Lufkin reverse reduction marine gears for drop-in applications

Reliability

• New generation, critical service, high performance marine gear

• The most robust gears in the industry

• Reverse gear and clutches rated for full power and speed

• Rating

• Gearing exceeds ABS requirements for unrestricted continuous service

• Up-rated gearing to allow repower with new generation engines

• Interchangeability

• Fits the foundation hole pattern of the CAT 7271, 7261, or 7251 units, LST, Falk 12, 14, and 21 MB gear units, as well as Falk MR Series

• No structural changes are required

• Fits the existing tail shaft coupling

• Can accommodate the existing input coupling or a more modern coupling

• Can be modified to fit any application

• Available to meet ice class

• Exceeds ISO-6336 and meets AGMA 6032B-13 gear rating standards

Bearings

• Spherical and tapered roller bearings exceed 20,000 hours L10 life, unadjusted

• Thrust bearings are sized for 100,000 hours minimum life based on full engine power rating, propeller thrust capacity, and speed

• Radial split sleeve, babbitt-lined, steel backed journal bearings, and flat-faced, or KTB type (tilt pad) thrust bearings are available upon request

Clutches

• Hydraulically actuated, oil cooled

• Conservatively selected for low heat dissipation characteristics as well as torque capacity

• Easy access clutch cover externally located for easy maintenance. Does not require gear cover removal for servicing

• Solenoid control for either 24 Volts DC or pneumatic operation

Lube System

• Cooler suitable for use with 100ºF/38ºC fresh water

• 40-micron filter incorporated into the design

• Auxiliary trailing pump system available upon request

bhge.combhge.com/gears

bhge.com/gears

© 2018 Baker Hughes, a GE company, LLC – All rights reserved.

Baker Hughes, a GE company, LLC and its affiliates (“BHGE”) provides this information on an “as is” basis for general information purposes and believes it to be accurate as of the date of publication. BHGE does not make any representation as to the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular purpose or use. BHGE hereby disclaims any and all liability for any direct, indirect, consequential or special damages, claims for lost profits, or third party claims arising from the use of the information, whether a claim is asserted in contract, tort, or otherwise. The BHGE logo is a trademark of Baker Hughes, a GE company, LLC. GE and the GE monogram are trademarks of General Electric Company used under trademark license.

BHGE_Lufkin_Drop-in_Applications_FS-080218

Lufkin RLS2100 marine gearCat 7271 drop-in marine gear

Lufkin RLS2100 marine gearLST drop-in marine gear

Rating

• 2350 HP @1,600 to 1,800 rpm per ABS rules

• Suitable for CAT 3516 or other high speed diesel engines

Standard ratios available

• 5.11:1

• 5.49:1

• 6.11:1

• 6.045:1

Estimated weight: 13,500 lbs/6,136 kg

Rating

• 2350 HP @ 900 rpm per ABS rules

• Suitable for EMD 567. 645. or GE L/V250, V228, CAT, MAK,MAN or other medium speed engines

Standard ratios available

• 3.03:1

• 3.45:1

• 3.50:1

Estimated weight: 16,000 lbs lbs/7,272 kg

For further information, please contact: VMS GroupTel.: +45 9622 1100E-mail: sales@vms.dkwww.vms.dk