bed double - fantastic furniture

Version 1.0

PARISBED DOUBLE

www.fantasticfurniture.com.au

14/04/2015

www.fantasticfurniture.com.au PAGE 2

Enjoy Your purchase from

Australia’s Best Value Furniture Store

Read through the instructions carefully before you begin.

Assembly checklist

Identify and lay out all of the components before you begin assembly.

Unless instructed, do not fully tighten screws until the item is fully assembled.

! Never use power tools unless specifically instructed. They can damage your components or hardware if used incorrectly.

! The most common mistakes made during assembly are using the wrong hardware or getting components back to front.

! Always use a soft surface (such as carpet or cardboard) when assembling your product to avoid scratching or damaging the surface of the product.

! Bulky items such as wardrobes and bunk beds should be assembled in the room they will be used in as they may not fit through a door once assembled.

! Never use any glue until you are certain that the parts belong together.

! Periodically check and re-tighten all fasteners. Check the product care label or website for product care instructions.

! If you are having any difficulties assembling your product, missing any hardware or components please visit our website Help Centre for further assistance.

Make sure you have all the required tools. Never use power tools unless instructed.

Useful Information

PAGE 3www.fantasticfurniture.com.au

What you needto assemble the product

Other tools you needFlat head screwdriver; Phillips headscrewdriver; Mallet


Parts listBox 1: HEAD BOARD(P1); FOOT BOARD(P2);2 X SUPPORT LEG(P6)Box 2: 2 X SIDE RAIL(P3); CENTER RAIL(P5);

P3

P7

P6

P4

P5

P3P4

P1

P2

6 x JCN NUTS M6 x 20MM (H2)

2 x PIPE CAPS (H4)

13 x CENTER SLAT STOPPERS (H5)

26 x SIDE SLAT STOPPERS (H6)

2 X SUPPORT RAIL(P4); SPRING SLAT(P7)

4 x FINIALS (H7)

16 x SCREWS M6 x 25MM (H3)

ALLEN KEY

4 x BOLT (H8)WITH CROSS HEAD

2 x ADJUSTABLE FOOTS (H1)

Step 1P1

P2P3

P3

H3

H3

P2/P1

P3

H2

P3P4

P4

P3 P4

P1/P2

8 x SCREW M6X25MM (H3)

PAGE 5

Step 2


You will need

ALLEN KEY

ALLEN KEY

4 x JCN NUTM6 X 20 MM(H2)

4 x SCREWM6 X 25 MM(H3)

You will need

14/04/2015

Attach the Side Rail (P3) to the Headboard (P1) and the Footboard (P2) by using8 x Screws (H3), don’t fully tighten screws until step 4.

Place the Support Rail (P4) to the Side Rail (P3) using JCN Nut M6 x 20MM (H2) and Screw M6 x 25MM(H3).

H3

Step 3

PAGE 6

Step 4

2 x JCN NUT M6X20MM(H2)

2 x SCREW M6X25MM(H3)

2 x PIPE CAPS (H4)

P5

P6


You will need

14/04/2015

Attach Adjustable foot (H9) to Support Leg (P6). Attach 2 Support Leg (P6) to Center Rail (P5) by using 2 x screws (H1).

H3

P6

P5

H1

ALLEN KEY

Fix in the Center Rail (P5) using JCN Nut M6 x 20MM (H2) and Screw M6 x 25MM (H3) before insert Pipe Cap (H4) into the end of the Center Rail (P5). Fully tighten all screws.

P5

2x ADJUSTABLE FOOTS (H1)

2 x SCREW M6X25MM(H3)

H2

H3H4

P5 P4

Step 5


14/04/2015

13 x CENTER SLAT STOPPER(H5)

26 x SIDE SLAT STOPPER(H6)

You will need

Push the 2 side Slat Stopper (H6) firmly onto 2 Spring Slats (Pfirmly together.

7), and then push a Center Slat Stopper (H5)

Place the slat into the side rails (P3) and Center Rail (P5) in position, then push down on the center of the slat to flatten out the slat, make sure the plastic prong lines up with the hole and then push firmly.Repeat the same process for all the slat.

P3 P5

Pushing downward to straighten

H6 H6H5

Step 6

PAGE 8

P1P2


14/04/2015

Attach 4 x Bolts (H8) to Headboard (P1) and Footboard (P2) post using Allen Key as per shown. Then attach 4 x Finials (H7) to Bolts.

4 x FINIAL (H7)

You will need

4 x BOLTS (H8)

P1/P2

H7

H8

Job Complete!In the interest of our environment please dispose

of all packaging thoughtfully

Short end face bottom

ALLEN KEY

bed double - fantastic furniture

Documents