bathroom electrical safety presentation
TRANSCRIPT
![Page 1: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/1.jpg)
DFC Bathroom Electrical Safety
Electrical Safety and Bathroom Design
Presentation by…
Mark ThompsonOccupational TherapistDomiciliary Care SA
![Page 2: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/2.jpg)
Session Overview
Welcome and introductionsElectrical risk backgroundAS3000 – electrical installationsDrainage and water damageSlips and fallsClient factorsAssessment principlesRisk analysisManaging riskPractical exerciseScenarios and general discussionRelevant documentsReferences
![Page 3: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/3.jpg)
Electrical risk background
Home modifications and electrical risk
When recommending the following modifications:Installation of flexible shower hose.Removal of shower screen.Use of plug-in rubber hoses.
There is a need to consider:The risk of injury to client/carer/staff.Damage to property.
![Page 4: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/4.jpg)
Electrical risk background
The body and electricity
The body will conduct electricity (Bikson, 2004).
An electric current will flow through the body if it makes contact with both an electrically ‘energised’ surface and another surface of different potential (‘ground’).
![Page 5: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/5.jpg)
Electrical risk background
Current through the body
The actual current flow through the body will depend on body resistance (age, weight), resistance at the contact point (wet, live wire) and voltage (ETCI, 2007).
The presence of moisture from environmental conditions increases the possibility of a low voltage electrocution.
Under dry conditions, the resistance offered by the human body may be as high as 100,000 Ohms. Wet or broken skin may drop the body’s resistance to 1,000 Ohms
(NIOSH, 1998)
![Page 6: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/6.jpg)
Electrical risk background
Electric current and injury
Current around 7mA – ‘let go level’ – muscles are able to release. Above this level, muscle will spasm.
Current around 50mA – ‘fibrillation level’ – heart fibrillation is likely to occur.
Domestic RCD (Residual Current Device) are activated at 30mA.
(ETCI, 2007)
![Page 7: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/7.jpg)
Electrical risk background
Electric shock
Electric shock or electrocution can occur through direct contact with current carrying parts or indirect contact with energised conductive parts.
A wet bathroom power socket or switch is a potential source of indirect contact.
![Page 8: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/8.jpg)
Electrical risk background
How electricity use is made safe
Isolation of live parts (modern sockets – live parts are concealed within the socket and are fitted with shutters).
Insulation of live parts (electric wires and cables are usually covered with plastic insulation).
Earthing (large metal devices – fridge, washing machine, stove are all connected to earth to prevent them from becoming live and dangerous to touch).
(ETCI, 2007)
![Page 9: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/9.jpg)
Electrical risk background
Step voltage
Water entering a socket can interfere with the isolation of live parts.
The wet wall can allow current to ‘leak’ from the socket.
The wet wall has become ‘live’ (a source of indirect contact).
240V
190V
140V
![Page 10: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/10.jpg)
Electrical risk background
Electrical safety
The primary principle of managing electrical risk in bathrooms is to prevent the entry of water into switches/sockets/devices.
The Australian Standard 3000 – Electrical Installations, provides rules for wiring in areas containing baths, showers and other fixed water containers.
All new electrical work must comply with AS3000. The standards apply to electricians performing electrical work.
![Page 11: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/11.jpg)
Electrical risk background
Electrical safety continued…
Many homes were built before the current regulations were in place and have been built to other specifications.
Occupational Therapists do not have to ensure that bathrooms comply with the standards. Instead, AS3000 should be used as a guide in the management of risk.
![Page 12: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/12.jpg)
AS3000 – Electrical Installations
Wiring rules
Section 6 – Damp situations
Lists requirement for locations subject to the effects of water or high humidity: Classification of Zones Guidance on selection of electrical equipment
![Page 13: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/13.jpg)
AS3000 – Electrical Installations
Zones – to determine risk
AS3000 requirements for baths and showers are based on 4 Zones. They take into account: Walls Ceilings Floors Barriers (i.e. screens, doors, curtains and fixed
partitions)
![Page 14: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/14.jpg)
AS3000 – Electrical Installations
Zone 0
The interior area of the base of the bath or shower.
Zone 0 Zone 0
![Page 15: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/15.jpg)
AS3000 – Electrical Installations
Zone 1
BATH – extends from the internal rim of the bath above Zone 0 to 2.5m above rim or ceiling.
SHOWER OVER BATH – extends 1.2m radius from the shower fixed plumbing connection (X). Height to 2.5m (from floor) or ceiling.
1.2m
Zone 1
1.2m2.5m
Zone 0
![Page 16: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/16.jpg)
AS3000 – Electrical Installations
Zone 1 continued…
SHOWER – extends 1.2m radius from the shower fixed plumbing connection (X). Height to 2.5m or ceiling.
X
1.2m1.2mZone 1
Zone 0
2.5m
![Page 17: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/17.jpg)
AS3000 – Electrical Instsallations
Barrier
A barrier of a height of 1.8m or the height at which the shower connection is made to the fixed plumbing, whichever is the greater, may be used to reduce the 1.2m dimension of Zone 1.
![Page 18: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/18.jpg)
AS3000 – Electrical Instsallations
Fixed Barrier vs. Barrier
A ‘fixed barrier’ offers greater protection against water splash than a ‘barrier’ and is treated differently in the regulations.
Fixed barrier: a tiled wall, a fixed glass screen with waterproofed seal.
Barrier: sliding glass door, curtain.
![Page 19: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/19.jpg)
AS3000 – Electrical Installations
Fixed barrier Height of 1.8m or the
height at which the shower connection is made to the fixed plumbing, whichever is the greater, may be used to reduce the 1.2m dimension of Zone 1.
Zone 1 continues beyond the end point of fixed barrier (not along edge of barrier).
Zone 1
FixedBarrier
1.2m
22.25m
0.6m
![Page 20: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/20.jpg)
AS3000 – Electrical Installations
Barrier
E.g. Shower curtain, hinged/sliding door.
Same height requirements as fixed barrier.
Zone 1 ends along the edge of barrier. Zone 2
Zone 1
0.6m
Barrier
![Page 21: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/21.jpg)
AS3000 – Electrical Installations
Barrier continued…
Pulling the curtain across has reduced the extent of Zone 1.
Zone 1 ends at the edge of the curtain.
X
1.2m
Zone 0
Zone 1
2.5m Barrier
![Page 22: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/22.jpg)
AS3000 – Electrical Installations
Zone 2
0.6m beyond end of Zone 1.
2.25m above floor level. Zone 1
Zone 2
0.6m1.2m
1.2m
2.25m
X
2.5m
0.6m
![Page 23: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/23.jpg)
AS3000 – Electrical Installations
Zone 2 continued…
Note the difference between a fixed partition and a barrier.
Zone 2 is the area limited by the parallel vertical plane external to Zone 1.
0.6m
Zone 1
Fixed partition
Barrier
3
0.6m
![Page 24: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/24.jpg)
AS3000 – Electrical Installations
Zone 3
2.4m beyond Zone 2
2.5m above floor level.
NOTE: The zones do not extend beyond the boundaries of the room.
In this example, Zone 1 is contained within the alcove and is the same size as Zone 0.
Zone 1
Zone 2
Zone 3
2.4m
2.5m
Barrier
![Page 25: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/25.jpg)
AS3000 – Electrical Installations
The modification of a bathroom may change the zones and increase exposure to risk of electrocution.
The removal of a shower screen = the removal of a barrier/partition.
The installation of a flexible shower hose can increase the direction and distance of water spray.
![Page 26: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/26.jpg)
AS3000 – Electrical Installation
Removal of screen (barrier)
Note that zones now extend further.
Need to check location of switches, sockets and devices.
Zone 2
Zone 3 2.4m
1.2m
X
0.6m
2.25m
2.5m
Zone 1
![Page 27: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/27.jpg)
AS3000 – Electrical Installations
Plug-in rubber hose Showering client on
mobile chair over floor drain.
The whole nature of the bathroom has changed.
Electrical outlets would need to be covered.
Zone 1 is approximately a 1.2m radius around the position where the client is showered.
Zone 1
![Page 28: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/28.jpg)
AS3000 – Electrical Installations
Power points near basins
Why are power points allowed in bathrooms above hand basins?
The requirements for fixed water containers (other than baths and showers) is based on two zones.
For containers not exceeding 45L – illustrated in figure 6.10 (following slide).
![Page 29: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/29.jpg)
AS3000 – Electrical Installations
Zones around basins
Zone 2 extends 0.4m above basin and 0.15m vertically from the rim.
Attaching a hose to taps or a spout changes the nature of the water container.
Switches that meet the electrical code now present risk of electrocution due to changed use.
Zone 0Zone 2
0.4m
0.15m
![Page 30: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/30.jpg)
AS3000 – Electrical Installations
All switches, sockets or devices should be located 30cm above ground level in all zones.
Plug in devices such as heaters should not be situated on bathroom floor during showering.
30cm
![Page 31: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/31.jpg)
AS3000 – Electrical Installations
Splash factors – curtain open
Leaving a door or curtain partly open can extend the zones through the opening.
In the example given, if the curtain is left open while a client showers, Zone 1 extends out into the bathroom.
The light switch falls into Zone 2. NOTE: a worker standing in the
doorway will limit the amount of splash exiting the shower and, therefore, reduce the dimensions of Zone 1.
900 1000
Zone 1
Zone 2
shower
Lightswitch
Shower Curtain Open
fixed plumbing outlet
![Page 32: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/32.jpg)
AS3000 – Electrical Installations
Installation guidelines
The following slides provide information on installation rules for electricians:
Socket outlets Switches Luminaries (lights)
![Page 33: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/33.jpg)
AS3000 – Electrical Installations
Socket outlets
Not permitted in Zones 0 and 1. Not permitted in Zone 2 unless:
(a)Shave outlet(b)RCD protected in a cupboard
In Zone 3 RCD protected
RCD = Residual Current Device
(Safety Switch)
Located at the switchboard
![Page 34: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/34.jpg)
AS3000 – Electrical Installations
Socket outlets – Zone 3 and RCD’s
In a house that does not have an RCD and has a socket outlet in Zone 3, is there a need for an RCD to be installed?
RCD’s have only been mandatory in new or rewired houses since 1991. There are tens of thousands of houses that were built prior to 1991 and hence, without RCD’s. The main issue is a duty of care to ensure that water is not sprayed into the socket outlets.
![Page 35: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/35.jpg)
AS3000 – Electrical Installations
Switches Not permitted in Zone 0. Zone 1 and 2 – IPX4 rated device. Zone 3 – no rating.
IP = Ingress Protection Rating The first digit refers to solid foreign
objects. The second digit refers to water
protection. IPX4 = protection against splashing
and spraying water from all practicable directions.
![Page 36: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/36.jpg)
AS3000 – Electrical Installations
IP rated switch
Example…
HPM Excel Range Weatherproof SwitchGeneral purpose light switching, fan motors, power and lighting circuits.
IP56 – dust protected. Strong-jet hose proof.
![Page 37: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/37.jpg)
AS3000 – Electrical Installations
Luminaries (lights)
In Zone 1 – IPX4 In Zone 2 IPX4 or Class II (enclosed) -
that require the removal of a cover to access lamps or extra low voltage or recessed into ceiling.
Zone 3 – no rating.
NOTE: a batten holder is not a Class II luminary.
![Page 38: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/38.jpg)
Drainage and Water Damage
General
Bathroom modifications may alter the control of water splash and drainage.
Older homes may not be compliant with modern standards for drainage.
Planning SA have technical specifications for ‘Waterproofing of wet areas in buildings – 2004’.
These guidelines are useful to consider when planning modifications that may increase splash.
![Page 39: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/39.jpg)
Drainage and Water Damage
Unenclosed showers
When the spread of water from the shower supply outlet is not controlled where there is: No shower screen (or) Partial enclosure by shower screen (or) A shower curtain (or) A frameless glass shower screen.
Then the shower area extends 1.5m from the shower supply outlet at the wall.
![Page 40: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/40.jpg)
Drainage and Water Damage
Summary of factors
Floor damage.
Floors to be water resistant.
Walls to be water resistant.
Wall to floor junctions and other joins.
![Page 41: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/41.jpg)
Drainage and Water Damage
Floor waste
Drainage of a wet area floor must be provided to a floor waste or un-trapped floor drain for: Bathroom Area adjacent to baths and spas Room containing a shower Room containing a sanitary fixture
![Page 42: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/42.jpg)
Drainage and Water Damage
Falls to floor
The floor must drain so that water does not pond on the floor.
![Page 43: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/43.jpg)
Drainage and Water Damage
Floors and walls water resistant
Floors and walls must have a water resistant substrate and a water resistant surface.
Wall to floor junctions need to be sealed.
Junctions between bench tops need to be sealed.
Not carpet or bare floor boards.
![Page 44: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/44.jpg)
Slips and Falls
Slipping risk
Has the bathroom modification increased the amount of water splash onto the bathroom floor?
Who will dry the floor after use?
What anti-slip mats are available?
Is the bathroom floor surface non-slip?
![Page 45: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/45.jpg)
Client Factors
Cognitive and planning deficits may impact on safety.
Physical factors (strength/ coordination) may limit client’s ability to maintain control.
Consider compliance with the following instructions for safe use.
![Page 46: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/46.jpg)
Assessment Principles
1. Locate the position of all electrical switches, sockets and devices in the bathroom.
2. Take measurements of distance from fixed plumbing outlet (FPO) to electrical devices/ outlets.
3. Identify barriers – currently in place/to be removed/to be replaced.
4. Have zones changed as a result of removal of barriers or changed use of the bathroom?
![Page 47: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/47.jpg)
Assessment Principles
Assessment principles continued…
5. Check measurements and proposed modifications against the standards.
6. Zones 1 and 2 are priority.
7. Identify risk management strategies to prevent water entering electrical outlets.
8. Communicating strategy to others.
![Page 48: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/48.jpg)
Risk Analysis
Electric shock The likelihood of electric shock from water spray
or condensation entering electrical outlets is rare. The consequences of this happening are major. This results in a moderate level of risk requiring effective controls.
Slips and falls The likelihood of water splash on floors leading to
slips and falls is possible and the consequences are major. This results in a high level of risk and is an issue that has been regularly addressed by Occupational Therapists.
![Page 49: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/49.jpg)
Managing Risk
A procedure on ‘Bathroom Electrical Safety’ has been developed based on advice provided by the Office of the Technical Regulator (OTR) (Department for Transport, Energy & Infrastructure, Government of SA) and risk analysis performed by Domiciliary Care SA clinical staff.
![Page 50: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/50.jpg)
Managing Risk
Key principles
Key principles of ‘Bathroom Electrical Safety’ procedure for managing risk:Use alcove or bath wherever possibleUse barriers and seal sockets and switchesControl water spray:
Direct spray away from sockets Assistant to maintain control
Use exhaust fansClient/carer/staff instruction – Information SheetsDocumentation
![Page 51: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/51.jpg)
Managing Risk
Temporary vs. Permanent changes
Showering over a floor drain: Change of use of the bathroom Usually only performed by a carer or care attendant Can manage risk through temporary measures – taping
plastic sheet
Removing a shower screen: Permanent change to the room itself Possibility of visitors to house not being aware of
additional safety procedures Best option – disconnect outlets or modify switches to
waterproof
![Page 52: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/52.jpg)
Managing Risk
Use alcove or bath
Wherever possible, showering should occur in an alcove or over a bath.
This practice makes best use of existing facilities (barriers, waterproofing, drainage) and minimises electrical risk.
![Page 53: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/53.jpg)
Managing Risk
Use barriers
Barriers should be used to control water spray and splash – close curtain or alcove doors as far as is practical during use, if carer/worker assisting.
Avoid removing fixed barriers unless absolutely necessary.
![Page 54: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/54.jpg)
Managing Risk
Effective seals
Use an effective seal to cover switches and sockets exposed to water splash.
Situations requiring electrical outlets to be covered include: Leaving a barrier open Using a plug-on hose Showering outside an alcove over a bathroom floor drain
An effective seal is a 600x600mm plastic sheet taped along its top edge covering the electrical outlet.
NOTE: the smaller the sheet, the more watertight the taping needs to be.
![Page 55: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/55.jpg)
Managing Risk
Effective seals continued…
Switches/sockets covered with a plastic sheet.
The switch should be positioned under the centre of the sheet.
Tape along the top edge.
![Page 56: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/56.jpg)
Managing Risk
Control water spray
Maintain control of the hose during use. Worker to control hose if client unreliable.
Do not use hose with water pressure on full.
Do not leave the hose dangling. Direct water spray away from
switches/sockets/ devices. Clamp ‘plug-on’ rubber hoses and
cover with a hand towel.
![Page 57: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/57.jpg)
Managing Risk
Control condensation
Use exhaust fan when available. Otherwise, open a window or
door.
The risk is from steam condensing on walls and running down into electrical outlets.
Heat the bathroom before showering on cold days.
![Page 58: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/58.jpg)
Managing Risk
Client/carer instruction
Clients/carers and staff should be provided with written advice on use of flexible hoses and risk factors (electrocution, slipping, water damage).
The shower hose should not be used outside the shower area (e.g. to wash bathroom walls) unless the bathroom has been assessed for showering over a floor drain.
![Page 59: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/59.jpg)
Managing Risk
Staff information
Staff providing personal care services should be provided with written information on managing electrical safety.
If any issues are identified, a Hazard Form should direct workers to read specific instructions written in the Service Plan.
![Page 60: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/60.jpg)
Managing Risk
Documentation
Location and measurements of: Switches/sockets/devices Barriers
Procedure for safe practice: Hazard form Service plan
![Page 61: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/61.jpg)
Managing Risk
Interim measures
In the circumstances where no safe alternative exists and electrical modifications are needed prior to the commencement of showering services:
Sponge wash.
Client to undertake electrical modifications.
If client unable to pay, refer to local council (certain councils only), or access donation fund.
![Page 62: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/62.jpg)
Practical Exercise
Use bathroom templates to build a typical bathroom.
Layout the boundaries of Zones 1, 2 and 3 in the bathroom.
Check the location of switches and sockets. Sketch bathroom layout and Zone boundaries. Remove the barrier around your alcove and
measure the dimensions of each Zone. Measure the Zones if you were to use a plug-in
hose from the basin. Make a note of any safety measures needed.
![Page 63: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/63.jpg)
Scenarios and General Discussion
fixed plumbing outlet
900 600
shower
Lightswitch
2300
Powerpoint
900
1800
wc
FixdPanel
Scenario 1
Client independent on static shower chair.Door closed (sliding door with fixed panel adjacent wall).Hand-held shower hose is to be installed.What issues need to be considered and what recommendations need to be made?
![Page 64: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/64.jpg)
Scenarios and General Discussion
900 600
shower
Lightswitch
2300
Powerpoint
2
3
1
900
1800
0.6m
Scenario 1
Door Closed
Sliding door with fixed panel adjacent wall
![Page 65: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/65.jpg)
Scenarios and General Discussion
900 600
shower
Lightswitch
2300
Powerpoint
900
1800
wc
FixedPanel
Scenario 2Client assisted on static shower chair.Door partly open.There is a hand-held shower hose in the alcove.What issues need to be considered and what recommendations need to be made? In particular, the care attendant assisting the client through a partly open door.
![Page 66: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/66.jpg)
Scenarios and General Discussion
900 600
shower
Lightswitch
2300
Powerpoint
2 3
1
900
1800
0.6m
Scenario 2
Door Open
![Page 67: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/67.jpg)
Scenarios and General Discussion
1200900
shower Lightswitch
450
Powerpoint
fixed plumbing outlet
SlidingDoor
450
1200
FixedPanel
curtain
Scenario 3
Glass sliding door & panel removed. Fixed panel was adjacent. Client on mobile shower chair and is assisted by care attendant.Explain what you would do in this situation to address safety issues.
![Page 68: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/68.jpg)
Scenarios and General Discussion
1200900
shower
Lightswitch
450
Powerpoint
Doorremoved
450
1200 1
230.6m
fixed plumbing outlet curtain
Scenario 3
Curtain open from ‘side’ opposite taps.
![Page 69: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/69.jpg)
Scenarios and General Discussion
1200900
shower
Lightswitch
450
Powerpoint
Doorremoved
450
1200 1
2
30.6m
fixed plumbing outlet curtain
Scenario 3
Curtain open from ‘side’ adjacent shower outlet.
![Page 70: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/70.jpg)
Scenarios and General Discussion
1600
2000
1700
1500
Lightswitch
Powerpoint
bathboard
fixed plumbing outlet
Scenario 4
Client showering seated on a bathboard using a shower hose attached to the shower fixed plumbing outlet.There is a powerpoint and a light switch in the room.Explain what you would do in this situation to address safety issues.Consider the effect of a shower curtain in this situation.
![Page 71: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/71.jpg)
Scenarios and General Discussion
1600
2000
1700
1500
Lightswitch
Powerpoint
bathboard
fixed plumbing outlet
1
1.2m
2
3
1
Scenario 4
Client seated on bathboard.Without Curtain.
![Page 72: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/72.jpg)
Scenarios and General Discussion
1600
2000
1700
1500
Lightswitch
bathboard
1
1.2m2
3
3
Powerpoint
0.6m
1
fixed plumbing outlet
Scenario 4
Client seated on bathboard.Curtain partly drawn.
![Page 73: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/73.jpg)
Scenarios and General Discussion
Lightswitch
Powerpoint
1500
2000
1700
fixed plumbing outlet
500Scenario 5
Client with limited mobility showers seated on a mobile shower chair.There is limited space in the bathroom (shower over bath).The only option is for client to be showered over floor drain.A plug on hand held shower hose is used from basin.There is a powerpoint and a light switch in the room.What are the safety measures you would need to take before starting this service?
![Page 74: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/74.jpg)
Scenarios and General Discussion
Lightswitch
Powerpoint
1500
2000
1700
fixed plumbing outlet
500
Zone 1
Scenario 5
The nature of the basin has been changed by attaching a plug-on hose.By showering over the floor drain, all switches and powerpoints in the room need to be considered as falling in Zone 1.Cover the powerpoint and light switch prior to showering.
![Page 75: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/75.jpg)
Scenarios and General Discussion
Questions?
Comments?
![Page 76: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/76.jpg)
Relevant Documents
DFC Bathroom Electrical Safety
Principles for Managing Electrical Safety in Bathrooms
Electrical Safety and Bathroom Design – 7 scenarios
Client Information Sheet
Care Worker Information Sheet
![Page 77: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/77.jpg)
References
Bikson, M (2004) A review of Hazards associated with exposure to low voltages. City University of New York
Electro-Technical Council of Ireland (ECTI) (2007). Effects of Electricity on the Human Body. Website.
National Institute for Occupational Safety and Health (NIOSH). (1998). Worker Deaths by Electrocution.
Australian Standard AS3000. (2003). Electrical Installations (Australian/New Zealand Wiring Rules).
Acknowledgements: Office of the Technical Regulator. Department for Energy,
Transport and Infrastructure (Government of South Australia)
![Page 78: Bathroom Electrical Safety Presentation](https://reader035.vdocuments.us/reader035/viewer/2022081417/553035df4a7959372c8b4699/html5/thumbnails/78.jpg)
DFC Electrical Bathroom Safety
Thank you for attending this session.
If you have any further queries or feedback, please contact:
Mark Thompson, Occupational TherapistDomiciliary Care SAPH: 8304 6146Email: [email protected]