ballymore catalog 120612€¦ · · 2013-05-09† built to osha and ansi standards ships...

Non-StraddleBase

Straddle BaseModel # HL-4

Shown with optional 10” x 24” tool tray

w w w. B A L LYMORE . c o mPhone: 610.593.5062 • Fax: 610.593.8615

10 11

TILT & ROLL LADDERS• Balanced design allows ladder to tilt easily and roll effortlessly on two 4” casters• 16” or 24” wide treads• 450 lbs. capacity• Expanded metal standard or specify alternate tread• Ships unassembled in a box• Fully assembled ladders available - specify (SU) set-up• Gray powder coat fi nish• Built to OSHA and ANSI Standards

Straddle BaseModel # HL-4

Shown with optional 10” x 24” tool tray

Ships unassembledin a box

Model # H318TR

Non-StraddleBase

Model # TR-3

FOLD-N-STORE LADDERS• Ladder can be easily folded for storage or

transportation• Tilt and roll mobility• Large 10” rubber wheels roll easily on rough

surfaces• 14” deep top step standard• Expanded metal step tread standard, or specify

alternate tread• 350 lb. capacity• Gray powder coat fi nish• Ships unassembled• Built to OSHA and ANSI standards

TREAD TYPES AVAILABLE:(X) Expanded Metal (P) Perforated (G) Heavy Duty

Serrated Grating

PLEASE SPECIFY WHEN ORDERING

TRTRAVAVAAV(X(X((P(((G(G

PPLPLPLPPWWW

Built to OSHA and ANSI

30 inch handrails

16” Wide Treads

Optional Replaceable Skid Plate for rough

surfaces

Model # FAWL-6

TOPSTEP

OVERALL

TILT & ROLL MODEL #

BASEW” x L”

WEIGHTLbs.

ExtraFeatures

STEPSINCLUDINGTOP STEP

TR-24” Wide Step2 Step3 Step4 Step5 Step6 Step

HL-24” Wide Step2 Step3 Step4 Step5 Step6 Step

16” Wide Step2 Step3 Step4 Step




2030405060

2030405060

19.0 28.5 38.0

19.0 28.5 38.0

40.0 50.0 60.0

40.0 50.0 60.0

5363738393

5363738393

49.0 58.5 68.0

49.0 58.5 68.0

73.0 83.0 93.0

73.0 83.0 93.0

TR-2TR-3TR-4TR-5TR-6

HL-2NSHL-3NSHL-4NSHL-5NSHL-6NS

H218TRH318TRH418TR

H226TRH326TRH426TR

FSTR418FSTR518FSTR618

FSTR426FSTR526FSTR626

30 x 3430 x 4030 x 4630 x 5230 x 58

26 x 3226 x 3826 x 4426 x 5026 x 56

20 x 2420 x 3020 x 36

30 x 2430 x 3030 x 36

20 x 4020 x 4724 x 54

30 x 4030 x 4730 x 54

5060728496

657789

101113

364556

425065

687583

808798

WithTR-20”DTS

WithStraddle

Base

Ships unassembled in box - for

freightsavings14” DTS

Ships unassembled

in box - eligible for

UPS10” DTS

HEIGHT INCHES

• Increase productivity by making maintenance operations simple

• Base frame and rear vertical welment are rugged 2” x 1” rectangular tubing. Rails are sturdy 1” tubular steel.

• Self cleaning slip resistant serrated grating

• Easy to use heavy duty pedal activated lockstep with 4” casters

• 36” high handrails with midrail• Meets OSHA/ANSI requirements• Gray powder coat fi nish• Heavy duty 800 lb. capacity• Ships Unassembled

MOBILE WORK PLATFORMS

3 STEP3 STEP4 STEP4 STEP5 STEP5 STEP6 STEP6 STEP7 STEP7 STEP

30”30”40”40”50”50”60”60”70”70”

24”36”24”36”24”36”24”36”24”36”

SEP3-24SEP3-36SEP4-24SEP4-36SEP5-24SEP5-36SEP6-24SEP6-36SEP7-24SEP7-36

136153151167165182178198193215

33 x 4838 x 4833 x 5438 x 5433 x 6038 x 6033 x 6638 x 6633 x 7338 x 73

151178165193178206193220209237

33 x 6038 x 6033 x 6638 x 6633 x 7238 x 7233 x 7838 x 7833 x 8538 x 85

172202186217199230215245230273

33 x 7238 x 7233 x 7838 x 7833 x 8438 x 8433 x 9038 x 9033 x 9738 x 97

193226207240220253237270251308

33 x 8438 x 8433 x 9038 x 9033 x 9638 x 9633 x 10238 x 10233 x 10838 x 108

STEPS PLATFORMHEIGHT

PLATFORM WIDTH MODEL # WEIGHT BASE

W” x D” WEIGHT BASEW” x D” WEIGHT BASE

W” x D” WEIGHT BASEW” x D”

MODEL WITH HANDRAILS 36” PLATFORM 48” PLATFORM 60” PLATFORM 72” PLATFORM





36” PLATFORM 48” PLATFORM 60” PLATFORM 72” PLATFORM

DOUBLE ENTRY PLATFORMS

3 STEP3 STEP4 STEP4 STEP

30”30”40”40”

24”36”24”36”

SNR3-24SNR3-36SNR4-24SNR4-36

105121121138

33 x 4838 x 4833 x 5438 x 54

127143143160

33 x 6038 x 6033 x 6638 x 66

149150165182

33 x 7238 x 7233 x 7838 x 78

171187187204

33 x 8438 x 8433 x 9038 x 90





MODEL WITHOUT HANDRAILS 36” PLATFORM 48” PLATFORM 60” PLATFORM 72” PLATFORM

SINGLE ENTRY WORK PLATFORMS

Double EntryMOBILE PLATFORM

800 lbs. Capacity

ADD PLATFORM LENGTH TO MODEL #

WHEN ORDERING

WORK PLATFORM DESIGNED TO ACCOMODATE TWO WORKERS.

AVAILABLE IN ALUMINUM AND STAINLESS STEEL. CONTACT FACTORY

FOR PRICING.

3 STEP3 STEP4 STEP4 STEP5 STEP5 STEP6 STEP6 STEP7 STEP7 STEP

30”30”40”40”50”50”60”60”70”70”

24”36”24”36”24”36”24”36”24”36”

DEP3-24DEP3-36DEP4-24DEP4-36DEP5-24DEP5-36DEP6-24DEP6-36DEP7-24DEP7-36

202226227248251270276297300319

33 x 6038 x 6033 x 7338 x 7333 x 8538 x 8533 x 9838 x 98

33 x 11038 x 110

220242245264271292295314319341

33 x 7238 x 7233 x 8538 x 8533 x 9738 x 97

33 x 11038 x 11033 x 12238 x 122

240262285289311314333334339362

33 x 8438 x 8433 x 9738 x 9733 x 10938 x 10933 x 12138 x 12133 x 13438 x 134

260282284306308330332352356380

33 x 9638 x 96

33 x 10838 x 10833 x 12138 x 12133 x 13338 x 13333 x 14638 x 146

5060708090100110120

8393103113123133143153

FAWL-5FAWL-6FAWL-7FAWL-8FAWL-9FAWL-10FAWL-11FAWL-12

30 x 4630 x 5230 x 5830 x 6430 x 7030 x 7630 x 8230 x 88

90100110120135148165175

5 STEP6 STEP7 STEP8 STEP9 STEP10 STEP11 STEP12 STEP

HEIGHTINCHESSTEPS

INCLUDING TOP STEP TOP

STEPOVERALL

MODEL#

BASE W” X L”

WGT Lbs.

500 lb. capacity

Make Uneven Surfaces Level

• Simply turn feet to adjust height• Place several units together to create

larger work areas

• Provide shorter workers with a more comfortable work position

• Heavy duty serrated grating provides excellent slip resistance

• Platforms 24” to 48” long, have 4 legs; longer platforms have 6 legs

• Gray powder coat fi nish

HEIGHTS from 5” to 8” Model # W” x L” Weight Model # W” x L”

AWP5-2424AWP5-2436AWP5-2448AWP5-2459AWP5-2471AWP5-2497

24 x 2424 x 3624 x 4824 x 5924 x 7124 x 97

38526680

106138

AWP9-2424AWP9-2436AWP9-2448AWP9-2459AWP9-2471AWP9-2497

24 x 2424 x 3624 x 4824 x 5924 x 7124 x 97

HEIGHTS from 9” to 14”

ADJUSTABLE HEIGHT STEEL WORK PLATFORM

SNR Series SEP Series

DEP Series

LLLLLLLLLLLLLLLLLLLLL


Turn your fork truck into a personnel lift; Safe, economical access to heights greater than those easily reached by a rolling ladder.• Rugged steel construction• Non-skid platform• 42” high rails with midrails, 4” toeboards and

locking gate• 60” high screen shields operator from fork lift mast• Safety chain secures platform to mast• 2” x 7” fork pockets mounted on 29” centers• 4” swivel casters on base permit easy positioning• Safety orange powder coat fi nish• Ships fl at in a box for easy assembly• Built to ANSI B56.10 standards

1000 lbs capacity

FORK DECK MAINTENANCE PLATFORMModel L” X W” WeightFD-O-CFD-48-CFD-40-48

36” x 36”36” x 48”48” x 40”

135157164

Fluorescent Bulb CaddyTool TrayAll welded available

2614–

OPTIONAL ACCESSORIES

14 15

CANTILEVER SERIESFeatures:• 300 lbs. capacity (higher capacities available - contact factory)• 59 degree slope• Heavy-duty 1” x 2” rectangular tube frame• High quality 5” x 2” locking casters• Available with Rear Guardrail removed

for easy walk through• Powder coat fi nish• Ships KD to prevent freight damage and

lower freight cost

Weight is a combination of the ladder and counter weight, does not include skidding, add 120 lbs for packaging.

NEW! TRUCK/DOCK ACCESS LADDER• Great for accessing trucks or docks• Rugged - base frame and rear vertical are 2” x

1” rectangular tubing• 21” Deep Top Step standard• Heavy duty serrated grating step tread• 10” rear rubber wheels - Great on parking lots or

rough surfaces• Lightweight - lift and roll wheelbarrow portability

• 450 lbs. capacity• Available in both 59° ladder slope or gradual

50° stairway slope• No Rear Guardrail standard for easy walk

through (includes snap chain)• Gray powder coat fi nish• Built to OSHA and ANSI standards

TANK TOP LIFTFEATURES:• Provides easy access to tank trucks, railroad cars or

other cantilevered applications• Great for clearing snow and ice off tops of trailers• Manually propelled for use on hard level surfaces• 48” long cantilevered platform• Hydraulic hand pump raises and lowers platform• Step and deck tread is open serrated grating, while

slip resistant rungs provide access when platform is raised

• Base is 28” wide and 60” long,fi xed outriggers spread 69”

• Full rails on both sides with gates at each end of platform

• Recommended Option: 30” extension railing• Two swivel and two rigid 8” casters for use on hard

surfaces• Two adjustable stabilizing jacks secure lifts to ground• Available with a fi xed platform height• 300 lbs. load capacity• Standard fi nish deep gray enamel paint• Safety orange powder coat also available -

Recommended for outdoor applications

OPTIONAL ACCESSORIES • AC electric power• DC electric power• Air-Hydraulic power• Tool Tray• Fluorescent tube holder• Platform duplex receptacle• Removable 30” extension railing• Safety orange powder coat fi nish

Three available power options:• Convenient plug in 120V

AC with thermal overload protection

• Independent 12V DC deep cycle system complete with battery and charger along with a double solenoid for additional safety

• Air hydraulic power requiring 90 CFM with 90 PSI pressure

Caution: Unless special provisions are made, platforms and lifts must not be used for energized barewire electrical work or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from theimmediate work area. Compliance withunspecifi ed codes should not be assumed.

15251450

TT-913TT-913F

13’ 8”13’ 8”

9’ 4”9’ 4”

48”48”

24”24”

Adjustable 9’ to 13’Non-Adjustable 9’ to 13’

WeightLbs.

Model Number

Platform Max

Height Min

PlatformLength

PlatformWidth

UnderclearanceHeight

SCISSOR LIFTSFEATURES:• Manually propelled – Rated Capacity 1000 lbs./four person• Totally enclosed platform with 42” guardrails, midrails, 4” toeboards and

swing-in gate• Large 3’x 8’ platform with serrated grating deck to assure secure footing• Built-in ladder provides access to platform in fully lowered position• 8” swivel casters for easy rolling and maneuverability• Self-storing outriggers extend from base to provide maximum stability

(optional on lower height models)• Leveling jacks secure unit to fl oor and compensate for uneven surfaces

(standard on fl oor models with raised deck heights above 15’, optional on lower height models)

• Deep gray enamel fi nish• Meets/exceeds ANSI requirements• Platform controls: for operator safety both hands are required to change

elevation• Emergency stops:

- Located on platform for operator use - Emergency stop also located on base for use by ground personnel - Lockable to prevent unauthorized use

7’4” 10’1” 12’10” 15’8” 18’8” 21’4” 24’4” 27’

2’4” 5’ 3’ 5’8” 3’7” 6’4” 4’1” 6’8”

HW1-7 HW1-10 HW2-13 HW2-16* HW3-19* HW3-22** HW4-24** HW4-27**

17001800200021002300240027002800

13’16’19’21’24’2730’33’

WORKING HEIGHT MAX MIN. STABILIZERS SPECIFY

MODEL #WEIGHT

(lbs.)

PLATFORM HEIGHT

NOTREQ’D

STD.EQUIP.

Shown with options: safety orange paint & 30” extension railing

NOTE: All base dimensions are 9 by 4 ft. *Add 20” to 4-ft base width for extended stabilizers ** Add 40” to 4-ft base width for extended stabilizers

6 STEP7 STEP8 STEP9 STEP

10 STEP11 STEP12 STEP13 STEP14 STEP15 STEP

60”70”80”90”

100”110”120”130”140”150”

57”67”77”87”97”

107”117”127”137”147”

24”24”24”24”24”24”24”24”24”24”

CL-6CL-7CL-8CL-9

CL-10CL-11CL-12CL-13CL-14CL-15

468442412405401405409417450458

32 x 4632 x 5232 x 5832 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103

735695640583554544537520528536

32 x 5332 x 5232 x 5832 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103

763773779697668633601609592600

32 x 6032 x 5932 x 5832 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103

791801807811757722690673656664

32 x 6732 x 6632 x 6532 x 6532 x 7132 x 7732 x 8440 x 9040 x 96

40 x 103


VERTICALCLEARANCE




PLATFORM OVERHANG 14” OVERHANG 28” OVERHANG 35” OVERHANG 42” OVERHANG

CANTILEVER LADDERS

MODEL#

TOP STEPHEIGHT

OVERALLHEIGHT

STEPWIDTH

BASEW” x L”

WEIGHTLBS.

TA-5-24TA-5-36

50”50”

80”80”

24”36”

32” x 53”44” x 53”

145170

SW-TA-5-24SW-TA-5-36

50”50”

80”80”

24”36”

32” x 60”44” x 60”

155180

LADDER SLOPE 59°

STAIRWAY LADDER SLOPE 50 DEGREE

ADD PLATFORM OVERHANG LENGTH TO MODEL NUMBER WHEN

ORDERING

OPTIONS/ACCESSORIES:• Cantilevered platform extensions • Special voltage electrical systems

• 120 volt outlet on platform • Safety orange powder coat fi nish

Custom Designs:Available to meet your special access problems - contact factory

for quotation

STANDARD FEATURES:• 120 volt AC power (raise and

lower) with thermal overload protection

OPTIONAL POWER:• 12 volt DC deep cycle system

available with battery and charger

• Air-Hydraulic Drive - recommended for hazardous environments

• CAUTION: - Unless special provisions are

made, platforms and lifts must not be used for energized bare-wire electrical work or operated on inclined surfaces

- When this equipment is used, ground personnel should be excluded from the immediate work area


18 19


MINI SCISSOR LIFTFeatures:• 500 lb capacity• Provides working heights from 16’ to 19’• Maximun raised platform height of 9’ 10”

to 12’ 9”• MSL - 12 includes outriggers• Platforms are both 24” x 46”• 12 volt DC powered for raising and

lowering• Easy to roll on 6” casters• Meets/exceeds ANSI safety standards

CUSTOM VERTICAL ACCESS

MODEL#

WORKING HEIGHT

PLATFORMMAX.

PLATFORMMIN.

FOOTPRINTW”x L”

OVERALL HEIGHT (Lowered)

WEIGHT(Lbs.)

MSL-10MSL-12

16’19’

9’ 10”12’ 9”

26”26”

28” x 46”28” x 46”

70”74”

787917

CALL BALLYMORE FOR ALLYOUR CUSTOM VERTICAL ACCESS REQUIREMENTS

NO JOB TOO BIG OR TOO SMALL

AIRCRAFT MAINTENANCE PLATFORMS

INDUSTRIAL WORK PLATFORMS

INDUSTRIAL CROSSOVERS

Features:• Supplied in three pieces: two stair sections and one bridge• Structural frame and rails are heavy 11/4” schedule 40 pipe• Standard step and bridge tread: expanded metal or serrated grating

(Optional solid steel tread with abrasive mat on bridge is available to avoid debris falling onto conveyors)

• Full rails, midrails and toeboards• Stairway slope allows forward facing descent• Stair sections have 10” step spacing with 9” of horizontal run per step• Each stair section has four legs with large,

pre-drilled plates to bolt to the fl oor• Also available in alternate confi gurations:

U-Shape, Z-Shape, L-Shape, etc.• Gray powder coat fi nish• Rated capacity 800 lbs.• Maximum use of limited fl oor space while complying to OSHA

requirements

283848586878

CS227CS327CS427CS527CS627CS727

253310378445517600


254325393465537630


276351428505583680

2 STEPS3 STEPS4 STEPS5 STEPS6 STEPS7 STEPS

NO. OF STEPS EACH

SECTIONVERTICAL

CLEARANCE INCHES

MODEL# WEIGHT MODEL# WEIGHT MODEL# WEIGHT

27” OVERALL WIDTH(EXPANDED METAL)

311/2” OVERALL WIDTH(SERRATED GRATING)


*Complete model designation includes suffi x from “Bridge Sections” table. (i.e., CS327-CB227).

Stair Sections (Set of 2) for Industrial Crossovers2 to 7 Steps... with choice of widths

1828384858

-CB227-CB327-CB427-CB527-CB627

88111133156195

-CB231-CB331-CB431-CB531-CB631

95120140165203

-CB238-CB338-CB438-CB538-CB638

102128153180220

2030405060

LENGTHIN

INCHESHORIZONTAL CLEARANCE

INCHESMODEL# WEIGHT MODEL# WEIGHT MODEL# WEIGHT

27” OVERALL WIDTH(EXPANDED METAL)



Bridge Sections for Industrial CrossoversCombine any length with appropriate width stair sections

*Complete model designation includes prefi x, indication a pair of stair sections from “Stair Sections” table.

Alternate confi gurations available by quotation.

SHIPS KD FOR REDUCED

SHIPPING COSTS


ballymore catalog 120612€¦ · · 2013-05-09† built to osha and ansi standards ships...

Documents