basic engineering, standart specification for pipe,valves

The information in this document is the exclusive property of PETROAMAZONAS EP and should not be used for other purposes than those specified.

INGENIERÍA BÁSICA

APROBADO

ELABORADO POR: EDWIN OQUENDO

FECHA: 04/11/2014

FECHA: 04/11//2014

APROBADO POR PAM EP: CARLOS GUDIÑO

BASIC ENGINEERING B43

Department: Gerencia de Proyectos

Document: Standard Specification For Pipe, Valves & Fittings

Document Code: 43B011-CPT-50-SP-004

Revision: Date: Prepared by: Reviewed by: Approved by:

1

04-Nov-2014 E.Santillán C. Gudiño R. Silva

Revision History

Revision: Date: Revised Pages: Issued:

A 29-Sep-2014 All For Review

B 29-Oct-2014 All For HAZOP

0 31-Oct-2014 All Final Basic Engineering

Final Basic Engineering 1 04-Nov-2014 45,48,82-84,87-88

101-105,129,186-187 Final Basic Engineering

Distribution Control

Location of Document: Controlled Uncontrolled

Project Management X

Departmental Assistants and Coordinators X

Electronic Information System

X


Standard Specification for Pipe, Valves & Fittings

Department: GERENCIA DE PROYECTOS

Code No.: 43B011-CPT-50-SP-004

Revision: 1

Page No.: 2 of 196


Index

1 SCOPE 3

2 APPLICABLE STANDARDS & CODES 3

3 GENERAL REQUIREMENTS 4

3.1 Pipe 5

3.2 Flanges 6

3.3 Fittings 6

3.4 Valves 7

3.5 Buried and inaccessible double-block-and-bleed valves 9

3.6 Pipeline valves 10

3.7 Operators 10

4 MATERIALS 11

5 PIPE SUPPORTS 12

6 WELDING 13

7 INSPECTION 13

8 PRESSURE TESTING 13

9 PAINTING AND COATINGS 13

10 THERMAL INSULATION 13

11 INSULATING GASKETS/KITS 14

12 IDENTIFICATION OF PIPING AND VALVES 14

12.1 Line identification 14

12.2 Line service 15

12.3 Valve identification system 16

12.4 Description 16

12.5 Piping specification identification 17

13 BRANCH CONNECTIONS 18

13.1 Split tees 19

14 SPECIFICATIONS LIST 19

15 ANNEXES 153





Revision: 1

Page No.: 3 of 196


1 SCOPE

This specification defines the minimum requirements for pipe, valves, and fittings on process and

utility piping systems. This specification includes materials, fabrication, welding, inspection, and

testing and shall apply to all piping installed by or prefabricated for installation by Contractor or to

Contractor’s order for use on the PETROAMAZONAS EP onshore production facilities as part of

the development of 43 Block in the oriental rain forest zone of Ecuador.

2 APPLICABLE STANDARDS & CODES

Piping shall be designed, constructed, and tested in accordance with the latest edition of

ASME B31.3, "PROCESS PIPING" or ASME B31.4 “PIPELINE TRANSPORTATION

SYSTEMS FOR LIQUIDS AND SLURRIES”, whichever applicable, and this specification.

Steam line and Power Generation Systems must be designed, built, and tested according to

the latest edition of ASME B31.1.

The following standards (the latest edition) shall apply during preparation of all piping

drawings and during description of materials for Class 150 through Class 2500:

Standard/Code Description Standard/Code

Process Valve Qualification Procedure API RP 591

Specification for Line Pipe API Spec 5L

Specification for Pipeline Valves API Spec 6D

Specification for Fire Test for Valves API Spec 6FA

Fire Test for Check Valves API Spec 6FD

Specification for Quality Programs for the Petroleum, Petrochemical and Natural Gas Industry

API Spec Q1

Check Valves: Flanged, Lug, Wafer and Butt-welding API Std 594

Valve Inspection and Testing API Std 598

Steel Gate Valves - Flanged and Butt-welding Ends, Bolted Bonnets API Std 600

Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries

API Std 602

Fire Test for Soft-Seated Quarter-turn Valves API Std 607

Metal Ball Valves - Flanged, Threaded and Welding Ends API Std 608

Butterfly Valves: Double-flanged, Lug and Wafer Type API Std 609

Type Testing of Process Valve Packing for Fugitive Emissions API Std 622

Unified Inch Screw Threads, UN and UNR Thread Form ASME B1.1

Pipe Threads, General Purpose (Inch) ASME B1.20.1

Gray Iron Pipe Flanges and Flanged Fittings Classes 25, 125 and 250

ASME B16.1

Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 ASME B16.5

Factory-Made Wrought Buttwelding Fittings ASME B16.9

Face-to-Face and End-to-End Dimensions of Valves ASME B16.10

Forged Fittings, Socket-Welding and Threaded ASME B16.11

Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed

ASME B16.20

Nonmetallic Flat Gaskets for Pipe Flanges ASME B16.21





Revision: 1

Page No.: 4 of 196


Standard/Code Description Standard/Code

Buttwelding Ends ASME B16.25

Valves Flanged, Threaded and Welding End ASME B16.34

Orifice Flanges ASME B16.36

Large Diameter Steel Flanges: NPS 26 Through NPS 60 ASME B16.47

Square and Hex Bolts and Screws - Inch Series ASME B18.2.1

Square and Hex Nuts (Inch Series) ASME B18.2.2

Power Generation Systems ASME B31.1

Process Piping ASME B31.3

Pipeline Transportation Systems for Liquids and Slurries ASME B31.4

Welded and Seamless Wrought Steel Pipe ASME B36.10

Stainless Steel Pipe ASME B36.19

Industrial valves -- Measurement, test and qualification procedures for fugitive emissions

ISO 15848

Standard Marking System for Valves, Fittings, Flanges and Unions MSS SP-25

Specification for High-Test Wrought, Butt-Welding Fittings MSS SP-75

Bronze Gate, Globe, Angle and Check Valves MSS SP-80

Class 3000 Steel Pipe Unions Socket Welding and Threaded MSS SP-83

Swage(D) Nipples and Bull Plugs MSS SP-95

Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and Buttwelding Ends

MSS SP-97

Instrument Valves for Code Applications MSS SP-105

The following procedures (the latest edition) shall apply during preparation of all piping

drawings and during description of materials for Class 150 through Class 2500:

Approved WPS B15-ECU-50-PR-023

Structural Steel Skid Mounted Assemblies B15-ECU-20-SP-009

Technical Specification for Thermal Insulation 43B011-CPT-20-SP-015

Manufacture And Installation of Pipes Underground and Aboveground

PAM-EC-20-PRC-005

Hydrostatic Test For Process Pipe PAM-EC-20-PRC-007

Coating Specification PAM-EC-50-SP-001

3 GENERAL REQUIREMENTS

Engineering drawings, where provided, indicate the minimum line size, design working

pressure or piping class, valves required, etc.

For services of transportation crude oil and water reinjection, the engineering companies

must confirm the wall thickness with the Hydraulic Calculations of lines.

The maximum design conditions specified in the Piping Class Specifications Note 1 are

separate requirements and neither shall be exceeded.

Unless otherwise specifically authorized by PETROAMAZONAS EP, the materials specified

in these General Specifications shall be strictly adhered to in the design, purchasing and

fabrication of each piping system. When the specified pipe, valves and fittings or other

materials cannot be obtained, substitution may be permitted with the written approval of





Revision: 1

Page No.: 5 of 196


PETROAMAZONAS EP.

Line marking and identification of valves shall be in accordance with Section 12 herein.

Contractor’s standard markings and identification may be used with the written approval of

PETROAMAZONAS EP.

3.1 Pipe

All pipes shall be marked per API Spec 5L, ASTM A-53 or ASTM A-106: name or

manufacturer’s marking, specification, specified dimensions, grade and class,

product specification level, process of manufacture, heat number and an

identification number.

Pipe wall thickness shall conform to Piping System Specifications.

Piping Class 150 through Class 2500. Piping 1 ½” NPS and smaller may be

threaded, flanged or socket welded as indicated by the Piping System

Specifications. Piping 2” NPS and larger may be threaded (Only for Specs J and

L), butt welded or flanged as indicated by the Piping System Specifications.

When socket weld piping is used, unions will be installed at accessible locations to

permit removal and replacement of all valves and equipment. With the exception

of vents, drains, samplers and instrument connections, piping 1½” NPS and

smaller shall be socket welded or flanged for the following services:

Hydrocarbon services Class 1500, 2500 pressure ratings and above.

Hydrocarbon services above 250 F.

Hydrocarbon services subject to vibration or pulsation.

Piping shall be located so as not to present overhead or tripping hazards. Minimum

clear headroom for overhead piping shall be 7 foot 0 inches (2.15 m). Lines which

cross shall not touch.

Piping systems shall be designed so that all valves and instruments can be

serviced conveniently. When this is impractical, ladders and platforms designed in

accordance with PAM EP Specification B15-ECU-20-SP-009 "STRUCTURAL

STEEL SKID MOUNTED ASSEMBLIES”, shall be used.

Emergency shutdown valves shall be accessible from deck or floor level and are

to be located in clear areas.

All carbon steel pipe nipples ¾” NPS and smaller shall be a minimum of SCH 160

SMLS steel pipe. "All-Thread" nipples shall not be used. A nipple shall be defined

as any section of pipe 12” or less in length.

Seal welding of threaded piping shall not be permitted.

PTFE (Teflon) tape shall not be used for service temperature greater than 400°F

(204°C) on threaded connections, for higher temperatures socket welded

connections are preferred.

Temporary start-up cone or basket-type strainers (screens) shall be provided in

suction lines to mechanical equipment, including, but not necessarily limited to

pumps, compressors and mechanical meters and shall be located as close as

possible to the inlet flange. Such strainers shall have a minimum of 200% of the





Revision: 1

Page No.: 6 of 196


line flow area with 1/8” diameter maximum size perforations. For Strainers

Specifications, see ANNEX No. 1.

During fabrication, installation, sandblasting and painting, care shall be exercised

to keep blast sand, dirt and other foreign matter out of all piping systems prior to

assembly. Prior to acceptance by PETROAMAZONAS EP, the interior of piping

systems shall be thoroughly cleaned by Contractor.

Drain connections and valves shall be provided at all low points in lines. Also, vent

connections and valves shall be provided at all high points where gas may be

trapped. Vent, drain and instrument connections ¾” and smaller may be installed

using 3000# or 6000# threadolets, except for high temperature or other service

where sockolets are specified by the Piping System Specifications.

The corrosion coupons connections shall be installed using Access Fittings,

COSASCO type or similar. For Access Fittings Specifications, see ANNEX No. 2.

Changes in pressure rating of piping systems shall be made at valves. This valve

shall carry the rating of the higher pressure system.

Laterals (sub-headers) for instrument gas or air systems shall have block valves

at the primary header and branch off from the top of the primary header.

Insulating gaskets shall be installed when joining piping components or dissimilar

metals to prevent galvanic corrosion and/or when there are changes between

underground with cathodic protection and aboveground lines. GPT VCS Insulating

Kits is the reference model, different brands may be used prior PAM EP approval.

For Insulating Kits Specifications, see ANNEX No. 3.

Flow lines piping, between wellhead and manifold, shall be externally coated with

FBE (fusion bonded epoxy). For FBE specifications, see ANNEX No. 11.

3.2 Flanges

All flanges shall be marked per ASME B16.5 and/or MSS SP-25: country of

manufacture, manufacturer's name or trademark, material, rating designation,

conformance with the B16.5 Standard, size, schedule (if applicable) and an


Flanges Class 900 and above shall be RTJ. Flanges Class 600 and lower may be

RF or FF, with serrated spiral finish.

Weld neck flanges are required for all flanged piping.

Steel flanges used to mate with equipment having cast iron, ductile iron or

aluminum flanges shall have the faces machined flat (FF).

Flange bolt holes shall straddle the piping horizontal and vertical center lines.

API flanges rated at 2000, 3000 or 5000 PSI shall be Type 6B. For API Flanges

Description, see ANNEX No. 9.

3.3 Fittings

All fittings shall be marked (if applicable) per ASME B16.9, ASME B16.11 and/or

MSS SP-25: country of manufacture, manufacturer's name or trademark, material,





Revision: 1

Page No.: 7 of 196


product conformance, size, schedule number or class designation and an


All 90° welded elbows shall be long radius (LR), unless restricted by available

space. If short radius welded elbows are used, they shall be derated to 80% of the

calculated allowable working pressure.

Eccentric reducers installed with the straight (flat) side up shall be used when line

size reductions are required for pump suction connections.

Street elbows shall not be used unless approved by PETROAMAZONAS EP.

Bleed rings shall be according to material of pipe, stainless steel or carbon steel.

For Bleed Rings Specifications, see ANNEX No. 4.

All welded elbows related to flow lines, between wellhead and manifold, shall be

externally coated with FBE (fusion bonded epoxy). For FBE specifications, see

ANNEX No. 11.

3.4 Valves

Valve materials specified herein are the minimum required by PAM EP. In the case

that there exist the same or better materials with tested performance for the

specific application, their acceptance will be responsibility of the technical

evaluator.

All valves shall be marked per ASME B16.34, API Spec 6D and/or MSS SP-25.

All the valves manufacturers (gate, globe, check and butterfly with exception of API

6D valves) will have to apply the API RP 591: PROCESS VALVE QUALIFICATION

PROCEDURE. This recommended practice provides recommendations for

evaluation of a construction and quality assurance program for the purpose of

determining a manufacturer's capability to provide new valves manufactured in

accordance with the applicable API standards.

Valves shall be furnished as called out on the Approved Valve Lists. Alternate

valves which are equal to the valve list requirement may be used only after

obtaining the written approval of PETROAMAZONAS EP.

All valves shall be installed in accordance with temperature and pressure ratings

recommended by manufacturer and within limits of the ASME B16.34 Code for the

applicable service. Flanges and flange facings on valves shall match that specified

by the applicable Piping Class Specification. The wall thickness of the valves gate,

globe and check shall be under API 600 and API 602.

All valves for hydrocarbon service shall be steel. Valves 2” and larger shall be

flanged and 1½” and smaller may be threaded, flanged or socket welded as

indicated by the Piping Class Specification. Contractor shall not add flanges to

threaded, socket weld or butt weld connections on valves unless specifically

approved. Secondary threaded valves must be easily removable.

The valves for Fire Water System shall be:

Valves 3” and smaller: Cast Bronze body and trim. Threaded ends.

Valves 4” and larger: Cast Iron body and Bronze trim. FF flanged ends.





Revision: 1

Page No.: 8 of 196


Ball valves shall be fire safe design and shall meet the following additional

specifications.

Ball valves shall be trunnion mounted with secondary metal seal, as following:

For Class 150: 8” and larger.

For Class 300: 4” and larger.

For Classes 600, 900, 1500 and 2500: 2” and larger.

All trunnion mounted ball valves shall be supplied with grease fittings for stem

and seals.

Secondary metal seal is not required for 1½” and smaller ball valves.

Manual gear operators shall be furnished on all quarter turn valves in any

application where breakaway torque requirements exceed 50 foot pounds.

Generally:

6” and larger Classes 150 and 300.

4” and larger Classes 600, 900 and 1500.

2” and larger Class 2500.

For Hydrocarbon Process and Instruments Air, ball valves 1½” and smaller

shall be ASTM-A351 Gr CF8M or 316 SS body, with 316 SS ball and stem for

piping specfications where the piping material is of similar composition. In

piping specification with Carbon Steel piping, forged carbon steel materials

shall be used.

Block valves shall be provided downstream of check valves to allow isolating the

check valve for servicing without the need to de-pressurize downstream piping

systems. Vent valves, if applicable, shall be installed to facilitate de-pressuring

piping upstream of check valve and upstream of check valve for leak testing of

check valves.

Check valves can be reduced or full flow, swing check in all cases except for

reciprocating pump or compressor service where ball or piston type check shall be

used or where the piping specification permits wafer type check valves in utility

services.

All check valves 2” and larger shall be furnished with bolted bonnets.

All check valves 4” and larger shall be provided with ½” NPT tap and plug in

the body.

Gate, Globe and Check valves shall have hardened (stellite or equal) seats. The

check valve can have removable or integral seats. Globe valves may be straight

or angle type to suit piping configuration.

All gate and globe valves shall be OS&Y (outside screw and yoke). Inside screw-

rising stem not will be accepted.

Needle valves shall be supplied when shown on the flowsheets and assembly

drawings. Needle valves, except where required for high pressure and/or

temperature service, shall be soft- seated and full 316 SS construction.

For ball valves, the ball rotation shall be counter-clockwise when facing the stem





Revision: 1

Page No.: 9 of 196


so that the initial valve opening is at the bottom of the pipe.

Small steel threaded and socketweld end valves that are accessories to the main

valve shall have a minimum body rating equivalent to API STD 602, Class 800.

All sealant injection fittings shall be one-piece giant buttonhead type with internal

check valve mechanisms, and shall be equipped with safety vent caps.

When the service or location present environmental concerns, shall be evaluated

the requirement of qualification and testing of valve packing according to ISO

15848 or API 622.

3.5 Buried and Inaccessible Double-Block-and-Bleed Valves

Buried and inaccessible double- block-and-bleed valves shall have the drain, vent

and sealant injection connections (if applicable) extended above ground in

accordance with the figure 1 and as per the following requirements:

All piping (schedule 80 minimum), valves and fittings shall have corrosion

resistance at least equal to the main valve body material, and shall be SS

316L as a minimum. The entire piping system shall be coated with the same

coating system as the main valve.

Compression fittings shall not be used.

Unions are permitted only in the extended lines of in-line repairable valves

(top-entry ball valves and through conduit gate valves) at a suitable location

to facilitate removal of the bonnet.

The drain and vent connections shall be piped up to approximately 250 mm

below the operating level and shall terminate in a horizontally-installed block

valve fitted with an NPT-threaded steel plug.

The sealant injection lines shall be piped up separately to approximately 250

mm below the operating level and terminate in a horizontally-installed one-

piece sealant injection fitting giant button-head type with internal check valve

mechanism. An additional check valve shall be provided at the location where

the sealant injection line enters the valve body.

All piping shall follow the valve contour as closely as possible and shall be

rigidly connected to the valve and stem extension.

Fully and partially buried valves shall be entirely coated with a below grade

coating as specified in PAM EP’s specification PAM-EC-50-SP-001 “Coating

Specification”.





Revision: 1

Page No.: 10 of 196


Figure 1: Valve connections

3.6 Pipeline Valves

API SPEC 6D valves (ball & gate) shall be designed to withstand a compressive

axial thrust, exerted by the piping without permanent distortion of the body and

without jamming the gate/ball between the seats. The Vendor shall have

conducted tests on representative samples to demonstrate satisfactory valve

performance under pipeline compression and/or bending loads.

3.7 Operators

Gear boxes shall be dust and weather-proof and filled with a lubricant suitable for

operation up to 80°C.

Gear operators for quarter turn valves shall be equipped with a self-locking system.

All valves operators/actuators mechanisms (including hand-wheel, lever, gear and

power) shall be designed to stroke the specified valve from the fully open position

to the fully closed position and vice versa, under the worst process operating

conditions (breakaway, running, seating).

The maximum (human) operator force required to seat or unseat the valve at the

INDICATE SEAL WELDING LOCATION

Vent Valve and Drain Valve;

gate or ball; minimum rating

equivalent to API 602, Class

800; fitted w/NPT threaded

plug.

Extended drain piping,

Sch.80, AISI Type

316LSS (epoxy

coated).

Seal sealant injection

piping, Sch.80, AISI

Type 316L SS (epoxy

coated)

Seal sealant injection

fitting w/integral check

The drain & vent

connections shall be piped

up to approx. 250mm (10in)

below the operating level.





Revision: 1

Page No.: 11 of 196


maximum specified differential pressure shall not exceed 360N ( 80 pounds) at the

rim of the hand-wheel.

4 MATERIALS

All materials (Pipe, Fittings, Flanges, etc.) shall include: country of manufacture,

manufacturer's name and/or logo and heat number and be provided with quality certificates

to enable its traceability.

All materials for Pipe, Valves, Fittings, Flanges, Bolts, Gaskets and Special Parts, shall be

in accordance with Piping Class Specifications.

The quality management system requirements for the design, development, production,

installation and service of products for the petroleum industry, must be prevailed per API

Spec Q1: “Specification for Quality Programs for the Petroleum, Petrochemical and Natural

Gas Industry”.

All Pipe, Valves, Fittings, Flanges, Bolts, Gaskets and Special Parts, supplied by Contractor

shall be new and unused, free of mill scale, dents, cracks, laminations, pits and detrimental

rust or oxidation.

PETROAMAZONAS EP reserves the right to inspect all Contractor supplied materials and

components, and to reject those deemed unusable for use and not conforming to these

specifications.

No pipe, valves or fittings of brass, aluminum, cast iron, malleable iron, steel-iron or semi-

steel shall be used in hydrocarbon service. Cast Bronze or Cast Iron body valves will be used

Only for Fire Water Systems and Foot Valves.

Cast iron valves shall be flanged per ASME B16.1.

Threaded piping shall be sealed using a combination of liquid anaerobic sealant (such as,

but not limited to Loctite® 567™ or 592™) and Teflon tape. Care shall be taken to prevent

extension of the tape into the pipe. Excess tape shall be removed prior to painting.

All new pipe, flanges and fittings shall be marked with mill and material identification. All

pipes shall be accompanied with mill test reports, and flanges and fittings shall be

accompanied with mill material certifications from manufacturer.

All threaded galvanized pipe shall be painted after assembly with cold galvanizing.

The filler material for all gaskets shall be “Flexible Graphite (FG)” and will only be accepted

from USA and ITALY. For Gaskets Specifications, see ANNEX No. 5.

All welded joints related to flow lines, between wellhead and manifold, shall be coated with

3M Scotchkote 323.

When butt welding end valves are made of carbon steel with a specified minimum yield

strength of 289 MPa (42,000 psi) or higher, the maximum carbon content shall not exceed

0.23% as specified in API SPEC 6D Section 7. For fabricated valves, this limitation applies

only to the ends.

Unless otherwise specified, when hardfacing is required it shall be Stellite No. 6 or equal with

a resultant minimum hardness number of 350 HB.

Electroless nickel plating (ENP) on carbon and low alloy steel substrates shall be applied in





Revision: 1

Page No.: 12 of 196


accordance with the requirements of ASTM B733, SC4, Type III, Class 3, (carbon steel or

low alloy substrate)/NiP10 75.

Valves Trim materiales shall be selected on the basis of the general recommendations of

this specification and the proper engineering analisys for each application, as reference, a

simplified version of API 600 trim number table is showed in table 1 herein :

TRIM NO. BODY SEAT

SURFACE MATERIAL CLOSURE MEMBER

SURFACE MATERIAL

1 13 CR 13 CR

2 SS 304 SS 304

3 SS 310 SS 310

4 13 CR Hardened 13 CR Hardened

5 Stellite 6 hardfacing Stellite 6 hardfacing

5A NI-CR hardfacing NI-CR hardfacing

6 13 CR CU-NI

7 13 CR hardened 13 CR

8 Stellite 6 hardfacing 13 CR

8A NI-CR hardfacing 13 CR

9 Monel Monel

10 SS 316 SS 316

11 Monel NI-CR or Stellite 6 hardfacing

12 SS 316 NI-CR or Stellite 6 hardfacing

13 Alloy 20 Alloy 20

14 Alloy 20 NI-CR or Stellite 6 hardfacing

Table 1: Simplified Trim Numbers

5 PIPE SUPPORTS

Piping shall be supported as necessary to prevent sagging, mechanical stresses and

vibration. Piping shall be adequately supported on racks, stanchions or individual standoffs.

Welding of supports directly to the internally coated pipe, except shoes using in thermal

insulating pipe, shall not be permitted unless authorized in writing by PETROAMAZONAS

EP.

U-Bolts securing pipe to pipe supports shall be galvanized with 1/16” polyethylene sleeve,

flat washers and double nuts. A 1/8” neoprene or polyethylene pad spacer shall be placed

between the pipe support and bottom of pipe. Minimum U-bolt diameter shall be 1/4". For U-

BOLTS Dimensions, see ANNEXJ.

Piping 8” and larger and any smaller piping subject to excessive mechanical vibration or line

pressure pulsation’s (e.g., rotating equipment piping) shall be fastened to substantially rigid

pipe supports with bolted pipe clamps in lieu of U-bolts. Pipe clamp bolts shall have double

nuts.

Piping subject to expansion may be either suspended from adjustable or swivel type hangers

or supported from below. If supported from below, steel slip shoes and guides shall be

provided. Anchors and stops shall be provided to maintain movements and forces within

acceptable limits.





Revision: 1

Page No.: 13 of 196


6 WELDING

Where potential galvanic corrosion does not exist, standard joints and welds are acceptable.

Socket weld joints are not permitted in location where high vibration can occur (such as high

velocity gas control valves and reciprocating pumps).

The maximum size of socket-welded joints in hazardous services shall be 1½-inch for new

construction. Maximum 2-inch may be used in hazardous service for maintenance, minor

field modifications of existing piping systems, and when necessary to match existing

equipment connections.

Contractor shall qualify its own Welding Procedure Specifications and qualification records,

these specifications and records shall be submitted to PAM EP for its review and approval.

Welded joints in carbon steel shall be stress relieved in accordance with ASME B31.3 when

the nominal pipe wall thickness is greater than ¾”. The piping shall be brought to temperature

and cooled in accordance with ASME Section VIII, Paragraph UCS-56.

7 INSPECTION

Inspection of all piping shall be performed in accordance with Procedure PAM-EC-20-PRC-005

“MANUFACTURE AND INSTALLATION OF PIPES UNDERGROUND AND ABOVEGROUND”. If

the inspection is performed in accordance with Contractor Specifications, these procedures shall

be submitted to PETROAMAZONAS EP for approval.

8 PRESSURE TESTING

All pressure testing of pipe shall be performed in accordance with ARCH (Agencia de Regulación

y Control Hidrocarburífero) Regulations and PAM EP’s procedure PAM EP-ECU-QAQC-20-PRC-

009 “PRUEBAS DE PRESION EN TUBERIAS DE PROCESOS”.

9 PAINTING AND COATINGS

Surface preparation and painting of pipe, valves and fittings shall be performed in

accordance with PETROAMAZONAS EP Specification PAM-EC-50-SP-001 "COATING

SPECIFICATION”.

All flange surfaces and bolt holes, except for flange facings, shall be coated with primer and

intermediate coats prior to assembly. Pipe fittings shall not be primer coated until all shop

fabrication has been completed. Final paint coating shall be performed after piping has been

fully assembled and hydro-tested.

10 THERMAL INSULATION

Piping shall be insulated where indicated on the approved for construction AFC drawings. Insulation

shall be applied as specified in PETROAMAZONAS EP Specification: 43B011-CPT-20-SP-015

“Technical Specification for Thermal Insulation”.





Revision: 1

Page No.: 14 of 196


11 INSULATING GASKETS/KITS

For dissimilar metals connections; examples: a stainless steel flange to carbon steel flange,

or a Cu-Ni flange to carbon steel flange, the potential for galvanic corrosion shall be

determined.

Where potential galvanic corrosion exists, the types of joints are restricted as follows:

For flanged joints of dissimilar metals, insulating gaskets, stud bolt sleeves and washers

such as PIKOTEK, or approved equal, refer to ANNEX No. 3.

For non-flanged mechanical joints of dissimilar metals, a dielectric union.

Welded joints of dissimilar metals are not permitted.

12 IDENTIFICATION OF PIPING AND VALVES

The following nomenclature shall be used when identifying lines and valves designated on the

mechanical flowsheets and process piping drawings.

12.1 Line Identification

Each line on the mechanical flowsheets and process piping drawings shall be clearly

identified to denote the pipe specification and nominal line size.

Example:

3” - FG - 40501 - A - 00 Special (if required)

Piping Specification

Line Number

Service Identification Letters

Nominal Pipe Size





Revision: 1

Page No.: 15 of 196


12.2 Line Service

Each line will be denoted by the following abbreviations:

ABBREVIATION SERVICE CLASSES

AV Atmospheric Vent A, A4,

C Condensate A5

CD Closed Drain A, A5, C2, D

DF Diesel Fuel A

DP Potable Water J

F Foam J, L

FG Fuel Gas (Hot or Dry Service and Wet or Condensate Service)

A4

FW Firewater L

G Gas A4,

GL Gasoline A, A4

GW A, F

HF High Pressure Flare A4, A5

HO Hot Oil A, A4

IA Instrument Air J

JP Jet Fuel A, A4,

LF Low Pressure Flare A4

OD Open Drain A, A5

PF Process Fluids A, A4, A5, C2, D, D5, D6

PG Produced Gas A4

PL Process Liquids (Chemical Injection) BS

PW Produced Water A5, F5

UA Utility Air J

UW Utility Water J

Table 12.1: Services and clases chart





Revision: 1

Page No.: 16 of 196


12.3 Valve Identification System

Each valve on the process & instrumentation diagrams, mechanical flowsheets and piping

drawings will be identified as shown below to denote its valve size, piping specification,

valve type, valve facing and special valve type. Each valve identification shall be die

stamped and/or a stainless steel tag that shall be secured to the valve with a heave gauge

steel wire. Such tags shall remain in place upon completion of fabrication.

4” A 2 R F Special characteristic (Optional, table 12.3)

Valve end connection type (Table 12.2,column 2)

Valve type (Table 12.2, column 1)

Pipe Specification (Table 12.4)

Valve size

12.4 Description

1. Valve Type 2. Connection Type

1 Gate F Flat face

2 Ball G Grayloc

3 Plug J Ring Joint

4 Globe R Raised face

5 Check S Threaded

6 Needle U Union

7 Butterfly W Butt weld

8 Foot X Special

9 Gauge, Multiport Y SW x SCR

0 Choke (900# - 1500#) Z Socket weld (SW)

Table 12.2: Valve tagging

SPECIAL CHARACTERISTIC (Optional)

By type By opening type By characteristic By connection

Lug L Full port F Block and bleed B Standard -

Piston P Regular port - High temperature H FM x FM FM

Short Pattern S Low temperature LT

Slab Gate SG Special X

Wafer W

Table 12.3: Valve tagging - Special characteristics





Revision: 1

Page No.: 17 of 196


12.5 Piping Specification Identification

The following piping specification identification shall used on the fabrication drawings:

PIPING SPEC

ANSI RATING SERVICE IDENTIFICATION C.A. [in]

MATERIAL TYPE

CODE

A ANSI 150 RF Sweet Process Hydrocarbons 1/16” CS ASMEB31.3

A1 ANSI 150 RF Produced Gas (Low Temp to -50 °F) 1/16” CS ASMEB31.3

A2 ANSI 150 RF Corrosive Produced Oil / Water 1/16” CS Int Coated ASMEB31.3

A3 ANSI 150 RF Produced Gas (Low Temp to -50 °F) 0” 304 SS ASMEB31.3

A4 ANSI 150 RF Produced Gas (Corrosive Service) 1/8” CS ASMEB31.3

A5 ANSI 150 RF Corrosive Produced Oil / Water 1/8” CS ASMEB31.3

BS ANSI 150 RF Process Liquids/ Sweet Process Hydrocarbons

0” 304L SS ASMEB31.3

B ANSI 300 RF Sweet Process Hydrocarbons / PG (Hot or Dry Service)

1/16” CS ASMEB31.3

B1 ANSI 300 RF Produced Gas (Low Temp to -50 °F) 1/16” CS ASMEB31.3

B3 ANSI 300 RF Produced Gas (Wet or Condensate Service) 0” 304 SS ASMEB31.3

B4 ANSI 300 RF Produced Gas (Corrosive Service) 1/8” CS ASMEB31.3

B5 ANSI 300 RF Process Hydrocarbons / PG (Hot or Dry Service)

1/8” CS ASMEB31.3

C ANSI 300 RF Corrosive Produced Oil / Water 1/16” CS Int Coated ASMEB31.3

C1 ANSI 300 RF Process Fluid (Flowline) 1/8” CS ASMEB31.4

C2 ANSI 300 RF Corrosive Produced Oil / Water (Production Well Pads and Inlet Plant)

1/16” CS ASMEB31.3

D ANSI 600 RF Sweet Process Hydrocarbons / Produced Gas (Hot or Dry Service)

1/16” CS ASMEB31.3

D1 ANSI 600 RF Corrosive Produced Oil / Water 1/16” CS Int Coated ASMEB31.3

D3 ANSI 600 RF Produced Gas (Wet or Condensate Service) 0” 304 SS ASMEB31.3

D5 ANSI 600 RF Process Fluid (Flowline) 1/8” CS ASMEB31.4

D6 ANSI 600 RF Process Hydrocarbons / Produced Gas (Hot or Dry Service)

1/8” CS ASMEB31.3

E ANSI 900 RTJ Sweet Process Hydrocarbons / Produced Gas (Hot or Dry Service)

1/16” CS ASMEB31.3

E3 ANSI 900 RTJ Produced Gas (Wet or Condensate Service) 0” 304 SS ASMEB31.3

E5 ANSI 900 RTJ Corrosive Produced Oil / Water 1/16” CS Int Coated ASMEB31.3

F ANSI 1500 RTJ Sweet Process Hydrocarbons / Produced Gas (Hot or Dry Service)

0” CS ASMEB31.3

F3 ANSI 1500 RTJ Produced Gas (Wet or Condensate Service) 0” 304 SS ASMEB31.3

F5 ANSI 1500 RTJ Corrosive Produced Oil / Water 1/8” CS ASMEB31.3

G ANSI 1500 RTJ Hot High Pressure Water Injection 0” CS Int Coated ASMEB31.3

H ANSI 2500 RTJ Produced Gas (Hot or Dry Service) 0” CS ASMEB31.3

H3 ANSI 2500 HUB Produced Gas (Wet or Condensate Service) 0” 304 SS ASMEB31.3

H4 ANSI 2500 HUB Produced Gas 0” 304 SS ASMEB31.3

J ANSI 150 RF Instrument Air / Utility Air / Utility Water 0” CS Galv ASMEB31.3

L ANSI 150 FF Firewater 1/16” CS ASMEB31.3

Table 12.4: Piping specification identification chart





Revision: 1

Page No.: 18 of 196


13 BRANCH CONNECTIONS

Couplings shall not be used for branch connections.

"Stub-in" branch connections shall not be permitted.

Branch connection with reinforcement shall not be used.

When branch connections are required in in-service lines, hot tap connections using split-

tees shall be used, split tees requirements are listed in section 13.1 herein.

For new construction of metallic piping selection shall be made in accordance with the

following Branch Connection Chart:

STANDARD BRANCH CONNECTION CHART

[INCHES]

BRANCH

30 24 20 18 16 14 12 10 8 6 4 3 2 1.5 1 0.75 0.5

R U N

30 T RT RT RT RT RT W W W W W W W S S S S

24 T RT RT RT RT RT W W W W W W S S S S

20 T RT RT RT RT RT W W W W W S S S S

18 T RT RT RT RT W W W W W S S S S

16 T RT RT RT RT W W W W S S S S

14 T RT RT RT W W W W S S S S

12 T RT RT RT W W W S S S S

10 T RT RT W W W S S S S

8 T RT RT W W S S S S

6 T RT RT W S S S S

4 T RT RT S S S S

3 T RT S S S S

2 T T/S S S S

1.5 SWT SW RT SW RT SW RT 1 SWT SW RT SW RT

0.75 SWT SW RT

0.5 SWT

LEGEND T Butt Weld Tee

RT Butt Weld Red Tee

S Sockolet (SOL) / Threadolet (TOL)

W Weldolet (WOL)

T/S Straight Tee BW + Concentric Swage

SWT Socket Weld Tee / Threaded Tee

SW RT Socket Weld Reducing Tee / Threaded Reducing Tee





Revision: 1

Page No.: 19 of 196


13.1 Split Tees

If the branch size is fifty percent (50%) or more of the run size, then the calculated

wall thickness, including reinforcement, of the split tee run shall be provided in the

entire cross section of the two halves of the run (except for the recess for the

backing strip).

Flanges used for hot tap or stopple fittings shall meet the requirements ofthe

bolting and seating area of ASME B16.5, ASME B16.47, MSS SP-44.

The wall thickness of split tees of the extruded type shall be designed in

accordance with the requirements of either ASME B31.4/ASME B31.8, paragraph

404.3.1(b)/831.4 or ASME B31.3, paragraph 304.3.3.

When approved by a PAM EP representative, split tees with the branch welded to

the run (instead of extruded) are acceptable, provided that the split tee can

withstand the specified hydrostatic test pressure without permanent deformation.

The wall thickness of split tees with a welded branch shall be designed to provide

integral reinforcement of the branch opening as required by either ASME

B31.3/ASME B31.4/ASME B31.8.

14 SPECIFICATIONS LIST

The following table contains piping, fittings, and valves that shall be used in each piping

specification:





Revision: 1

Page No.: 20 of 196


SPECIFICATION “A”

CLASS: ANSI 150# CS, RF

SERVICE: SWEET PROCESS HYDROCARBONS

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24

PIPE

SCH 160 SCH 80 STD

THD BE, SMLS / ERW-HFI

ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B

FLANGES

150# RF Flange Bore to Match Pipe Wall

THD 150# RF/FF, WN

ASTM-A105

FITTINGS

3000# Wall Thickness to Match Pipe

THD BW, SMLS

ASTM-A105 ASTM-A234 GR WPB

BRANCH (OLETS)

3000# SCH 80 STD

THD BW

ASTM-A105

VA

LV

ES

GATE A1S A1R

BALL A2S, A2SF A2R, A2RF

PLUG N/A

GLOBE A4S A4R

CHECK A5S A5R

NEEDLE A6S, A6SFM N/A

BUTTERFLY N/A A7RL, A7RW

FOOT N/A A8F

GAUGE A9S N/A

BOLTING (Note 3)

Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts

GASKETS

150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – only USA. Carrara Style SWC - only ITALY) 150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder (Flexitallic, Lamons, Garlock - only USA)

PRESS./TEMP. RATINGS

°F PSIG REF. ASME B16.5

NOTES: -20/100 285

1. Maximum design conditions: 400 °F - 200 PSIG (Group 1.1) 200 260

2. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged 250 245

3. For studbolts standard lenghts, see ANNEX No. 6 300 230

4. For ANSI Pipe Schedules, see ANNEX No. 7 400 200

5. For Hot Oil service, 1-1/2” and lower connections shall be socket welded

6. Insulating Kits shall be selected accoding to the maximum operating temperature, see ANNEX No. 3.





Revision: 1

Page No.: 21 of 196



TYPE TAG SIZE DESCRIPTION ACCEPTABLE

BRANDS

GATE

A1S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8,HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

Bonney Forge DHV DSI Newco Smith Velan Vogt

A1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth

A1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.

BALL All Services

A2S

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598

AOP Balon KF MTS Nibco Nutron PBV Quadrant Velan Warren WKM

A2SF

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598

BALL Standard Services

A2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated, Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

AOP Balon Cameron DHV Grove KF MTS Nibco Nutron PBV Quadrant TK Velan WKM

A2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34





Revision: 1

Page No.: 22 of 196




BRANDS

BALL

Standard Services

A2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


A2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

BALL

HO PF Services

A2R 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34


6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

A2RF 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34


6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D





Revision: 1

Page No.: 23 of 196




BRANDS

14” and Larger Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE A4S 1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


A4R 2” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DSI MTS Newco Powell Velan Walworth

CHECK A5S

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats,threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

AOP

Balon Bonney Forge DHV DSI KF Eagle Newco Tom Wheatley Velan Vogt Wheatley

CHECK A5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598

AOP Balon Bonney Forge Crane DHV DSI KF Eagle MTS Newco PBV Tom Wheatley Velan Walworth Wheatley

A5R 4” and Larger Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598





Revision: 1

Page No.: 24 of 196




BRANDS

NEEDLE A6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

AGCO Balon KF NOSHOK Swagelok

A6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

BUTTER-FLY

A7RL 3” and Larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598

Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant Velan

A7RW 3” and Larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598

FULL FLOW FOOT

A8F 2” and Larger Class 125#, Cast Iron body (ASTM-A126 Gr B), FF flanged ends, bronze internals, SS strainer

APCO Flomatic Valmatic

GAUGE A9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug

AGCO AOP HEX Swagelok





Revision: 1

Page No.: 25 of 196


SPECIFICATION “A1”

CLASS: ANSI 150 CS, RF

SERVICE: PRODUCED GAS (LOW TEMP TO -50 °F)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24

PIPE

SCH 160 SCH 80 STD

THD, SMLS BE, SMLS

ASTM-A333 GR 6 (Note 2)

FLANGES


THD 150# RF, WN

ASTM-A350 GR LF2

FITTINGS


THD BW, SMLS

ASTM-A350 GR LF2 ASTM-A420 GR WPL6

BRANCH (OLETS)

3000# SCH 80 STD

THD BW

ASTM-A350 GR LF2

VA

LV

ES

GATE A1-1SLT A1-1RLT

BALL A1-2SLT

A1-2SFLT A1-2RLT, A1-2RFLT

PLUG N/A

GLOBE A1-4SLT A1-4RLT

CHECK N/A A1-5RLT

A1-5RPLT A1-5RLT, A1-5RPLT

A1-5RWLT A1-5RLT, A1-5RWLT

NEEDLE A1-6SLT N/A

BUTTERFLY N/A A1-7RLLT, A1-7RWLT

GAUGE A1-9SLT N/A

BOLTING (Note 3)

Bolts: ASTM-A320 GR L7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 4, Fluorocarbon Coated Heavy Hex Nuts

GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – only USA. Carrara Style SWC - only ITALY)



NOTES: -50/100 285


2. MTRs and CTRs for low temperature material and certification tests are required per ASME B31.3

250 245

3. For studbolts standard lenghts, see ANNEX No. 6

4. For ANSI Pipe Schedules, see ANNEX No. 7





Revision: 1

Page No.: 26 of 196




BRANDS

GATE

A1-1SLT

¾” and Smaller Class 800# (1975# CWP), FS body (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, grafoil packing, threaded ends per ASME B1.20.1, bolted body construction, OS&Y, solid wedge. Hand wheel operated. Design per API 602. Test per API 598


A1-1RLT

1” – 4” Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth A1-1RLT

6” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Gear operated. Design per API 600. Test per API 598.

BALL A1-2SLT

¾” and Smaller 1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, reduced port. Fire safe per API 607. Design per API 608. Test per API 598

AOP Balon KF MTS Nibco Nutron PBV Velan Warren WKM

A1-2SFLT

¾” and Smaller 1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, full port. Fire safe per API 607. Design per API 608. Test per API 598

A1-2RLT

1” - 6” Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34






Revision: 1

Page No.: 27 of 196




BRANDS

BALL A1-2RFLT

1” - 6” Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34

AOP Balon Cameron DHV Grove KF MTS Nibco Nutron PBV Quadrant TK Velan

WKM

BALL A1-2RLT

8” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D


A1-2RFLT

8” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

GLOBE A1-4SLT 1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


A1-4RLT 2” and 8” Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1

Page No.: 28 of 196




BRANDS

CHECK A1-5RLT 1” - 3” Class 150#, CS body (ASTM-A352 Gr LCC) , Trim 12, HF Stellite® seats, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Design per API 594. Test per API 598


A1-5RLT 4” and Larger Class 150#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Body drain ½” NPT. Design per API 594. Test per API 598

CHECK A1-5RPLT 1” - 1 ½” Class 150#, FS body (ASTM-350 Gr LF2), 316 SS piston and spring, integral 13% chrome to hard faced seat, RF flanged ends per ASME B16.5, threaded or bolted bonnet. Test per API 598

Bonney Forge DSI Smith Vogt

A1-5RPLT 2” - 8” Class 150#, CS body (ASTM-A352 Gr LCC), 316 SS piston and spring, soft seals, RF flanged ends per ASME B16.5, bolted bonnet. Fire safe bonnet. Test per API 598

KF Eagle Norriseal Tom Wheatley

A1-5RWLT 2” - 24” Class 150#, CS body and cover (ASTM-A352 Gr LCC), 316 SS disc and springs, soft seat, wafer body design or full threaded lugged body. Test per API 598

Crane KF Eagle Tom Wheatley Wheatley

NEEDLE A1-6SLT 1” and Smaller 6000# CWP, bar stock body (316 SS), Teflon packing, soft or hard seat material, low temperature “arctic” lube, M x FM threaded ends per ASME B1.20.1. Design MSS SP-105


BUTTER-FLY

A1-7RLLT 3” and Larger Class 150#, high performance type, low

temp CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598

Keystone Posi-Seal Velan

WKM

BUTTER-FLY

A1-7RWLT 3” and Larger Class 150#, high performance type, low

temp CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598

Keystone Posi-Seal Velan WKM





Revision: 1

Page No.: 29 of 196




BRANDS

GAUGE A1-9SLT

3/4” and Smaller

6000# CWP, bar stock body (316 SS), Teflon packing, delrin seat material, low temperature “arctic” lube, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug






Revision: 1

Page No.: 30 of 196




SERVICE: CORROSIVE PRODUCED OIL / WATER

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24

PIPE

SCH 160 SCH 80 STD

THD BE, SMLS / ERW-HFI

ASTM-A106 GR B, GALV

ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)

FLANGES


THRD 150# RF, WN

ASTM-A105, GALV ASTM-A105, Internally Coated (Note 5)

FITTINGS


THD BW, SMLS

ASTM-A105, GALV ASTM-A234 GR WPB, Internally Coated (Note 5)

BRANCH (OLETS)

3000# SCH 80 STD

THRD BW

ASTM-A105

VA

LV

ES

(N

ote

6)

GATE A2-1S A2-1R

BALL A2-2S, A2-2SF A2-2R, A2-2RF

PLUG N/A

GLOBE A2-4S A2-4R

CHECK A2-5S A2-5R

NEEDLE A2-6S, A2-

6SFM N/A

BUTTERFLY N/A

GAUGE A2-9S N/A

BOLTING (Note 7)

Bolts: ASTM-A193 GR B7 Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 2H Fluorocarbon Coated Heavy Hex Nuts

GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – only USA. Carrara Style SWC - only ITALY)



NOTES: -20/100 285


2. This specification will be used Only for replacement in existing systems 250 245

3. Piping 1 ½” or smaller subject to vibration or pulsation shall be SW or flanged

4. Flanges shall be used in lieu of unions

5. The internal coating for Pipe, Flanges and Fittings shall be Plasite 7159

6. Valves for corrosive applications should be supplied with the appropriate internal valve coating and trim, and it could be Plasite 7159 or Enduro Bond



9. For Internal Coating Specifications, see ANNEX No. 8





Revision: 1

Page No.: 31 of 196




BRANDS

GATE

A2-1S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


A2-1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598


A2-1R 6” and Larger

Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598.

BALL A2-2S

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598

AOP Balon KF MTS Nibco Nutron PBV Quadrant Warren Velan WKM

A2-2SF

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598

A2-2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

AOP Balon DHV Cameron Grove KF MTS Nibco Nutron PBV Quadrant TK Velan WKM

A2-2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34





Revision: 1

Page No.: 32 of 196




BRANDS

BALL A2-2R 8” and Larger

Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


A2-2RF 8” and Larger

Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE A2-4S

1 ½” and Smaller




Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK A2-5S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598

AOP Bonney Forge Crane DHV DSI KF Eagle Newco Powell Velan Vogt Walworth





Revision: 1

Page No.: 33 of 196




BRANDS

CHECK A2-5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598

AOP Balon Bonney Forge Crane DHV DSI KF Eagle MTS Newco PBV Tom Wheatley Velan Vogt Wheatley


Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE A2-6S 1” and Smaller

6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


A2-6SFM 1” and Smaller

6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE A2-9S ¾” and Smaller

6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug






Revision: 1

Page No.: 34 of 196



CLASS: ANSI 150# SS, RF


SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24

PIPE

SCH 80S SCH 40S

THD (Note 3)/PE, SMLS BE, SMLS

ASTM-A312 TP 304

FLANGES


SW 150# RF, WN

ASTM-A182 F 304

FITTINGS


SW BW, SMLS

ASTM-A182 F 304 ASTM-A403 WP 304

BRANCH (OLETS)

3000# SCH 40S

SW BW

ASTM-A182 F 304

VA

LV

ES

GATE A3-1S A3-1R

BALL A3-2R, A3-2RF

PLUG N/A

GLOBE N/A A3-4R N/A

CHECK N/A A3-5R, A3-5RP, A3-5RW A3-5R, A3-5RW

NEEDLE A3-6S N/A

BUTTERFLY N/A A3-7RL, A3-7RW

GAUGE A3-9S N/A

BOLTING (Note 4)

Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts

GASKETS

150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)

PRESS./TEMP. RATINGS °F PSIG REF. ASME B16.5

NOTES: -50 /-100 275


2. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material 3. Threaded valves are allowed on instruments, vents and drains

250 217

4. Use pipe threaded only for valves connections







Revision: 1

Page No.: 35 of 196




BRANDS

GATE

A3-1S

1 ½” and Smaller

Class 800#, SS body (ASTM-A182 F316), Trim 12, HF Stellite® seats, graphite packing, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge. Hand wheel operated. Design per API 602. Test per API 598. -50 ºF design


A3-1R

2” – 4” Class 150#, 316 SS body, Trim 12, HF Stellite® seats, graphite packing, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge. Hand wheel operated. Design per API 600. Test per API 598. -50 ºF design


A3-1R

6” and Larger Class 150#, 316 SS body, Trim 12, HF Stellite® seats, graphite packing, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge. Gear operated. Design per API 600. Test per API 598. -50 ºF design.

BALL A3-2R

½” - 6” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598. -50 ºF design

AOP Cameron DHV Flow-tek Grove KF MTS Nibco Nutron PBV Quadrant TK Velan WKM

A3-2RF

½” – 6” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever or gear (6”) operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598. -50 ºF design

A3-2R

8” - 10” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design

A3-2RF

8” - 10” Class 150#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design





Revision: 1

Page No.: 36 of 196




BRANDS

BALL A3-2R 12” - 24” Class 150#, 316 SS body and ball, SS 17-4 PH stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design


A3-2RF 12” - 24” Class 150#, 316 SS body and ball, SS 17-4 PH stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D. -50 ºF design

GLOBE A3-4R 2” - 8” Class 150#, 316 SS body, Trim 12, HF Stellite® seats, graphite packing, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598. -50 ºF design


CHECK A3-5R 2” – 3” Class 150#, 316 SS body, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, bolted cap, swing check, horizontal or vertical service. Design per API 594. Test per API 598. -50 ºF design

AOP Bonney Forge Crane DHV DSI KF Eagle MTS Newco PBV Tom Wheatley Velan Walworth Wheatley

A3-5R 4” and Larger Class 150#, 316 SS body, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, bolted cap, swing check, horizontal or vertical service. Body drain ½” NPT. Design per API 594. Test per API 598. -50 ºF design

A3-5RP 2” - 8” Class 150#, 316 SS body, piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598. -50 ºF design


A3-5RW 2” and Larger Class 150#, 316 SS body and plate, disc and spring, soft seat, wafer body design or full threaded lugged body. Test per API 598. -50 ºF design






Revision: 1

Page No.: 37 of 196




BRANDS


6000# CWP, bar stock body (316 SS), Teflon packing, soft or hard seat material, low temperature “arctic” lube, M x FM threaded ends per ASME B1.20.1. Design MSS SP-105


BUTTER-FLY

A3-7RL

3” and Larger

Class 150#, 316 SS body and disc, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598. -50 ºF design

Bray Center Line Demco Flowseal Keystone KF Norris Quadrant Velan

A3-7RW

3” and Larger

Class 150#, 316 SS body and disc, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598. -50 ºF design

GAUGE A3-9S 3/4” and Smaller







Revision: 1

Page No.: 38 of 196




SERVICE: PRODUCED GAS (CORROSIVE SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24

PIPE

SCH 160 SCH 80 STD

THD/PE BE, SMLS / ERW-HFI


FLANGES


THD/SW 150# RF/FF, WN

ASTM-A105

FITTINGS


THD/SW BW, SMLS


BRANCH (OLETS)

3000# SCH 80 STD

THD/SW BW

ASTM-A105

VA

LV

ES

GATE A4-1S, A4-1Z, A4-1R A4-1R

BALL A4-2S, A4-2SF, A4-2Z

A4-2ZF, A4-2R, A4-2RF A4-2R, A4-2RF

PLUG N/A

GLOBE A4-4S, A4-4Z, A4-4R A4-4R

CHECK A4-5S, A4-5Z, A4-5R A4-5R

NEEDLE A4-6S, A4-6SFM N/A


FOOT N/A

GAUGE A4-9S N/A

BOLTING (Note 5)


GASKETS

150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer & inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY) 150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder (Flexitallic, Lamons, Garlock - USA ONLY)



NOTES: -20/100 285


2. Threaded fittings and valves are allowed on instruments, vents and drains 250 245

3. Corrosion Allowance = 1/8”

4. Valves elastomers in contact with process fluids shall be suitable for exposure to wet Carbon Dioxide.







Revision: 1

Page No.: 39 of 196




BRANDS

GATE

A4-1S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), threaded ends per ASME B1.20.1, OS&Y, Trim 8, bolted bonnet, solid wedge gate, HF Stellite® seats. Hand wheel operated. WT per API 602. Test per API 598.


A4-1Z 1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), socket weld ends per ASME B16.11, OS&Y, Trim 8, bolted bonnet, solid wedge gate, and HF Stellite® seats. Hand wheel operated. WT per API 602. Test per API 598

A4-1R 1 ½” and Smaller

Class 150#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 602. Test per API 598

A4-1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


A4-1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.

BALL A4-2S

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598


A4-2Z

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598





Revision: 1

Page No.: 40 of 196




BRANDS

BALL All Services

A4-2SF 1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598


A4-2ZF

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598


Class 150#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598

AOP KF MTS Nibco Nutron PBV Quadrant WKM

A4-2RF 1 ½” and Smaller

Class 150#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598


A4-2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598, or ASME 16.34


A4-2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34





Revision: 1

Page No.: 41 of 196




BRANDS


A4-2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


A4-2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

BALL HO PF Services

A4-2R 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34


6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

A4-2RF 2” – 4” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever operated, floating ball, fire safe. Design per API 608. Test per API 598 or ASME 16.34

AOP Balon Cameron DHV Grove KF





Revision: 1

Page No.: 42 of 196




BRANDS

6” – 12” Class 150#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

MTS Nibco Nutron PBV Quadrant TK Velan WKM

14” and Larger

Class 150#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE A4-4S

1 ½” and Smaller



A4-4Z

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


Class 150#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598

Bonney Forge DSI Newco Smith Velan Vogt

A4-4R 2” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1

Page No.: 43 of 196




BRANDS

CHECK A4-5S

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

AOP Balon Bonney Forge DHV DSI KF Eagle Newco Tom Wheatley Velan Vogt

A4-5Z

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598


Class 150#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 602. Test per API 598

A4-5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


A4-5R 4” and Larger Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE A4-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


A4-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105





Revision: 1

Page No.: 44 of 196




BRANDS

BUTTER-FLY

A4-7RL 3” and larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598

Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant

A4-7RW 3” and larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598








Revision: 1

Page No.: 45 of 196





SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24 30

PIPE

SCH 160 SCH 80 XS SCH 40 SCH 20

THD BE, SMLS/ ERW-HFI


ASTM-A106 GR B, API-5L GR B

FLANGES


THRD 150# RF, WN

ASTM-A105, GALV ASTM-A105

FITTINGS

3000# FS Wall Thickness to Match Pipe

THRD BW, SMLS

ASTM-A105, GALV ASTM-A234 GR WPB

BRANCH (OLETS)

3000# SCH 80 XS SCH 40

THRD BW

ASTM-A105

VA

LV

ES

GATE A5-1S A5-1R

BALL A5-2S, A5-2SF A5-2R, A5-2RF

PLUG N/A

GLOBE A5-4S A5-4R

CHECK A5-5S A5-5R

NEEDLE A5-6S, A5-

6SFM N/A


GAUGE A5-9S N/A

BOLTING (Note 4)


GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)



NOTES: -

20/100 285

1. Maximum design conditions: 250 °F - 245 PSIG 200 260

2. This specification will be used Only for new systems





1





Revision: 1

Page No.: 46 of 196




BRANDS

GATE

A5-1S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


A5-1R 2” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 12. , HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


A5-1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 12. , HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.

BALL A5-2S

1 ½” and Smaller


AOP Balon KF MTS Nibco Nutron PBV Quadrant Warren Velan WKM

A5-2SF

1 ½” and Smaller


A5-2R 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


A5-2RF 2” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34





Revision: 1

Page No.: 47 of 196




BRANDS

BALL A5-2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


A5-2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE A5-4S

1 ½” and Smaller

Class 800#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


A5-4R 2” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK A5-5S

1 ½” and Smaller

Class 800#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598

AOP Bonney Forge Crane DHV DSI KF Eagle Newco Powell Velan Vogt Walworth





Revision: 1

Page No.: 48 of 196




BRANDS

CHECK A5-5R 2” - 3” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598



Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598




A5-6SFM 1” and Smaller


BUTTER-FLY

A5-7RL 3” and larger Class 150#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598

Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant A5-7RW 3” and larger Class 150#, CS body (ASTM-A216 Gr

WCB), SS stem and disc, 17-4 PH shaft, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598




1





Revision: 1

Page No.: 49 of 196


SPECIFICATION “BS”


SERVICE: PROCESS LIQUIDS / SWEET PROCESS HYDROCARBONS

SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24

PIPE

SCH 40S SCH 10S


ASTM-A312 TP 304L

FLANGES


SW 150# RF, WN

ASTM-A182 F 304L

FITTINGS


SW BW, SMLS

ASTM-A182 F 304L ASTM-A403 WP 304L

BRANCH (OLETS)

3000# SCH 10S

SW BW

ASTM-A182 F 304L

VA

LV

ES

GATE BS-1S, BS-1Z BS-1R

BALL BS-2S, BS-2SF BS-2Z, BS-2ZF

BS-2R, BS-2RF

PLUG N/A

GLOBE BS-4S, BS-4Z BS-4R

CHECK BS-5S, BS-5Z BS-5R

NEEDLE BS-6S N/A

BUTTERFLY N/A BS-7RL, BS-7RW

GAUGE BS-9S N/A

BOLTING (Note 4)

Bolts: ASTM-A193 GR B8 Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 8 Heavy Hex Nuts

GASKETS 150# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)


°F PSIG REF. ASME

B16.5

NOTES -20/100 230


2. Wall thicknesses are based on allowable stresses per ASME B31.3 for 316 SS material 250 185








Revision: 1

Page No.: 50 of 196




BRANDS

GATE

BS-1S

1 ½” and Smaller

Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


BS-1Z

1 ½” and Smaller

Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

BS-1R 2” - 4” Class 150#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598


BS-1R 6” and Larger Class 150#, 316 SS body and bonnet, Trim 12, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598.

BALL BS-2S

1 ½” and Smaller

1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598

AOP Balon Flow-tek KF MTS Nibco Nutron PBV Quadrant Velan Warren WKM

BS-2Z

1 ½” and Smaller

1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598

BS-2SF

1 ½” and Smaller

1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598





Revision: 1

Page No.: 51 of 196




BRANDS

BALL BS-2ZF

1 ½” and Smaller

1440 PSI @ 100 F, SS body (ASTM-A351 Gr CF8M or ASTM-A182 F316), 316 SS ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, full port, lever operated. Fire safe. Design per API 608. Test per API 598

AOP Flow-tek KF MTS Nibco Nutron PBV Quadrant Velan Warren WKM

BS-2R 2” – 6” Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

AOP Cameron DHV Grove KF MTS Nibco Nutron PBV Quadrant TK Velan WKM

BS-2RF 2” – 6” Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

BS-2R 8” and Larger Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

BS-2RF 8” and Larger Class 150#, 316 SS body, ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D





Revision: 1

Page No.: 52 of 196




BRANDS

GLOBE

BS-4S

1 ½” and Smaller

Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


BS-4Z

1 ½” and Smaller

Class 800# (1975# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598

BS-4R 2” and Larger Class 150#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK BS-5S

1 ½” and Smaller

Class 800# (1975# CWP), SS body and cover (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598

AOP Bonney Forge DHV DSI KF Eagle Newco Tom Wheatley Velan Vogt Wheatley

BS-5Z

1 ½” and Smaller

Class 800# (1975# CWP), SS body and cover (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, socket ends per ASME B16.11, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598

BS-5R 2” - 3” Class 150#, 316 SS body and cover, Trim 12, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


BS-5R 4” and Larger Class 150#, 316 SS body and cover, Trim 12, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598





Revision: 1

Page No.: 53 of 196




BRANDS

NEEDLE BS-6S 1” and Smaller



BUTTER-FLY

BS-7RL 3” and Larger Class 150#, 316 SS body, stem and disc, Viton seat, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Test per API 598

Bray Center Line Demco Flowseal Keystone KF MTS Norris Quadrant

BS-7RW 3” and Larger Class 150#, 316 SS body, stem and disc, Viton seat, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Test per API 598

GAUGE BS-9S ¾” and Smaller







Revision: 1

Page No.: 54 of 196


SPECIFICATION “B”


SERVICE: SWEET PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24

PIPE

SCH 160 SCH 80 STD SCH 40 SCH 30 SCH 40

THD/PE BE, SMLS/ ERW-HFI


FLANGES


THD/SW 300# RF, WN

ASTM-A105

FITTINGS


THD/SW BW, SMLS


BRANCH (OLETS)

3000# SCH 80 STD SCH 40 SCH 30 SCH 40

THD/SW BW

ASTM-A105

VA

LV

ES

GATE B1S, B1Z B1R

BALL B2S, B2SF B2Z, B2ZF

B2R, B2RF

PLUG N/A

GLOBE B4S, B4Z B4R

CHECK B5S, B5Z B5R

NEEDLE B6S, B6SFM N/A

BUTTERFLY N/A B7RL, B7RW

GAUGE B9S N/A

BOLTING (Note 3)





NOTES: -20/100 740









Revision: 1

Page No.: 55 of 196




BRANDS

GATE

B1S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


B1Z 1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socked weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

B1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


B1R 6” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.

BALL B2S

1 ½” and Smaller



B2Z

1 ½” and Smaller


B2SF

1 ½” and Smaller






Revision: 1

Page No.: 56 of 196




BRANDS

BALL

B2ZF

1 ½” and Smaller



B2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


B2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608.Test per API 598 or ASME 16.34

B2R 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

B2RF 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE B4S

1 ½” and Smaller







Revision: 1

Page No.: 57 of 196




BRANDS

GLOBE B4Z

1 ½” and Smaller



B4R 2” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK B5S

1 ½” and Smaller


AOP Balon Bonney Forge DHV DSI KF Eagle Newco Tom Wheatley Velan Vogt Wheatley

B5Z

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats ,socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

B5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


B5R 4” and Larger Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598





Revision: 1

Page No.: 58 of 196




BRANDS

NEEDLE B6S 1” and Smaller



B6SFM 1” and Smaller


BUTTER-FLY

B7RL 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598


B7RW 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598

GAUGE B9S ¾” and Smaller


AGCO HEX Swagelok





Revision: 1

Page No.: 59 of 196


SPECIFICATION “B1”



SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 20 24

PIPE

SCH 160 SCH 80 STD XH SCH 40

THD/PE, SMLS BE, SMLS

ASTM-A333 GR 6 (Note 2)

FLANGES


THD/SW 300# RF, WN

ASTM-A350 GR LF2

FITTINGS


SW/THD BW, SMLS

ASTM-A350 GR LF2 ASTM-A420 GR WPL6

BRANCH (OLETS)

3000# SCH 80 STD XH SCH 40

THD/SW BW

ASTM-A350 GR LF2

VA

LV

ES

GATE B1-1SLT B1-1RLT

BALL B1-2SLT

B1-2SFLT B1-2RLT, B1-2RFLT

PLUG N/A

GLOBE B1-4SLT B1-4RLT

CHECK N/A B1-5RLT

B1-5RPLT B1-5RLT, B1-5RPLT

B1-5RWLT B1-5RLT, B1-5RWLT

NEEDLE B1-6SLT N/A

BUTTERFLY N/A B1-7RLLT, B1-7RWLT

GAUGE B1-9SLT N/A

BOLTING (Note 3)

Bolts: ASTM-A320 GR L7, Fluorocarbon Coated Thread and dimensions per ASME B16.5 Nuts: ASTM-A194 GR 4, Fluorocarbon Coated Heavy Hex Nuts




NOTES: -50/100 740


2. MTRs and CTRs for low temperature material and certification tests are required per ASME B31.3

250 667







Revision: 1

Page No.: 60 of 196




BRANDS

GATE

B1-1SLT

¾” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, grafoil packing, threaded ends per ASME B1.20.1, bolted body construction, OS&Y, solid wedge. Hand wheel operated. Design per API 602. Test per API 598


B1-1RLT

1” – 4” Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Hand wheel operated. Design per API 600. Test per API 598


B1-1RLT

6” and Larger

Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y, solid or flexible (2” and larger) wedge disc. Gear operated. Design per API 600. Test per API 598.

BALL B1-2SLT

¾” and Smaller

1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, reduced port. Fire safe per API 607. Design per API 608. Test per API 598

AOP Balon DHV KF MTS Nibco Nutron PBV Velan Warren WKM

B1-2SFLT

¾” and Smaller

1480 PSI @ 100 F, FS body (ASTM-A350 Gr LF2), 316 SS ball and stem, filled TFE seats, threaded ends per ASME B1.20.1, lever operated, full port. Fire safe per API 607. Design per API 608. Test per API 598

B1-2RLT

1” - 3” Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34


B1-2RFLT

1” - 3” Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball and stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34





Revision: 1

Page No.: 61 of 196




BRANDS

BALL B1-2RLT

4” and Larger

Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP ball, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

AOP Balon Cameron DHV Grove KF MTS Nibco Nutron PBV Quadrant TK WKM

B1-2RFLT

4” and Larger

Class 300#, CS body (ASTM-A352 Gr LCC), CS 1 mil ENP, SS 17-4 PH stem, fire safe seat, RF flanged ends per ASME B16.5, top or end entry construction, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

GLOBE B1-4SLT 1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A350 Gr LF2), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


B1-4RLT 2” and Larger

Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, HF Stellite® seats, grafoil packing, RF flanged ends per ASME B16.5, bolted bonnet, OS&Y. Hand wheel operated. Design per API 600. Test per API 598


CHECK B1-5RLT 1” - 3” Class 300#, CS body (ASTM-A352 Gr LCC) , Trim 12, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Design per API 594. Test per API 598


B1-5RLT 4” and Larger

Class 300#, CS body (ASTM-A352 Gr LCC), Trim 12, hard or soft seals, RF flanged ends per ASME B16.5, swing check, bolted bonnet, horizontal or vertical service. Fire safe bonnet. Body drain ½” NPT. Design per API 594. Test per API 598





Revision: 1

Page No.: 62 of 196




BRANDS

CHECK B1-5RPLT

1” - 1 ½” Class 300#, FS body (ASTM-350 Gr LF2), 316 SS piston and spring, integral 13% chrome to hard faced seat, RF flanged ends per ASME B16.5, threaded or bolted bonnet. Test per API 598

Bonney Forge DHV DSI Smith Vogt

B1-5RPLT

2” - 8” Class 300#, CS body (ASTM-A352 Gr LCC), 316 SS piston and spring, soft seals, RF flanged ends per ASME B16.5, bolted bonnet. Fire safe bonnet. Test per API 598

DHV KF Eagle Norriseal Tom Wheatley

B1-5RWLT

2” - 24” Class 300#, CS body and cover (ASTM-A352 Gr LCC), 316 SS disc and springs, soft seat, wafer body design or full threaded lugged body. Test per API 598


NEEDLE B1-6SLT 1” and Smaller

6000# CWP, bar stock body (316 SS), Teflon packing, soft or hard seat material, low temperature “arctic” lube, M x FM threaded ends per ASME B1.20.1. Design MSS SP-105


BUTTER-FLY B1-7RLLT

3” and Larger

Class 300#, high performance type, low temp

CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, lug to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598

Keystone Posi-Seal Velan WKM

B1-7RWLT

3” and Larger

Class 300#, high performance type, low temp

CS body (-50 F design), 316 SS disc, 17-4 PH shaft, reinforced Teflon seal, graphite packing, wafer to mate with RF flanges. Hand wheel or gear (6” and larger) operated. Design per API 609. Fire safe. Test per API 598

GAUGE B1-9SLT

3/4” and Smaller


AGCO HEX Swagelok





Revision: 1

Page No.: 63 of 196




SERVICE: PRODUCED GAS (WET OR CONDENSATE SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10

PIPE

SCH 80S SCH 40S


ASTM-A312 TP 304

FLANGES


SW 300# RF, WN

ASTM-A182 F 304

FITTINGS


SW BW, SMLS


BRANCH (OLETS)

3000# SCH 40S

SW BW

ASTM-A182 F 304

VA

LV

ES

GATE B3-1S, B3-1Z B3-1R

BALL B3-2R, B3-2RF

PLUG N/A

GLOBE B3-4R

CHECK N/A B3-5R, B3-5RP

NEEDLE B3-6S, B3-6SFM N/A

BUTTERFLY N/A

GAUGE B3-9S N/A

BOLTING (Note 5)

Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions

per ASME B16.5 Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts

GASKETS 300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY)


NOTES: -20/100 720


2. Valve elastomers in contact with process fluids shall be suitable for exposure to Hydrogen Sulfide, Carbon Dioxide and Aromatics

250 570

3. Wall thicknesses are based on allowable stresses per ASME B31.3 for 304 SS material


5. For Bolts dimensions see, ANNEX No. 6






Revision: 1

Page No.: 64 of 196




BRANDS

GATE

B3-1S

1 ½” and Smaller



B3-1Z

1 ½” and Smaller


B3-1R 2” - 4” Class 300#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598


B3-1R 6” and Larger Class 300#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598.

BALL B3-2R

½” - 3” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34


B3-2RF ½” - 3” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever operated. Floating ball. Fire safe per API 607. Design per API 608. Test per API 598 or ASME 16.34





Revision: 1

Page No.: 65 of 196




BRANDS

BALL B3-2R

4” - 10” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D


B3-2RF 4” - 10” Class 300#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

GLOBE B3-4R

½” - 10” Class 300#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600/602. Test per API 598


CHECK B3-5R 2” - 3” Class 300#, 316 SS body and cover, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


B3-5R 4” and Larger Class 300#, 316 SS body, and cover, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

B3-5RP 2” - 10” Class 300#, 316 SS body, piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598






Revision: 1

Page No.: 66 of 196




BRANDS

NEEDLE B3-6S 1” and Smaller

2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


B3-6SFM 1” and Smaller

2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE B3-9S ¾” and Smaller

4000 PSI @ 500 F, bar stock body (316 SS), Teflon packing, metal seat, one male and three female, needle port. Complete with bleeder valve and 316 SS plug

AGCO HEX Swagelok





Revision: 1

Page No.: 67 of 196




SERVICE: PRODUCED GAS (CORROSIVE SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 18 20 24

PIPE

SCH XXS SCH 160 SCH 80 SCH 40 XS SCH 40



FLANGES


THD/SW 300# RF, WN

ASTM-A105

FITTINGS


THD/SW BW, SMLS


BRANCH (OLETS)

3000# SCH 80 SCH 40 XS SCH 40

THD/SW BW

ASTM-A105

VA

LV

ES

GATE B4-1S, B4-1Z, B4-1R B4-1R

BALL B4-2S, B4-2SF, B4-2Z

B4-2ZF, B4-2R, B4-2RF B4-2R, B4-2RF

PLUG N/A

GLOBE B4-4S, B4-4Z, B4-4R B4-4R

CHECK B4-5S, B4-5Z, B4-5R B4-5R, B4-5RP

NEEDLE B4-6S, B4-

6SFM N/A

BUTTERFLY N/A B4-7RL, B4-7RW

GAUGE B4-9S N/A

BOLTING (Note 5)


GASKETS 300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY)



NOTES: -20/100 740


2. Threaded fittings and valves are allowed on instruments, vents and drains 250 667


4. Valves elastomers in contact with process fluids shall be suitable for exposure to wet Carbon Dioxide.







Revision: 1

Page No.: 68 of 196




BRANDS

GATE

B4-1S

1 ½” and Smaller



B4-1Z 1 ½” and Smaller


B4-1R 1 ½” and Smaller

Class 300#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats , RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 602. Test per API 598

B4-1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


B4-1R 6” and Larger

Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598

BALL B4-2S

1 ½” and Smaller



B4-2Z

1 ½” and Smaller






Revision: 1

Page No.: 69 of 196




BRANDS

BALL B4-2SF

1 ½” and Smaller



B4-2ZF

1 ½” and Smaller



Class 300#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598

AOP KF MTS Nibco Nutron PBV Quadrant Velan WKM

B4-2RF 1 ½” and Smaller

Class 300#, FS body (ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598

B4-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


B4-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D






Revision: 1

Page No.: 70 of 196




BRANDS

BALL B4-2RF 4” and Larger

Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


GLOBE

B4-4S

1 ½” and Smaller


Bonney Forge DHV DSI Newco Smith Velan Vogt B4-4Z

1 ½” and Smaller



Class 300#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598



Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1

Page No.: 71 of 196




BRANDS

CHECK

B4-5S

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8 HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598


B4-5Z

1 ½” and Smaller



Class 300#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 602. Test per API 598

B4-5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598

AOP Balon Bonney Forge DHV Crane DSI KF Eagle MTS Newco PBV Tom Wheatley Velan Walworth Wheatley


Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

B4-5RP 2” - 10” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), 316 SS piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598











Revision: 1

Page No.: 72 of 196




BRANDS

BUTTER-

FLY

B4-7RL 3” and Larger

Class 300#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598


B4-7RW 3” and Larger

Class 300#, CS body (ASTM-A216 Gr WCB), SS stem and disc, 17-4 PH shaft, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598



AGCO HEX Swagelok





Revision: 1

Page No.: 73 of 196




SERVICE: PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24

PIPE

SCH XXS SCH 160 SCH 80 STD SCH 40



FLANGES


THD/SW 300# RF, WN

ASTM-A105

FITTINGS


THD/SW BW, SMLS


BRANCH (OLETS)

3000# SCH 80 STD SCH 40

THD/SW BW

ASTM-A105

VA

LV

ES

GATE B5-1S, B5-1Z B5-1R

BALL B5-2S, B5-2SF B5-2Z, B5-2ZF

B5-2R, B5-2RF

PLUG N/A

GLOBE B5-4S, B5-4Z B5-4R

CHECK B5-5S, B5-5Z B5-5R

NEEDLE B5-6S,

B5-6SFM N/A

BUTTERFLY N/A B5-7RL, B5-7RW

GAUGE B5-9S N/A

BOLTING (Note 3)



PRESS./TEMP. RATINGS °F

PSIG REF. ASME B16.5

NOTES: -20/100 740










Revision: 1

Page No.: 74 of 196




BRANDS

GATE

B5-1S

1 ½” and Smaller



B5-1Z 1 ½” and Smaller


B5-1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


B5-1R 6” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598.

BALL B5-2S

1 ½” and Smaller



B5-2Z

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A-105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598

B5-2SF

1 ½” and Smaller






Revision: 1

Page No.: 75 of 196




BRANDS

BALL

B5-2ZF

1 ½” and Smaller



B5-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


B5-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608.Test per API 598 or ASME 16.34

B5-2R 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

B5-2RF 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE B5-4S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105),Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598






Revision: 1

Page No.: 76 of 196




BRANDS

GLOBE B5-4Z

1 ½” and Smaller



B5-4R 2” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK B5-5S

1 ½” and Smaller



B5-5Z

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats ,socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

B5-5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


B5-5R 4” and Larger Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598





Revision: 1

Page No.: 77 of 196




BRANDS






BUTTER-FLY

B5-7RL 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598


B5-7RW 3” and Larger Class 300#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598



AGCO HEX Swagelok





Revision: 1

Page No.: 78 of 196


SPECIFICATION “C”



SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24

PIPE

SCH 160 SCH 80 STD SCH 40 SCH 30

THD BE, SMLS/ERW-HFI


ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)

FLANGES


THRD 300# RF, WN


FITTINGS


THRD BW, SMLS


BRANCH (OLETS)

3000# SCH 80 STD SCH 40 SCH 30

THRD BW

ASTM-A105 ASTM-A105, Internally Coated (Note 5)

VA

LV

ES

(N

ote

6)

GATE C1S C1R, C1RSG

BALL C2S, C2SF C2R, C2RF

PLUG N/A

GLOBE C4S C4R

CHECK C5S C5R

NEEDLE C6S, C6SFM N/A

BUTTERFLY N/A

GAUGE C9S N/A

BOLTING (Note 7)





NOTES: -20/100 740










10. For underground lines from well head to manifold shall be SCH 80 (no internally coated)





Revision: 1

Page No.: 79 of 196




BRANDS

GATE

C1S

1 ½” and Smaller



C1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth C1R 6” and Larger Class 300#, CS body and bonnet (ASTM-

A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598

C1RSG 2” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, RF flanged ends per ASME B16.5, full port, through-conduit, bolted bonnet, rising stem, nonrising hand wheel, slab gate with floating seats for corrosive service. Fire tested API 6FA. Hand wheel or gear (6” and larger) operated. Design and test per API 6D

M&J Foster WKM

BALL C2S

1 ½” and Smaller



C2SF

1 ½” and Smaller






Revision: 1

Page No.: 80 of 196




BRANDS

BALL C2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB

or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


C2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

C2R 4” and Larger

Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


C2RF 4” and Larger

Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE C4S

1 ½” and Smaller



C4R 2” and Larger

Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1

Page No.: 81 of 196




BRANDS

CHECK C5S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598


C5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


C5R 4” and Larger

Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE C6S 1” and Smaller



C6SFM 1” and Smaller


GAUGE C9S ¾” and Smaller


AGCO HEX Swagelok





Revision: 1

Page No.: 82 of 196


SPECIFICATION “C1”


SERVICE: PROCESS FLUID (ASME B31.4)

SIZE 2 4 6 8 10 12 16 18 20 24 30

PIPE

SCH.80 0.438” WT 0.5” WT

ASTM A-106-B API-5L GR X65, FBE EXTERNAL COATING (BURIED PIPE)

BE, SMLS

FLANGES

SCH.80 0.438” WT 0.5” WT

ASTM A-105 ASTM-A694 F65

300# RF, WN

ANCHOR FLANGES

N/A

0.438” WT 0.5” WT

ASTM-A694 F65

300# RF, WN

Design Code ASME B31.4, Temperature Differential per specific application, 1500 psi as standard Design concrete bearing stress

FITTINGS

SCH.80 0.438” WT 0.5” WT

ASME B16.9 FITTINGS

PIPE BENDS

ASTM A-234 WPB API-5L GR X65, FBE EXTERNAL COATING

BRANCH (BARRED TEE)

N/A

0.438” WT 0.5” WT

BW

ASTM A-860 WPHY 65, FBE EXTERNAL COATING

VA

LV

ES

BALL C1-2R C1-2RF

CHECK N/A C1-5R

BOLTING (Note 4)





NOTES: -20/100 740

1. Maximum design conditions: 250 °F - 667 PSIG (Group 1.1). 200 675

2. API 5L pipe shall be PSL2. 250 667

3. Pipe welding joints shall have a hardness in the "HAZ" not higher than 22 HRC.

4. Pipeline shall be underground installed unless otherwise is defined in the detail engineering.

5. Corrosion allowance = 1/8”

6. Minimum thickness for internal pressure only, structural minimum required thickness shall be evaluated on the basis of pipeline stress analysis, ASME code compliance and other applicable.

1





Revision: 1

Page No.: 83 of 196




BRANDS

BALL

C1-2R

2” – 4”

Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


6”

Class 300#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

C1-2RF 8” – 10” MLVs

ANSI Class 300, Welded End Connections, Full Port, Fully Welded Body with Rigid Trunnion Supported Ball, ASTM A350 LF2 Body, ASTM A350 LF2 – 1 to 3 mil ENP Ball/Trim & Seat, Welded End wall thickness matching pipeline WT, NACE II Bolting; Peek Seats, shall conform with API 6D and ISO 14313, shall comply with standards ANSI B16.5 and B16.10, MR-01-75/ ISO 15156 (when applicable), Fire-safe sealing according to API 607, 6FA, and ISO 10497, Independent floating spring loaded seats for tight seal at low differential pressures. Double piston effect seat design, Double block & bleed design, stem and seat lube and sealant injection fittings with internal check valves, double sealing on stem and bonnet. Tested by API 598. Shall include: Stem Extension (length according to specific datasheet), Two coats of Fenolic Coating, and Two Transition pipe pieces API-5L X65.

Cameron KF

1





Revision: 1

Page No.: 84 of 196




BRANDS

C1-2RF

MLVs

12” – 30”

ANSI Class 300, Welded End Connections, Full Port, Fully Welded Body with Rigid Trunnion Supported Ball, ASTM A350 LF2 Body, ASTM A350 LF2 – 1 to 3 mil ENP Ball/Trim & Seat, Welded End wall thickness matching pipeline WT, NACE II Bolting; Peek Seats, shall conform with API 6D and ISO 14313, shall comply with standards ANSI B16.5 and B16.10, MR-01-75/ ISO 15156 (when applicable), Fire-safe sealing according to API 607, 6FA, and ISO 10497, Independent floating spring loaded seats for tight seal at low differential pressures. Double piston effect seat design, Double block & bleed design, stem and seat lube and sealant injection fittings with internal check valves, double sealing on stem and bonnet. Tested by API 598. Shall include: Stem Extension (length according to specific datasheet), Two coats of Fenolic Coating, and Two Transition pipe pieces API-5L X65.

CHECK C1-5R 10” – 30”

Class 300#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598.

Cameron Tom Wheatley KF

1





Revision: 1

Page No.: 85 of 196




SERVICE: CORROSIVE PRODUCED OIL / WATER (PRODUCTION WELL PADS AND INLET PLANT)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24

PIPE

SCH 160 SCH 80 XS SCH 40



ASTM-A106 GR B, API-5L GR B

FLANGES


THRD 300# RF, WN


FITTINGS


THRD BW, SMLS


BRANCH (OLETS)

3000# SCH 80 XS SCH 40

THRD BW

ASTM-A105

VA

LV

ES

GATE C2-1S C2-1R

BALL C2-2S, C2-2SF C2-2R, C2-2RF

PLUG N/A

GLOBE C2-4S C2-4R

CHECK C2-5S C2-5R

NEEDLE C2-6S, C2-

6SFM N/A

BUTTERFLY N/A

GAUGE C2-9S N/A

BOLTING (Note 4)

Bolts: ASTM-A193 GR B7 Fluorocarbon Coated Thread and dimensions per ASME B16.5

Nuts: ASTM-A194 GR 2H Fluorocarbon Coated Heavy Hex Nuts



NOTES: -20/100 740


2. This specification will be used Only for new systems 250 667








Revision: 1

Page No.: 86 of 196




BRANDS

GATE

C2-1S

1 ½” and Smaller



C2-1R 2” – 4” Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


C2-1R 6” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats. RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598

BALL All Services

C2-2S

1 ½” and Smaller



C2-2SF

1 ½” and Smaller



C2-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


C2-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

1





Revision: 1

Page No.: 87 of 196




BRANDS


C2-2R 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


C2-2RF 4” and Larger Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

BALL HO PF Services

C2-2R 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


4” – 12” Class 300#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 300#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

C2-2RF 2” – 3” Class 300#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34


4” – 12” Class 300#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

1





Revision: 1

Page No.: 88 of 196




BRANDS

14” and Larger Class 300#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (6” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE C2-4S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


C2-4R 2” and Larger Class 300#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK C2-5S

1 ½” and Smaller

Class 800# (1975# CWP), FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, threaded or bolted cover. Design per API 602. Test per API 598


C2-5R 2” - 3” Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


C2-5R 4” and Larger Class 300#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

1





Revision: 1

Page No.: 89 of 196




BRANDS

NEEDLE C2-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


C2-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE C2-9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug

AGCO HEX Swagelok

1





Revision: 1

Page No.: 90 of 196


SPECIFICATION “D”



SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24

PIPE

SCH 160 SCH 80



FLANGES


THD 600# RF, WN

ASTM-A105

FITTINGS

6000# 3000# Wall Thickness to Match Pipe

THD BW, SMLS


BRANCH (OLETS)

6000# 3000# SCH 80

THD BW

ASTM-A105

VA

LV

ES

GATE D1S D1R

BALL D2S, D2SF D2R, D2RF

PLUG N/A

GLOBE D4S D4R

CHECK D5S D5R

NEEDLE D6S, D6SFM N/A

BUTTERFLY N/A

GAUGE D9S N/A

BOLTING (Note 3)

Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per ASME B16.5

Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts



NOTES: -20/100 1480









Revision: 1

Page No.: 91 of 196




BRANDS

GATE

D1S

1 ½” and Smaller

Class 800# (1975# CWP), CS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


D1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


D1R 4” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598

BALL

All Services

D2S

1 ½” and Smaller



D2SF

1 ½” and Smaller



D2R 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D






Revision: 1

Page No.: 92 of 196




BRANDS


D2RF 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


BALL HO PF Services

D2R 2” – 4” Class 600#, FS body (ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


6”-12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

D2RF 2” – 4” Class 600#, FS body (ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

AOP Balon Cameron DHV Grove KF MTS Nibco Nutron





Revision: 1

Page No.: 93 of 196




BRANDS

6”-12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

PBV Quadrant TK Velan WKM

14” and larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE D4S

1 ½” and Smaller



D4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK D5S

1 ½” and Smaller







Revision: 1

Page No.: 94 of 196




BRANDS

CHECK D5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


D5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE D6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


D6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE D9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug

AGCO HEX Swagelok





Revision: 1

Page No.: 95 of 196


SPECIFICATION “D1”



SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24

PIPE

SCH 160 SCH 80

THRD BE, SMLS/ ERW-HFI

ASTM-A106 GR B, GALV ASTM-A106 GR B, API-5L GR B, Internally Coated (Note 5)

FLANGES


THRD 600# RF, WN


FITTINGS


THRD BW, SMLS


BRANCH (OLETS)

3000# SCH 80

THRD BW


VA

LV

ES

(N

ote

6)

GATE D1-1S D1-1R, D1-1RSG

BALL D1-2S, D1-2SF D1-2R, D1-2RF

PLUG N/A

GLOBE D1-4S D1-4R

CHECK D1-5S D1-5R

NEEDLE D1-6S, D1-6SFM N/A

BUTTERFLY N/A

GAUGE D1-9S N/A

BOLTING (Note 7)




NOTES: -20/100 1480


2. This specification shall be used Only for replacement of existing systems 250 1335












Revision: 1

Page No.: 96 of 196




BRANDS

GATE

D1-1S

1 ½” and Smaller

Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, graphite packing, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


D1-1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth D1-1R 4” and Larger Class 600#, CS body and bonnet (ASTM-

A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Design per API 600. Test per API 598

D1-1RSG 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, RF flanged ends per ASME B16.5, full port, through-conduit, bolted bonnet, rising stem, nonrising hand wheel, slab gate with floating seats for corrosive service. Fire tested API 6FA. Hand wheel or gear (4” and larger) operated. Design and test per API 6D

M&J Foster WKM

BALL D1-2S

1 ½” and Smaller



D1-2SF

1 ½” and Smaller






Revision: 1

Page No.: 97 of 196




BRANDS

BALL D1-2R 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


D1-2RF 2” and Larger Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), internally coated, 316 SS ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE D1-4S

1 ½” and Smaller



D1-4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK D1-5S

1 ½” and Smaller







Revision: 1

Page No.: 98 of 196




BRANDS

CHECK D1-5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598

AOP Balon Bonney Forge Crane DHV DSI KF Eagle MTS Newco PBV SCV Tom Wheatley Velan Walworth Wheatley

D1-5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE D1-6S 1” and Smaller



D1-6SFM 1” and Smaller


GAUGE D1-9S 3/4” and Smaller


AGCO HEX Swagelok





Revision: 1

Page No.: 99 of 196





SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10

PIPE

SCH 80S SCH 40S SCH 80S


ASTM-A312 TP 304

FLANGES


SW 600# RF, WN

ASTM-A182 F 304

FITTINGS


SW BW, SMLS


BRANCH (OLETS)

3000# SCH 40S SCH 80S

SW BW

ASTM-A182 F 304

VA

LV

ES

GATE D3-1S, D3-1Z N/A

BALL N/A D3-2R, D3-2RF

PLUG N/A

GLOBE D3-4R

CHECK N/A D3-5R, D3-5RP


BUTTERFLY N/A

GAUGE D3-9S N/A

BOLTING (Note 5)


GASKETS 600# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with SS outer ring (Flexitallic Style CG, Lamons Style WR, Garlock Style RW – USA ONLY. Carrara Style SWC - ITALY ONLY)


NOTES: -20/100 1440

1. Maximum design conditions: 250 °F - 1137 PSIG (Group 2.1) 2. Valve elastomers in contact with process fluids shall be suitable for exposure to Hydrogen Sulfide, Carbon Dioxide and Aromatics

200 1200

250 1137









Revision: 1

Page No.: 100 of 196




BRANDS

GATE

D3-1S

1 ½” and Smaller



D3-1Z

1 ½” and Smaller


BALL

D3-2R 2” and Larger Class 600#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D


D3-2RF 2” and Larger Class 600#, 316 SS body, ball and stem, TFE seat, RF flanged ends per ASME B16.5, top or end entry, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

GLOBE

D3-4R

2” and Larger Class 600#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1





BRANDS

CHECK

D3-5R 2” - 3” Class 600#, 316 SS body and cover, Trim

12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


D3-5R 4” and Larger Class 600#, 316 SS body and cover, Trim 12, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

D3-5RP 2” and Larger Class 600#, 316 SS body, piston and spring, hard faced seat, RF flanged ends per ASME B16.5, bolted cap. Test per API 598


NEEDLE

D3-6S 1” and

Smaller 2000 PSI @ 400 F, bar stock body (316 SS), Teflon stem seat, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


D3-6SFM 1” and Smaller


GAUGE

D3-9S ¾” and Smaller


AGCO HEX Swagelok





Revision: 1





SERVICE: PROCESS FLUID (ASME B31.4)

SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 14 16 18 20 24 30

PIPE

SCH XXS

SCH 160 SCH XS SCH 40 0.375” 0.406” 0.438” 0.5” 0.562” 0688”

PE/THD BE, SMLS/ ERW-HFI

ASTM-A106 GR B API 5L X42, SMLS/ ERW-HFI

API-5L X65, PSL-2, SMLS/ ERW-HFI

FLANGES

Flange Bore to Match Pipe Wall

SOCKED WELDED 600# RF, WN

ASTM-A105 ASTM-A694 F65

ANCHOR FLANGES

ASTM-A694 F65

600# RF, WN

Design Code ASME B31.4, Temperature Differential per specific application, 1500 psi as standard design concrete bearing stress

FITTINGS


SW / THD BW, SMLS

ASTM-A105 ASTM-A234

GR WPB ASTM-A860 GR WPHY

BRANCH (OLETS)

6000# 3000#

THD BW

ASTM-A105

VA

LV

ES

GATE D5-1S, D5-1Z D5-1R

BALL D5-2S, D5-2SF D5-2Z, D5-2ZF

D5-2R D5-2RF

PLUG N/A

GLOBE D5-4S, D5-4Z D5-4R

CHECK D5-5S, D5-5Z D5-5R


BUTTERFLY N/A

GAUGE D5-9S N/A

BOLTING

Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per

ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts

GASKETS

300# RF, Thk 1/8”, 316 SS Spiral Wound, filler material: Flexible Graphite (FG) with CS outer and inner ring (Flexitallic Style CGI, Lamons Style WRI, Garlock Style RWI – USA ONLY. Carrara Style SWC/I - ITALY ONLY)


NOTES: -20/100 1480



3. Pipe welding joints shall have a hardness in the "HAZ" not higher than 22 HRC.

4. Pipeline shall be underground installed unless otherwise is defined in the detail engineering.


6. Minimum thickness for internal pressure only, structural minimum required thickness shall be evaluated on the basis of pipeline stress analysis, ASME code compliance and other applicable.





Revision: 1





BRANDS

GATE

D5-1S

1 ½” and Smaller



D5-1Z

1 ½” and Smaller

Class 800# (1975# CWP), CS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, socket welded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

D5-1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


D5-1R 4” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598

BALL D5-2S

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598


D5-2Z

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled teflon seats, socket welded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598

D5-2SF

1 ½” and Smaller


D5-2ZF

1 ½” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled teflon seats, socket welded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598

1





Revision: 1





BRANDS

D5-2R 2” – 4” Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


6” – 12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

BALL D5-2RF 2” – 4” Class 600#, CS body (ASTM-A216 Gr

WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


6” – 12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

1





Revision: 1





BRANDS

MLVs ANSI Class 600, Welded End Connections, Full Port, Fully Welded Body with Rigid Trunnion Supported Ball, ASTM A350 LF2 Body, ASTM A350 LF2 – 1 to 3 mil ENP Ball/Trim & Seat, welded ends, wall thickness matching pipeline WT, NACE II Bolting; Peek Seats, shall conform with API 6D and ISO 14313, shall comply with standards ANSI B16.5 and B16.10, MR-01-75/ ISO 15156 (when applicable), Fire-safe sealing according to API 607, 6FA, and ISO 10497, Independent floating spring loaded seats for tight seal at low differential pressures. Double piston effect seat design, Double block & bleed design, stem and seat lube and sealant injection fittings with internal check valves, double sealing on stem and bonnet.Tested by API 598. Shall include: Stem Extension (length according to specific datasheet), Two coats of Fenolic Coating, and Two Transition pipe pieces API-5L X65.

Cameron

KF

GLOBE D5-4S

1 ½” and Smaller



D5-4Z

1 ½” and Smaller

Class 800# (1975# CWP), FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, socket welded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598

D5-4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK D6-5S

1 ½” and Smaller


AOP Balon Bonney Forge DHV DSI KF Eagle

1





Revision: 1





BRANDS

D6-5Z

1 ½” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, HF Stellite® seats, socket welded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

Newco Tom Wheatley Velan Vogt Wheatley

D6-5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


D6-5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE D6-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


D6-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE D6-9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug

AGCO HEX Swagelok

1





Revision: 1





SERVICE: PROCESS HYDROCARBONS / PRODUCED GAS (HOT OR DRY SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 18 20 24

PIPE

SCH XXS SCH 160

SCH 80



FLANGES


THD 600# RF, WN

ASTM-A105

FITTINGS

6000# 3000# Wall Thickness to Match Pipe

THD BW, SMLS


BRANCH (OLETS)

6000# 3000# SCH 160

SCH 80

THD BW

ASTM-A105

VA

LV

ES

GATE D6-1S D6-1R

BALL D6-2S, D6-2SF D6-2R, D6-2RF

PLUG N/A

GLOBE D6-4S D6-4R

CHECK D6S D6R


BUTTERFLY N/A

GAUGE D6-9S N/A

BOLTING (Note 3)

Bolts: ASTM-A193 GR B7, Fluorocarbon Coated Thread and dimensions per

ASME B16.5 Nuts: ASTM-A194 GR 2H, Fluorocarbon Coated Heavy Hex Nuts



NOTES: -20/100 1480










Revision: 1





BRANDS

GATE

D6-1S

1 ½” and Smaller



D6-1R 2” – 3” Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DHV DSI MTS Newco Velan Vogt Walworth D6-1R 4” and Larger Class 600#, CS body and bonnet (ASTM-

A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598

BALL

D6-2S

1 ½” and Smaller



D6-2SF

1 ½” and Smaller


D6-2R 2” – 4” Class 600#, CS body (ASTM-A216 Gr WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D






Revision: 1





BRANDS

6” – 12” Class 600#, FS body (ASTM-A105), CS 3

mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

BALL D6-2RF 2” – 4” Class 600#, CS body (ASTM-A216 Gr

WCB or ASTM-A105), SS-316 ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


6” – 12” Class 600#, FS body (ASTM-A105), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

14” and Larger Class 600#, FS body (ASTM-A350 LF2), CS 3 mil ENP ball and stem, PEEK seats, RF flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE D6-4S

1 ½” and Smaller







Revision: 1





BRANDS

D6-4R 2” and Larger Class 600#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK D6-5S

1 ½” and Smaller



D6-5R 2” - 3” Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


D6-5R 4” and Larger Class 600#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE D6-6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


D6-6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE D6-9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug

AGCO HEX Swagelok





Revision: 1



SPECIFICATION “E”

CLASS: ANSI 900# CS, RTJ


SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24

PIPE (Note 3)

SCH 160 SCH 80 SCH 120

THD (Note 4)/PE BE, SMLS / ERW-HFI


FLANGES

1500# RTJ Flange Bore to Match Pipe Wall

SW 900# RTJ, WN

ASTM-A105

FITTINGS


SW BW, SMLS


BRANCH (OLETS)

6000# SCH 80 SCH 120

SW BW

ASTM-A105

VA

LV

ES

(N

ote

2)

GATE E1S, E1Z E1J

BALL E2S, E2SF, E2Z, E2ZF E2J, E2JF

PLUG N/A

GLOBE E4S, E4Z E4J

CHECK E5S, E5Z E5J

NEEDLE E6S, E6SFM N/A

BUTTERFLY N/A

GAUGE E9S N/A

CHOKE N/A E0J N/A

BOLTING (Note 5)


GASKETS 1500# / 900# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated (Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)



NOTES: -20/100 2220


2. E1S, E2S, E4S, E5S may be used for vent, drain, sample and instrument service Only 250 2000

3. All welds in WT over 0.750” to be stress relieved per ASME B31.3








Revision: 1





BRANDS

GATE

E1S 1 ½” and

Smaller Class 1500# (3705# CWP), FS body and bonnet, (ASTM-A105), Trim 8, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


E1Z 1 ½” and Smaller


E1J 2” – 3” Class 900#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Hand wheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DSI MTS Newco Velan Vogt Walworth

E1J 4” and Larger Class 900#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598

BALL

E2S

1 ½” and Smaller

2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598


E2Z

1 ½” and Smaller

2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, reduced port, lever operated. Fire safe. Test per API 598

E2SF

1 ½” and Smaller

2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598





Revision: 1





BRANDS

BALL E2ZF

1 ½” and Smaller

2220 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socked weld ends per ASME B16.11, full port, lever operated. Fire safe. Test per API 598


E2J

2” and Larger Class 900#, FS body (ASTM-A105), CS 1 mil ENP ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


E2JF 2” and Larger Class 900#, FS body (ASTM-A105), CS 1 mil ENP ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE E4S

1 ½” and Smaller



E4Z

1 ½” and Smaller


E4J 2” and Larger Class 900#, FS body and bonnet (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1





BRANDS

CHECK E5S

1 ½” and Smaller



E5Z

1 ½” and Smaller


E5J 2” - 3” Class 900#, FS body and cover (ASTM- ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


E5J 4” and Larger Class 900#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE E6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


E6SFM 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, FM x FM threaded ends per ASME B1.20.1. Design per MSS SP-105

GAUGE E9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug

AGCO HEX Swagelok

CHOKE

E0J 1” – 10” Class 900#, FS body (AISI 8620 or better) SS Trim, RTJ flanged ends per ASME B16.5. TECHNICAL DATA: CV Max. Operation Temperature. Max Operating Pressure .

Master Flo





Revision: 1



SPECIFICATION “E3”

CLASS: ANSI 900# SS, RTJ


SIZE 1/2 3/4 1 1 1/2 2 3 4 6

PIPE

SCH 80S SCH 40S SCH 80S


ASTM-A312 TP 304

FLANGES


SW 900# RTJ, WN

ASTM-A182 F 304

FITTINGS


SW BW, SMLS


BRANCH (OLETS)

6000# SCH 40S SCH 80S

SW BW

ASTM-A182 F 304

VA

LV

ES

GATE E3-1S, E3-1Z N/A

BALL E3-2J, E3-2JF

PLUG N/A

GLOBE E3-4J N/A

CHECK N/A E3-5J, E3-5JP

NEEDLE E3-6S, E3-6SFM N/A

BUTTERFLY N/A

GAUGE E3-9S N/A

BOLTING (Note 5)


GASKETS 900# RTJ, Oval Ring, Stainless Steel material, Annealed (Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)


NOTES: -20/100 2160


2. Valve elastomers in contact with process fluids shall be suitable for exposure to Hydrogen Sulfide, Carbon Dioxide and Aromatics

250 1707









Revision: 1





BRANDS

GATE

E3-1S

¾” and Smaller

Class 1500# (3705# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, graphite packing, all elastomeric seats and seals must be ED resistant, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


E3-1Z

¾” and Smaller

Class 1500# (3705# CWP), SS body and bonnet (ASTM-A351 Gr CF8M or ASTM-A182 F316), Trim 12, HF Stellite® seats, graphite packing, all elastomeric seats and seals must be ED resistant, socket weld ends per ASME B16.11, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

BALL E3-2J 1 ½” and Smaller

Class 900#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe per API 607. Test per API 598

KF Nutron PBV Velan WKM

E3-2JF 1 ½” and Smaller

Class 900#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe per API 607. Test per API 598

E3-2J 2” and Larger Class 900#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

AOP Cameron Grove KF MTS Nibco Nutron PBV Quadrant TK Velan WKM

E3-2JF 2” and Larger Class 900#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D





Revision: 1





BRANDS

GLOBE E3-4J

1 ½” and Smaller

Class 900#, 316 SS body and bonnet, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598


CHECK E3-5J 2” - 3” Class 900#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598

AOP Bonney Forge Crane DSI KF Eagle MTS Newco PBV Tom Wheatley Velan Walworth Wheatley

E3-5J 4” and Larger Class 900#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

E3-5JP 2” and Larger Class 900#, 316 SS body, piston and spring, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, bolted cap. Test per API 598


NEEDLE E3-6S 1” and Smaller



E3-6SFM 1” and Smaller


GAUGE E3-9S ¾” and Smaller


AGCO HEX Swagelok





Revision: 1






SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 16 20 24

PIPE (Note 3)

SCH 160 SCH 80 SCH 120

THD (Note 4)/PE BE, SMLS / ERW-HFI


FLANGES


SW 900# RTJ, WN

ASTM-A105, Internally Coated (Note 7)

FITTINGS


SW BW, SMLS

ASTM-A105 ASTM-A234 GR WPB, Internally Coated (Note 7)

BRANCH (OLETS)

6000# SCH 80 SCH 120

SW BW

ASTM-A105, Internally Coated (Note 7)

VA

LV

ES

(N

ote

s 2

,8)

GATE E5-1S E5-1J

BALL E5-2S, E5-2SF E5-2J, E5-2JF

PLUG N/A

GLOBE E5-4S E5-4J

CHECK E5-5S E5-5J

NEEDLE E5-6S, E5-6SFM N/A

BUTTERFLY N/A

GAUGE E5-9S N/A

CHOKE N/A N/A N/A

BOLTING (Note 5)


GASKETS 1500# / 900# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated (Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)



NOTES: -20/100 2220


2. E5-1S, E5-2S, E5-4S, E5-5S may be used for vent, drain, sample and instrument service only

250 2000












Revision: 1





BRANDS

GATE

E5-1S

1 ½” and Smaller



E5-1J 2” – 3” Class 900#, FS body and bonnet (ASTM- ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate. Handwheel operated. Design per API 600. Test per API 598

Bonney Forge Crane DSI MTS Newco Velan Vogt Walworth E5-1J 4” and Larger Class 900#, FS body and bonnet (ASTM-

A105), internally coated, Trim 12, HF stellated seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598

BALL E5-2S

1 ½” and Smaller

2160 PSI @ 100 °F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598


E5-2SF 1 ½” and Smaller

2160 PSI @ 100 °F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598





Revision: 1





BRANDS

BALL E5-2J 2” and Larger Class 900#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


E5-2JF 2” and Larger Class 900#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE E5-4S

1 ½” and Smaller



E5-4J 2” and Larger Class 900#, FS body and bonnet (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK E5-5S

1 ½” and Smaller







Revision: 1





BRANDS

CHECK E5-5J 2” - 3” Class 900#, FS body and cover (ASTM- ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


E5-5J 4” and Larger Class 900#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE E5-6S 1” and Smaller



E5-6SFM 1” and Smaller


GAUGE E5-9S 3/4” and Smaller


AGCO HEX Swagelok





Revision: 1



SPECIFICATION “F”



SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 14 16 18 20 24

PIPE (Note 5)

SCH 160 SCH 160

Calculation required

THD (Note 3)/PE BE, SMLS/ ERW-HFI


FLANGES


SW 1500# RTJ, WN

ASTM-A105

FITTINGS


SW BW, SMLS


BRANCH (OLETS)

6000# SCH 160 SCH 160

Calculation required

SW BW

ASTM-A105

VA

LV

ES

(N

ote

2)

GATE F1S, F1Z F1J

BALL F2S, F2SF, F2Z, F2ZF F2J, F2JF

PLUG N/A

GLOBE F4S, F4Z F4J, F4W

CHECK F5S, F5Z F5J

NEEDLE F6S N/A

BUTTERFLY N/A

GAUGE F9S N/A

CHOKE N/A F0J N/A

BOLTING (Note 6)


GASKETS 1500# RTJ, Octagonal Ring, Soft Iron material, Cadmium Plated coated (Flexitallic, Lamons, Wolar - USA ONLY. Carrara - ITALY ONLY)



NOTES: -20/100 3705


2. 1/2" and 3/4", F1S, F2S, F4S, F5S and XXS nipples may be used for sample and instrument service only

250 3328










Revision: 1





BRANDS

GATE

F1S

1 ½” and Smaller

Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted or welded bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

Bonney Forge DHV DSI Newco Smith Velan Vogt F1Z

1 ½” and Smaller

Class 1500# (3705# CWP), FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted or welded bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598

F1J 2” – 3” Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Hand wheel operated. Design per API 600. Test per API 598


F1J 4” and Larger Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598

BALL F2S

1 ½” and Smaller

6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598


F2Z

1 ½” and Smaller

6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socket welded ends per ASME B16.11, reduced port, lever operated. Fire safe. Test per API 598

F2SF

1 ½” and Smaller

6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598

F2ZF 1 ½” and Smaller

6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, socket welded ends per ASME B16.11, full port, lever operated. Fire safe. Test per API 598





Revision: 1





BRANDS

BALL F2J 2” and Larger Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated,. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


F2JF 2” and Larger Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated,. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE F4S

1 ½” and Smaller


Bonney Forge DHV DSI Newco Smith Velan Vogt F4Z

1 ½” and Smaller


F4J 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


F4W 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105), Trim 12, HF Stellite® seats, BW ends, SCH 160, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598

CHECK F5S

1 ½” and Smaller



F5Z

1 ½” and Smaller






Revision: 1





BRANDS

CHECK F5J 2” - 3” Class 1500#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


F5J 4” and Larger

Class 1500#, FS body and cover (ASTM-A105), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover.Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE F6S 1” and Smaller



GAUGE F9S ¾” and Smaller


AGCO HEX Swagelok

CHOKE F0J 1” – 10” Class 1500#, CS body (AISI 8620 or better), SS Trim, RTJ flanged ends per ASME B16.5. TECHNICAL DATA: CV Max. Temp Operation. Max Press Operation

Master Flo





Revision: 1



SPECIFICATION “F3”

CLASS: ANSI 1500# SS, RTJ


SIZE 1/2 3/4 1 1 1/2 2 3 4 6

PIPE

SCH 160


ASTM-A312 TP 304

FLANGES


SW 1500# RTJ, WN

ASTM-A182 F 304

FITTINGS


SW BW, SMLS


BRANCH (OLETS)

6000# SCH 160S

SW BW

ASTM-A182 F 304

VA

LV

ES

GATE N/A

BALL F3-2J, F3-2JF

PLUG N/A

GLOBE N/A

CHECK N/A F3-5J, F3-5JP

NEEDLE F3-6S, F3-6SFM N/A

BUTTERFLY N/A

GAUGE F3-9S N/A

BOLTING (Note 5)

Bolts: ASTM-A193 GR B8M Class 2 Thread and dimensions per ASME B16.5

Nuts: ASTM-A194 GR 8M, Heavy Hex Nuts



NOTES: -20/100 3600

1. Maximum design conditions: 250 °F - 2845 PSIG (Group 2.1) 2. Valve elastomers in contact with process fluids shall be suitable for exposure to

Hydrogen Sulfide, Carbon Dioxide and Aromatics

200 3000

250 2845

300 2690









Revision: 1





BRANDS

BALL F3-2J 1 ½” and Smaller

Class 1500#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, reduced port, lever operated. Floating ball. Fire safe per API 607. Test per API 598


F3-2JF 1 ½” and Smaller

Class 1500#, 316 SS body, ball and stem, filled TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, full port, lever operated. Floating ball. Fire safe per API 607. Test per API 598

F3-2J 2” and Larger Class 1500#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D


F3-2JF 2” and Larger Class 1500#, 316 SS body, ball and stem, TFE seat, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, top or end entry, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

CHECK F3-5J 2” - 3” Class 1500#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598

AOP Bonney Forge Crane DSI KF Eagle MTS Newco PBV Tom Wheatley Velan Walworth Wheatley

F3-5J 4” and Larger Class 1500#, 316 SS body, Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598





Revision: 1





BRANDS

CHECK F3-5JP 2” and Larger

Class 1500#, 316 SS body, piston and spring, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, bolted cap. Test per API 598


NEEDLE F3-6S 1” and Smaller



F3-6SFM 1” and Smaller


GAUGE F3-9S ¾” and Smaller


AGCO HEX Swagelok





Revision: 1






SIZE 1/2 3/4 1 1 1/2 2 4 6 8 10 12 14 16 18 20 24

PIPE (Note 5)

SCH 160

SCH XXH SCH 160 SCH 160

Calculations required

THRD (Note 3)/PE BE, SMLS/ ERW-HFI

ASTM-A106 GR C ASTM-A106 GR C, API-5L X56

FLANGES


SW 1500# RTJ, WN

ASTM-A105 ASTM A-694 F56

FITTINGS


SW BW, SMLS

ASTM-A105 ASTM-A234 GR

WPC ASTM-A860 WPHY F56

BRANCH (OLETS)

6000# SCH 160 SCH 160

Calculations required

SW BW

ASTM-A105

VA

LV

ES

(N

ote

2)

GATE F5-1S F5-1J

BALL F5-2S, F5-2SF F5-2J, F5-2JF

PLUG N/A

GLOBE F5-4S F5-4J

CHECK F5-5S F5-5J

NEEDLE F5-6S N/A

BUTTERFLY N/A

GAUGE F5-9S N/A

CHOKE N/A N/A N/A

BOLTING (Note 6)





NOTES: -20/100 3705


2. 1/2" and 3/4", F5-1S, F5-2S, F5-4S, F5-5S and XXS nipples may be used for vent, drain, sample and instrument service only

250 3328






1





Revision: 1





BRANDS

GATE

F5-1S

1 ½” and Smaller



F5-1J 2” – 3” Class 1500#, FS body and bonnet (ASTM- ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate. Handwheel operated. Design per API 600. Test per API 598


F5-1J 4” and Larger Class 1500#, FS body and bonnet (ASTM-A105), internally coated, Trim 12, HF stellated seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598

BALL F5-2S

1 ½” and Smaller

6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Test per API 598


F5-2SF 1 ½” and Smaller

6000# MAWP, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Test per API 598





Revision: 1





BRANDS

BALL F5-2J 2” to 10” Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, metal to metal seats, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


12” and Larger

Class 1500#, FS body (ASTM-A350 LF2), 316 SS ball and stem, metal to metal seats, RTJ flanged ends per ASME B16.5, reduced port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

F5-2JF 2” to 10” Class 1500#, FS body (ASTM-A105), 316 SS ball and stem, metal to metal seats,, flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

12” and Larger

Class 1500#, FS body (ASTM-A350 LF2), 316 SS ball and stem, metal to metal seats, RTJ flanged ends per ASME B16.5, full port, gear operated, trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE F5-4S

1 ½” and Smaller



F5-4J 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105) , Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1





BRANDS

CHECK F5-5S

1 ½” and Smaller



CHECK F5-5J 2” - 3” Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


F5-5J 4” and Larger Class 1500#, FS body and cover (ASTM-A105), Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE F5-6S 1” and Smaller



F5-6SFM 1” and Smaller


GAUGE F5-9S 3/4” and Smaller


AGCO HEX Swagelok





Revision: 1



SPECIFICATION “G”


SERVICE: HOT HIGH PRESSURE WATER INJECTION

SIZE 1/2 3/4 1 1-1/2 2 4 6 8 10 12 16 20 24

PIPE

SCH 160 SCH 160 Calculation required

THD (Note 5)/PE BE, SMLS/ ERW-HFI


FLANGES


SW 1500# RTJ, WN


FITTINGS


SW BW, SMLS


BRANCH (OLETS)

6000# SCH 160 SCH 160 Calculation required

SW BW


VA

LV

ES

(N

ote

7)

GATE Use Ball

BALL G2S, G2SF, G2Z, G2ZF G2J, G2JF

PLUG N/A

GLOBE G4S, G4Z G4J

CHECK G5S, G5Z G5J

NEEDLE G6S N/A

BUTTERFLY N/A

GAUGE G9S N/A

BOLTING (Note 8)

Bolts: ASTM-A193 GR B7 Fluorocarbon Coated Thread and dimensions per ASME

B16.5 Nuts: ASTM-A194 GR 2H Fluorocarbon Coated Heavy Hex Nuts




NOTES: -20/100 3705



3. 1/2" and 3/4", G2S, G4S, G5S and XXS nipples may be used for vent, drain, sample and instrument service Only.


5. Use only threaded pipe for valves connections










Revision: 1





BRANDS

BALL G2S 1-1/2” and Smaller

3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Floating ball. Fire safe. Test per API 598


G2Z 1-1/2” and Smaller

3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, reduced port, lever operated. Floating ball. Fire safe. Test per API 598

G2SF 1-1/2” and Smaller

3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Floating ball. Fire safe. Test per API 598

G2ZF 1-1/2” and Smaller

3395 PSI @ 200 F, FS body (ASTM-A105), Monel ball and stem, filled Teflon seats, socket weld ends per ASME B16.11, full port, lever operated. Floating ball. Fire safe. Test per API 598

G2J 2” and Larger

Class 1500#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, reduced port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D


G2JF 2” and Larger

Class 1500#, FS body (ASTM-A105), internally coated, 316 SS ball and stem, RTJ flanged ends per ASME B16.5, full port, lever or gear (4” and larger) operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

GLOBE G4S 1-1/2” and Smaller

Class 1500# (3705# CWP), FS body (ASTM-A105), and bonnet, Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598

Bonney Forge DHV DSI Newco Smith Velan Vogt G4Z 1-1/2” and

Smaller Class 1500# (3705# CWP), FS body (ASTM-A105), and bonnet, Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, OS&Y, bolted bonnet. Hand wheel operated. Design per API 602. Test per API 598





Revision: 1





BRANDS

GLOBE G4J 2” and Larger Class 1500#, FS body and bonnet (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598


CHECK G5S 1-1/2” and Smaller

Class 1500# (3705# CWP), FS body (ASTM-A105), Trim 12, HF Stellite® seats, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

Bonney Forge DHV KF Eagle Tom Wheatley Velan

G5Z 1-1/2” and Smaller

Class 1500# (3705# CWP), FS body (ASTM-A105), Trim 12, HF Stellite® seats, socket weld ends per ASME B16.11, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

G5J 2” - 3” Class 1500#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


G5J 4” and Larger Class 1500#, FS body and cover (ASTM-A105), internally coated, Trim 12, HF Stellite® seats, RTJ flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE G6S 1” and Smaller



GAUGE G9S ¾” and Smaller


AGCO HEX Swagelok





Revision: 1



SPECIFICATION “H”


SERVICE: PRODUCED GAS (HOT OR DRY SERVICE)

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 14 16 18

PIPE (Note 2)

SCH XXS 1.00 1.250 1.500 1.875 2.000 2.250 2.500

THD (Note 4)/PE BE, SMLS/ERW-HFI

ASTM-A106 GR B

ASTM-A106 GR C, API-5L GR X60

FLANGES


SW 2500# RTJ, WN FLANGELOK 2500#

SERIES WN

ASTM-A350 GR LF6 CL 2

FITTINGS


SW BW, SMLS

ASTM-A105 ASTM-A234 GR WPC, ASTM-A860 WPHY-60

Quenched & Tempered

BRANCH (OLETS)

9000# SCH XXS 1.00 1.250 1.500 1.875 2.000 2.250 2.500

SW BW

ASTM-A105

VA

LV

ES

GATE N/A H1J

BALL H2S H2X1 H2X2

H2J, H2JF

PLUG N/A

GLOBE N/A

CHECK N/A H5J

NEEDLE H6S N/A

BUTTERFLY N/A

GAUGE H9S N/A

BOLTING (Note 6)



FLANGELOK SEAL RING Bore to Match Pipe

NOTES: PRESS./TEMP. RATINGS °F PSIG REF. ASME B16.5 1. Maximum design conditions: 250 °F - 6160 PSIG (Group 1.2)

2. Threaded piping and valves (3/4” max) are allowed on instrument connections only

A flanged isolation valve is to be installed upstream of the threaded connections Threaded piping to be XXS (3/4” max)

-20/100 6250

200 6250

250 6160

3. The MDMT must be verified for all ASTM-106 B/C, API-5L X60, ASTM-A105 and

ASTM-A234 WPC materials with a wall thickness greater than 0.500”.


5. Vents and drains shall be 2” flanged.







Revision: 1





BRANDS

GATE

H1J 2” and Larger Class 2500# (6250 PSIG @ 100 °F), Forged CS body and bonnet (ASTM-A350 GR LF3), Trim 8, HF Stellite® seats, RTJ flanged ends per ASME B16.5, OS&Y, bolted bonnet, solid wedge gate, enclosed stem protector. Gear operated. Design per API 600. Test per API 598

Bonney Forge Edwards KF

BALL H2S

3/4” and Smaller 10000# CWP (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body, 316 SS ball and stem, Peek soft seat, EPDM seals, all elastomeric seats and seals must be ED resistant, compact valve, bolt-on female NPT connections on both ends, lever operated, bolted body construction, replaceable seat, block and bleed. Fire safe per API 6FA. Design and test per API 6D

Alco FMC Jamesbury Velan

H2X1 1” – 1 ½” 10000# CWP (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body, 316 SS ball and stem, Peek soft seat, EPDM seals, all elastomeric seats and seals must be ED resistant, compact valve, bolt-on female SW connection on one end and bolt-on ½” FNPT connection on other end, lever operated, bolted body construction, replaceable seat, block and bleed. Fire safe per API 6FA. Design and test per API 6D

H2X2 1” – 1 ½” 10000# CWP (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body, 316 SS ball and stem, Peek soft seat, EPDM seals, all elastomeric seats and seals must be ED resistant, compact valve, bolt-on female SW connection on one end and bolt-on blind flange on other end, lever operated, bolted body construction, replaceable seat, block and bleed. Fire safe per API 6FA. Design and test per API 6D





Revision: 1





BRANDS

BALL H2J 2” and Larger Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), 316 SS ball and stem, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, reduced port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

Cameron Grove KF Nutron PBV TK Velan

H2JF 2” and Larger Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), 316 SS ball and stem, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, full port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

CHECK H5J 2” - 3” Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted bonnet. Fire safe per API 6FD. Design and test per API 6D

KF Tom Wheatley Wheatley

H5J 4” and Larger Class 2500# (6250 PSIG @ 100 °F / 6000 PSIG @ 300 °F), Forged Steel body (ASTM-A350 GR LF3), Trim 12, HF Stellite® seats, all elastomeric seats and seals must be ED resistant, RTJ flanged ends per ASME B16.5, horizontal swing, bolted bonnet. Body drain ½” NPT. Fire safe per API 6FD. Design and test per API 6D





Revision: 1





BRANDS

NEEDLE H6S 1” and Smaller 10000# CWP, bar stock body (316SS), Teflon packing, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


GAUGE H9S ¾” and Smaller 10000# CWP, bar stock body (316 SS), Teflon stem seat, one male and three female, needle port, integral seat. Complete with bleeder valve and 316 SS plugs

AGCO

HEX

Swagelok





Revision: 1



SPECIFICATION “H3”

CLASS: ANSI 2500# SS, HUB


SIZE 1/2 3/4 1 1 ½ 2 3 4 6

PIPE

SCH XXS 0.750 1.125

PE BE, SMLS

ASTM-A312 TP 304

HUBS

Size 1 GR 4 1 GR 5 1 ½ GR 11 2 GR 14 3 GR 23 4 GR 31 6 GR 46

PN 53437D 53447D 53234D 52442D 52824D 53848D 52854D 55891D

Desc. GRAYLOC HUB, BW

Mat. ASTM-A182 F 316

CLAMPS

Size 1 1 ½ 2 2 ½-3 4 6

PN 50163WB 48501WB 48502WB 48503WB 48504WB A90059-6WB

Desc. GRAYLOC CLAMP WITH BOLTING

Mat. ASTM-A182 F 316

FITTINGS


SW BW, SMLS


VA

LV

ES

GATE N/A

BALL H3-2GF H3-2G, H3-2GF

PLUG N/A

GLOBE N/A

CHECK H3-5G H3-5G, H3-5GP

NEEDLE H3-6S N/A

BUTTERFLY N/A

GAUGE H3-9S N/A

BOLTING (Note 3)

Bolts: ASTM-A193 GR B8 Cl 1 Thread and dimensions per GRAYLOC Specifications Nuts: ASTM-A194 GR 8, Heavy Hex Nuts

SEALS

Size 4 5 11 14 23 31 46

PN 51267N 51268N 51270N 51272N 51284N 51276N 66225N

Desc. GRAYLOC SEAL RING

Mat. SS AISI 630 (17-4 PH), MoS2 with Graphite Coated

NOTES: PRESS./TEMP. RATINGS °F PSIG REF. ASME B16.5 1. Maximum design conditions: 250 °F - 4910 PSIG

2. Valve elastomers in contact with process fluids shall be suitable for exposure to wet

Carbon Dioxide.

-20/100 6000

200 5160

3. For ANSI Pipe Schedules, see ANNEX No. 7 250 4910





Revision: 1





BRANDS

BALL H3-2GF 1 ½” and Smaller

Class 2500#, 316 SS body, ball and stem, Teflon seals, Grayloc hub ends (hub bore to match pipe ID), full port, lever operated. Floating ball. Fire safe per API 607. Tscarevest per API 598

FMC Nutron TK Velan

H3-2G 2” and Larger Class 2500#, 316 SS body, ball and seats, stem and trunnion, peek seat inserts, EPDM seals, Grayloc hub ends (hub bore to match pipe ID), reduced port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

Cameron FMC Grove KF PBV TK Velan

H3-2GF 2” and Larger Class 2500#, 316 SS body, ball and seats, stem and trunnion, peek seat inserts, EPDM seals, Grayloc hub ends (hub bore to match pipe ID), full port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

CHECK H3-5G 1 ½” and Smaller

Class 2500#, 316 SS body, Trim 12, HF Stellite® seats ,PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), horizontal swing, bolted bonnet. Design per API 602. Test per API 598

KF Tom Wheatley Wheatley

2” - 3” Class 2500#, 316 SS body, Trim 12, HF Stellite® seats PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), swing check, horizontal or vertical service, bolted bonnet. Fire safe per API 6FD. Design and test per API 6D

4” and Larger Class 2500#, 316 SS body, Trim 12, HF Stellite® seats PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), swing check, horizontal or vertical service, bolted bonnet. Body drain ½” NPT. Fire safe per API 6FD. Design and test per API 6D





Revision: 1





BRANDS

CHECK H3-5GP 1 ½” and Larger Class 2500#, 316 SS body, Trim 12, HF Stellite® seats PTFE seals, all elastomeric seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), piston check, bolted bonnet. Fire safe per API 6FD. Design and test per API 6D

Bonney Forge Daniel KF Norriseal

NEEDLE H3-6S 1” and Smaller 10000# CWP, bar stock body (316SS), Teflon packing, peek seat material, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


GAUGE H3-9S ¾” and Smaller 10000# CWP, bar stock body (316 SS), Teflon stem seat, one male and three female, needle port, integral seat. Complete with bleeder valve and 316 SS plugs

AGCO HEX Swagelok





Revision: 1




CLASS: ANSI 2500# DUPLEX, HUB

SERVICE: PRODUCED GAS

SIZE 1/2 3/4 1 1 1/2 2 2 1/2 3 4 6

PIPE

SCH 80S 160

PE BE

ASTM-A790 S31803 Duplex, SMLS (P 10H – G 1)

HUBS

Size N/A

PN N/A

Desc. GRAYLOC HUB, BW, Bore to Match Pipe Wall

Mat. ASTM-A182 F51 (P 10H – G 1)

CLAMPS

Size N/A

PN N/A

Desc. GRAYLOC CLAMP WITH BOLTING

Mat. ASTM-A182 F51 (P 10H – G 1)

FITTINGS

Wall Thickness to Match Pipe

SW, SMLS BW, SMLS

ASTM-A182 F51 (P 10H – G 1) ASTM-A815 S31803, CLASS WP-S (P 10H – G 1)

VA

LV

ES

GATE N/A

BALL H4-2GF

PLUG N/A

GLOBE N/A

CHECK N/A

NEEDLE N/A

BUTTERFLY N/A

GAUGE N/A

BOLTING (Note 3)

Bolts: ASTM-A193 GR B8 CL 1 Thread and dimensions per GRAYLOC Specifications Nuts: ASTM-A194 GR 8, Heavy Hex Nuts

SEALS

Size N/A

PN N/A

Desc. GRAYLOC SEAL RING

Mat. SS AISI 630 (17-4 PH), MoS2 with Graphite Coated

NOTES:

1. Maximum design conditions: 200 °F - 6200 PSIG (Group 2.8) 2. Threaded joints shall be used only for instrumentation, vent, drains and similar purposes,

and shall be not larger than DN 15 (NPS ½”)



-20/100

6250

200 6200





Revision: 1





BRANDS

BALL H4-2GF 1 ½” and Smaller

Class 2500#, forged duplex ASTM-A182 F51 body, ball and stem, seats and seals must be ED resistant, Grayloc Hub ends (hub bore to match pipe ID), full port, lever operated. Floating ball. Fire safe per API 607. Test per API 598

ALCO HI-TEK

2” – 6” Class 2500#, forged duplex ASTM-A182 F51 body, ball and seats, stem and trunnion, seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), full port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

ALCO HI-TEK

H4-2G 2” – 6” Class 2500#, forged duplex ASTM-A182 F51 body, ball and seats, stem and trunnion, seats and seals must be ED resistant, Grayloc hub ends (hub bore to match pipe ID), reduced port, gear operated, bolted body construction. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe per API 6FA. Design and test per API 6D

ALCO HI-TEK





Revision: 1



SPECIFICATION “J”


SERVICE: INSTRUMENT AIR / UTILITY AIR / UTILITY WATER

SIZE 1/2 3/4 1 2 3 3 1/2 4 6 8 10 12 16 20 24

PIPE (Note 2)

SCH 160 SCH 80 STD

THD, SMLS BE, SMLS / ERW-HFI

ASTM-A53 GR B, GALV T&C ASTM-A53 GR B, API-5L GR B

FLANGES


THD 150# RF, WN


FITTINGS


THD BW, SMLS


BRANCH (OLETS)

N/A

STD

BW

ASTM-A105

VA

LV

ES

GATE J1S J1R

BALL J2S, J2SF J2R, J2RF

PLUG N/A

GLOBE J4S J4R

CHECK J5S J5R

NEEDLE J6S, J6SFM N/A

BUTTERFLY N/A J7RL, J7RW

GAUGE J9S

BOLTING (Note 3)




NOTES: -20/100 285


2. All galvanized piping shall be painted externally after fabrication according to Specification: PAM-EC-50-SP-001 “Coating Specification”

250 245







Revision: 1





BRANDS

GATE J1S

3” and Smaller

Class 800# (1975# CWP), FS body and bonnet, (ASTM-A105), Trim 8,HF Stellite® seats, threaded ends per ASME B1.20.1, OS&Y, bolted bonnet, solid wedge gate. Hand wheel operated. Design per API 602. Test per API 598


J1R 3 ½” – 4” Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Hand wheel operated. Design per API 600. Test per API 598


J1R 6” and Larger Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8. HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet, flexible wedge gate, Gear operated. Design per API 600. Test per API 598

BALL J2S

3” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Fire safe. Design per API 608. Test per API 598.


J2SF

3” and Smaller

1440 PSI @ 100 F, FS body (ASTM-A105), 316 SS ball and stem, filled Teflon seats, threaded ends per ASME B1.20.1, full port, lever operated. Fire safe. Design per API 608. Test per API 598.

J2R 3 ½” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem. RF flanged ends per ASME B16.5, reduced port, lever or gear (6”) operated, Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

AOP Balon Cameron DHV Grove KF MTS Nibco Nutron PBV Quadrant Velan TK WKM





Revision: 1





BRANDS

BALL J2RF 3 ½” – 6” Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, lever or gear (6”) operated. Floating ball. Fire safe. Design per API 608. Test per API 598 or ASME 16.34

AOP Balon Cameron DHV Grove KF MTS Nibco Nutron PBV Quadrant Velan TK WKM

J2R 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, reduced port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D


J2RF 8” and Larger Class 150#, CS body (ASTM-A216 Gr WCB or ASTM-A105), CS 1 mil ENP ball and stem, RF flanged ends per ASME B16.5, full port, gear operated. Trunnion mounted, double block and bleed and sealant injection fittings. Fire safe. Design and test per API 6D

GLOBE

J4S

3” and Smaller



J4R 3 ½” and Larger

Class 150#, CS body and bonnet (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Design per API 600. Test per API 598






Revision: 1





BRANDS

CHECK J5S

3” and Smaller

Class 800# (1975# CWP), FS body (ASTM-A105), steel plate cover, Trim 8, threaded ends per ASME B1.20.1, horizontal swing, screwed or bolted cover. Design per API 602. Test per API 598

AOP Balon Bonney Forge DSI DHV KF Eagle Newco Tom Wheatley Velan Vogt Wheatley

J5R 3 ½” Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Design per API 594. Test per API 598


J5R 4” and Larger Class 150#, CS body and cover (ASTM-A216 Gr WCB or ASTM-A105), Trim 8, HF Stellite® seats, RF flanged ends per ASME B16.5, horizontal swing, bolted cover. Body drain ½” NPT. Design per API 594. Test per API 598

NEEDLE J6S 1” and Smaller



J6SFM 1” and Smaller


BUTTER-FLY

J7RL 3 ½” and Larger

Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, lug to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598






Revision: 1





BRANDS

BUTTER-FLY

J7RW 3 ½” and Larger

Class 150#, CS body (ASTM-A216 Gr WCB), SS stem, bronze or iron disc, Viton seat, wafer to mate with RF flanges. Latch locking lever or gear (6” and larger) operated. Design per API 609. Test per API 598


GAUGE J9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug






Revision: 1



SPECIFICATION “L”

CLASS: ANSI 150# CS, FF

SERVICE: FIREWATER

SIZE 1/2 3/4 1 1 1/2 2 3 4 6 8 10 12 16 20 24

PIPE (Note 2)

SCH 160 SCH 80 STD

THD, GALV BE, SMLS/ ERW-HFI

ASTM-A106 GR B ASTM-A106 GR B, API-5L GR B, ASTM-A53 GR B

FLANGES

150# FF Flange Bore to Match Pipe Wall

THD 150# FF, WN


FITTINGS


THD BW, SMLS


BRANCH (OLETS)

N/A

STD

BW

ASTM-A105

VA

LV

ES

GATE L1S L1F

BALL L2S Use Gate

PLUG N/A

GLOBE L4S L4F

CHECK L5S L5W

NEEDLE L6S N/A

BUTTERFLY N/A L7FL, L7FW

GAUGE L9S N/A

BOLTING (Note 3)


GASKETS 150# FF, Thk 1/8", Comp. Non-asbestos, Synthetic fiber with NBR binder (Flexitallic, Lamons, Garlock - USA ONLY)


NOTES: -20/100 285


2. All galvanized piping shall be painted externally after fabrication according to Specification: PAM-EC-50-SP-001 “Coating Specification”

250 245







Revision: 1





BRANDS

ANGLE VALVE

2 1/2" Angle Hose Valve – Female NPT inlet x Male hose NH thread outlet, for use as fire hose outlet connection, Cast brass (Polished brass, rough chrome plated or polished chrome plated), 300 PSI, UL listed/FM Approved, shall include Cap with Chain

NFPA Member Brands

GATE

L1S 3” and Smaller Class 300# (600# CWP), cast bronze body and bonnet (ASTM-B62), bronze stem, threaded ends per ASME B1.20.1, OS&Y, union bonnet, solid wedge disc. Hand wheel operated. Test per API 598. UL/FM

Crane DSI Fairbanks Velan Vogt Walworth

L1F 4” Class 125#, cast iron body and bonnet (ASTM-A126 Class B), bronze stem, FF flanged ends per ASME B16.1, OS&Y, bolted bonnet, flexible wedge gate. Hand wheel operated. Test per API 598. UL/FM

Crane DSI Fairbanks Velan Walworth

L1F 6” and Larger 125# ANSI, cast iron body and bonnet (ASTM-A126 Class B), bronze stem, FF flanged ends per ASME B16.1, OS&Y, bolted bonnet, flexible wedge gate. Gear operated. Test per API 598. UL/FM

BALL L2S 3” and Smaller 285 PSIG @ 100 F, cast bronze body (ASTM-B62), bronze ball and stem, Teflon seats, threaded ends per ASME B1.20.1, reduced port, lever operated. Test per API 598

AOP Jamesbury Nibco Quadrant

GLOBE L4S 3” and Smaller Class 300# (600# CWP), cast bronze body and bonnet (ASTM-B62), bronze stem, threaded ends per ASME B1.20.1, OS&Y, union bonnet. Hand wheel operated. Test per API 598

Crane

DSI

Fairbanks

Powell Smith Vogt

L4F 4” and Larger 125# ANSI, cast iron body and bonnet (ASTM-A126 Class B), bronze trim, FF flanged ends per ASME B16.5, OS&Y, bolted bonnet. Hand wheel operated. Test per API 598

Crane DSI Fairbanks Velan Walworth





Revision: 1





BRANDS

CHECK L5S

3” and Smaller Class 300# (600# CWP), bronze body and cap (ASTM-B62), bronze disc, threaded ends per ASME B1.20.1, horizontal swing, screwed cover. Test per API 598. UL/FM

Bonney Forge

Crane

DSI Fairbanks

Nibco KF Eagle Wheatley

L5W 4” and larger 150# ANSI, cast iron body (ASTM-A126 Class B), aluminum bronze plates, monel spring, 316 SS shaft, Viton seal. Duo-Chek (wafer type). Test per API 598. UL/FM

Crane KF Eagle Mueller

NEEDLE L6S 1” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft or hard seats, M x FM threaded ends per ASME B1.20.1. Design per MSS SP-105


BUTTER-FLY

L7FL 4” and Larger 285 PSIG min CWP, ductile iron body, bronze or nickel plated iron disc, 316 SS shaft, Viton seat, lug type to mate with FF flanges, according to API 609. Hand wheel operated. Test per API 598

Bray

Center Line

Demco Flow seal Keystone KF Norris L7FW 4” and Larger 285 PSIG min CWP, ductile iron body,

bronze or nickel plated iron disc, 316 SS shaft, Viton seat, wafer type to mate with FF flanges, according to API 609. Hand wheel operated. Test per API 598

GAUGE L9S ¾” and Smaller 6000 PSI @ 200 F, bar stock body (316 SS), Teflon stem seat, soft seat material, one male and three female, needle port. Complete with bleeder valve and 316 SS hex plug






Revision: 1



15 ANNEXES

ANNEX No. 1: STRAINERS

ANNEX No. 2: ACCESS FITTINGS

ANNEX No. 3: INSULATING KITS

ANNEX No. 4: BLEED RINGS

ANNEX No. 5: GASKETS

ANNEX No. 6: BOLTS DIMENSIONS

ANNEX No. 7: ANSI PIPE SCHEDULES (CS & SS) [in]

ANNEX No. 8: INTERNAL COATING

ANNEX No. 9: API FLANGES

ANNEX No. 10: U-BOLTS DIMENSIONS

ANNEX No. 11: FBE EXTERNAL COATING

ANNEX No. 12: OVAL & OCTOGONAL RINGS

ANNEX No. 13: ACRYLIC THREAD SEALANT DATA SHEETS

ANNEX No. 14: GLOSSARY





Revision: 1



ANNEX No. 1: STRAINERS A1.1 TEMPORARY CONE STRAINERS DESCRIPTION: 1. Type of Strainer Required 2. Line Size: 3/4” – 36” 3. Mating Flange Rating: 150# - 1500# 4. Flange face type: RF, FF, RTJ 5. Length Required. If necessary 6. Material of Construction 7. Wire Mesh & Material if required

Example: TEMPORARY CONE STRAINERS FOR 10" LINE SIZE, 300#, FLANGE TYPE RF WITH 20 MESH (1/32" OPENINGS). CS BODY. 316 SS MESH. MODEL: WEAMCO TYPE CWO A1.2 STRAINERS TYPE “Y” DESCRIPTION: 1. Type of Strainer Required 2. Line Size: 3/4” – 36” 3. Mating Flange Rating: 150# - 1500# 4. Flange face type: RF, FF, RTJ 5. Mesh (Screen) 6. Material of Construction 7. Body drain

Example: STRAINER, TYPE "Y", 10" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN (MESH 12), CS BODY. 2" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC, TITAN A1.3 STRAINERS TYPE “BASKET” DESCRIPTION: 1. Type of Strainer Required 2. Line Size: 3/4” – 36” 3. Mating Flange Rating: 150# - 1500# 4. Flange face type: RF, FF, RTJ 5. Mesh (Screen) 6. Material of Construction 7. Body drain Example: BASKET STRAINER, 2" DIAM, 150#, RF FLANGED ENDS, 316 SS 1/16" PERFORATED SCREEN (MESH 12), 316 SS BODY. 1" NPT FOR BODY DRAIN. VENDOR MODELS: MUELLER, WEAMCO, IFC, TITAN





Revision: 1



ANNEX No. 2: ACCESS FITTINGS A2.1 FOR CHEMICAL INJECTION USE CHEMICAL INJECTION QUILL – KENKO KINJ model or similar





Revision: 1



A2.2 FOR SAMPLING CONNECTIONS DESCRIPTION: ROHRBACK COSASCO MODEL 57. TWO-INCH SYSTEM ACCESS FITTING ASSEMBLIES WITH SOLID PLUG, NON TEE BODY STYLE. MODEL: 57-141-0-72-S31600-1





Revision: 1







Revision: 1



ANNEX No. 3: INSULATING KITS A3.1 FOR STANDARD APPLICATIONS (SERVICE TEMPERATURE UP TO 302°F) DESCRIPTION: 2" INSULATING KIT, ANSI 300# RF, GPT VCS TYPE, G-10 GASKET, TEFLON (SPRING-ENERGIZED) SEAL, WITH COMPLETE SET OF GRE INSULATING FULL LENGHT SLEEVES, GRE INSULATING WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF). A3.2 FOR HIGH TEMPERATURE APPLICATIONS (e.g. HOT OIL SERVICE UP TO 392°F) DESCRIPTION: 2" INSULATING KIT, ANSI 300# RF, GPT VCS TYPE, G-11 GASKET, PTFE (SPRING-ENERGIZED) SEAL, WITH COMPLETE SET OF NOMEX® INSULATING FULL LENGHT SLEEVES, G-3 INSULATING WASHER AND ZPS WASHERS (FOR 2" ANSI 300#, FLANGE RF).





Revision: 1







Revision: 1



ANNEX No. 4: BLEED RINGS DESCRIPTION: BLEED RING, 4" DIAM RF, CLASS 300#, CS ASTM-A105 OR ASTM-A516 GR 70, DRAINAGE ORIFICE 3/4" DIAM NPT BLEED RINGS FOR ANSI 150 RF, 300 RF, 600 RF, 900 RF and 1500 RF

NPS [in]

B FOR RF [in]

A FOR RF [in] WEIGHT FOR RF [Lb]

CL150 CL300 CL600 CL900 CL1500 CL150 CL300 CL600 CL900 CL1500

1 1 1/4 2 1/2 2 3/4 2 3/4 3 3 2 2 2 3 3

1 1/2 1 7/8 3 1/4 3 5/8 3 5/8 3 3/4 3 3/4 3 3 3 4 4

2 2 5/16 4 4 1/4 4 1/4 5 1/2 5 1/2 4 5 5 9 9

2 1/2 2 3/4 4 3/4 5 5 6 3/8 6 3/8 5 6 6 11 11

3 3 5/8 5 1/4 5 3/4 5 3/4 6 1/2 6 3/4 6 8 8 11 12

4 4 5/8 6 3/4 7 7 1/2 8 8 1/8 9 11 13 16 16

6 6 3/4 8 5/8 9 3/4 10 3/8 11 1/4 11 12 19 23 30 28

8 8 1/2 10 7/8 12 12 1/2 14 13 3/4 18 27 31 44 42

10 10 5/8 13 1/4 14 1/8 15 5/8 17 17 24 32 47 62 62

12 12 3/4 16 16 1/2 17 7/8 19 1/2 20 3/8 37 43 57 77 89





Revision: 1



ANNEX No. 5: GASKETS

A5.1 FOR CS SPECIFICATIONS (150#, 300# and 600#; RF) DESCRIPTION: 3" GASKET, 300# RF, THK 1/8”, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE (FG) WITH CS OUTER RING. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC STYLE CG, LAMONS STYLE WR, GARLOCK STYLE RW – USA ONLY. CARRARA STYLE SWC – ITALY ONLY) A5.2 FOR SS SPECIFICATIONS (150#, 300# and 600#; RF) DESCRIPTION: 3" GASKET, 300# RF, THK 1/8”, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE (FG) WITH SS OUTER RING. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC STYLE CG, LAMONS STYLE WR, GARLOCK STYLE RW – USA ONLY. CARRARA STYLE SWC – ITALY ONLY) A5.3 FOR CS SPECIFICATIONS (150#; FF) DESCRIPTION: 3" GASKET, 150# FF, THK 1/8", COMP. NON-ASBESTOS, SYNTHETIC FIBER WITH NBR BINDER. DIMENSIONS PER ANSI B16.20/21 (FLEXITALLIC, LAMONS, GARLOCK - USA ONLY) A5.4 FOR CS SPECIFICATIONS (900# and 1500#; RTJ) DESCRIPTION: 3" GASKET, 1500# / 900# RTJ, OCTAGONAL RING, SOFT IRON MATERIAL, CADMIUM PLATED COATED (FLEXITALLIC, LAMONS OR WOLAR – USA ONLY. CARRARA – ITALY ONLY) A5.5 FOR SS SPECIFICATIONS (900# and 1500#; RTJ) DESCRIPTION: 3" GASKET, 1500# / 900# RTJ, OVAL RING, STAINLESS STEEL MATERIAL, ANNEALED (FLEXITALLIC, LAMONS OR WOLAR – USA ONLY. CARRARA – ITALY ONLY) A5.6 FOR PIPELINES (300# and 600#; RF) DESCRIPTION: 3" GASKET, 300# RF, RING 1/8”, 316 SS SPIRAL WOUND, FILLER MATERIAL: FLEXIBLE GRAPHITE (FG) WITH CS OUTER AND INNER RING (FLEXITALLIC STYLE CGI, LAMONS STYLE WRI, GARLOCK STYLE RWI – USA ONLY. CARRARA STYLE SWC/I – ITALY ONLY)





Revision: 1




150# RF 300# RF

SIZ

E

# B

OLT

S

STUD BOLT SIZE

SIZ

E

# B

OLT

S

STUD BOLT SIZE

DIA

M

LG

DIA

M

LG

½" 4 ½ 2 ½ ½" 4 ½ 2 ¾

¾" 4 ½ 2 ¾ ¾" 4 ⅝ 3 ¼

1" 4 ½ 2 ¾ 1" 4 ⅝ 3 ¼

1 ½" 4 ½ 3 1 ½" 4 ¾ 3 ¾

2" 4 ⅝ 3 ½ 2" 8 ⅝ 3 ¾

2 ½" 4 ⅝ 3 ¾ 2 ½" 8 ¾ 4 ¼

3" 4 ⅝ 3 ¾ 3" 8 ¾ 4 ½

4" 8 ⅝ 3 ¾ 4" 8 ¾ 4 ¾

6" 8 ¾ 4 ¼ 6" 12 ¾ 5

8" 8 ¾ 4 ½ 8" 12 ⅞ 5 ¾

10" 12 ⅞ 4 ¾ 10" 16 1 6 ½

12" 12 ⅞ 5 12" 16 1 ⅛ 7

14" 12 1 5 ½ 14" 20 1 ⅛ 7 ¼ 16" 16 1 5 ½ 16" 20 1 ¼ 7 ¾

18" 16 1 ⅛ 6 18" 24 1 ¼ 8

20" 20 1 ⅛ 6 ½ 20" 24 1 ¼ 8 ¼

24" 20 1 ¼ 7 24" 24 1 ½ 9 ¼

SE

RIE

S A

26" 24 1 ¼ 7 ½

SE

RIE

S A

26" 28 1 ⅝ 10 ½

28” 28 1 ¼ 7 ½ 28” 28 1 ⅝ 11

30” 28 1 ¼ 7 ¾ 30” 28 1 ¾ 11 ¾

36” 32 1 ½ 8 ¾ 36” 32 2 13 ¼

42” 36 1 ½ 9 ¼ 42” 36 1 ⅝ 14 ¼

600# RF 900# RF/RTJ

SIZ

E

# B

OLT

S

STUD BOLT SIZE

SIZ

E

# B

OLT

S

STUD BOLT SIZE

DIA

M

LG

DIA

M

LG

½" 4 ½ 3 ¼ ½" 4 ¾ 4 ½

¾" 4 ⅝ 3 ¾ ¾" 4 ¾ 4 ¾

1" 4 ⅝ 3 ¾ 1" 4 ⅞ 5 ¼

1 ½" 4 ¾ 4 ½ 1 ½" 4 1 5 ¾

2" 8 ⅝ 4 ½ 2" 8 ⅞ 6

2 ½" 8 ¾ 5 2 ½" 8 1 6 ½

3" 8 ¾ 5 ¼ 3" 8 ⅞ 6

4" 8 ⅞ 6 4" 8 1 ⅛ 7

6" 12 1 7 6" 12 1 ⅛ 8

8" 12 1 ⅛ 7 ¾ 8" 12 1 ⅜ 9

10" 16 1 ¼ 8 ¾ 10" 16 1 ⅜ 9 ½

12" 20 1 ¼ 9 12" 20 1 ⅜ 10 ¼

14" 20 1 ⅜ 9 ½ 14" 20 1 ½ 11 ¼

16" 20 1 ½ 10 ¼ 16" 20 1 ⅝ 11 ¾

18" 20 1 ⅝ 11 18" 20 1 ⅞ 13 ½

20" 24 1 ⅝ 11 ½ 20" 20 2 14 ½

24" 24 1 ⅞ 13 ¼ 24" 20 2 ½ 18 ¼





Revision: 1




1500# RTJ 2500# RTJ

SIZ

E

# B

OLT

S

STUD BOLT SIZE

SIZ

E

# B

OLT

S

STUD BOLT SIZE

DIA

M

LG

DIA

M

LG

½" 4 ¾ 4 ½ ½" 4 ¾ 5

¾" 4 ¾ 4 ¾ ¾" 4 ¾ 5 ¼

1" 4 ⅞ 5 ¼ 1" 4 ⅞ 5 ¾

1 ½" 4 1 5 ¾ 1 ½" 4 1 ⅛ 7

2" 8 ⅞ 6 2" 8 1 7 ¼

2 ½" 8 1 6 ½ 2 ½" 8 1 ⅛ 8 ¼

3" 8 1 ⅛ 7 ¼ 3" 8 1 ¼ 9 ¼

4" 8 1 ¼ 8 4" 8 1 ½ 10 ½

6" 12 1 ⅜ 10 ¾ 6" 8 2 14 ¼

8" 12 1 ⅝ 13 8" 12 2 15 ¾

10" 12 1 ⅞ 13 ¾ 10" 12 2 ½ 20 ¼

12" 16 2 15 ½ 12" 12 2 ¾ 22 ¼

14" 16 2 ¼ 17

16" 16 2 ½ 18 ¾

18" 16 2 ¾ 21

20" 16 3 22 ½

24" 16 3 ½ 25 ¾

BOLTS DIMENSIONS FOR GRAYLOC CONNECTIONS

2500# HUB

SIZ

E

# B

OLT

S

STUD BOLT SIZE

DIA

M

LG

1/2" 4 1/2 3 1/2

3/4" 4 1/2 3 1/2

1" 4 1/2 3 1/2

1 1/2" 4 5/8 5

2" 4 3/4 5 1/4

3" 4 3/4 6

4" 4 7/8 7

6" 4 1 1/8 9 3/8

NOTE: FOR INSULATING KITS, THE LENGTH OF STUD BOLTS INCREASES:

KITS UP TO 6 ", INCREASE 1"

KITS OVER 6 ", INCREASE 1.5"





Revision: 1



ANNEX No. 7: ANSI PIPE SCHEDULES (CS & SS) [in]

PIPE SIZE

OD 10 10S 20 30 STD

& 40S

40 60 XS & 80S

80 100 120 XXS 160

½ 0.840 0.083 0.083 0.109 0.109 0.147 0.147 0.294 0.188

¾ 1.050 0.083 0.083 0.113 0.113 0.154 0.154 0.308 0.219

1 1.315 0.109 0.109 0.133 0.133 0.179 0.179 0.358 0.250

1 ¼ 1.660 0.109 0.109 0.140 0.140 0.191 0.191 0.382 0.250

1 ½ 1.900 0.109 0.109 0.145 0.145 0.200 0.200 0.400 0.281

2 2.375 0.109 0.109 0.154 0.154 0.218 0.218 0.436 0.344

2 ½ 2.875 0.120 0.120 0.203 0.203 0.276 0.276 0.552 0.375

3 3.500 0.120 0.120 0.216 0.216 0.300 0.300 0.600 0.438

4 4.500 0.120 0.120 0.237 0.237 0.281 0.337 0.337 0.438 0.674 0.531

6 6.625 0.134 0.134 0.203 0.280 0.280 0.432 0.432 0.562 0.684 0.719

8 8.625 0.148 0.148 0.250 0.277 0.322 0.322 0.406 0.500 0.500 0.594 0.719 0.875 0.906

10 10.75 0.165 0.165 0.250 0.307 0.365 0.365 0.500 0.500 0.5940 0.719 0.844 1.000 1.125

12 12.75 0.180 0.180 0.250 0.330 0.375 0.406 0.562 0.500 0.688 0.844 1.000 1.000 1.312

14 14.0 0.188 0.250 0.312 0.375 0.375 0.438 0.594 0.500 0.750 0.938 1.094 1.406

16 16.0 0.188 0.250 0.312 0.375 0.375 0.500 0.656 0.500 0.844 1.031 1.219 1.594

18 18.0 0.188 0.250 0.312 0.438 0.375 0.562 0.750 0.500 0.938 1.156 1.375 1.781

20 20.0 0.219 0.250 0.375 0.500 0.375 0.594 0.812 0.500 1.031 1.281 1.500 1.969

22 22.0 0.250 0.375 0.500 0.375 0.875 0.500 1.125 1.375 1.625 2.125

24 24.0 0.250 0.250 0.375 0.562 0.375 0.688 0.969 0.500 1.219 1.531 1.812 2.344

26 26.0 0.312 0.500 0.625 0.375 0.500

28 28.0 0.312 0.500 0.625 0.375

30 30.0 0.312 0.312 0.500 0.625 0.375 0.500

36 36.0 0.312 0.500 0.625 0.375 0.750 0.500

42 42.0 0.375 0.375 0.500 0.500

48 48.0 0.375 0.375 0.500 0.500





Revision: 1



ANNEX No. 8: INTERNAL COATING A8.1 PLASITE 7159





Revision: 1







Revision: 1



A8.2 ENDURO BOND ENDURO-BONDTM Properties

An exceptional group of engineered thermal polymers allowing the process engineer greater versatility with a single material. ENDURO-BONDTM is characterized by flexibility and good retention of mechanical properties. ENDURO-BONDTM meets the demands of the modern materials and corrosion engineer.

Dimensional Stability Low coefficients of thermal expansion Low creep Low water absorption

Mechanical Properties High strength Wear resistant, excellent High strength/weight ratio

Thermal Properties Excellent long-term aging characteristics Heat deflection temperatures greater than 500°F

Chemical Resistance Stability at elevated temperatures. Resistant to a broad range of solvents, mineral and organic acids, alkalis and corrosive waters.

Processing Highly predictable shrinkage for close tolerances





Revision: 1



ANNEX No. 9: API FLANGES

DESCRIPTIONS:

2 9/16” FLANGE, WELDING NECK, API 6A TYPE 6B, 2 9/16" DIAM, 3000#, SCH 80, CS ASTM A105, RTJ, RING 27, DIMENSIONS PER API 6A / ASME B16.5 FLANGE, WELDING NECK, API 6A TYPE 6B, 2 9/16" DIAM, 5000#, SCH 80, CS ASTM A105, RTJ, RING 27, DIMENSIONS PER API 6A / ASME B16.5

RING FLANGE API, OCTOGONAL RING R27, SOFT IRON CADMIUM PLATED FOR FLANGE API 6B, 2 9/16" RTJ (FLEXITALLIC OR LAMONS)

BOLTS, STUD, 1" DIAM x 7" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER ASME B16.5

3 1/8” FLANGE, WELDING NECK, API 6A TYPE 6B, 3 1/8" DIAM, 3000#, SCH 80, CS ASTM A105, RTJ, RING 31, DIMENSIONS PER API 6A / ASME B16.5 FLANGE, WELDING NECK, API 6A TYPE 6B, 3 1/8" DIAM, 5000#, SCH 80, CS ASTM A105, RTJ, RING 35, DIMENSIONS PER API 6A / ASME B16.5


BOLTS, STUD, 1 1/8" DIAM x 6 1/2" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER ASME B16.5

4 1/16” FLANGE, WELDING NECK, API 6A TYPE 6B, 4 1/16" DIAM, 3000#, SCH 40 (80), CS ASTM A105, RTJ, RING 37, DIMENSIONS PER API 6A / ASME B16.5 FLANGE, WELDING NECK, API 6A TYPE 6B, 4 1/16" DIAM, 5000#, SCH 40 (80), CS ASTM A105, RTJ, RING 39, DIMENSIONS PER API 6A / ASME B16.5


BOLTS, STUD, 1 1/8" DIAM x 7 1/2" LG, FULL LENGTH THREADED, WITH TWO HEAVY HEX NUTS, CS ASTM A193 GR B7 / ASTM A194 GR 2H FLUOROCARBON COATED, THREADED AND DIMENSIONS PER ASME B16.5





Revision: 1







Revision: 1



ANNEX No. 10: U-BOLTS DIMENSIONS

U-BOLTS WITH 4 HEX NUTS

DN PIPE [in]

OD PIPE [in]

D LONG U

[mm] DIAM U

[in] LONG THD

[mm]

1/2 0.840 2 3/4 173 1/4 60

3/4 1.050 2 3/4 182 1/4 60

1 1.315 2 3/4 192 1/4 60

1 1/4 1.660 2 7/8 212 3/8 60

1 1/2 1.900 3 228 3/8 65

2 2.375 3 1/4 260 3/8 65

2 1/2 2.875 3 3/4 305 1/2 75

3 3.500 4 343 1/2 75

4 4.500 4 1/2 408 1/2 75

6 6.625 6 1/8 575 5/8 100





Revision: 1



ANNEX No. 11: FBE EXTERNAL COATING A11.1 3M SK 6233 - COATING





Revision: 1



A11.1 3M SCOTCHKOTE 323 – REPAIR & PATCH MATERIAL





Revision: 1







Revision: 1



A11.2 DUPONT NAP-GARD 7-1883 + NAP-ROCK 7-2610





Revision: 1







Revision: 1



A11.3 FBE REPAIR MATERIAL





Revision: 1







Revision: 1



A11.4 AKZONOBEL R-726LD+R-641





Revision: 1







Revision: 1



A11.5 DUPONT NAPGARD 7-1888

1





Revision: 1



1





Revision: 1



ANNEX No. 12: OVAL & OCTOGONAL RINGS A12.1 RINGS SELECTION TABLE FOR ASME B16.5 & API 6A FLANGES





Revision: 1







Revision: 1



ANNEX No. 13: ACRYLIC THREAD SEALANT DATA SHEETS A13.1 LOW STRENGHT ACRYLIC





Revision: 1







Revision: 1



A13.1 MEDIUM STRENGHT ACRYLIC





Revision: 1







Revision: 1



ANNEX No. 14: GLOSSARY

AFC Approved for construction ANSI American National Standards Institute API American Petroleum Institute ASME American Society of Mechanical Engineers ASTM American Society for Testing and Materials BE Beveled Ends BW Butt Welding CS Carbon Steel CWP Cold Working Pressure ED Explosive Decompression ENP Electroless Nickel Plating ERW Electric Resistance Welding FF Flat Face FG Flexible Graphite FS Forged Steel GR Grade HF Hard Faced HFI High Frequency Induction LR Long radius MAWP Maximum Allowable Working Pressure MDMT Minimum Design Metal Temperature MSS Manufacturers Standardization Society NPS Nominal Pipe Size NPT Nominal Pipe Thread OS&Y Outside Screw and Yoke PE Plain Ends PEEK Polyether Ether Ketone PSI Pounds per Square Inch PSIG Pounds per Square Inch Gauge RF Raised Face RP Recommended Practice RTJ Ring Type Joint SCH Schedule SMLS Seamless SP Standard Practice SR Short radius SS Stainless Steel STD Standard SW Socket Weld T&C Threaded & Coupled THD Threaded THK Thickness TP Type VCS Very Critical Service WN Welding Neck WOG Water, Oil and Gas

basic engineering, standart specification for pipe,valves

Documents

valves fittings document

identification of piping

valves fittings department

pipeline valves

proyectos document

bleed valves

process piping

piping drawings