belt tear switch

1
CERT CERT EN ISO 9001 : 2000 Certificate : 04 100 9600 155 - E3 OPERATION / ACTUATION Location of Monitoring Units The Monitoring units are to be fixed in inclined position in the direction of the belt movement as shown. The unit is provided with two 5 metre long rope lengths. Appropriate length to be cut while fixing the rope in positions as shown. The splinters, resulting from tearing of the belt, will push out the cross connected sensing rope to actuate the switch. The potential free contacts of the switch are to be wired into appropriate warning / tripping circuit. The switch can be reset by operating the reset lever. Rope to be manually refixed in position while re-starting the belt operation. BELT TEAR SWITCH SW4321E22P To Detect Torn Belt Condition & Provide Tripping / Warning Command CONSTRUCTION A set consists of a) Pair of monitoring units with mounting frame. b) Pair of sensor ropes-each 5mtrs. long. c) Rope clamps - 08 Nos. d) Hooks 02 Nos. MONITORING UNITS Enclosure : Cast Aluminium Degree of Protection: IP65 Actuation : By splinters of the torn belt. Reset : Manual Contact Arrangement : 2 NO + 2 NC Contact Rating : 10 Amp. Res. @110/240 V AC 50 Hz 03/2010/1000 JAYASHREE ELECTRODEVICES PVT. LTD. Regd. Office : 101, Prabodhan Apartment, 64/9 Erandwane, Pune - 411 004. India Tel : +91 20 2543 7736. Fax : +91 20 2543 7253. E-mail :[email protected] Works : W1, F-2 Block, M.I.D.C. Pimpri, Pune - 411 018. India. Tel : +91 20 27472873, 30681323 Fax : +91 20 30681326 E-mail : [email protected] Web : www.jayashree-electrodevices.com AKASH GRAPHIC 2544 8775 Other Conveyor Safety Products Pull Cord Switch Heavy Duty Limit Switch Belt Sway Switch Zero Speed Switch Toggle Limit Switch Rotary Cam Limit Switch In our search for excellence there is no finishing line. We are committed to all round development with focus on JAYASHREE ELECTRODEVICES PVT.LTD. Quality Reliability Integrity Schematic Connection Diagram Right Hand Side Monitoring Unit-RH Left Hand Side Monitoring Unit-LH

Upload: mehdi227

Post on 08-Nov-2014

37 views

Category:

Documents


4 download

DESCRIPTION

Belt Tear Switch

TRANSCRIPT

Page 1: Belt Tear Switch

CERTCERTEN ISO 9001 : 2000

Certificate : 04 100 9600 155 - E3

OPERATION / ACTUATION

Location of Monitoring Units

The Monitoring units are to be fixed in inclined position in the direction of the belt movement as shown.

The unit is provided with two 5 metre long rope lengths.

Appropriate length to be cut while fixing the rope in positions as shown.

The splinters, resulting from tearing of the belt, will push out the cross connected sensing rope to actuate the switch.

The potential free contacts of the switch are to be wired into appropriate warning / tripping circuit.

The switch can be reset by operating the reset lever.

Rope to be manually refixed in position while re-starting the belt operation.

BELT TEAR SWITCHSW4321E22P

To Detect Torn Belt Condition& Provide Tripping / Warning Command

CONSTRUCTION

A set consists of

a) Pair of monitoring units with mounting frame.

b) Pair of sensor ropes-each 5mtrs. long.

c) Rope clamps - 08 Nos.

d) Hooks 02 Nos.

MONITORING UNITSEnclosure : Cast Aluminium

Degree of Protection: IP65

Actuation : By splinters of the torn belt.

Reset : Manual

Contact Arrangement : 2 NO + 2 NC

Contact Rating : 10 Amp. Res. @110/240 V AC 50 Hz

03/2010/1000

JAYASHREE ELECTRODEVICES PVT. LTD.

Regd. Office :101, Prabodhan Apartment, 64/9 Erandwane, Pune - 411 004. IndiaTel : +91 20 2543 7736. Fax : +91 20 2543 7253.E-mail :[email protected]

Works :W1, F-2 Block, M.I.D.C. Pimpri, Pune - 411 018. India.Tel : +91 20 27472873, 30681323 Fax : +91 20 30681326E-mail : [email protected]

Web : www.jayashree-electrodevices.com AK

AS

H G

RA

PH

IC 2

544

8775

Other Conveyor Safety ProductsPull Cord Switch

Heavy Duty Limit Switch

Belt Sway Switch

Zero Speed Switch

Toggle Limit Switch Rotary Cam Limit Switch

In our search

for excellence there is

no finishing line.

We are committed to all round

development with focus on

JAYASHREE ELECTRODEVICES PVT.LTD.

Quality Reliability Integrity

Schematic Connection Diagram

Right Hand Side Monitoring Unit-RHLeft Hand Side Monitoring Unit-LH