baumit ewi & render systems for porotherm masonry products

BaumitEWI & Render systems for Porotherm Masonry products

Baumit Product Guide

Ideas with a future

n Light and easy applicationn Tried and tested

Baumit Renders for Porotherm Masonry

International presence

Welcome to Baumit

The Baumit brand is recognised throughout Europe as a leader in building materials. It is part of the Wietersdorfer Group based in Klagenfurt, Austria, which has companies in 20 countries employing over 3000 people with an annual turnover in 2010 of €680m.

Baumit products and systems are now available in the UK and Ireland through Baumit UK Ltd and this company provides technical backup, sales support, product training and know how to our network of distribution partners and approved installers.

Baumit innovation

True to its philosophy, ”Ideas with a Future“, the Baumit brand continually develops and produces innovative productsand systems tailored to the demands of the customer. Baumit offers a range of specially formulated render, plaster and thermal insulating systems for Porotherm masonry. The systems are vapour permeable and complement the breathable nature of Porotherm masonry. The products are suitable for machine application to increase efficiency and maintain consistent material quality during application.

2

3

Baumit external wall insulation system - open KlimaFacade

The Baumit open KlimaFacade is a breathable insulation system. The perforations in the Baumit open®reflect boards enable water vapour to diffuse through the insulation system.

The system offers the enhanced thermal performance of silver-grey EPS without compromising the breathability of the Porotherm masonry.

The white coating on the board surface reflects low level sunlight. This reduces heat absorption and protects the board from the effects of significant temperature changes which can occur between day and night.

External wall insulation system

Baumit lightweight render system

Baumit Lightweight render system

The Baumit render systems for Porotherm comprise of a basecoat render and a decorative, coloured topcoat render. In certain circumstances an intermediary reinforcement coat may also be required.

Baumit basecoat renders

The core component of the system is the lightweight render basecoat. The render is specifically designed to suit Porotherm masonry in terms of strength compatibility and provide good weather resistance. The lightweight basecoat acts as a buffer zone between the masonry and topcoat render, absorbing stresses from the masonry and thereby reducing the risk of cracking to the topcoat.

These products are suitable for internal and external use onto the Porotherm block substrate.

Baumit reinforcement coat

The reinforcement layer of MC55W provides an extra level of protection to the render system when applied in locations exposed to severe or very severe weather conditions. It comprises of a 3 - 5 mm thick layer of contact mortar with an embedded layer of Baumit StarTex reinforcing mesh applied over the basecoat render.

Porotherm masonry Baumit basecoat render

Porotherm T7, T8 Baumit MP 69 Speed

Porotherm S9, S11, T12 Baumit MP 69 Speed

Porotherm 100, 140, 190 Baumit MP 69


4

5

Baumit topcoat renders

Decorative finishes

Baumit topcoat renders

The render system is completed with a decorative topcoat render to provide the essential water resistance to the outer surface of the render system. The Baumit topcoat renders are avalable in a range of aggregate sizes and colours from the Baumit Life colour system. Baumit ready mixed topcoat renders do not require painting.

A wide choice of Baumit topcoats is available including:n NanoporTopn SilikonTopn CreativTopn SEP

Application

A coat of DG27 Baumit Primer is applied to surface of the basecoat render with a brush or roller and left to dry for 24 hours. The topcoat render is applied with a stainless steel plastering trowel or suitable spraying equipment and smoothed out flat to the thickness of the aggregate. After a short while the surface can be textured in tight circular motions using a smooth plastic floating trowel. The topcoat render should be applied systematically to complete sections without breaks. A wet edge must be maintained to avoid inconsistencies in the finished texture.

6

Baumit lightweight plaster system


Baumit Kalkin plaster system

Baumit Kalkin range of plastering products regulate the internal humidity levels, protecting naturally against mould growth.

The products are purely mineral-based and free of pollutants to ensure a healthy living environment. The systembasecoat plaster and finishes have a micro-pore structure which provides outstanding climate-regulating properties.Excess moisture from the air is absorbed into the micro-pores and held, to maintain a dry plaster surface. As theinternal conditions become drier the moisture is slowly released back into the room to rebalance the humidity levels.

7

Application

Site work

Porotherm masonry

The rules for best practice must be observed when erecting Porotherm masonry. Breakages and loose materials or open joints in the wall surface should be repaired and filled. Protect the masonry and building materials from water ingress during construction. The Porotherm masonry should be dry before rendering. Remove any signs of efflorescence with a dry brush. Do not use water. Remove any dust, dirt or other contaminants from the surface of the masonry.

General basecoat application

Baumit lightweight render systems and Klima plaster sytems are applied directly onto Porotherm masonry. Special surface pretreatments are not required. Where necessary, the walls may be mist sprayed with water to reduce high suction. Refer to our technical support team for guidance on dealing with changes in the rendering substrate such as concrete elements, steel lintels or insulants etc.

n Spray or hand apply the render or plaster in two passes, wet on wet to reduce the suction from the masonry.

n Rule off the render or plaster with a straight edge to produce a flat uniform basecoat free from undulations to the required thickness.

n On hardening, key the surface with a grid float or consolidate it with a rubbing up float.

n Leave to dry for 1 day per mm basecoat thickness before applying further coatings.

Spray application

Removing laitance with a grid float

Ruling off with a straight edge

8

Baumit EWI System for Porotherm Blocks


System Baumit EWI System open- KlimaFassade Baumit EWI System EPS Baumit EWI System Mineral Baumit EWI System

Natur (2) Baumit EWI System XS 022

Breathable and vapour open Comfortable indoor climate Excellent energy saving properties

Highly versatile and cost effective Proven long term performance Widest choice of decorative finishes

High performance insulation system Breathable and vapour open Suitable on all backgrounds

Natural wood fibre insulation Vapour open throughout Improved sound resistance

Lowest lambda value Improved thermal efficiency Thinner insulation for extra slim solution

Adhesive Baumit openContact Baumit StarContact Baumit StarContact Forte Mechanical fixing to background Baumit StarContact Forte

Insulation Baumit open reflect Baumit EPS-F Baumit EPS-F plus Baumit DD Mineral Wool Approved wood fibre boards Baumit XS 022

Fixings Baumit STR UBaumit StarTrack

Baumit STR UBaumit StarTrack Baumit STR U Approved fixings Baumit STR U

Base coat Baumit openContact Baumit StarContact Baumit StarContact Forte Baumit Bonding Mortars Baumit StarContact Forte

Mesh Baumit openTex Baumit StarTex Baumit StarTex Baumit StarTex Baumit StarTex

Primer Baumit openPrimer Baumit UniPrimer Baumit UniPrimer Baumit UniPrimer Baumit UniPrimer

Decorative finish (1)

Baumit NanoporTopBaumit SilikonTopBaumit StyleTop

Baumit CreativTop

Baumit NanoporTopBaumit SilikonTop

Baumit GranoporTopBaumit StyleTop

Baumit CreativTop


Baumit CreativTop

Baumit NanoporTopBaumit SilikonTopBaumit CreativTop



Baumit CreativTop

(1) When using coloured decorative finishes on EWI systems, colours with a lightness value (HBW) of at least 25 must be used.

A complete range of External Wall Insulation System for Porotherm Block

Baumit offers highly efficient external wall insulation systems with sophisticated high-tech products. From the innovative breathable Baumit open® - the Klima Façade to our XS 022 extra slim insulation. All system components are matched to work together and thus offer 100% proven security.

9

System Baumit EWI System open- KlimaFassade Baumit EWI System EPS Baumit EWI System Mineral Baumit EWI System

Natur (2) Baumit EWI System XS 022

Breathable and vapour open Comfortable indoor climate Excellent energy saving properties

Highly versatile and cost effective Proven long term performance Widest choice of decorative finishes

High performance insulation system Breathable and vapour open Suitable on all backgrounds

Natural wood fibre insulation Vapour open throughout Improved sound resistance

Lowest lambda value Improved thermal efficiency Thinner insulation for extra slim solution

Adhesive Baumit openContact Baumit StarContact Baumit StarContact Forte Mechanical fixing to background Baumit StarContact Forte

Insulation Baumit open reflect Baumit EPS-F Baumit EPS-F plus Baumit DD Mineral Wool Approved wood fibre boards Baumit XS 022

Fixings Baumit STR UBaumit StarTrack

Baumit STR UBaumit StarTrack Baumit STR U Approved fixings Baumit STR U

Base coat Baumit openContact Baumit StarContact Baumit StarContact Forte Baumit Bonding Mortars Baumit StarContact Forte

Mesh Baumit openTex Baumit StarTex Baumit StarTex Baumit StarTex Baumit StarTex

Primer Baumit openPrimer Baumit UniPrimer Baumit UniPrimer Baumit UniPrimer Baumit UniPrimer

Decorative finish (1)


Baumit CreativTop



Baumit CreativTop


Baumit CreativTop

Baumit NanoporTopBaumit SilikonTopBaumit CreativTop



Baumit CreativTop

Baumit products are certified for use with selected third-party wood fibre board systems for external and internal wall insulation. Contact our Sales Office for more details. Refer to Product Datasheets for application information.

Baumit Duplex Technology for over existing EWI

Lower heating costs Comfortable indoor climate See your house in a new light

Baumit openContact Baumit StarContact

Baumit open reflectBaumit EPS-F

Baumit EPS-F plus

Baumit StarTrack Duplex

Baumit openContactBaumit StarContact

Baumit openTex / StarTex

Baumit openPrimer / UniPrimer

Baumit NanoporTop Baumit SilikonTop


Baumit CreativTop

■ Saves energy and cuts costs■ Improves living comfort■ Proven long term performance

Assured quality in every system

Certification… our commitment to quality

Baumit holds current European Technical Approval (ETA) certificates for all our EWI systems in accordance with the internationally recognised ETAG 004 Guidelines for Technical Approval of External Thermal Insulation Composite Systems with Rendering.

In addition our EWI systems hold the following national certifications:

British Board of AgrémentAgrément Certificate 13/5082Product Sheet 1: EPS, open & MWProduct Sheet 2: XS 022

National Standards Authority of IrelandAgrément Certificate 09/0336EPS, open, MW, XS022

Baumit External Wall

CERT No. 09/0336

Insulation System

E TAEUROPEAN ORGANISATION FOR TECHNICAL APPROVALS

Baumit External Wall

CERT No. 09/0336

Insulation System

E TAEUROPEAN ORGANISATION FOR TECHNICAL APPROVALS

Certificate No. 09/0336 Detail Sheet 1 / Baumit 30 External Wall Insulation Systems

CERTIFICATE NO. 09/0336 DETAIL SHEET 1

Baumit 30 External Wall Insulation Systems

PRODUCT DESCRIPTION This Detail Sheet relates to the Baumit 30 External Wall Insulation Systems, as defined in NSAI Agrément Certificate 09/0336. This Detail Sheet must be read in conjunction with NSAI Agrément Certificate 09/0336, which gives the system’s position regarding the Building Regulations and the Conditions of Certification.

USE:The systems are for the external insulation of: (a) Existing concrete or masonry dwellings; (b) New concrete or masonry commercial or

industrial buildings, which are designed in accordance with the Building Regulations 1997 to 2013.

1.1 ASSESSMENT In the opinion of NSAI Agrément, Baumit 30 External Wall Insulation Systems, if used in accordance with this Detail Sheet, meets the requirements of the Building Regulations 1997 - 2013 as indicated in Section 1.2 of Certificate 09/0336.

The systems are suitable for use up to a maximum of six storeys (18m) in height in purpose groups 1(a), 1(b), 1(c), 2(a), 2(b), 3, 4(a) and 4(b) as defined in Part B of the Building Regulations 1997 to 2013. The systems have not been assessed for use with timber frame or steel frame construction, or where a design life in excess of 30 years is required. The Baumit 30 External Wall Insulation Systems are a single seal system.

1.2 BUILDING REGULATIONS 1997 to 2013 This matter is dealt with in NSAI Agrément Certificate 09/0336.

Part One / Certification 1

Readers are advised to check that this Certificate has not been withdrawn or superseded by a later issue by contacting NSAI Agrément, NSAI, Santry, Dublin 9 or online at http://www.nsai.ie/modules/certificates/uploads/pdf/IAB090336.pdf

IRISH AGRÉMENT BOARD CERTIFICATE NO. 09/0336 w&p Baustoffe GmbH, Ferdinand-Jergitsch-Str. 15, A-9020 Klagenfurt, Austria. T: +43 (0) 463 56676-0 F: +43 (0) 463 56676-8095 E: [email protected] W: www.baumit.com

CI/SfB 41 Rq2

Baumit 60 External Insulation Systems

Système d’isolation pour murs extérieurs Wärmedämmung für Außen-wand

NSAI Agrément (Irish Agrément Board) is designated by Government to issue European Technical Approvals.

NSAI Agrément Certificates establish proof that the certified products are ‘proper materials’ suitable for their intended use under Irish site conditions, and in accordance with the Building Regulations 1997 to 2013.

PRODUCT DESCRIPTION: This Certificate relates to the Baumit 60 External Insulation Systems. Each system is comprised of: • Surface preparation of masonry or concrete

substrate; • Full system beads and render only beads; • Insulation board; • Cementitious base coat incorporating a glass

fibre mesh; • Synthetic or cementitious decorative finish

coat; • Mechanical fixings; • Adhesive fixings; • Weather tight joints; • Movement joints; • Provision for limiting cold bridging at external

wall/floor junctions in compliance with Acceptable Construction Details published by the DoEHLG.

• Provision for fire stopping at external compartment walls and floors.

w&p Baustoffe GmbH is responsible for the design, manufacture and supply of all components to approved specifications. w&p

Baustoffe GmbH has appointed Grafton Merchanting ROI as their distribution partner in Ireland. The system is designed by Grafton Merchanting ROI on a project specific basis in accordance with an approved design process. The installation of the system is carried out by installers who have been trained by Grafton Merchanting ROI, and are approved by Grafton Merchanting ROI and NSAI Agrément to install the system. Applicators must adhere to strict installation guidelines as specified by Grafton Merchanting ROI. w&p Baustoffe GmbH offers a five year materials guarantee, subject to certain terms and conditions. This Certificate certifies compliance with the requirements of the Building Regulations 1997 to 2013. USE This Certificate covers the system for use as external insulation on new concrete and masonry

10

Porotherm External Renders - Product Overview


In planning and carrying out rendering work it is necessary to follow all relevant and currently applicable standards, codes of practice, product datasheets and technical guidelines.

Porotherm Fired Clay Masonry Blocks Standard Exposure Zone PTH 100, 120, 190, T12

Porotherm Fired Clay Masonry Blocks Standard Exposure Zone T10, T9, T8, T7

Porotherm Fired Clay Masonry Blocks Severe / Very Severe Exposure Zone PTH 100, 120, 190, T12

Porotherm Fired Clay Masonry Blocks Severe / Very Severe Exposure Zone T10, T9, T8, T7

Background

Pre-treatment – Not required –

Pre-Treatment not required on Porotherm Blocks

– Not required –






Base coat

Note:Baumit Healthy Living RK70N and RK39 lime base renders can be used as an alternative. Speak to Baumit Technical for detailed specifications.

λ-value [W/(mK)] λ-value [W/(mK)] λ-value [W/(mK)] λ-value [W/(mK)]

0.29 - 0.12 0.10 - 0.07 0.29 - 0.12 0.10 - 0.07

➀ MP 69 MP 69 with ➁ StarTex Mesh embedded into MP69

MP 69 with additional layer of MC55W and ➁ StarTex Mesh embedded into MC55W


➀ MP 69 Speed MP 69 Speed MP 69 Speed with additional layer of MC55W and ➁ StarTex Mesh embedded into MC55W

MP 69 Speed with additional layer of MC55W and ➁ StarTex Mesh embedded into MC55W

Plinth render LS 62 / MPS 60 Speed LS 62 / MPS 60 Speed LS 62, MPS 60 Speed LS 62, MPS 60 Speed

Note: Relevant guidelines must be followed when installing plinth renders.

Top coat

Note:grain size <2 mm special measuresare necessary forfor example usingMC55W with meshreinforcement

Grain size ≥ 2 mm

➂ eg. SEP 02, KRP, Fascina, Fascina SEP, NanoporTop, Baumit SilikonTop, GranoporTop, CreativTop




Grain size < 2 mm

In this small grain size a reinforcing layer with MC55W and StarTex is required if no mesh is applied in base coats

In this small grain size a reinforcing layer with MC55W and StarTex is required if no mesh is applied in base coat



Paint ➃ Baumit facade paints are required with SEP and some other top coats please see datasheets for more information.

Note: All facade paints contain algicide and fungicide. Lightness values (HBW) of coloured plasters and paints are dependent on the render system. Please refer to our technical datasheets.

11

In planning and carrying out plastering work it is necessary to follow all relevant and currently applicable standards, codes of practice, product datasheets and technical guidelines.

Porotherm Internal Plasters - Product Overview

Porotherm Fired Clay Masonry Blocks PTH 100, 120, 190, T12, T10, T9, T8, T7

Porotherm Fired Clay Masonry Blocks PTH 100, 120, 190, T12, T10, T9, T8, T7. Healthy Living Lime Products

Porotherm Fired Clay Masonry Blocks PTH 100, 120, 190, T12, T10, T9, T8, T7 Gypsum Products

Background

Pre-treatment - Walls – Not required –






Base coat - Walls ➀ MP69 / MP69 Speed ➀ Kalkin KP 37, Kalkin KP 36 W, RK38, RK39 Kalkin KlimaLife, RK 70 N

➁ Baumit Glatt 17L (Single Coat)

Top coat - Walls & ceilings ➁ MP69 / MP69 Speed ➁ Kalkin Fein W, Kalkin RK38, RK39, Kalkin KlimaLife, RK 70 N

Skim finishing After drying of previous coat, apply Kalkin Glätt W in thickness of 2mm.

Paint ➂ All Baumit interior paints

Porotherm Fired Clay Masonry Blocks Standard Exposure Zone PTH 100, 120, 190, T12

Porotherm Fired Clay Masonry Blocks Standard Exposure Zone T10, T9, T8, T7

Porotherm Fired Clay Masonry Blocks Severe / Very Severe Exposure Zone PTH 100, 120, 190, T12

Porotherm Fired Clay Masonry Blocks Severe / Very Severe Exposure Zone T10, T9, T8, T7

Background

Pre-treatment – Not required –








Base coat

Note:Baumit Healthy Living RK70N and RK39 lime base renders can be used as an alternative. Speak to Baumit Technical for detailed specifications.

λ-value [W/(mK)] λ-value [W/(mK)] λ-value [W/(mK)] λ-value [W/(mK)]

0.29 - 0.12 0.10 - 0.07 0.29 - 0.12 0.10 - 0.07

➀ MP 69 MP 69 with ➁ StarTex Mesh embedded into MP69



➀ MP 69 Speed MP 69 Speed MP 69 Speed with additional layer of MC55W and ➁ StarTex Mesh embedded into MC55W

MP 69 Speed with additional layer of MC55W and ➁ StarTex Mesh embedded into MC55W

Plinth render LS 62 / MPS 60 Speed LS 62 / MPS 60 Speed LS 62, MPS 60 Speed LS 62, MPS 60 Speed

Note: Relevant guidelines must be followed when installing plinth renders.

Top coat

Note:grain size <2 mm special measuresare necessary forfor example usingMC55W with meshreinforcement

Grain size ≥ 2 mm





Grain size < 2 mm

In this small grain size a reinforcing layer with MC55W and StarTex is required if no mesh is applied in base coats




Paint ➃ Baumit facade paints are required with SEP and some other top coats please see datasheets for more information.

Note: All facade paints contain algicide and fungicide. Lightness values (HBW) of coloured plasters and paints are dependent on the render system. Please refer to our technical datasheets.

Baumit MP 69

Universal, lightweight lime-cement render with lightweight aggregate. Specially designed for use onto thermal insulating masonry as a basecoat and topcoat in internal and external areas.

Baumit Kalkin RK 38

Pure lime basecoat and topcoat plaster for use in all internal areas. Special microporous design for rapid absorption and release of water vapour. Certified by eco-Institut. Purely mineral and free from toxins. This surface finish is not suitable for direct tile adhesion, please contact our technical support team. Aggregate size 0.8 mm.

Baumit Kalkin Glätte

Natural white lime skimming plaster for creating a fine smooth matt finish onto Kalkin basecoat plasters and other lime and lime-cement renders and concrete surfaces. For use in internal areas only.

Baumit SilikonTop

Ready to use, mineral wet top coat render for thin coat application. Provides a vapour permeable and stain retarding decorative finish with scratched or dragged grain texture for internal and external areas. Suitable for hand or machine application. Aggregate size 1.5, 2 and 3 mm.

Baumit NanoporTop

High performance thin-layer top coat render with superior self-cleaning properties and breathability due to nano-technology. Available in scratched textures (1.5/2/3 mm)

Baumit UK Ltd4200 Waterside Centre Solihull Parkway Birmingham Business Park BirminghamB37 7YN

UK: Tel: +44 (0) 333 358 3434 IRL: Tel: +353 (0) 1 691 7868www.baumit.co.uk [email protected]


Product Information

Your local distributor

Baumit MP 69 Speed

Universal, accelerated setting, lightweight lime-cement render with lightweight aggregate. Specially designed for use onto thermal insulating masonry as a basecoat and topcoat in internal and external areas.

Baumit MultiContact MC55W

Mineral based, multi-purpose contact mortar for use as a reinforcement coat with Baumit StarTex reinforcing mesh over render basecoats, old facades and selected render carrier boards. Aggregate size 1.2 mm.

Baumit Kalkin KlimaLife

Natural white and also available in Life© colour range, fast-setting lime plaster with low cement content and lightweight mineral aggregates for use in indoor and wet room locations, suitable as base coat and top coat. Easily finished. EN 998-1: GP, CS II, W 1. Aggregate size 0 - 1 mm.

Baumit SEP

Mineral based topcoat render for a decorative freestyle textured finish. Weather resistant and water vapour permeable. For internal and external areas. Suitable for hand or machine application. Aggregate size 2, 3, and 4 mm.

Baumit DG27 Primer

Acrylic based liquid primer for use on internal and external areas which helps to reduce and equalize the suction on newly prepared surfaces and to ensure good adhesion with the Baumit topcoat renders.

For more information, please contact the Baumit technical support team on +44 (0) 333 358 3434

Vers

ion:

1/2

014

(HB

4116

)

Wienerberger Ltd

Wienerberger House,

Brooks Drive,

Cheadle Royal Business Park,

Cheadle,

Cheshire

SK8 3SA

For the attention of Chris Hornby

Dear Chris,

Further to our meeting I would like to bring to your attention that Baumit UK have changed some of the product names shown in our catalogue to fall in line with changes made within the Baumit Group of standardisation of materials, therefore the documents enclosed are the changes Baumit UK will be adopting for products and their descriptions in 2015.

I note that the your letter from the NHBC dated the 17th November 2011 has some of the older product names written in as Baumit products, therefore I would like to confirm the change of name against these products as being:

• Baumit MPA X Therm and Baumit MineralPor as now being called Baumit MP69• Baumit ThermoPutz as now being called Baumit MP69 Speed

In addition Baumit UK no longer support Baumit Unico Bio and Baumit MPA 35, therefore these twoproducts should be removed from the NHBC reference against base coat renders shown in their letter of the 17th November 2011.

All products remain the same in application, it’s just product names that have changed. Other products and product descriptions remain the same as shown in the letter from the NHBC dated the 17th November 2011.

Should you have any further requirements please do not hesitate in contacting me.

Yours sincerely

C Dewhirst

Baumit UK Ltd 4200 Waterside Centre Tel: +44 (0) 333 358 3434 Solihull Parkway Birmingham Business Park Birmingham B37 7YN Website: www.baumit.co.uk Email: [email protected] Registered Office: One Fleet Place, London EC4M 7WS, Incorporated in England & Wales, Co. Reg. No. 7966190

Baumit MP69 Renders Range for Porotherm External Masonry System

MP69 - Baumit 2 Coat System for Standard Exposure External Render

Block Type Lambda Value λ Pre-Treatment Base Render Primer Ready Mixed Top Coat Mineral Top Coat with Paint Finish

Porotherm - PTH 100 0.29 W/mK Not Required MP69 DG27 PrimerNanoporTop/GranoporTop/SilikonTop CreativeTop

Baumit SEP/KRP Jura with Baumit Life Paint





Porotherm - T 12 0.12 W/mK Not Required MP69 DG27 Primer NanoporTop/GranoporTop/SilikonTop CreativeTop


Porotherm - T 10 0.10 W/mK Not RequiredMP69 with StarTex Mesh

embedded into MP69DG27 Primer NanoporTop/GranoporTop/SilikonTop

CreativeTopBaumit SEP/KRP Jura with Baumit Life Paint










** Please Note. When using Baumit Ready Mixed Top Coats <2mm Grain Size, there may be a need to add a layer of MC55W with StarTex Mesh to the surface.. Please check with Baumit UK

MP69 Speed - Baumit 2 Coat System for Standard Exposure External Render

Block Type Lambda Value λ Pre-Treatment Base Render Primer Ready Mixed Top Coat Mineral Top Coat with Paint Finish

Porotherm - PTH 100 0.29 W/mK Not Required MP69 Speed DG27 PrimerNanoporTop/GranoporTop/SilikonTop CreativeTop






Porotherm - T 12 0.12 W/mK Not Required MP69 Speed DG27 PrimerNanoporTop/GranoporTop/SilikonTop CreativeTop










** Please Note. When using Baumit Ready Mixed Top Coats <2mm Grain Size, there may be a need to add a layer of MC55W with StarTex Mesh to the surface.. Please check with Baumit UK

Baumit 3 Coat System for Severe or Very Severe Exposure External Render

Block Type Lambda Value λ Pre-Treatment Base Render/Additional Coat Primer Ready Mixed Top Coat Mineral Top Coat with Paint Finish

Porotherm - PTH 100 0.29 W/mK Not RequiredMP69/MP 69 Speed with

MC55W/StarTex Mesh additional layer

DG27 PrimerNanoporTop/GranoporTop/SilikonTop CreativeTop










Porotherm - T 12 0.12 W/mK Not RequiredMP69/MP 69 Speed with




Porotherm - T 10 0.10 W/mK Not RequiredMP69 Speed with

MC55W/& StarTex Mesh additional layer















Please Note: Other Baumit Products can be used with the above materials.. Please Contact Baumit to discuss your requirements.

Baumit UK Ltd4200 Waterside Centre UK Tel: +44 (0)333 358 3434Solihull Parkway

Website: www.baumit.co.ukEmail: [email protected]

Birmingham Business Park Birmingham B37 7YN

baumit ewi & render systems for porotherm masonry products

Documents