betti_intro2009

8/7/2019 betti_Intro2009

1/67


2/67


3/67


4/67

Bevezets

A BME Gp- s Termktervezs Tanszk Intro kiadvnya immrhetedik alkalommal teremt publicitst az Ipari termk- s formatervezmrnk szakos hallgatk legsznvonalasabb munkinak. Az sszell-ts, a kpzs fkuszban ll Integrlt termktervezs, valamint aFormatervezs trgyak legjobb projektfeladatainak bemutatsa mel-lett a diplomatervekbl s szakdolgozatokbl knl vlogatst.

A kiadvnyban szerepl tmk soksznsge, mely a kpzs interdisz-

ciplinris jellegbl addik, remnyeink szerint felkelti majd azoknak aziparvllalatoknak, vllalkozsoknak, hazai s klfldi felsoktatsi in-tzmnyeknek is az rdekldst, amelyek eddig mg nem rendelkez-tek informcival a lassan 15 ves mltra visszatekint kpzsnkrl.Nekik ezzel az sszelltssal, a tjkoztatson tl, lehetsget isszeretnnk knlni a kapcsolatteremtsre, mindkt fl szmra hasznoss eredmnyes egyttmkdsre.

Bzunk benne, hogy a kiadvnyunk azoknak az ipari partnereinkneks oktatsi trsintzmnyeknek is szolgl jdonsgokkal, akikkel mrvek ta egyttmkdnk kzs projektfeladatok, diplomatervek, szak-dolgozatok vagy a kpzs tananyagnak fejlesztse sorn. Velk valeredmnyes egyttmkdsnk teremti meg a garancit arra, hogy azitt vgzett hallgatink sikeresen tudjanak bekapcsoldni leend munka-helykn a termk- s formatervezi problmk megoldsba.

Dr. Hork Pter Dr. Vradi KrolySzakfelels Tanszkvezet

bIntroduction

.


5/67

5

It is now the seventh time the issue Intro published by theDepartment of Machine and Product Design gives publicity to thehighest quality works done by students attending the IndustrialDesign Engineer program. Besides presenting the best projectstaken from Industrial Design courses and courses on IntegratedProduct Development, which series of courses are in the main focusof the education program, this edition also provides a selection ofdegree works.

Thanks to the interdisciplinary character of the program thecolorfulness of the themes shown by this issue will hopefully raisethe interest of the companies and enterprises, also institutes ofhigher education nationwide and abroad who recently had a lackof information about our education program having an almost 15year tradition. Those are the ones, to whom by this edit ion, besidesinforming, we would like to offer an option to establish contacts withus aiming a useful and fruitful cooperation.

We believe that everyone nds fresh information in the booklet, letthem be industrial partners or educational organizations with whichwe maintain a partnership for years on common projects, degreeworks or even on the elaboration of the educational materials. Thissuccessful cooperation guarantees that the students of ours willbe able to be successfully involved in solving the industrial designengineering -types of problems at their future employer.

Pter Hork, PhD Kroly Vradi, DScProgram coordinator Head of Department


6/67

Flvkzi feladatok

A termkek eszttikai funkcijnak magas szint kielgtse amszaki funkci megbzhat s gazdasgos teljestse mellett,komoly kihvst jelent a tervez szmra. Az Ipari termk- sformatervez mrnkkpzs legfontosabb jellegzetessge, aforma-, a mszaki-, az ergonmiai-, valamint a marketing smenedzsment ismeretek prhuzamos oktatsa s projekt felada-tokon keresztl val integrlsa.

A kpzs kt f, tbb flvet fellel trgycsoportjnak, a For-matervezsnek s az Integrlt termktervezsnek a projektfela-datai szemlletesen mutatjk be, hogyan lehet trekedni a formaijdonsgokra, valamint a forma s a mszaki tartalom egysgre.

A Formatervezs feladatok hallgatink egyni kreativitst, vi-zulis lmnyt teremt kpessgt tkrzik. Az Integrlt termk-tervezs projektek, a csopor tos s egyni munka tvzsvel, a

vals, team-ekben zajl mrnki tevkenysg innovatv lgkrtteremtik meg. Ezeknek a feladatoknak a vgeredmnye, a termkdokumentcin kvl, annak sajt kezleg ksztett zikai, vagyvirtulis 3D modellje s a prezentcit tmogat poszter.

fSemester projects.


7/67

7

It is a tough challenge for the designer to fulll the aestheticalfunction at a high level and at the same time to meet the technicalfunctions in a reliable and economic way. The main characteristicof the Industrial Design Engineer program is the parallel educationof aesthetic, technical, ergonomics, marketing and managementknowledge, which are then integrated in project tasks.

The project works of the two main groups of multi-semestersubjects, the Designing and the Integrated Product Developmentshow nicely how it is possible to reach for innovative shapes alongwith the unity of form and technical content.

The results of Designing projects represent the individual creativityand the visual experience establishing ability of our students. TheIPD projects create an innovative atmosphere of real team-basedengineering activities by combining individual and team work.

The results of those projects, besides the product documentation,are the self-made physical or virtual 3D model and a presentationposter of the product.


8/67

Golyra is a skill developing toy for 4-6years old children. It improves manual skills,perception and concentration skills. Toys withcomplex rules often make children uninterested.To avoid this problem we created a simple rule,the goal is to separate the balls by colour in thetwo segments of the toy. We intended to give aminimalist and geometric but also showy shapeto the product; therefore we chose the rotationalhyperboloid shape.

A Golyra egy kszsgfejleszt gyermekjtk,melynek clcsoportja az vodskor, 4-6 veskorosztly. A jtk a gyermek nommozgst,trltst s koncentrcis kszsgeit fejleszti.A tl bonyolult szabllyal rendelkez jtkokfel sem keltik a gyermek rdekldst, ezzelszemben a Golyra szablya nagyon egyszer,a gyermek feladata a klnbz szn golykklnvlasztsa a kt trrszbe. A jtknakletisztult, geometrikus formt kerestnk, melymgis gyelemfelkelt, ennek megfelelenvlasztottuk a forgsi hiperboloid formt.

Golyra

TervezkMondvai Diana, Galambos Mt, Vci BalzsEgyetemi konzulensVidovics Balzs, egyetemi tanrsegdTmaGyerekjtk 4-6 ves gyerekeknek

Design team membersDiana Mondvai, Mt Galambos, Balzs VciTutorBalzs Vidovics, assistant lecturerTopicToy for children aged 4 to 6 years

8


9/67

9

integrlt termktervezsi gyakorlat | ipd practice


10/67

The product is a toy-robot for 8-14 years old chil-dren, which can be made to walk. You can giveinstructions to it with the light of a simple ash-light, thanks to the photodiodes on the coverthat activate the motors through a Darlington-connection.

The Mszka has six legs and two engines,each operating 3 legs. Changing the direction of

the light affects the diodes on its back, we canforce the toy to change the direction of its walk.At this time only 3 legs move on one side.

The product may be released with covers ofmany different colours and graphic decorations,so that every child can choose the one that tshim the best. Our aim was to create a productwhich attracts the attention of children for scien-

tic issues and traditional moving toys.

A termk egy 8-14 veseknek sznt jtkrobot,melyet stltatni lehet. A jtkot zseblmpa-fnnyel lehet irnytani a burkolaton levfotdidknak ksznheten, melyek a lbakatmeghajt motorokat hozzk mkdsbe egyDarlington-kapcsolsos ramkrrel.

Hat lba van a Mszknak, kt motorja 3-3 lbat

tud meghajtani. A htn elhelyezett didkatklnbz irnyokbl megvilgtva lehetirnyvltoztatsra ksztetni a termket, ilyenkorcsak 3 lb mozog az egyik oldalon.

A termk tbbfle szn s grakj burkolat-tal kerlhet forgalomba, hogy minden gyermekmegtallja a hozz ill Mszkt. Clunk, hogyfelkeltsk a gyermekek gyelmt a tudomnyos

dolgok s a hagyomnyos mozg jtkok irnt.

Mszka

TervezkMzl Lajos, Szikszai Gusztv, Bdy AndrsEgyetemi konzulensDr. Gara Pter, tudomnyos munkatrsTmaMozg gyerekjtk tervezse

Design team membersLajos Mzl, Gusztv Szikszai, Andrs BdyTutorDr. Pter Gara, research associateTopicConcept of moving toy for children

10


11/67

11



12/67

The product is intended to promote SONYWalkman MP3/MP4 players. All of the fourbranches of the product line are representedby a player and to each of these players belongone pair of stepdancing shoes. With the helpof a control unit and 4 motors the actuatingmechanism is able to move the shoes eitherseparately or simultaneously. Each of the justmoving elements is lighted from above by acolourful led. The product was designed to tthe windows of Sony stores. When preparing thebasic concept and the shapes of the product wepaid high attention to the dynamic and elegantstyle of Sony.

A termk a SONY Walkman MP3/MP4lejtszkat hivatott reklmozni. A termkcsa-ld ngy f gt egy-egy lejtsz kpviseli,melyekhez egy-egy pr szteppel cip tartozik.A mozgat mechanizmus egy vezrl egysg s4 motor segtsgvel kln-kln s egyszerreis mozgathatja a cipket. Az aktulisan mozgelemeket fllrl 1-1 sznes led vilgtja meg. Atermket a Sony boltok kirakataiba terveztk. Azalapkoncepci s a formavilg megalkotsakornagy gyelmet szenteltnk a Sony dinamikus selegns stlusnak.

Step-man

TervezkPohoriljk Adrn, Lator ZsoltEgyetemi konzulensVarga Andrs, egyetemi tanrsegdTmaMozg reklmhordoz

Design team membersAdrin Pohoriljk, Zsolt LatorTutorAndrs Varga, assistant lecturerTopicMoving booster

12


13/67

13



14/67

Our assignment was to design a load-controlleror load-relief equipment which would help therehabilitation process of patients gone throughleg injures, fraction or surgery, or amputation.The unit could be attached to the shoes of thepatient, and able to control if the limb is overor under loaded, the degree and distribution of

load, indicates if the patient over- or underloadsthe limb, and it is also able to contemporarilysave the data for further evaluation. The producthas two main parts: the shoe insoles with built-inpressure sensors, and the control box which isto be attached on the ankle. The measurementof the load is done by FSR sensors on fourpoints according to the right walking pattern.

The over- or underload is normally indicated byvibration, and in a critical situation by beeping.

Tervezsi feladatunk egy olyan rehabilitcistehermentest eszkz megtervezse, amely azalsvgtagi srlsen, trsen vagy mtten,illetve lbamputcin tesett pciensek rehabili-tcijt segti. Ez az eszkz a betegek cipjhezrgzthet, kontrolllja a srlt tag esetlegestl- illetve alulterhelst, a terhels mrtkt seloszlst folyamatosan mri, jelzi, ha a beteg

tl - / vagy alulterhel, illetve a mrt adatokatfolyamatosan menti az utlagos kirtkelstlehetv tve.

A termk kt f rszbl ll, egy nyomsmrszenzorokkal egybeptett talpbett rszbl, sa bokra rgzthet kontroll boxbl. A terhels-mrs 4 ponton trtnik, a helyes jrsmintaalapjn FSR szenzorok segtsgvel. A tl- ill.

alulterhelst a szerkezet vibrlssal, illetvekritikus llapotban spolssal jelzi.

Talp

TervezkBocsi Szabolcs, Eperjesi Tmea, Kapelner AndreaEgyetemi konzulensVidovics Balzs, egyetemi tanrsegdTmaRehabilitcis tehermentest eszkz tervezse

Design team membersSzabolcs Bocsi, Tmea Eperjesi, Andrea KapelnerTutorBalzs Vidovics, assistant lecturerTopicDesign of a load-controller equipment forrehabilitation use

14


15/67


16/67

In the framework of Integrated Product DesignII we had the task of designing toys. Our groupof three, called Kidd, chose and realized theproduct concept of Ariel Lvay.

The group worked together from pitching ideas,elaborating and developing details until produc-ing the nished working model. The structure

itself is controlled by two knobs, one to move thefork vertically and another to steer the vehicle.Three pallets also belong to the ensemble,stored together with the forklift in the eco-friend-ly box designed by the group.

The model is made of wood and metal andnished with sprayed paint and varnish.

After nishing the term project we tested the toywith success in a group of children.

Az Integrlt termktervezs II. tantrgy kereteinbell gyerekjtk tervezsvel foglalkoztunk.Kidd nev hromfs csapatunk Lvay Arieltermkjavaslatt dolgozta ki a flv sorn.tletelsben, rszletek kidolgozsban,tovbbfejlesztsben, egszen a ksz shasznlhat modell ltrehozsig a csapatkzsen dolgozott. Kt tekerkarral irnythatjuk

a szerkezetet, egyikkel a villt fggleges irny-ban mozgathatjuk, a msikkal kormnyozhatunk.A jtknak rsze hrom klnbz raklap is,amit a jtkkal egytt trolhatunk a csapat ltaltervezett krnyezetbart csomagolsban. Amodell elksztshez fa s fm alapanyagokathasznltunk, majd festkkel s lakkal kezeltk. Aflves feladatot egy a gyerekek krben tartottsikeres tesztelssel zrtuk.

Targonca

TervezkKelemen Zsa, Sarodi Flra, Lvay ArielEgyetemi konzulensCollognth Dezs, egyetemi tanrsegdTmaGyerekjtk 4-6 ves gyerekeknek

Design team membersZsa Kelemen, Flra Sarodi, Ariel LvayTutorDezs Collognth, assistant lecturerTopicToy for children aged 4 to 6 years

16


17/67


17


18/67

The LG HI-MACS Design Contest was orga-nized in 14 countries with the title Light. It wasa condition to use the new translucent HI-MACSmaterial. Different elements from this materialcan be joint seamlessly, so objects with impos-sible looks can be created. I was the winner ofthe Hungarian round of the contest. The idea ofeach national winner was turned into a prototype

and was shown on the Milan internationalfurniture exhibition in the Zona Tortona event.My presentation was very successful; I receiveda prize for the best presentation. The name ofmy prototype is BBL, which stands for Big BangLamp, because it opens from a sphere to agalaxy- or a ower-like lamp and this is also theway to change the intensity of the light. It is suit-

able for hotel halls or conference rooms.

Az LG HI-MACS Design Contest 14 orszgbankerlt megrendezsre Fny cmmel. Megktsvolt, hogy hasznljuk az j, fnytereszt HI-MACS anyagot. Az anyag lehetv teszi, hogy avglegests sorn az elemek illesztsei teljeseneltnjenek, gy akr lehetetlen kialaktsok ismegvalsthatk. A magyar fordult megnyer-tem. Minden orszg gyztesnek tervt me-

gptettk, s killtottk a Milnban rendezettnemzetkzi btor killts Zona Tortona rszn.A prezentcim nagyon sikeres volt, elnyertema legjobb prezentcirt jr djat. A tervemneve BBL, mint Big Bang Lamp, melyet azrtkapott, mert egy gmbszersgbl egy nagyobbcsavart formv nyithat, azaz gmbblgalaxiss vagy virgg nylik, ezzel llthatka fnyviszonyok. Alkalmas vilgts szllodk

elterbe vagy kzssgi tereibe.

Big Bang

TervezCsire GzaEgyetemi konzulensLelkes Pter DLA Habil., egyetemi tanrTmaLG HI-MACS design contest 2009 Fny

DesignerGza CsireTutorPter Lelkes DLA Habil., professorTopicLG HI-MACS design contest 2009 Light

18


19/67

formatervezs | designing

19


20/67

Tricsukli is a multi-function tricycle for 2-5years old children. The seat-height is adjustable,adapting to the fast growth of children at thisage. By changing the gage of the rear wheels,it can be transformed into a bicycle, helpingthe child learn the real cycling. Being foldableit is easy to store and to carry - a great help inhouses without elevators. Its dynamic forms lift

this tricycle to the status of a vehicle. It is madeof wood, to heighten the childrens afnity fornatural materials.

A Tricsukli egy tbbfunkcis tricikli 2-5 vesgyermekeknek. Az lsmagassg llthat,alkalmazkodva ezzel a kisgyermekek gyorsnvekedshez. A hts kerekek nyomtvjnakvltoztatsval ktkerekv alakthat,gy segtve a gyermeket az igazi biciklizsmegtanulsban. Ezenkvl sszecsukhat,gy kisebb helyen trolhat s knnyebben

szllthat - ez nagy segtsg pldul alift nlkli hzakban. A tricikli dinamikusformavilga a jrmvek kz emeli a jtkot.Fbl kszlt, hogy nvelje a gyermekektermszetes anyagok irnti szeretett.

Tricsukli

TervezKele SraEgyetemi konzulensJoanovics Lszl, egyetemi tanrsegdTmaPedllal hajtott jrm

DesignerSra KeleTutorLszl Joanovics, assistant lecturerTopicPedal powered vehicle

20


21/67

integrlt termktervezs | ipd practice

21

SDMV


22/67

My design is a set of furniture (containing aspecial operative chair a mobile standingsupport and a desk) mainly for special schools inthe Hungarian education.

The form of the chair allows the moving for thestudent, so they can concentrate on the lessonfor much longer time. The lack of moving andexcercise is a common problem in most schools

but its even more important in some specialcases.

I created a kind of furniture which can be their ownof every single student. Everybody has a chair andtable with different height, a certain colour and onevery chair there is a small case for articles forpersonal use.

A tervem egy ll mukaszkbl s hozztartozasztalbl ll iskolabtor, melyet elssorbanspecilis iskolkba kpzeltem el.

A szk talpnak kialaktsa lehetv teszi amozgst, gy a tanulk sokkal hosszabb ideigtudnak ugyanarra a feladtra koncentrlni. Amozgshiny ltalnos problma ugyan, despecilis igny dikoknl klnsen fontos.

Az llthat magassg szkbl s asztalblmindenkinek csak a sajtja knyelmes igazn,a szkeken elhelyezett kis trolkban mindenkia sajt trgyait tarthatja s a klnbz sznekis segtenek abban, hogy minl inkbb sajt tr-gyak legyenek. A magassg lltshoz szksgvan egy kulcsra is - ami akr a tanterem kulcsa is

lehet - gy elkerlhetek a balesetek, mivel a gyer-ekek nem tudjk tlltani a szkeket egyedl.

SDMV

TervezLrincz DnielEgyetemi konzulensKrosi Zoltn, egyetemi adjunktusTmaOpen Arhcitecture Challange A jv tanterme

DesignerDniel LrinczTutorZoltn Krosi, assistant professorTopicOpen Architecture Challange Classrom of the future

22

f | d i i


23/67


23

ANT


24/67

The aim was to design a vehicle which is able toexpress emotions and to behave actively.

In this way it becomes a part of the trafc, theintentions, direction or motivations of which maybe read of its movements.

The independent suspensions and the bug-likebody enable the product to react to different

situations with different body language. Thesesituations are for example the start, expressingfear or happiness, or in this way we can makedifference between slow walking or fast speedrunning. The active behaviour is important forexample in the bend, when a regular vehiclewould lean out, this vehicle holds against thecentrifugal force. It makes it stable, and theheading can be read in a glance.

A cl egy olyan jrm tervezse volt, amelykpes kifejezni az rzelmeit, illetve aktvanviselkedik. Ezltal olyan szerepljv vlhata kzlekedsnek, amelynek a mozdulataiblleolvashat, hogy mit fog tenni, merre indul,vagy hogy mirt teszi azt. A fggetlen futmveks a rovarszer kialakts teszi lehetv, hogya termk klnbz lethelyzetekre klnbz

testhelyzetekkel tudjon reaglni.Jellemzen ilyen helyzet a nekirugaszkods, aflelem vagy az rm kifejezse, de ezltal meg-klnbztethetjk a lass stlgatst s a nagysebessg szguldst is. Az aktv viselkedspldul a kanyarban jelentkezik, ahol egy hagyo-mnyos jrm a tmegnl fogva kifel dl, ottez a jrm ellen tart a centrifuglis ernek, mely

stabilabb fekvst, s egy pillantssal leolvashatmozgsirnyt jelent.

ANT

TervezRzsa MiklsEgyetemi konzulensKrosi Zoltn, egyetemi adjunktusTmaEmbert magba foglal trgy

DesignerMikls RzsaTutorZoltn Krosi, assistant professorTopicObject that embodies a human

24



25/67


25


26/67


27/67

27

For this chapter of this years edition a selection was done fromthe best diploma projects of the last ve-year university grade andthe degree works of the rst seven-semester BSc graduates. Thenal projects in both educational forms conserving the practicalfeature of them focus on solving real, company-hosted problems.Depending on the rst assignment from the pillars of the programsometimes the designing, sometimes the technical design is moreemphasized, besides the integrated application of the other elds

of science.In comparison of the diploma projects to the BSc degree worksit can be stated that the difference is not in the quality of theelaboration but in the spread and complexity of the tasks, as it isproven by this selection.

This joyful fact, and the Industrial Product Engineer MSc program,which was just started in the fall of year 2009, the number andpreparedness of applicants, and also the experience of teachers

could guarantee that the switch to the bi-level education will notresult in a decrease of level in the domestic industrial designengineer education.

Kirchmayer Andrea


28/67

I think that the most important point in addi-

tion to the execution of the basic functions is tocreate a perfectly usable bus shelter, which canbe placed in different downtown areas. This is a

junction which merges into its environment andshows simplicity instead of striking. It gives infor-mation about the services in many ways, so itsdenitely recommended for the popular districts.Its built up from modules with the use of qualitymaterials. Its internal parts efciently provideticket booking, passenger information system,and waste gathering in one compact block. Thebus shelter can be enlarging to the desirablesize because of the backside and roof modules.Double-roof structure can be built too, whichcan be used at the middle-platform stations. The

damaged parts could be changed in a faster andsimpler way.

Az alap funkcik teljestse mellett azt tartom

legfontosabbnak, hogy egy jl hasznlhat,tbbfle belvrosi helysznen is helyt llmegllt tervezzek. Egy olyan csompontot,mely igazodik az adott krnyezethez s nema kirv feltnst, hanem az egyszersgethirdeti. Tbbfle mdon is informl a hozzkapcsold jrmvekrl, emiatt kifejezettenajnlott a frekventltabb vrosrszekbe.Modulokbl, minsgi anyagok hasznlatvalpl fel. Beptett egysgei a jegy-rustst,utas informlst, hulladkgyjtst hatkonyan,egyetlen kompakt tmbben ltjk el. A htfals tet modulok rvn a megll kvnt mretigbvthet. Lehetsg van duplatets megllltrehozsra, mely a kzpperonos villamos-

megllkban alkalmazhat. A meghibsodott e-lemek gyorsabban, egyszerbben cserlhetek.

KirchmayerAndrea

Buszmegll tervezseEgyetemi konzulensFodor Lrnt DLA, egyetemi docensKls konzulensLng Xnia Viktria, Direct-Line Kft.

Design of a bus shelterTutorLrnt Fodor DLA, associate professorConsultant at companyXnia Viktria Lng, Direct-Line Ltd.

28

szakdolgozat | bsc degree work


29/67


29

MolnrL. Pter


30/67

My degree work is part of a larger scalepublic transportation project on the Danubeat Budapest, called Duna Express. I had tointegrate the Duna Express ship line into thevisual (symbolic) and transportation (logical)system Budapest with the central ship stop.The square and the riverbank area provide avery unique environment. I put the ship stationon the lower quay of Buda, right next to thesquare in Northern in the level of the upperquay. This way it saves space and doesnt af-fect the view from Batthyny square. It is easyto connect it with the nearby METRO and sub-urban railway lines.My principals for creatingthe visual elements were sensibility, elegance,clarity, transparency and speed. I made a verycraggy geometric, still organic concept, and I

designed every part I could to t this image,trying to make a total design.

A szakdolgozat clja a jrat szimbolikus, vizuliss logisztikai beillesztsnek koncepcija a Bat-thyny tr kzlekedsi s ptszeti rend-szerbe, valamint a kapcsold ptett s gyr-tott elemek koncepcijnak elksztse, s azokmegvalsthatsgnak elemzse. A megllelhelyezsvel tbb fontos korltoz krlmnytis sikerlt megkerlnm: a megll gy kpeziszerves rszt a Batthyny tr kzlekedsi

rendszernek, hogy valjban nincs is a tren.Felkelti az emberek rdekldst, de nembefolysolja az autforgalmat s nem konkurla Parlamenttel s a Vrral - radsul kzvetlensszekttetse van mozglpcsn keresztl aHV-megllval. Ers, egysges geometrikusformai koncepcit alkottam, amivel marknsarculatot alaktottam ki a jratnak: praktikus,elegns, tiszta s gyors. Ksbb ehhez igaztot-

tam a megll sszes elemt, trekedve egytotlis design-ra.

A Duna Express hajjrat Batthyny trikzponti meglljnak intermodlis kialaktsaEgyetemi konzulensKrosi Zoltn, egyetemi adjunktusKls konzulensGtz Sndor, Ganz Danubius Vitla Kft

Intermodal design of the ship station of DunaExpress ship line at Batthyny sqareTutorZoltn Krosi, assistant professorConsultant at companySndor Gtz, Ganz Danubius Vitla Ltd.

30



31/67

g | g

31

Nagy Bernadett


32/67

My goal was to design a mobile child seat thatmeets the standards of the Design for Alltheory and that is equally useful and appropriatefor both healthy and handicapped children. Theproduct is a safety seat of which the main advan-tage lies in its comfort features. Since the seatcan be turned to the side by 90 degrees, the

child can be seated in a more comfortable way.The seat has been designed for kids weightingbetween 9-36 kilograms. The accessories ofthe seat such as the adjustable seat-back, theremovable ve-point belt, the footrest, the strapguide and many other things all provide comfortand safety.

A clom egy mobil gyermekls tervezse aDesign for All elmletnek megfelelen, melysrlt s p gyermekek szmra egyarnthasznos s megfelel. A termk egy biztonsgils, melynek legnagyobb elnye abban rejlik,hogy sokkal knyelmesebben lehet beltetni agyermeket az autslsbe, mivel az kifordthat

90 fokban. Az ls 9-36 kg kztti gyermekekrszre kszlt. Olyan kiegsztkkel vanfelszerelve, melyek mind a knyelmet s abiztonsgot szolgljk. gy, mint az llthatmagassg httmla, kiszerelhet 5 pontos v,lbtart, vvezet s mg sok ms.

gy

Mobil gyermekls tervezse halmozottansrlt s p gyermekek rszreEgyetemi konzulensJkai Erika, egyetemi adjunktusKls konzulensBacsk Gyrgyi, Mozgsjavt ltalnos Iskola,Csillaghz tagozat

Mobile child seat for multiply handicapped andhealthy childrenTutorErika Jkai, assistant lecturerConsultant at companyGyrgyi Bacsk, Csillaghz

32



33/67

33

Nagy Orsolya Viktria


34/67

The topic, the goal of my thesis work was todesign such a bathroom equipment family, whichis made of concrete being accorded to the prod-ucts and the branding of the IVANKA ConcreteDesign Ltd, the company who has given theassignment. According to the existing productsof the company I had to design such a productfamily which contains modern design, innova-

tive solutions, and the items can be produced bysingle piece productions or short-run production.The product family contains 3 members, a de-sign-basin with shape of the pebbles, a shower,which contains also on the ceiling tted showerhead, and a heatable, ergonomically shaped 2in1 bathtub or wellness warm bed.

Szakdolgozat feladatom tmja, clja egyolyan frdszobai termkcsald tervezsevolt, elssorban beton alapanyagbl, mely

jl illeszkedik a szakdolgozatot ad cg,azaz az IVANKA Beton Design Kft. meglvtermkvonalba. A termkknlat jellemzi, hogymodern formatervezs s innovatv, jszermegoldsaokkal rendelkez, egyedi vagy

kissorozatgyrtssal elllthat termkekblll. Az ltalam tervezett termkcsald 3 tagblll; egy kavicsszer design mosdkagylbl,egy zuhanytlcbl, mely mennyezetre szereltesztet zuhanyfejjel is rendelkezik, s egyfthet, ergonmikus kialakts 2 az 1-benkdbl, n. fthet kaldrium gybl.

Frdszoba berendezs tervezse, a beton,mint elsdleges alapanyag felhasznlsvalEgyetemi konzulensFodor Lrnt DLA, egyetemi docensKls konzulensIvnka Andrs, Ivanka Beton Design Kft.

Design of bathroom equipment using concreteas a primary materialTutorLrnt Fodor DLA, associate professorConsultant at companyAndrs Ivnka, Ivanka Beton Design Ltd.

34



35/67

35

Nieto Ramn


36/67

My task was to design an air therapy Jacuzzi

using salty water. After identifying the existingtrends and solutions, I made substance andcolour studies, onto the already tested andsaleable products. I started to generate ideas intwo directions: organic and geometrical forms.

I prepared the ideas in proportion of 1:20 to seein the space how the forms develop. I examinedthe applicable standards. With the selection

of the structural elements and machines, Iprepared a assembly drawing which helped inthe additional planning. I made patent researchnally, and I did not nd similar product orsolution yet in the Hungarian or in the Worldpatent database. I prepared a cost calculationin which can be visible that the realization of theproduct comparing to the other luxury tubs onthe market, is realistic.

Miutn felkutattam a meglv trendeket,

megoldsokat, szn- s anyagtanulmnyokatvgeztem a mr bevlt s kelend termkekre.Az tleteket 2 irnyban indtottam el: organikuss geometrikus formk tervezsvel. Az tletektovbbfejlesztse keretben 1:20-as arnymodelleket ksztettem hogy lssam a trbenis, hogyan alakulnak, illeszkednek a formk.Felkutattam a vonatkoz szabvnyokat.

A szerkezeti elemek s gpek kivlasztsvalelksztettem egy sszelltsi rajzot, melysegtsget nyjtott a tovbbi tervezsben. Vglszabadalmi kutatst vgeztem, nem talltammg hasonl termket vagy megoldst amagyar, illetve vilg szabadalmi adatbzisban.Ksztettem egy rkalkulcit, amiben lthat,hogy a termk megvalstsi kltsge a piaciluxuskdakhoz kpest relis.

Lgterpis, ssviz pezsgfrd tervezseEgyetemi konzulensZalavri Jzsef, egyetemi adjunktusKls konzulensPap Tibor, Deln Uszodatechnika Bt.

Design of an air therapy Jacuzzi using salty waterTutorJzsef Zalavri, assistant professorConsultant at companyTibor Pap, Deln Uszodatechnika Ltd.

36



37/67

37

Rebi Zsuzsanna


38/67

In my degree work my goal was to bring back theatmosphere of the old times, when the disheswere served on gueridon tables. I intended torecall the time when the food was served asidethe table right in front of the guest, when theservice was more spectacular and more intimatethan nowadays. My design carries modern andclassical elements as well; therefore it would

t in the most restaurant environments. In thedrink-trolley the most equipment can be foundfor the precise wine-serving, e.g. decanter, foilcutter, drip collar, corkscrew, etc. Besides, aglass-holder is found in the trolley, designed forpractical and safety issues. The product is madeof laminated plywood, on which the engravinggives a unique decoration effect.

Clom volt a szakdolgozatomban megtervezetttermkkel visszahozni a rgi idk hangulatt,amikor a gueridon asztalokkal szolgltk fel azttermekben az telt. Szeretnm felidzni azt azidt, amikor kzvetlenl a vendg eltt, az asztalmellett zajlott az tel tlalsa, amikor ltvnyos-abb, hangulatosabb volt a felszolgls mintnapjainkban. Termkem formavilgban moderns klasszikus elemeket is magban hordoz, gya legtbb tteremben meglln a helyt. Az ital-kocsiban megtallhat az sszes eszkz, amelya precz borfelszolglshoz szksges, mint pl.:dekantl, kapszulavg, cseppfog, bornyit.Emellett egy praktikusabb s biztonsgosabbpohrtar t kialakts is tallhat benne. A kocsifurnrozott rtegelt lemezbl kszl, amelyen amars klnleges dsztst ad a trgynak.

Borkstols prezentcis eszkznekmegtervezse italkocsiEgyetemi konzulensZalavri Jzsef, egyetemi adjunktusKls konzulensPozsonyi Jzsef, Desidea Stdi

Design of presentation equipment for winetasting drink-trolleyTutorJzsef Zalavri, assistant professorConsultant at companyJzsef Pozsonyi, Desidea Studio

38



39/67

39

Szab Jzsef


40/67

Topic of my thesis is developing a penthouse

with solar collector. The task is to construct asolar collector, which has similar power param-eters as the competitors but needs substantiallylower investment. As a basic type I have chosenthe type of the solar collector, called pillowcollector. It is an absolutely simple constructionwith many good qualities, for example the longexpectation of life. The calculations veried the

practical experience, that each m2 of the pillowcollector is able to serve the daily need of hotwater for one person, weather depending. Thedesign of the penthouse needs to suit to thestyle of the house. For this reason I suggest toapply two sheet metal wings for the two sides ofthe penthouse, which can be designed for theactual demand of the customer.

A feladatom egy olyan napkollektor tervezse

volt, melyet eltetknt is lehet hasznlni, sa piacon lv termkekkel szemben kisebbberuhzst ignyel, m teljestmnyben shatsfokban nem marad el versenytrsaitl.Alaptpusknt a skkollektort vlasztottam,ennek is egy kevsb elterjedt vltozatt, aprns kollektort, mivel ez a legegyszerbbfelpts, legolcsbb s igen idtll vltozat.

A htani szmtsok megerstettk a gyakorlatitapasztalatot, hogy a prns kollektor egy ngy-zetmtere nyri idszakban kpes kielgteniegy ember egy napi melegvz-szksglett. Akollektort eltetnek is szntam, gy szksges,hogy illeszkedjen az plethez. A formai egysgrdekben ktoldalt a kollektorhoz illeszthetegy-egy szrny, knnyen varilhatk, gy akregyedi kivitelben is elkszthetk.

Napkollektoros eltet tervezseEgyetemi konzulensErdsn Slley Csilla, tudomnyos munkatrsKls konzulensPozsonyi Jzsef, Desidea Stdi

Design of penthouse using solar collectorTutorCsilla Slley, research associateConsultant at companyJzsef Pozsonyi, Desidea Studio

40



41/67

41

Szkely Anett


42/67

The task of the degree work was to design anew, innovative lighting, the spectacle of whichis built on the special phenomena of light.To reach realistic results a special imagingsoftware, based on physical calculations, wasused called Maxwell Render throughout thedesign process. TRINITY atmospheric lightutilizes the refraction ability of prisms. Differentshaped and colored lights are projected on the

wall by the optical system of 6+1 bent prismsand the 9 high-performance LEDs. To reach thedesired refraction it uses a special lens designedfor 9 LEDs, which focuses the rays in a 10degrees range. All prisms are easy to remove,therefore their number could be varied to ourtaste. Using an appropriate piece of accessorythe light source could be mounted on the wall or

even on the ceiling.

A szakdolgozat feladata egy j, innovatv vilg-ts megtervezse volt, mely a fny specilis

jelensgeire pti ltvnyt. A valsgheredmnyek elrshez egy specilis, zikaiszmtsokra pl kpalkot programot, aMaxwell Rendert hasznltam a tervezs egszfolyamata alatt. A TRINITY hangulatvilgtsa prizmk sznbont kpessgt hasznlja fel.Klnbz formj s szn fnyeket vett a falra

a 6+1 db ves prizma s a 9 nagyteljestmnyledbl ll optikai egysg segtsgvel. Ahhoz,hogy megfelel sznbontst rjen el, egy speci-lis, 9 ledhez tervezett lencst hasznl, mely afnysugarakat 10 fokos tartomnyba koncent-rlja. Az sszes prizma knnyen eltvolthat,gy szmukat kedvnk szerint varilhatjuk.Megfelel kiegsztvel felhelyezhetjk a falra

vagy akr a mennyezetre is.

Vilgts tervezse szmtgpes (ray tracing)szimulci segtsgvelEgyetemi konzulensVarga Andrs, egyetemi tanrsegdKls konzulensPozsonyi Jzsef, Desidea Stdi

Design of lighting aided by computer (raytracing) simulationTutorAndrs Varga, assistant lecturerConsultant at companyJzsef Pozsonyi, Desidea Studio

42


43/67

Vas Tnde


44/67

The assignment was to design a modern indoor

shading system which breaks with the ordinarymethods. The product was developed on the ba-sis of my idea. I realized that there is potentialityin this eld of design because the shades beingused nowadays are quite simple ones and justdiffer in small details. I decided to create an in-door blind which pieces together with an outdoorshutter. My aim was not to absolutely dim out, just

to strain the incoming light. I made up this productinto home surroundings. In my opinion I couldreach my goals since the product is modern, cre-ative and variable. It consists of petals which areeasily adjustable by hand. It can be positionedanywhere in front of the window by the help of theinner handle. The amount of the incoming lightcan be controlled by the rotation of the petals.

Clom egy olyan beltri rnykol tervezse

volt, ami szakt az eddigi hagyomnyokkal,kreatv mdon ltja el a fggny szerept,megjelensben s mkdsben is jat mutat.Az rnykolt otthoni krnyezetbe terveztem,s a cl nem a teljes sttts elrse, hanem aberkez fny megszrse, mrsklse volt. Aszirmok az ablak eltt brhov pozcionlhatks brmilyen szgben kinyithatk. Ezt egy snesrendszer s kt rugs feszts oldja meg. A vz-szintes helyzet a karnison val elhzssal vl-toztathat. Ez az rnykol mindenki szmraazt nyjtja, amit a felhasznl kvn. Ha valakiteljes lefedst szeretne, akkor tbb elemetvsrol, ha csak hangulati elemnek szeretnhasznlni, akkor kevesebbet. A megvsrolttermk sokflekppen varilhat, tetszlegessznekben rendelhet, gy nem lehet megunni.

Beltri rnykol tervezseEgyetemi konzulensVarga Andrs, egyetemi tanrsegdKls konzulensPozsonyi Jzsef, Desidea Stdi

Design of a modern indoor shading systemTutorAndrs Varga, assistant lecturerConsultant at companyJzsef Pozsonyi, Desidea Studio

44



45/67

45

Wettstein Dorottya


46/67

I had the idea to promote Hungarys mineralwater by the water fountain. Hungary is rich inmineral water, we can be proud of our naturaltreasure. Every distribution has its own fountainsupplied by its own mineral water, to maintainit and in exchange for advertisement. I want toattract the attention to the healthier life. My taskwas to design a modern special water fountainin the city of Budapest. This water fountain is

different from the usual city fountains, both inits function and form. I intended to recall theoriginal role of the fountains: meeting point forthe citizens. The main advantage is that it canbe installed anywhere you want since it is amobile fountain, which should be suitable for thecity life.. My design is based on the principle ofthe balloon fountain in the ofce.

Az ltalam tervezett ivkt eltr a megszokot-taktl mind formjban, mind mechanikjban,mind a vz minsgben. Elkpzelsem azvolt, hogy visszaadjam a kutak rgi szerept:tallkozsi pont, megpihensi lehetsg a for-galmas vrosi htkznapokban. A kt mkdsielve az ismert 19 literes ballonos vzadagolkrapl, csak nagyobb mennyisg vizet kpes

raktrozni, s szolglni. A kt teljesen mobil; azenergiaelltst a tetn elhelyezett napelemekkeloldottam meg. Clom az volt, hogy ezen kutakltal a vros klnbz forgalmas kzterein amagyar svnyvzvllalatok reklmozni tudjktermkeiket, ezzel is felhvva a gyelmet azegszsges letmdra, valamint vilghrestermszeti kincseinkre.

Ivkt tervezse innovatv megoldsokalkalmazsval, vrosi krnyezetbeEgyetemi konzulensFodor Lrnt DLA, egyetemi docensKls konzulensRkos Andrs, Direct-Line Kft.

Design of innovative drinking fountain in urbanenvironmentTutorLrnt Fodor DLA, associate professorConsultant at companyAndrs Rkos, Direct-Line Ltd.

46



47/67

47

Bta Istvn


48/67

My work was aimed at developing a newaccessory part for a vacuum-cleaner to bettermeet the consumers demands. The toolwas created for cylinder machines of the topcategory. Three suction nozzles are combinedin the product: an electric rotating brush, acorner- and an edge-head. The essence of myidea is that we do not need to lean down in orderto change the nozzles, we can simply push abutton on the handle of the vacuum-cleaner

to rotate the nozzle in the right position. Thismovement is produced by a small stepping-motor. Completely new ideas appear on thesuction nozzle, for example a dust-sensorcombined with the digital display. The easy-to-move function is supplied by three ball-shapedwheels. My concept combines solutions thathave not appeared on the market yet. With theuse of them, vacuum-cleaning will be more

comfortable, more efcient and more enjoyable.

Clom egy j, a fogyaszti ignyeket jobbankielgt porszv tartozk kifejlesztse volt.A ltrehozott eszkz fels kategris porszvkszlkekhez kszlt. A termk hrom fejetegyest: egy elektromos forgkefs, egy saroks egy perem-szvt. Lnyege, hogy ezekcserlshez nincs szksg lehajolni, elg egygombot megnyomni a szvcs markolatn, gy

a fej a megfelel llsba fordul. Errl egy kismret lptet motor gondoskodik. jdonsgtovbb pldul a porszenzorral kombinltdigitlis kijelz. A knny mozgathatsgrl3db golykerk gondoskodik. Az j koncepcimolyan funkcikat egyest, melyek a piaconeddig nem jelentek meg. Hasznlatval aporszvzs knyelmesebb, hatkonyabb s

lvezetesebb vlik.

j tartozk fejlesztse porszv kszlkhez

Egyetemi konzulensDr. Gara Pter, tudomnyos munkatrsKls konzulensKiss Istvn, Electrolux Lehel Kft.

Developing an innovative accessory forvacuum-cleanerTutorDr. Pter Gara, research associateConsultant at companyIstvn Kiss, Electrolux Lehel Ltd.

48

diplomamunka | degree work


49/67

49

Csire Gza


50/67

I created a working, multi-functional furnitureas degree project. It is modern and fullls theexpectations of the target group. Throughextensive research I have found a site wherethere is an urgent need for transformablefurniture. It cuts the time of rearranging a hall.With my product design in most of the casesit is not necessary to carry any xtures in and

out from the storage. All the different types offurniture needed on different occasions can becreated with this single system. It consists of2 pieces of transformable furniture and a lot ofpossibility. As for further development I want tolighten the structure in the future, and rethink thefooting of it. The screws and xing will be morehidden. The development of the mechanism will

continue after creating the rst prototype.

A diplomaterv egy mkd, tbbfunkcisberendezsi trgy tervezse, ami megfelela kor s a clcsoport elvrsainak. Egy-egy terem trendezse esetn nagybancskkenthet az ahhoz szksges id azzal,hogy a legtbb esetben nem szksges, vagyminimlis mrtk a btorok ki- s behordsa,mivel kzvetlenl kialakthatak a klnbzelrendezsek egymsbl. A mindssze kt

elembl ll varilhat rendszer segtsgvelgazdag, vltozatos formavilg elrendezsekhozhatak ltre, amelyek megfelelnek aza klnbz rendezvnyek elvrsainak.Elssorban a szerkezet knnytsvel s albak tovbbi tgondolsval lehetne a termkettovbbfejleszteni. A csavarok s rgztsektkletesebb elrejtse s a mkds fejlesztse

a prototpus elkszlte utn folytatdik.

50

Tbbfunkcis berendezsi trgy tervezseEgyetemi konzulensCollognth Dezs, egyetemi tanrsegdLelkes Pter DLA Habil., egyetemi magntanrKls konzulensDr. Valent Tams, Polytrade CE

Multi-functional furnitureTutorDezs Collognth, assistant lecturerPter Lelkes DLA Habil., professorConsultant at companyDr. Tams Valent, Polytrade CE



51/67

51


52/67



53/67

53

Kele Sra


54/67

BICO is a comprehensive urban bike-sharingsystem, based on the idea of community. Thismodular system can be adapted gradually to thedifferent needs of various cities, and different ur-ban terrains. Interactions - from user interfacesto bike docking - were designed in a simple, un-ambiguous, and easily accessible way, for both

the users and the actuator. Sustainability andfeasibility were dominating factors all throughthe design process - from low-tech productionsolutions to the controlled inclusion of adver-tising surfaces. With additional services andproducts BICO can grow into a major communalbrand interwoven into more than one layer ofurban life.

A BICO a kzssg fogalmra pl, teljes krvrosi-utcai kerkprklcsnz rendszer. Emodulris rendszer tbb szinten adaptlhat azegyes vrosok ignyeihez, illetve vrosokon belliklnfle terepekhez. Az interakcik a kom-munikcis felletektl a kerkpr dokkolsig

mind a mkdtet, mind a felhasznl szmra

egyrtelmek, gyorsak s knnyen kezelhetek.A fenntarthatsg s megvalsthatsg ignyenem csupn a low tech gyrtsi megoldsokban,hanem pldul az elre kialaktott s szablyozottreklmfelletekben is megmutatkozik. Kiegszttrgyak s szolgltatsok hozzadsval a BICOegy kerkprklcsnz rendszerbl a vrosilet sok terletn jelen lv, kzssgforml

mrkv bvlhet.

54

Kzssgi kerkpr vrosi kerkprklcsnz rendszerEgyetemi konzulensDr. Mth Katalin, egyetemi adjunktusJoanovics Lszl, egyetemi tanrsegdKls konzulensKukorelli Pter Orlai Balzs, Kolbszblkertst! stdi

Community bicycle urban bike-sharing systemTutorKatalin Mth PhD., assistant professorLszl Joanovics, assistant lecturerConsultant at companyPter Kukorelli Balzs Orlai, Kolbszblkertst! studio



55/67

55

Maszkly Andrea


56/67

The aim of my thesis was to design a set of furni-

ture for kindergarten, which makes monotonousday nursery environment more diverse due to itsmobile pieces, inspires children to spend theirtime more creatively and, as a result of its con-guration, eases the life of pedagogues. Piecesof MANO furniture give nursery-school childrengreat freedom in forming the required space forplaying on their own. The pieces of furniture are

capable of following the constant movement ofthe children, thus enabling the different playingprocesses to be linked more easily and makingthe utilization of the playing area more efcient.Mobile childrens houses may be adjusted to thenumber of playing children, encouraging mutualgames which constitute the basics of socialisa-tion. Because of their ergonomic form MANO

nursery chairs are suitable for children at allages from three to six.

Szakdolgozatom clja egy olyan vodai

berendezs megtervezse volt, mely mobilbtorai segtsgvel vltozatosabb teszi azamgy egyhang vodai krnyezetet, kreatvidtltsre kszteti a gyerekeket s kialakt-suknak ksznheten megknnyti a nevelklett. A MANO btorok hatalmas szabadsgotnyjtanak az vodsoknak, segtve ket abban,hogy maguk alakthassk ki a jtkhoz szks-

ges terket. A gyerekek folyamatos mozgsta btorok is kpesek kvetni, gy knnyebbensszekapcsoldhatnak a klnbz jtk-folyamatok s jobban kihasznlhat a jtktr. Amobil kuckk az ott jtsz gyerekek ltszmhozigazthatk, gy segtve a kzs jtkot is, mely aszocializlds alapjt kpezi. A MANO vodaiszkek ergonomikus formjuknak ksznheten

egyarnt megfelelnek a hrom s a hat vesgyermekek szmra is.

56

vodai berendezs tervezseEgyetemi konzulensMischinger Gbor, laborvezet mrnkLelkes Pter DLA Habil., egyetemi tanrKls konzulensNagy Jnos, BRED Irodabtor Kft.

Designing a set of furniture for kindergartenTutorGbor Mischinger, laboratory managerPter Lelkes DLA Habil., professorConsultant at companyJnos Nagy, BRED Irodabtor Kft.



57/67

57

Pap Kinga


58/67

In my thesis I created a concept, that is - in spiteof the market being saturated brings along acompletely new solution in mechanism, shapeand visual experience as well. The fundamentalidea was a tap which is brought into motion by thepower of water an idea that is not yet presenton the market. In the focus of the motion there islens shape. The lens is split into two halves. Byusing rails, the upper half can slide forward ontop of the other, as more water ows out from thearced opening. The geometry was constructedin such a way, that it drives the uid allowingthe water to leave from the tap even in the closedstate, at the beginning of the motion. The tap cre-ates a one-of-a-kind visual experience, and themotion makes usage exciting.

Diplomamunkm sorn ltrehoztam egy olyantermket, amely a teltd piac ellenre egyteljesen j megolds mind mkds, mind formas ltvny szempontjbl. Az tlet a vzsugrerejvel mozgatott csaptelep, ami mg nemltezik a piacon. A mozgs kzpontjban a ktflbl ll lencseforma ll, aminek a fels rszeegy rug ellenben, snek segtsgvel el tudcsszni az als rszen, mikzben egyre tbb vz

folyik ki az ves nylson. Alatta a geometrit gyalaktottam ki, hogy megvezesse a folyadkot,gy mr zrt llapotban, a mozgs indulsnakpillanatban is ki tud mleni a vz. A csaptelepklnleges ltvnyt nyjt, s a nyitssal egy-bekttt mozgs izgalmass teszi a hasznlatot.

58

Innovatv csaptelep tervezseEgyetemi konzulensVarga Andrs, egyetemi tanrsegdKls konzulensPozsonyi Jzsef, Desidea Studio

Innovative tap designTutorAndrs Varga, assistant lecturerConsultant at companyJzsef Pozsonyi, Desidea Studio



59/67

59

Pete Dra


60/67

In private homes curved walls are used es-

pecially in living rooms, which is a hard taskfor an interior designer because there is no orinsufcient amount of proper furniture. The ele-ments of MODIVA furniture can be combined inmany different ways according to users wish. Itcan also be used as an interior space separa-tor. Maximum six (opened, semi-opened and/or closed) shelf units can be built upon each

other vertically and two neighboring shelf unitscan be skipped in a row. Frames allow rotationon the centerlines by axial ball bearings. Thecurve of the furniture can be xed by fasteningthose bearings. Most of the parts are made ofAlucobond. It is a lightweight material with asandwich structure, which consists of two 0,5mm thick aluminium layers on the sides and a

polyethylene core.

ves alaprajzot magnhzakban elssorban a

nappali szobkban alkalmaznak, ezek beb-torozsa nehz feladat a lakberendez szmra,hiszen alig akad a clnak megfelel btor. AMODIVA btor egysgei a felhasznl ltaltetszlegesen kombinlhatak, gy az modulrisfelpts, trelvlasztknt is alkalmazhat.Fggleges irnyban maximum hat (nyitott, flignyitott s/vagy zrt) polcelem pthet egymsra

s kt szomszdos polcelem hagyhat ki astruktrbl egy sorban. A vzszerkezet az axi-lis csapgyak segtsgvel szabad elfordulstenged a kzptengelyek krl. A btor ve ecsapgyak megszortsval xlhat. A legtbbalkatrsz Alucobondbl kszl. Ez egy knny,szendvicsszerkezet anyag, amely kt oldaln0,5 mm-es alumnium rtegekbl, kzpen pedig

egy polietiln magbl ll.

60

Felhasznl ltal tetszlegesen alakthat btortervezse ves falfelletekreEgyetemi konzulensVidovics Balzs, egyetemi tanrsegdKls konzulensPozsonyi Jzsef, Desidea Studio

Design of arbitrarily adjustable furniture forcurved wallsTutorBalzs Vidovics, assistant lecturerConsultant at companyJzsef Pozsonyi, Desidea Studio



61/67

61

Robk Rka


62/67

In my diploma thesis I redesigned the suspen-sion of the Traxxas Slayer radio controlledmodel car using the reverse engineering meth-od. By the aspect of failures I dened the mostcritical elements of the suspension with the aidof FMEA analysis (suspension arms). In the nextstep I digitized the physical model of the originalSlayer suspension arms with a 3D Scanner, and

transformed the result (a spatial pointcloud) tosolid bodies. In order to improve the mechani-cal strength of the suspension arms I optimizedthe geometry. Before manufacturing the partsI tested them with a computer load simulation.The prototypes of the suspension arms wererealized by Polyjet rapid prototyping technology.The components were made of carbon bercomposit by small series manufacturing (siliconmould and vacuum casting).

Diplommban a Traxxas Slayer rdi tvi-rnyts modellaut kerkfelfggeszts-nek ttervezsvel foglalkoztam a reverseengineering mdszernek alkalmazsval. Azelvgzett FMEA elemzs alapjn elmondhat,hogy a meghibsods szempontjbl legkri-tikusabb alkatrszek a lengkarok. Ezutnaz eredeti Slayer lengkarok meglv zikaimodelljt digitalizltam egy lzeres 3D szken-

ner segtsgvel, majd a szmtgpen kapotttrbeli pontfelht testmodell talaktottam. Alengkarok mechanikai szilrdsgnak javtsardekben optimalizltam a geometrit. Akialakult modelleket szmtgpes terhels szi-mulcival teszteltem. A lengkarok prototpustPolyjet technolgival valstottuk meg. A kisso-rozat gyrtssal (szilikon szerszmba trtnvkuumnts) ksztett lengkarok anyagasznszl erstses kompozit.

62

Rdi tvirnyts modellaut kritikusszerkezeti elemeinek feltrsa s ttervezseEgyetemi konzulensDr. Hork Pter, egyetemi docensKls konzulensParczi Annamria, R-Design Studio-Mrnkiroda Kft.

Redesign of critical constructional parts ofradio controlled model carTutorDr. Pter Hork, associate professor lecturerConsultant at companyAnnamria Parczi, R-Design Studio-Engineering Ofce Ltd.



63/67

63


64/67

Fggelk

Bocsi Szabolcs .............................................bocsi.szabolcs@gmail.com ............................................12Bta Istvn ....................................................botadesign@gmail.com .................................................46Bdy Andrs .................................................designevolution@worker.com ..........................................8Csire Gza ....................................................csigez@yahoo.com ..................................................16, 48Dkny Sra ................................................dekanysaci@freemail.hu ................................................52Eperjesi Tmea ............................................eperjesitimea@gmail.com ..............................................12Galambos Mt ...........................................mate.galambos@gmail.com ............................................6KapelnerAndrea [email protected] ....................................................12Kele Sra ......................................................info@sarakele.com ..................................................18, 50Kelemen Zsa [email protected] ........................................................14KirchmayerAndrea [email protected] ................................................26LatorZsolt .................................................... [email protected] .....................................................10Lvay Ariel .................................................... [email protected] .....................................................14Lrincz Dniel .............................................. [email protected] ........................................................20Maszkly Andrea [email protected] .............................................................54Mzl Lajos .................................................. [email protected] ..................................................8MolnrL. Pter............................................. [email protected] ..............................................28

fAppendix

.


65/67

65

Mondvai Diana.............................................diamondvai.md@gmail.com .............................................6Nagy Bernadett [email protected] .......................................................30Nagy Orsolya Viktria [email protected] ..........................................................32Nieto Ramn ................................................djramon@freemail.hu .....................................................34Pap Kinga ......................................................pap.kinga@gmail.com ...................................................56

Pete Dra ......................................................petedorah@yahoo.com ..................................................58Pohoriljk Adrn [email protected] ........................................................10Rebi Zsuzsanna ............................................ [email protected] ................................................36Robk Rka ..................................................robakreka@gmail.com ...................................................60Rzsa Mikls Barna ...................................... [email protected] .......................................22Sarodi Flra .................................................kissarodi@yahoo.com ....................................................14Szab Jzsef ................................................u3szabo@gmail.com .....................................................38Szkely Anett ...............................................anett.szekely@gmail.com ..............................................40Szikszai Gusztv [email protected] .......................................................8Vci Balzs ...................................................balazsnyikow@gmail.com ................................................6Vas Tnde .....................................................vastunde@gmail.com ....................................................42Wettstein Dorottya ...................................... [email protected] ..................................................44


66/67

Kszlt

Kiadja a BME Gp- s Termktervezs Tanszk.Felels szerkeszt: Dr. Hork Pter

Szerkeszti: Szegh Krisztina, Szlig Nikoletta, Vidovics Balzs

Graka: Molnr L. Pter

Intro logo: Bartos Mrton, Radnczi Andrs

Published by BME Department of Machine and Product Design

Editor in chief: Pter Hork PhD.

Editors: Krisztina Szegh, Nikoletta Szlig, Balzs Vidovics

Graphic design: L. Pter Molnr

Intro logo: Mrton Bartos, Andrs Radnczi

A kiadvnyt tmogattk:

Our sponsors:

kCredits.


67/67

betti_intro2009

Documents