b&d manufacuring

Helping industry succeed with every turn.

Equipment & Product Guide

Visit our web site: www.bdmfg.com2


He

av

y T

ru

ck

Ma

int

en

an

ce

Eq

uip

me

nt

Super JackWhen maintenance is required on your fleet, this sturdy and dependable device can lift and secure the largest haulage trucks in the world. For excellent stability when pulling tires and wheel groups from trucks, we offer three models: BD-SJ120, BD-SJ240, BD-SJ240-U This is the only certified two point lift Jacking System for the 300 to 400 ton trucks. The B&D Super Jack enables workers to perform the required maintenance to your vehicles in a secure and safe environment. Easy to operate requiring only one individual, the Super Jack can double as a safety stand while the work is being done on the truck and if you need to use it to lift other vehicles simply replace it with a pair of custom engineered B&D Safety Stands.The Super Jack is a fully computer controlled, hydraulically driven vehicle. It can sense the characteristics of the lift with a feedback screen that enables the operator to visually monitor the vehicle tonnage, tilt and limits.Custom lifting attachments for your fleet Custom lifting attachments can be designed for lifting your specific trucks. Call today to discuss your requirements.

Visit our web site: www.bdmfg.com 3

1-800-668-0324Outside Canada and the US: 1-705-855-2363

He

av

y T

ru

ck

Ma

int

en

an

ce

Eq

uip

me

nt

Pedestal BoomWMHA-PB-2.5 WMHA-PB-4Attaches to base Multi Handler to install and remove rear struts and main dump body cylinders.Interfaced with the B&D Multi Handler radio remote control.

Multi HandlerWMH-E-AC, WMH-E-DC, WMH-DIncrease safety, turn around time and availability to your trucks using existing shop floor space. Designed for Caterpillar, Komatsu and Liebherr haulage truck wheel motors. Completely engineered, certified and supported by B&D Manufacturing and alliances.

Certified heavy duty frame to hold 50 tons Complete movement to wheel motor: X, Y, Z, Yaw, Pitch and Roll including rotation on cradle camsComputer controlled and radio remote control Diesel, DC Battery or AC powered 30 HP 6 all-wheel drive, heavy duty grip, aggressive traction tires All three drive assemblies steer 45 degrees Multi Handler functions as work platform

Multi Handler Accessories B&D manufactures a wide range of accessories for the removal and replacement of truck parts via the Multi Handler's Quick Attachment Connectors.

Pedestal Boom (see below) Universal Front Strut Removal Tool (see below) Spindle Hub Removal Tool Rear Wheel Group Removal Tool Custom designed accessories to fit your fleet.



Universal Front Strut Removal ToolWMHA-FSRT-UAttaches to base Multi Handler to install and remove any model front strut.Interfaced with the B&D Multi Handler radio remote control.

Built with a work platform for mechanics Tilts strut and hub to accommodate a balance lift from an overhead crane

Tire Handler StationTHS-40-DOnly 15' deep and 20' wide this nimble but heavy-duty and reliable handler is specifically designed for use between bays to keep both bays continually accessible.

Seven axis radio remote control All wheel drive, diesel powered Crab crawl capability Work platform enables total visibility for the mechanic Handles 12.5 foot to 14 foot outside diameter tires Hydraulic proportional control

He

av

y T

ru

ck

Ma

int

en

an

ce

Eq

uip

me

nt



Grid Box Lifting DeviceGBLD-4TSpecifically designed for Grid Box removal in shops that have restricted space, this overhead crane attachment allows safe, speedy removal of the Grid Box with the dump box down, eliminating the need of a forklift.

Available for the Komatsu 930E only Engineer certified

B&D can custom design lifting devices for all of your trucks.

He

av

y T

ru

ck

Ma

int

en

an

ce

Eq

uip

me

nt

Spreader BarSB-930 SB-797Specifically for the 930E Komatsu wheel motor and 797B Caterpillar wheel hub, this handy piece of equipment will pick up your wheel motor with ease when it needs to be moved around the site.

20 - 30 ton max. Engineer certified

Body BlockBB-50-777 BB-100-930EBB-XXX-XXXXXXX = Weight (in tons)XXXX = Truck Model

Inserts between frame and truck body for maintenance purposesEngineer certified



He

av

y T

ru

ck

Ma

int

en

an

ce

Eq

uip

me

nt

Work PlatformsB&D Work Platforms are designed and engineered to decrease set-up times and increase production in a variety of environments. These platforms are used to secure personnel and equipment for shop & field maintenance. Using these platforms, your operation can virtually eliminate the need for cribbing, rigging and portable industrial scaffolding.

B&D can custom design and build work platforms for all of your needs.

Manually Propelled StairsBiggest, strongest, manually propelled stair and ladder system available todayIncorporates work platform capabilities Bolts together for replaceable parts Constructed from steel and aluminum 500 lb. load rating Engineer certified



He

av

y S

ho

ve

l M

ain

te

na

nc

e E

qu

ipm

en

t

Swing Shaft ChangerSSC-3.5-PHFinally an easy, fast and safe way to replace and service the swing shafts for the P&H 2300, 2800 and 4100 shovels.Featuring a 7-axis full function swing shaft placement machine.

Base scissor lift extends 4 ft. Main deck has 10" X movement and 12" Y movement The main tower is mechanically linked by 4 Acme threads providing 5.5 ft. of strokeThe main swing shaft table has an XY cradle movement (up to 6 degrees of motion) which gives the ability to place the shaft within a sphereThe final axis is a 30 degree rotation of the main swing shaft table (this accommodates meshing of the gears)Rated load 7000 lbs. 7.5 HP electric motor and 110 Vac control logic 3 GPM 2800 PSI manual hydraulic control system Provides a safe work platform with hand railing and tool storageBase machine weighs 6.5 tons or 12,500 lbs. Forklift handling for positioning with hydraulic track drive for fine control

B&D Cable Protection SystemCCO-4 CCO-X, X = 4 foot sectionsOn busy sites, machinery is always travelling over cables. This shortens the life of the cables and can be hazardous to the heavy vehicles that need to cross them. We created an effective solution, the B&D Cable Protection System.

A modular locking design available in 4 ft. lengths made of light-weight aluminumProtects valuable cables up to 6" in diameter Weather and abrasion resistant



He

av

y S

ho

ve

l M

ain

te

na

nc

e E

qu

ipm

en

t B&D Dipper Door Safety WedgeB&D manufactures wedges for dipper buckets ranging from 34 yards to 73 yards with or without wear plate.

The entire purpose of the B&D Dipper Safety Wedge is to save lives. Temporarily welded contraptions designed to keep the shovel door open have occasionally failed and as a result workers lives are at risk or have been lost. For the safety of the crew servicing dippers on your site, this dependable device is a must have. The B&D Dipper Safety Wedge is designed to lock the dipper door open for servicing and is:

Safe and reliable Simple to install and comes with written, recommended Standard Operating Procedures for complete worker trainingEasy for workers to handle as it is made of light-weight aluminum Engineer certified

Contact B&D for a quote on your specific application

Track Roller Removal ToolTRRT-Frame

Forkway Frame

TRRT-S-HITACHI5500TRHitachi 5500 Track Roller Saddle Attachment

TRRT-S-PH4100RIRP&H 4100 Rear Inner Roller Saddle Attachment

TRRT-S-PH2800RIRP&H 2800 Rear Inner Roller Saddle Attachment

TRRT-S-PH4100LTRP&H 4100 Lower Track Roller Saddle Attachment

TRRT-S-PH2800LTRP&H 2800 Lower Track Roller Saddle Attachment

B&D can custom design and manufacture attachments for any application.



He

av

y S

ho

ve

l M

ain

te

na

nc

e E

qu

ipm

en

t

Power Cable Lifting BasketCC-4100Mining operations that employ electric shovels to move large amounts of material need to reposition the shovel every so often, either to move to a new location or just to make a set over. To do this, the shovels power cable needs to be moved so the shovel does not run over the cable.This is the only rubber power cable lifting basket available on the market today.

Tower O-ringO-RING-28, O-RING-XXXX = Diameter of O-RingThese O-rings are a new concept in power cable suspension. With safety being the motivation for the design, they work by simply using the power cables weight to secure the cable to the actual O-ring. Two positive locking systems ensure that the cable will not come off the O-rings. A total of 3 pins are used and each pin is secured to the O-ring with a cable lanyard to keep from losing the pins. Each O-ring has a solar powered light for night time illumination.We can custom design O-rings to your cable size.Note: Each pin is easy to remove and replace while wearing hot gloves.



Min

es

& M

ill

s M

ain

te

na

nc

e E

qu

ipm

en

t B&D Tire ChangerA24283 Tire Changer with platform

handles tires with outside diameter 56" to 82" 6000 lbs. max.

A26326 Low Profile Tire Changer, no platform with crane attachment


29580 Adjustable Tire Changer, with platform and crane attachment


Significantly reduces time and improves safety during the tire change operationDesigned so that the operator is always above the load Move with use of a forklift Designed to eliminate the risk of the tire falling back toward the operatorTire can rotate 360 degrees for ease of alignment on installationEngineer certified Crane device optional Pallet jack optional

Custom designs available.



Min

es

& M

ill

s M

ain

te

na

nc

e E

qu

ipm

en

t

Jib BoomA22333

Safely lifts bulk shotcrete and cement bagsEngineer certified Total weight 79 lbs. Load rated for 4000 lbs. max.

Shotcrete Bag Lifter28412

Allows for safe lifting of shotcrete bagsIncreases life of shotcrete bags Easy to use Load rated for 4000 lbs. max. Engineer certified

Portable Wash BasinRG-049-M

This self-contained unit is a single source for hot and cold waterComplete with sink, faucet, 110 volt hot water tank and plumbing Electrical cord supplied Made with lightweight, heavy-duty aluminum ESA approved

Drill SteelExtractor Machine Type

CylinderDiameter

For usual drill steels up to about 18 feet long. 11-689 2.5"

Blow per min. at 70 lbs./in. Weight

Air consumption Cu.ft./min. at 70 lbs./in

1,580 35 lbs. 67



Min

es

& M

ill

s M

ain

te

na

nc

e E

qu

ipm

en

t

Small Vehicle RampsAL-016

Single unit splits into two allowing for ease of movement 2" cavity acts as a wheel chock Load capacity: 15 tons/ramp Engineer certified Made with lightweight, heavy-duty aluminum

Vehicle RampsRAMP-15-10

Includes 2 ramps that can support up to 30 tons Each ramp weighs 95 lbs. Made with lightweight, heavy-duty aluminum Custom heights available Engineer certified



Min

es

& M

ill

s M

ain

te

na

nc

e E

qu

ipm

en

t

Drill Steel Extractor11-689When the drill steel becomes so jammed that a rod twister no longer produces the desired effect, the B&D Drill Steel Extractor will enable just one man to pull out the drill steel in a few seconds without damage or loss. The B&D Drill Steel Extractor is the key accessory to full mechanization on site and continues to keep sites operating efficiently all over the world. It works like a rock drill but in the opposite direction. The drill steel is loosened and extracted in a sensible manner by compressed air. The shank of the drill steel is put sideways on to the inlet of the machine and firmly fixed to the extractor by means of a self-tensioning wedge. Recoil is taken up by a strong spring. It pulls in all directions and at any height and at floor level. It is available for standard 7/8 x 4 1/8 in hex. shank drill steel.

Drill SteelExtractor Machine Type

CylinderDiameter

For usual drill steels up to about 18 feet long. 11-689 2.5"

Blow per min. at 70 lbs./in. Weight

Air consumption Cu.ft./min. at 70 lbs./in

1,580 35 lbs. 67

Air Powered Lighting System26186

Air powered lighting system made for high output lights. Includes a portable light assembly, consisting of two separate light housings that are joined via a piano style hingeEach of the light housings includes an array of five 120 Vac 50 watt light bulbsThe light bulbs are hard-wired internally in a parallel circuit connection so that in the event one light bulb fails the remaining light bulbs continue to operate



Aluminum Wheel ChocksOur Wheel Chock line now includes 250, 450 and 500 ton models designed to safely hold a haulage truck in neutral on normal haul road grades when used according to specifications.

Always use in pairs (2 per axle) and on firm surfaces

Ge

ne

ra

l M

ain

te

na

nc

e E

qu

ipm

en

t

Wheel Chock Part No.: Weight: Tire Diameter Range:

Max. Capacity (in pairs):

WC-6 7 lbs. Small vehicles only 20,000 lbs.WC-8 10 lbs. 24" - 54" 40,000 lbs.

WC-10 15 lbs. 46" - 75" 120,000 lbs.WC-12 19 lbs. 62" - 80" 200,000 lbs.WC-15 25 lbs. 102" - 108" 250 tonsWC-17 31 lbs. 136" to 142" 450 tonsWC-20 45 lbs. 142" to 149" 500 tons

WC-20-W* 45 lbs. 142" to 149" 500 tonsWC-24 71 lbs. 56/80 R63 or 59/80 R63 Only 800 tons

WC-24-W* 71 lbs. 56/80 R63 or 59/80 R63 Only 800 tons* -W denotes wheeled wheel chock

B&D Heavy Duty StandsWhen working on heavy machinery you need incredibly sturdy and dependable equipment. B&D Heavy Duty Stands maintain a safe working environmentConstruction: Lightweight heavy-duty aluminum resists abuse from oil, salt and weather Heights: 12" to 96" Capacity: 13.5 -150 tons Engineer certified

Part Order No. Construction

Weight Capacity (tons):

Height (12" - 96")

Ball Transfer or Fork Ways:

HDS - 13.5 - XX - BT / FWHDS - 30 - XX - BT / FWHDS - 50 - XX - BT / FWHDS - 70 - XX - BT / FWHDS - 100 - XX - BT / FWHDS - 150 - XX - BT / FW



Ge

ne

ra

l M

ain

te

na

nc

e E

qu

ipm

en

t

Adjustable Boom Stand HDS-5-XX-ADJHDS-5-60-ADJ = adjustable from 42" to 60" HDS-5-72-ADJ = adjustable from 48" to 72" HDS-5-96-ADJ = adjustable from 60" to 96"

HDS-15-XX-ADJ HDS-15-22-ADJ = adjustable from 16" to 22" HDS-15-29-ADJ = adjustable from 20" to 29"

Light enough for one person to handle Can adjust to different machinery, requiring fewer boom stands at a site which can translate to cost savingsEngineer certified Made with lightweight, heavy-duty aluminum

Aluminum Step PlatformsASP-2, ASP-3, ASP-4, ASP-5Embossed traction buttons provide superior slip resistance in all weather conditions.

Self cleaning due to resilience of walking surface Can be built to your specifications Made with lightweight, heavy-duty aluminum 300 lbs. load rating Railings optional Engineer certified

Optional handrail versions for all models.

Wheel Chock Part No.: Weight: Tire Diameter Range:

Max. Capacity (in pairs):

WC-6 7 lbs. Small vehicles only 20,000 lbs.WC-8 10 lbs. 24" - 54" 40,000 lbs.

WC-10 15 lbs. 46" - 75" 120,000 lbs.WC-12 19 lbs. 62" - 80" 200,000 lbs.WC-15 25 lbs. 102" - 108" 250 tonsWC-17 31 lbs. 136" to 142" 450 tonsWC-20 45 lbs. 142" to 149" 500 tons

WC-20-W* 45 lbs. 142" to 149" 500 tonsWC-24 71 lbs. 56/80 R63 or 59/80 R63 Only 800 tons

WC-24-W* 71 lbs. 56/80 R63 or 59/80 R63 Only 800 tons* -W denotes wheeled wheel chock

Part Order No. Construction

Weight Capacity (tons):

Height (12" - 96")

Ball Transfer or Fork Ways:

HDS - 13.5 - XX - BT / FWHDS - 30 - XX - BT / FWHDS - 50 - XX - BT / FWHDS - 70 - XX - BT / FWHDS - 100 - XX - BT / FWHDS - 150 - XX - BT / FW

Extension andpart number Trigger Folding

Adjustablehead

6 ft. - A23026-6

6 ft. - A23026-6TFA

8 ft. - A23026-8

10 ft. - A23026-10

12 ft. - A23026-12F

12 ft. - A23026-12FA



Ge

ne

ra

l M

ain

te

na

nc

e E

qu

ipm

en

t

Portable Align Boring MachinesReliable and heavy duty for on-site or in-shop operation Flow thru bar design - allows for set-ups between bores Variable speed or quick-change fixed speed power Adjustable mounting system for operator ease Remote pendant control All B&D boring bars are chrome plated for extra hardness and straightened for improved machining Hydraulic and electric versions available 1.5 to 5 HP Boring range from 0.8" to 24" bore

Align Boring Product SeriesAM-1424 Boring Machine Series TM-8X Boring Machine Series EV-2500 Boring Machine Series

Align Boring Optional AccessoriesVariable Gear Feed Box Extra Small Bore Kit Cone Tightener & Centering Cone Extension Spider Follower Rest Grooving Tool Boring Bar Coupler Over the Bar Micrometer Micro Tool Insert Bore Measuring Telescoping Gauge Dial Tool Adjuster Facing Heads Mounting Systems



Ge

ne

ra

l M

ain

te

na

nc

e E

qu

ipm

en

t

Spray Paint Can Holder ExtensionA23026Made with lightweight, heavy-duty aluminum, spray can holders help mark Out Of Reach" areas, overhead and over holes. Eliminates the need for ladders, loader buckets, scissor lifts or basket lifts which would also require an additional employee and delay the production these machines were designed to perform. Used in Mining, Geology, Surveying and Electrical to mark a variety of locations for various reasons.

Extension andpart number Trigger Folding

Adjustablehead

6 ft. - A23026-6

6 ft. - A23026-6TFA

8 ft. - A23026-8

10 ft. - A23026-10

12 ft. - A23026-12F

12 ft. - A23026-12FA

Automated Bore Welding SystemsAll bore welder packages feature the exclusive pass-through drive system design enabling bore-to-bore transitions by telescoping or retracting the bore welder gun extension assembly BOA-408i series welders can be mounted between bores, welding out either end practical for bores similar to those of payloader front bores: by centre-mounting the BOA-408i drive, only one setup is required to weld both left and right side boresDiameter adjustment is a snap with the BOA torch pivot mechanism included with all BOA-408i welder systemsAll BOA-408i series systems may be equipped with the bore welder-to-boring bar interface for true plug-and-play simplicity: once set up, the bore welder simply plugs into the boring bar supportBOA Series bore welders offer diameter ranges from 0.8 to 48



Oil Drip CartsA27032 - 100 gal. - 36" W x 65" L x 10" H30345 - 200 gal. - 32.5" W x 65" L x 25.5" HMinimize spillage using these low profile aluminum oil carts. With heavy duty handles, front swivel castors and pneumatic wheels, theyre very easy to maneuver. Fits under any size of equipment.

Aluminum Antifreeze CartA27337Constructed as a sealed and vented tank to reuse the antifreeze, our 140 gal. low profile cart comes with 2" intake and discharge ports, two clean-out ports and sight glass. A heavy duty handle, front swivel castor and pneumatic wheels make it easy to maneuver. Fits under any size of equipment.

Aluminum Blocking KitA27000

Light-weight cribbing for heavy equipment, replaces old style wood cribbingSingle block stacking up to a maximum of 24" can support up to 30 tonsCrib style blocking to the same height can support up to 60 tonsEngineer certified G

en

er

al

Ma

int

en

an

ce

Eq

uip

me

nt



Aluminum Saw Horse RG-001-XX-XXXX length" / height"

Long lasting, durable and can be utilized as a work table for heavy parts. (Up to 5000 lbs. capacity)Can be built to your specifications Made with light-weight, heavy-duty, aluminum Max height 48 inches and max length 48 inches Engineer certified

Oxygen/Acetylene Rack & Portable Carrying CaseA22108

Holds 4 bottles of oxygen or acetylene Fork ways allow for ease of mobility Made with heavy-duty steel

A22038Holds 2 bottles of oxygen or acetylene Fork ways allow for ease of mobility Made with lightweight heavy-duty aluminum

Rim ToolRT-M-100Portable, easy to use and reduces time required to refit tires and rims. 48 inches to 78 inches in diameter and can be expanded. 14 inches high, 3 inches wide, and 4 inches deep.

Light weight: only 40 pounds Engineer certified

Ge

ne

ra

l M

ain

te

na

nc

e E

qu

ipm

en

t

Your local distributor:


(MK0020E 08-11) Specifications may change without notice.

Toll-free in the US or Canada: 1-800-668-0324Other countries phone: 1-705-855-2363 www.bdmfg.com B&D Manufacturing, Chelmsford, Ontario, Canada

Founded in 1980, B&D Manufacturing is a dynamic Canadian company that designs, manufactures and distributes innovative products and technologies to increase production and improve safety for industries globally. Our line includes products designed to support equipment for mines & mills, open pit trucks and shovels and construction. In addition to our OEM product line, we support a variety of clients with custom design, fabrication and manufacturing, on-site repair and rebuild services.

b&d manufacuring

Documents

base multi handler

bd manufacturing

bd super jack

reliable handler

multi handlerwmhe

radio remote control

axis radio remote

wheel groups