best view in the world.docx
DESCRIPTION
Viewing of one fascinating locationTRANSCRIPT
ADDITIONAL WORKS REQUIRED BY TESTING &
COMMISSIONING PUNCH LIST
1. Outdoor Children’s Play Area
Equipment.
Safety padding to 2.1 meter high required
to the shade columns
Safety padding to 2.1 high required to the
swing columns.
2. Road Signage.
Speed hump sign in the bottom should have speed HUMP text written in
Arabic & English.
Upon entering all the
gates, Speed Limit Signs
to be fixed
Page 1 of 10
Upon entering all the gates Reverse Parking signs to be fixed.
3. Tennis Court (With Seating).
Page 2 of 10
Tennis court is in elevated position, slope protection to provide around the
area to avoid future erosion
Guard rail is required at the end
and at the back of seating.
Drain line to introduce a gully or clean out in between for easy cleaning or
unblocking drain block.
4. Decorative
fence of
outdoor children’s play
area.
Page 3 of 10
Provide additional gate
to be used as an
emergency exit and
must be labeled.
ADDITIONAL WORKS REQUIRED – MULTI-PURPOSE SPORTS HALL
5. Multi-Purpose Sports Hall.
Acoustic boards installed
on the walls to be tested if
it will absorbed sounds.
6. External.
Page 4 of 10
Emergency Gates to be leveled in Arabic & English Text.
7. Children’s Play equipment area.
Children’s Play equipment area should be leveled both English & Arabic Text.
8. Aluminum Gates.
Door to be labeled on both side as identification.
Page 5 of 10
Door to be leveled flammable or hazard in Arabic & English text.
9. Frameless Glass Panels, Glass Doors & Glass Window.
Door to be labeled on
both side as
identification
Door to be labeled on both side as identification
Page 6 of 10
Middle support required in between panels to avoid swinging or vibration if
somebody accidentally lean in
the windows.
Life Guard room Door to be labeled on both side as identification
D-180 Door to be labeled on both side as identification
Frameless Glass Swinging Door to be labeled on both side as identification
Reception Area Door to be labeled on both side as identification
Gymnasium Door to be labeled on both side as identification
Pyramid Area – Middle Support required in between panels to avoid swinging
or vibration if somebody accidentally lean in the windows.
Corner of the window
having sharp edge to be
protected
Page 7 of 10
ND-7 Door to be labeled on both side as identification
W-4A Middle support required in between panels to avoid swinging or
vibration if somebody accidentally lean in the windows.
W-3 & W-4 Middle support required in between panels to avoid swinging or
vibration if somebody accidentally lean in the windows.
D1 & D2 Door to be labeled on both side as identification
D1A & D2A Door to be labeled on both side as identification
D9 & D38 Door to be labeled on both side as identification
Fixed Window Middle support required in between panels to avoid swinging or
vibration if somebody accidentally lean in the windows.
East Entry Door to be labeled on both side as identification
Glass Cladding Corner of the cladding having sharp edge to be protected
East Entry 2 Door to be labeled on both side as identification
Glass Cladding spider supported panel Corner of the cladding having sharp
edge to be protected
Zone C Door to be labeled on both side as identification
ND-1 Door to be labeled on both side as identification
ND-1 Corridor 5 Door to be labeled on both side as identification
D-75 Door to be labeled on both side as identification
Middle support required in between panels to avoid swinging or vibration if
somebody accidentally lean in the windows.
D-80 Door to be labeled on both side as identification
Exit sign above the door shall conform Qatar civil defense QCDD Standard
D-308 & D-309 Door to be labeled on both side as identification
D-297 Door to be labeled on both side as identification
D-81 & D-82 Door to be labeled on both side as identification
D-88 Door to be labeled on both side as identification
D-95 Door to be labeled on both side as identification
D-213 Door to be labeled on both side as identification
D-355 Door to be labeled on both side as identification
Page 8 of 10
10. Folding Partition.
Multi-Purpose hall – The provision doors in the panel of folding partitions in
the Push side to be provided a push plate.
Banquet hall- The provision doors in the panel of folding partitions in the
Push side to be provided a push plate.
Restaurant Area - The provision doors in the panel of folding partitions in
the Push side to be provided a push plate.
Page 9 of 10