basic command handling
TRANSCRIPT
-
8/4/2019 Basic Command Handling
1/25
BASIC COMMAND HANDLING
-
8/4/2019 Basic Command Handling
2/25
MANAGED OBJECT
A Managed Object is a logical representation of hardware units and
software in the BTS. As we are aware that nothing is visible from BSC
end that means it is necessary to define all hardware unit in as a logical
entity.
-
8/4/2019 Basic Command Handling
3/25
MANAGED OBJECTS
Transceiver Group (TG)Central Function (CF)
Digital Path (DP)
Concentrator (CON)
Transceiver Controller (TRX)Transmitter (TX)
Receiver (RX)
Interface Switch (IS)
Timing Function (TF)Time Slots (TS).
-
8/4/2019 Basic Command Handling
4/25
BASIC COMMANDS
-
8/4/2019 Basic Command Handling
5/25
RADIO CONTROL CELL
RESOURCESRLCRP:CELL=ALL;
RLCRP:CELL=CELL ID;
This command is used to see status of BCCH,CBCH,SDCCH etc
channels
-
8/4/2019 Basic Command Handling
6/25
Radio Control Cell Supervision of
Logical Channels AvailabilityData
RLSLP:CELL=ALL;
RLSLP:CELL=CELL ID;
This command prints out supervision of logical channels availabilitydata for the subcells of the specified cell .
-
8/4/2019 Basic Command Handling
7/25
RADIO X-CEIVER
ADMINISTRATION TG TO
CHANNEL GROUP
RXTCP:MOTY=RXOTG,CELL=CELL ID;
This command show either the channel groups connected to one or
more
TGs, or a list of channel groups connected to all the TGs of the
specified managed object type.
This command will also give a list of connected TG's to a cell
when the cell name is given.
-
8/4/2019 Basic Command Handling
8/25
RADIO X-CEIVER
ADMINISTRATION MANAGED
OBJECT FAULT INFORMATION
RXMFP:MO=RXOCF-;
This command initiates printing of fault information for one or
more managed object instances or all defined managed object
instances of a specified managed object type.
-
8/4/2019 Basic Command Handling
9/25
Radio X-ceiver Administration,
Managed Object Configuration Data
RXCDP:MO=RXOTG-;
This command is used to initiate printing of managed objectconfiguration data for one or more managed object instances.
-
8/4/2019 Basic Command Handling
10/25
RADIO X-CEIVER
ADMINISTRATION MANAGED
OBJECT STATUSRXMSP:MO=MO..;
RXMSP:MOTY=MOTY..;
This command prints the status information for one or more
managed objects or for all defined managed object instances of a
specified managed object type
-
8/4/2019 Basic Command Handling
11/25
RADIO X-CEIVER
ADMINISTRATION MANAGED
OBJECT ALARM SITUATIONSRXASP:MO=MO..;
RXASP:MOTY=MOTY..;
This command initiates printing of all alarm situations currently
outstanding in one or more managed object instances or all defined
managed object instances of a specified managed object type.
If the specified managed object instance or managed
object type is TG, then the alarm situations for the
subordinate objects are also printed.
-
8/4/2019 Basic Command Handling
12/25
Radio X-ceiver Administration,
Manual Blocking of Managed
Object, Initiate
RXBLI:MO=MO.,SUBORD,FORCE;
This command orders the manual blocking of one or more
managed object instances
If the FORCE parameter is given, the blocking order will beexecuted immediately
If the FORCE parameter is not given, the blocking order will not be
executed immediately
-
8/4/2019 Basic Command Handling
13/25
Radio X-ceiver Administration,
Manual Blocking of Managed
Object, End
RXBLI:MO=MO.,SUBORD;
This command orders the manual unblocking of one or more MO
instance.
-
8/4/2019 Basic Command Handling
14/25
RADIO CONTROL CELL
STATE
RLSTP:CELL=CELL ID;
RLSTP:CELL=ALL[,STATE=STATE];
The command initiates the answer printout CELL STATUS for
one, several or all internal cells. When parameter STATE is given
with ALL cells, the printout CELL STATUS is only produced for
cells of the specified state.
-
8/4/2019 Basic Command Handling
15/25
Radio Control Cell, State,
ChangeRLSTC:CELL=CELL ID,STATE=ACTIVE;
RLSTC:CELL=CELL ID,STATE=HALTED;
The command is used to change the state of a cell or channel
group.
-
8/4/2019 Basic Command Handling
16/25
-
8/4/2019 Basic Command Handling
17/25
TO FIND DIP ID FROM TG
VALUE
RXAPP:MO=RXOTG-;
RADEP:DEV=;
NTCOP:SNT;
-
8/4/2019 Basic Command Handling
18/25
-
8/4/2019 Basic Command Handling
19/25
RADIO CONTROL
ADMINISTRATION DEVICE
DATA
RADEP:DEV=;
The printout DEVICE DATA IN BSC is received for specified
devices, all devices of a device type, or all devices
-
8/4/2019 Basic Command Handling
20/25
Switching Network Terminal,
Connection Data
NTCOP:SNT;
This command prints the connection data of the SNTs
-
8/4/2019 Basic Command Handling
21/25
Alarm Functions, Alarm List
ALLIP:ACL=acl;
ALLIP:ACL=ALL;
This command prints the entire alarm list or a part of the alarm list.
-
8/4/2019 Basic Command Handling
22/25
-
8/4/2019 Basic Command Handling
23/25
-
8/4/2019 Basic Command Handling
24/25
-
8/4/2019 Basic Command Handling
25/25