bat catalog - contour

BAT Inc.British American Transfer Inc.7630 Matoaka RoadSarasota, FL 34243phone (941) 355-0005fax (941) 355-4683www.batinc.net

>>> CATALOG LAST UPDATED <<<>>>>>>>>>> 06/17/04 <<<<<<<<<<<

PERFORMANCE & SERVICE

PARTS GUIDEContour / SVT / Cougar / Mystique / Mondeo

Ford Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........by

BAT Inc. 7630 Matoaka Road. Sarasota, FL 34243 (941) 355-0005 fax (941) 355-4683

BAT is very pleased to offer this line ofcomponents for the U.S.A. specificationContour, Mystique, SVT, Cougar and otherEuropean models of the Ford Mondeo lineage.This literature highlights a product line that weexpect will expand considerably as productdevelopment continues over the next year. Onthe next page you will find a helpful table ofcontents, which we will use this to make youaware of when each section was last updatedand the status of each section until fullcompletion. Although this catalog is not fullyyou will still find more unique components foryour car than from any other source, andmost are in stock for immediate shipment.

BAT is a recognized Ford MotorsportUSA and Ford Motorsport/RallysportEuropean dealer with over 30 years ofexperience of tuning European Fordautomobiles. From Cortinas, Lotus Cars andAnglias during the 60's through the 70's withPinto and Capri and into the 80's and 90's withFiesta, Escort, Merkur and now Contour. Ourexpertise with building and racing 4 & 6 cylinderFord powered cars includes Formula Ford,Formula Continental & Atlantic, SCCAProduction, Showroom Stock, Auto-X, ImprovedTouring and Circle Track racing classes. Wehave a highly capable staff and you canconfidently allow them to handle even your mostdifficult technical needs. Better still, our abilityto buy in quantity, import products directly, andmanufacturer speciality components assuresyou are getting the right parts at the right price.



UNDERCONSTRUCTION

3

>>>> CONSTRUCTION ZONE <<<<

This whole catalog is a work in progress. Some sectionsare close to completion and others are just under way.Tune in here for updates and information on pendingparts & projects relating to part sections listed below.

section page#'s last updated % completed

CONSTRUCTION SCHEDULE:

Brake Components 4-10 04/20/04 90%

Suspension Components 11-19 03/01/03 90%(pending: more urethane bushings, varrious items under development)

Road Wheels 20-21 04/17/04 90%

Engine Components 22-32 08/07/03 80%(varrious items under development)

Exhaust Components 33-34 05/99/03 80%(varrious items under development)

Drivetrain Components 35-36 01/27/04 50%(future items: replacement drive axles, C.V. joints & boots)

Lighting & Electrical 37-40 06/20/03 75%(future items: Euro headlamps, quad headlamp kits, Euro Cougar 3 color tail lamps)

Interior/Exterior Items 41-45 03/02/04 50%(varrious items under development)

Current Specials 46-47 04/17/04 100%


Front Brake TECH

Contour/Mystique (1995-2000) 4 and 6 cylindercars are all equipped with 260 x 24mm front rotorsand standard size ATE calipers.Upgrades: Mintex pads with either standardor cross-drilled rotors are the least expensiveperformance upgrade. Another option wouldbe to bolt on the Cougar or SVT brake set-up, however, this requires buying calipers androtors (expensive). A better option is ourR/S big brake kit which allows for fitting thelarger 278mm SVT type rotors with the standardcaliper. We supply the required brackets andhardware with cross-drilled rotors and highperformance Mintex 1144 pads.

SVT (1998 to 5/1999) cars are equipped with larger 278 x 24mm front rotors and larger ATE calipersand pads than standard Contours. This brake arrangement is similar to what some of the 4WDMondeos and other Cosworth powered Ford cars used in Europe.Upgrades: Mintex pads with either standard or cross-drilled rotors are the least expensive performanceupgrade. We are also working on 4 piston caliper upgrades for use with the standard 278mm rotors aswell as 300mm large rotor and caliper brake kits.

SVT (after 5/1999) also equipped with larger 278mm front rotors but withCougar calipers that utilize the slightly smaller standard Contour pads(read Cougar below).Upgrades: Mintex pads with either standard or cross-drilled rotors are theleast expensive performance upgrade. Another option is to fit the earlySVT calipers and pads, again - expensive (although we hope to have a morereasonable source for the early calipers in the future) We also have 4 pistoncaliper upgrades for use with the standard 278mm rotors as well as 300mmlarge rotor and caliper brake kits.

Cougar (1999-2000) are a combination of standard Contour and SVT brakes.They use the larger SVT 278 x 24mm rotors but with the standard Contoursmaller size ATE caliper using a slightly different caliper mounting bracket toclear the larger rotors diameter. So Cougars benefit from having largerdiameter rotors for increased braking leverage but do not have the largerpad/caliper combo from the earlier SVT. One would think this was a Fordcost cutting measure as the big calipers are quite expensive.Upgrades: Mintex pads with either standard or cross-drilled rotors arethe least expensive performance upgrade. Another option is to fit the

early SVT calipers and pads, again...expensive and really not much of a benefit. We also have 4piston caliper upgrades for use with the standard 278mm rotors as well as 300mm large rotorand caliper brake kits.


BAT offers the Mintex line of highperformance brake products

M1144

123456789012123456789012123456789012123456789012123456789012

4


Ford Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........by 5

CONTOUR/MYSTIQUE (all),COUGAR (all), SVT (from 5/99)

actual sizescale 1:1

Brake CompoundsMintex 1144 is a rally/race compound is perfectly at home on track or street offeringa high coefficient of drag (.44) and excellent modulation throughout a very widetemperature operating range (up to 1200 degrees). Mintex 1144 is unmatched interms of wear and fade characteristics with excellent "pedal feel". This is the brakecompound many European rally teams have used for years. No other brake relatedupgrade will yield as much bang for the buck as upgrading to M1144 pads. Suppliedpre-burnished for easy break-in. For maximum effect match a set of Mintex 1144'swith our premium drilled sport rotors and Aeroquip stainless brake lines.

Mintex A/F Brake Pads are the highest quality, best performing, standard replacementpads available for Contour cars. Mintex brand A/F "Abestos Free" semi-metallic liningsoperate over a wide temperature range with very little fade or brake dusting. These basicMintex "street" pads actually outperform other manufacturers "performance" pads(most notably) PBR/Axis Metal Master a recent national magazine test. In the under$50.00 a set category Mintex A/F has everything beat. European E1/90 approved.

Hardware Kits BAT can supply a full range of brake hardware for the ATE type front calipers(slide pins, bushings, load springs) see next page for front brake parts listing.

Front Brake Pads 95-2000 (all Contour, Cougar & SVT after 5/99) -see pad drawing below for assistance

Front Pad Set Mintex A/F K420AF $39.95Front Pad Set Mintex 1144 K420G $99.50

Front Brake Pads 98-99 (most SVT's before 5/99) Note: we have seen examples of cars produced before5/99 that are fitted with the late type pad (see above). Check the pad drawings carefully before ordering.

Front Pad Set Mintex A/F K417AF $44.50Front Pad Set Mintex 1144 K417G $129.50

SVT (up to 5/99) ONLY (SVT E0 & some E1)




Front Brake HardwareWe carry a full line of replacement brake hardware for the ATE Teves type front calipers used on the Contour.This single piston sliding pin design is popular with many foreign car manufacturers (BMW, Ford, VW), and forthe most part is pretty foolproof, however they have been known to have occasional problems- usually hardware

related as we will cover below. Caliper Slide Pins can be a problem when thepins become rusty or pitted and does not move freely within the bushing.Inspect the pins finish and replace as needed. Caliper Bushings are

made of rubber and are sensitive to heat causing less than optimal pinbushing clearance which has been known to cause a slight vibration(usually felt through the brake pedal) when the brakes are appliedlightly. Sometimes customers are convinced the brake rotors arewrapped when only the caliper bushings require replacement. Weusually recommend refreshing the caliper bushings when changing

pads to keep everything optimized. Caliper Springs serve both tolocate and tension the caliper/pad assembly as well as anti-rattle duty. They

usually hold up pretty well as long as they don't get bent up too badly or lost on removal. We don't usually replacethem with every pad change, rather every other- say 60,000 miles or so. All parts packaged to service 1 caliper,two of each part are required to both sides.

Caliper Slide Pins (2) -all Contour, SVT, Cougar M420CP $16.25Caliper Bushings (2) -all Contour, SVT, Cougar M420CB $14.00Caliper Spring (1) -all except E0 SVT K420K7 $6.25Caliper Spring (1) -E0 SVT only K420K7A $8.50

&BRAKES

Brake Special (cars with 260mm front & 253mm rear) K420SP $189.00all Contour & Mystique -except SVT

Brake Special (cars with 278mm front & 253mm rear) K420SPA $245.00SVT (specify if E0) and Cougar

Brake Kits with EBC Sport Rotors (Grooved & Dimpled) & Mintex A/F PadsThese kits include 2 rotors and a pad set, available front or rear -sold seperately.

Front Brake Kit (260mm) Contour/Mystique i4 Cougar K420FG $195.00Front Brake Kit (278mm) SVT (specify if E0) & V6 Cougar K420FGA $225.00Rear Brake Kit (253mm) all with rear disk K420RG $195.00

Complete 4 Wheel Brake Kits (Front & Rear)

Brake SpecialsCustomers often comment about the great prices we offeron our high quality brake components. We would evenlike to go a step further. For anyone interested in buyingfront and rear rotors and pads at the same time we havean even better deal. We will supply front and rear Europeanspecification brake rotors (by AP Lockheed or EBC)matched with premium Mintex A/F brake pads (again bothfront and rear) all for one low price. Shop around and youwill find we have the lowest price in the nation on a full setof rotors and pads and we supply quality components notthe typical low end "brand x" parts offerd by others.

kits include premium brake rotors by

EBC

NEW


7

Rear Brake TECH

Rear brakes on the Contour/Cougar cars can also be confusing. If your 1995-2001car is rear disk equipped they are 253 x 20mm vented rotors and all use one sizerear pad. Rear drum equipped 1995-96 cars are equipped with 203 x 38mm (8")rear drums, but 1997-2001 cars are a mix of the 203 x 38mm (8") and larger 228 x45mm (9") drums. This is probaibly a manufacturing supply issue when the carswere built and the only way to determine which rear drum/shoe set is on youcar is to check before ordering parts. Performance upgrades for rear diskequipped cars would be to go with the Mintex pads and cross-drilled rotorsand for rear drums upgrade to Mintex lined rear shoes.

Brake HardwareBAT can supply a full range of brake hardware components for the ATE type frontcalipers (slide pins, bushings, load springs) and also rear hardware kits for the drumbrake equipped cars.

Brake CompoundsMintex 1144 rally/race compound is perfectly at home on track or street offering a high coefficient of drag (.44) andexcellent modulation throughout a very wide temperature operating range (up to 1200 degrees). Mintex 1144 isunmatched in terms of wear and fade characteristics with excellent "pedal feel". This is the brake compound manyEuropean rally teams have used for years. No other brake related upgrade will yield as much bang for the buck asupgrading to M1144 pads. Supplied pre-burnished for easy break-in. For maximum effect match a set of Mintex1144's with our premium drilled sport rotors and Aeroquip stainless brake lines.

Mintex A/F Brake Pads are the highest quality, best performing, standard replacement pads available forContour cars. Mintex brand A/F "Abestos Free" semi-metallic linings operate over a wide temperature rangewith very little fade or brake dusting. These basic Mintex "street" pads actually outperform other manufacturers"performance" pads (most notably) PBR/Axis Metal Master a recent national magazine test. In the under 50.00a set category Mintex A/F has everything beat. European E1 / 90 approved.

REAR BRAKE COMPONENTSRear Brake Pads 95-2001 (all with rear disk) - see drawing belowRear Pad Set Mintex A/F K420AR $39.95Rear Pad Set Mintex 1144 K420GR $98.50Hardware Kit K420K6 $20.75

Brake Shoes (check rear drum size)8" Rear Brake Shoe Set Mintex A/F K420RA $39.50Rear Hardware Kit for 8" brakes K420K5A $25.009" Rear Brake Shoe Set Mintex A/F K420R $39.50Rear Hardware Kit for 9" brakes K420K5 $25.00


ALL WITH REAR DISK


(REAR)228 x 45mm (9")

OR203 x 38mm (8")

Shoe Size

drawing notto scale



&EBC

BRAKES

premium brakerotors by

RotorsBAT inventories a selection of rotors to satisfy both the performance mindedas well as the budget oriented customer.

Econo RotorsConsistent high quality that meets or exceeds all O.E. specifications, andalthough these rotors are inexpensive they are considerably better thanthe usual "white box" specials commonly found at discount parts stores.

Economy Brake Rotor (1995-2000 Contour/Mystique)Front Econo Rotor 260x 24mm K425 28.00ea.Rear Econo Rotor 253 x20mm K425R 25.00ea.

Premium European Rotors- Standard & Cross DrilledOur European Group-N rally specification rotors are made from "Carballoy"

(a medium flake graphite fully pearlitic low phosphorous iron)manufactured to BS 1452 - 1990 grade 180/220 standard. Which equatesto longer life with more resistance to warping which is so common withlesser quality (Ford as well as other offshore low budget type) rotors.Looking for more of an upgrade? Cross-drilling brake rotors is an

excellent way to increase brake performance. Theory being thatcentrifugal force will draw excess brake dust and expelled gassesfrom the pad surface through the drilled passages into the rotorsvented cavity and out. This process also improves rotor coolinggiving improved braking response and resistance to fade. The

cross drilling process is handled by computer CNC millingequipment with holes arranged in a parabolic pattern giving an even

sweeping effect to the pad surface ensuring maximum cooling withminimum noise and drag. All holes (drillings) are radiused to minimum

thickness then rotors are rebalanced as the final process.

Premium Front Brake Rotor 260 x 24mm (1995-2001 Contour/Mystique)Front Rotor- standard K425A $45.00ea.Front Rotor- Cross-Drilled* K425CD $89.95ea.Front Rotor-Grooved* (EBC Turbo Groove) K425G $79.00ea.Front Rotor- Drilled & Grooved Combo* K425DS $99.25ea.*drilled and drill/grooved rotors must by purchased as (handed) pairs- priced as each

Premium Front Brake Rotor 278 x 24mm (1998-2001 SVT & Cougar V6)Front Rotor- standard K426 $59.00ea.Front Rotor- Cross-Drilled* K426CD $139.00ea.Front Rotor-Grooved* (EBC Turbo Groove) K426G $95.00ea.Front Rotor- Drilled & Grooved Combo* K426DS $144.00ea.*drilled and drill/grooved rotors must by purchased as (handed) pairs- priced as each

Premium Rear Brake Rotor 253 x 20m m (all cars with rear disk)Rear Rotor- standard K425RA $45.00ea.Rear Rotor- Cross-Drilled* K425RCD $89.95ea.Rear Rotor- Grooved* (EBC Turbo Groove) K425RG $79.00ea.Rear Rotor- Drilled & Grooved Combo* K425RDS $95.00ea.*drilled and drill/grooved rotors must by purchased as (handed) pairs- priced as each



BAT / Wilwood Brake KitsWe are happy to announce the release ofour 4 piston caliper brake kits for the Contourand Cougar cars. These kits utilize highperformance Wilwood Bil let DynaliteCalipers with custom brackets and hardwarefor installation. At just 4 pounds the BilletDynali te (with bracket & pads) isconsiderably lighter than the standardcalipers 14 pound weight. This goes alongway to reducing "unsprung weight" benefitingboth braking and handling performance.Dynalite Billet calipers are alsoextremely rigid which directlytransfers torque withoutunwanted caliper flex and thelarger piston area equates tomore clamping force. Calipersare all aluminum constructionboth for weight savings andmaximum heat dissipation andare supplied in a attractive blackanodized finish with stainlesssteel pistons and hightemperature seals installed. TheDynalite series of calipers is alsovery well serviced by the brake pad market with literally dozens of pad/compound options available andpads change in seconds without the need to even remove the caliper (a big plus at the race track).

Kit Notes w/278mm rotor: Wheels of 15" or larger are required. Depending on brand of wheel, size/diameter, andoffset, a 5 to 10mm spacer may be required as the caliper may contact the wheel "spokes". Wheels in the 35 to40mm offset range are less prone to problems. We have checked the stock 16" SVT 5-spoke (49et) wheels for fitand they require spacers, but the ST200 & Focus SVT 17x7" (49et) wheels are no problem. Kit Notes w/300mm:Wheels of 16" or larger requited. Depending on brand of wheel (size/diameter & offset) a 5 to 10mm spacer maybe required as the caliper may contact the wheel "spokes". Wheels in the 35 to 40mm offset range are less proneto problems. None of the 49et wheels we have tested (ST200, 5-spoke SVT 16" & 17") fit without spacers.

BAT / Wilwood 4 Piston Caliper Kit* K416WC $459.00*For cars already equipped with 278mm SVT type rotors or customer supplies rotors. Kit includes calipers,pads, brake hoses & hardware.

BAT / Wilwood 4 Piston Brake Kit 278mm K416WK $589.00(includes standard 278mm rotors calipers, pads, brake hoses brackets & hardware)

BAT / Wilwood 4 Piston Brake Kit 278mm K416WD $735.00(includes cross drilled 278mm rotors, calipers, pads, brake hoses brackets & hardware)

BAT / Wilwood 4 Piston Brake Kit 300mm K416W3 $695.00(includes 300mm rotors, calipers, pads, brake hoses, brackets & hardware)

As with most aftermarket high performance brake kits "these brake kits are not D.O.T. certified" and even thoughthousands of similar brake kits are in safely in service on various makes and models of vehicles "they are designedfor off road use at customers own risk".


Large Rotor Brake Kits- FrontThese kits allow fitment of larger (278mm) SVT frontbrake rotors to cars normally equipped with standard(260mm) rotors. Increasing rotor "swept area" in thisway will greatly improve stopping power (leverage) andhelp to reduce high brake temperatures that can causepremature brake fade and poor pedal feel.

Kits include: 278 x 24mm EBC sport (groove &dimple) or standard front rotors, Mintex 1144 highperformance or MIntex A/F street front brake padset, custom caliper mounting brackets (utilizesstandard caliper) & assorted hardware (fitment withmost 15" wheels -some require slight modification)

BAT Big Brake Kit "A" K416A $499.50supplied with EBC groove/dimple rotors & Mintex 1144 competition padsBAT Big Brake Kit "B" K416B $419.00supplied with EBC standard rotors & Mintex 1144 competition padsBAT Big Brake Kit "C" K416C $349.00supplied with EBC standard rotors Mintex A/F street pads


10

Aeroquip Brake HosesThese performance brake hoses incorporate a stainless braidexterior over a teflon interior to keep line expansion "flexing"to a minimum. This greatly reduces the "spongy" pedal feelcommon with standard rubber brake hoses. Our stainlesslines are assembled from genuine Aeroquip AN-3 hose withpremium metric "reusable" (not the lesser quality "swagged"type) hose ends installed. Front hoses fit all Contour models,rears fit all with rear disk brakes (see model years) we alsoinclude the special strut mount bushings.Front Brake Hoses (pair) All Cars K419 49.50Rear Brake Hoses (pair) 97-2001 K419R 49.50Rear Brake Hoses (pair) 1995-96 K419RA 49.50R. Brake Hoses (pair) 95-96 w/drum K419RD 49.50R. Brake Hoses (pair) 97> w/drum K419RDA 49.50

&EBC

BRAKES

kits includepremium brakerotors by

Focus SVT Brake ComponentsWith the release of the Focus SVT comes a plethora ofperformance parts just waiting to be swapped into other Fordmodels. We have plans to incorporate Focus SVT 300mmfront rotors into a number of new brake kits we have indevelopment. As for now we can offer some of thecomponents to the DIY-ers out there who have been buggingus to release the parts. Our future offerings will includebrackets to fit standard Contour type calipers and kits withlightweight aluminum calipers.

Rotor Focus SVT 300mm (each) H426 $49.50Pad Set Focus SVT Mintex A/F H417AF $59.00



11

Suspension TECH

The European based Contour platform offers fairly competent handling right out of the box. Thismakes it a excellent candidate for suspension modifications to make an already good car handleeven better.

Struts- we are currently importing sport tuned struts for the Contour/Cougar cars by the followingEuropean manufacturers; Sachs/Boge, Spax, Bilstein and Koni. Most are European market productsdesigned for the Mondeo, which we have tested for compatibility (fit and performance) on the UScars. See fitting notes below. Note: Cougar's use later 98-2001 Contour Struts.

Front Struts- are different on 95-97 (early) and 98-2001 (late) Contour/Mystique cars. Early strutassemblies utilize a "pigtail" type spring, as located on lower perch. Later 98-99 strut assembliesuse an open wound spring (diameters same at top and bottom). For anyone considering swappingsprings between the model years, it is possible to use later 98-01 type springs with earlier 95-97struts (the strut perch will allow the spring to seat well enough for proper function). Fitting early 95-97 springs to late 98-01 struts is not recommended as the strut perch has no provision for the spring"pigtail" end to seat. Swapping complete strut/spring assemblies between the model years is possible,and has some benefits depending on application and brand of components being used.

Rear Struts- Although some manufacturers part numbers differ between early 95-97 and later 98-99 cars, we don't see any real difference in the overall specification of the component. This meansswapping rear struts between early and late cars should not pose a problem.

Springs- It seems common these days that aftermarket springs are being purchased more for "looks"than any road handling enhancement value. Lowering or "drop springs" are just that, they lower thecars ride height for mostly aesthetic reasons. With spring rates very similar to stock (usually no morethan +10%), these springs are marketed for use on newer cars with O.E. (stock) shocks so the car willlook cool. The handling benefit to this type of spring is minimal. The lower center of gravity is a plus, butthe amount of body lean is still greater than optimum. BAT has developed a true sport spring applicationfor the Contour which combines both lowered ride height with increased rate for optimal performance.Our spring applications are not suitable for use with standard O.E. shocks. For best results they shouldbe used with sport valved (increased rate) European type struts only.

Bushings- We have been involved in manufacturing our own line of urethane suspension bushingproducts for over 15 years. We got involved purely by necessity as the recognize bushingmanufacturers had little interest in making small batches of bushings for the "non popular" Fords wewere interested in. So we invested in having moulds made and BAT currently offers a wide range ofurethane products for cars like Fiesta, Escort, Capri, Cortina, Merkur XR4Ti & Scorpio and now theContour. Our bushing products offer unequaled quality as we use only the finest materials. Shore-Ahardness Uniroyal 78-80 is our choice for precise control without harshness or noise. We have carsthat have been assembled with our bushing products and used (raced) for more than 15 yearswithout showing signs of wear or degradation.

Sway Bars- We recommend increasing the diameter of the rear bar only for better "balance". For thiswe offer a 19mm bar upgrade for standard cars (normally equipped with 16mm), and a 21mm for SE/SVTcars (normally equipped with 18mm). We do not recommend increasing the front bar diameter on frontwheel drive cars such as the Contour. Installing a larger front bar would increase understeer which wouldnot be desirable. The 19mm bars are European Ford imports, 21mm bars are a BAT produced item.

Urethane Sway Bar Clamp BushingsOne of the first suspension modifications you should make is also thecheapest and the easiest. Our heavy duty urethane bar clamp bushingsreplace the soft standard rubber bushes for quicker, more direct,

response to steering input. Theory being, some of the sway barseffectiveness is wasted as bushing deflection. If this can be limited

more of the leverage is transferred making the bar more effective.

Front Bar Bushing 19mm (SVT only) K407BA $9.50eaFront Bar Bushing 20mm (standard) K407BU $9.50eaRear Bar Bushing 16mm (standard) G408BU $6.50eaRear Bar Bushing 18/19mm (SE, SV T, Cougar ) K408B $6.50eaRear Bar Bushing 21mm (BAT Bar only) K408BU $6.50ea



ST24 Front SpringsThese factory Ford European ST24 front springs are handy forfitting late type (98 >) struts to early (95-97) cars (struts do notnormally interchange- read suspension tech section). Springrate is on the sporty side (similar to SE/SVT springs) rideheight is standard.

Front Spring ST24 (each) K414 $95.00

Sport Spring Sets

Our specially designed progressive rate -25mm (-1") sportsprings will minimize body "roll" while cornering and reduce"dive" under hard braking. Low and stiff enough for maximumhandling benefit without sacrificing the overall comfort andload carrying capability of the vehicle. Progressive springsare designed to become stiffer (10-50%) as they arecompressed allowing for a smooth transition between (veryreasonable) straight line comfort and high performancecornering. We can supply sport springs for both early (95-97) and late (98 >) 4 and 6 cylinder Contours. BAT sportsprings are made from premium chrome silicone spring wire,cold wound to exacting standards, meeting all ISO/TUV standards.

Notes: Sport springs require fitting struts with more rebound rate thanstandard O.E. types offer. We offer a selection of European manufactured strutsthat are suitable of the task. Lowering your cars ride height also adds negativecamber to the front suspension angles. This is usually not a problem and actually benefitshandling as long as the car is not lowered more than 1"- 1.5" (25mm-35mm). The Contour does not havean adjustment to compensate for large changes in camber and excessive tire wear can occur with additionallowering. Always have the front and rear realigned (set toe) after doing any suspension work.

Sport Spring Set 95-97 (6 cylinder) K414A $209.00 setSport Spring Set 98 > (all 6 cyl & SVT ) K414M6 $209.00 setSport Spring Set 98 > (4 cylinder) K414M4 $209.00 setSport Spring Set 98-2000 (Cougar) K414C $209.00 set NEW



European Handling KitA "tuned suspension system" offers a matched componentsengineered to work together for optimal performance. This iswhat you can expect the BAT European Handling Kit whicheasily takes a standard Contour (with performance wheels &tires) to well beyond SVT handling performance levels (readsome customer comments below) and is also a greatenhancement for SVT's as well. Our complete suspensionpackage includes a set of German made sport valved gasstruts and matching BAT -25mm sport springs (see springsection). The ride feel is very European, noticeably firm butstill compliant. No loose dental fillings here. Ride height isreduced (-25mm), enough to maximize handling and atheisticswithout totally sacrificing the load carrying capabilities of asedan type car. Additionally buying parts in this "kit" formrepresents a cost savings over individual part pricing.

BAT European Handling Kit (95-2001 Contour) K400A $595.00

BAT European Handling Kit (98-2000 Cougar) K400AC $595.00

Euro Sport StrutsMade in Germany, and specially valved to our specifications, these strutsoffer substantially uprated bump and rebound specification. The shockvalving is especially well suited for use with sport (stiffer) springs and willalso do wonders in place of the SVT's O.E. struts. If you are looking for ahigh quality (yet affordable) gas strut to make your Contour handle up to itsfull potential these are the ones to have. We are so impressed with theperformance of these struts we have made them the basis of our BATEuropean Handling Kit (see above). Front struts utilize late type (98-2000)spring pearch design but can be fitted to earlier (95-97) cars by using latetype front springs. Rear struts interchange without modidfication.

BAT Euro Sport Front Strut* (98 >) K401G $99.00 ea.BAT Euro Sport Rear Strut* (all years) K402G $99.00 ea.*struts also fit Cougar all years

Read customer comments on the BAT European Handling Kit :

"The kit totally transformed my cars handling. I can't believe it is the same car." - Dave G. Cherry Hill, NJ (97Contour LX)

"Much less body roll and greatly reduced dive under braking over the stock SVT suspension, it now just feels right" -Ted W. Phila., PA (1999 SVT)

"The best modification I have made to my car" - Rick G. Sherman Oaks, CA (1995 Contour SE)

"Makes you realize how much better Ford could have made the SVT handle without any ill effects. The car nowhas much better overall balance." - Dave F. West Chester PA (1998 SVT)

"I can't believe the amount of performance for the price. Kudos to BAT." - Robin P. Tarpon Springs FL (1998 Contour)

1234567890112345678901123456789011234567890112345678901

Suspension TECH

Specified Range

-1.7 to .08 1.3 to 3.3

-0.17 to 0.00

Specified Range

-1.4 to 0.6 0.04 to 0.24

Alignment Specifications (front)

0

00

0

0 0

0 0

0 0

Alignment Specifications (rear)

cambercaster

toe

cambertoe

Before

0.051.8

-0.05

Before

-0.03 0.15

0

0

0

0

0

0

After

-1.201.8

(-0.37 )

After

-0.09 (0.31 )

0

0

0

0

0

0

0

0

0

Adjusted

-1.251.8

-0.09

Adjusted

-0.10 0.16

Sachs Super Gas StrutsPremium quality Sachs Super Gas struts include such features aslarge diameter induction hardened full chromium plated piston/rod,for improved heat dissipation and reduced friction. Dual lip sealsfor leak-proof performance. Variable automatic multi-stage valvingfor superior ride dynamics for all driving styles. Great features anda limited lifetime warranty team up to make the Sachs Super Gasstruts an excellent strut for the money. Fronts fit 4 & 6 cylinder earlycars (1995-97) or late (1998-2001). Rears suit all models (1995-2000).

Front Sachs Super Gas Strut (95-97) K401S $79.00 each

Front Sachs Super Gas Strut (98-2001) K401SA $79.00 eachRear Sachs Super Gas Strut (95-2000) K402S $79.00 each


14 Ford Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........by

Many owners are concerned about the possible alignmentissues that go along with lowering a vehicles ride height. Wewarn against using springs that lower so much that thealignment will be out of specification even after adjustmentcausing adverse tire wear. To elaborate on this issue we testeda 1997 Contour with a BAT European Handling Kit. The"before" spec. is prior to modification, "after" is with the kitinstalled, and "adjusted" is after alignment is optimized,"specified range" is what would be considered an acceptablespecification range. As ride height is lowered camber changesfrom (-0.02 to -1.20 ) and toe changes from (-0.05 to -0.37 ).Even with the ride height reduced 1.15" the test car is stillwithin camber tolerance at (-1.20 ). Camber is non adjustableand it is important to stay within the maximum of (-1.7 ). Thetoe spec (-0.37 ) is well out of range but is easily adjusted to(-0.09 ) toe out. Camber also changes slightly with the toeadjustment to (-1.25 ). In the rear the toe is again affected bythe lowering to an out of specification (0.31 ) which is adjustedback to an average of the standard range at(.016 ). As the data confirms using the properly matchedsuspension components yields both maximum handlingbenefit without any adverse alignment issues.

00

0

0

00

0

0

0

0

0

Rear Sway Bars Contour/CougarFor increased handling and better balance(reduced understeer) we highly recommendincreasing the diameter of the rear sway bar. Forthis we offer the 19mm European Mondeo rear bar as anupgrade for the standard 4 & 6 cylinder cars (normally equipped with16mm) and for the SE/SVT cars (normally equipped with 18mm) weproduce a custom 21mm rear bar. For maximum performance and ease ofinstallation, we supply the sway bars with urethane bushings. BAT sway barsare the only aftermarket sway bars that exactly follow the original bar bend specifications and are equippedwith bushing limiters to keep the bar properly located (this is the main cause of noise and why some aftermarket swaybars often destroy the mounting clamps). weight specification 19mm bar @ 5.5 lbs., 21mm bar @ 7.4 lbs.)

Rear Sway Bar 19mm w/bushings K408 $89.00Rear Sway Bar 21mm w/bushings K408A $109.00



Bilstein Strut Front 1995-97 K401B $122.50Bilstein Strut Front 1998 > K401BA $122.50Bilstein Strut Rear (all years) K402B $122.50

Make it a Sport Kit Package 4 Bilstein struts (front & rear) with a set of BAT sport springs for theultimate handling performance and get a discount price over buying the parts individually.

Sport Kit (F & R Bilstein struts w/BAT -25mm sport springs) K400B $659.00

Bilstein StrutsAnyone familiar with the name Bilstein would most likely associatethem with the high dollar "Rallye" series (yellow color) invertedpiston mono tube dampers they have been offering for years.By designing a series of more traditional twin tube gas strutsBilstein is attempting to bring high quality German manufacturedstruts and shocks to the masses, that is if you are fortunateenough to drive a vehicle that is worthy of their attention. We havebeen pestering our Bilstein representative in Europe for over a yearnow and finally have some of their new, and more attractively priced,product available for sale. New "T/C Series" struts offer genuine Bilsteintechnology, and quality, with features like twin tube high pressure gaspressure design- for precise handling and control, hard chrome pistonrod, multi stage valving with self adjusting piston, and performance thatexceeds all original equipment specifications. After testing these new Bilstein's ona couple of different Contours we are pretty impressed. First we installed a set on a1996 SE thinking the combination of the SE's fairly stiff stock springs and the high pressure valvingwould be a nice complement. You will note that there are very few applications on front struts for theseearly cars and these Bislteins paired with the SE springs worked tremendously well together. We thendid a similar install on a SVT, and like the SE had very good results with the stock springs. The car wasnoticeably more firm and well controlled. For the last test we matched the Bilsteins with our BAT -25mm sport springs to get a feel for their maximum potential and they did not disappoint. Again the carfelt very well balanced, but with even less body roll and dive (more a benefit of the springs). There youhave it, whether you are looking for top quality performance struts to upgrade a standard car, or somethingto match up with aftermarket sport springs these Bilsteins are an excellent choice.

European ST200 Strut SetsFor anyone looking for performance on a budget we have acquired a quantity of Motorcraft European

specification Mondeo ST200 struts. These have fairly sporty valving,similar to what was used on the SVT cars in this country. Struts are

high quality German units made by Sachs to Ford specification.If your SVT is feeling a bit mushy with age or you want to upgradea standard 4 or 6 cylinder Contour or Cougar these would be a

great choice. The best part is the price...how's $224.50 for aset of 4 !!! That's almost like buying 2 shocks and gettingthe other 2 for free. What a deal. Notes: all struts sold assets of 4 only, struts are designed to fit 1998-2001 Contour

or Cougar cars (but could be fitted to earlier cars by fitting latemodel front springs or spring sets designed for later 1998 > cars.)

Motorcraft ST200 Strut Set (4) K400M $

15

SOLD OUT



16

StrutsBAT is one of a select few distributors of Spax manufactured performancesuspension components. At this time Spax "V" (non adjustable) sportstruts for the early 95-97 cars and late 98 > cars are avaialble. TheSpax "V" series gas strut/shocks offer a combination ofperformance valving (nonadjustable), shortened rod length (allowsfor use with lower springs) and a very affordable price. Over theyears we have put hundreds of sets of "V" struts in service forother Ford vehicles and have found them to be extremely reliable.The adjustable Spax "TA" type gas struts offer performance valving(24 way top adjustable), shortened rod length (allows for use with lowersprings) and should be available spring/summer 2002.

Spax Sport Front Strut (Contour 1995-97) K401V $87.50eaSpax Sport Front Strut (Contour/Cougar 1998 >) K401VA $97.50eaSpax Sport Rear Strut (Contour/Cougar all years) K402V $87.50ea

Spax Adjustable Front Strut (Contour 1995-97) K401A TBASpax AdjystableFront Strut (Contour/Cougar 1998 >) K401AA TBASpax Adjustable Rear Strut (Contour/Cougar all years) K402A TBA

Make it a Sport Kit Package 4 Spax struts (front & rear) with a set of BAT sport springs for theultimate handling performance and get a discount price over buying the parts individually.

Sport Kit Contour (F&R Spax "V" Struts w/BAT Sport Springs) K400S $569.00Sport Kit Cougar 98-2000 (F&R Spax "V" Struts w/BAT Sport Springs) K400SC $569.00

Sport Kit Contour (F&R Spax Adjustable Struts w/BAT Sport Springs) TBASport Kit Cougar 98-2000 (F&R Spax Adjustable Struts w/BAT Sport Springs) TBA

Koni StrutsPreimum quality Koni twin tube low pressure gas struts with the externaltop "knob" for adjustment for Contour and Cougar. We supply theyellow "Sport" versions which have up to 50% more reboundcompensation over the standard red "special -D" units making themwell suited for use with stiffer sport type springs on cars being usedfor light competition applications (auto-x, track events).

Koni Front Sport Strut 95-97 K401K $168.50 ea.Koni Front Sport Strut 98 > K401KA $168.50 ea.Koni Rear Sport Strut (all years) K402K $168.50 ea.

Make it a Sport Kit Package 4 Koni struts (front & rear) with a set of BAT sport springs for theultimate handling performance and get a discount price over buying the parts individually.

Sport Kit (F & R Koni struts w/BAT sport springs) K400K $849.00 kit



17

Front Strut Brace Contour/CougarThis nicely designed OMP front strut towerbrace is just the thing for stiffening up the frontchassis on your Contour or Cougar. Brace endplates bolt directly to the strut towers linkingleft and right sides and allow for loadingadjustment with R/L thread turn buckle andlock nuts. This type of bar actually works quitewell (unlike the ones that attach to the struttop nuts and damage the struts) and can befitted in minutes. Installation only requiresdrilling a few holes and using supplied self-tap fasteners. Bar is supplied in a durableepoxy paint f inish with hardware. Oneinstallation tweak is if you have the front struts off the car (so that the underside of the tower isaccessible) use nuts, bolts and washers for a slightly more secure mounting, but the standardscrew mounting will work for most installations. Supplied color is either yellow or red based onmanufacturers supply.

Front Strut Brace Contour/Cougar K403F $124.50

Rear Strut Brace Cougar ST200Ford did make a small number of ST200 Cougars for the European market, but no one knows for sureif these beautiful rear strut tower braces ever made it on the production cars. These are a factory partwith Ford numbers and markings, but strangely none of the components are referenced on any microfiche(either here or abroad) and car owners say their ST Cougars did not come with one installed. Maybe

these bars were supposed to bea dealer installed accessory thatwas never approved, whoknows? What we do know isall the components are

extremely well made, ifnot over engineered.Bar installs across therear strut tower and

cross braces down tosecure floor mounting that

attach to the floor and lowerstrut towers. All fastening points include stiffening plates. These bars would cost hundreds of dollars toreproduce if you could even entertain doing the stamping for the mounts and plates. If you are seriousshoring up your Cougar's rear suspension and want the absolute best rear strut available this is it. Note:bars are now supplied with hardware.

Rear Strut Brace Cougar ST200 K403RC $279.00



18

Adjustable Front Camber/Caster KitThere is only limited adjustment for alignment (toe only) on the Contour cars. Incorrect alignmentspecifications cause accelerated tire wear and less than desirable handling characteristics. Vehicle

lowering beyond recommended ride height, setting up a carfor competition use, adjusting for left/right variation, andcorrecting collision damage are all valid reasons forneeding adjustable camber/caster; which as stock theContour does not offer. We offer these handy kits which

use a offset eccentric top mount and plate design forprecise camber and caster adjustment. Once installed,adjustment is made by removing the top plate lock and simplyinserting a 3/8" rachet and extension into the top plate andturning (with the weight off the suspension). Caster andcamber relation will be determined by the location of the strut

shaft and is infinitely adjustable within a range, depending onposition it is possible to change camber (only), caster (only) or a

combination of camber and caster. Kits are sold each, one is kit required per side. It is possible touse only one side especially when correcting for tolerance issues.

Adjustable Front Camber/Caster Kit (each) K423F $74.50

Upper Strut MountsThe perfect time to replace the upper strut mount insulatorsis when you are changing the struts. Cars with over 60,000miles can definitely benefit with a fresh set. We offer qualityEuropean made replacements that will do the trick and at adiscount price you can afford.

Upper Strut Mount Front (each) K404F $29.50Upper Strut Mount Rear (each) K404R $32.50

Rear Strut BraceSimple and effective tubular steel brace helps tie right and left rear shocktowers together for enhanced rigidity. Bars are made from 1" seamlesstubing with 1/2" opposite handed rod ends to allow for easyinstallation and preload adjustments. When makingsuspension modifications one should consider a braceto reduce the chance of chassis flex due toincreased cornering loads. Supplied in adurable gloss black powder coated finish.Fits al l Contour & Cougar models.Hardware included.

Rear Strut Tower Brace K403R $129.00

pB

pA

pC

pE

19

pA Inner Tie Rod End -ball and socket joints can be prone to wear with time, same left or right. Rodsdiffer slightly depending on what wheel size came on the car originally.

Inner Tie Rod End (L & R same) 14" wheel K434T $24.75Inner Tie Rod End (L & R same) 15 & 16" wheel K434TK $24.75

pB Outer Tie Rod End -handed left (driver) and right (passenger), nyloc nuts included. The parts lookvery similar, but there is a year break on this item.

Outer Tie Rod End (LH) 1995-96 K434L $18.50Outer Tie Rod End (RH) 1995-96 K434R $18.50Outer Tie Rod End (LH) 1997-2001 K434LA $18.50Outer Tie Rod End (RH) 1997-2001 K434RA $18.50

pC Front Sway Bar Link -these really take a beating and can attribute to front sway bar noise. Same leftand right 2 per car. Ours are an upgrade over standard Ford units.

Front Sway Bar Link K407L $17.50

pD Ball Joint -tend to show wear with time and mileage or the boots rip letting the grease leak out and let dirtin. Ball joints are riveted on the end of the control arm but can be removed by drilling rivets or using a air chisel.New ball joints are supplied with hardware (nuts, bolts & washers) to reattach.

Ball Joint (L & R same) K428 $19.50

pE Control Arm Assembly -handed left (drivers) right (passenger) these are complete assembled control arms withfront & rear bushings and ball joint. We have seen cars with mileage as little as 50,000 with significant bushing and ball jointwear. The Contour and Cougar use one of two types of lower arm with either horizontal or vertical bushings. Early cars (priorto 1998) use the horizontal type bush, but later cars are a mix of either or depending on the type of lower crossmemberinstalled at the time of manufacturer. Best check before ordering. The horizontal bush arms mount with 4 fasteners (2 ateach end of the bush) and the vertical bush arms use 2 long bolts (1 per bush) through the middle of the bushing.

Control Arm Horizontal Bush (LH) K428L $169.50Control Arm Horizontal Bush (RH) K428R $169.50Control Arm Vertical Bush (LH) K428LA $55.00Control Arm Vertical Bush (RH) K428R A $55.00

Suspension ComponentsSome early Contours have racked up high mileage and are in need of replacement suspension parts. Othersmight require new components due to collision damage. Larger wheels/tires and more aggressive driving canalso take its toll on parts. Suspension products for Euro Fords are our specialty. We purchase them in largequantities so that we can offer you the absolute best prices. All suspension parts European manufactured andmeet all TUV and ISO standards so you can be assured you are receiving the highest quality.

pD





Euro-Edition Wheel 17"Offered on some 2003 SVT's and known as the "EuroEdition" wheel. Similar to European ST170 wheel, butin a dark grey (argent) color rather than silver, andwithout large center cap that covers the lug bolts. Specs:17" diameter, 7" width, offset (et49), weight 21 lbs, centercap included. Alternate colors: black, white & gold.

SVT Euro Wheel- ar gent H411E $125.00eaSVT Euro Wheel- black H411EB $150.00eaSVT Euro Wheel- white H411EW $155.00eaSVT Euro Wheel- gold H411EG $150.00ea

Focus SVT 5-Spoke 17"Focus SVT 5 spoke 17 x 7" alloy wheels offer originalFord quality at a price that can't be beat. Supplied inbight silver metallic flake finish. Specs: 17" diameter,7" width, offset (et49), weight 21 lbs, center capincluded. Alternate colors: black, white & chrome.

SVT 5-Spoke- silver H411S $125.00 eaSVT 5-Spoke- black H411SB $150.00 eaSVT 5-Spoke- white H411SW $150.00 eaSVT 5-Spoke- chrome H411SC $250.00 ea

5-spoke Cosworth WheelOriginal equipment on Cosworth Escort- optional on Mondeoin Europe (similar to 1998 SVT wheel) silver color- clear coatfinish for added protection, center cap w/ Ford oval.

5-spoke Cosworth Wheel (available sizes)(15" x 6") $195.00 each(16" x 6.5", 16" x 7") $209.00 each

7-Spoke "Soft Effect" Wheel Flush spoke, silver color-clear coat finish for added protection or optional chromefinish, locking center cap w/ Ford oval.

7-spoke "Soft Effect" Wheel (silver) available sizes(15" x 6", 15" x 7", 17" x 7.5") $209.00 each7-spoke "Soft Effect" Wheel (chrome) available sizes(15" x 6", 15" x 7", 17" x 7.5") $309.00 each

The Contour is a unique application for road wheels.They are designed for use with (hub-centric) wheels ina 38-50mm offset- not the most common application inthe states. We import factory Ford European Ford "RallySport" brand wheels, or supply proven aftermarketbrands that we know fit the car properly.

6-Spoke R/S Wheel Advanced styling with flat flush spokes,silver color- clear coat finish for added protection, lockingcenter cap w/ R/S logo.

6-spoke R/S Wheel ( available sizes )(15" x 7" , 16" x 7") $209.00 each



4 Spoke "Turbo" WheelStylish 4 spoke "Turbo" wheel availablein 16" diameter with either a 6" or 6.5"width. Finish is bright silver. We highlyrecommend these factory Ford wheelsfor guaranteed quality fit and finish.Center cap included.

4 Spoke "Turbo" Wheel16 x 6" $195.0016 x 6.5" $195.00

2 x 4 Spoke WheelStylish 2 x 4 spoke wheel availablein 16 & 17" diameters from 6.5" to7.5" widths. Finish is bright silver. Wehighly recommend these factoryFord wheels for guaranteed qualityfit and finish. Center cap included.

Available Sizes:15 x 7" $209.0016 x 6.5" $209.0017 x 7.5" $209.00

2004 SVT Wheel 17"Latest style 2004 Focus SVT 6-spoke alloy wheels offer originalFord quality at a price that can't bebeat. Supplied in bight silvermetallic flake finish with black SVTlogo center cap. Specs: 17"diameter, 7" width, offset (et49),weight 20.5 lbs, center cap included.

2004 SVT 17 x 7" Wheel H411S4 $135.00 ea

ST170 Wheel 17"Focus ST170 17x7" (et49) 15spoke alloy wheels.Finish ismetalic silver with a brushedstainless look center cap & blueFord oval. Again it is hard tobeat factory Ford wheels forlooks fit and quality finish.Weight 20.5 lbs.

ST170 Wheel 17 x 7" w/cap $224.00 each

ST200 Wheel 17"Factory equipment on the MondeoST200 these stylish 14 spoke wheelavailable in 17" diameter with a 7"width (et49). Finish is bright silver.We highly recommend these factoryFord wheels for guaranteed qualityfit and finish. Center cap (brightfinish) included.

ST200 Wheel 17 x 7" $209.00 each

Focus R/S Wheel 18"Factory Focus R/S Turbo wheel.Supplied in bight silver metallicfinish with white R/S logo centercap. Due to increased wheel offset,and width, wheel arch modification,and or, flairs might be required.Specs: 18" diameter, 8" width,offset (et42), center cap included.

Focus R/S 18 x 8" Wheel H411RS $210.00 ea


22 Ford Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........by 1234567890112345678901123456789011234567890112345678901

BAT Standard Cone Filter Kit

Air Filter TECH

The standard air box and filter, with it's various baffles and mufflers,is more designed for quiet operation than efficient airflow. Replacingthe standard air filter with some type performance filter offers themaximum "bang for the buck" and should be considered as the firstperformance upgrade for your vehicle. For this we offer a wide selectionof options. First is a simple drop-in free flow panel filter that replacesthe standard filter in the stock air box and is best for owners whorequire a completely stock appearance for emissions inspections orwarranty issues. These performance panel filters use a free flowcotton/gauze type element offering increased filter area which arecleanable and should last the life of the vehicle. You can increase theairflow to the airbox, when using this type of filter, by removing thebaffle/muffler from the inside the fender.

BAT Reverse Cone Filter Kit

inefficient inlet plumbing to the manifold. Fortunately the Contouris far from the worst case scenario. It benefits from a short directinlet tract to the manifold, the filter location is away form the majorheat emitting components and the under hood airflow is more thanreasonable. Under normal conditions (driving 20 mph or greater)the under hood air being supplied to the engine is likely to bewithin 5 degrees of ambient. On the Contour these cone or foamfilters do offer a tangible increase in performance which can befurther enhanced by removing the fibrous sound insulation fromunder the hood. This will help air circulation and help reduce underhood temperatures. We are working on a kit with pre-cut selfadhesive heat resistant panels that stick under the hood offeringbetter sound insulation and heat management (available Fall 2001).

There are a number of filter kit options that replace the stock air filter and box by attaching a filter directly to theairmeter. These filter kits use either cone shaped cotton/gauze or formed multidimensional foam element.Both types less restrictive (free flow) with more filter area over the panel type filter, and can be cleaned for longlife. There have been recent articles claiming these air filters perform poorly certain types of cars. This can betrue as some engine compartments have very high under hood temperatures, combined with poor air flow and

How can you make the cone filter concept better? Adding cooler more dense air to the engine will increaseperformance. This is why you will see all kinds of adaptations with insulated pipes, filters in boxes, filtersmounted in fenders and other sorts. On the V6 Contour insulating the inlet tract is not worthwhile as it is veryshort. Remote mounting the filter just makes it get dirty real fast(requiring constant cleaning) and dirty filters have reduced airflow.Our approach was to leave the filter under the hood where it isbetter protected from water and excessive dirt and simply pumpremote air from the lower grille via a flexible hose directly to thefilter. This required a custom filter designed with an internal air flow"shape" in the reverse cone end of the filter. Working like a diffuseron the inlet of a jet engine, this "shape" helps keep the air flowmore laminar effectively smoothing and speeding the air enteringthe inlet tract through the filter. With our remote air filter kit now it ispossible maximize cone filter concept without any drawbacks.

Take your pick we have a filter kit to suit any requirement. Checkthe next few pages for more air filter and related components.

DCAF Reverse Cone Filter Kitw/remote air option


Ford Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........byFord Contour Performance Parts.........by Air Filter KitsWe are pleased to announce our new line of high performance cone air filter kits and components for the V6Contour cars. This range of filters has options from fairly basic types (highly functional & inexpensive) to higherend filters which incorporate new design features like internal air flow enhancing shapes and remote airconnections. These filters yield very tangible effects for a minimum cost and can be made even more effectivewhen combined with exhaust upgrades or other efficiency type modifications.

MAF AdaptorFor anyone interested inengineering their own air filterinstallation we are happy to supplyour high quality machinedaluminum air filter adaptor.Attaches directly to the air meterand fits any brand 85mm I.D. filter.

Filter Adaptor K22M $39.00

MAF GasketIf you have purchased some otherbrand of air filter kit and want to usethe stock "diffuser" screen we cansupply the proper gasket. Thediffuser (F4ZZ-9E931-A) is usedbetween the filter and air meter onSVT's and can be fitted to all V6 cars.

Gasket MAF K22G $5.00

IAT Relocation KitRequired for use with most air filterconversions on non SVT cars thiskit relocates the IAT sensor fromthe filter box to the air inlet hose.Kit joins two of the vent lines witha tee and frees up a port so thatthe sensor can be fitted.

ACT Relocate Kit K22R $2.50

Performance Cone Air Filter KitThis is a great performance air filter kit at a price everyone can afford. The BAT Performance

Filter Kit combines all the components needed to replace the stock air box/filter on V6powered Contours and Cougars with a free flowing cone type filter. Benefits with thistype of cotton gauze filter are reduced air restriction, increased filter area and repeat

clean-ability (filter should last a lifetime). As stated elsewhere in our "filter tech" section,these filters offers plenty of bang for the buck and should be considered

as a first modification. Kit includes: cone filter w/mounting clamp, air meterfilter adaptor, gasket & mounting hardware. Note: cars with inlet air

temperature (IAT) sensor in the stock air box (non SVT's) require K22R- IAT Relocation Kit (see below).Performance Cone Air Filter Kit K22C1 $69.00

23

Air Filter Clean / Re-oil Kit M22C $9.65

Reverse Cone Air Filter KitSimilar to the above basic cone filter kit but with a reverse cone filter on the end offering slightlymore filter area and air flow capacity. Kit combines all the components needed to replace thestock air box/filter on V6 powered Contours and Cougars with a free flowing cone type filter.Benefits with this type of cotton gauze filter are reduced air restriction, increased filter area andrepeat clean-ability (filter should last a lifetime). Kit includes: cone filterw/mounting clamp, air meter filter adaptor, gasket & mounting hardware.Note: cars with inlet air temperature (IAT) sensor in the stock air box(non SVT's) require K22R - IAT Relocation Kit (see below).

Reverse Cone Air Filter Kit K22C2 $89.00Air Filter Clean / Re-oil Kit M22C $9.65



Air Filter Kit w/Remote Air

The DCAF Performance Air Filter Kit takes the conefilter to the next level of performance (more in thefilter tech on page 18). This well designed kit usesa premium high flow cotton gauze reverse cone filterincorporating a remote air hose attachment. Arugged 1 meter (3.3 foot) 70mm (I.D.) flexible hoseconnects to the filter and is routed through thefender well opening, forward down the inside ofthe wheel well to a location in the front lower grillearea (see below left). Air is supplied directly intothe “reverse cone” end of the filter so that reducedair inlet charge temperatures can be realized. Theengines requirement for air depending on throttleapplication and vehicle speed will dictate the amountof air that is either supplied by the main filter cone or remote air supplied from the reverse cone endof the filter. Once the car is under way a smooth transition between air supplied from under hood toremote (cooler) air takes place. In testing we found that sometimes supplying remote air to the filtercan cause problems. A boundary effect can occur when warm and cold air collide within the filter and

positive air pressure can build up when the throttle is closed. This canstall the air flow causing a stumble in performanceas the engine corrects. The DCAF filter kitaddresses these problems by adding anairflow "shape" in the reverse cone end ofthe filter (see photo at right). Working like adiffuser on the inlet of a jet engine, this"shape" helps keep the air flow morelaminar. This effectively both smooths andspeeds the air entering the inlet tract throughthe filter. We are confident you will be impressedwith both the quality of the kit components andperformance of the kit as a whole. The remote air hose is very flexibleand is easy to route with enough length to reach the lower center grillearea, fog lamp hole (if not equipped with lamp) or just about anywhere

in the front of the vehicle. We also supply a special gasketfor between the MAF adaptor and air meter so that the airdiffuser screen can be retained on the SVT. On the roadengine performance is noticeably enhanced with quickerthrottle response, better pick up (acceleration), and a niceaggressive induction sound.

Filter kit includes: reverse cone filter with DCAF technology,MAF air filter adaptor & gasket, mounting bracket, flexibleremote air hose w/connector and clamps.

Air Filter Kit w/Remote Air K22C3 $165.00Air Filter Clean / Re-oil Kits M22C $9.65



25

K&N Panel T ype Air FiltersA quick and easy performance modification is to replace the standardpanel type air filter with a direct fit K&N high performance air filter.Premium oiled cotton gauze filter material offers low restriction and willnot clog as quickly as standard paper elements. K&N elements areunaffected by moisture and can be cleaned and re-oiled over and over,making it the filter the last filter you will need to buy. Filter for SVT is newfor 2002 and has the factory type "nose cone" end.

K&N Air Filter (4 Cylinder) K22P1 $43.50K&N Air Filter (V6 -not SVT) K22P2 $43.50K&N Air Filter (V6 Cougar) K22P3 $42.00K&N Air Filter (SVT) w/cone shape end K22P5 $58.25Air Filter Clean / Re-oil Kit M22C $9.65

Air Inlet PipeWe now offer a large diameter air inlet pipe that replaces the rubber bellows between the air meter andthrottle body on the V6 Duratec engines. Not only does our Air Inlet Pipe look nicer (Jet-hot coated silver)

but it does have better airflow characteristics than the stock rubber part. Airpipes are designed to fit the SVT with either standard air filter oraftermarket cone type filters. These may also be fitted to non SVT carswith V6, however, one of the ports is not used (requires a plug) and theywill not fit with the stock air box (only aftermarket filters). When using our

ITG air filters (see above) a slightly shorter 100mm element isrequired for proper fit. Silicone hose and clamps are includedwith Air Inlet Pipes. Note: pipes are redesigned (as of 9/01)with a larger port for the ACT sensor which puts the sensor inthe air stream and simplifies installation. The other itempictured is our stainless flex-tube air supply hose that connects

from the air pipe to the IAC valve which makes the wholeinstallation a bit cleaner by elimination the bundle of original

hoses and the baffle/muffler found on some cars. Note: not all cars can have the standard IAC air hose andbaffle/muffler removed without a unwanted "moaning" sound coming from the inlet tract.

Air Inlet Pipe (SVT) K22A $75.00Air Supply Tube/Hose K22E $9.00

Ignition W ire SetsWe recommend Magnecor brand ignition wire sets for superior quality,performance, and durability. Forget all the advertising hype from theever growing list of ignition wire merchants about their wire sets makingadditional power, voltage, whatever. When it gets down to qualityMagnecor sets the standard. We have put hundreds of these wire setsinto service on various Ford engines and have yet to have any problemswith premature wear. Cables are supplied in 8.5mm diameter, red incolor, standard length, with factory boots for guaranteed exact fit.

Ignition Wire Set (2.0L 4 Cylinder) K9HT $85.00Ignition Wire Set (2.5L 6 Cylinder) K9HT6 $124.50


BAT Inc. 7630 Matoaka Rd. Sarasota, FL 34243 (941) 355-0005 fax (941) 355-4683

Dual Mass Crank DamperUsed on the latest Mondeo 2.5L V6 Duratec engines these "Dual ModeDampers" reduce vibrations at a more than one frequency. The part looksmuch like the standard crank damper with a second mass ring pressed onthe front, hence dual mode (two dampers). When installed the final resultis really quite amazing. The engine feels smoother and more refined,especially above 4000 RPM where the secondary mass comes into play.We would recommend this part to anyone who uses the upper part of therev range on a regular basis and wants to help extend their engineslongevity. As far as piece of mind goes, if Ford decides re-engineer a partit might be to address a possible problem which in this case makesupgrading even more worthwhile. Replace the belt when installing thedamper- our price on replacement drive belts can't be beat at only $14.00.

Dual Mass Crank Damper (V6 Duratec) K5DM $88.50Attatching Bolt for Damper K5B $3.95Serpentine Drive Belt K6G $15.00

Ignition Wire Sets V6As a budget alternative to the Magnacor wire sets we have been happywith the performance and quality of the Ford Racing ignition wires by MSD.They are custom length 9mm high temp wires with factory boots andconnectors and are available in selected colors, blue, red & yellow. Orderingnotes: add B for blue, R for red, Y for yellow after part number. ExampleK9HM-B is a wire set for V6 engine in blue color. Cougar V6 after 2001uses a different coil wire end which are not available on these sets.

Wire Set Ford Racing 9mm (2.5 6cyl*) K9HM-_ $47.50*not for 2002 Cougar

Ignition Wire Sets 4 CylinderAs above but for 4 cylinder applications. Please see the photo (left)to help identify your coil wire conector type. Ford has used bothtypes after the 1998 model year. Ordering note: add B for blue,R for red, Y for yellow after part number.

Wire Set Ford Racing 9mm (2.0 4cyl*) K9HZ- _ $37.50*coil wire end with retaning clipsWire Set Ford Racing 9mm (2.0 4cyl*) H9HM-_ $37.50*push-on coil wire end, NO retaning clips

Spark PlugsMotorcraft Platinum plugs are still the best performance choicefor use in the Duratec V6 engines. With a broader tip than mostwire electrode type performance plugs, Motorcraft Platinumsprovide longer service life with a reduced chance of fouling.

Spark Plug Motorcraft Platinum (22FS) K539 $8.45 each

H9HM K9HZFocus Contour/Escort

4 cylinder coil wire ends



SVT/ST200 Upper Intake ManifoldsThese are the "dual honed" versions used on the 205hp rated engines and are perfect for improvingperformance on standard (non SVT) V6 engine. Get them while you can

because quantities are limited and our price ismore than 50% off Ford retail. We can

also supply the "ST200" stick-o n logo/emblems (not

supplied with manifold)in black with brushed

stainless lettering and blueFord oval (see below). Note: when

fitting manifolds on non SVTapplications a number of other parts are

required for installation. Items like a 65mm SVTthrottle body, throttle bracket, throttle cable, TPS plug,

and assorted gaskets, can all be obtained at the local Ford dealer.

SVT/ST200 Upper Intake Manifold K515 $XXX.XX

SVT/ST200 Lower Intake ManifoldsLate production (2000-2002) SVT/ST200 lower intake manifold assemblies with 34/35mmthrottle bores and "green" fuel injectors. Use to upgrade earlier SVT's with smaller32/33mm manifold or standard V6 engines with 31/32mm lower manifolds.Match up with SVT upper manifold for maximum performance. Manifoldsare supplied completely assembled with fuel rail for either return-less (single fuel line 1999-02) or return fuel system (two fuellines 1998-99). Return type manifold is less expensive, soone could reuse their existing return fuel rail and save somemoney. Non SVT engines can substitute "beige" 17lbinjectors (see next page) or buy six (1U2Z14S411BPA)injector pigtails to plug in the later green injectors (airmeter re-calibration required). Our deal on lowermanifolds is really quite a bargain considering Fordretail is more than $800.00. Supply on both types ofmanifolds is in decline, get them while you can.

Lower Intake Manifold (RETURN-LESS) Type K515L $395.00Lower Intake Manifold (RETURN) Type K515LA $295.00

SOLD OUT

ST200 Manifold Logo/EmblemsIf you want to dress up your new manifold we can also supply the matching "ST200" stick-on logo/emblems in black with brushed stainless lettering and blue Ford oval. Size is approximately 1 x 9".

Inlet Manifold Logo/Emblem "ST200" K515S $4.95

return-less type shown



Replacement Fuel InjectorsDepending on conditions, fuel injectors start to show somediminished performance after 50,000 miles of use. It wouldbe nice to replace them with the other items that are generallyserviced at that mileage (plugs, ignition wires, fuel filter).Only real problem to that thinking is cost. From Ford at$50.00 each, replacing all 6 can become expensive. Wecan help by offering brand new injectors at a sensible price,allowing most owners replace worn injectors without rackingup a serious bill. These genuine Motorcraft 17lb (beige color)EV6 type injectors fit all 1998 and newer (non SVT) 2.5L V6engines.

Fuel Injector 2.5L V6 17lb K7G $19.00ea

28

Replacement Fuel PumpsFor various reasons V6 engine equipped cars have quitean appetite for fuel pumps. Burn one up and expect topay 175.00 to 200.00 for a replacement assembly. Wepurchased a quantity of the electric pump portion of the com-plete "fuel pump-fuel level sensor assembly". This way you canreplace the portion of the assembly that goes bad (the pump) and savesome money. Pumps are available for both "return" 1997-1999 and"return-less" fuel system 1999 and later 2.5 V6 Contour, Mystique andCougars. Pumps are genuine Ford and include new strainer/filter pick-up. We are currently checking to see if the 97-99 return type pump willfit the earlier 1995-96 cars and should have more news later.

Fuel Pump & Strainer 1997-99 (Return System) K10A $74.50

Fuel Pump & Strainer 1999 > (Return-less System ) K10B $74.50

High Performance Engine FastenersARP, the worlds leading manufacturer of high strength enginefasteners now offer some components for the 2.5L Duratec V6engines. ARP head stud kits in grade 8740 chrome molly, heat

treated to 200,000 psi tensile strength, assure proper cylinderhead sealing under even the most severe applications. For

increased bottom end reliability again use ARP 8740chrome molly 200,000 psi fasteners on the main caps toreduce the chances of crankshaft flex and cap fretting.Head and main stud sets are supplied complete withaerospace quality precision threaded nuts and parallel-

ground washers.

ARP Head Stud Set K2DS $239.00ARP Main Stud Set K2KS TBA

New

New

New



29

We are in the process of addingengine rebuilding componentsfor the Duratec 2.5L and 3.0LV6 engines to our inventory.

When it comes to gaskets, Fel-Pro is the mostrespected name in the field, pioneeringinnovations like Perma-torque head gasketsand Perma-dry high temperature mouldedseals. Find out why most engine builders insiston Felpro quality.

Full Gasket Set includes K15B (top) andK15CS (bottom) sets- all gaskets & seals forcomplete engine rebuild K15A $348.50

Top End Gasket Set includes head gasketsK15DL/DR, intake set K15FS, valve cover setK15E, valve stem seals K3G- all gaskets & sealsfor top end rebuild. K15B $279.00

Bottom End Gasket Set includes gaskets &seals to rebuild lower end (short block).

K15CS $79.25

Head Gasket (LH) K15DL $62.50Head Gasket (RH) K15DR $62.50Head Bolt Set K2D $24.00

Oil Pan Gasket perma-dry high temp mouldedrubber K15C $30.75

Valve Cover Set perma-dry high temp mouldedrubber w/grommets & spark plug tube seals

K15E $43.95

Valve Stem Seal Set (24) preimum teflon type K3G $47.25

Intake Manifold Set includes 2 lower & 2 upper K15FS $38.95

Upper Intake Gaskets (2) K15F $22.90Exhaust Manifold Set K15G $10.25Front T iming Cover Set K15J $11.50Front Crank Seal K15R $20.15Rear Crank Seal K15Q $20.50Throttle Body Base Gasket (non SVT)

K15H $2.50

EGR Gasket K15HE $2.10

Water Outlet Gasket K15N $6.25

Water Pump Gasket K15P $5.25



30

Technical Specifications (Water Pump)Operating Voltage 4V to 14.5V DCMaximum Current 7.5AFlow Rate 300-1300 gal/hr @ 13V DCOperating Temp. -5 F to 270 FPump Design Clockwise centrifugal with

volute chamberMotor Life 2000 hrs continuousPump Weight 2 LbsPump Material Nylon 66Maximum Pressure 50 psiHose Sizes 1 1/4" to 2"Dimensions (HWD) 5" x 5" x 3"

Technical Specifications (Electric Control Unit)Input Voltage 12V to 14.5V DCOutput Voltage 3V to 12V DCMaximum Current 7.5AOperating Temp. -5 F to 140 FController Type Adjustable MicroprocessorSensor Type Thermal Coolant SensorController Weight 10 oz.Dimensions (HWD) 3 3/4" x 2 9/16" x 2"

V6 Water Pump with Metal ImpellerWater pumps on Duratec V6 engines are prone to failure around50,000 miles (some with as little as 30K). The problem lies withtheir plastic impellers which have been known to crack on theshaft (stops turning) or even disintegrate all together. Either way,lack of water flow causes the engine to over heat. The worst

part is the temp. sensor won't tell the gauge to read hot until it's far too lateand the engine is ruined. Don't let this happen to you. Replace the pumps

before 50K. We have sourced a premium quality replacement water pumpwith a cast metal impeller that has proven to be more reliable.

Water Pump with Metal Impeller (gasket included) K421 $69.00Water Pump Driv e Belt K6B $9.25

Electric W ater Pump and ControllerRecently we have had a number of customersquestion us about the feasibility of installing anelectric water pump on the Duratec V6 engine.Some were interested in the 7-10 HP gainassociated with the removal of the standardcamshaft driven mechanical pump. Others werelooking for a way to simplify swapping in somemodel years of the 3.0 V6 engine. After doingsome research based on what pumps haveproven reliable when installed on various typesof race engines in Europe (where electric waterpumps are commonly used) we can recommendthe following components. The water pump is bothlight weight (2 lbs.) and compact in size (5"x5"x3")with directional inlet/outlet fittings to be insertedin the lower radiator hose. It is made from durableNylon and is a centrifugal design with a 300-1300gallon per hour flow rate depending on voltage 4-14 V DC. The pump is controlled remotely by afully adjustable microprocessor unit. The controlunit uses a thermo probe to sense temperature.Set the controller to the desired temperature andit will automatically adjust the rate of coolant flowby regulating the voltage to the pump. Now thewater pump can supply coolant at a flow ratebased on temperature, independent of engineRPM, which equates to more efficient cooling. Thepump can even be wired to run-on after hot engineshut down reducing heat soak. What we hope todo in the future is to further test this system onour own vehicle and as well include a limitednumber of interested "technically oriented"customers who want to do an install and provideus long term feed back.

Electric Water Pump ACP2 $225.00Pump Controler ACP2C $139.00



Accusump Oil AccumulatorThere have been some cases of Duratec V6 engine bearings beingburned up due to lack of oil pressure during hard cornering. Wecan not confirm that this problem will effect all engines, butwe can recommend the best prevention. The mosteffective way to protect wet sump engines from lack ofoil pressure situations is to fit a Accusump oilaccumulator. The Accusump remotely stores a volumeof oil (in this case 1 quart) under pressure to supplementthe engines oil system during maneuvers that cause fluctuationsin oil pressure such as hard cornering, braking and acceleration.. Ifthe engines oil sump pick-up becomes uncovered the Accusumpwill discharge (for up to 20 seconds) supplying oil pressure until theoil supply to the pump is returned. Discharged oil is returned to theAccusump when normal oil pressure resumes. An added benefit is the unitalso pre-oils the engine by supplying oil pressure before start-up. Accusumpmounts remotely in the engine bay and is electrically controlled with a solenoid valve wired to theignition switch.This supplies oil through hose to the oil filter location to an adaptor mounted between the block and the filter. Thisis the oil input to the engine on non oil cooler equipped cars (pictured). For oil cooler equipped cars (most SVT's)we can supply components to run the oil supply directly to one of the engine block oil galleys.

Accusump Kit K2AE $349.00includes 1 quart cylinder (size12" x 3 1/4"), electric valve, hose- 6' length Aeroquip FC333, Aeroquip fittings(1) straight (1) 90 degree, Mocal sandwich adaptor and fittings.

High Performance Oil CoolerWe supply the same high efficiency laminar water to oil heat exchangers that are currently being used throughoutthe racing industry. The Laminova oil heat exchanger consists primarily of two pieces of extruded aluminumprofiles, the core and the shell. The inner surface of the core is optimized for efficient water flow rates, lowpressure drop and minimum risk of fouling. The outer surface of the core is optimized for maximum liquid (oil) to

surface contact, laminar flow, low pressure drop and high heat transfer.The assembly of both sections is sealed with o-rings, ensuring

that the unit is resistant to vibration and pressure pulsation.The Laminova cooling concept can be best described as

an almost infinite number of interconnected laminarcooling fins. Each fin is 3mm in height by only 0.2mmthick. The oil flow gap between the fins is 0.3mm. Bythis arrangement the oil flow is continuously interruptedand restarted after an optimized flow length. An addedadvantage is the coolers ability to deaerate oil thatpasses through the unit. These small and efficientdevices mount easily in modern cluttered engine

compartments. Our Duratec V6 kit includes a 90mmLaminar Cooler with 5/8" hose fittings designed to plumb in

the engine heater coolant circuit with a Mocal sandwich platethat mounts between the block and oil filter to facilitate oil flow to and from the cooler. We also supply Aeroquiphose and fittings for plumbing the oil lines. Note: some SVT's are factory equipped with a water to oil circulatorbetween the block and filter. This "doughnut" type of oil cooler is limited in its capabilities and would be betterreplaced with one of our Laminar Oil Cooler Kits.

Laminar Oil Cooler Kit K2OC $295.00



Baffled V6 Oil PanNew 03 Duratec oil pans offer additional baffling forimproved oil control. We can't come out and saythat this is the answer to oil related engine failurein the 2.5L V6 engines, but it is interesting for Fordto make changes to the 2003 version of the oil panwhile holding the party line "there is no problem". Weall know automobile manufacturers are extremelyreluctant to spend money re engineering parts unlessthere is an issue that requires attention. Is this anadmission on their part? Take it all for what you may, hereis the latest specification oil pan kit that includes all the componentsrequired for installation (pan, drain plug, gasket, and fasteninghardware). Only time will tell if this version of the pan is the definitiveanswer to the Duratec's oil related problems, but at less than $150.00you get quite a bit for your money and it should be considered a cheapinsurance/upgrade.

Baffled V6 Oil Pan Kit K19P $139.00

High Performance Oil Filter SystemThe Canton Mecca spin on filter system is the finest oilfilter available for your engine and since the Duratec hasissues with oil control we feel using the ultimate filter isnot a bad idea. CM filters combine typical spin-on filterconvenience with canister filter performance. A machinedbillet aluminum housing accepts a proprietary high flowreplaceable element. Simply remove (spin-off) the filterassembly, remove the end plate (accessing the element),swap in a new element cartridge, reassemble and spin-on. How is a CM filter different? The filter uses areplaceable "depth filtration" element made of wovensynthetic fibers. Millions of intertwined passages catchcontaminants and provide superb flow characteristics. CMelements filter out particles down to 8 microns and have

a flow rate greater than paper "surface area" filters without the need for a bypass valve (full flow allthe time). Depth filtration filters last longer (as much as 10,000 miles) because of greater area tocatch contaminates without restriction oil flow. If you care to have the absolute best oil filter systemavailable this it the one to have. Also consider that once you own filter the cost of replacementelements are not really much more than premium type spin-on filters and since the elements do notneed to be replaced as often the CM system pays off over time.

Canton Mecca High Performance Oil Filter System K19F $89.50Replacement Filter Cartrage/Insert (1) $10.50Replacement Filter Cartrage/Insert (6 pack) $54.00



33

High Flow Y Pipe & Converter

The standard exhaust Y pipe on the V6 engine cars is quite restrictive. An easy way to pick upsome very tangible performance (8-10hp) is to replace it with our high flow Y pipe and catalatic

converter combo. Primary pipes are custom mandrel bent available in either stainlessor aluminized tubing. The converter is a high flow stainless dual 2" inlet (with

O2 sensor bung) and 2.5" outlet which connects to a stainless steel flexjoint. BAT high flow Y pipe kits connect to all standard andaftermarket exhaust systems using the stock 2 bolt flange.

High Flow Y Pipe- Aluminized K521DA $279.00(aluminized primary pipes, stainless converter, stainless flex)

High Flow Y Pipe- Stainless K521DS $319.00(stainless primary pipes, s.s converter & s.s. flex)

Monza Performance Exhaust for CougarThe Monza cat-back exhaust for the Cougar not only performs well and sounds great, but isalso inexpensive enough for every owner to afford. Systems are made from mandrel bent(2 1/4" center / 2" dual tail) high grade aluminized 16 gauge steel with low restriction mufflerand chrome plated resonated (3 1/4") exhaust tips. The quality on these systems is topnotch. The mandrel bends are free of any shrinkage or distortion for maximumflow and the machine welding is also artfully done. You could not duplicate thissystem at a custom muffler shop for anywhere near the price. A stainlesssystem would also be a good choice, but we don't think there is always theneed to spend the additional money as you wont realize any performanceadvantage with stainless other than the longevity of the material. Note:although designed to fit the Cougar we have successfully installed these onthe V6 Contour as well, you have to fiddle abit with the mountings on therear tips.

Monza Exhaust 1999-02 Cougar V6 K522C $209.00(twin pipes w/polished round resonated tips)

Monza Exhaust Stainless 1999-02 Cougar V6 K522CS DISC(all stainless system, twin pipes w/polished round resonated tips)

Borla Stainless Steel Exhaust SystemsBorla, the leader in stainless steel exhaust system technology offers a number ofselections for the Contour SVT and Cougar cars. These cat-back systemsare extremely well made and offer both tangible power increases and adistinctive sound. Borla exhaust systems are also lifetime warranted. Thecontour SVT system can be adapted to the standard V6 engined cars (two additionalhanger points must be added) and is not a difficult task. There are a number of Cougarsystems available- single outlet and dual outlet systems with an optionally styled (outlets) tips.

Borla Exhaust 1998.5-99 Contour SVT K522S $649.00(twin pipes with polished round tips w/rolled edges)

Borla Exhaust 1999-2000 Cougar V6 K522C2 $649.00(twin muffler- polished round angle cut tips w/rolled edges)

NEW


Product Note:With the ever escalating cost of Borlaexhausts we have been searching for areplacement "high end" system to sell. In factwhen we sell our remaining inventory of Borlathe price will have to go up at least another$50.00 leaving us unsure how much demandthere will be for $700.00 exhaust systems.We have sampled a number of alternativebrand systems and have not been all thathappy with their sound. Most are way too loudand resonate badly at highway cruise. Wewere excited to receive a call from a Bosalrep informing us of their new exhaust for theSVT. Upon receiving and installing a systemall we can say is wow . Great quality, fit, andfor once a manufacturer got it right in thesound/noise department ! Take into accountan a truly affordable price and the Bosalsystem is a slam dunk. (read more below)

NEW


Bosal, one of Europe's largest OE exhaust suppliers, brings their extensive knowledge and expertiseto the aftermarket with their Bosal Performance (once Brospeed) exhausts. These systems exudequality, utilizing heavy gauge T-304 stainless steel which is carefully polished to a show like luster.All joints are flange-fit, so there’s now worry about slip fit joints to work loose and cause leaks.Mufflers come with 3" rolled edge angle-cut tips. If you require, they can be unbolted and swappedout for any of Bosal’s other tips for a different look. Exhaust note is mellow without being raspy ortinny. Another neat feature of this system is the rear mufflers are tunable and can be fitted with anoptional insert baffle if a quieter exhaust note is required. Performance wise one can expect a 6 - 8hp gain, which is most notable above 4000 rpm where the engine feels more "revable". Bosal Systemsare sold with a 5 year unlimited mileage warranty. We feel confident you will agree, when you takeinto account performance quality and price nothing on the market compares. Note: These systemsmay be fit to the non-SVT 2.5L Contours with the addition of a passenger’s side muffler hanger.

Bosal Performance SVT Contour Stainless Steel Cat-Back Exhaust

Bosal Performace Contour SVT Cat-back Exhaust System K522BS $549.00

ExhaustLess -10%494.10 =

SpecialPrice773.10

ExhaustLess -10%494.10 =

SpecialPrice813.10

Y- pipeAluminized279.00 +

Y- pipeStanless319.00 +

Special DealMake it a full system- add a BAT Y pipe (aluminizedor stainless) and save 10% on a Bosal Exhaust.



35

Motor Mounts & H.D. Motor Mount InsertsSVT motor mounts are the logical upgrade for 95-97manual transmission cars. These uprated mounts reduceengine movement and associated problems. H.D. urethanemotor mount inserts are specially designed to fill the "airgap" spaces around standard rubber motor mounts makingthem considerably more firm. Limiting excessive enginemovement also helps to reduce torque steer. Great forboth straight line acceleration and carving up the Auto-Xcourse. Note H.D. motor mount inserts fit 1998 > manualtransmission cars only. Earlier cars (95-97) require SVTmotor mounts prior to fitting H.D. engine mount inserts.

H.D. Motor Mount Inserts* (2 piece) K433B $18.50*install with front mountSVT Motor Mount (front) K433A $43.95SVT Motor Mount (rear) K433C $47.95

Clutch KitsWe supply the Sachs "Super" clutch packages that includeclutch disk, pressure plate, hydro throw-out bearing, andclutch alignment tool. Sachs/Valeo supply more automobilemanufacturers with original cultches than all other clutchcomponent makers combined. Buying one of theseengineered kits will guarantee best quality, performance,ease of installation, and reasonableprice.

Clutch Kit 4 Cylinder (2.0L) K519K $349.00Clutch Kit 6 Cylinder (2.5L) K519K6 $379.00

Torco Synthetic MTFTorco MTF is a specially designed low viscosity syntheticbased gear oil product that replaces ATF in manualtransmissions and transaxles. The increased performanceTorco MTF offers equates to less friction and heatfor extended bearing and syncro life, better shiftquality (especially when cold) and greatlyextended life over standard ATF fluids.Torco is endorsed by many Indy carand drag racing teams and is highlyrecommended by racing transaxlemanufacturers Hewland and Quaife.We could not agree more and standbehind Torco being the very bestsynthetic MTF product available atany price and it will greatly improvethe shift "feel" of Ford's (known to bebalky) MTX75 transmission. Shiftingbecomes light and precise, almostlike a tune-up in a bottle. Note: MTX75 transmissions willrequire 3 quarts (5.5 pint capacity).

Torco Synthetic MTF (quart) K2S $11.50

Torque Biasing DifferentialQuaife torque biasing differentials provide a constant andinfinitely variable output to both front wheels. These uniquedifferentials utilize a series of helical gears which sense the

amount of applied torque andadjust automatically for

loss of traction. TheQuaife limited slipdesign is also free ofhigh wear items

(clutches, ratchetsand plates),making themstronger and moremaintenance free

than other types oflimited slip units.

Anyone who has had thepleasure of driving a vehicle equipped with a Quaife LSDwill immediately comment on its smooth seamlessperformance while getting the power down, very unlikeclutch/plate type LSD's which exhibit a notchy ratchet liketake up through the drive line. Quite simply the finestlimited slip unit available for the MTX75 type transaxle, anda highly recommended upgradeforall 5-speed equippedContour/SVT/Mystique, Mondeo and Cougar cars beingusing the car for motorsports or other high stressapplications. Cars equipped with either the upcomingsupercharger kits will most definitely require a Quaife, astorque steer and the standard differentials inherentweakness will surely become problem. Now with lifetimewarranty and lower price!!!

Limited Slip Differential K710 $695.00



36

Uprated Shift ForksIn the evolution of the MTX75 transaxles, Ford madesome component changes which make senseincorporating into your next rebuild. Shift quality hasnever been a strong suit on these gearboxes,updating to the latest shift forks will certainly help.Improved bearing materials and lubrication makes adifference on these high wear items.

Shift Fork 1st H734 $24.30Shift Fork 3rd H735 $28.15Shift Fork 5th H736 $26.60

Torsen T2 Traction DifferentialThe Torsen T2 LSD is ideally suited to performance FWD applications like the Contour& Cougar. Features full-time torque sensing/biasing for immediate response tovarying driving conditions providing improved traction, acceleration and handling.Torsen differentials are very similar in function, and performance, to the popularQuaife units at almost 100.00 less. For all MTX75 5-speed equipped vehicles.

Torsen Differential MTX75 H710T $599.00

C.V. Boot KitsReplace ripped or torn boots immediately, beforeexpensive C.V. joints become damaged by dirt intrusionor lack of lubrication. We carry handy replacement C.V.boot kits at a great price. Kits include boot, clamps,circlips and specially formulated grease. Boots aresame on 4 & 6 cylinder models. One boot repairs onejoint, 4 total per car- 2 inner, 2 outer.

C.V. Boo t Ki t -Inner K550AK $9.50C.V. Boo t Ki t -Outer K550BK $9.50

Transmission Mounts 2.5L V6Transmission mounts are showing signs of wear on higher mileage cars, orhard use, causing uncontrolled drivetrain movement usually felt as increased"torque steer". In more extreme cases CV joint or axle failure can occur.Replacement is simple with these complete mount assemblies. See belowfor manual transmission (early and late) and auto transmission listings.

Trans Moun t 95-95 MT K433T $98.30Trans Mount 97-01 MT K433TL $115.00Trans Mount 95-01 AUTO K433TA $105.30

Differential Installation ComponentsWe can supply the components required for doing a Quaife or Torsendifferential installation. Items like differential carrier bearings, speedogear and shim assortments make this task much easier. Bearings are soldeach (2 required). Shims are supplied in an assortment of thicknesses.Speedo drive gear fits Quaife differential which uses a 4 cylinder type gear.

Differential Bearing (each) H721 $17.50Shim Assortment Pack (26) H721S $39.00Speedo Drive Gear H716 $6.70

European Side Marker Lamp

Original equipment European Ford Mondeo side marker lamps adda touch of class and an extra degree of safety. Installation requiresdrilling, filing and wiring. We supply instructions and template tosimplify the job. Bulb socket and 5 watt bulb included. Now availablewith clear or smoke lens in addition to standard amber.

Euro Side Marker Lamp Amber (each) K317 $13.50Euro Side Marker Lamp Clear (pair) K317C $29.95Euro Side Marker Lamp Smoke (pair) K317S $29.95



Replacement Bulbs

We carry a range of replacement bulbs for headlamp9005 (high beam), 9006 (low beam), and 880/893(fog) in higher wattages and more efficient gassesfor increased light output per watt. For bulbs withoutput over 80 watts a 12 volt relay should be addedto avoid overloading the standard switch or wiring.

Head Lamp BulbsBulbs for main headlamps (standard is 55w low, 65w high). Allare krypton gas "brite white" offering 10-15% more illuminusoutput over standard bulbs of same wattage. Bulbs projectclean and white without the standard yellow tinge of stock bulbs,or the annoyance of the pseudo HID purple look bulbs.

9005 - 65watt (krypton gas/brite white) Z9005-65 $9.50 each9005 - 100watt (krypton gas/brite white) Z9005-100 $10.50 each9006 - 55watt (krypton gas/brite white) Z9006-55 $9.50 each9006 - 80watt (krypton gas/brite white) Z9006-80 $10.50 each12 Volt Relay w/wiring harness ZRELAY12 $6.50 each

Fog Lamp BulbsWe offer higher wattage (50 watt) replacement bulbs for factory fog lamps (standard is 37 watt).Amber offers reduced glare in rain & snow and is particularly good for fog lamp use.

880/893 - 50 watt Z880/50 $5.50 each880/893 - 50 watt (blue diamond) Z880/50B $9.95 each880/893 - 50 watt (amber) Z893/50G $9.95 each

37



38

Replacement Fog LampsFord Fog Lamp F8RZ-AA15200-AB common on 1995-2001 Contour/Mystique (not SVT). Retail price at the Ford dealer is $49.00 each.We purchased a quantity of brand new assembled units completewith lamp, mounting, adjuster & bulb. Replace your stone chipped,sand blasted, or cracked lamps with two new ones for less than thecost of one at regular price! Contours & Mystiques witout factory foglamps can add lights by buying a headlamp switch for fog lamps at thedealer (most cars are already equipped with wiring and plugs for lights).Lamps measure 3 7/8" diameter and fit a 4" hole and could easily beused in other automotive applications like custom front bumpers and grilles.

Replacement Fog Lamp K349 $17.50 each

Replacement Contour Head Lamps 1998-2001The head lamps on the later 1998 and newer Contours are not as prone lens yellowing, where

the plastic actually becomes opaque, but they are not without theirproblems. The plastic on these lamps tendsto "craze" causing a crows feet cracking effect

on the clear lens. Get maximum luminousperformance again with our affordablereplacement head lamps. Head lamps are

supplied as complete assemblies with bulbs andare DOT certified O.E. type replacements. These are a cost

effective alternative to the expensive 200.00 lamps at the Ford dealer.

Head Lamp Assembly (RH) 1998-2001 K351R $124.50Head Lamp Assembly (LH) 1998-2001 K351L $124.50

Replacement Contour Head Lamps 1995-1997Plastic head lamp lenses take a real beating,literally being sandblasted opaque from roadgrime or turned yellow from heat and excessivesunlight. The lamps on the early Contours (1995-97) are now really beginning to show their age. Getmaximum luminous performance again with ouraffordable replacement head lamps. Lamps are suppliedas complete assemblies with bulbs and are DOT certifiedO.E. type replacements.

Headlamp Assembly (RH) 1995-97 K350R $65.00Headlamp Assembly (LH) 1995-97 K350L $65.00



39

Hella Twin-Tone Electric HornsAnother alternative for drivers looking for a more serioussounding horn set are the Hella twin tone electric's which area simple plug-in replacement for the wimpy stock horns.Powerful 115dB horn kit includes dual plastic hi-low trumpetswith mounting brackets and 12v relay. Add some Europeanflavor to your Euro Ford, and additional safety too.

Hella Dual Electric Horn Set M313 $24.75

Mondeo Roof Mount AerialMost of the newer European cars utilize this type of antenna asthey are both esthetically pleasing and keep the radio signal freeof the engines ECU interferences. This handy European FordMondeo roof mount radio aerial kit includes all the componentsto install a roof mount antenna above the center of the frontwindshield. Supplied components: aerial, mounting base, coaxialcable and connectors, assorted hardware.

Mondeo Roof Mount Aerial Kit K330 $49.00

Hella Dual Air HornsPowerful and penetrating enough to get attention overany level of road noise Hella trumpet type air horns arethe first choice with European drivers. Kit includes dualmetal trumpets (805 hz, 885 Hz), high performancecompressor w/air filter, 12v relay, and mounting bracket.Add some European flavor to your Euro Ford, andadditional safety too.

Hella Dual Air Horn Set M312 $40.00

Cougar Side Marker LensesA different look for your Cougar is to replace thestandard orange side markers with either a clearor smoke/tint lens. Lamp/lenses are O.E. qualitywith chrome dipped reflector bulb holderassemblies. For the price we supply 2 lamp/lenseswith amber colored 5watt bulbs.

Cougar Side Markers (clear) K316C $ 27.95Cougar Side Markers (smoke) K316S $27.95


BAT Inc. 7630 Maroaka. Rd. Sarasota, FL 34234 (941) 355-0005 fax (941) 355-4683

Ford Rally Sport "R/S" EmblemsJust in from Europe are these Ford Rally Sport "R/S" logoemblems. Striking chrome with blue accent runningthrough the center. Emblems are plastic with self adhe-sive backing and are available in two sizes (photo is closeto actual size) small 1 3/4" and large 2 3/4" size.

Emblem "R/S" (small) 1 3/4" H321R 19.45

Emblem "R/S" (large) 2 3/4" H321RL 24.50

Cougar Projector LampsHere's a BAT exclusive, the hot new Cougar color coded projector lamps. We have a sample ofthis stylish, soon to be released, head lamp for the Cougar. Lamps feature a round projector lowbeam, formed reflector high beam, city lamp, clear front turn lens w/ amberbulb and amber side turn indicator. Bulbs are halogen 9005 and 9006type. Lamp interiors are supplied painted "color coded" in thefive most popular Cougar colors (black, red, yellow, blue,green) with other colors available as special order.Unlike the crop of (poor quality and non legal)offshore head lamps for the Honda's, theseCougar lamps are American made and 100%legal. The manufacturer is the O.E. supplierto Ford and the lamps are fully DOT certified.We should have lamps available to sell by April/May2002. Price has not yet been determined but we figure they will be in the $350.00 range for apair. UPDATE 11/02 We are still in discussion with the manufacturer and still hope to offerthese lamps sometime in the future.

Euro Cougar GrilleWe have had a number of recent requests for

this one. European Ford Cougar grilles feature aplastic honeycomb mesh pattern and include blue Ford

oval. Grilles look great and fit US cars without modificationand can be painted if desired. To re-badge the rest of your Cougar

with appropriate Euro Ford emblems see page 35 for more information.Specify early or late (has pointed corners as pictured) see below.

European Ford Cougar Grille 1999-2000 K320C $39.00European Ford Cougar Grille 2001-02 K320CL $29.00(late type shown)

European Badges & Emblems

European Ford emblems and badges give a uniquelook setting your car apart from the rest. Selfadhesive backing for simple installation, just peeland stick. Most are bright chrome on black plastic,except Ford ovals (blue), and Ghia crest (red, blue,chrome). Along the same lines, we are often askedabout fitting European Mondeo sail panels.Unfortunately they do NOT fit our US Contour/Mystique cars.

"Mondeo" Emblem K321M 17.00"Ford" Oval Emblem (large*) 4.5" C321 18.00*(Euro emblem, darker navy blue color)"Ford" Oval Emblem (small*) 3.5" K321 15.00*(Ford blue, same size as used on Contour)"Ghia" Emblem (crest) M352G 16.65"Ghia" Emblem (script) G352G 17.25"R/S" Emblem M352RS 14.00"16V Emblem E321V 6.75"2.0" Emblem K321L2 7.20"Zetec" Emblem K321Z 7.75"Zetec-S" Emblem K321ZS 12.25"24V" Emblem K321V 7.00"V6" Emblem K321V6 8.50"Cosworth" Emblem M321C 23.40"ST200" Emblem K321ST 8.49"ST200" Sticker (intake manifold) K515S 4.95"ST24" Emblem K321S4 8.49



41

emblem/stickerfor intake manifold &front door threshold



42

Permanent Fuel Filler CapGas and go with the Perma-Cap. Do away with the cumbersomestandard "cap on a leash" type Ford fuel cap. Thread on the Perma-Cap and simply insert the fuel nozzle directly into the spring loadedtrap door in the center, add fuel, and remove the nozzle, done!Fast and efficient fueling with no more cap fumbling or scratchedbody work. Cap fully seals when closed, OBII compatable.

Perma-Cap Fuel Filler Cap AFC001 $7.25

carbon

silver

Bullitt Fuel Door/CoverFitting the Mustang "Bullitt" fuel door cover to theContour has become a popular conversion. Capis very nicely constructed in a brushed stainlesslook finish and installs in the existing recess for aflush fit. Finished product looks like it was madefor the car and costs considerably less than tryingto fit a real aviation fuel cap. Use with one of ourPerma-Caps (see above) for the ultimate fast andstylish fill up.

Bullitt Fuel Door H2FC $77.00

Aero Look Filler CapAviation type filler caps are all the rage these days. You seethem on all the show cars and customs. Unfortunately installingthe original article is both costly to buy and even more so tohave installed. If you would like the aero cap look without thehassles or cost we have a good looking alternative in our AeroLook Fuel Door Cover. These are a nicely designed selfadhesive plastic cover that simply covers the existing fuel door.Available in either silver or carbon finish. Use on the flat (remoterelease) fuel door, or (manual fuel door) cut a notch in thecover for the tab.

Aero Look Filler Cover (silver) K325S $24.50Aero Look Filler Cover (carbon) K325C $29.00

NewLower Price



Door Threshold Protectors

European Ford black vinyl door sillthreshold protectors. Although alittle less fancy thaneither the chromeor carbon sill scuffplates, these heavyduty (.5mm) thick3M self adhesivevinyl strips do offermore sill coverageand thus better protection. Customcut for easy installation, in atextured black finish withembossed Ford logo. Install on anew car to prevent damage orcover up the multitude of scuffs andscrapes on your existing ride. Muchcheaper and easier than repaintingthe door sill.

Door Threshold Protectorsset (F& R) K803B $44.50

black vinyl chrome effect carbon effect

Logo Scuff Plates- Chrome

Chrome effect door sill scuff plateswith Mondeo logo. These exclusiveEuropean FordMotorsport scuffplates add a touchof class and protectthe door sill topsfrom damage.Bright chrome"Mondeo" logoshines through a brushed"stainless look" laminate underthick clear plastic. We sampleda number of similar door sillplates (made various forms ofplast ics and metal) beforedeciding these offered theoverall best quality and fit.

Mondeo Logo Scuff Plates (chrome)set (F& R) K803CH $99.50

Logo Scuff Plates- Carbon

Carbon Fiber effect door sill scuffplates with Mondeo logo. Thesee x c l u s i v eEuropean FordMotorsport scuffplates add a touchof class and protectthe door sill topsfrom damage.Bright chrome"Mondeo" logo shines through a"carbon look" laminate underthick clear plastic. We sampleda number of similar door sillplates (made various forms ofplast ics and metal) beforedeciding these offered theoverall best quality and fit.

Mondeo Logo Scuff Plates (carbon)set (F& R) K803CA $114.50



Floor MatsEuropean Ford Foul Weather Mats are made of heavy duty rubber withdeep ridges to catch melting ice, water, mud, spilled coffee or whatever.This type of mat offer the best protection for your interior over the wintermonths or when you know things are going to get messy. Perfectlycontoured for exact fit Foul Weather Mats are also stylish enough foreveryday use. Can be placed over standard plush mats or directly oncarpeting. When dirty or filled with water- remove, hose off, drain, andreinstall.

Floor Mat Set (front & rear) K1010 $55.00

Contour/Mystique Shop Manual

Haynes shop manual covers the 1995-2001Contour/Mystique model cars. These are wellwritten manuals. Certainly better than Chiltons"install in reverse order to removal". Someinformation on European varriants is alsoincluded.

Haynes Shop Manual K204 $14.95

44

Interior Cabin Air FilterStart off the season fresh with a replacement micro-airfilter for your cars interior. It is a nice feature to have a filterincorporated in the HVAC system. Many owners are notaware they even have a filter and they should beserviced yearly. Ford retail price in this filter is $38.00. Wehave the factory Ford filter in a aftermarket box for only$18.50. Fits all years Contour, Cougar and Mystique.

Interior Cabin Air Filter K7F $18.50

Book- The Cosworth Fords

This book covers the production and competition historyof the Cosworth powered production Fords. Sierra RSCosworth & RS500, Sierra Sapphire Cosworth & 4x4,Escort Cosworth 4x4, Scorpio Cosworth, and MondeoCosworth powered touring cars all have dedicated chapters.Lots of rare color and black & white photos, illustrations,information and specifications. Hard bound 8 1/2" x 10 1/4", 248 pages 250 b/w & color photos/illustrations.

The Cosworth Fords M208 $39.50



Carbon Look ST200 Shift KnobHi tech carbon look (plastic) Factory Ford shiftknob from the limited production Mondeo ST200.Specially designed to work properly with theMTX75 transmissions reverse lock-out ring.Comfortable anatomical shape, simple thread-on installation, fits all 5-speed equipped Contour/Mystique/Cougar.

Carbon Look Shift Knob K7ST $62.00

R/S Leather Shift KnobHigh quality European Ford R/S shift knob speciallydesigned to work properly with the MTX75transmissions reverse lock-out ring. All Leather,comfortable anatomical shape, embossed shiftpattern, fits all 5-speed equipped Contour/Mystique/Cougar.

R/S Leather Shift Knob K7KL $65.00

Alloy Look Shift Knob & Hand Brake LeverHi tech alloy effect (plastic) European Ford R/S shift knob specially designed

to work properly with the MTX75 transmissions reverse lock-out ring.Comfortable anatomical shape, thread-on installation, fits all 5-speed

equipped Contour/Mystique/Cougar. Matching alloy effect handbrake lever available (see below).

Alloy Look Shift Knob K7KA $49.00

Hi tech alloy effect (plastic) European Ford R/S hand brakelever is the perfect match for the alloy look shift knob.

Comfortable anatomical shape with 3 rubber non slip rings onthe grip end, simple installation, fits all Contour/Mystique/Cougar.

Alloy Look Hand Brake Lever K564HA $59.00

R/S Aluminum Shift KnobNew from the Focus R/S turbo comes this high quality aluminum shiftknob, specially machined to work properly with the MTX75 transmissionsreverse lock-out ring. Knobs aluminum construction has some weightto is and a nice feel. Comfortable round shape with (blue) embossedshift pattern, and R/S logo. Fits all 5-speed equipped Contour/Mystique/Cougar.

R/S Aluminum Shift Knob H7RS $95.00

of 5BAT Inc. 7630 Matoaka Road. Sarasota, FL 34243 (941) 355-0005 fax (941) 355-4683


CURRENT SPECIALS

PAGE 1 of 5

15" Wheel & Tire SpecialNeed some winter wheels & tires, or want to updatea car from 14" steelies? We have a supply of newcar takeoff 15" Focus wheels with 195x60x15"Firestone Firehawk or Goodyear Eagle Tires. Yourchoice on style, either 5 spoke or multi spokedesign. Wheels fit all 4x108mm et45-50applications (Contour/Mystique, Cougar, Focus).We have seen these selling, on average, in the$400.00 range for used sets. Our special is only$399.00 for the set of NEW wheels & tires mountedwith center caps (ups shipping $15.00-$20.00 perwheel w/tire additional). Wheels are also availableseperately in sets of 4 for $199.00.

15" Wheel Deal H412WD $399.0015" Wheels (4) no tires H412W $199.00

5 SpokeWheel

16" Wheel & Tire SpecialNew car takeoff's -16" Focus wheels and 205x50x16" FirestoneFirehawk GTA/02 tires. Wheels fit all 4x108mm et45-50applications (Contour/Mystique, Cougar, Focus). We have seenthese selling, on average, in the $400.00 range for used sets.Our special is only $449.00 for the set of NEW wheels &tires mounted with center caps (ups shipping $15.00-$20.00per wheel w/tire additional).

16" Wheel Deal H411WD $449.0016" Wheels (4) no tires H411W $239.00

Multi-SpokeWheel



Cougar DealsWe just uncovered a cache of Cougar bits leftover from production of the limited edition XR/C2 mod-els. These cars were equipped with some sporty looking body dress-up items. As usual quantities arelimited get-em while you can.

Cougar Rear SpoilersLimited Edition XR / C2 rear wingspoilers. These are also the same asspoiler Mercury sold as a Rousch dealerinstalled accessory for the Cougar. Spoilermounts at both corners and is raised off the trunk inthe center with a curved lip at the rear edge. Looks and fitsgreat as only original equipment parts do. Spoiler is supplied in(red) with mounting studs and soft foam pad at corners. We looked this upwith Ford and were shocked at the price- $875.00 retail ! We can do much better,how's $99.00 - that's even less than similar lesser quality aftermarket copies of this one.Notes: supplied color is red (if your car is red good- if not paint to match), we can not be responsiblefor any blems in the red finish, scoops fit all stock cougar trunks without modification.

Cougar Rear Spoiler K306CR $99.00

Euro Cougar GrillesWe are way overstocked on 2001-02 European Ford Cougar grilles. Theyfeature a plastic honeycomb mesh pattern and include blue Ford oval.Grilles look great and fit US cars without modification and can bepainted if desired. Our regular price is $39.00, now onspecial for $29.00 -untill stock is lowered to managablelevels.Euro Grille Cougar 2001-02 K320CL $29.00

Hood ScoopsHood scoops, again another Cougar XR/C2 or

Rousch dealer installed accessory. Definitely a coollooking, well made, moulded plastic scoop. Mounts with

incorporated mounting studs and self adhesive tape (supplied). Wechecked this one for price with Ford, $437.00...Ouch ! We should not have

any problem selling these for only $119.00 . Notes: supplied color is red, if yourcar is red good, if not paint to match- we can not be responsible for any blems in the red

finish, scoops fit all stock cougar hoods without modification.

Cougar Hood Scoop K813CS $Sorry- Sold Out



- Important Notice -Some of the equipment in this catalog is intended for racing or off-highway use in the United States. BAT Inc. ships all over the world sowe must make it the responsibility of the customer to check the legality of fitting any part to his/her car. There are many different State,Federal and provincial regulations governing the replacement of automotive parts and BAT assumes no responsibility or liability for theirillegal use. Please check the regulations in your area before ordering.

TERMS OF BUSINESSHours of OperationOrder desk hours are Monday through Friday 9:00 a.m. until 5:00 p.m. Eastern Time. Whenever possible orders received before 12:00 noonwill be processed and shipped the same day. If anyone would like to visit our location we would like to request that you please make anappointment before dropping by. We enjoy seeing our customers, discussing their cars, and showing them our latest developments,however, some days or times of day are better for us to give the attention we like to offer.

Ordering ProcedureYou may place an order by telephone, fax, or by mail. Ordering by telephone will connect you to a technical-sales advisor who willhelp with any questions, or make ordering recommendations, if you require. Knowing your 6 digit BAT customer number, catalog partnumbers, quantities, and description of order items will help minimize any possible errors in processing your order. Telephone ordersmay be placed during business hours as listed above. Fax orders may be placed anytime day or night.

PaymentPayment may be made by Visa, Master Card, Amex, Money Order or Personal Check. Orders which have been paid for by PersonalCheck will be shipped only after the check has cleared (allow up to 14 days). Orders accompanied by Personal Checks that havebeen bank certified will be shipped with out delay. We have no objections to shipping on a COD basis if required, however, all COD'smust be paid upon delivery with money order or certified check. When ordering by mail or fax by Visa or Master Card be sure to includeyour card number and expiration date. Residents of countries outside the United States must prepay for their goods in U.S. currency.All prices for goods shipped outside the continental United States are quoted FOB Sarasota, FL. All shipping/duty charges must bethe responsibility of the consignee at rates applicable to that particular country.

ShippingUnless otherwise stated all orders will be shipped by United Parcel Service (UPS) surface system. Actuall UPS rates are charged basedon package weight , zone (distance traveled from source) and insured value. We do NOT charge additional "handling" fees. We canalso offer express (overnight, 2 day or 3 day) service if required, check with us for details and additional charges. Items too large orheavy for UPS service will be shipped common carrier (truck) freight collect. Optional shipping services include Surface Mail, Air Mail,and Air Freight at current rates.

Back OrdersWe dislike back orders as much as you do, and although we carry a huge inventory of merchandise it is inevitable that we will sometimesrun out of certain items. In this case we will hold the order open and ship the back ordered item directly when the item becomes available.We NEVER charge for back order items until they actually ship. If an item looks like it will be on back order for longer than 4 weeks wewill try and let you know the approximate time of delivery. You will then have the opportunity to reconfirm or cancel your order.

Privacy & SecurityYour personal information is used/maintained to facilitate the services you request and provide you with a smooth, efficient service. Asa matter of policy, personal data is strictly used for internal purposes only. BAT treats personal data as an asset that must be protectedagainst loss and unauthorized access. Our main computer network is NOT connected to any outside source and we employ manydifferent security techniques to protect all data from unauthorized access.

Special OrdersSome items that we offer are available as special orders. This includes custom variations on catalog items and race prepared parts. Allspecial order items require a 50% deposit at the time the order is placed with the balance due at time of shipping. You will be advised at thetime of your order if any item falls into this category.

ReturnsAll returns must be authorized by BAT with in 30 days of the invoice date and must be sent prepaid. Returns must have an authorized RGA numberand be accompanied by a copy of the original invoice. A restocking charge of 20% may be assessed at our discretion depending on the reasonfor the return. Certain parts such as bearings, books, electrical items and piston rings or any part that has been modified or installed in any way arenot returnable. Return items totaling less than $20.00 can be returned for store credit only.

WarrantiesAll parts are covered only by the manufacturers warranties and/or guarantees. BAT Inc. can assume no responsibility or liability for useor application by the user. Claims for goods damaged in transit are the responsibility of the carrier. You should always examine thecontents of your package and notify the carrier immediately if there is any sign damage.

bat catalog - contour

Documents