barsplicer data sheet revj - engineered mechanical splice ... · tolerance, bar grade and/or...
TRANSCRIPT
Unless otherwise specified, bars shall be ASTM A615 / A615M, Grade 60; Epoxy coated bars shall be ASTM A775 / A775M Grade 60; bend diameters and standard hook dimensions shall be per ACI Detailing Manual SP-66; length tolerances shall be per the CRSI Manual of Standard Practice. Customer is responsible for notifying BPI of any special space restrictions, tolerance, bar grade and/or strength requirements before placing order. All fabricated and/or in-process setting bars, splice bars and parts are non-cancellable and non-returnable.
B
CA
SETTING BARUNCOATED A615 OR A706,
EPOXY A775,GALVANIZED A767 OR A1094
SPLICE BARUNCOATED A615 OR A706,
EPOXY A775,GALVANIZED A767 OR A1094
OPTIONAL FLANGEAND PLASTIC PLUG
D
Using the following table is an easy way to organize your BPI® Barsplicer requirements. Many other configurations can be ordered as shown in the configuration chart on the back of this data sheet. Be sure to include the specific Setting and/or Splice bar OPTION PART NUMBER for easy reference.
QUANTITY BARSIZE
SETTING BAR(S) SPLICE BAR(S)SPECIFY LENGTHS (FEET - INCHES)SPECIFY LENGTHS (FEET - INCHES)WITH
FLANGE(CIRCLE)
BPI PARTNUMBER
(SEE CHART) ‘A’ ‘B’ OTHER
BPI® BARSPLICER
Y / N
BPI PARTNUMBER
(SEE CHART) ‘C’ ‘D’OTHERBS-
Y / N BS-Y / N BS-Y / N BS-Y / N BS-Y / N BS-
------
------
------
------
------
------
BS-BS-BS-BS-BS-BS-
UNCOATED,EPOXY OR
GALVANIZED
The most commonly used SETTING and SPLICE bars are STRAIGHT or have a 90 DEGREE HOOK as follows…HOW TO ORDER BPI® BARSPLICER SETTING AND SPLICE BARS
3/415/16
1 1/16
1 1/4
1 3/8
1 1/2
1 5/8
1 7/8
1 1/4
1 1/2
1 3/4
22 3/16
2 5/8
2 7/8
3 1/4
‘L’
0.220.370.550.951.422.152.503.75
‘D1’ ‘L’ ‘D2’3/4
15/16
1 1/161 1/41 3/81 1/21 5/81 7/8
1 3/4
22 3/8
2 13/16
3 1/4
3 3/4
44 1/2
0.480.771.302.143.274.725.567.90
5/8 – 11 UNC 3/4 – 10 UNC 7/8 – 9 UNC 1 – 8 UNC
1 1/8 – 7 UNC 1 1/4 – 7 UNC 1 3/8 – 6 UNC
1/2 – 13 UNC
BPI® BARSPLICER DoughNUT TM
(Meets ASTM A970 Class A & Class HA)
ALL DIMENSIONS ARE APPROXIMATE
REBARSIZE
THREADSIZE WEIGHT (lb)
TERM [5Ab] DNX [10Ab]WEIGHT (lb)
#4 (13)#5 (16)#6 (19)#7 (22)#8 (25)#9 (29)#10 (32)#11 (36)
L
D1
L
D2
1 3/81 1/21 3/4
22 1/42 5/8
33 5/8
7/8
1 1/16
1 1/4
1 3/8
1 5/8
1 3/4
22
0.160.210.400.520.851.311.651.66
3/161/41/4
5/163/87/161/29/16
WEIGHT ‘D’ WELDING BEVEL ‘B’‘L’
5/8 – 11 UNC 3/4 – 10 UNC 7/8 – 9 UNC 1 – 8 UNC
1 1/8 – 7 UNC 1 1/4 – 7 UNC 1 3/8 – 6 UNC
1/2 – 13 UNC SIZEBPI® BARSPLICER STRUCTURAL CONNECTOR THREAD#4 (13)#5 (16)#6 (19)#7 (22)#8 (25)#9 (29)#10 (32)#11 (36)
L
D
B
––––––––
0.220.300.360.500.901.502.302.38
7/8
11 1/8
1 1/4
1 1/2
1 3/4
22
1 3/42
2 1/82 1/2
33 1/2
44 1/2
WEIGHT ‘D’ FLANGE (NONE)THREAD ‘L’
5/8 – 11 UNC 3/4 – 10 UNC 7/8 – 9 UNC 1 – 8 UNC
1 1/8 – 7 UNC 1 1/4 – 7 UNC 1 3/8 – 6 UNC
1/2 – 13 UNC SIZEBPI® BARSPLICER COUPLER / POSITION COUPLER
STANDARD AND XP #4 (13)#5 (16)#6 (19)#7 (22)#8 (25)#9 (29)#10 (32)#11 (36)
L
D
1 3/42
2 1/82 1/2
33 1/2
44 1/2
1 5/81 5/81 5/8
22
2 3/82 3/82 3/8
2 7/162 7/162 7/162 15/162 15/163 3/83 3/83 3/8
0.280.350.430.540.951.632.432.54
7/8
11 1/8
1 1/4
1 1/2
1 3/4
22
5/8 – 11 UNC 3/4 – 10 UNC 7/8 – 9 UNC 1 – 8 UNC
1 1/8 – 7 UNC 1 1/4 – 7 UNC 1 3/8 – 6 UNC
1/2 – 13 UNC
WEIGHT(lb) DIAMETER
‘D’FLANGE
‘X’FLANGE
‘Y’
THREADSIZE
DIMENSIONS (in)
LENGTH‘L’
BPI® BARSPLICER COUPLER W/ OPTIONAL FLANGESTANDARD AND XP
#4 (13)#5 (16)#6 (19)#7 (22)#8 (25)#9 (29)#10 (32)#11 (36)
REBARSIZE
US (mm)
L
D
X
Y
DIMENSIONS AND DATA SHEETINCH-POUND UNITS
RE
V.J
11/
22/2
019
MEMBER
CRSI®Barsplice Products, Inc., 4900 Webster Street, Dayton OH 45414, USATel: (937) 275-8700 Fax: (937) 275-9566 E-mail: [email protected]
Copyright © 2019, Barsplice Products, Inc., "BPI". All rights reserved. www.barsplice.comMEMBER
DOWNLOAD THE FREE BARSPLICE APP AND FOLLOW US ON SOCIAL MEDIA!
While the information contained in this document is believed to be accurate at the time of publication, BPI reserves the right to make changes, design modifications, corrections and other revisions as it sees fit, without notice. All products described herein are supplied in accordance with BPI’s standard Terms and Conditions of Sale. This document is of a promotional nature only. Aspects of structural design, evaluation of product fitness for use, suitability or similar attributes are the responsibility of others.
Flanges are not structural in nature. Rebars may require supplemental support to maintain correct placement.
STRAIGHTSPECIFY
‘C’
90° BENDSPECIFY
‘C’ & ‘D’
180° HOOKSPECIFY
‘C’
45° BENDSPECIFY
‘C’ & ‘D’
135° BENDSPECIFY
‘C’ & ‘D’
DOUBLE ENDSPECIFY
‘C’ & ‘Z’
CONTINUITYDOUBLE END
SPECIFY‘C’
POSITIONALSTRAIGHT
SPECIFY‘CP’
POSITIONAL90° BEND
SPECIFY‘CP’ & ‘D’
HEADEDSTRAIGHT
SPECIFY‘C’
BPI® SPLICE BAR OPTIONS AND PART NUMBERS
BS-H
BS-G
BS-I
BS-P
BS-R
BS-O
BS-N
BS-L
BS-M
BS-TC
CP
C
C
Z
C
D
C D
C
STD DIAMETER PER ACI
C
C
D
CP
D
BPI® SETTING BAR OPTIONS AND PART NUMBERS
BS-B
BS-F
BS-E
BS-C
BS-Q
BS-A
BS-D
BS-J
BS-K
BS-S
STRAIGHTSPECIFY
‘A’
90° BENDSPECIFY
‘A’ & ‘B’
180° HOOKSPECIFY
‘A’
45° BENDSPECIFY
‘A’ & ‘B’
135° BENDSPECIFY
‘A’ & ‘B’
DOUBLE ENDSPECIFY
‘A’
U-SHAPEDOUBLE END
SPECIFY‘A’ & ‘B’
POSITIONALSTRAIGHT
SPECIFY‘AP’
POSITIONAL90° BEND
SPECIFY‘AP’ & ‘B’
HEADEDSTRAIGHT
SPECIFY‘A’
A
A
STD DIAMETER PER ACI
AB
A
BA
A
B
A
A
B
AP
B
AP
The following chart shows the standard options and the dimensions to specify when ordering Barsplicer setting and splice bars.Other configurations can be manufactured to order… just fax or e-mail a sketch to Barsplice Products, Inc. with your requirements.
BPI® BARSPLICER CONFIGURATION CHART