balpure - ballast water filter
TRANSCRIPT
7/23/2019 BALPURE - Ballast Water Filter
http://slidepdf.com/reader/full/balpure-ballast-water-filter 1/2
BALPURE® BALLAST WATER TREATMENT
BALLAST WATER FILTER
A ballast water treatment system cannot be effective without a filter.
In order to remove hard shell organisms, a filter is
required in a ballast water treatment system. A ballast
water treatment system cannot be effective without a
filter. The BALPURE® system features a self-cleaning
ballast water filter that is essential to effectively treat
ballast water.
Severn Trent De Nora has approved multiple filters
for use with the BALPURE system. Following rigorous
engineering and testing, disc filters have been
eliminated from the BALPURE scope of supply and
only screen filters are offered. The BALPURE standard
scope of supply will include a 40-micron self-cleaning
filter for performance and compliance with the IMO D-2
standards.
The most appropriate filter is selected based on the
configuration and constraints of the vessel requiring
ballast water treatment.
- Vertical or horizontal configuration
- Nozzle(s) orientation and size(s)
- Piping configuration
- Available space in the main auxiliary area
7/23/2019 BALPURE - Ballast Water Filter
http://slidepdf.com/reader/full/balpure-ballast-water-filter 2/2
Secondary text zone (type is white)
7 5 0 . 0
0 8 0 . 0
A U
G / 1 1
Severn Trent De Nora
1110 Industrial Blvd.Sugar Land, TX 77478
United States
T: +1 281 240 6770
F: +1 281 240 6762
For more information on the BALPURE® ballast water treatment system
visit www.balpure.com
WE UNDERSTAND
BALLAST WATER TREATMENT
Existing IMO guidelines provide a recommendation for
filtration in order to prevent silt/ sediment accumulation
in ballast tanks. IMO G12 Guideline, paragraph
4.6, recommends installing equipment to remove
suspended matter at the point of uptake. Furthermore,
the discharge of sediments is prohibited.
The BALPURE ballast water filter fully addresses these
issues. The entire ballast water stream is passed
through the ballast water filter to remove and reject
large organisms back to the uptake location and
greatly reduce the accumulation of silt/sediments in
the ballast water tanks.
Filter PlacementFor tankers and carriers with conventional pump
rooms or submersible pumps the filter will be the only
item fitted outside the main and auxiliary machinery
spaces. For these applications the filters would be
fully specified to meet ATEX rules governing the
carriage and transportation of hazardous cargoes. All
BALPURE systems are supplied with a self-cleaning
filter as part of the standard supply.
For bulk carriers, container ships or similar vessels
all equipment will be fitted into the main or auxiliary
machinery spaces.
Filter ComponentsThe internal components of the ballast water filter are
configurable in several options. The most economicalinternal wetted materials are 316 stainless steel.
However, Super Duplex stainless steel is available
as an option to ensure longer lifespan with reduced
maintenance.