Bar Code ScannerBar Code Scanner

Software Software Installation GuideInstallation Guide

2007.03.31

Step 1: Install Microsoft Active Sync

1. Find the file setup.msi.

2. Right Click and select Install.

Warning: Please always keep the Bar Code Scanner in the charger. If the battery run out, the Bar Code Scanner will not work again.

Step 2-1: Install Software on Bar Code Scanner

After Install Active Sync on Step 1, Then plug the USB cable to the PC.

And ‘Mobile Device’ will appear under My Computer and some folder inside it.

Step 2-2: Install Software on Bar Code Scanner

Copy ‘scanwedge.reg’ to the Mobile Device’s Platform folder as follow.

Then press the power button until the Bar code scanner reboot.

Step 2-3: Install Software on Bar Code Scanner

Connect the Bar Code Scanner to the PC again.

Copy 1.cab, 2.cab, 3.cab and ScanWedge.exe to the ‘Temp’ Folder under the Mobile Device.

Step 2-4: Install Software on Bar Code Scanner

Execute 1.cab, 2.cab and 3.cab on the Bar Code Scanner.

(Remark: Not execute on the PC, Run those files on the Bar Code Scanner)1. Press following button to open the Start Menu

‘F’ - > ‘CTRL’ -> ‘F’ -> ‘ESC’

2. Press up arrow key to select ‘Run…’ and then press ‘ENT’

3. Press ‘F’ -> ‘TAB’ and ‘ENT’

4. Press ‘F’ -> ‘TAB’ and ‘F’ -> ‘TAB’ then use arrow key to select ‘Temp’ and press ‘ENT’

5. Press ‘F’ -> ‘TAB’ and down arrow key to select ‘All Files (*.*)’ and press ‘ENT’6. Press ‘F’ -> ‘TAB’ and use arrow key to select ‘1.cab’ and press ‘ENT’7. Press ‘ENT’

8. Press ‘ENT’

9. Repeat 1. to 8. to install 2.cab and 3.cab

Step 3-1: Create Shortcut

Copy ‘mchht’ shortcut from ‘Mobile Device’-’Windows’-’Programs’

Step 3-2: Create Shortcut

1. Paste the ‘mchht’ files under windows-StartUp.

2. Copy “ScanWedge.exe” under Windows-StartUp.

3. Press the power off button and hold it until the Bar Code Scanner Reboot.