater containing systems with pH 4-8.5.

Product Benefits:1. Chemically stable in pH of 4-8.52. Broad spectrum efficacy for bacteria, fungi, and algae3. No VOC, no odor, non flammable4. Do not discolor the protected products at used levels.5. No heavy metal salts and APE surfactant6. Compatible with all surfactants and other ingredients7. Very low toxicity, best for latex, paint and coating


Active Ingredient 2-bromo-2-nitro-1, 3-propanediol (Bronopol) and CMIT/MIT.Concentration > 10.0%Appearance Clear solutionpH 4 to 7Solubility in water 100%Stability Stable for 1 year @ 25 0C

Applications and Application Methods:Biocide BRC-R has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion,processing water and other water containing systems. Biocide BRC can be added in at any stages of theproduction. WUXI HONOR SHINE CHEM can assist you in determining the use level in you specificproducts.

Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should be noticedthat a good manufacturing practices should be applied and equipment, pipes, and storage tanks should

be sanitized by Biocide DBNPA-20 regularly.




Biocide DC-plus: A low level formaldehyde preservative

Biocide DC-plus is an aqueous combinational gelling free in-can preservative and has been used in avariety of industrial applications which include cosmetics, personal care, water based coatings such aspaints, slurries, dispersed pigments, adhesives, latex emulsions, and process water. The activeingredients provide broad-spectrum activity against common bacteria and fungi. It contains DMDMH andCMIT, both has been approved by EPA and FDA for cosmetic and industrial applications. It is highlyrecommended for water containing systems with pH 2.0-9.0.

Product Benefits:1. Chemically stable in high pH formulations up to 9.02. Broad Spectrum Efficacy, good for air-space protection3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world


Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH) and CMIT/MITConcentration > 16%Appearance Colorless to pale yellow liquidpH 4-6Specific Gravity @ 25 0C 1.05 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25 0C

Applications and Application Methods:Biocide DC-plus has been used in paints, coatings, cosmetics, personal cares and other water containingsystems. Biocide DC can be added in at any stages of the production. WUXI HONOR SHINE CHEM canassist you to determine the use level in you specific products.

Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w), if the concentration used is 0.4%, theformaldehyde level will be 100 ppm in the final product. It should be noticed that a good manufacturingpractices should be applied and equipment, pipes, and storage tanks should be sanitized by BiocideDBNPA-20 regularly.




Biocide MBS is an aqueous solution of MIT, and BIT micro-biocide. It is a salt free and nogelling on latex emulsion and has been used in a variety of industrial applications, whichinclude water based coatings such as paints, slurries, dispersed pigments, adhesives, latexemulsions, and process water. The active ingredients provide broad-spectrum activity againstcommon bacteria and fungi. MIT, and BIT are approved by EPA for industrial applications andare highly recommended for water containing systems with pH 3-11.

Product Benefits:1. Chemically stable in high pH formulations up to 112. Broad Spectrum Efficacy3. No Odor, non flammable, no formaldehyde4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients6. Highly stable, no gelling on latex


Active Ingredient2-Methyl-Isothiazolin-3-one (MI) and5-Chloro-2-Methyl-Isothiazolin-3-one (CMI),1,2-benzeisothiazoline (BIT)


Applications and Application Methods:Biocide MBS has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion,process water and other high pH water containing systems. WUXI HONOR SHINE CHEM canassist you to determine the use level in you specific products. Recommended adding at the laststage of the production below 50℃.


Biocide BIT-10: An in-can preservativeBiocide BIT-10 is an aqueous solution micro biocide, which is a unique preservative and has been used in avariety of industrial applications, which include water based coatings such as paints, slurries, dispersedpigments, adhesives, latex emulsion, and processing water. The active ingredient provides broad-spectrumactivity against common bacteria and fungi. Biocide BIT-10 is approved by EPA for industrial applicationsand is highly recommended for water containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 14.2. Broad spectrum efficacy, no gelling on latex3. No VOC, no Odor, non flammable4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredient 1,2-benzeisothiazoline (BIT)Concentration 8.5-10%Appearance Amber liquidpH 12-14Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-10 has been used in paints, slurries, dispersed pigments, adhesives, latex emulsions, processwater and other high pH water containing systems. Biocide BIT-10 can be added in at any stages of theproduction. WUXI HONOR SHINE CHEM can assist you to decide the use level in you specific products.

Dosage:Typical use concentrations are in the range of 0.1-0.8% (w/w) in the final products. It should be noticed thata good manufacturing practices should be applied and equipment, pipes, and storage tanks should besanitized by Biocide DBNPA-20 regularly.





Biocide SPT-plus is an aqueous solution micro biocide; it is a unique preservative. The active ingredientprovides broad-spectrum activity against common bacteria and fungi. Biocide SPT-plus has been approvedby EPA, FDA for industrial applications. Biocide SB is highly recommended for water containing systems withpH>8.



Applications and Application Methods:Biocide SPT-plus has been used in personal care, paints, slurries, dispersed pigments, adhesives, latexemulsion, processing water and other high pH water containing systems. Biocide SPT-plus can be added inat any stages of the production. WUXI HONOR SHINE CHEM can assist you in deciding the use level in youspecific products.

Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should be noticed thata good manufacturing practices should be applied and equipment, pipes, and storage tanks should besanitized by Biocide DBNPA-20 regularly.




Adhesive, Pigment and Colorant Dispersions



Biocide CI 1.5%CMIT/MIT

0.05-0.4%


Use pH range <8.5;Temperature <40℃

Biocide MBS BIT, CIT, MIT(5.0%) Solution

0.05-0.8%



Biocide MIT-10 MIT-10(10%) 0.05-0.6%



Biocide BIT-20 BIT (20%) 0.05-0.4%



Biocide SPT-plus BIT etc (10%) 0.05-0.4%

Board spectrum,bactericide&fungicide,

no formaldehydeStable pH range 2-11

Biocide BRC orBRC-plus BRONOPOL… 0.05-0.6

%



Biocide DI DMDMH, (45%) 0.05-0.6%

Board spectrum,bactericide, fungicide Stable pH range 4-10

Biocide DC DMDMH, (45%) 0.05-0.6%

Board spectrum,bactericide, fungicide Stable pH range 4-9

BiocideDBNPA-20 DBNPA (20%) 0.02-0.2

%Board spectrum,

algaecide Stable pH range 5-9

Biocide CI: An in-can preservative

Biocide CI is a liquid biocide and has been used as a preservative in a variety of industrialapplications, which include water treatment, paper and pulping, cooling tower, waste water,wash water, water based coatings such as paints, slurries, dispersed pigments, adhesives,latex emulsion. The active ingredient provides broad-spectrum activity against commonbacteria and fungi. Biocide CI is approved by EPA and FDA for industrial and cosmeticapplications. It is highly recommended for water containing systems with pH 2 to 9.

Product Benefits:1. Chemically stable at pH 2-92. Broad spectrum efficacy for fungi and algae3. Low use level, no VOC and odor4. No APE surfactant5. Compatible with many surfactants and other ingredients



Concentration 1.50 %Appearance Green solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide CI is widely use in pulp/paper, industrial water, waste water, cosmetics, personal cares,paints, slurries, dispersed pigments, adhesives, latex emulsion, processing water and otherneutral pH systems. Biocide CI can be added at any stages of the production. WUXI HONORSHINE CHEM can assist you to determine the use level in you specific products.




Biocide MBS is an aqueous solution of CMIT, MIT, and BIT micro-biocide. It is a uniquepreservative and has been used in a variety of industrial applications, which include waterbased coatings such as paints, slurries, dispersed pigments, adhesives, latex emulsions, andprocess water. The active ingredients provide broad-spectrum activity against common bacteriaand fungi. CMIT, MIT, and BIT are approved by EPA for industrial applications and are highlyrecommended for water containing systems with pH 3-11.

Product Benefits:1. Chemically stable in high pH formulations up to 112. Broad Spectrum Efficacy3. No Odor, non flammable, no formaldehyde4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients6.Highly stable


Active Ingredient2-Methyl-Isothiazolin-3-one (MI) and5-Chloro-2-Methyl-Isothiazolin-3-one (CMI),1,2-benzeisothiazoline (BIT)


Applications and Application Methods:Biocide MBS has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion,process water and other high pH water containing systems. WUXI HONOR SHINE CHEM canassist you to determine the use level in you specific products. Recommended adding at the laststage of the production below 50℃.


Biocide MIT-10: An in-can preservative

Biocide MIT-10 is an aqueous solution micro biocide; it is a unique preservative and has beenused in a variety of industrial applications, which include water based coatings such as paints,slurries, dispersed pigments, adhesives, latex emulsions, process water. The active ingredientprovides broad-spectrum activity against common bacteria and fungi. MIT has been approvedby EPA FDA for industrial and cosmetic applications. Biocide MIT is highly recommended forwater containing systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 112. Broad Spectrum Efficacy3. VOC free, Non flammable4. Do not discolor the protected products5. No metal Salts, formaldehyde, and APE surfactant6. Compatible with all surfactants and other ingredients


Active Ingredient 2-methyl-4-isothiazolin-3-one (MIT)Molecular Formula C4H5NOSMolecular Weight 115.06Concentration 10.0%Appearance Amber liquidpH 3-5Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide MIT-10 has been used in paints, slurries, dispersed pigments, adhesives, latexemulsion, process water and other high pH water containing systems. Biocide MIT-10 can beadded in at any stages of the production. WUXI HONOR SHINE CHEM can assist you indeciding the use level in you specific products.



Biocide BIT-20 is an aqueous solution micro-biocide, which is a unique preservative and hasbeen used in a variety of industrial applications, which include water based coatings such aspaints, slurries, dispersed pigments, adhesives, latex emulsion, and process water. The activeingredient provides broad-spectrum activity against common bacteria and fungi. Biocide BIT-20is approved by EPA for industrial applications and is highly recommended for water containingsystems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 142. Broad Spectrum Efficacy3. No Odor, Non flammable4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients6. Strong stability, no change within one year from -20℃ to 40℃ The active

ingredient is still stable at 150℃

Physical and Chemical Properties:Active Ingredient 1,2-benzeisothiazoline (BIT)Concentration 20.0%Appearance Amber liquidpH 13-14Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-20 has been used in paints, slurries, dispersed pigments, adhesives, latexemulsion, processing water and other high pH water containing systems. Biocide BIT-20 can beadded in at any stages of the production. WUXI HONOR SHINE CHEM can assist you indeciding the use level in you specific products. Recommended adding at the last stage of theproduction below 100℃.









Applications and Application Methods:Biocide SPT-plus has been used in personal care, paints, slurries, dispersed pigments,adhesives, latex emulsion, processing water and other high pH water containing systems.

Biocide SPT-plus can be added in at any stages of the production. WUXI HONOR SHINECHEM can assist you in deciding the use level in you specific products.





Biocide BIT-10: An in-can preservativeBiocide BIT-10 is an aqueous solution micro biocide, which is a unique preservative and hasbeen used in a variety of industrial applications, which include water based coatings such aspaints, slurries, dispersed pigments, adhesives, latex emulsion, and processing water. Theactive ingredient provides broad-spectrum activity against common bacteria and fungi. BiocideBIT-10 is approved by EPA for industrial applications and is highly recommended for watercontaining systems with pH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 14.2. Broad Spectrum Efficacy3. No VOC, No Odor, Non flammable4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredient 1,2-benzeisothiazoline (BIT)Concentration 8.5%Appearance Amber liquidpH 12-14Specific Gravity @ 25℃ 1.03Vapor pressure 0.062 torrSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-10 has been used in paints, slurries, dispersed pigments, adhesives, latexemulsions, process water and other high pH water containing systems. Biocide BIT-10 can beadded in at any stages of the production. WUXI HONOR SHINE CHEM can assist you todecide the use level in you specific products.



Biocide BRC and BRC-plus: An in-can preservative

Biocide BRC is an aqueous solution micro biocide; it is a superior preservative and has beenused in a variety of industrial applications, which include process water, and water basedcoatings such as paints, slurries, dispersed pigments, adhesives, latex emulsions. The activeingredients provide broad-spectrum activity against common bacteria and fungi. Biocide BRC isapproved by EPA and FDA for industrial and cosmetic applications and is highly recommendedfor water containing systems with pH 4-8.5.

Product Benefits:1. Chemically stable in pH of 4-8.52. Broad spectrum efficacy for bacteria, fungi, and algae3. No VOC, No Odor, Non flammable4. Do not discolor the protected products at used levels.5. No heavy metal salts and APE surfactant6. Compatible with all surfactants and other ingredients7. Very low toxicity, best for paint and coating


Active Ingredient 2-bromo-2-nitro-1, 3-propanediol (Bronopol) and CMIT/MIT.Concentration BRC 10.0% or BRC plus 20%Appearance Clear solutionpH 4.5 to 7.0Solubility in water 100%Stability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BRC has been used in paints, slurries, dispersed pigments, adhesives, latex emulsion,processing water and other water containing systems. Biocide BRC can be added in at anystages of the production. WUXI HONOR SHINE CHEM can assist you in determining the uselevel in you specific products.


Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safetygoggles and shields for eyes are strongly advised. If the product comes in contact with the skin,

wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty ofwater and seek medical attention. The product should be stored at room temperature.



Biocide DI: An in-can preservativeBiocide DI is an aqueous in-can preservative and has been used in a variety of industrialapplications which include cosmetics, personal care, water based coatings such as paints,slurries, dispersed pigments, adhesives, latex emulsions, and process water. The activeingredients provide broad-spectrum activity against common bacteria and fungi. It containsDMDMH and IPBC, both has been approved by EPA and FDA for cosmetic and industrialapplications. It is highly recommended for water containing systems with pH 2.0-10.0.

Product Benefits:1. Chemically stable in high pH formulations up to 10.02. Broad Spectrum Efficacy, control both fungi and bacteria3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation and widely used in the world

Physical and Chemical Properties:Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH)….Concentration 45%Appearance Colorless to pale yellow liquidpH 7.0-8.0Specific Gravity @ 25℃ 1.1 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide DI has been used in cosmetics, personal cares and other water containing systems.Biocide DI can be added in at any stages of the production. WUXI HONOR SHINE CHEM canassist you to determine the use level in you specific products.Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w) in the final products. It should benoticed that a good manufacturing practices should be applied and equipment, pipes, andstorage tanks should be sanitized by Biocide DBNPA-20 regularly.Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safetygoggles and shields for eyes are strongly advised. If the product comes in contact with the skin,wash immediately with plenty of water. In case of eye contact, rinse immediately with plenty ofwater and seek medical attention. The product should be stored at room temperature.Packaging:25kg and 200 kg impervious plastic containers

Biocide DC: An in-can preservative

Biocide DC is an aqueous in-can preservative and has been used in a variety of industrialapplications which include cosmetics, personal care, water based coatings such as paints,slurries, dispersed pigments, adhesives, latex emulsions, and process water. The activeingredients provide broad-spectrum activity against common bacteria and fungi. It containsDMDMH and another preservative, both has been approved by EPA and FDA for cosmetic andindustrial applications. It is highly recommended for water containing systems with pH 2.0-9.0.

Product Benefits:1. Chemically stable in high pH formulations up to 9.02. Broad Spectrum Efficacy3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation6. Widely used in the world



Applications and Application Methods:Biocide DC has been used in paints, coatings, cosmetics, personal cares and other watercontaining systems. Biocide DC can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you to determine the use level in you specific products.




Biocide DC-plus: An low level formaldehyde preservative

Biocide DC-plus is an aqueous combinational in-can preservative and has been used in avariety of industrial applications which include cosmetics, personal care, water based coatingssuch as paints, slurries, dispersed pigments, adhesives, latex emulsions, and process water.The active ingredients provide broad-spectrum activity against common bacteria and fungi. Itcontains DMDMH and CMIT, both has been approved by EPA and FDA for cosmetic andindustrial applications. It is highly recommended for water containing systems with pH 2.0-9.0.

Product Benefits:1. Chemically stable in high pH formulations up to 9.02. Broad Spectrum Efficacy, good for air-space protection3. No heavy metal salts and APE surfactant4. Compatible with all surfactants and other ingredients5. Low toxicity and irritation, widely used in the world


Active Ingredient Dimethylol Dimethyl Hydantoin (DMDMH) and CMIT/MITConcentration > 9%Appearance Colorless to pale yellow liquidpH 4-6Specific Gravity @ 25 0C 1.05 g/mlSolubility in water InfiniteStability Stable for 1 year @ 25 0C

Applications and Application Methods:Biocide DC-plus has been used in paints, coatings, cosmetics, personal cares and other water

containing systems. Biocide DC can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you to determine the use level in you specific products.

Dosage:Typical use concentrations are in the range of 0.1-0.6% (w/w), if the concentration used is 0.4%,the formaldehyde level will be 100 ppm in the final product. It should be noticed that a goodmanufacturing practices should be applied and equipment, pipes, and storage tanks should besanitized by Biocide DBNPA-20 regularly.



Biocide DBNPA-20: A disinfectant and preservative

Biocide DBNPA-20 is a liquid fast acting disinfectant. It has been used in instrumentsensitization and industrial applications, which include poultry, water treatment, paper andpulping, cooling tower, waste water, wash water, paint and coating. The active ingredientprovides broad-spectrum activity against common bacteria, fungi, viruses, and algae. BiocideDBNPA-20 is approved by EPA for industrial applications. It is highly recommended for watercontaining systems with pH 4 to 10. It needs a co-biocide for long term protection.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level, low odor, fast acting (within a few minutes)4. Can be diluted by hard water5. Compatible with many ingredients


Active Ingredient DBNPAConcentration 20.0 % in glycolAppearance Clear to brown solutionStability Stable for 1/2 year @ 25℃

Applications and Application Methods:Biocide DBNPA-20 is also widely used in pulp/paper, industrial water, waste water, personalcares, slurries, dispersed pigments, adhesives, latex emulsion, processing water and otherwater containing systems. Biocide DBNPA-20 can be added at any stages of the production.WUXI HONOR SHINE CHEM can assist you to determine the use level in your specificproducts.

Dosage:Typical use concentrations are in the range of 0.002 -0.20% (w/w, or 10 to 2000 ppm) in thefinal products or as a disinfectant. It should be noticed that a good manufacturing practicesshould be applied and equipment, pipes, and storage tanks should be sanitized by BiocideDBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. Theproduct should be stored at room temperature.


Transport：Non-dangerous article

Disinfectants

ProductsName Active ingredient Use level

(w/w) Characteristics Remark

BiocideDDAC-plus

Didecyl dimethylammonium chloride 0.5-1% Industrial use

onlyUse pHrange 4-10

Biocide BQI IPBC and Quat 0.5-2% All applications Use pHrange 4-10

DisinfectantCT-L Oxidizer 2-20% All applications Use pH

range 6-10

Biocide DDAC-plus: A disinfectant

Biocide DDAC plus is a liquid disinfectant and has been used in human, instrumentsensitization and industrial applications, which include poultry, water treatment, paper andpulping, cooling tower, waste water, wash water. The active ingredients provide broad-spectrumactivity against common bacteria, fungi, viruses, and algae. Biocide DDAC- plus is approved byEPA and FDA for pharmaceutical, industrial and cosmetic applications. It is highlyrecommended for water containing systems with pH 4 to 10.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level and low odor4. Can be diluted by hard water5. Compatible with many ingredients, but not ionic surfactants6. Widely used in control treatment for all surfaces to eliminate fungi bacteria and

viruses


Active Ingredient Didecyl dimethyl ammonium chloride etc.Concentration 11.0 %Appearance Yellow solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Garden and Farm applicationsRemove all animals, poultry, and feed from premises, vehicles, and enclosures. Remove alllitter and manure from floors, walls and surface of barns, pens, stalls, chutes and other facilitiesoccupied or transverse by animals or poultry. Empty all troughs, racks and other feeding andwatering appliances. Thoroughly clean all surfaces with soap or detergent and rinse with water.To disinfect, saturate all surfaces with a solution of 100 times dilution of Biocide DDAC plus for10 to 20 minutes. All treated surfaces should rinse with tap water before use.

Biocide DDAC plus is also widely used in pulp/paper, industrial water, waste water, personal,processing water and other water containing systems. Biocide DDAC plus can be added at anystages of the production. WUXI HONOR SHINE CHEM can assist you to determine the uselevel in your specific products.

Dosage:Typical use concentrations are in the range of 0.05 -2% (w/w, 2000 to 50 time dilutions) in thefinal products or as disinfectant. It should be noticed that a good manufacturing practicesshould be applied and equipment, pipes, and storage tanks should be sanitized by BiocideDBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. Theproduct should be stored at room temperature. Cover tightly after using.

Packaging:25kg and 200 kg plastic containers

Biocide BQI: A disinfectant

Biocide BQI is a liquid disinfectant and has been used in human, instrument sensitization andindustrial applications, which include poultry, water treatment, paper and pulping, cooling tower,waste water, wash water. The active ingredients provide broad-spectrum activity againstcommon bacteria, fungi, viruses, and algae. Biocide BQI is approved by EPA and FDA forpharmaceutical, industrial and cosmetic applications. It is highly recommended for watercontaining systems with pH 4 to 10.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level and low odor4. Can be diluted by hard water5. Compatible with many ingredients6. Widely used as wall coating fungicide and disinfectant to improve living

environment7. Widely used in machinery equipments, exterior coatings, plastics surface

treatment


Active Ingredient IPBC and QuatConcentration 35.0 %Appearance Yellow solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BQI is widely used in pulp/paper, industrial water, waste water, cosmetics, personalcares, slurries, dispersed pigments, adhesives, latex emulsion, processing water and otherwater containing systems. Biocide BQI can be added at any stages of the production. WUXIHONOR SHINE CHEM can assist you to determine the use level in your specific products.

Dosage:Typical use concentrations are in the range of 0.5 -2% (w/w) in the final products or asdisinfectant. It should be noticed that a good manufacturing practices should be applied andequipment, pipes, and storage tanks should be sanitized by Biocide DBNPA-20 regularly.



Shelf Life:1 year

Disinfectant CT-L

A universal disinfectant concentrate

CT-L is a universal liquid disinfectant and has been widely used in hospital, household, army, food,poultry, and industrial applications, it is stabilized oxidative and enforced disinfectant, it providesbroad-spectrum activity against common bacteria, fungi, viruses. CT-L can be used in all applications asa superior disinfectant.

Micro-organisms have caused human suffering, lost productivity and economic damage. They do notaffect only people, but also livestock, crops and even inanimate objects.

Food-born bacteria not only cost money through spoilage, they can also cause infection and poisoning.

Vaccination schemes, antibiotics and other medications have only limited effectiveness. Some bacteriaand fungi produce toxins that cannot be counteracted. Many microbial diseases cannot be cured. New,resistant strains of micro-organisms are appearing.

The best means of combating disease is prevention. The best means of prevention is a universaldisinfectant that is safe, easy to use and effective against all bacteria, fungi and viruses detrimental tothe health of humans, animals and plants.

Product Benefits:

Hospital grade disinfection, eliminate all harmful microorganismsHealth promoter, best quality, fast acting, broad spectrum, low toxicityVery stable, safe for human and environment at use levelControl toughest diseases and prevent world epidemicsUnlike other chlorine-based disinfectants, the formation of harmful chlorinated organic compounds(AOX) is negligible with CT-L


Active Ingredient Chloramine T trihydrate etc.Concentration 10.0 %Appearance Clear solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:

For general disinfection:Dilute CT-L 10-50 times and then spray it directly onto the subjects, wait a few minutes, either wipe outthe solution or leave it on;Soak the subjects into Diluted CT-L solution for 10 minutes before rinse it off.

For stain removal in white cloth:Dilute CT-L 3 times and then spray it onto the stain area for 10-20 minutes, and then wash with washingmachine or hands to remove the stain.For odor control:Dilute it 5 times and then spray the it onto the subject, wait for 10 minutes before clean it up or leave iton..

Handling and Storage:

Use of personal protective equipment such as safety goggles for eyes is advised.

Packaging: 50 ml, 500 ml, and 1000 ml spray bottles25 kg and 200 kg plastic containers

Biocides for Marine Paints

ProductName

Activeingredient


MocideDC-30 DCOIT (30%) 5.0-15.0% Used in marine paints

as an algaecideMildewcide,algaecide

MocideDS-30 DCOIT (30%) 5.0-15.0% Used in marine paints

as an algaecideMildewcide,algaecide

Mocide ZPT Pyrithion 96% 3-10% Used in marine paintsas an algaecide

Mildewcide,algaecide

Mocide CPTPyrithion 96% 3-10% Used in marine paints

as an algaecide

Mildewcide,algaecide

Mocide DCOIT-30: An algaecide for marine coatings

Mocide DCOIT-30 is a powerful fungicide and algaecide and offers highly effective,broad-spectrum protection against degradation, discoloration and defacement caused bybarnacles, tubeworms, hydroids, bryozoa, tunicates, diatoms and mold, mildew, and algae. Ithas been used in antifouling paints as algaecide for many years and it is one of the bestreplacements for TBTO.

Advantages:1. Stable in marine paint formulations and long lasting in films2. Controlled release technology, broad spectrum activity against bacterial slime,

algae, barnacles, tubeworms, hydroids, bryozoa, tunicates and diatoms.3. Provides long-lasting control. Meets or exceeds the needs of the majority of the

world's commercial fleet.4. Free from heavy metals and when released into the environment, Mocide

DCOIT-30 is degraded quickly in both sediment and sea water to prevent thebioaccumulations.

5. Stable in strong ultraviolet radiation and acidic water.

Chemical and Physical Properties：

Appearance Yellow to brown solution in XyleneActive ingredient DCOIT (30%)pH (20℃) N/AParticle size NASolubility Disperse in aqueous and oil based paintsStability Stable for 1 year at below 30℃

Applications and Use Levels：Mocide DCOIT-30 is used primarily as a dry-film mildew and algae protector for marine paints,coatings. It is easily incorporated into solvent-based formulations. It can be added efficiently atthe first formulation stage before the grinding to achieve the even distribution. The productexhibits good stability with ionic surfactants and emulsifiers.

Recommended use levels are between 0.3 – 1.0% based on the wet formulation weight inexterior oil based coatings; 5-15% in marine coatings. In order to achieve the best results, it isrecommended combining it with 20-50% CuO in formulations.

Transport and Storage：Mocide DCOIT-30 is a hazardous substance in the sense of the transportation regulations inUS standards.

Handling：When handle Mocide DCOIT-30, the usual precautions for handling of chemicals should befollowed. Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean theskin with plenty of water and soap, flush eyes with water and buffer solution.

Packaging：20kg、200kg plastic drum

Mocide DS-30: An algaecide for marine coatings

Mocide DS-30 is a powerful fungicide and algaecide and offers highly effective, broad-spectrumprotection against degradation, discoloration and defacement caused by barnacles, tubeworms,hydroids, bryozoa, tunicates, diatoms and algae. It has been used in antifouling paints as aalgaecide and animal repllent for many years and it is one of the best replacements for TBTO.

Advantages:1. Stable in marine paint formulations and long lasting in films2. Controlled release technology, broad spectrum activity against bacterial slime,

algae, barnacles, tubeworms, hydroids, bryozoa, tunicates and diatoms.3. Provides long-lasting control. Meets or exceeds the needs of the majority of the

world's commercial fleet.4. Free from heavy metals and when released into the environment, Mocide DS-30 is

degraded quickly in both sediment and sea water to prevent the bioaccumulations.5. Stable in strong ultraviolet radiation and acidic water.

Chemical and Physical Properties：

Appearance Yellow powderActive ingredient DCOIT (30%)pH (20℃) N/AParticle size <50 umSolubility Disperse in aqueous and oil based paintsStability Stable for 1 year at below 25℃

Applications and Use Levels：Mocide DS-30 is easily incorporated into solvent-based formulations. It can be added efficientlyat the first formulation stage before the grinding to achieve the even distribution. The productexhibits good stability with ionic surfactants and emulsifiers.

Recommended use levels are between 0.3 – 1.0% based on the wet formulation weight inexterior oil based coatings; 5-15% in marine coatings. In order to achieve the best results, it isrecommended combining it with 20-50% CuO in formulations.

Transport and Storage：Mocide DS-30 is a non hazardous substance in the sense of the transportation regulations inUS standards.

Handling：When handle Mocide DS-30, the usual precautions for handling of chemicals should befollowed. Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean theskin with plenty of water and soap, flush eyes with water and buffer solution.

Packaging：20kg、200kg in a plastic bag and cardboard drum

Mocide –ZPT: A fungicide and algaecide for marine paints

Mocide-ZPT fungicide and algaecide offers highly effective, broad-spectrum protection againstdegradation, discoloration and defacement caused by mold, mildew, and algae. It has a uniquechemistry and is widely used in the world. It is also used to formulate 48% ZPT dispersion

Advantages1. Broad spectrum and long lasting2. Compatible with many ingredients3. Broad pH range stability (3-12).4. Can be used in aqueous and oil based systems5. Stable at high temperature6. No VOC, also suitable in plastic application


Appearance Off-white PowderActive ingredient > 97.0%pH (20℃) N/ASolubility Disperse in aqueous and oil based systemsStability Stable for two years at temperature below 40℃

Applications and Use LevelsMocide-ZPT is used primarily as a dry-film mildew protector for marine paint. Other applicationsinclude plastic, adhesives, metalworking fluids. It should be incorporated into water-based orsolvent-based formulations at early stage of production. The product exhibits good stability withionic surfactants and emulsifiers. Recommended use levels are between 0.2 – 1.0% based onthe wet formulation weight. For marine coating, it is recommended 3-10%.It may gel the paint formulations, so testing on compatibility is necessary.

Packaging50 kg fiber drum

Transport and StorageMocide-ZPT is a hazardous substance in the sense of the transport regulation in US standard.

HandlingWhen handle Mocide -ZPT, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Mocide-CPT: A fungicide and algaecide for marine coatings

Mocide-CPT, a fungicide and algaecide, offers highly effective, broad-spectrum protectionagainst degradation, discoloration and defacement caused by marine organisms and algae. Ithas a unique chemistry. It is one of the most effective biocides for replacing Tin compounds inantifouling paint.

Advantages1. Broad spectrum as fungicide and algaecide, long lasting in film2. Controlled release technology, no leaching, no gelling3. Low toxicity and small particle size.4. Broad pH range stability (5-12).5. VOC free, sunlight and thermal stable.6. No flash point and easy to use.


Appearance Green powderActive ingredient > 97.0%pH (20℃) 7-8 at 10% water dispersionParticle size 2-10 μmSolubility Disperse in oil based productsStability Stable for two years at below 40℃

Applications and Use LevelsMocide-CPT is used primarily as an antifouling agent in marine coatings to replace toxic Tincompounds. It should be added at early stage of formulation to achieve an even distribution.The product exhibits good stability with ionic surfactants and emulsifiers.Recommended use levels are between 3 to 10% based on the paint formulation.

Packaging25kg、100kg fiber drum

Transport and StorageMocide-CPT is a hazardous substance in the sense of the transport regulation in US standard.

HandlingWhen handle Mocide-CPT, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Biocides for plastics

ProductName

ActiveIngredient


MocideCC-P

Carbendazim…(98%) 0.2-1.0%

Powder, stable in allprocess temperature, broadspectrum

Fungicide

MocideOIT-10 OIT (10%) 0.2-1.0%

Liquid, stable in all processtemperature, broadspectrum

MocideDCOIT-10 DCOIT (10%) 0.2-1.0%

Liquid, stable in all processtemperature, broadspectrum

MocideZPT Zinc Pyrithion 0.2-1.0%

Powder, stable in allprocess temperature, broadspectrum fungicide andalgaecide

Mocide CC-P: A fungicide for interior/exterior plastics

Mocide CC-P is a powder fungicide and offers highly effective, broad-spectrum protectionagainst degradation, discoloration and defacement caused by mold, mildew, and algae inplastics. It has a unique and balanced composition of two powerful dry film fungicides. It is oneof the best fungicides in the world.

Advantages:1. Broad Spectrum as fungicide and long lasting in plastics2. Controlled release technology, no leaching, no yellowing.3. Low toxicity, no VOC, small particle sizes, sunlight and thermal stable.4. No flash point and easy to use.5. Best performers in five years out-door exposure tests.6. Stable in strong ultraviolet radiation and acidic water


Appearance White to gray powderActive ingredient > 97.0%pH (20℃) N/AParticle size 4-30 μmSolubility Disperse in aqueous and oil based systemsStability Stable for 1 year at below 40℃

Applications and Use Levels：Mocide CC-P is used primarily as a dry-film mildew protector for plastics, leather, paint,coatings, stains, paper, wood etc. Other applications include adhesives, and printing inks. Itis easily incorporated into plastics.Recommended use levels are between 0.3 – 1.5% base on the formulation weight.

Toxicity：Acute toxicity LD50： >5000 mg /kgDermal toxicity LD50：>5000 mg/kg (rabbit)Chinese toxicity standard: lowForeign toxicity standard: WHO-Table 5Water and soil: main microorganism solubility Koc200-250, time of solution in environment 6-12months;

Transport and Storage：Mocide CC-P is a hazardous substance in the sense of the transportation regulations in USstandards.

Handling：When handle Mocide CC-P, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.


Mocide OIT-10: A fungicide for interior/exterior plastics

Mocide OIT-10 is a 10% solution of 2-n-octyl-4-isothiazoline-3-one in a plasticizer carrier. It is apowerful fungicide and offers highly effective, broad-spectrum protection against degradation,discoloration and defacement caused by mold, mildew, and algae on plastics surfaces. It willprovide long term protection against bacterial, fungal growth on Vinyl, polyurethane and otherpolymeric compositions.

Advantages:1. Broad Spectrum as a bactericide and fungicide and long lasting in plastics2. Controlled release technology, less leaching, no yellowing.3. Low toxicity, VOC free, sunlight and thermal stable.4. High flash point and easy to use.5. On one of the best performers in 3 years out-door exposure tests.6. Stable in strong ultraviolet radiation and acidic water.


Appearance Light yellow colorActive ingredient 10.0%Density 1.0-1.2 g/mlOdor MildSolubility Dissolve in plasticsStability Stable for 1 year at below 40℃

Applications and Use Levels：Mocide OIT-10 is used primarily as a dry-film mildew protector for plastics and solvent-basedformulations.Recommended use levels are between 1.0-3.0% based on formulation weight.Mocide OIT-10 is a hazardous substance in the sense of the transportation regulations.

Handling：When handle Mocide OIT-10, the usual precautions for handling of chemicals should befollowed. Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean theskin with plenty of water and soap, flush eyes with water and buffer solution.

Transport and Storage：Mocide OIT-10 is a hazardous substance in the sense of the transportation regulations.


Mocide DCOIT-10: A fungicide for interior/exterior plastics

Mocide DCOIT-10 is a 10% solution of 4,5-dichloro-2-n-octyl-4-isothiazoline-3-one in aplasticizer carrier. It is a bactericide, algaecide and fungicide and offers highly effective,broad-spectrum protection against degradation, discoloration and defacement caused by mold,mildew, and algae on plastics surfaces. It will provide long term protection against bacterial,fungal growth on Vinyl, polyurethane and other polymeric compositions.

Advantages:1. Broad Spectrum as a bactericide and fungicide and long lasting in plastics2. Controlled release technology, no leaching, no yellowing.3. Low toxicity, VOC free, sunlight and thermal stable.4. High flash point and easy to use.5. On one of the best performers in 3 years out-door exposure tests.6. Stable in strong ultraviolet radiation and acidic water

Chemical and Physical Properties:Appearance Light yellow colorActive ingredient 10.0%Density 1.1-1.3 g/mlOdor MildSolubility Dissolve in plasticsStability Stable for 1 year at below 40℃

Applications and Use Levels：Mocide DCOIT-10 is used primarily as a dry-film mildew protector for plastics or solvent-basedformulations. It can be added efficiently at the first formulation stage before the grinding toachieve the even distribution. The product exhibits good stability with ionic surfactants andemulsifiers.Recommended use levels are between 1.5-3.0% based on the formulation weight.

Handling：When handle Mocide DCOIT-10, the usual precautions for handling of chemicals should befollowed. Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean theskin with plenty of water and soap, flush eyes with water and buffer solution.

Transport and Storage：Mocide DCOIT-10 is a hazardous substance in the sense of the transportation regulations.


Mocide –ZPT: A fungicide and algaecide for plastics

Mocide-ZPT fungicide offers highly effective, broad-spectrum protection against degradation,discoloration and defacement caused by mold, mildew, and algae. It has a unique chemistryand is widely used in the world. It is also used to formulate many ZPT containing products

Advantages1. Broad spectrum and long lasting2. Compatible with many ingredients3. Broad pH range stability (3-12).4. Can be used in aqueous and oil based systems5. Stable at high temperature6. No VOC, suitable in plastic application


Appearance Off-white PowderActive ingredient > 97.0%pH (20℃) N/ASolubility Disperse in aqueous and oil based systemsStability Stable for two years at temperature below 40℃

Applications and Use LevelsMocide-ZPT is used primarily as a dry-film mildew protector for plastics, wood, shoes, etc.Recommended use levels are between 0.2 – 1.0% based on the formulation weight.

Packaging50kg fiber drum

Transport and StorageMocide-ZPT is a hazardous substance in the sense of the transport regulation in US standard.

HandlingWhen handle Mocide -ZPT, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Biocide for Leather

Product Name Use level (w/w) Characteristics RemarkBiocide 46L 0.05-0.2% Bactericide, fungicide Stable at pH 3-9, used in soaking

water processBiocide 40L 0.05-0.2% Bactericide, fungicide Stable at high pH, used in soaking

water processBiocide 42L 0.05-0.2% Bactericide, fungicide Stable at high pH, used in soaking

water processBiocide BIT-20 0.05-0.2% Bactericide, fungicide Stable at high pH, best for fat liquorMocide IO 0.1-0.3% Fungicide High efficacy on TCMTB resistant

moldsMocide 30L-plus 0.1-0.3% Fungicide, bactericide High efficacy on TCMTB resistant

moldsMocide CC-O 0.1-0.3% Fungicide, bactericide High efficacy on TCMTB resistant

moldsMocide WD 0.1-0.3% Fungicide, bactericide Wet blue leather surface, low costMocide KM 0.1-0.3% Fungicide, bactericide Wet blue leather surface, long term

protectionMocideTCMTB-30

0.1-0.3% Fungicide, bactericide Good moldcide, widely used in theworld

Biocide 40L: A water processing biocide for leather

Biocide 40L is a liquid biocide and has been used as a leather processing water protector, it is also usedin other industrial applications, including water treatment, paper and pulping, cooling tower, waste water,wash water, water based coatings such as paints, slurries, dispersed pigments, adhesives, latex emulsion.The active ingredient provides broad-spectrum activity against common bacteria and fungi. It is highlyrecommended for water containing systems with pH 2 to 12.

Product Benefits:1. Stable at pH 2-12, most common used leather biocide2. Broad spectrum efficacy for bacteria, fungi and algae3. Low use level, no VOC, No APE surfactant4. Compatible with many surfactants and other ingredients5. No formaldehyde; no flammable; low toxicity;6. Reasonable price; no influence to environment;


Active Ingredient Sodium dimethyl dithio carbamate, etcConcentration >32 %Appearance Greenish solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:For leather process water, it is recommended 0.05 to 0.2%, for other applications including pulp/paper,industrial water, oilfield, 30-250 ppm.




Biocide 42L: A water processing biocide for leather

Biocide 42L is a combination liquid biocide and has been used as a leather processing water protector,it is also used in other industrial applications, which include water treatment, paper and pulping, coolingtower, waste water, wash water, water based coatings such as paints, slurries, dispersed pigments,adhesives, latex emulsion. The active ingredient provides broad-spectrum activity against commonbacteria and fungi. It is highly recommended for water containing systems with pH 2 to 12.

Product Benefits:1. Stable at pH 2-12, most common used leather biocide2. Broad spectrum efficacy for bacteria, fungi and algae, no resistance3. Low use level, no VOC, No APE surfactant4. Compatible with many surfactants and other ingredients5. No formaldehyde; no flammable; low toxicity;6. Reasonable price; no influence to environment;


Active Ingredient Sodium dimethyl dithio carbamate, SPT, etcConcentration >34 %Appearance Greenish solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:For leather process water, it is recommended 0.05 to 0.2%, for other applications including pulp/paper,industrial water, oilfield, 30-250 ppm.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety gogglesand shields for eyes are strongly advised. If the product comes in contact with the skin, washimmediately with plenty of water. In case of eye contact, rinse immediately with plenty of water and seekmedical attention. The product should be stored at room temperature.



Biocide BIT-20: An in-can preservative for process oil

Biocide BIT-20 is an aqueous solution micro-biocide, it is the best choice to replace otherBIT-20 in leather process oil, it overcomes BIT’s disadvantages of less activity on mold andalgae, it also used in water based coatings such as paints, slurries, dispersed pigments,adhesives, latex emulsion, and process water. The active ingredient provides broad-spectrumactivity against common bacteria and fungi. The actives of Biocide BIT-20 has been approvedby EPA for industrial applications and is highly recommended for water containing systems withpH>8.

Product Benefits:1. Chemically stable in high pH formulations up to 142. Broad spectrum efficacy on bacteria, fungi, algae3. Non flammable, reasonable price compared to BIT-20, better performer4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients

Physical and Chemical Properties:Active Ingredients 1,2-benzeisothiazoline (BIT) etcConcentration >20.0%Appearance Amber liquidpH 10-12Specific Gravity @ 25℃ 1.1Solubility in water InfiniteStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BIT-20 has been used leather, metal working fluid, foundation solution, paints, slurries,dispersed pigments, adhesives, latex emulsion, processing water and other high pH watercontaining systems. Biocide BIT-20 can be added in at any stages of the production. WUXIHONOR SHINE CHEM can assist you in deciding the use level in you specific products.Recommended adding at the last stage of the production below 40℃.

Dosage:Typical use concentrations are in the range of 0.1-0.3% for leather process oil (w/w). For metalworking fluid, foundation solution concentrates; it is suggested to use 2-3%. It should benoticed that a good manufacturing practices should be applied and equipment, pipes, andstorage tanks should be sanitized by Biocide DBNPA-20 regularly.


Mocide CC-O A fungicide for leather

Mocide CC-O fungicide offers highly effective, broad-spectrum protection for leather surfacesagainst degradation, discoloration and defacement caused by mold, mildew. It has a uniqueand balanced composition of two powerful fungicides. It is one of the best fungicides in theworld and best choice for replacement of TCMTB.

Advantages:1. Broad spectrum as fungicide and long lasting on leather surfaces2. Controlled release technology, no leaching, no yellowing.3. Low toxicity and can be added into a product at any stage of production.4. Broad pH range stability (5-10).5. Low VOC, small particle sizes, dispersed equality; thermal stable6. No flash point and easy to use and transport;

Chemical and Physical Properties:Appearance White dispersionActive ingredient 35%pH (20 0C) 6-8Particle size 4-30 μmSolubility Disperse in aqueous and some oil productsFreezing point -5 0CDensity 1.2 g/mlViscosity 72-90 ku @ 25 0CStability Stable for 1 year at below 25 0C

Applications and Use Levels:Mocide CC-O is used primarily as a dry-film mildew protector for leather, paint, coatings, stains,paper, plastics, wood etc. Other applications include sapstain control. It is easily incorporatedinto water-based formulations. It can be added efficiently at the appropriate formulation stage.The product exhibits good stability with ionic surfactants and emulsifiers. Recommended uselevels are between 0.1 – 2.5%. For leather, the use level is about 0.1-0.3%


Packaging:20kg、200kg impervious plastic drum

Transport and Storage:Mocide CC-O is non hazardous substance in the sense of the transport regulation in USstandard. No special demand, PE plastics drum.12 months (25 0C).

Handling:When handle Mocide CC-O, the usual precautions for handling of chemicals should be followed.Avoid contact with skin, wear goggles and gloves. In the event of a spillage, clean the skin withplenty of water and soap, flush eyes with water and buffer solution.

Mocide BQI: A fungicide for leather

Mocide BQI is a superior liquid moldcide and disinfectant, it has been used in leather andindustrial applications, the active ingredients provide broad-spectrum activity against commonbacteria, fungi, viruses. The actives of Mocide BQI are approved by EPA and FDA for leather,and cosmetic applications. It is highly recommended for water containing systems with pH 4 to10.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level and low odor4. Can be diluted by water5. Compatible with many ingredients


Active Ingredient IPBC etcConcentration 35.0 %Appearance Yellow solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Mocide BQI is widely used in leather industry and other water containing systems. Mocide BQIis primarily used for spray on or soak in the contaminated leather for clearing and disinfectionto prevent further spoils; it is also used as a disinfectant for equipment, floor, wall, andprocessing water. It is recommended that do not put this product with anionic surfactants andhigh concentration salt water systems because it contains quat components. WUXI HONORSHINE CHEM can assist you to determine the use level in your specific application.

Dosage:Typical use concentrations are in the ranges of 0.5 to 2.0% (w/w) in water for cleaning anddisinfection.

Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. Theproduct should be stored at room temperature, cover tightly after using. Shelf-life 1 year at 250C.


Mocide TCMTB-30: A fungicide for leather

Mocide TCMTB-30 is a fungicide and especially developed for wet blue protection againstmould and fungus attack. It is PCP and phenol derivatives free product.

Product Benefits:1. Chemically stable at pH 4-92. Broad spectrum efficacy for bacteria, fungi3. Low use level and low odor4. Compatible with many ingredients

Physical and Chemical Properties:Appearance Clear brown liquidNature 2-Thio Cyanato Methyl Thio benzothiazole (TCMTB)Activity% 30 (TCMTB)pH (1:10 solution) 5 - 6Flash Point 130 0CSolubility Miscible with waterSafety This product slightly is toxic. for more information refer to MSDSStability Stable for 1 year @ 25 0C

Applications and Application Methods:Mocide TCMTB-30 must be added as an emulsion in order to assure a uniform distribution.This emulsion must be prepared just prior to use. Leathers which are properly treated withTCMTB-30 have shown good resistance to the fungus attack under storage conditions. Forlong term preservation, it is advised to use a higher dosage of the product and finally applyinga uniform superficial spraying prior to storage.

Dosage:Soaking Up to 0.05% based on raw weight

Pickling Up to 0.1% based on pickled weight and before acids addition

Tanning(Wet blue) 0.1 - 0.3% based on pickled weight and at the end of chrome tanning

Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. Theproduct should be stored at room temperature, cover tightly after using. Shelf-life 1 year at 25C.


Biocides for wipe and sponges

ProductName

Activeingredient

Use level(w/w)

Characteristics Remark

Biocide BQI IPBC andQuat

0.2-0.4% Bactericide, fungicide,algaecide, viruscide,used in high qualityproducts

Not compatible withionic surfactants

BiocideSPT-plus

BIT and SPT. 0.2-0.4% Bactericide, fungicide,high quality products

Use pH range 4-12,Bactericide andfungicide for wipe

Biocide BQI: A disinfectant and preservativeBiocide BQI is a liquid disinfectant and preservative and has been used in human, instrumentsensitization and industrial applications, which include wipe, leather, sponge, poultry, the activeingredients provide broad-spectrum activity against common bacteria, fungi, viruses, and algae.Biocide BQI is approved by EPA and FDA for pharmaceutical, industrial and cosmeticapplications. It is highly recommended for water containing systems with pH 4 to 10.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level and low odor4. Can be diluted by hard water5. Compatible with many ingredients6. Widely used as wall coating fungicide and disinfectant to improve living

environment

Physical and Chemical Properties:Active Ingredient IPBC and QuatConcentration 35.0 %Appearance Yellow solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BQI is widely used in personal cares, wipe, leather, sponge, processing water andother water containing systems. Biocide BQI can be added at any stages of the production.WUXI HONOR SHINE CHEM can assist you to determine the use level in your specificproducts.

Dosage:Typical use concentrations are in the range of 0.05 -1.0% (w/w) in the final products or asdisinfectant and preservative. It should be noticed that a good manufacturing practices shouldbe applied and equipment, pipes, and storage tanks should be sanitized by Biocide DBNPA-20regularly.


Packaging:25kg and 200 kg plastic containers.

Biocides for wood treatment and protection

ProductName

ActiveIngredient

Use level(w/w)

Characteristics Remark

BiocideBQI

IPBC andQuat

0.5-2.0% Protect wood surface from moldand mildew growth

Use pHrange 4-10

Mocide BO DDAC, OIT 0.5-2.0% Protect wood surface from moldand mildew

Use pHrange 4-10

BiocideCI-14

CIT/MIT (14%) 0.1-0.2% Protect pressure treated woodsurface from mold and mildewgrowth. Can be added into ACQ,Copper Azole, Copper HDO andother new wood preservatives asmildewcide booster

Use pHrange 4-9

- 136 -91

Biocide BQI: Amildewcide for wood surface treatment

Biocide BQI is a liquid fungicide for wood and wood products. It is also used in human,instrument sensitization and industrial applications, which include wipe, leather, sponge, poultry,water treatment, paper and pulping, cooling tower, waste water, wash water. The activeingredients provide broad-spectrum activity against common bacteria, fungi, viruses, and algae.Biocide BQI is approved by EPA and FDA for pharmaceutical, industrial and cosmeticapplications. It is highly recommended for water containing systems with pH 4 to 10.Product Benefits:

1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level and low odor4. Can be diluted by water in any ratio5. Compatible with many ingredients6. Widely used in wood, wood composite, equipments, exterior coatings, plastics

surface treatment

Physical and Chemical Properties:Active Ingredient IPBC and QuatConcentration 35.0 %Appearance Yellow solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide BQI is widely used in wood surface treatment, wipe, leather, sponge, processing waterand other water containing systems. Biocide BQI can be added at any stages of the production.WUXI HONOR SHINE CHEM can assist you to determine the use level in your specificproducts.Dosage:Typical use concentrations are in the range of 0.5 -2.0% (w/w) in the final products or asmoldcide. It should be noticed that a good manufacturing practices should be applied andequipment, pipes, and storage tanks should be sanitized by Biocide DBNPA-20 regularly.Handling and Storage:Use of personal protective equipment such as safety goggles and shields for eyes are stronglyadvised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. Theproduct should be stored at room temperature. Cover tightly after using.Packaging:25kg and 200 kg plastic containers

- 137 -91

Mocide BO: A moldcide and disinfectant for wood, paper, cloth and leather

Mocide BO is a liquid moldcide and disinfectant and has been used in human, instrumentsensitization and industrial applications, which include wood, paper, leather, fibers. The activeingredients provide broad-spectrum activity against common bacteria, fungi, viruses, and algae.The actives of Mocide BO are approved by EPA for industrial applications. It is highlyrecommended for water containing systems with pH 4 to 10.

Product Benefits:1. Chemically stable at pH 4-102. Broad spectrum efficacy for bacteria, fungi, viruses, and algae3. Low use level and low odor4. Can be diluted by hard water5. Compatible with many ingredients6. Widely used as wall coating fungicide and disinfectant to improve living environment7. Widely used in wood, machinery equipments, exterior coatings, plastics surface

treatment

Physical and Chemical Properites:Active Ingredient Quat and OITConcentration 50 %Appearance Yellow solutionStability Stable for 1 year @ 25 C

Applications and Application Methods:Mocide BO is widely used in wood, leather, cloth, paper and other water containing systems.Mocide BO can be added at any stages of the production. WUXI HONOR SHINE CHEM canassist you to determine the use level in your specific products.

Dosage:Typical use concentrations are in the range of 0.5 -2.0% (w/w) in the final products or asdisinfectant. It should be noticed that a good manufacturing practices should be applied andequipment, pipes, and storage tanks should be sanitized by Biocide DBNPA-20 regularly.


Packaging: 25kg and 200 kg plastic containersPeriod of validity: 1 year

- 138 -91

Biocide CI-14: Amildewcide in wood treatment

Biocide CIT/MIT-14 is a liquid mildewcide for wood surface treatment, it also used in new wood preservative systems asa booster biocide to prevent mold growth on the pressure treated wood surface during the drying time. It is a superiorpreservative in a variety of industrial applications, which include water treatment, paper and pulping, cooling tower,waste water, wash water, water based coatings such as paints, slurries, dispersed pigments, adhesives, latex emulsion.The active ingredient provides broad-spectrum activity against common bacteria, algae, and fungi. Biocide CIT/MIT 14 isapproved by EPA for industrial applications. It is highly recommended for water containing systems with pH 2 to 9. It alsocan be used to formulate many different CIT/MIT products.

Product Benefits:1. Chemically stable at pH 2-8.5;2. Broad spectrum efficacy for fungi and algae3. Low use level, non-VOC, and no formaldehyde4. No APE surfactant; low use level;5. Rational price; no letting remnant after using, no pollution to the environment;6. No flammable; easy to transport and use;7. Especially good for control of pseudomonas which is acknowledged in the worldwide;8. Compatible with many surfactants and other ingredients; can be added at any stage of production;


Active Ingredient 2-Methyl-Isothiazolin-3-one (MI) and5-Chloro-2-Methyl-Isothiazolin-3-one (CIT)

Concentration 14.0 %Appearance Clear, yellow to brown solutionStability Stable for 1 year @ 25℃

Applications and Application Methods:Biocide CIT/MIT 14 is widely used in wood treatment, pulp/paper, industrial water, waste water, personal cares, paints,slurries, dispersed pigments, adhesives, latex emulsion, processing water and other neutral pH water containingsystems. Biocide CIT/MIT 14 can be added at any stages of the production.Recommended use level in wood is about 0.5-1.0%

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles and shields foreyes are strongly advised. If the product comes in contact with the skin, wash immediately with plenty of water. In caseof eye contact, rinse immediately with plenty of water and seek medical attention. The product should be stored at roomtemperature.

Packaging:25kg, 200kg, and 1000 kg plastic containers

- 139 -91

Solid Biocides

- 140 -91

Biocide BBD: A solid biocideBiocide BBD is a solid biocide and has been used as a superior preservative in a variety of industries, whichinclude water treatment, cooling tower, waste water, wash water, water based coatings, such as paints, slurries,dispersed pigments, adhesives, latex emulsion. The active ingredients provide broad-spectrum activity againstcommon bacteria, fungi and algae. The actives of BBD are approved by EPA and FDA for industrial and cosmeticapplications. It is highly recommended for water containing systems with pH 4 to 9.

Product Benefits:1. Chemically stable at pH 4-92. Broad Spectrum Efficacy,3. Low use level, no VOC, low odor4. No heavy metal salts and APE surfactant5. Compatible with all surfactants and other ingredients6. No influence to the environment;7. Non flammable; easy to use and transport

Physical and Chemical Properites:Active Ingredients DBNPA, Bronopol…Concentration 100.0%Appearance White or pale yellow crystalpH 4.5 to 7.0 @ 10% solutionMoisture 1.0%Solubility in water About 4.0%Stability Stable for 2 year @ 25 0C

Applications and Application Methods:Biocide BBD is widely use in pulp/paper, industrial water, waste water, cosmetics, personal cares, paints, slurries,dispersed pigments, adhesives, latex emulsion, processing water and other neutral pH water containing systems.Biocide BBD can be added at any stages of the production. WUXI HONOR SHINE CHEM can assist you todetermine the use level in you specific products.

Dosage:Typical use concentrations are in the range of 0.02-0.2% (w/w) in the final products. It is suggested to use 30-150ppm in all water treatment applications. It should be noticed that a good manufacturing practices should be appliedand equipment, pipes, and storage tanks should be sanitized by Biocide DBNPA-20 regularly.

Handling and Storage:Use of personal protective equipment such as chemical impervious gloves for hands, safety goggles and shields foreyes are strongly advised. If the product comes in contact with the skin, wash immediately with plenty of water. Incase of eye contact, rinse immediately with plenty of water and seek medical attention. The product should bestored at room temperature.

Packaging: 25kg and 200 kg impervious plastic containersTransport: Not regulated

biocides products

Documents