BeamJacks

REDUDCE AIR GAPS FOR EFFICIENT WELDINGIncrease speed and efficiency with our Magswitch Adjustable Beam Jack Series. They are perfectly suited to pull ferrous steel flat against stiffener beams, eliminating air gaps to improve welding efficiency. Must have tool in shipyards and anywhere steel is used!

Learn more about Magswitch Beam Jacks at magswitch.com.au

+1 (303) 468.0662magswitch.com.au

cs@magswitch.com.au

• Removes air gaps between structural members (stiffeners) and their base material. • Works stronger on thinner materials. • Reduced welding time considerably and minimize the need for extra welding jigs.

• Patented shallow field technology offers the ability to weld closely to magnets without having a negative effect on the weld.• Lighter than other competitors. • Magnet turns completely OFF and stays clean.

3 Ton and 6 Ton Beam JacksLifters make contact with the base material and are turned on by simply actuating two handles. Once the magnets are actuated, the hydraulic jack can be pumped. This will reduce the air gap and allow for easy welding.

1.5 Ton Beam JackLifters make contact with the base material and are turned on by simply actuating two handles. Once the magnets are actuated, turn the ratcheting handle to apply pressure to the beam. This will reduce the air gap and allow for easy welding.

81001245 8800605

81001171

1.5 T Beam Jack 3 T Beam Jack 6 T Beam Jack

The Beam Jack Series

How It Works?

Coming Soon to Magswitch

* 6 Ton Beam Jack also available with Gimbal Accessory #8800770With both gimbals installed, the magnetic feet can conform to uneven surfaces by

swiveling 12° in either direction. Includes two gimbals and a ram extension.

Gimbal Kit*#8800770