bbqs and outdoor - beefeater proline rangehood ......gas bbq** outdoor 1200 1350 warning! failure to...

AUSTRALIA / NEW ZEALAND

Assembly and Operating InstructionsRANGEHOODBRC214SA

2 CONTENTS

Thank you for purchasing a BeefEater cooker hood. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

Welcome to BeefEater.

BEFORE USING YOUR APPLIANCE

Before you use the cooker hood, we recommend that you read through the relevant sections of this manual, which provides the description of your appliance and its functions.

To avoid the risks that are always present when you use an appliance, it is important that the appliance is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards.

We recommend that you keep this instruction booklet for future reference and pass it on to any future owners.

After unpacking the appliance please check it is not damaged. If in doubt, do not use the appliance but contact your local customer care centre.

CONDITIONS OF USE

This appliance is intended to be used in household and similar applications such as:

• Staff kitchen areas in shops, offices and other working environments

• Farm houses

• By clients in hotels, motels and other residential type environments

• Bed and breakfast type environments.

IMPORTANT! Check for any damages or marks.

If you find the cooker hood is damaged or marked, you must report it within 7 days if you wish to claim for damage/marks under the manufacturer’s warranty. This does not affect your statutory rights.

Record model and serial number here:

Model:

Serial No:

Important safety instructions ....................................................... 3

Product description ...................................................................... 4

Cooker hood installation .............................................................. 5

Using the cooker hood ................................................................. 9

Maintenance and cleaning ......................................................... 10

Troubleshooting guide ................................................................ 11

Typical installations showing accessory applications ............... 12

Accessories ................................................................................. 13

Notes .......................................................................................... 14

Warranty...................................................................................... 15

SYMBOLS

WARNING!This symbol indicates information concerning your personal safety.

CAUTION!This symbol indicates information on how to avoid damaging the appliance.

IMPORTANT! This symbol indicates tips and information about use of the appliance.

ENVIRONMENT! This symbol indicates tips and information about economical and ecological use of the appliance.

INFORMATION ON DISPOSAL FOR USERS

ENVIRONMENT!Most of the packing materials are recyclable. Please dispose of those materials marked with the recycle symbol

through your local recycling depot or by placing them in appropriate collection containers.

If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.

CONTENTSCONGRATULATIONS

3SAFETY

This manual explains the proper use of your new BeefEater canopy cooker hood. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference.

This cooker hood is a domestic appliance which has been manufactured and tested to comply with Australian and New Zealand Standard AS/NZS 60335.2.31

WARNING!Follow these instructions carefully to avoid an electric shock or fire.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• Ensure the canopy rangehood is switched off before carrying out maintenance, to avoid any possibility of electric shock.

• Never carry out flambe cooking under the canopy rangehood.

• This canopy rangehood is recommended for barbecues when installed according to AS/NZS5601.

• This canopy rangehood can be installed for outdoor use if in a sheltered loction that protects the appliance from the weather.

• The exhaust from the canopy rangehood must not be discharged into any heating flue, which may carry combustion products from other sources. (Fig. 1)

• Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.

• There must be adequate ventilation of the room when the canopy rangehood is used at the same time as appliances burning gas or other fuels.

• Always cover lit gas burners with pots or pans when canopy rangehood is in use.

• Always switch off gas burners before you remove pots or pans.

• Do not leave lit gas burners exposed due to the risk of fire. (Fig. 2)

WARNING!Accessible parts may become hot when used with cooking appliances.

ELECTRICAL CONNECTION

Check that the mains voltage matches with the voltage on the data plate inside the canopy cooker hood. Check that the installation complies with standards of local building, gas and electrical authorities. Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.

SAFETY WARNINGS – FOR THE INSTALLER

When installing the cooker hood, make sure you adhere to the minimum and maximum distances from the cooker hood base to the hob or barbecue surface (as per table in “Installation” section).

EXHAUST FLUE INSTALLATION

The following rules must be strictly followed to obtain optimal air extraction.

• Keep exhaust flue short and straight

• Do not reduce the size or restrict exhaust flue

• Keep bends in the exhaust flue to a minimum

• When using flexible flue always install duct with helix pulled taut to minimise pressure loss

• Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the cooker hood.

NOTE: Some installations may require the exhaust cover to be cut to length. If required, cut with sharp tin snips or a fine-tooth hack saw blade, taking care not to distort or dent the exhaust cover.

Fig. 1 Fig. 2

IMPORTANT SAFETY INSTRUCTIONS

4 PRODUCT DESCRIPTION

Technical Specification

• Power supply: 220~240 volts 50Hz Connects to 10A power point

• Motors: 2 x 260 watts

• Lights: 4 x 3 watt, 12 volts LED

Additional items required for installation

• Worm drive clamps, duct tape or cable ties

• Ducting accessories

PRODUCT DESCRIPTION

PART

1 Ceiling mount bracket 1

2 Upper flue cover 1 (427mm)

3 Lower flue cover 1 (500mm)

4 Wall bracket 1

5 Air outlet with non-return valve 2

6 Main body and fan housing assembly 2 fans

7 Grease filters 6

8 Remote controller 1

Components list

7

8

6

5

4

3

2

1

5COOKER HOOD INSTALLATION

Dimensions

MODEL WIDTH HEIGHT DEPTH WEIGHT

BRC214SA 1200mm 780~1077mm 730mm 50.2kg

COOKER HOOD INSTALLATION

630

780~1077

610

172

730

ø200

403

1220

60

* If the instructions of the cooker specifies a greater distance than the minimum height stated, then that shall be the minimum height for the installation

** Installation height as specified in AS/NZS5601.1 and/or the local authority Regulations

2. Mark the location for flue cover wall mouting brackets and cooker hood mounting points and anti-tilt fixing points above the hood base using the hood base as the reference points.

6 COOKER HOOD INSTALLATION


1. Using a spirit level mark a vertical centre line on the wall where the cooker hood is to be positioned, and a horizontal line at the hood base position.

NOTE: See table below for the minimum and maximum height of the underside of cooker hood.

COOKER TYPE

INSTALL CLASS

MIN HEIGHT* (mm)

MAX HEIGHT* (mm)

Electric hob Indoor 600 1200

Gas hob Indoor 650 1200

Gas BBQ** Indoor 1350 1350

Gas BBQ** Quasi indoor 1200 1350

Gas BBQ** Outdoor 1200 1350

WARNING!

Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.

Ceiling 21.5

160 160 16055

287

587

575

286446

68065

Installation height

Installation wall

Rangehood mounting points

Anti-tilt fixing points

Centreline of cooking hood

VIEW A

VIEW A

7COOKER HOOD INSTALLATION

3. Install flue cover wall mounting brackets with suitable fixings. Install suitable screws for cooker hood mounting points (to support a total weight of 55kg) to the wall as marked.

4. Remove protective plastic film, if present, from the hood body and hang on the wall bracket. Install the two anti-tilt fasteners.

WARNING!Heavy product (51kg) – use a mechanical lifter, or at least two persons.

5. Use cable ties or suitable duct tape to secure flexible pipe to the duct outlet.

ø200mm

6. The cooker hood can control the gas supply by controlling the solenoid valve. Unscrew those 4 screws to open the cover of connection box.

7. Connect the wire as following picture show, then close the box cover and fix it with screws.

Power supply for solenoid

Connect to gas solenoid

Brown

Grey


8 COOKER HOOD INSTALLATION

Circuit connection for gas solenoid valve:

Wiring from rangehood

Power supply for solenoid valve

Solenoid valve

Bro

wn

Bro

wn

Gre

y

Gre

y

8. Insert power cord to power outlet.

Power supply for solenoid

To gas solenoid

9. Ensure locking tab of lower flue cover is bent before installing covers.

10. Slide telescopic flue cover to upper position and fix with screws provided.

9USING THE COOKER HOOD

1

3

5

2

4

665

43

21

You can also use the remote controller to control the cooker hood. The control method is the same. Before using the remote controller, please install the battery.

Unscrew the locking screw.

Pull the battery bracket backward.

Insert the battery (battery type: Cr2032), then fix the battery bracket with the screw.

NOTE: The remote controller has an operational range of 3 metres.

1 2 3 4 5 6

1 Lamp on/off 4 Speed 2

2 Delay end 5 Speed 3

3 Speed 1 6 Speed 4 (maximum)

Speeds

Speed 1: Suitable for light frying and light barbecuing.

Speed 2: Suitable for frying, wok cooking and barbecuing.

Speed 3: Suitable for intensive frying, intensive wok cooking and barbecuing.

Speed 4: Suitable for very smoky cooking and/or to clear smoke from an area that has a build up of smoke.

Turing on/off the lamp

Press button to turn on the lamp, press once again to turn off the lamp.

Turing on/off the fan

Press any fan level button to turn on relatived fan level. Press once again to turn off the fan. Or press other fan level button to change the fan level.

Delay end

When the cooker hood is working at any fan level, press

button to activate delay end function and button will begin to flash. After 5 min, The cooker hood will be swith off automatically. Press this button once again will deactivate delay end function.

NOTE: Delay end function is only for the fan motor. You need to turn off the lamp manually.

Filter check

When the motor on time reachs 50 hours, the lamp control button will flash when the cooker hood is on. press and hold lamp control button for 2 sec to stop the flashing and reset the time counter.

WARNING!The cooker hood is not intended for continuous use over barbecues with lit burners, without cooking in progress.

Control operation

USING THE COOKER HOOD

654321

10 MAINTENANCE AND CLEANING

WARNING!Before maintenance or cleaning is carried out, the cooker hood should be disconnected from the main power supply. Ensure the cooker hood is switched off at the wall socket and the plug removed.

WARNING!External surfaces are susceptible to scratches and abrasions, so please follow the cleaning instructions to ensure the best possible result is achieved without damage.

Stainless steel surface

These instructions must be followed to avoid a fire risk. Clean stainless steel surfaces using non-abrasive cleaning products that are specifically for use on stainless steel. To ensure best results also use an even pressure and follow the grain of the stainless steel. Use of a soft cloth reduces the risk of scratching. If the cloth is wet ensure that a dry soft cloth is used to wipe down the surface again and then apply a satinless steel protector spray to reduce the risk of any surface rust appearing.

Cleaning grease filters

The filters can be cleaned by hand or dishwasher. After cleaning ensure the filters are completely dry before refitting. Grease filters must be removed every four weeks (maxumum) for cleaning to reduce the risk of fire.

• By hand - Soak in warm water and some washing up liquid. For stubborn grease stains use a soft nylon brush to help remove those stains.

• In a dishwasher - Ensure that placement of the filters is made so as to not impede the function of the dishwasher spray arm. Washing the filters in a dishwasher may cause discolouration over time although it will not effect their performance. Filters should be washed seperately to crockery and other kitchen utensils.

Removing filters

1. Lift the filter.

2. Pull down the filter lock level and then pull the filter assembly down and out of the hood.

Unscrew all the 4 screws on lateral sides, then open the inner filter for cleaning.

Do not use the cooker hood without filters installed.

Do not clean the canopy cooker hood with water using a hose or high pressure cleaner.

Use both hands for removing and re-fiting the fiters to avoid accidentally dropping the fiters and causing damage to your cooktop or kitchen surfaces.

Replacing the LED lamps

If LED lamps need replacing, They must be replaced by lamps as stated in the technical specifications. Use a screw driver to push the LED lamp from back side to remove LED lamp and replace with new lamp.

MAINTENANCE AND CLEANING

11TROUBLESHOOTING

TROUBLESHOOTING GUIDE

PROBLEM REMEDY

The cooker hood will not start Check that cooker hood is connected to an electrical supply.

Check that a fan speed has been selected.

The cooker hood is not working Check that fan speed is high enough.

Check that the grease filters are clean.

Check that the kitchen is adequately vented to allow entry of fresh air.

Check that ducting and outlets are not blocked.

The cooker hood has swiched off during operation The safety device may tripped - turn off the cooking appliance and wait for the device to reset. If the hood is installed below the heights indicated in the installation instructions, the motor will cut out frequently which will damage the cooker hood.

If you have completed all of the above checks and are still experiencing difficulty, please contact your local Electrolux Service Centre.

12 TYPICAL INSTALLATIONS

TYPICAL INSTALLATIONS SHOWING ACCESSORY APPLICATIONS

NOTE: Flue positioning with flexible ducting or bends will be required to create sufficient clearance between the flue pipes to allow for weather proofing fittings when penetrating roof lines.

ROOF COWL ACCESSORY

FLUE

FLUE

WALL VENT 90˚ ELBOW ACCESSORY

Some installations may require a vertical discharge cowl.

(extension may be required, depending on installation)

(extension may be required, depending on installation)

13ACCESSORIES

ACCESSORIES (200mm)

7 865

4321

REF PART NUMBER DESCRIPTION

1 AR200FJ 200mm Flue joiner

2 AR200E 200mm 90 Elbow

3 AR200WV 200mm Wall vent

4 AR200WC 200mm Worm drive clamp

5 AR200FD 200mm Semi rigid flexible flue (0.7m min & 3.0m max length)

6 AR200F 200mm Flue (length 1200mm)

7 AR200RC 200mm Roof cowl

8 AR630FS Upper flue cover extension (1200mm)

NOTE: Accessories are to be purchased separately.

14 NOTES

NOTES

This document sets out the terms and conditions of the product warranties for BeefEater Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law.

1. In this warranty: (a) ‘ACL’ or ‘Australian Consumer Law’ means Schedule 2 to the

Competition and Consumer Act 2010; (b) ‘Appliance’ means any Electrolux product purchased by you and

accompanied by this document; (c) ‘ASC’ means Electrolux’s authorised serviced centres; (d) ‘BeefEater’ is the brand controlled by Electrolux Home Products Pty

Ltd of 163 O’Riordan Street, Mascot NSW 2020, ABN 51 004 762 341 in respect of Appliances purchased in Australia and Electrolux (NZ) Limited (collectively “Electrolux”) of 3-5 Niall Burgess Road, Mount Wellington, in respect of Appliances purchased in New Zealand;

(e) ‘WarrantyPeriod’meanstheperiodspecifiedinclause3ofthiswarranty;

(f) ‘you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and ‘your’ has a corresponding meaning.

2. Application: This warranty only applies to new Appliances, purchased and used in Australia or New Zealand and is in addition to (and does not exclude, restrict, or modify in any way) other rights and remedies under a law to which the Appliances or services relate, including any non-excludable statutory guarantees in Australia and New Zealand.

3. Warranty Period: Subject to these terms and conditions, this warranty continues for in Australia for a period of 24 months and in New Zealand for a period of 24 months, following the date of original purchase of the Appliance.

4. Repair or replace warranty: During the Warranty Period, Electrolux or its ASC will, at no extra charge if your Appliance is readily accessible for service, without special equipment and subject to these terms and conditions, repair or replace any parts which it considers to be defective. Electrolux may, in its absolute discretion, choose whether the remedy offeredforavalidwarrantyclaimisrepairorreplacement.ElectroluxoritsASC may use refurbished parts to repair your Appliance. You agree that any replaced Appliances or parts become the property of Electrolux.

5. Travel and transportation costs: Subject to clause 7, Electrolux will bear the reasonable cost of transportation, travel and delivery of the Appliance to and from Electrolux or its ASC. Travel and transportation will be arranged by Electrolux as part of any valid warranty claim.

6. Proof of purchase is required before you can make a claim under this warranty.

7. Exclusions: You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. This warranty does not cover:

(a) lightglobes,batteries,filtersorsimilarperishableparts; (b) parts and Appliances not supplied by Electrolux; (c) cosmeticdamagewhichdoesnotaffecttheoperationofthe

Appliance;

(d) damage to the Appliance caused by: (i) negligence or accident; (ii) misuse or abuse, including failure to properly maintain or service; (iii) improper, negligent or faulty servicing or repair works done by

anyone other than an Electrolux authorised repairer or ASC; (iv) normal wear and tear; (v) power surges, electrical storm damage or incorrect power supply; (vi) incomplete or improper installation; (vii) incorrect, improper or inappropriate operation; (viii) insect or vermin infestation; (ix) failure to comply with any additional instructions supplied with

the Appliance;In addition, Electrolux is not liable under this warranty if: (a) the Appliance has been, or Electrolux reasonably believes that the

Appliance has been, used for purposes other than those for which the Appliance was intended, including where the Appliance has been used for any non-domestic purpose;

(b) theApplianceismodifiedwithoutauthorityfromElectroluxinwriting; (c) the Appliance’s serial number or warranty seal has been removed

or defaced8. How to claim under this warranty: To enquire about claiming under

this warranty, please follow these steps: (a) carefully check the operating instructions, user manual and the terms

of this warranty; (b) have the model and serial number of the Appliance available; (c) have the proof of purchase (e.g. an invoice) available; (d) telephone the numbers shown below.

9. Australia: For Appliances and services provided by Electrolux in Australia: Electrolux goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replaced if the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. ‘Acceptable quality’ and ‘major failure’ have the same meaning as referred to in the ACL.

10. New Zealand: For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act, the Sale of Goods Act and the Fair Trading Act. Where the Appliance was purchased in New Zealand for commercial purposes the Consumer Guarantee Act does not apply.

11.Confidentiality: You accept that if you make a warranty claim, Electrolux and its agents including ASC may exchange information in relation to you to enable Electrolux to meet its obligations under this warranty.

WarrantyFOR SALES IN AUSTRALIA AND NEW ZEALAND

APPLIANCE: BEEFEATER RANGEHOODS

Important NoticeBefore calling for service, please ensure that the steps listed in clause 8 above have been followed.

FOR SERVICE ortofindtheaddressofyournearestauthorised service centre in Australia

PLEASE CALL 13 13 49For the cost of a local call (Australia only)

AUSTRALIA ELECTROLUX HOME PRODUCTS

163 O’Riordan Street, Mascot NSW 2020electrolux.com.au

FOR SPARE PARTS ortofindtheaddressofyournearest

spare parts centre in AustraliaPLEASE 13 13 50

For the cost of a local call (Australia only)

FOR SERVICE ortofindtheaddressofyournearest

authorised service centre in New Zealand PLEASE CALL 0800 10 66 10

(New Zealand only)

NEW ZEALAND ELECTROLUX (NZ) Limited

3-5 Niall Burgess Road, Mount Wellingtonelectrolux.co.nz

FOR SPARE PARTSortofindtheaddressofyournearestspare parts centre in New Zealand

PLEASE 0800 10 66 20(New Zealand only)

BRange_War_May17















Appliance;
























(New Zealand only)





BRange_War_May17

15WARRANTY















Appliance;
























(New Zealand only)





BRange_War_May17















Appliance;
























(New Zealand only)





BRange_War_May17

AUSTRALIA

phone: 1300 307 939fax: 1800 356 669email: [email protected]: beefeaterbbq.com

NEW ZEALAND

phone: 0800 436 245fax: 0800 225 088email: [email protected]: beefeaterbbq.com

For more information on all BeefEater products, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website:

BeefEater. We are part of the Electrolux Family. To add a touch of professional inspiration to your home, visit electrolux.com.au

© 2018 Electrolux Home Products Pty LtdABN 51 004 762 341BMAN_Rangehood_BRC214SA_Feb18

bbqs and outdoor - beefeater proline rangehood ......gas bbq** outdoor 1200 1350 warning! failure to...

Documents