bim from designers perspective - rob jackson
TRANSCRIPT
Open BIM Learning Xchange – Designer’s Perspective Bond Bryan Architects
Rob Jackson
Associate
University of Salford
About Bond Bryan
Introduction
BIM about Bond Bryan
Established 1987 - currently about 80 staff
4 Offices – Sheffield, Westerham (Kent), Qatar and Kuwait
Introduction
Education
including
Further Education
Sixth Form Centres
Higher Education
Schools and Academies
Commerical
including
Advanced Manufacturing
Industry / Infrastructure
Bluelight
Sport and Leisure
Office / Workplace
Hotel / Hospitality
Masterplanning and Residential
King’s Gate, Newcastle University
BIM key sectors
1
BIM Authoring Tool:
Graphisoft’s ArchiCAD
Hardware Platform:
Apple MAC
Supporting BIM Software: Tekla BIMsight, Solibri Model Viewer and Checker, gbXML export, BIM Explorer, Autodesk 3DS
BIM technology
BIM Product of the Year
Construction Computing Awards 2011
1
1994 Bond Bryan purchase ArchiCAD
BIM BIM timeline
Nuclear Advanced Manufacturing Research Centre (NAMRC), Sheffield
1994 - ArchiCAD 4.2
Sheffield Wednesday Football Ground
1
2005 Bond Bryan carry out BIM pilot project
BIM BIM timeline
1
2012 Bond Bryan use a BIM approach on 90-95% projects
BIM BIM timeline
BIM
1
BIM what is BIM?
BIM is made up of three separate but linked activities:
Building Information Modelling
is a business process that allows all stakeholders to have access to the
same information at the same time through seamless interoperability between
technology platforms
Building Information Model
is the output of the business process, a virtual computer model of a project
that holds selected data (e.g. design, quality, cost, asset etc.)
Building Information Management
provides the benefits that can be derived from the Building Information
Model. These include centralised and visual communication, early
optioneering, sustainability, efficient design, integration of other disciplines, site
control, as built documentation
[Source – Graphisoft / SmartBIM Solutions]
1
BIM what is BIM?
not just 3D data driven collaboration
cradle to grave cultural shift
1
BIM adoption
[Image Source – RIBA Seminar, Yorkshire]
Traditional
‘Lonely’ BIM *
‘Social’ BIM
* A non-collaborative 3D model produced by a single practice
BIM development
[Image Source – RIBA Seminar, Yorkshire]
BIM myths
“implementation is too costly”
“you need to replace all hardware”
“2d is the industry standard” “you need to do all design upfront”
“file sizes are massive”
“only one person can work on the model at any one time”
“you all have to be in the same room to work on the model”
“requires extensive retraining”
“it doesn’t have any real benefits”
“BIM is all about technology”
“it’s the future so I don’t need to think about it now”
“consultants will want more fees to produce model information”
“bim is revit”
“it’s a box you can pick up and buy off the shelf”
“renovation projects aren’t suitable”
“it’s only for large projects”
“it will put cost managers out of business”
“level 2 is just about producing drawings from a model”
“ifc doesn’t work”
BIM myths
“implementation is too costly”
“you need to replace all hardware”
“2d is the industry standard” “you need to do all design upfront”
“file sizes are massive”
“only one person can work on the model at any one time”
“you all have to be in the same room to work on the model”
“requires extensive retraining”
“it doesn’t have any real benefits”
“BIM is all about technology”
“it’s the future so I don’t need to think about it now”
“consultants will want more fees to produce model information”
“bim is revit”
“it’s a box you can pick up and buy off the shelf”
“renovation projects aren’t suitable”
“it’s only for large projects”
“it will put cost managers out of business”
“level 2 is just about producing drawings from a model”
“ifc doesn’t work”
BIM BIMwash
[Sources – http:changeagents.blogs.com –@ChangeAgents AEC, 2011]
BIMwash
Why we need Open BIM
BIM Level 0 – CAD
architectural dwgs structural dwgs services dwgs
contractor / client
understanding
BIM Level 1 – 2D / 3D
architectural dwgs structural dwgs services dwgs
contractor / client
structural
analysis model
services
analysis model
visualisation
model
understanding
1
architectural model structural model services model
combined collaborative model
(not editable but available to all)
data understanding analysis visualisation
BIM level 2 bim: sub-level 2 – collaboration with consultants
1
BIM standard file structures
00-000 G01 Existing Site.pln
00-000 G06 Proposed Site.pln
00-000 G01 Topographical.pln
00-000 G01 OS Plan.pln
00-000 G23 Stairs.pln
00-000 G26 Structural Frame.pln
Repeated Elements (various) 00-000 G91 Building Model 00-000 G07 GA Floor Plans.pln
00-000 G07 Fire Strat Plans.pln
00-000 Z42 Grid.pln
00-000 G08 GA SiteElevations.pln
00-000 G09 GA Sections.plnSection Lines (in same location as model)Section Details (using detail markers)
00-000 G33 Ceiling Plans.pln
Standard Building Information Model Project File Structure June 2011
00-000 G56 Lifts.pln
00-000 G01 Existing Site.pln
00-000 G06 Proposed Site.pln
00-000 G26 SE IFC Input File
3D Grid and 2D section lines (using grid)
Foundations, Retaining Structures, Slabs,Columns, Bracing, and Beams from SE
BulkheadsCanopies (attached directly to building)Ceilings (drawn as slabs with cover fill)BulkheadsCurtain WallingDetails (2D detail in detail markers overeither plan as required)Doors (including door labels)Drainage (pop-ups etc.)External WallsFF&EFire Strategy (2D lines)Floor Finishes (drawn as slabs with coverfill)Glazed Screens (including glazed screenlabels)Internal WallsMechanical, Electrical and Plumbing (MEP)(if required using MEP add-on)Lights and LampsPlant Screening (if required)People (for visualisations only)Roof and RooflightsSolar Shading (if required)Section Lines (for plan representation only)Windows (including window labels)Zones (individual rooms, gross internal andgross external areas)
LAYOUTS
00-000 G06 Site Setting Out.pln
MODEL-DATA
Stairs (individual files as required)
Architectural Building
Architectural Site
Lifts only
External Source View OnlyNo additional information in this file
Hotlink
Hotlink
Hotlink
Hotlink
Hotlink
Hotlink
Hotlink
Other Consultant Information
Existing Site InformationMeshes for levels (split into existingretained and existing to be amended)
OS Data cleaned up into BBA layers2D Data Only
Topographical survey rationalised andcleaned up into BBA layers2D Data Only
Meshes for proposed levelsPeople (for visualisations only)Proposed LevelsProposed Site Information generallyProposed Trees and other vegetationSite Co-ordinatesStreet FurnitureVehicles
Hotlink
Hotlink
e.g. catering consultant layout information(cleaned up into BBA layers)
DRAWING / DATA OUTPUTS
Publish PDF
DWG
DWG
DWG
DWG
DWG
DWG
DWG
DWG
DWG
Model Data and 2D Info
Hotlink
Model Data and 2D Info (where required)
Model Data and 2D Info (where required)
Teamworks 2 File - Located on either X3BIM Server (sheffield) or X4 BIM Server(westerham)No Layouts (viewsets set up in this file tocreate external source views)
Hotlink Information and Model DataNo Layouts
Hotlink Information and Model DataNo LayoutsNote: This file could also be a teamworksfile if required
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Publish
Early design info produced by BBA andthen replaced by SE info.SE Input Information adjusted to suitbuilding story levelsHotlink Information and Model DataNo Layouts
Model Data and/or 2D Info
2D Data Only
Bracing / Sheer WallsBeamsColumnsFoundationsRetaining StructuresSlabs
externalsourceview
00-000 G44 Sanitary Output.pln
Project Template file available from the HubA m e n d a c c o r d i n g l y f o r p r o j e c trequirements
BIM ExplorerWalkround software
External Source View OnlyNo additional information in this file
External Source View OnlyNo additional information in this file
External Source View OnlyNo additional information in this file
External Source View OnlyNo additional information in this file
hotlink
Hotlink of model
KEY 2D Data Only Model Data and 2D Info Teamwork FileHotlinks and Model Data Output2D Layout Sheets
External Source View OnlyNo additional information in this file
External Source View OnlyNo additional information in this file
Hotlink and 2D data
Solibri Model CheckerClash detection, integrity, quality and safety
Autodesk 3D StudioMax
Other (non-ArchiCAD)
Autodesk Revit Structuresor similar
Autodesk Revit MEPor similar
Integrated EnvironmentalSolutions (IES)
Renders
Movies
MODEL EXPORTS / OTHER
IFC_2x3 (*.ifc) File
.gbXML File
3DS File
.EXE (for PC) or .DMC (for MAC)
00-000 G5 MEP IFC Input File HotlinkIFC_2x3 (*.ifc) File
Visualisations
Environmental
externalsourceview
externalsourceview
externalsourceview
externalsourceview
externalsourceview
externalsourceview
externalsourceview
Tekla BIMsightClash detection (free viewer)
Autodesk NavisworksClash detection, 4D (time) and 5D (cost)
VicoClash detection, 4D (time) and 5D (cost)
Syncro4D (time)
4D and 5D - Clash detection, costingand programming
Cobie2UK government standard for fm data
6D - Facilities management
IFC_2x3 (*.ifc) File
00-000 G32 Door Schedule
Schedules created directly from buildingmodel
Print EXCEL
Solibri Model ViewerClash detection (free viewer)
Other consultants
Hotlink
BIM software
3D model
Autodesk
revit architecture
revit mep
revit structures
CAD MEP+
Bentley
architecture
Gehry Technologies
digital project : designer
Graphisoft (owned by
Nemetschek)
archicad and archicad solo
Nemetschek
Vectorworks
1
BIM level 2 bim: sub-level 2 – collaboration with design team
other software
data interrogation –
environmental analysis
e.g.
Design Builder
EcoDesigner
Ecotect
Green Building Studio
Integrated Environmental Solutions (IES)
etc.
[Images – Leicester College – Ecotect Analysis]
1
BIM level 2 bim: sub-level 2 – collaboration with design team
Sharing models with others
physical model - services
e.g.
4MSA – 4M FineELEC, HVAC, SANI
Autodesk – CADduct, CADmep+ and
Revit MEP
Bentley Building – Electrical and
Mechanical
Data Design System ASA - DDS-CAD
Design Master Software, Inc. –
Electrical, HVAC and Plumbing
etc.
1
BIM level 2 bim: sub-level 2 – collaboration with design team
other software
physical model – structures
e.g.
Revit Structures
Tekla Structures
etc.
1
“arms race to become the Tesco of the construction industry”
[Quote - Simon Rawlingson, Head of Research and Strategic Insight, Strategy and Transformation, EC Harris 2011
Images – Company websites]
BIM why now?
BIM software
4D/5D cost & time
Asite (web service)
Autodesk
navisworks
Solibri
model viewer (clash detection – free)
model checker
Synchro (4d only)
Tekla
BIMsight (free)
combine models and clash detect
Vico
BIM software
6D facilities management
ArtrA
Archibus
Bentley
assetwise and facilities
Cobie2 (government standard)
EcoDomus
FM: Systems
Icon (revit only)
Onuma System
Vintocon ArchiFM
1
BIM an open solution
1
BIM an open solution
1
[Image courtesy of Graphisoft]
IFC!
BIM standards – industry foundation classes (ifc)
1
[Source – Page 40 – Strategy Paper for the Government Construction Client Group From the BIM Industry Working Group]
BIM ifc at level 2
IFC isn’t perfect (but that doesn’t mean it shouldn’t be
used)
1
BIM ifc isn’t perfect
1
IFC
BIM ifc isn’t perfect
1
IFC
BIM ifc isn’t perfect
1
IFC
correction factor required
BIM ifc isn’t perfect
Software differences
1
BIM understanding others software
1
BIM understanding others software
1
BIM understanding others software
1
BIM understanding others software
ArchiCAD
Objects
Bentley
Objects
Revit
Families
Vectorworks
Objects
IFC
Objects
Graphisoft
ArchiCAD
Bentley
Architecture
Autodesk
Revit
Nemetschek
Vectorworks
Sub-contractor information
BIM understanding others software
ArchiCAD
Objects
Bentley
Objects
Revit
Families
Vectorworks
Objects
IFC
Objects
Graphisoft
ArchiCAD
Bentley
Architecture
Autodesk
Revit
Nemetschek
Vectorworks
Sub-contractor information
IFC
BIM understanding others software
Understanding the IFC
1
What does an architect want
from the model?
Drawings
Schedules
Visualisation
BIM ifc and data
1
Example – Internal Door
+ data
IFC
Export
BIM ifc and data
1
BIM ifc and data
1
Export options
Know what you want to export
Control what you export
Ensure you are consistent across
all your users
BIM ifc and data
1
BIM ifc and data
1
Manage IFC
Properties…
BIM ifc and data
1
Fully automated data
Partially automated data
Manual input / Predefined
118 pieces of IFC data
BIM ifc and data
1
650+ pieces of data
BIM ifc and data
1
650+ pieces of data
Input?
BIM ifc and data
1
Export?
BIM ifc and data
1
650+ pieces of data >
120 pieces of data (112 unique)
Automatic or IFC export (26)
Required for drawings (32)
Schedule (17)
Model (19)
Info only (11)
Repeated (5)
Page 1 of 2
Standard ArchiCAD 16 Template - Internal doors (and doors with connected glazed screens) April 2012
Name of exported data Inputted where? Content Reason Exports to Field appears under
FULLY AUTOMATED DATA
1 Area N/A (calculation from other fields) Value - Structural height x structural width IFC Export Solibri BaseQuantities
2 Area Value N/A (calculation from other fields) As above IFC Export Navisworks IFC Quantity Area
3 BATID N/A Unique identifier IFC Export Solibri Identification
4 Discipline N/A Architecture IFC Export Solibri Identification
5 Distance to Next Floor N/A Distance to next floor from top of architrave IFC Export Solibri Location
6 Element Classification Tags & Categories Door (field in ArchiCAD states 'ArchiCAD Type') IFC Export ? ?
7 Floor N/A Floor name (i.e. GF Ground Floor) Schedule / IFC Export Solibri Location
8 Global Bottom Elevation N/A Location in relation to storey settings IFC Export Solibri Location
9 Global Top Elevation N/A Location in relation to storey settings IFC Export Solibri Location
10 Global X N/A Location in relation to project origin IFC Export Solibri Location
11 Global Y N/A Location in relation to project origin IFC Export Solibri Location
12 Global Z N/A Location in relation to project origin IFC Export Solibri Location
13 Globalid N/A Unique identifier IFC Export Navisworks / Solibri Attributes
14 GUID N/A (as Globalid) As Globalid IFC Export Solibri Identification
15 IFC Operation (ifc_optype) N/A IFC operation (dependent on object selected) IFC Export Navisworks / Solibri AC_Pset_ObjectName
16 IFC Operation (ifc_optypestr) N/A No. of doors (dependent on object selected) IFC Export Navisworks / Solibri AC_Pset_ObjectName
17 Model N/A Name of file IFC Export Solibri Identification
TEMPLATE AUTOMATED (FAVOURITES)
18 2D Detail Level Parameters > Options Scale sensitive Drawing Navisworks / Solibri AC_Pset_ObjectName
19 3D Detail Level Parameters > Options Detailed Model Navisworks / Solibri AC_Pset_ObjectName
20 Accessories Parameters > Parameters for Listing Sidelight (Yes or No) Schedule Navisworks / Solibri AC_Pset_ObjectName
21 Casing Contour Pen Parameters > 2D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
22 Casing Fill Background Pen Inside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
23 Casing Fill Background Pen Outside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
24 Casing Fill Pen Inside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
25 Casing Fill Pen Outside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
26 Casing Fill Type Inside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
27 Casing Fill Type Outside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
28 Connection on the Left Parameters > Ganging False Model Navisworks / Solibri AC_Pset_ObjectName
29 Connection on the Right Parameters > Ganging False Model Navisworks / Solibri AC_Pset_ObjectName
30 Connection on the Top Parameters > Ganging False Model Navisworks / Solibri AC_Pset_ObjectName
31 Curve Resolution Parameters > 3D Representation 12 Drawing Navisworks / Solibri AC_Pset_ObjectName
32 Door Orientation Definition Parameters > Parameters for Listing Automatic Model / Dwg / Schedule Navisworks / Solibri AC_Pset_ObjectName
33 Elevation Parameters > Parameters for Listing Overpanel (yes or no) Schedule Navisworks / Solibri AC_Pset_ObjectName
34 Frame Contour Pen Parameters > 2D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
35 Frame Fill Background Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
36 Frame Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
37 Frame Fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
38 Frame Pen Parameters > 3D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
39 Glass Material Parameters > Materials 24 (Glass-Clear) Model Navisworks / Solibri AC_Pset_ObjectName
40 Glass Pen Parameters > 3D Representation Pen Colour - Template set as Pen XX (0.XX) Model Navisworks / Solibri AC_Pset_ObjectName
41 Glazing Parameters > Parameters for Listing See VP Type For Info Only Navisworks / Solibri AC_Pset_ObjectName
42 Group Type Parameters > Parameters for Listing Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
43 Header Detail Parameters > Parameters for Listing See Detail Drawings For Info Only Navisworks / Solibri AC_Pset_ObjectName
44 HeatTransfer Rate Parameters > Parameters for Listing By Manufacturer For Info Only Navisworks / Solibri AC_Pset_ObjectName
45 Hinges Parameters > Parameters for Listing See Hardware Set For Info Only Navisworks / Solibri AC_Pset_ObjectName
46 Inventory Number Parameters > Parameters for Listing By Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
47 Jamb Detail Parameters > Parameters for Listing See Detail Drawings For Info Only Navisworks / Solibri AC_Pset_ObjectName
48 Layer Wall layer name A-25-M-WallsInternal Drawing Solibri Identification
49 Leaf Contour Pen Parameters > 2D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
50 Leaf Fill Background Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
51 Leaf Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
52 Leaf Fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
53 Leaf Pen Parameters > 3D Representation Pen Colour - Template set as Pen XX (0.XX) Model Navisworks / Solibri AC_Pset_ObjectName
54 Leaf Sidelight ? True or false (depending on object selected) Schedule Navisworks / Solibri AC_Pset_ObjectName
55 Lockset Parameters > Parameters for Listing See Hardware Set For Info Only Navisworks / Solibri AC_Pset_ObjectName
56 Material Fill Pattern No Navisworks / Solibri AC_Pset_ObjectName
57 Object Weight Unit Parameters > Parameters for Listing Weight - set as kg No Navisworks / Solibri AC_Pset_ObjectName
58 Operation Type Parameters > Parameters for Listing Single, door and a half, double etc. Schedule Navisworks / Solibri AC_Pset_ObjectName
59 Plan Symbol Fill Background Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
60 Plan Symbol Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
61 Plan Symbol Fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
62 Position Tags & Categories > Position Interior IFC Export Navisworks ?
63 Production Year Parameters > Parameters for Listing By Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
64 Serial No. Parameters > Parameters for Listing By Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
65 Shadow Parameters > 3D Representation True or false Model Navisworks / Solibri AC_Pset_ObjectName
66 Sidelight Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
67 Sidelight fill Pen Background Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
68 Sidelight fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
69 Sill Detail Parameters > Parameters for Listing See Detail Drawings For Info Only Navisworks / Solibri AC_Pset_ObjectName
70 Structural Function Tags & Categories > Structural Function Non-Load-Bearing Element IFC Export None None
71 Symbol Pen Parameters > 2D Representation Line Type Drawing Navisworks / Solibri AC_Pset_ObjectName
72 Threshold and Sill Line Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
BIM ifc and data
Page 1 of 2
Standard ArchiCAD 16 Template - Internal doors (and doors with connected glazed screens) April 2012
Name of exported data Inputted where? Content Reason Exports to Field appears under
FULLY AUTOMATED DATA
1 Area N/A (calculation from other fields) Value - Structural height x structural width IFC Export Solibri BaseQuantities
2 Area Value N/A (calculation from other fields) As above IFC Export Navisworks IFC Quantity Area
3 BATID N/A Unique identifier IFC Export Solibri Identification
4 Discipline N/A Architecture IFC Export Solibri Identification
5 Distance to Next Floor N/A Distance to next floor from top of architrave IFC Export Solibri Location
6 Element Classification Tags & Categories Door (field in ArchiCAD states 'ArchiCAD Type') IFC Export ? ?
7 Floor N/A Floor name (i.e. GF Ground Floor) Schedule / IFC Export Solibri Location
8 Global Bottom Elevation N/A Location in relation to storey settings IFC Export Solibri Location
9 Global Top Elevation N/A Location in relation to storey settings IFC Export Solibri Location
10 Global X N/A Location in relation to project origin IFC Export Solibri Location
11 Global Y N/A Location in relation to project origin IFC Export Solibri Location
12 Global Z N/A Location in relation to project origin IFC Export Solibri Location
13 Globalid N/A Unique identifier IFC Export Navisworks / Solibri Attributes
14 GUID N/A (as Globalid) As Globalid IFC Export Solibri Identification
15 IFC Operation (ifc_optype) N/A IFC operation (dependent on object selected) IFC Export Navisworks / Solibri AC_Pset_ObjectName
16 IFC Operation (ifc_optypestr) N/A No. of doors (dependent on object selected) IFC Export Navisworks / Solibri AC_Pset_ObjectName
17 Model N/A Name of file IFC Export Solibri Identification
TEMPLATE AUTOMATED (FAVOURITES)
18 2D Detail Level Parameters > Options Scale sensitive Drawing Navisworks / Solibri AC_Pset_ObjectName
19 3D Detail Level Parameters > Options Detailed Model Navisworks / Solibri AC_Pset_ObjectName
20 Accessories Parameters > Parameters for Listing Sidelight (Yes or No) Schedule Navisworks / Solibri AC_Pset_ObjectName
21 Casing Contour Pen Parameters > 2D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
22 Casing Fill Background Pen Inside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
23 Casing Fill Background Pen Outside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
24 Casing Fill Pen Inside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
25 Casing Fill Pen Outside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
26 Casing Fill Type Inside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
27 Casing Fill Type Outside Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
28 Connection on the Left Parameters > Ganging False Model Navisworks / Solibri AC_Pset_ObjectName
29 Connection on the Right Parameters > Ganging False Model Navisworks / Solibri AC_Pset_ObjectName
30 Connection on the Top Parameters > Ganging False Model Navisworks / Solibri AC_Pset_ObjectName
31 Curve Resolution Parameters > 3D Representation 12 Drawing Navisworks / Solibri AC_Pset_ObjectName
32 Door Orientation Definition Parameters > Parameters for Listing Automatic Model / Dwg / Schedule Navisworks / Solibri AC_Pset_ObjectName
33 Elevation Parameters > Parameters for Listing Overpanel (yes or no) Schedule Navisworks / Solibri AC_Pset_ObjectName
34 Frame Contour Pen Parameters > 2D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
35 Frame Fill Background Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
36 Frame Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
37 Frame Fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
38 Frame Pen Parameters > 3D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
39 Glass Material Parameters > Materials 24 (Glass-Clear) Model Navisworks / Solibri AC_Pset_ObjectName
40 Glass Pen Parameters > 3D Representation Pen Colour - Template set as Pen XX (0.XX) Model Navisworks / Solibri AC_Pset_ObjectName
41 Glazing Parameters > Parameters for Listing See VP Type For Info Only Navisworks / Solibri AC_Pset_ObjectName
42 Group Type Parameters > Parameters for Listing Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
43 Header Detail Parameters > Parameters for Listing See Detail Drawings For Info Only Navisworks / Solibri AC_Pset_ObjectName
44 HeatTransfer Rate Parameters > Parameters for Listing By Manufacturer For Info Only Navisworks / Solibri AC_Pset_ObjectName
45 Hinges Parameters > Parameters for Listing See Hardware Set For Info Only Navisworks / Solibri AC_Pset_ObjectName
46 Inventory Number Parameters > Parameters for Listing By Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
47 Jamb Detail Parameters > Parameters for Listing See Detail Drawings For Info Only Navisworks / Solibri AC_Pset_ObjectName
48 Layer Wall layer name A-25-M-WallsInternal Drawing Solibri Identification
49 Leaf Contour Pen Parameters > 2D Representation Pen Colour - Template set as Pen XX (0.XX) Drawing Navisworks / Solibri AC_Pset_ObjectName
50 Leaf Fill Background Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
51 Leaf Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
52 Leaf Fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
53 Leaf Pen Parameters > 3D Representation Pen Colour - Template set as Pen XX (0.XX) Model Navisworks / Solibri AC_Pset_ObjectName
54 Leaf Sidelight ? True or false (depending on object selected) Schedule Navisworks / Solibri AC_Pset_ObjectName
55 Lockset Parameters > Parameters for Listing See Hardware Set For Info Only Navisworks / Solibri AC_Pset_ObjectName
56 Material Fill Pattern No Navisworks / Solibri AC_Pset_ObjectName
57 Object Weight Unit Parameters > Parameters for Listing Weight - set as kg No Navisworks / Solibri AC_Pset_ObjectName
58 Operation Type Parameters > Parameters for Listing Single, door and a half, double etc. Schedule Navisworks / Solibri AC_Pset_ObjectName
59 Plan Symbol Fill Background Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
60 Plan Symbol Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
61 Plan Symbol Fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
62 Position Tags & Categories > Position Interior IFC Export Navisworks ?
63 Production Year Parameters > Parameters for Listing By Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
64 Serial No. Parameters > Parameters for Listing By Others For Info Only Navisworks / Solibri AC_Pset_ObjectName
65 Shadow Parameters > 3D Representation True or false Model Navisworks / Solibri AC_Pset_ObjectName
66 Sidelight Fill Pen Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
67 Sidelight fill Pen Background Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
68 Sidelight fill Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
69 Sill Detail Parameters > Parameters for Listing See Detail Drawings For Info Only Navisworks / Solibri AC_Pset_ObjectName
70 Structural Function Tags & Categories > Structural Function Non-Load-Bearing Element IFC Export None None
71 Symbol Pen Parameters > 2D Representation Line Type Drawing Navisworks / Solibri AC_Pset_ObjectName
72 Threshold and Sill Line Type Parameters > 2D Representation Fill Colour Drawing Navisworks / Solibri AC_Pset_ObjectName
1
Fully automated data (17)
Partially automated data (63)
BIM ifc and data
Page 2 of 2
Name of exported data Inputted where? Content Reason Exports to Field appears under
73 Type Library object name ArchiCAD object name IFC Export Solibri Identification
74 Use Fills Parameters > 2D Representation Off or On Drawing Navisworks / Solibri AC_Pset_ObjectName
75 User Defined 1 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
76 User Defined 2 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
77 User Defined 3 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
78 User Defined 4 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
79 Vision Panel Type Parameters > Parameters for Listing No Vision Panel, Vision Panel or Fully Glazed Schedule Navisworks / Solibri AC_Pset_ObjectName
80 Wall Contour Pen Parameters > 2D Representation Off, Inside, Outside, Both Sides Drawing Navisworks / Solibri AC_Pset_ObjectName
SET BY PROJECT TEMPLATE
81 Building Project Info - Name of project Name of project Dwg / IFC Export Solibri Location
SET BY FILE NAME
82 Model Name of file object exported from Name of file IFC Export Solibri Identification
SET BY EXPORT
83 Geometry IFC translator of file export Boundary Representation IFC Export Solibri Identification
USER DEFINED DATA AT LOD 200 DESIGN STAGE
84 Door Orientation Parameters > Parameters for Listing L or R (dependent on how object placed) Schedule Navisworks / Solibri AC_Pset_ObjectName
85 Exterior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
86 Frame Material Inside Parameters > Materials Material as required Model Solibri AC_Pset_ObjectName
87 Frame Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
88 Height See Wallhole Height Structural opening height Schedule Solibri BaseQuantities
89 Interior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
90 Leaf Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
91 Leaf Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
92 LengthValue (Name - Height) See Wallhole Height Structural opening height Schedule Navisworks IFCQuantityLength
93 LengthValue (Name - Width) See Wallhole Width Structural opening width Schedule Navisworks IFCQuantityLength
94 Mullion Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
95 Mullion Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
96 OverallHeight See Wallhole Height Structural opening height Schedule Navisworks IFC
97 OverallWidth See Wallhole Width Structural opening width Schedule Navisworks IFC
98 Renovation Status Tags & Categories > Renovation Status Existing, Demolished or New Model / Drawing Navisworks / Solibri Pset_RenovationAndPhasing
99 Wallhole Height Parameters > Door Sizes Structural opening height Schedule Navisworks / Solibri AC_Pset_ObjectName
100 Wallhole Width Parameters > Door Sizes Structural opening width Schedule Navisworks / Solibri AC_Pset_ObjectName
101 Width See Wallhole Width Structural opening width Schedule Solibri BaseQuantities
USER DEFINED DATA AT LOD 300 CONSTRUCTION STAGE
102 Area Automatic from other fields Height x width (including architraves) IFC export only Solibri Quantities
103 Acoustic Rating Parameters > Parameters for Listing Acoustic rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
104 Comments Parameters > Parameters for Listing As required Schedule Navisworks / Solibri AC_Pset_ObjectName
105 Door Closer Parameters > Parameters for Listing Yes or No Schedule Navisworks / Solibri AC_Pset_ObjectName
106 Elevation Type Parameters > Parameters for Listing Elevation Type Number (i.e Type 1) Schedule Navisworks / Solibri AC_Pset_ObjectName
107 Finish Parameters > Parameters for Listing Door finish Schedule Navisworks / Solibri AC_Pset_ObjectName
108 Fire Rating Parameters > Parameters for Listing Fire rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
109 Frame Length Automatic from other fields Height x2 plus width (including architraves) IFC export only Solibri Quantities
110 Frame Type Parameters > Parameters for Listing Frame material construction Schedule Navisworks / Solibri AC_Pset_ObjectName
111 Hardware Set Parameters > Parameters for Listing Hardware door set from sub-contractor Schedule Navisworks / Solibri AC_Pset_ObjectName
112 Height Automatic from other fields Height of door opening plus architraves IFC export only Solibri Quantities
113 Hold Open Device Parameters > Parameters for Listing True or false Schedule Navisworks / Solibri AC_Pset_ObjectName
114 Name Tags & Categories > ID Door number reference Schedule Solibri Identification
115 Name As above As above Schedule Navisworks Properties > Item
116 Name As above As above Schedule Navisworks IFC
117 NBS Clause Parameters > Parameters for Listing NBS clause reference Schedule Navisworks / Solibri AC_Pset_ObjectName
118 Top Elevation Automatic from other fields Height to top of object (i.e. architrave) IFC export only Solibri Location
119 Uniform Frame Width Parameters > Door Frame True or false Model / Drawing Navisworks / Solibri AC_Pset_ObjectName
120 Width Automatic from other fields Width of door opening plus architraves IFC export only Solibri Quantities
Notes
Any data not listed on these pages should be disregarded and not used for any purpose.
Specifically Unit Dimensions, Egress Dimensions and Leaf Dimensions should not be used as these values are incorrectly generated from the objects.
1
Set by template (1)
Set by file name (1)
Set by export (1)
Set at design stage (18)
includes 6 duplicates
Set at construction stage (19)
includes 2 duplicates and 5
generated from other data
BIM ifc and data
Page 2 of 2
Name of exported data Inputted where? Content Reason Exports to Field appears under
73 Type Library object name ArchiCAD object name IFC Export Solibri Identification
74 Use Fills Parameters > 2D Representation Off or On Drawing Navisworks / Solibri AC_Pset_ObjectName
75 User Defined 1 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
76 User Defined 2 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
77 User Defined 3 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
78 User Defined 4 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
79 Vision Panel Type Parameters > Parameters for Listing No Vision Panel, Vision Panel or Fully Glazed Schedule Navisworks / Solibri AC_Pset_ObjectName
80 Wall Contour Pen Parameters > 2D Representation Off, Inside, Outside, Both Sides Drawing Navisworks / Solibri AC_Pset_ObjectName
SET BY PROJECT TEMPLATE
81 Building Project Info - Name of project Name of project Dwg / IFC Export Solibri Location
SET BY FILE NAME
82 Model Name of file object exported from Name of file IFC Export Solibri Identification
SET BY EXPORT
83 Geometry IFC translator of file export Boundary Representation IFC Export Solibri Identification
USER DEFINED DATA AT LOD 200 DESIGN STAGE
84 Door Orientation Parameters > Parameters for Listing L or R (dependent on how object placed) Schedule Navisworks / Solibri AC_Pset_ObjectName
85 Exterior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
86 Frame Material Inside Parameters > Materials Material as required Model Solibri AC_Pset_ObjectName
87 Frame Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
88 Height See Wallhole Height Structural opening height Schedule Solibri BaseQuantities
89 Interior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
90 Leaf Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
91 Leaf Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
92 LengthValue (Name - Height) See Wallhole Height Structural opening height Schedule Navisworks IFCQuantityLength
93 LengthValue (Name - Width) See Wallhole Width Structural opening width Schedule Navisworks IFCQuantityLength
94 Mullion Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
95 Mullion Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
96 OverallHeight See Wallhole Height Structural opening height Schedule Navisworks IFC
97 OverallWidth See Wallhole Width Structural opening width Schedule Navisworks IFC
98 Renovation Status Tags & Categories > Renovation Status Existing, Demolished or New Model / Drawing Navisworks / Solibri Pset_RenovationAndPhasing
99 Wallhole Height Parameters > Door Sizes Structural opening height Schedule Navisworks / Solibri AC_Pset_ObjectName
100 Wallhole Width Parameters > Door Sizes Structural opening width Schedule Navisworks / Solibri AC_Pset_ObjectName
101 Width See Wallhole Width Structural opening width Schedule Solibri BaseQuantities
USER DEFINED DATA AT LOD 300 CONSTRUCTION STAGE
102 Area Automatic from other fields Height x width (including architraves) IFC export only Solibri Quantities
103 Acoustic Rating Parameters > Parameters for Listing Acoustic rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
104 Comments Parameters > Parameters for Listing As required Schedule Navisworks / Solibri AC_Pset_ObjectName
105 Door Closer Parameters > Parameters for Listing Yes or No Schedule Navisworks / Solibri AC_Pset_ObjectName
106 Elevation Type Parameters > Parameters for Listing Elevation Type Number (i.e Type 1) Schedule Navisworks / Solibri AC_Pset_ObjectName
107 Finish Parameters > Parameters for Listing Door finish Schedule Navisworks / Solibri AC_Pset_ObjectName
108 Fire Rating Parameters > Parameters for Listing Fire rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
109 Frame Length Automatic from other fields Height x2 plus width (including architraves) IFC export only Solibri Quantities
110 Frame Type Parameters > Parameters for Listing Frame material construction Schedule Navisworks / Solibri AC_Pset_ObjectName
111 Hardware Set Parameters > Parameters for Listing Hardware door set from sub-contractor Schedule Navisworks / Solibri AC_Pset_ObjectName
112 Height Automatic from other fields Height of door opening plus architraves IFC export only Solibri Quantities
113 Hold Open Device Parameters > Parameters for Listing True or false Schedule Navisworks / Solibri AC_Pset_ObjectName
114 Name Tags & Categories > ID Door number reference Schedule Solibri Identification
115 Name As above As above Schedule Navisworks Properties > Item
116 Name As above As above Schedule Navisworks IFC
117 NBS Clause Parameters > Parameters for Listing NBS clause reference Schedule Navisworks / Solibri AC_Pset_ObjectName
118 Top Elevation Automatic from other fields Height to top of object (i.e. architrave) IFC export only Solibri Location
119 Uniform Frame Width Parameters > Door Frame True or false Model / Drawing Navisworks / Solibri AC_Pset_ObjectName
120 Width Automatic from other fields Width of door opening plus architraves IFC export only Solibri Quantities
Notes
Any data not listed on these pages should be disregarded and not used for any purpose.
Specifically Unit Dimensions, Egress Dimensions and Leaf Dimensions should not be used as these values are incorrectly generated from the objects.
1
Why are you creating the data?
Who is it for?
Will it add value to you?
Will it add value for others?
BIM ifc and data
Page 2 of 2
Name of exported data Inputted where? Content Reason Exports to Field appears under
73 Type Library object name ArchiCAD object name IFC Export Solibri Identification
74 Use Fills Parameters > 2D Representation Off or On Drawing Navisworks / Solibri AC_Pset_ObjectName
75 User Defined 1 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
76 User Defined 2 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
77 User Defined 3 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
78 User Defined 4 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
79 Vision Panel Type Parameters > Parameters for Listing No Vision Panel, Vision Panel or Fully Glazed Schedule Navisworks / Solibri AC_Pset_ObjectName
80 Wall Contour Pen Parameters > 2D Representation Off, Inside, Outside, Both Sides Drawing Navisworks / Solibri AC_Pset_ObjectName
SET BY PROJECT TEMPLATE
81 Building Project Info - Name of project Name of project Dwg / IFC Export Solibri Location
SET BY FILE NAME
82 Model Name of file object exported from Name of file IFC Export Solibri Identification
SET BY EXPORT
83 Geometry IFC translator of file export Boundary Representation IFC Export Solibri Identification
USER DEFINED DATA AT LOD 200 DESIGN STAGE
84 Door Orientation Parameters > Parameters for Listing L or R (dependent on how object placed) Schedule Navisworks / Solibri AC_Pset_ObjectName
85 Exterior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
86 Frame Material Inside Parameters > Materials Material as required Model Solibri AC_Pset_ObjectName
87 Frame Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
88 Height See Wallhole Height Structural opening height Schedule Solibri BaseQuantities
89 Interior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
90 Leaf Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
91 Leaf Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
92 LengthValue (Name - Height) See Wallhole Height Structural opening height Schedule Navisworks IFCQuantityLength
93 LengthValue (Name - Width) See Wallhole Width Structural opening width Schedule Navisworks IFCQuantityLength
94 Mullion Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
95 Mullion Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
96 OverallHeight See Wallhole Height Structural opening height Schedule Navisworks IFC
97 OverallWidth See Wallhole Width Structural opening width Schedule Navisworks IFC
98 Renovation Status Tags & Categories > Renovation Status Existing, Demolished or New Model / Drawing Navisworks / Solibri Pset_RenovationAndPhasing
99 Wallhole Height Parameters > Door Sizes Structural opening height Schedule Navisworks / Solibri AC_Pset_ObjectName
100 Wallhole Width Parameters > Door Sizes Structural opening width Schedule Navisworks / Solibri AC_Pset_ObjectName
101 Width See Wallhole Width Structural opening width Schedule Solibri BaseQuantities
USER DEFINED DATA AT LOD 300 CONSTRUCTION STAGE
102 Area Automatic from other fields Height x width (including architraves) IFC export only Solibri Quantities
103 Acoustic Rating Parameters > Parameters for Listing Acoustic rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
104 Comments Parameters > Parameters for Listing As required Schedule Navisworks / Solibri AC_Pset_ObjectName
105 Door Closer Parameters > Parameters for Listing Yes or No Schedule Navisworks / Solibri AC_Pset_ObjectName
106 Elevation Type Parameters > Parameters for Listing Elevation Type Number (i.e Type 1) Schedule Navisworks / Solibri AC_Pset_ObjectName
107 Finish Parameters > Parameters for Listing Door finish Schedule Navisworks / Solibri AC_Pset_ObjectName
108 Fire Rating Parameters > Parameters for Listing Fire rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
109 Frame Length Automatic from other fields Height x2 plus width (including architraves) IFC export only Solibri Quantities
110 Frame Type Parameters > Parameters for Listing Frame material construction Schedule Navisworks / Solibri AC_Pset_ObjectName
111 Hardware Set Parameters > Parameters for Listing Hardware door set from sub-contractor Schedule Navisworks / Solibri AC_Pset_ObjectName
112 Height Automatic from other fields Height of door opening plus architraves IFC export only Solibri Quantities
113 Hold Open Device Parameters > Parameters for Listing True or false Schedule Navisworks / Solibri AC_Pset_ObjectName
114 Name Tags & Categories > ID Door number reference Schedule Solibri Identification
115 Name As above As above Schedule Navisworks Properties > Item
116 Name As above As above Schedule Navisworks IFC
117 NBS Clause Parameters > Parameters for Listing NBS clause reference Schedule Navisworks / Solibri AC_Pset_ObjectName
118 Top Elevation Automatic from other fields Height to top of object (i.e. architrave) IFC export only Solibri Location
119 Uniform Frame Width Parameters > Door Frame True or false Model / Drawing Navisworks / Solibri AC_Pset_ObjectName
120 Width Automatic from other fields Width of door opening plus architraves IFC export only Solibri Quantities
Notes
Any data not listed on these pages should be disregarded and not used for any purpose.
Specifically Unit Dimensions, Egress Dimensions and Leaf Dimensions should not be used as these values are incorrectly generated from the objects.
1
When do you need to create the
data?
BIM ifc and data
Page 2 of 2
Name of exported data Inputted where? Content Reason Exports to Field appears under
73 Type Library object name ArchiCAD object name IFC Export Solibri Identification
74 Use Fills Parameters > 2D Representation Off or On Drawing Navisworks / Solibri AC_Pset_ObjectName
75 User Defined 1 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
76 User Defined 2 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
77 User Defined 3 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
78 User Defined 4 Parameters > Parameters for Listing N/A Spare - if required Navisworks / Solibri AC_Pset_ObjectName
79 Vision Panel Type Parameters > Parameters for Listing No Vision Panel, Vision Panel or Fully Glazed Schedule Navisworks / Solibri AC_Pset_ObjectName
80 Wall Contour Pen Parameters > 2D Representation Off, Inside, Outside, Both Sides Drawing Navisworks / Solibri AC_Pset_ObjectName
SET BY PROJECT TEMPLATE
81 Building Project Info - Name of project Name of project Dwg / IFC Export Solibri Location
SET BY FILE NAME
82 Model Name of file object exported from Name of file IFC Export Solibri Identification
SET BY EXPORT
83 Geometry IFC translator of file export Boundary Representation IFC Export Solibri Identification
USER DEFINED DATA AT LOD 200 DESIGN STAGE
84 Door Orientation Parameters > Parameters for Listing L or R (dependent on how object placed) Schedule Navisworks / Solibri AC_Pset_ObjectName
85 Exterior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
86 Frame Material Inside Parameters > Materials Material as required Model Solibri AC_Pset_ObjectName
87 Frame Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
88 Height See Wallhole Height Structural opening height Schedule Solibri BaseQuantities
89 Interior Casing Material Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
90 Leaf Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
91 Leaf Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
92 LengthValue (Name - Height) See Wallhole Height Structural opening height Schedule Navisworks IFCQuantityLength
93 LengthValue (Name - Width) See Wallhole Width Structural opening width Schedule Navisworks IFCQuantityLength
94 Mullion Material Inside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
95 Mullion Material Outside Parameters > Materials Material as required Model Navisworks / Solibri AC_Pset_ObjectName
96 OverallHeight See Wallhole Height Structural opening height Schedule Navisworks IFC
97 OverallWidth See Wallhole Width Structural opening width Schedule Navisworks IFC
98 Renovation Status Tags & Categories > Renovation Status Existing, Demolished or New Model / Drawing Navisworks / Solibri Pset_RenovationAndPhasing
99 Wallhole Height Parameters > Door Sizes Structural opening height Schedule Navisworks / Solibri AC_Pset_ObjectName
100 Wallhole Width Parameters > Door Sizes Structural opening width Schedule Navisworks / Solibri AC_Pset_ObjectName
101 Width See Wallhole Width Structural opening width Schedule Solibri BaseQuantities
USER DEFINED DATA AT LOD 300 CONSTRUCTION STAGE
102 Area Automatic from other fields Height x width (including architraves) IFC export only Solibri Quantities
103 Acoustic Rating Parameters > Parameters for Listing Acoustic rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
104 Comments Parameters > Parameters for Listing As required Schedule Navisworks / Solibri AC_Pset_ObjectName
105 Door Closer Parameters > Parameters for Listing Yes or No Schedule Navisworks / Solibri AC_Pset_ObjectName
106 Elevation Type Parameters > Parameters for Listing Elevation Type Number (i.e Type 1) Schedule Navisworks / Solibri AC_Pset_ObjectName
107 Finish Parameters > Parameters for Listing Door finish Schedule Navisworks / Solibri AC_Pset_ObjectName
108 Fire Rating Parameters > Parameters for Listing Fire rating as required Schedule Navisworks / Solibri AC_Pset_ObjectName
109 Frame Length Automatic from other fields Height x2 plus width (including architraves) IFC export only Solibri Quantities
110 Frame Type Parameters > Parameters for Listing Frame material construction Schedule Navisworks / Solibri AC_Pset_ObjectName
111 Hardware Set Parameters > Parameters for Listing Hardware door set from sub-contractor Schedule Navisworks / Solibri AC_Pset_ObjectName
112 Height Automatic from other fields Height of door opening plus architraves IFC export only Solibri Quantities
113 Hold Open Device Parameters > Parameters for Listing True or false Schedule Navisworks / Solibri AC_Pset_ObjectName
114 Name Tags & Categories > ID Door number reference Schedule Solibri Identification
115 Name As above As above Schedule Navisworks Properties > Item
116 Name As above As above Schedule Navisworks IFC
117 NBS Clause Parameters > Parameters for Listing NBS clause reference Schedule Navisworks / Solibri AC_Pset_ObjectName
118 Top Elevation Automatic from other fields Height to top of object (i.e. architrave) IFC export only Solibri Location
119 Uniform Frame Width Parameters > Door Frame True or false Model / Drawing Navisworks / Solibri AC_Pset_ObjectName
120 Width Automatic from other fields Width of door opening plus architraves IFC export only Solibri Quantities
Notes
Any data not listed on these pages should be disregarded and not used for any purpose.
Specifically Unit Dimensions, Egress Dimensions and Leaf Dimensions should not be used as these values are incorrectly generated from the objects.
1
BIM ifc and data
When do you need to create the
data?
One contractor –
+ Uniclass category
Version
Product Alias
Zone
Role
Other standards for an Open BIM / collaboration
1 Standard Document Category Number Index June 2011
Cat. No. Document name Cat. No. Document name
SK SKETCHES G4 FITTINGS / FURNITURE / EQUIPMENT (FFE)
SK 001-999 Sketches (to include information upto Stage C/D and other sketches) G41 001-099 Circulation FFE (inc. all internal signage)
G42 001-099 Rest and work FFE (inc. detailed room layouts)
G0 IMAGES, GENERAL ARRANGEMENT AND STRATEGY G43 001-099 Culinary FFE (inc. catering equipment schedule)
G44 001-099 Sanitary and hygiene FFE (inc. schedules and detailed sanitary layouts)
G00 001-999 Presentation images and photographs G45 001-099 Cleaning and maintenance FFE
G01 001-999 Existing site plans (inc. site location, topographical and OS plans) G46 001-099 Storage and screening FFE
G02 001-999 Existing floor plans G47 001-099 Works of art and soft furnishings
G03 001-999 Existing elevations G48 001-099 Special activity FFE
G04 001-499 Existing building sections OTHER FFE
500-999 Existing site sections G49 001-499 Other FFE
G05 001-999 Other existing information 500-999 FFE Schedules
G06 001-499 Proposed site plans
500-799 Proposed site phasing plans G5 SERVICES: COMPLETE ELEMENTS
800-999 Site zoning plans
G07 001-299 Proposed GA plans (inc. roof plan) G50 001-099 Water supply
300-499 Proposed building setting out plans G51 001-099 Gas and liquid fuel supply
500-699 Fire strategy plans (and details) G52 001-099 Heating, ventilation and air conditioning
700-899 Building phasing plans G53 001-099 Electric power
900-999 Building zoning plans G54 001-099 Lighting
G08 001-999 Proposed GA elevations G55 001-099 Communications
G09 001-999 Proposed GA sections (inc. proposed site sections) G56 001-099 Transport systems (inc. lifts, hoists, platforms, escalators, cradles etc.)
G57 001-099 Fire, security and protection
G1 SITE PREPARATION DISPOSAL SYSTEMS
G58 001-399 Drainage plans and details (inc. foul, surface, rainwater and sewage)
SITE CLEARANCE 400-699 Refuse disposal
G11 001-399 Demolition plans 700-999 Special activity
400-699 Post demolition plans G59 001-099 Other services elements
700-999 New construction overlayed over demolition plans
SITE PREPARATION AND GROUND CONTOURING G6 SERVICES: PARTS OF ELEMENTS
G12 001-299 Site preparation
300-499 Proposed site levels / site setting out plans G61 001-099 Source (energy generation / storage / conversion)
500-699 Site limitations (inc. contractors compound and access drawings etc.) G62 001-099 Non-energy treatment / storage
700-999 Sign board G63 001-099 Distribution
G13 001-999 Stabilisation G64 001-099 Terminals
G65 001-099 Package units
G2 FABRIC: COMPLETE ELEMENTS G66 001-099 Monitoring and control
G69 001-099 Other parts of service elements
G21 001-499 Foundations
G22 001-999 Floors (inc. raised access, floor hatches, trapdoors etc.) G7 EXTERNAL / SITE WORKS
G23 001-999 Stairs and ramps
G24 001-999 Roof details (inc. rooflights) G71 001-999 Surface treatment
WALLS G72 001-999 Enclosure / division (inc. external balustrades, barriers and handrails)
G25 001-299 Wall section details (inc. edge sections, partition details, movement etc.) G73 001-299 External works details
300-499 Wall plan details (inc. column to wall, brick specials, DPC/DPM etc) 300-499 Ancillary buildings (inc. sub-stations, bin stores etc.)
500-699 Internal wall type plans 500-699 Shelters and canopies (independent from buildings - see also G31)
700-999 Retaining walls 700-999 Special purpose works
G26 001-999 Building frame FITTINGS / FURNITURE / EQUIPMENT (EXTERNAL)
G74 001-499 External FFE
G3 FABRIC: PARTS OF ELEMENTS 500-999 External signage
G75 001-999 Mains supply
CARCASS / STRUCTURE / FABRIC G76 001-999 External distributed services
G31 001-499 External elements (inc. canopies connected to building, shading devices etc.) G77 001-999 Site / underground drainage
500-999 External finishes (inc. external finishes boards)
OPENINGS G8 DOCUMENTS AND REPORTS
G32 001-199 Windows and curtain walling (inc. schedule, elevations and details )
200-299 Glazed screens (inc. schedule, elevations and details ) G81 001-999 Specification (inc. outline and NBS)
300-399 External doors (inc. schedule, elevations and details ) G82 001-999 Room data schedules (or room data sheets)
400-499 Other external openings G83 001-999 Key data documents (inc. schedule of accommodation)
500-599 Internal doors (inc. schedule, elevations and details ) REPORTS
700-799 Room dividers G84 001-399 Stage reports
800-899 Internal hatch openings, serveries etc. 400-799 Site inspection reports
900-999 Other internal openings 800-999 Other reports
INTERNAL FINISHES G85 001-999 Calculations (inc. occupancies, stair calcs, sanitary etc.)
G33 001-499 Internal finishes plans and details (inc. schedules and finishes boards) G86 001-999 CDM, access, maintenance and usage reports
500-999 Reflected ceiling plans and details (inc. co-ordinated layouts) G87 001-999 Building regulations notes
OTHER INTERNAL FINISHES G88 001-999 Powerpoints and other presentations
G34 001-499 Internal Balustrade, Barriers and Handrails G88 001-999 Other elements and other documentation
500-999 Other internal finishes
G9 MODELS AND MODEL DATA
Bond Bryan's numbering system is based on Uniclass Table G.
Categories SK, G0, G8 and G9 have been created to supplement the table for completeness. G91 001-499 Building information models and data (inc. facilities management data)
For more information on Uniclass visit www.cpic.org.uk/publications/uniclass-listing.cfm 500-999 BIM explorer models
Standard Building Information Model Layers June 2011
F SPACES G5 SERVICES: COMPLETE ELEMENTS Z DRAFTING continued
F91 A-F91-D_area site gross services (architect) Z34 images
A-F91-D_area gross external A-G52-M_services mechanical A-Z34-P_images
A-F91-D_area site breakdown A-G53-M_services electrical
A-F92-D_area gross internal A-G54-M_services lighting Z41 setting out
A-G56-M_services lifts A-Z41-D_setout building
G0 STRATEGY A-Z41-D_setout site
G58 disposal systems
G07 A-G07-M_strategy fire A-G58-M_drainage foul Z42 gridlines
A-G07-M_strategy phasing A-G58-M_drainage rainwater A-Z42-P_structural grid
A-G07-M_strategy zones A-G58-M_drainage surface
Z46 zones
G1 SITE PREPARATION G6 SERVICES: PARTS OF ELEMENTS A-Z46-P_boundary site blue
A-Z46-P_boundary site red
G12 A-G12-M_site terrain hard G7 EXTERNAL / SITE WORKS A-Z46-P_zones
A-G12-M_site terrain soft A-Z46-P_zone atria
G73 externals A-Z46-P_zone boundaries
G2 FABRIC: COMPLETE ELEMENTS A-G73-M_external context
A-G73-M_external details Z51 levels
G21 foundations A-G74-M_external ffe A-Z51-D_levels
A-G21-M_foundations A-G74-M_external structures
Z53 details
G22 floors Z DRAFTING A-Z53-P_detail markers
A-G22-M_floors and slabs A-Z53-P_detail
A-G22-M_floors raised Z11 layouts
A-Z11-P_layout all Z55 falls and joints
G23 stairs and ramps A-Z11-P_layout kuwait A-Z55-P_fall indicators
A-G23-M_stairs and ramps A-Z11-P_layout sheffield A-Z56-P_joint lines
A-Z11-P_layout westerham
G24 roof views
A-G24-M_roof Z13 revisions A-Z61-P_section lines
A-G24-M_roof detail A-Z13-P_revision clouds A-Z62-P_elevation lines
G25 walls Z22 annotation, legends and labels presentation
A-G25-M_walls external A-Z22-P_north point A-Z71-P_pres vehicles
A-G25-M_walls internal A-Z22-T_annotation detailed A-Z72-P_pres people
A-G25-M_walls retaining A-Z22-T_annotation general A-Z73-P_pres trees and planting
A-Z22-T_annotation ceilings
G26 structure (architect) A-Z22-T_annotation doors internal Z81 construction line
A-G26-M_structure beams A-Z22-T_annotation doors external A-Z81-P_construction lines
A-G26-M_structure bracing A-Z22-T_annotation finishes
A-G26-M_structure columns A-Z22-T_annotation ffe Z83 external reference
A-Z22-T_annotation glazed screens A-Z83-P_external reference
G3 FABRIC: PARTS OF ELEMENTS A-Z22-T_annotation walls internal
A-Z22-T_annotation walls external Z84 miscellaneous
G31 external elements A-Z22-T_annotation windows and cw A-Z84-P_ivf
A-G31-M_solar shading A-Z22-T_annotation site A-Z84-P_rough
A-Z22-T_annotation stairs and ramps A-Z84-P_solid element operators
G32 openings A-Z22-T_annotation structure beams
A-G32-M_openings doors external A-Z22-T_annotation structure columns
A-G32-M_openings doors internal OTHER CONSULTANTS INFORMATION
A-G32-M_openings glazed screens Z23 dimensions
A-G32-M_openings room dividers A-Z23-D_dimensions internal land surveyor (topographical)
A-G32-M_openings windows and cw A-Z23-D_dimensions external G-G5-P_survey topo services
A-Z23-D_dimensions grid G-G12-P_survey topo contours
G33 internal finishes G-G72-P_survey topo fences
A-G33-M_finishes floor Z25 general masking G-G72-P_survey topo walls
A-G33-M_finishes ceilings A-Z25-P_symbol disabled G-G73-P_survey topo buildings
G-G73-P_survey topo misc
G34 other internal finishes Z31 external references G-G73-P_survey topo roads
A-G34-M_balustrade A-Z31-P_hotlinkmaster building model G-Z11-T_survey topo title
A-Z31-P_hotlinkmaster grid G-Z22-T_survey topo annotation
G4 FITTINGS / FURNITURE / EQUIPMENT (FFE) A-Z31-P_hotlinkmaster ivf G-Z42-P_survey topo grid
A-Z31-P_hotlinkmaster os G-Z44-P_survey topo station
G42 ffe A-Z31-P_hotlinkmaster sanitary G-Z51-D_survey topo levels
A-G42-M_ffe fixed A-Z31-P_hotlinkmaster services G-Z73-P_survey topo trees and planting
A-G42-M_ffe loose A-Z31-P_hotlinkmaster site existing
A-G43-M_ffe culinary A-Z31-P_hotlinkmaster site proposed os plan
A-G44-M_ffe sanitary A-Z31-P_hotlinkmaster stairs V-Z22-T_survey os annotation
A-G45-M_ffe maintenance A-Z31-P_hotlinkmaster structural V-Z42-P_survey os grid
A-G49-M_ffe other A-Z31-P_hotlinkmaster topo V-Z44-P_survey os general
Bond Bryan's layering system is fully compatible with BS1192:2007. Classification is based on Uniclass Tables F, G and Z.
Category G07 and Z84 has been created to supplement the table for completeness. BS 1192:2007 identifies a number of spare categories - Category V has therefore been allocated to OS plan information.
For more information on BS1192:2007 see the British Standards Institution website and for Uniclass visit www.cpic.org.uk/publications/uniclass-listing.cfm
Standard Building Information Model Additional Layers June 2011
- The tables below set out the format for setting up additional layers within a specific project.
- All additional layers should conform to these tables.
- No 'rogue' layers should be contained within the project.
- Information from previous projects should not be copied into project files in order to prevent 'rogue' layers.
FORMAT
Layering format is to BS1192:2007 (as described in table C.1)
Field name Role - Classification - Presentation _ Description
Number of characters 1 then hypen 2-5 then hypen 1 Underscore then unlimited
ROLE CLASSIFICATION continued CLASSIFICATION continued
Role as defined in BS1192:2007 10.2 Fittings / furniture / equipment (FFE) Insertions
G41 Circulation FFE Z31 External references
A- Architect G42 Rest, work FFE Z32 Blocks and cells
B- Building surveyor G43 Culinary FFE Z33 Tables and schedules
C- Civil engineer G44 Sanitary, hygiene FFE Z34 Images
D- Drainage, Highways engineer G45 Cleaning, maintenance FFE
E- Electrical engineer G46 Storage, screening FFE Setting out
F- Facilities manager G47 Works of art, soft furnishings Z41 Points
G- Geopgraphical and land surveyor G48 Special activity FFE Z42 Gridlines
H- Heating and venitlation designer G49 Other FFE Z43 Centrelines
I- Interior designer Z44 Survey control points
J- Spare Services: complete elements Z45 Alignments and super elevations
K- Client G50 Water supply Z46 Zones and boundaries
L- Landscape architect G51 Gas and liquid fuel supply
M- Mechanical engineer G52 Heating, ventilation and air conditioning Drawings symbols
N- Spare G53 Electric power Z51 Levels
P- Public health engineer G54 Lighting Z52 Markers
Q- Quantity surveyor G55 Communications Z53 Detail call ups
R- Spare G56 Transport systems Z54 Match lines
S- Strucutral engineer G57 Fire, security and protection Z55 Fall indicators
T- Town and country planner G58 Disposal systems Z56 Joint lines
U- Spare G59 Other services elements
V- OS plan data Views
W- Contractor Services: parts of elements Z61 General sections
X- Sub-contractor G61 Source (energy generation / storage / conversion) Z62 General elevations
Y- Specialist designer G62 Non-energy treatment / storage
Z- General (non-disciplinary) G63 Distribution Presentation
G64 Terminals Z71 Vehicles
CLASSIFICATION G65 Package units Z72 People
G66 Monitoring and control Z73 Trees and planting
Classification is in line with BS1192:2007 and G67 Spare Z74 Hatching
BS ISO 12006-2:2001 G68 Spare Z75 Area fill
G69 Other parts of services elements Z76 Pattern
From Uniclass Table F:
Site preparation External / site works Readme and non plotting
F91- Building space analysed according to ISO 9836:1992 G71 Surface treatment Z81 Construction lines
F92- Building space analysed according to RICS and ISVA code G72 Enclosure / division Z82 Readme
G73 Special purpose works Z83 External reference information
G74 Fittings / furniture / equipment Z84 Miscellaneous / not identified elsewhere
From Uniclass Table G: G75 Mains supply
Site preparation G76- External distributed services PRESENTATION
G11- Site clearance G77- Site / underground drainage
G12- Site preparation and ground contouring Presentation as defined in BS1192:2007 12.2
G13- Stabilisation Title sheet
Z11- Title annotation D Dimensioning
Fabric: complete elements Z12- Status stamps H Hatching and shading
G21- Foundations Z13- Revisions M Model related elements
G22- Floors Z14- Hold clouds and notation P Plot / paper related elements
G23- Stairs T Text
G24- Roofs
G25- Walls From Uniclass Table Z: DESCRIPTION
G26- Frame / isolated structural members Drawing Frame
Z21- Drawing viewports Description in line with Uniclass
Fabric: parts of elements Z22- Annotation
G31- Carcass / structure / fabric Z23- Dimensions _layer name
G30- Openings Z24- Hatching
G31- Internal finishes Z25- General masking insert underscore and then appropriate name
G32- Other parts of fabric elements Z26- General redlining related to category
Bond Bryan's layering system is fully compatible with BS1192:2007. Classification is based on Uniclass Tables F, G and Z.
Category Z84 has been created to supplement the table for completeness.
For more information on BS1192:2007 see the British Standards Institution website and for Uniclass visit www.cpic.org.uk/publications/uniclass-listing.cfm
Document / model numbering Model layers Additional layers
Admin filing index Graphic filing index Other standards Working as a team
BIM Standards to
BS 1192:2007
and
BS ISO 12006-2:2001
in the form of Uniclass
BIM collaboration standards
The client
1
volume model
space model
scheme model
element model
construction model
fabrication model
facilities management data
design
team
contractor /
sub-contractor
client
level
of
detail
and
value
3D
+
4D
+
5D
6D
construction
project
post hand
over
de
sig
n m
od
el
BIM model development
100
200
300
400
500
1
3 clear deliverables at end of a project –
PDF documentation
Models in their native format
Data in the form of COBie
DWGs
Models in a neutral format
BIM level 2 bim: processes
Introduction
Alarm diagrams
Architectural Product Schedules
Area calculations
Assignment of components to systems
Change orders
Classified areas, vaults etc.
Components identified by barcodes
Construction submittal document register *
Connections between components *
Contact Details
Contingency plans
Contract documents
Cost estimates
Design Document Register
Disaster recovery plans
Electrical Product Schedules
Electronic 3D model
Engineering calculations
Facility Naming
FF&E inventory
Floor Plans
Hazardous materials
Indicative sizes for spaces *
Inspection records
Installed product data
Invoices
Legal description
Maintenance records
Mechanical Product Schedules
Model and serial numbers of all installed products / equipment
BIM facilities management
Network diagrams
Operation and maintenance documents
Personnel lists
Plumbing Product Schedules
Procurement documents
Progress photographs
Purchase requests
Seating plans
Simulations
Space and Room Data Sheets
Space Layouts
Space Zoning
Space Functions
Specifications
Sub-contractor drawings
Supporting documentation for litigation
Volume calculations
Warranty, parts and handover documents
Zoning and space allocations
Summary
1
BIM summary
Architect Consultant Contractor Client
2
2.1 2.2 2.3 2.4
2016
Traditional
Deliverables
+
Model
+
Intelligent
Data Outputs
Intelligent
3D
+
Data
Analysis
Intelligent
3D
+
Data
Data
COBie
Sharing Knowledge
1
BIM knowledge
BIM knowledge
BIM knowledge
www.bim.bondbryan.com
@bondbryan