www.hilti.com.sg Profis Anchor 2.5.2

Input data and results must be checked for agreement with the existing conditions and for plausibility!PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan

Company:Specifier:Address:Phone I Fax:E-Mail:

|

Page:Project:Sub-Project I Pos. No.:Date:

5

5/16/2015

Coordinates Anchor [mm]

Anchor x y c-x c+x c-y c+y1 0 -120 174 1105 200 -2 104 -60 278 1001 260 -3 105 60 279 1000 380 -

Anchor x y c-x c+x c-y c+y4 1 120 175 1104 440 -5 -103 60 71 1208 380 -6 -104 -60 70 1209 260 -

8 Installation dataAnchor plate, steel: - Anchor type and diameter: HIT-RE 500 + HAS(-E)R M12Profile: Pipe; 140 x 140 x 5 mm Installation torque: 0.040 kNmHole diameter in the fixture: df = 14 mm Hole diameter in the base material: 14 mmPlate thickness (input): 25 mm Hole depth in the base material: 110 mmRecommended plate thickness: not calculated Minimum thickness of the base material: 140 mmCleaning: Premium cleaning of the drilled hole is required

8.1 Recommended accessories

Drilling Cleaning Setting• Diamond core rig • Compressed air with required

accessories to blow from the bottom of the hole

• Proper diameter wire brush

• Dispenser including cassette and mixer• Dynamic set• Torque wrench

1

2

3

4

5

6

46 1 103 1 103 1 45

3060

111

91

6030

x

y

150 150

150

150