belt conveyor products - flexcodocumentlibrary.flexco.com/x4047_enau_3881_bcpintroguide_0425… ·...
TRANSCRIPT
Keep your line up and running.
belt conveyor products
2
SOLUTIONS FOR EVERY ISSUE ALONG THE BELT LINE
secondary cleaner
primary cleaner(Polyurethane Blades)
access door
impact bed
sKirt clamps
dynamic impact bed
adjustable idler
belt trainer
pulley lagging
plough
(Tungsten Carbide Blades)
coretech conveyor rollers
3
secondary cleaner
primary cleaner(Tungsten Carbide Blades)
belt trainer
Carrybackmaterial that sticks to the belt after it leaves the transfer point and continues falling off along the conveyor’s return side. to address carryback, we offer:
• BeltCleaners
• BeltPloughs
• CleanerBlades
BeltSlipoccurs when the head pulley is not adequately gripping the belt due to a loss of friction. to combat slippage, we offer:
• CeramicPulleyLagging
• RubberPulleyLagging
Mistrackingbelt drifts to one side or the other, resulting in material spillage, uneven belt wear, and possible system damage. to inhibit mistracking, we offer:
• BeltTrainers
• BeltPositioners
With over 100 years of experience in the belt conveyor industry, Flexco knows that keeping your line running smoothly is essential to the success of your operation. That’s why we’ve developed a comprehensive line of innovative belt conveyor products that address the key issues you face.
Spillagematerial that spills off the belt, typically at transfer and load points. to curb spillage, we offer:
• SkirtClamps
• ImpactBeds
• BeltPloughs
(Tungsten Carbide Blades)
coretech conveyor rollers
4
CleanerInnovations•Patented,FacetedBladeProfile—Thesebladescontinuallyrenewtheiredges,creatingmoreefficient cleaning
•Better-PerformingTungstenCarbideCleanerBlades—Afteryearsoftestingandresearch,we’vecreatedbladesthatlastlongerandwearmore evenly
•Heavy-DutySpringTensioningSystems—Animportantpartofourcleaningsystems,ourtensionersenableeasyvisual inspectionandmaintain proper tension
•”MaterialPath”Cleaning—Thisuniqueoptionletsyou match your cleaner width to your actual material path,reducingdifferentialblade wear
•LargerDiameterPoles—Ourpolesaredesigned to resist the powerful twisting forces caused by continuousbelt motion
BeltTrackingInnovations•Pivot-and-Tilttechnology—Specialsensorsdetect beltwander,thenguidethebeltbacktothecorrect path
ImpactBedInnovations•VelocityReductionTechnology™—Anexclusivefeatureofourimpactbeds,thistechnologydeadensimpact energy for less rebound and material degradation
•Slide-OutService™—Designedforfastandsafecompletebarchange-outs
LaggingInnovations•An80%-CeramicSolution––Wewerethefirstto
market with this option
• IncrediblyFastInstallation––Ourweld-onlaggingis 50%fastertoinstallthanotherlaggingproducts
Innovative Designs, Superior Engineering, Industry Expertise
THE FLExcO dIFFERENcE
Since1907,we’vebeendedicatedtoimprovingbeltperformanceandproductivity.That’smeantspendingalotoftimeinthefield,workingalongsidecustomersandlearningabouttheireverydaychallenges—first-hand.
Weusethathard-wonknowledgetodesignbeltconveyorproductsthatworkbetterandlastlonger.Infact,wepioneeredmanyof the advanced features that have since become industry standards.
5
BudgetSavings•Flexcocleanersandotherbeltconveyorproducts
increase the life of the belt by reducing wear from carryback,mistracking,andotherissues.Giventhecostofbelting,beingabletokeepyourbeltslongercan mean substantial savings.
•Ourproductsalsohelpreducewearonotherkeyconveyorcomponents,likerollers,pulleys,splices,and more. That saves you even more money.
•Bycuttingdownoncarryback,spillage,andotherbeltproblems,ourproductsalsoreducesafetyhazards.Andasyouknow,accidentscanbecostly––intermsoflostproductivityandpossiblefines.
LowerMaintenanceCosts•Becausetheyreducecarrybackandspillage,ourbeltconveyorproductscutdownontime-consumingcleanup.
•Whenyourbeltandotherimportantconveyorcomponentsareprotectedfromdamage,youcanspend less time making repairs and less money buyingreplacementcomponents.Infact,studiesshow that reducing carryback from 3 percent to 1percentcanresultina67percentreductioninmaintenance costs.
Consistent,EfficientPerformance•Unscheduledshutdownsformaintenanceorrepairsmeanseriousproductionlosses.Ourbeltconveyorproducts help you maximise uptime by correcting theissues––suchasmistrackingandcarryback–– that typically cause system damage.
GreaterSafety•Studiesshowthatapproximately42percentof conveyor-relatedaccidentsoccurduringmaintenanceactivities.Ourcleanersandotherbeltconveyorproducts minimise the need for maintenance and reduce the risk of accidents.
Serviceability•Properservicingofproducts,suchasbeltcleanersandimpactbeds,iskeytoensuringeffectiveandlong-lastingperformance.That’swhyallFlexcoproducts are designed with features that make regular servicing easy.
•Wearecontinuallyenhancingouralreadyservice-friendlyproducts,makingthemeveneasiertomaintain.Forexample,we’veaddedaneasy-to-replacebladecartridgetoourMHSHeavy-DutySecondaryCleaner,andSlide-OutService™ bars to ourDRX™ImpactBeds.
Flexco Belt Conveyor Products Deliver Benefits for Your Belt—And Your Bottom Line
Mineline® – When “standard” products just won’t do.Flexco Mineline® products have been designed and engineered to work—day in and day out—in some of the toughest applications in the world. Regardless of the application, whether it be underground coal mining, port loading facilities, or other heavy tonnage applications that test the strength and durability of your conveyor system, Mineline is the answer. Customers have come to expect a Flexco cleaner, impact bed or tracker with the Mineline brand by its name to excel—even in situations where other products have failed. Next to Mineline endorsed products, you’ll find this mark:
6
YOUR ISSUE: cARRYBAckOUR SOLUTION: AdVANcEd cLEANING SYSTEmS
BELTCLEanERS
PrimaryCleaners• Mountedtotheheadpulleyandbelowthe
material flow• Idealforremovinglargepiecesofmaterial—
typically about 60–70 percent of initial carryback• Bladewidth/materialpathoptions
Secondarycleaners•Locatedjustpastwherethebeltleavestheheadpulley—andanywhereelsedownthebeltline
• Especiallygoodatremovingfines,increasingcleaningefficiencyto90+percent
BLadEoPTIonS
Polyurethane• Easieronthebelt• Workswellwithmechanicalsplices• Economical• Specialtyformulationsforhighheat,
chemical resistance, or water removal
Tungstencarbide:• Superiorcleaningefficiency• Longwear
step 1 UnderstandYouroptions
step 2 10KeyCriteriaforanalysingYourConveyor System
step 3 determineWhetherYouneeda CompleteSolution
1 your belt speed and belt width* 2 What types of splices are present and
their condition* 3 any unusual characteristics of your load or
environment (extreme heat, abrasiveness, mud, etc.)—aspecialtycleanerthatcanwithstandtheseconditions may be necessary*
4 Whether the belt reverses 5 your conveyor structure width 6 Yourpulleydiameter—typically,thelargerthe
pulley, the larger the required cleaner
7 Yourpulleycondition—ifthepulleyiswornor not perfectly round, a segmented blade may clean more effectively
8 Where you plan to position the cleaner and how much room there is to accommodate it
9 Thematerial’spathonthebelt—matchingthecleaner to the material path reduces differential blade wear
10 your desired level of performance and upkeep
* Note: CEMA has created an application classification guide that addresses these three criteria. Further explanation of this is found on Page 7.
some operators want their belts as clean as possible; others are comfortable with a certain amount of renegade material.
Toachievemaximumcleaningefficiency,it’sbestto bring together a primary cleaner and one or more
secondary cleaners to form a comprehensive system. if you only want to install a single cleaner, try to target the area—suchastheheadpulley—whereitwillhavethegreatest effect.
7
CEMA(ConveyorEquipmentManufacturersAssociation)publishes a guide with the explicit goal of providing "a uniform method for determining the application class of any individual belt cleaner." This is meant as a way to assist in the selection of the correct belt cleaner or belt cleaner system.Thecompleteguide,titled"ClassificationofapplicationsforBulkMaterialConveyorBeltCleaning," orCEMAStandard576,isavailablefromCEMA.
Theclassificationisbuiltonapointssystembasedonfivekeycriteria.WhileothersplayaroleasnotedonPage6,thesefivewerechosenasthekeyelementsinselectingtheappropriatecleanerorcleaningsystem.Thefivecriteriaare:
1. beltwidth 2. beltspeed 3. splicetype 4. materialabrasiveness 5. materialstickiness/moisturecontent
Each of these criteria score points; points increase based ontheimpactitwouldhaveontherequiredcleaner.Widerbeltwidths,fasterbeltspeeds,introductionofmechanicalsplices,increaseinmaterialabrasiveness(usingCEMAStandard550),andincreasingthemoisturecontentofthe material all add to the point totals when scoring an application.
Theresultsofscoringtheapplicationcreatedfiveclasses:
Inaccordancewiththisclassification,youwillfindclassratings for Flexco's belt cleaners throughout this guide as another resource to assist you in choosing the correct cleaningsystemforyourapplication,whilekeepinginmindthefullcriteriafoundonPage6.Formoredetailedinfooneachcleaner,logontowww.flexco.com.au.
Score Class
<6 1
7-10 2
11-15 3
16-23 4
>24 5
AppL IcATION cLASSIF IcATION GUIdE
Shown:H-TypeV-TipPrimaryCleaner
Shown:MHSHDSecondaryCleaner
Shown:U-TypeSecondaryCleaner
8
EZP1 Primary Cleaner• Standard-duty,with60mm(23/8") diameter pole• Visualtensioncheck• Requiresjust100mm(4")ofhorizontalclearance• Do-it-yourselfinstallationandminimalmaintenance
Maximum Belt Speed*: 3.5 m/sec (700 fpm)Pulley Diameter from 250–900 mm (10"–36")Applications: Aggregate, Sand & Gravel, Cement, Wood Processing, RecyclingCEMA Class 3
EZP-LS “Limited Space” Primary Cleaner• Compactdesignwithshorterpolelength• Standard-duty,solid-bladedesign• Visualtensioncheck• Do-it-yourselfinstallationandminimalmaintenance
Maximum Belt Speed*: 2.5 m/sec (500 fpm)Pulley Diameter from 150–550 mm (6"–22") Applications: Brick/Block Plants, Ready Mix Plants, Road/Mobile EquipmentCEMA Class 2
*Also available in Stainless Steel
EZP-LS Stainless Steel Food Grade Primary Cleaner• Stainlesssteelcomponentsforsuperiorcorrosionresistance• Standard-duty,solid-bladedesign• Visualtensioncheck• Whitefood-grade,chemical-resistantConShear™ blade
Maximum Belt Speed*: 2.5 m/sec (500 fpm)Pulley Diameter from 150–550 mm (6"–22") Applications: Fermentation Byproducts, Pre-processed FoodsCEMA Class 2
EZP-LS High-Temp Primary Cleaner• Compactdesignwithshorterpolelength• Standard-duty,solid-bladedesignratedupto135°C(275°F)• Canhandletemperaturespikesto163°C(325°F)• Visualtensioncheck• Do-it-yourselfinstallationandminimalmaintenance
Maximum Belt Speed*: 2.5 m/sec (500 fpm)Pulley Diameter from 150–550 mm (6"–22")Applications: Coke, Clinker, Cement, AsphaltCEMA Class 2
*Also available in Stainless Steel
Flexco primary cleanersFeatures & applications
cleaner Key: WET STIckY dRY HIGH TEmpERATURE cORROSIVE
9
To learn more about Flexco primary cleaners, visit www.flexco.com.au.
EZP1 Primary Cleaner with White ConShear™ Blade• Standard-duty,with60mm(23/8") diameter pole• Visualtensioncheck• Requiresjust100mm4"()ofhorizontalclearance• Do-it-yourselfinstallationandminimalmaintenance• Whitefood-grade,chemical-resistantConShearblade
Maximum Belt Speed*: 3.5 m/sec (700 fpm)
Pulley Diameter from 50–900 mm (10"–36")Applications: Fermentation Byproducts, Pre-processed FoodsCEMA Class 3
*Also available in Stainless Steel
EZP1 High-Temp Primary Cleaner• Standard-duty,solid-bladedesignratedupto135°C(275°F)• Canhandletemperaturespikesto163°C(325°F)• Visualtensioncheck• Requiresjust100mm(4")ofhorizontalclearance• Do-it-yourselfinstallationandminimalmaintenance
Maximum Belt Speed*: 3.5 m/sec (700 fpm)Pulley Diameter from 250–900 mm (10"–36")Applications: Coke, Clinker, Cement, AsphaltCEMA Class 3
*Also available in Stainless Steel
EZP1 Twist Tensioner Primary Cleaner• Standard-duty,solid-bladedesign• Compacttorsiontwisttensionerallowsformeasurable
andverifiabletension• Tensionercompatibletomountoneitherendofpole• Do-it-yourselfinstallationandminimalmaintenance
Maximum Belt Speed*: 3.5 m/sec (700 fpm)Pulley Diameter from 150–900 mm (10"–36")Applications: Aggregate, Sand & Gravel, Cement, Wood Processing, RecyclingCEMA Class 3
EZP1 Stainless Steel Food Grade Primary Cleaner• Stainlesssteelcomponentsforsuperiorcorrosionresistance• Standard-duty,solid-bladedesign• Visualtensioncheck• Whitefood-grade,chemical-resistantConShear™ blade
Maximum Belt Speed*: 3.5 m/sec (700 fpm)Pulley Diameter from 1250–900 mm (10"–36")Applications: Fermentation Byproducts, Pre-processed FoodsCEMA Class 3
F l e x c o p r i m a r y c l e a n e r s Continued
10
F l e x c o p r i m a r y c l e a n e r s Continued
Stainless Steel MMP Medium-Duty Primary Cleaner• Stainlesssteelcomponentsforsuperiorcorrosionresistance• Medium-dutyminingprimarycleaner• Heavy-duty,3-piecedesign,corrosion-resistantpole
with dual tensioners• Visualtensioncheck
Maximum Belt Speed*: 5.0 m/sec (1000 fpm)Pulley Diameter from 400–1200 mm (16"–48")
Applications: Phosphate, Potash, Copper/Gold Mining, Salt, Load-out Facilities Near Salt WaterCEMA Class 4
MMP Medium Mine-Duty Primary Cleaner• Medium-dutyminingprimarycleanerwithTuffShear™ blade• Heavy-duty,3-piecedesignpolewithdualtensioners• Visualtensioncheck
Maximum Belt Speed*: 5.0 m/sec (1000 fpm)Pulley Diameter from 400–1200 mm (16"–48")Applications: Underground Mining, Hard Rock Mining, Steel Mills, Iron Ore, Metal Mining, Aggregate, Coal Fired Power Plants, Load-out FacilitiesCEMA Class 4
Optional PATTensioner
Optional PATTensioner
cleaner Key: WET STIckY dRY HIGH TEmpERATURE cORROSIVE
MHCP Heavy-Duty Cartridge Primary Cleaner• Oneofthemostruggedprimarycleanersavailable• Engineeredforabusiveconditions• Telescoping,3-piecepolethatresiststwisting/bowing/bending• Quick-changeSuperShear™ bladecartridgeforfast,
easy maintenance
Maximum Belt Speed*: 7.5 m/sec (1500 fpm)Pulley Diameter from 500–1200 mm(20"–48" ) Applications: Underground Mining, Hard Rock Mining, Metal Mining, Longwall Coal Mining, Steel Mills, Iron OreCEMA Class 5
*Also available in Stainless Steel with FRAS-Approved Blades
PAT Portable Air Tensioner• PATensuresconstanttensionforfullblade
life with little maintenance• WorkswithFlexcomechanicalfasteners• Usablewithair,nitrogenorwater• Offerssingleordualtank(fortwocleaners)
when site air is not available• FeaturedonMineline®-approvedcleanerslike
MMP,MHCPandMHS
11
H-Type® HXF2 Primary Cleaner• Suitableasastand-alonecleanerinstandardandmediumduty
applications • Availablewithpolyurethane
Maximum Belt Speed*: 5.0 m/sec (1000 fpm)Pulley Diameter from 250– 325 mm10" – 53" (10" – 53" ) Applications: Underground Mining, Hard Rock Mining, Metal Mining, AggregateCEMA Class 4
H-Type® HV/HVP Primary Cleaner• Tungstencarbidetipprovidessuperiorcleaningefficiency
(vulcanizedbeltsonly)• Segmentedbladesworkindependently• Visualtensioncheck
Maximum Belt Speed*: 7.5 m/sec (1500 fpm)Pulley Diameter from 250–1575 mm(10"–63" ) Applications: Power Plants, Port Facilities, Hard Rock Mining, Iron Ore, Steel MillsCEMA Class 4
*Also available in Stainless Steel
H-Type® Heavy-Duty Primary Cleaner withEnhanced Service Advantage Cartridge• Segmentedbladesmountedonindividual,pre-tensionedcushions
maintaincleaningefficiency,evenasthebladeswear• Serviceadvantagecartridgefeatureallowsforeasyserviceand
inspection• AvailableinPowderCoatedorStainlessSteel• Compressionspringtensionermaintainsuniform,constantblade
tension to belt• High-gradetungstencarbidetips,alsoavailableinextra-lifetip
length
Maximum Belt Speed*: 6.0 m/sec (1200 fpm)Pulley Diameter from 600–3000 mm(24"–120" ) Applications: Power Plants, Port Facilities, Hard Rock Mining, Iron Ore, Steel MillsCEMA Class 4
*Also available in Stainless Steel
Applications listed are intended to identify where each cleaner is commonly and most effectively utilised. Belt conditions, belt speeds, and pulley diameters should all be considered before making a final product selection.Consult Flexco to assess specific applications and recommendations.
Optional HV Protected Tips
To learn more about Flexco primary cleaners, visit www.flexco.com.au.
F l e x c o p r i m a r y c l e a n e r s Continued
12
To learn more about Flexco secondary cleaners, visit www.flexco.com.au.
Y-Type Secondary Cleaner–Polyurethane• Availableinstandardduty(beltwidths450-1200mm(18"-48")
andheavyduty(beltwidths900-1800mm(36"-72")• Segmentedtipseasilyservicedutilizingaremovablecartridge• Springtensionedtodeliveroptimalcleaningperformanceand blade life• Foodgrade/chemicalresistantpolyurethaneoptionavailable• Compatiblewithreversingbelts• AlsoavailablewithBoltTensioner
Maximum Belt Speed*: SD 3 m/sec (600 fpm); HD 3.75 m/sec (750 fpm)Applications: Aggregate, Sand & Gravel, CementCEMA Class 2 (Y-Type Standard-Duty Polyurethane)
CEMA Class 3 (Y-Type Heavy-Duty Polyurethane)
Y-Type Secondary Cleaner–Tungsten Carbide• Availableinstandardduty(beltwidths450-1200mm(18"-48")
andheavyduty(beltwidths900-1800mm(36"-72")• Segmentedtungstencarbidebladescompatiblewith
mechanicalfastenerapplicationsareeasilyservicedutilizingaremovable cartridge
• Springtensionedtodeliveroptimalcleaningperformanceand blade life• Compatiblewithreversingbelts• AlsoavailablewithBoltTensioner
Maximum Belt Speed*: SD 3 m/sec (600 fpm); HD 3.75 m/sec (750 fpm)Applications: Aggregate, Sand & Gravel, Cement, MiningCEMA Class 3
Flexco secondary cleanersFeatures & applications
SD BladeSD Blade HD BladeHD Blade
Y-Type Secondary Cleaners with optional Bolt Tensioners
13
P-Type® Secondary Cleaner• AvailablewithC-tipsformechanicalfastenerapplications
orV-tipsforvulcanizedapplications• Segmented,tungstencarbideblades• Bolt-uptensioningsystem• Limitedspacemodeloptionfortelescoping,stacking,
or portable conveyors
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Aggregate, Sand & Gravel, Cement, Wood Processing, Recycling, Light Mining, Power Plants with Vulcanized BeltsCEMA Class 4*Also available in Stainless Steel
R-Type® Reversing Secondary Cleaner• AvailablewithC-tipsformechanicalfastenerapplications
orV-tipsforvulcanizedapplications• Two-waycushionsthataccommodatereversingbelts• Do-it-yourselfinstallation• Bolt-uptensioningsystem
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Aggregate, Sand & Gravel, Cement, Wood Processing, Recycling, Light Mining, Power Plants with Vulcanized BeltsCEMA Class 4*Also available in Stainless Steel
P-Type® Cartridge Secondary Cleaner• AvailablewithC-tipsformechanicalfastenerapplications
orV-tipsforvulcanizedapplications• Bolt-uptensioningsystem• ServiceAdvantageCartridgefeatureallowsfor
easy service and inspection
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Aggregate, Sand & Gravel, Cement, Wood Processing, Recycling, Light Mining, Ideal for Power Plants with Vulcanized BeltsCEMA Class 4*Also available in Stainless Steel
R-Type® Cartridge Secondary Cleaner• AvailablewithC-tipsformechanicalfastenerapplications
orV-tipsforvulcanizedapplications• Two-waycushionsthataccommodatereversingbelts• Bolt-uptensioningsystem• ServiceAdvantageCartridgefeatureallowsforeasyservice
and inspection
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Aggregate, Sand & Gravel, Cement, Wood Processing, Recycling, Light Mining, Ideal for Power Plants with Vulcanized BeltsCEMA Class 4*Also available in Stainless Steel
F l e x c o s e c o n D a r y c l e a n e r s Continued
cleaner Key: WET STIckY dRY HIGH TEmpERATURE cORROSIVE
MHS Heavy-Duty and Reversing Secondary Cleaner• Segmentedbladeswithchoicesoftungstencarbidetips• PatentedPowerFlex™ cushions that maintain optimal belt contact • Tensionersandcushioncreate4pointsofrelief,makingthe
cleanerfastener-friendly• Two-waycushionsavailableforreversingapplicationson
shuttleconveyors,conveyorsthatrollback,ortripperand stacker applications
Maximum Belt Speed: C-Tip: 6.0 m/sec (1200 fpm) V-Tip: 7.5 m/sec (1500 fpm)
Applications: Underground Mining, Hard Rock Mining, Metal Mining, Aggregate, Load-out Facilities, Iron Ore, Steel Mills, Power PlantsCEMA Class 5
Optional SAT2Tensioner
14
U-Type® Secondary Cleaner• U-shapedbladeandoffsetpolethatintensifycleaningpower• Bladetipsthatscrapeoffstubborncarryback,whilerubber
backers“squeegee”wetmaterial• Bestforcuppedbeltsandbeltswithworncenters• Choiceoftungstencarbide,impact-resistanttungsten
carbide,orpolyurethanebladetips• Worksbestinwetapplications• Bladereplacementmadeeasywithremovablefrontplate
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Cement, Coal Mining, Coal Prep Plants, Power Plants, Load-out FacilitiesCEMA Class 5
Stainless Steel U-Type® Secondary Cleaner• Stainlesssteelcomponentsforextracorrosionresistance• U-shapedbladeandoffsetpolethatintensifycleaningpower• Bladetipsthatscrapeoffstubborncarryback,whilerubber
backers“squeegee”wetmaterial• Bestforcuppedbeltsandbeltswithworncenters• Choiceoftungstencarbide,impact-resistanttungsten
carbide,orpolyurethanebladetips• Bladereplacementmadeeasywithremovablefrontplate
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Load-out Facilities, Power PlantsCEMA Class 5
Applications listed are intended to identify where each cleaner is commonly and most effectively utilised. Belt conditions, belt speeds, and pulley diameters should all be considered before making a final product selection.Consult Flexco to assess specific applications and recommendations.
F l e x c o s e c o n D a r y c l e a n e r s Continued
MHS Secondary Cleaner with Service Advantage Cartridge™
• Segmentedbladeswithchoicesoftungstencarbidetips• PatentedPowerFlex™ cushions maintain optimal belt contact • Tensionersandcushioncreate4pointsofrelief,makingthe
cleanerfastener-friendly• ServiceAdvantageCartridgefeatureallowsforeasyservice
and inspection
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Underground Mining, Hard Rock Mining, Metal Mining, Aggregate, Load-out Facilities, Iron Ore, Steel Mills, Power PlantsCEMA Class 5
*Also available in Stainless Steel
Stainless Steel MHS Heavy-Duty Secondary Cleaner• Stainlesssteelcomponentsforextracorrosionresistance• Segmentedbladeswithchoicesoftungstencarbidetips• PatentedPowerFlex™ cushions maintain optimal
belt contact • Tensionersandcushioncreate4pointsofrelief,makingthe
cleanerfastener-friendly
Maximum Belt Speed: C-Tip: 5.0 m/sec (1000 fpm) V-Tip: 6.0 m/sec (1200 fpm) Applications: Salt, Copper/Gold Mining, Phosphate, Potash, Load-out FacilitiesCEMA Class 5
cleaner Key: WET STIckY dRY HIGH TEmpERATURE cORROSIVE
15
FLExcO cLEANERS ANd FASTENERS: BETTER,TOGETHERmany of our cleaning systems have special features that allow them to interface seamlessly with our mechanical belt fasteners.
SPRInGTEnSIOnInGSySTEMADDS3rd POInTOFRELIEF
PATEnTEDPOWERFLEX™ CUSHIOnPROVIDES 2OFTHE4POInTSOFRELIEF,ALLOWInGFORSEAMLESSInTERFACEWITHFASTEnERS4thPOInTOFRELIEF
FOUnDInTHEPOLETORSIOnMOUnTInGSySTEM
Chevron Secondary Cleaner• Forraisedtop,chevron,orgroovedbelts• Hundredsofrubberfingersthatflickoffcarryback• Free-rotatingdesignthatworksonlywhenthebeltruns• Do-it-yourselfinstallationandquickdrumreplacement
Maximum Belt Speed: 2.5 m/sec (500 fpm)Applications: Wood Chipping, SandCEMA Class 3
Motorised Brush Cleaner• Uniquelypatternedbristlesaidinreducingmaterial buildup and clogging• Adjustabletensionersalloweasybrush-to-belt adjustmentasthebristleswear• Spinsoppositethebeltdirectionforoptimalcleaning• Do-it-yourselfinstallationandquickdrumreplacement
Maximum Belt Speed: 3.5 m/sec (700 fpm)Applications: Wood Chipping, SandCEMA Class 4
Shown: MHS Secondary Cleaner with Service Advantage Cartridge
F l e x c o s e c o n D a r y c l e a n e r s Continued
To learn more about Flexco secondary cleaners, visit www.flexco.com.au.
16
c-tip rv-tip uF blade
Primary Cleaner Options
Secondary Cleaner Options
application description
eZp-ls eZp1 eZp1 High temp mmp mHcp H-type®
(xF2 & xF) H-type®
(Hv & Hv2)High temp
v-tip
belt Width* 300 – 1500 mm 12" – 60"
300 – 1800 mm 12" – 72"
300 – 1800 mm 12" – 72"
600 – 2400 mm 24" – 96"
600 – 2400 mm 24" – 96"
450 – 1800 mm 18" – 72"
50 – 1800 mm 18" – 72"
450 – 1200 mm 18" – 48"
belt speed** <2.5 m/sec 500 fpm
<3.5 m/sec 700 fpm
<3.5 m/sec 700 fpm
<5.0 m/sec 1000 fpm
<6.0 m/sec 1200 fpm
<5.0 m/sec 1000 fpm
<7.5 m/sec 1500 fpm
<5.0 m/sec 1000 fpm
Head pulley diameter 150 – 550 mm 6" – 22"
250 – 900 mm 10" – 36"
250 – 900 mm 10" – 36"
400 – 1200 mm 16" – 48"
500 – 1200 mm 20" – 48"
250 – 1175 mm 10" – 47"
250 – 1675 mm 10" – 67"
200 – 875 mm 8" – 35"
temperature range -35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
up to 135°c (275°F) with spikes to 163°c (325°F)
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
up to 204°c (400°F) with spikes to 232°c (450°F)
blade conShear LS conShear conShear TuffShear SuperShear HxF, HxF2 HV HV
reversing belts Yes Yes Yes Yes Yes Yes Yes Yes
mechanical Fasteners Yes Yes Yes Yes Yes Yes No No
application description
mHs(v-tip)
p-type®
(c-tip) p-type(v-tip)
p-type ls(c-tip)
u-type®
(F-blade)u-type
(c-blade)u-type
(v-blade)
belt Width* 600 – 2400 mm 24" – 96"
450 – 1800 mm 18" – 72"
450 – 1800 mm 18" – 72"
450 – 1350 mm 18" – 54"
450 – 2100 mm 18" – 84"
450 – 2100 mm 18" – 84"
450 – 2100 mm 18" – 84"
belt speed** <7.5 m/sec 1500 fpm
<5.0 m/sec 1000 fpm
<6.0 m/sec 1200 fpm
<5.0 m/sec 1000 fpm
<5.0 m/sec 1000 fpm
<6.0 m/sec 1200 fpm
<7.5 m/sec 1500 fpm
temperature range -35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
-35 to 82°c -30 to 180°F
reversing belts Yes No No No No No No
Work with mechanicalFasteners No Yes No Yes Yes Yes No
application description
r-type®
(c-tip)r-type(v-tip)
y-type sd polyurethane
y-type Hdpolyurethane
y-type sd carbide
y-type Hdcarbide
chevron motorised brush cleaner
belt Width* 450 – 1800 mm 18" – 72"
450 – 1800 mm 18" – 72"
450 – 1200 mm 18" – 48"
900 – 1800 mm 36" – 72"
450 – 1200 mm 18" – 48"
900 – 1800 mm 36" – 72"
450 – 1500 mm 18" – 60"
450 – 2100 mm 18" – 84"
belt speed** <5.0 m/sec 1000 fpm
<6.0 m/sec 1200 fpm
<3.0 m/sec 600 fpm
<3.8 m/sec 750 fpm
<3.0 m/sec 600 fpm
<3.8 m/sec 750 fpm
<2.5 m/sec 500 fpm
<3.5 m/sec 700 fpm
temperature range --35 to 82°c -30 to 180°F
--35 to 82°c -30 to 180°F
---35 to 82°c -30 to 180°F
--35 to 82°c -30 to 180°F
--35 to 82°c -30 to 180°F
--35 to 82°c -30 to 180°F
--35 to 82°c -30 to 180°F
-29 to 82°c -20 to 180°F
reversing belts Yes Yes Yes Yes Yes Yes Yes No
Work with mechanicalFasteners Yes No Yes Yes Yes Yes Yes Yes
*Special sizes available upon request.**Belt speeds can be higher in vulcanized applications.
*Special sizes available upon request.**Belt speeds can be higher in vulcanized applications.
y-typepolyuretHane
y-typecarbide
Hv & Hv2HxF2
uc/uv blade
blaDe anD cleaner options
pv-tip
Hvp
cHevron
motorised brusH cleaner
consHear™ ls consHear™ HigH temp
consHear™ WHite
consHear™ standard
tuFFsHear™ megasHear™ supersHear™
17
Stabilising Rollers•Foruseinapplicationswithbeltcuporbeltflap•Bypreventingtheseissuessecondarycleaner
performance and blade/tip life is enhanced
Flexco belt cleaner accessories
Optional Mounting Bar Kitincl.8bolts,nutsandwashers•Formountingprimarycleanersonopenheadpulleys•Weldonbothsidesofpulleyandboltonsteelplates•ForusewithMSP,MMP,MHP,MHCP
SST Mounting Bracket Kit•ForMHSorMDWSsecondarycleanerinstallsrequiringadditionalmountingversatility
•Longmountingbracketkitalsoavailableforinstallationsthatrequireextralengthlegs
MST Mounting Bracket Kit•ForFMSsecondarycleanerinstallsrequiringadditionalmountingversatility
Optional Top Angle Kit•UsedwithbothStandardandLongSSTMountingBracketKits(belowleft) for additional mounting options
Spring Covers and Tensioner Locks (forPrimaryCleanersandSecondaries)•SpringCoversprotectspringandthreadedrodfrom
contamination and material buildup•TensionerLockpreventsunauthorizedcleanerretensioning
To learn more about Flexco belt cleaner accessories, visit www.flexco.com.au.
Water Spray Pole Kit• Stainlesssteelpolewithpowdercoatedsteelclampbrackets• Forusewithsecondarycleanersforanexceptionallycleanbelt• Typicalpressuresettingis276-414kPa(40-60psi)
Inspection Door•Lockabledesign•Availablein300mmx300mm,400mmx400mm,500mmx500mm,and600mmx600mm
•Grade316StainlessSteel•AlsoavailableinMildSteel
Mounting Plate Kitincl.2plates,400x800mm(16"x32")•ForusewithMountingBarstomount
cleaners on open head pulleys •ForusewithMSP,MMP,MHP,MHCP
YST Mounting Bracket Kit•Fory-Typesecondarycleanerinstallsrequiringadditionalmountingversatility
18
YOUR ISSUE: BELT mISTRAckINGOUR SOLUTION: BELT TRAINERS
• the belt is wandering to one or both sides
• the top or return side of the belt is affected
•the mistracking is happening consistently or occasionally
• the belt has a low, medium, or high running tension
Toselecttherightbelttrainer,youneedtoconsiderwhether:
Belt Positioner™
• Simplesolutionforbeltswanderingtoasingleside• Fixed,angledrollers“funnel”thebeltontothecorrectpath• Return-sideinstallationonly• Easytoinstallandmaintain
Maximum Belt Tension: Small, Medium and Large: 900 PIW Extra-Large: 1200 PIWBelt Dimensions: From 450–2400 mm (18 –96") wide
*Also available in Stainless Steel
Flexco belt trainersFeatures & applications
conveyor criteriabelt
positioner™ pt smart™ pt pro™ return side pt max™ pt max™
Heavy dutypt max™
super duty
top side mistracking No No No Yes Yes Yes
return side mistracking Yes Yes Yes Yes Yes Yes
reversing belts Yes No Yes No No No
belt mistracking to one side Excellent Excellent Excellent Excellent Excellent Excellent
belt mistracking to both sides poor Excellent Excellent Excellent Excellent Excellent
inconsistent tracking problem Good Excellent Excellent Excellent Excellent Excellent
belt is cupped (heavy) Good Good Good Excellent Excellent Excellent
belt has low running tension poor Excellent Good Good Good Good
belt has medium running tension Good Excellent Excellent Excellent Excellent Excellent
belt has high running tension Good Good Good Excellent Excellent Excellent
approx. “upstream” effect* 15 m (50') 6 m (20') 6 m (20') 6 m (20') 6 m (20') 6 m (20')
approx. “downstream” effect* 15 m (50')36 – 45 m
(120' – 150')30 m (100') 45 – 61 m
(150' – 200')45 – 61 m
(150' – 200')45 – 61 m
(150' – 200')
*Typical results; actual results may vary
Use the following chart to identify the best Flexco belt trainer for your needs.
19
To learn more about Flexco belt training systems, visit www.flexco.com.au.
PT Smart ™• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Economicalsolutionformedium-tensionbelts• Effectivelypreventsbeltfromdamagingstructure• Easytoinstall• Speciallydesignedtofitundergroundconveyors
Maximum Belt Tension: 1600 PIW Belt Dimensions: For belt width + 75 mm (3") roller and up to 25 mm (1") thick
PT Pro™ • Taperedrollsactivatethe"pivotandtilt"motiontotrackthebelt• Worksonsingledirectionorreversingbelts• Simplemountingbracketsforeasyinstallation,plusadjustment screwtofine-tuneforoptimalperformance• Idealforbeltswithedgedamage
Maximum Belt Tension: Standard Duty 1600 PIW Heavy Duty 1200–2400 PIWBelt Dimensions: Standard Duty 450–1800mm(18"–72" ) Heavy Duty 1200–2400mm (48"–96")
PT Max™ Return Side• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Idealsolutionforcuppedandhigh-tensionbelts• Performsinwetanddryconditions• Return-sideinstallationonly
Maximum Belt Tension: 3000 PIWBelt Dimensions: 600–1500 mm (24"–60") wide Up to 19 mm (3/4") thick
*Also available in Stainless Steel
PT Max™ Top Side• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Idealsolutionforcuppedandhigh-tensionbelts• Performsinwetanddryconditions• Top-sideinstallationonlyMaximum Belt Tension: 3000 PIWBelt Dimensions: 600–1500 mm (24"–60") wide Up to 19 mm (3/4") thick
*Also available in Stainless Steel
Heavy Duty PT Max™ Return Side• Idealforhightensionbelts• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Performsinwetanddryconditions• Return-sideinstallationonly
Maximum Belt Tension: 6000 PIWBelt Dimensions: 1200–2100 mm (48"–84") wide 19–25 mm (3/4" –1") thick
Super Duty PT Max™ Return Side• Forhighesttensionapplications• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Performsinwetanddryconditions• Return-sideinstallationonly
Maximum Belt Tension: 10,000 PIWBelt Dimensions: 1800–3000 mm (72"–120") wide 25 mm (1") thick and higher
Heavy Duty PT Max™ Top Side• Idealforhightensionbelts• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Performsinwetanddryconditions• Top-sideinstallationonly
Maximum Belt Tension: 6000 PIWelt Dimensions: 1200–2100 mm (48"–84") wide 19–25 mm (3/4" –1") thick
Super Duty PT Max™ Top Side• Forhighesttensionapplications• Sensorrollersdetectwander,then“pivotandtilt”
belt into place• Performsinwetanddryconditions• Top-sideinstallationonly
Maximum Belt Tension: 10,000 PIWBelt Dimensions: 1800–3000 mm (72"–120") wide 25 mm (1") thick and higher
F l e x c o b e l t t r a i n e r s Continued
20
YOUR ISSUE: LOAd-pOINT SpILLAGEOUR SOLUTION: ImpAcT BEdS, SLIdER BEdS, SkIRTING SYSTEmS, pLOUGHS & mORE
Protect Belt in Impact Area• just like the belt, impact beds see every kilogram of product.
careful consideration should be made to account for the worst-case impact your system may ever see.
• Findyourdropheightandmateriallumpweighttoselecttheproper bed. never pick a bed with a lower impact rating.
• Flexcooffersbedsfornumerousimpactratings: up to 25 kg-m (200 ft-lbs): eZsb-i, eZib-l, drX-200 25 to 100 kg-m (200 to 750 ft-lbs): eZib-m, drX-750 100 to 200 kg-m (750 to 1500 ft-lbs): drX-1500 200 to 400 kg-m (1500 - 3000 ft-lbs): drX-3000
Set Up an Appropriate Transition Distance• often compromised to save space, but short transition can lead to
premature belt, lagging, and idler wear or failure.
• UsingyouridlersorFlexcoadjustableidlers,followCEMArecommendations based on your trough angle, belt tension and belt carcass construction.
Divert Material to Avoid Damaging Tail Pulley or Belt• material trapped between the pulley and belt cancausesignificantdamagetoboth.
• Useaploughbeforethetailpulleytoremovematerial from the belt:
diagonal plough for one-side discharge v-plough for two-side discharge
21
When it comes to load zones, our impact beds deliver the highest level of material containment and belt protection. They’ve been specially designed to control acceleration, deaden impact energy, reduce damaging vibrations, and extend belt life.
Seal the Load Zone• Clampsandskirtingprovidethefinal—and very important—
assurance against spillage.
• Clampsshouldbedurableyeteasytousewhenskirtingneedsadjustmentorreplacement.
Track Belt in Load-Point• if belt is mistracking before the load zone
it will mistrack through the load zone, causing spillage.
• PreventmistrackingbyinstallingaBeltpositioner, pt smart™, or pt max™ before the tail pulley.
Support Belt as Material Settles• most conveyors feature an extended area where material settles after the impact area.
• Idlersoftenusedbutsealingwithidlersisdifficultduetobeltsag.Impactbedscanbeused to help with sealing but are expensive and cause belt drag.
• EZSB-Cprovidesthebestofboth:idlersincentertoreducedrag,andUHMWbarsontrough to provide constant sealing.
Ultimate Performance – Flexco Transfer Chute SolutionsWe have over 25 years of experience in designing and implementing superior transfer-point solutions. We offer:
• TasmanWarajayTechnology™ –– the original “controlled flow” solution• Greaterthroughputwithvirtuallynoplugging• Customengineeringtomeetyourneeds• Advanceddiversioncapabilities
22
Flexco impact bedsFeatures & applications
Flexco Slider Bed (EZSB-C)• UsesFlexcoCoreTech™ idlers in center section • Featuresadustabletroughframesforuseon20º,35ºor45º• Recommendedfornon-impactsealingareas• Availablewithshortleadtime
Bed Rating: No impactMaximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Sealing of extended load zone
Flexco Slider Impact Bed (EZSB-I)• UsesFlexcoCoreTechimpactidlersincentersection• Featuresadustabletroughframesforuseon20º,35ºor45º• Forlight-impactapplications• Recommendedfor-100to-150mm (-4"to-6") materials• Availablewithshortleadtime
Bed Rating: Up to 25 kg-m (200 lb-ft)Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Sand and Gravel
HowtoSelecttheRightImpactBedstep 1:
CalculateYourImpactEnergyIdentifytheweightofyourlargestlumpsizeandmultiply this number by your drop height. The result,expressedinlb-ft,willbeyourestimatedimpact energy.
step 2:
MatchtheResulttotheBedRatingnoImpact—EZSB-CUpto25kg-m(200lb-ft.)—DRX200,EZSB-I,EZIB-L25to100kg-m(200to750lb-ft.)—DRX750,EZIB-M100to200kg-m(750to1500lb-ft.)—DRX1500200to400kg-m(1500to3000lb-ft.)—DRX3000
material kg/m3
coke 657
Fertilizer 961
Bauxite, crushed 1281
potash 1281
coal, Bituminous, Solid 1346
coal, Anthracite, Solid 1506
Slag, Solid 2114
chromium Ore 2162
Halite (Salt), Solid 2323
phosphorus 2339
Stone (common, Generic) 2515
Limestone, Solid 2611
Shale, Solid 2675
Granite, Solid 2691
Gypsum, Solid 2787
Trap Rock, Solid 2883
dolomite, Solid 2899
malachite (copper Ore) 3860
platinum Ore 4293
Hematite (Iron Ore) 5158
Material Reference Table sample calculationGatherdataforyourImpactEnergyCalculation:Q: Whatsizematerialareyourunning?a: I’mrunning203mm(8")minuslimestone.
Q: Isthatthelargestpieceyou’veseenorcouldalargerpiecegetthroughthat203mm(8")crushersetting?
a: yes,that’sthecrushersetting;thelargestrockI’veseenis 203mmx406mmx406mm(8"x16"x16").
LumpWeight(W) LimestoneMaterialDensity=2611kg/m3 (163lb/ft3) Volume=200/1000x400/1000x400/1000=0.032m3
(8/12x16/12x16/12=1.185ft3) W=2611x0.032=83.5kg(163x1.185=193lb)
Q: What’sthefallheightfromthetopofthefeedingconveyortothereceivingbelt?
a: There’sa2mdropfromthefeedingconveyortoarockbox,thenanother2mdroptothereceivingbelt.
dropHeight(H) H=2m+2m=4m(H=5ft+4ft=9ft)
ImpactEnergyCalculation:LumpWeight(W)xdropHeight(H)=ImpactEnergy83.5kgx4m=334kg-m(193lbx9ft=1737lb-ft)ThisimpactscenariowouldrequireaDRX3000.
23
To learn more about Flexco load-point solutions, visit www.flexco.com.au.
DRX200 Impact Bed• ExclusiveVelocityReductionTechnology™ that deadens
rebound forces for reduced spillage and material degradation• Recommendedfor100–150mm(-4"to-6")materials• Slide-OutService™ for easy maintenance
Bed Rating: Up to 25kg-m (200 lb-ft)Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Sand and Gravel
DRX750 Impact Bed• ExclusiveVelocityReductionTechnology™ that deadens
rebound forces for reduced spillage and material degradation•Formedium-impactapplications•Recommendedfor200–250mm(-8"to-10")materials•Providesauniquesecondlevelofimpactrelief
Bed Rating: 25 to 100kg-m (200 to 750 lb-ft)Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Hard Rock Mining, Limestone Quarrying
DRX1500 Impact Bed• ExclusiveVelocityReductionTechnology™ that deadens rebound
forces for reduced spillage and material degradation•Forhigh-impactapplications•Recommendedfor-305mm(-12")materials•IsolationMountsensureasecondlevelofimpactforcereduction
Bed Rating: 100 to 200kg-m (750 to 1500 lb-ft) Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Coal-Fired Power Plants, Coal Prep Plants, Load-out Facilities
Flexco Standard-Duty Impact Bed (EZIB-L)• Featuresadustabletroughframesforuseon20º,35ºor45º• Recommendedforlight-impactapplications• Recommendedfor-100to-150mm(-4"to-6")materials• Availablewithshortleadtime
Bed Rating: Up to 25kg-m (200 lb-ft)Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Sand and Gravel
Flexco Medium-Duty Impact Bed (EZIB-M)• Featuresadustabletroughframesforuseon20º,35ºor45º• Formedium-impactapplications• Recommendedfor-203mmto-254mm(-8"to-10")materials• Availablewithshortleadtime
Bed Rating: 25 to 100kg-m (200 to 750 lb-ft)Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Hard Rock Mining, Limestone Quarrying
F l e x c o i m p a c t b e D s Continued
Applications listed are intended to identify where each impact bed is commonly and most effectively utilised. Material size, lump weight and drop height should all be considered before making a final product selection.Consult Flexco to assess specific applications and recommendations.
24
F l e x c o i m p a c t b e D s Continued
Adjustable Idler Frame• UsesFlexcoCoreTech™ idlers• Forusearoundloadzonetoliftbeltoffbeds• Featuresadjustabletroughframesin5ºincrements
Idler Rating: CoreTech roll - No impact CoreTech Impact roll - 25kg-m (200 ft-lb)
Applications: For use between every two Flexco beds, transitions
DRX3000 Impact Bed• ExclusiveVelocityReductionTechnology™ that deadens rebound forces
for reduced spillage and material degradation • Forextreme-impactapplicationsrequiringthehighestenergyabsorption• ImpactEnergyAbsorbersdisperseanimmenseamountofimpactenergy• Stationaryskirtsupportbarsystemhelpsensureapositiveseal
with the skirt rubber
Bed Rating: 200 to 400kg-m (1500 to 3000 lb-ft) Maximum Belt Speed: 5.0 m/sec (1000 fpm)Applications: Any operation that combines large material size and extreme height
Applications listed are intended to identify where each impact bed is commonly and most effectively utilised. Material size, lump weight and drop height should all be considered before making a final product selection.Consult Flexco to assess specific applications and recommendations.
25
YOUR ISSUE: ROLLER LIFE ANd WEIGHTOUR SOLUTION: cORETEcH™
NYLON ANd HdpE ROLLERSCoreTech™TacklesCommonIssuesLife. CoreTech™ rollers offer the best combination of structuralstrengthcoupledwiththerequirementsofmining,whichincludecorrosionresistance,abrasionresistance,andverylowsurfacefriction.
Corrosion.Whenmoisture,salt,orothercorrosivematerialsarepresent,CoreTechprovidesanexcellentalternative to steel rollers. CoreTech rollers provide the sameCEMAratingsassteelrollers,withnolossoffunctionalperformance,andmuchlongerlife.
Weight.CoreTechrollersareapproximately40percentlighterthanequivalentsteelrollsandastherollersgetlongerinthelargerdiametersteelrolls,thatweightreductiongetscloserto50percent.CoreTechrollers
requireonlyoneindividualtolift,carry,andplacetheroller,increasingproductivitywhilekeepingworkerssafe.
PowerConsumption. CoreTech rollers have lower runningfrictionvalues,which,dependingontheapplication,candecreasepowerbillsbyupto10percentayear.Lesspowerisusedduringstart-upandwhileinoperation,contributingtolowerelectricalconsumption.
noise. CoreTech rollers create far less noise than steel rollers. The estimated noise contribution of CoreTech rollersis+/-10dBbelowthenoisecontributionofmetalrollers. This noise variation can mean the difference between functioning below the maximum decibel levels and violating ordinances and compromising worker safety.
Rock Shield – The rock shield is pressed tight on the shaft and is stationary when the roller is in operation. This is the first line of defense and prevents larger material from damaging the seal.
Centrifugal Seal – The key to the CoreTech™ sealing arrangement, the centrifugal seal rotates with the roller and is specifically designed to create a vortex with forces up to 9X gravity. This action expels moisture and fines that may pass the rock shield.
Deep Groove Ball Bearing – A last line of defense, all CoreTech rollers use deep groove, factory lubricated and sealed for life ball bearings. The bearing selection ensures all CoreTech rollers meet the required application ratings and protect the bearings from premature failure due to corrosion or spalling.
Bearing Housing – The bearing housing is fused to the roller tube in a way that guarantees there is no path for moisture or dust to enter the roller.
Housing Guard– The smooth surface of the housing guard provides for optimal operation of the centrifugal seal.
Field-ProvenSealdesign
CoreTechHdPERolls – Highlyeffectiveworkhorsesforthedirtiest,mostabrasiveenvironments.Theyareidealforhighlycorrosive,acidicenvironments–including those with sulfuric acid.
CoreTechnylonRolls – The next generation of troughingandreturnrollsaremadeoflightweight,highstrength,corrosionandabrasionresistantcompositematerial.Plusbelt-friendlyconstructionmeans that even advanced wear on the shell won’t damage the belt.
F L E x c O ® c O R E T E c H ™ R O L L E R S
coretech roller available diameters max Face Width
nylon127, 152, 178mm
(5", 6", 7")2750mm
(108")
Hdpe127mm
(5")560mm
(22")
Specifications
Shown: CoreTech™ Nylon Roller
26
Flex-Seal ™ Skirting System• Dynamiccontainmentunitthatfullysealstheloadingzone• Sturdy,corrosion-resistantcomponentsthatdeliverlong
service life • Easytoinstallandmaintain
Module Sizes: 1200 mm (4') Skirting Sizes: For skirt rubber 150 mm (6") wide and from 8–19 mm (5/16"–3/4") thick
Flex-Lok™ Skirt Clamps• Heavy-dutyapplications• Strongrestrainingbarthatisheldinplacebyclampplatesto
alloweasyadjustmentofskirtrubber• Anti-vibrationclamppincanbeunlockedwitha
rubber hammer • Easytoinstallandmaintain• MiniFlex-Lok™optionavailable—overallheightof40mm (5½")
Module Sizes: 1800 mm (6') Skirting Sizes: For skirt rubber from 8–25 mm (5/16"–1") thick
PAL Paks• Safe,easy-to-installskirtclamps• Clamppinsboltorwelddirectlytoskirtboard• Bolt-onversionprovidesno-weldsolutiontoeliminate sparking risks• LimitedSpace(LS)optionavailable• Clampplatesare180mm/7"high(LSversion115mm/4½"high)
Skirting Sizes: For a range of skirt rubber heights; for thicknesses from 8–19 mm (5/16"–3/4") thick
RMC1 Skirt Clamps• Simpleinstallation,no-hasslemaintenance• Versatiledesignthatcanbeinstalledonverticalor
perpendicular skirt boards • Anti-vibrationclamppin• Interlockingclampplatesand1200mm(4')clampbar• LimitedSpace(LS)optionavailable
Module Sizes: 1200 mm (4')
Skirting Sizes: For a range of skirt rubber heights; for thicknesses from 8–19 mm (5/16"–3/4") thick
Speciallydesignedtocreateaneffectivesealatloadpointswithoutdamagingthetopcoverofyourbelt,ourskirtingsystemsareasmartwaytoimprovethroughput.
Simply tap loose the locking pin to reposition or replace skirt rubber
and then tap to re-lock in place.
F l e x c o s K i r t i n G s y s t e m s
LS Standard
2.5"65mm
4"100mm
7"180mm
4.5"115mm
Bolt-on PAL Pak Weld-on PAL Pak
27
F l e x c o s K i r t i n G s y s t e m s
To learn more about Flexco load-point solutions, visit www.flexco.com.au.
Diagonal Plough• Dischargesdebristoonesideofbelt• Uniqueangledbladethatcreateseffective“spiral”action• Fixedpositioneliminatesbouncingandvibrationproblems• Appropriateforuseatanypointalonginsideofreturnbelt• Simpleandquickinstallationandbladereplacement
Maximum belt speed: 3.5 m/sec (700 fpm)
Belt Widths: From 450–2100 mm (18"–84")
V-Plough• Simultaneouslydischargesdebristobothsidesofbelt• Angledbladedesign“spirals”awaydebrisandwater• Easytoinstallandmaintain• Fitsvirtuallyanyconveyorstructure• Turnbuckleatnoseallowsforfine-tuningatinstallation
Maximum belt speed: 5 m/sec (1000 fpm)
Belt Widths: From 450–2400 mm (18"–96")
Unique angled blade (on both Diagonal and V-Plough models) quickly spirals material off the belt, preventing it from working its way under the blade and providing a superior and more efficient cleaning.
HowtoSelecttheRightBeltPloughWhenchoosingaploughtopreventfugitivematerialfromfindingitswayintoyourtailpulley,youneedtoconsider where you want to discharge any debris.
Todischargematerialtoasinglesideofthebelt: ChoosetheRDP1DiagonalPlough.
Todischargematerialtobothsidesofthebelt: ChoosetheV-Plough.
Flexco offers two advanced ploughs that prevent costly damage to tail pulleysandgravitytake-ups,whilecleaningtheinsideofthebelt.
Flexco plougHsFeatures & applications
Twin Pole V-Plough• Cleanstheinside/cleansideofreturnbelt• Floatingdesignself-adjustsasbladewears• UHMWPEbladesprovidelong-lifeandeasychange-out
Belt Widths: From 900 – 3000 mm (35" – 118")
Heavy-Duty Floating Blade Plough• Eliminatesconveyordamageandbeltmistrackingcausedbydebrislodginginthetailpulleyortake-up
• Floatingbladeself-adjustsasbladeswear,eliminatingtheneedformanualadjustment
• Fail-safefixedframesoasthebladewears,theframewillnevertouch the belt
• Deflectingshieldspreventrocksanddebrisreboundingoverplough
• AvailableinstainlesssteelwithFRASapprovedbladesforuseinunderground environments
• Cleanstheinside/cleansideofthebelt
Belt Widths: From 900–2600 mm (36"–108")
28
YOUR ISSUE: SLIppAGEOUR SOLUTION: pULLEY LAGGINGHowtoSelecttheRightLaggingProductToselecttherightpulleylagging,besuretoconsidertheenvironmentalconditionsaroundthepulley:•Beltcondition,i.e.,wetordry•Theservicerequiredforbondedlaggingversusweld-on•Theexpectedwearlifeofthelagging
Flex-lag® rubber Flex-lag® ceramic Flex-lag® Weld-on™
criterialight duty plain diamond diamond
patternmedium ceramic Full ceramic rubber
diamond Full ceramic
total thickness* 6 mm(1/4")
10–25 mm(3/8"–1")
10–25 mm(3/8"–1")
12 mm(1/2")
15 mm(5/8")
12 mm(1/2")
14 mm(9/16")
15 mm(5/8")
belt Width* Any Width Any Width Any Width Any Width 450–2100 mm (18"–84")
450–2100 mm (18"–84")
450–1800 mm (18"–72")
450–1800 mm (18"–72")
minimum pulley diameter 50 mm (2") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 300 mm (12") 400 mm (16") 400 mm (16")
dry Friction Very Good Excellent Very Good Very Good Excellent Excellent Very Good Excellent
Wet Friction Average Average Good Very Good Excellent Excellent Good Excellent
Wet/muddy Friction - Average Average Good Very Good Very Good Average Very Good
Wear life Good Good Good Very Good Excellent Best Good Best
ease of installation Good Good Good Good Good Good Best Best
drainage grooves No Yes
Fras (Fire resistant anti-static) No Available
rubber compound SBR
Hardness (shore a) 68 +/- 3
ceramic compound - - - Al2O3 Al2O3 Al2O3 - Al2O3
ceramic coverage - - - 13% 39% 80% - 74%
operating temperature-15° – 85° c(5° – 185° F)
Flex-lag® rubber Flex-lag® ceramic Flex-lag® Weld-on™
criterialight duty plain diamond diamond
patternmedium ceramic Full ceramic rubber
diamond Full ceramic
pulley diameter
<500 mm(<20")
Ok10 mm
3/8"10 mm
3/8"12 mm
1/2"15 mm
5/8"12 mm
1/2"Ok Ok
500–800 mm(20"–32")
Non-drive Only10 mm–12 mm
3/8"–1/2"10 mm–12 mm
3/8"–1/2"12 mm
1/2"15 mm
5/8"12 mm
1/2"Ok Ok
800–1200 mm(32"–48")
- 12 mm–20 mm 1/2"–3/4"
12 mm–20 mm 1/2"–3/4"
12 mm–15 mm 1/2"–5/8"
15 mm 5/8"
2 mm–15 mm 1/2"–5/8"
Ok Ok
>1200 mm(>48")
- 15 mm–25 mm 5/8"–1"
15 mm–25 mm 5/8"–1"
15 mm–25 mm 5/8"–1"
15 mm–25 mm 5/8"–1"
15 mm–25 mm 5/8"–1"
Ok Ok
Fabric belts
low (<500 piW) Ok10 mm–12 mm
3/8"–1/2"10 mm–12 mm
3/8"–1/2"12 mm
1/2"15 mm
5/8"12 mm
1/2"Ok Ok
medium (500–1000 piW) Non-drive Only12 mm–15 mm
1/2"–5/8"12 mm–15 mm
1/2"–5/8"12 mm
1/2"15 mm
5/8"12 mm
1/2"Ok Ok
High (1000–2000 piW) - 15 mm–20 mm 5/8"–3/4"
15 mm–20 mm 5/8"–3/4"
15 mm–25 mm 5/8"–1"
15 mm–25 mm 5/8"–1"
15 mm–25 mm 5/8"–1"
- -
steel cord belts
medium (st500–st3150) - 12 mm–20 mm 1/2"–3/4"
12 mm–20 mm 1/2"–3/4"
12 mm–20 mm 1/2"–3/4"
15 mm–20 mm 5/8"–3/4"
12 mm–20 mm 1/2"–3/4"
- -
High (st3500–st5400) - 20 mm–30 mm 3/4"–1-1/4"
20 mm–30 mm 3/4"–1-1/4"
15 mm–30 mm 5/8"–1-1/4"
15 mm–30 mm 5/8"–1-1/4"
15 mm–30 mm 5/8"–1-1/4"
- -
Use the following chart to identify the best Flexco lagging for your needs.
*Additional thicknesses and widths available as special orders. For weld-on lagging, thickness includes the backing plate.
Red items available as specials.
29For proper quantities by pulley size, use the lagging calculator at www.flexco.com.au.
F l e x c o p U l l e y l a G G i n G
Light-Duty Rubber Lagging• Speciallydesignedforpulleyswithdiametersassmallas
50mm(2").• Moistureischanneledbetweensmallraisedbuttonsthat
support and grip the belt and deliver superior traction.• AvailableinSBRandWhitenitrileBelt Width: Any Width
Plain-Pattern Rubber Lagging• Helpspreventbeltslippageindryenvironments.• Provedslargersurfacecontactarearelativetootherpatterned
lagging.• Horizontalgrooveschannelwateranddebriswhileprovidingabetter
dynamic interaction with the belt compared to sheet lagging.
Belt Width: Any Width
Diamond-Pattern Rubber Lagging• Diamondpatternfeaturesabidirectionaldesignfor
superiorwater-sheddingcharacteristics.• Horizontalgroovesprovideasecondmethodtodisperse
water and debris off the lagging and prevent hydroplaning.• Performswellinbothdryandwetapplications.Belt Width: Any Width
Medium Ceramic Lagging (39% tile coverage)• Constructedfromindividualceramictilesmoldedintoa
high-durometerrubberforexcellentabrasionresistance.• Excellentperformanceindryorwetapplicationsandvery
good performance in muddy applications.• Moldedceramicbuttonsgripthebelt'sundersidefor
positive traction.• Excellentfrictionformid-rangetensionbelts.Belt Width: from 450–2100 mm (18"–84")
Weld-On Rubber Lagging• Weld-Ondesignallowsforquick,in-situinstallation.• Gear-toothlayoutprotectscleanersonpulleyfrom
experiencing "chatter" and premature wear.• Diamond-Patternfeaturesabidirectionaldesignfor
superiorwater-sheddingcharacteristics.• Performswellinbothdryandwetapplications.
Minimum Pulley Diameter: 16" (400 mm)Belt Width: from 18"–72" (450–1800 mm)
Diamond-Pattern Ceramic Lagging (13% tile coverage)• Largeceramictileismoldedintothediamondsection,providingan
increasedcoefficientoffrictionvs.Diamond-PatternRubber.• Alsofeaturesabidirectionaldesignforsuperiorwater-shedding
characteristics.• Usestheadvantagesofaceramicproductatamoreaffordablecost
in light or medium duty applications.Belt Width: Any Width
Full Ceramic Lagging (80% tile coverage)• Constructedfromhundredsofindividualceramictilesmoldedintoa
durablerubberbackingwithahighercoveragethanMediumCeramicforbest-in-classabrasionresistance.
• Mostconsistantperformanceindry,wetormuddyapplications.• Moldedceramicbuttonsgripthebelt'sundersideforpositivetraction.• Bestforhigh-tensionbelts.Belt Width: from 450–2100 mm (18"–84")
Weld-On Ceramic Lagging (74% tile coverage)• Weld-Ondesignallowsforquick,in-situinstallation.• Gear-toothlayoutprotectscleanersonpulleyfromexperiencing"chatter"
and premature wear.• Constructedfromhundredsofindividualceramictilesmoldedintoa
durable rubber backing.• Mostconsistantperformanceindry,wetormuddyapplications.• Moldedceramicbuttonsgripthebelt'sundersideforpositivetraction.
Minimum Pulley Diameter: 16" (400 mm)Belt Width: from 18"–72" (450–1800 mm)
30
F l e x c o p U l l e y l a G G i n G a D H e s i V e s
Adhesive and activator mix on a 1 can : 1 bottle ratio for simplified ordering, stocking
and preparation
Primer specifically paired with the adhesive for optimal bonding strength
Excellent Bonding Strength• Simpletoorder,easytouse• Environmentallyfriendly,freeofchlorofluorocarbons(CFC)• WorkswithallFlexcocold-bondlaggingproducts
Flex-Lag®Adhesivesareatwo-partcoldbondingsystemdesignedspecificallyforusewithrubber-to-rubberandrubber-to-metaladhesion.Flex-LagAdhesivesarealsoproducedwithoutusingchlorofluorocarbons(CFCs).Anexcellentbondis achieved while using the minimal amount of cement and primer thanks to high adhesion during installation and after curing.
each Flex-lag adhesive is mixed with one Flex-lag activator. refer to the usage chart below to calculate the number of cans required for your pulley. For sizes not included in the chart please contact Flexco customer service for assistance.
Usethefollowingchartstodeterminecorrectorderquantitiesforyourpulleysize.
ADHESIVE 0.8L / ACTIVATOR 40g (1 can : 1 bottle mix ratio) Face Width
mm 254 356 457 559 660 762 864 965 1067 1168 1270 1372 1473 1575 1676 1778 1880 1981 2083 2184 2286 in 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90
pulle
y d
iam
eter
203 8 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3305 12 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4406 16 1 1 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4 5 5 5508 20 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6610 24 1 2 2 2 2 3 3 3 4 4 4 5 5 5 5 6 6 6 7 7 7711 28 1 2 2 2 3 3 3 4 4 5 5 5 6 6 6 7 7 7 8 8 8813 32 2 2 2 3 3 4 4 4 5 5 6 6 6 7 7 8 8 8 9 9 10914 36 2 2 3 3 3 4 4 5 5 6 6 7 7 8 8 8 9 9 10 10 111016 40 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 121118 44 2 2 3 4 4 5 5 6 6 7 7 8 9 9 10 10 11 11 12 12 131219 48 2 3 3 4 4 5 6 6 7 7 8 9 9 10 10 11 12 12 13 13 141321 52 2 3 3 4 5 5 6 7 7 8 9 9 10 11 11 12 13 13 14 15 151422 56 2 3 4 4 5 6 6 7 8 9 9 10 11 11 12 13 14 14 15 16 161524 60 2 3 4 5 5 6 7 8 8 9 10 11 11 12 13 14 14 15 16 17 17
PRIMER .75L Face Width
mm 254 356 457 559 660 762 864 965 1067 1168 1270 1372 1473 1575 1676 1778 1880 1981 2083 2184 2286 in 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90
pulle
y d
iam
eter
203 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1305 12 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1406 16 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1508 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1610 24 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1711 28 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1813 32 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1914 36 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 21016 40 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 21118 44 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 21219 48 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 21321 52 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 21422 56 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 21524 60 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2
31
Inspection, Installation and MaintenanceAroundtheworld,Flexcohasyouroperationcovered.Whetheritbewithourfactory-trainedandcertifiedFlexcoresourcesorourtraineddistributorpartners, we're there to ensure you maximise the return on your investment by making sure Flexco's products areproperlyspecified,installed,ormaintained.
Ensuring the product is installed correctly and maintained is critical to provide the optimal results our products are engineered to deliver. Flexco takes pride in making sure you have access to the resources that make certain the products exceed your expectations.
TrainingFlexco offers training programs around theworldthatareflexibletomeetyourneedsandrequirements.Ourprogramsrange from coming to your site to train a maintenance team to hosting you at one of our Flexco training centers at10locationsaroundtheworld.OurcomprehensiveFlexcoUniversityprogram delivers the knowledge and skillsrequiredtoensureyoukeepyour belts running effectively and efficiently,balancingbothclassroomandfieldinstructiontodeliveradetailed,thorougheducationprogram.Weutiliseavarietyoftools,frommobile showrooms to demonstration conveyors to provide the most value.
Conveyor AssessmentsHavingathirdpartyreviewyourconveyorsystemcanprovetobeaneffectivewaytoidentifyperformance,maintenanceandsafetyconcernsthatcanbecriticaltominimising downtime and maximising your productivity.
Flexco's assessment program allows you to proactively address belt conveyor concerns before they lead to costly repairs and unscheduled downtime. Focusing on issuessuchasspillage,carryback,beltslippage,andmistracking,Flexcospecialistswillrecordtheirfindingsandreturntoyouroperationwithacompleterecommendationonthesystem,identifyingimmediateneedsandsuggestingfuturefixes.
FLExcO SERVIcES
32
visit our website or contact your local distributor to learn more.
Flexco (Aust.) Pty. Ltd • 10 Solent Circuit • Baulkham Hills NSW 2153 • Australia Tel: 612-8818-2000 • Fax: 612-8824-6333 • E-mail: [email protected]
Visit www.flexco.com for other Flexco locations and products.
©2016 Flexible Steel Lacing Company. 04/13/16. For reorder: x4047