beverage manufacturing equipment sale...“hitachi” inkjet printer model px-d2604a, #13822 cip...

Due to the closure of the Schweppes manufacturing site located in Moorebank NSW, Fallsdell Machinery has once again been appointed to handle the marketing and sale

of all their redundant equipment. Don’t miss this unique opportunity to purchase manufacturing equipment from one of the worlds leading manufactures,

Please contact Fallsdell for an on-site inspection additional information and pricing, all items are able to be viewed on www.fallsdell.com.au

Inspection by appointment only

BEVERAGE MANUFACTURINGEQUIPMENT SALE

Telephone: 61-2 9791 0933 Fax: 61-2 9791 0837 Email: [email protected] Web: www.fallsdell.com.au

SALE

MOOREBANK

SITE


30,000 ltr Stainless Steel Mixing Tank, top entry mixer with 2 bladed paddles #13877

20,400 ltr Stainless Steel Mixing Tank, totally enclosed, top entry mixer. 2 available #13876

15,000 ltr Stainless Steel Mixing Tank, top bridge with mixer with 2 x 3 bladed pitch

paddles. #13903

10,000 ltr, Stainless Steel Mixing Tank, complete with centrifugal pump. #13898

9,000 ltr Stainless Steel Dimple Jacketed Mixing Tank, top entry stirrer. #13874

9,000 ltr Dimple Jacketed Mixing Tank, complete with top entry mixer. #13896

9,000 ltr Stainless Steel Mixing Tank, top entry mixer. #13875

7,250 ltr Dimple Jacketed Mixing Tank, complete with top entry mixer, #13897

5,900 ltr Stainless Steel Mixing Tank, centre mounted stirrer with 1 x approx. 200mm dia

prop, #13879

Mixing Tanks: Stainless Steel Totally Enclosed


4,300 ltr Stainless Steel Tank, open top. with centrifugal pump. #13812

46,500 ltr Totally enclosed Plastic Tanks 4600 dia x 2950mm deep 9 available #13921

Stainless Steel Dimple Jacketed Silo, 60,000 ltr capacity, 2 Available #13910

“Sepa” Complete Effluent Water Treatment Plant #13915

9,000 ltr Stainless Steel Tank, complete with Centrifugal Pump.

#13904

600 ltr Mobile Stainless Steel Mixing Tank, top entry stirrer with

1 x prop #13880

135 ltr Stainless Steel Tank, #13901

Stainless Steel Tanks and Water Treatment


Pasteurising, Labelling Printing and Weighing

Ozonator System, with a 5,700 ltr, toally enclosed Tank, centrifugal

pump, with Prominent system, Type OZVA3001E/35G/HOZON, vari-

ous filters, and centrifugal pumps. #13871

“Pall” Stainless Steel Filter, Model LBVS 12, volume 29 Ltrs, 200 dia x 950mm high. 5 Available #13884

“Hipex” Pasteuriser, complete with 22 lengths 6mts long, pumps and tank. #13895

“Tronics” Labeller, double sided unit, complete with scroll infeed, overhead conveyor and third labelling head #13836

“Hipex” Pasteuriser, with a Heat exchanger, control panel, complete

with tank and valves. #13892

“Hitachi” Inkjet Printer Model PX-D2604A, #13822

CIP System, complete with stain-less steel tank, 5 x centrifugal

pumps, Filter, Heat Exchanger and quantity of pipework. #13893

“Ohaus” Scale, Defender 3000, 300 x 350mm platform, weighing

capacity of 30kg x 5 gram. #13887

Printing and Labelling Station, complete with 2 x “Aztro” Labellers and 2 x “Marsh” Unicorn printers 3200mm long slat conveyor 90

degree bend, #13839

Pallet Scale, 1500kg x 500grams, 1200mm x 1200mm galvanised

base, #13890


Fillers, Cooling Tunnel and Conveyors

Rotary Gravity Filler Monobloc System“Filmatic”, 36 Head Filler, (Speeds 2 Ltr - 140-160 bpm, 1 Ltr up to

190bpm, 4 Ltr Water Bottles, 55bpm) approx. 25mm dia nozzles, with a 8 head Capper, setup for a 2 Ltr Hot Fill, complete with scroll infeed,

9200mm long conveyor, Cap Elevator and unscrambler. #13829

Cooling Tunnel and Conveyor 2950mm wide belt x 16mtr long infeed, the cooling Tunnel which is

9600mm long with a 500mm high opening, with a 300mm long section on the outfeed, then a 110mm wide x 5200mm long straight section than

a 90 degree bend. #13832

Large Quantity of conveyors includingSlat Conveyor Line, 110mm wide x 15mtr long, 2600mm #13826

Slat Conveyor line, Approx 40 mtr total length including 90 degree, 180 degree and “S” bends #13831Slat Conveyor line, approx 21.5mtr long plus 90 degree bends and “S” bends #13833

Gravity Filling LineConsisting of a “Schlenker” 24 Head Gravity Filler unit currently filling 15 ltr plastic Jerry can (they only use 12 head), unit is setup with a 200mm

wide x 700mm long slat conveyor, then to a 90 degree bend with a 2200mm long infeed into a rotary unit then feeding to a manual cap placing system with handheld tightner, mounted on a 200mm wide x 4100mm long slat conveyor, with an Avery 230 Labeller, then another

conveyor 200mm wide x 2200mm long with an overhead Tronics Labeller, with gravity outfeed. #13821


Palletiser, unit is setup with a Colby elevating conveyor, then feeding onto a S shaped Conveyor system, cartons then enter the Palletising system,

and can be turned, then onto a pallet, pallet is lowered and then taken via the outfeed conveyor, complete with empty pallet stacker. #13843

“Schmalz”, Vacuum Bag LifterJumboErgo, 65kg capacity, complete with vacuum pump and Millsom

Hoist with a 5000mm long reach #13823

Palletiser, “FibreKing”, Model CP30, S/N 9017059, with aAllen Bradley touch screen, unit is setup with a in feed conveyor, units are fed

through the unit, and pushed onto a pallet, pallets are dropped down and fed out via a motorised roller conveyor 1300mm wide x 7200mm long discharge, complete with empty pallet stacking system. #13841

“SMI”, Case Packer and Collator, setup with a model Divipack 20. complete with a 450mm wide x

7800mm long infeed conveyor with dividers to make it 3 rows, then feeding into to a SMI WP300 unit, complete with flat carton stacking

system, Nordson Hot Glue unit, 2000 Built #13838

De-Palletising, Palletising, Cartoning and Materials Handling

De Palletiser, Currently running a visy pallet 1100mm x 1400mm, 1260mm wide x 6000mm long pallet infeed

conveyor, full controls, empty pallet stacker, Complete with walkway platform #13825

Drive Through Pallet racking3 Bays x 5.2 & 6.4mtr high - 8 deep. #13938

3 Bays x 5.2 & - 6.4mtr high 16 Deep . #1393911 Bays various heights - 10 deep #1394011 Bays various heights - 10 deep #139419 x bays 4800mm high - 3 deep #13942

4 x Bays of Various Heights - 3 Deep #13943


“Dae Chang” Blow Moulder, DC-SBM-110, single head, 2 cavity unit, currently manufacturing 15 Ltr type water Jerry cans. #13809

“Bekum” Twin head Blow Moulder, Model WE33910, 1984 Built, 10 Ltr Jerry type water can. #13801

“Creator” Plastic Injection Molding Machine, Model CI-300SS, 2 Tonne cap.#13802

“Haitai” Injection Moulder, Model HTL1390-F5, clamping force of 1390kn, injection capacity 230cm3, complete with Chiller #13808

Plastics equipment • Blow Moulders • Injection Moulders • Granulators

“Haitai Eurospec” Injection Moulder, Model HTW 250/C, 2.5 tonne capacity previously

manufacturing caps #13805

“HWA-LONG” Wadding and Induction Machine, complete with cap elevator and unscrambler,

#13807

“Chende” Injection Moulder, Model CJ250M3V, clamping force 2500kn, previously manufacturing

caps. 13806


Plant Services

“Ceccato”, Air Compressor, Model CSC 60 /8M, 45kw, complete with a Mark MDX 12000 Air Dryer and Receiver. #13908

“Ceccato”Air Compressor, Model CSD 75, 8 Bar, 55kw unit, with Walker Filtration Dryer and Air

Receiver. #13907

“Grosso” Ammonia Compressor Type RC611,132kw motor, Heat Exchanger, 5 x

Centrifugal Pumps and Air Receiver, #13917

Also AvailableStainless steel tables and trolleys

Drying racksScales and Balances

Torque testersInkjet Printers

Safety ShowersWorkshop equipmentLaboratory equipment

Plus Much more

“Ingersoll Rand” Air Compressor Type SSR and a “Hiross” Drystar Refrigeration Dryer, Model MDH 25A, with filter and Air Receiver. #13814

160 ltr Flammable Goods Cabinet, #13849

“Kaeser” Air Compressor and a KelAir Compressed Air Dryer Model D16A, 5hp, and complete with filter and Air Receiver. #13813

16,400 ltr “Storemasta”, Flammable Goods Cabinet, external dimensions of 6.6 x 2.5mtr, doors on both sides of the cabinet, #13916

“Baltimore” Cooling Tower, 2 available #13918 “Maxitherm” Boiler, Model 2000 MDN/1000, 2000Kw Capacity, Natural Gas, complete with blow down tank #13894

WANTED: USED MACHINERY, Single pieces or complete plantsDo you have an upcoming “PLANT CLOSURE” or “PLANT PROJECT” ?

Let Fallsdell run a successful sale for you!For a FREE appraisal contact Maurice on 02 9791 0933

beverage manufacturing equipment sale...“hitachi” inkjet printer model px-d2604a, #13822 cip...

Documents