ball valves - floating small bore · • basic design complied with ansi b16.34 and mss sp-110. •...

www.australianpipelinevalve.com.au

BALL VALVES - FLOATING SMALL BORE

QUALITY VALVE MANUFACTURER

QUALITY COMMITMENT

Quality is Our First Priority.

Consistent product quality and a proven

track record makes Australian Pipeline

Valve a dependable choice for cast

Gate, Globe and Check Valves, where

total reliability is the number one concern.

Since its founding, APV’s philosophy has

been focused on quality. Our valves

are manufactured in full compliance

to worldwide standards (such as ASME,

ANSI, API 6D, API 600, ISO, BS, AS).

70-78 Stanbel Road Salisbury Plain South Australia 5109 Telephone +61 (0)8 8285 0033 Fax +61 (0)8 8285 0044

email: [email protected]

AUSTRAL IAN P I P E L I N E VA LVE 3

Firesafe Certificates 4

1 Piece Body FS900 Series Class 800 7

2 Piece Body FS660 Series 1000 PSI 8

2 Piece Body FS660 Series Class 800 & 900 9

2 Piece Body FS660 Series Class 900 & 1500 10

2 Piece Body FS660 Series 3000 & 6000 PSI 11

2 Piece Body FS660 Series Extended Ends 12

2 Piece Body FS660 Series A72-100-AF26 14

1 Piece Body FS660 Series 10,000 PSI 15

2 Piece Body FS660-SKF Series Oilpatch 2000 - 3000 PSI 16

2 Piece Body 326-FUS Series Oilpatch 2000 - 5000 PSI 17

3 Piece Body BV100 Series Class 800 - 2500 PSI 18

3 Piece Body BV100 Series Class 3000 - 7500 PSI 22

BV100-MS Series - Model KI-L830 - 2000 PSI 24

Double Block & Bleed DB300 Series 26

Deadman Spring Return Ball Valve 28

Part Number System 30

Technical Risk / Liability 31

CONTENTS

© Copyright Australian Pipeline Valve 1990 - 2019 Edition

Catalogues, photos, brochures and technical publications are the exclusive property of Australian Pipeline Valve.Any unauthorised reproduction in total or in part, shall result in prosecution. Products and data sheets in this publication are subjectto change at anytime without notice. Australian Pipeline Valve reserves the right to carry out amendments to products and materials.

AUSTRALIAN PIPELINE VALVE

Australian Pipeline Valve is one of a small number of companies in the world to hold firesafe certification to the latest 5th & 6th edition of API 607 as well as the latest edition of API 6FA.

Fire Test ReportANSI/API Standard 607, 6th Edition, 2010

ISO 10497: 2010Performed for

Australian Pipeline Valve

www.australianpipelinevalve.com.au/

2 inch Class 1500Stainless Steel Floating Ball Valve

Valve Code: BV100-AK3G3AC4M

Project Number: 215067- 1.1ATest Date: July 7, 2015

Performed by

YARMOUTH RESEARCH AND TECHNOLOGY, LLC

434 Walnut Hill RoadNorth Yarmouth, ME 04097 USA

(207) [email protected]

ISO 15848-1:2014Helium Fugitive Emission Test Report

Performed for

Australian Pipeline Valve

www.australianpipelinevalve.com.au/

2 inch Class 800 3-Piece Ball ValveWith APV Torqturn Actuator JC130S

Product Code: BV100-AK3ECAAC1M

Project Number: 215066- 2.31Test Start Date: July 6, 2015

Performed by

YARMOUTH RESEARCH AND TECHNOLOGY, LLC

434 Walnut Hill RoadNorth Yarmouth, ME 04097 USA

(207) [email protected]

AUSTRAL IAN P I P E L I N E VA LVE4

CERTIFICATES

FIRESAFE & FUGITIVE EMISSIONS CERTIFICATES

Form code: 71.07a Revision: 2016-01 www.dnvgl.com Page 1 of 4© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

FOR VALVE

Statement No:N141A59A

Valid for products not subject to DNV GL classification requirements.

Particulars of Product

Product Name: Ball, Butterfly, Gate, Globe, and Plug Valve

Type designation: Ref. to attachement

Application/context: As per witness certificates

ID/Serial/Tag no: N.A.

The product is intended for: Stock/Projects

Requirements are based on: Fugitive Emission ISO 15848-1, ISO 15848-2, ISO 10497-2010, Cycle & Reliability Endurance test, API622- 2nd Edition 2011, Fire safe Tests API 607 6th Edition

Deviations and limitations, if any, are stated on page 2 onwards.

Particulars of Vendor and Purchaser

Vendor: Global Supply Line Pty. Ltd.

Vendor reference:

Purchaser:

Purchaser reference:

Issued at New York on 2016-07-29

for DNV GL

This document has been digitally signed and will therefore not have handwritten signatures

Fu, GuoqiangSurveyor

Except for any liability caused by DNV GL's gross negligence or wilful misconduct, DNV GL's maximum cumulative liability arising out of or related to the use of or reliance on this document shall be limited to USD 300 000.

INSPECTION REPORTDet Norske Veritas

This is to certify that at the request of the Australian Pipeline Valve, 9-15 Boolcunda Road, Salisbury Plain, Australia, the undersigned Surveyor to this Society did attend the Yarmouth Research and Technology facility, North Yarmouth, ME, USA on 8 January, 27-28 January, 27-28 Feburuary, 20 March and 23 July 2015 in order to witness Cycling Endurance Simulated Testing in accordance with ISO 15848-1, Second Edition requirements on the following two (2) valve and Actuator:

3” ANSI Class 150 Model SLFSBV01 C/W JA Series RF Valve Torqturn Actuator

2” ANSI Class 800 Model BV100 C/W JC Series Torqturn Actuator

Attached is the Yarmouth Research and Technology Valve and Actuator Endurance Cycle Test Certificate, dated July 2015 and duly endorsed by the witnessing Surveyor.

For Det Norske Veritas (USA), Inc.

David Reznik

Folder: A0221025 Report: 16-YYYY-2 Date: 02 April 2016

Det Norske Veritas AS, Veritasveien 1, NO-1322 Hovik, Norway, Telephone: +47 67 57 99 00, Telefax: +47 67 57 99 11, Org. No. NO 945 748 931 MVA

Form No.: 40.91a Issue: January 2008


CERTIFICATES



CERTIFICATES


FEATURES• 2000psi CWP.• Single Piece design.• ReinforcedTFEseatsandstuffingboxring.• NACEMR-01-75available.• Compact.• FiresafeCertifiedAPI6075thedition.• ReinforcedTFEseatsincreasedurability.• SeparatingpackingnutandhandlenutensuresNOSTEM LEAKAGEevenwhenthehandleisremoved.• Bellevillewasherassuresleak-freesealoncool-down & as packing wears.• Bottom-loadedblow-outproofstem.• BasicdesigncompliedwithANSIB16.34andMSSSP-110.• NPTthreadedendscompliedwithANSIB1.20.1.• BSPthreadedendscompliedwithBS21.• Graphitegasket&stempackingpreventpost-fire externalleakage.• Post-firemetal-to-metalsealpreventsinternalleakage afterfire.• TestedaccordingtoMSSSP-110/API598.• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedue tothermalcycling.

MATERIALS LIST

OPTIONS-L: Locking Device-M: Tapped Mounting Pad-V: Vented Ball

DIMENSIONSSize øD L A B H W M Weight

in mm in mm in mm in mm in mm in mm in mm (OPTION) (Kg)

1/4” 8 0.36 9.2 2.64 67 0.50 12.7 1.12 28.5 1.81 46 4.33 110 10-24UNC 0.3

3/8” 10 0.36 9.2 2.64 67 0.50 12.7 1.12 28.5 1.81 46 4.33 110 10-24UNC 0.3

1/2” 15 0.36 9.2 2.64 67 0.50 12.7 1.12 28.5 1.81 46 4.37 110 10-24UNC 0.3

3/4” 20 0.49 12.5 2.80 71 0.50 12.7 1.12 28.5 1.97 50 4.37 110 10-24UNC 0.4

1” 25 0.63 16 3.31 84 0.87 22.1 1.37 34.8 2.36 60 5.51 140 10-24UNC 0.7

1-1/4” 32 0.79 20 3.70 94 0.87 22.1 1.37 34.8 2.56 65 5.55 141 10-24UNC 1.1

1-1/2” 40 0.96 24.5 3.94 100 0.93 23.6 1.50 38.1 2.83 72 6.3 160 1/4-20UNC 1.3

2” 50 1.26 32 4.65 118 0.93 23.6 1.50 38.1 3.07 78 6.3 160 1/4-20UNC 2.0

No. Parts Stainless Carbon Steel

1 Body ASTMA351-CF8M/316 ASTMA216-WCB/A105

2 RetainerNut ASTMA351-CF8M/316 ASTMA216-WCB/A108

3 Gasket Graphite Graphite

4 SeatRetainer ASTMA351-CF8M/316 ASTMA216-WCB/A108

5 Ball ASTMA351-CF8M/316 ASTMA351-CF8M/316

6 Seat ReinforcedTFE ReinforcedTFE

7 ThrustWasher PTFE PTFE

8 StemPacking Graphite Graphite

9 Gland AISI304/316 AISI304/316

10 Stem ASTMA276-316 ASTMA276-304

11 BellevilleWasher AISI301 AISI301

12 PackingNut AISI304 AISI304

13 HandleCover PVC PVC

14 Handle AISI304 ZincPlatedSteel

15 HandleNut AISI304 AISI304

16 Anti-StaticDevice AISI304 AISI304

P-T RATINGS

PTFET2500

2000

1500

1000

500

0

-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

172.4

137.9

103.4

68.9

34.4

0.0

T R

WO

RK

ING

PR

ESSU

RE

IN P

SIG

SERVICE TEMPERATURE

WO

RK

ING

PR

ESSU

RE

IN B

AR

R R-PTFE

1/4”-2” 13234

151412

11

9

10

8

7

16

6

5

1

W

A

L

H

ØD

B

Pressure Equalisation Hole


Thiscatalogueisgeneralinit’snatureanddesignandcanvaryatanytime.Thiscatalogueistobeusedasaguideonly.

FS900 SERIES

FS900 UNIBODY CLASS 800 SERIES BALL VALVE

FEATURES• 1000PSICWP• ReinforcedTFEseatsincreasedurability.Adjustablepackinggland.• Bottom-loadedblow-outproofstem.• Low operating torque to reduce automation costs.• OptionalmountingpadcomplieswithISO5211foreaseand interchangeabilityofactuation.• BasicdesigncomplieswithANSIB16.34&MSSSP-110.• NPTthreadedendscomplieswithANSIB1.20.1.• BSPthreadedendscomplieswithBS21.Buttweldendsalsoavailable.• Graphitegasket&stempackingpreventpost-fireexternalleakage.• TestedaccordingtoMSSSP-110/API598.

DIMENSIONS

*For4”refertoseparatedrawing

Buttweld Ends

MATERIALS LISTNo. Parts Stainless Carbon Steel

1 Body ASTMA351CF8M ASTMA216-WCB

2 EndCap ASTMA351CF8M ASTMA216-WCB

3 Seat PTFE/RPTFE PTFE/RPTFE

4 Ball ASTMA351CF8M/316 ASTMA351CF8M/316





9 Gland AISI304 AISI304

10 SpringWasher AISI304 AISI304




14 StopScrew AISI304 AISI304

15 Anti-StaticDevice AISI304 AISI304

Size ØD L I K ØG H W M

in mm mm mm mm mm mm mm mm mm

1/4 8 11.6 54 50 96

3/8 10 12.7 60 50 96

1/2 15 15 63 5 12 36 62 100 M5

3/4 20 20 73 6 13.5 36 68 121 M5

1 25 25.4 85 8 18 42 80 153 M5

1-1/4 32 32 97/102 8 18 42 86 153 M5

1-1/2 40 38 108/115 8 18 50 86 180 M6

2 50 50 124/134 8 18 50 95 180 M6

2-1/2 65 65 163/168 12 29 70 132 265 M8

3 80 80 185/191 12 29 70 143 265 M8

4 100 100 231/260 * * * 180 * *

Optional locking device

OPTIONS-L: Locking Device-V: Vented Ball-P: Equippedwith Pneumatic Actuator-M: Mounting Pad

P-T RATINGS

PTFET

1500

1000

500

0

-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

103.4

68.9

34.4

0.0

T R

WO

RK

ING

PR

ESSU

RE

IN P

SIG

SERVICE TEMPERATURE

WO

RK

ING

PR

ESSU

RE

IN B

AR

R R-PTFE

1⁄4”-4”

1

2

3

4

15

5

6

7

8

9 10 11

12 13

W

14

M

ØA

B

H

ØD

L

OptionalMountPad

Pressure Equalisation Hole Post-firemetal

to metal seal

FS660 SERIES

2 PIECE BODY 1000 PSI FS660 SERIES BALL VALVE




*21/2”to4”seeseparatedrawingandseparatepressure/temperaturechart.*2Mountpadisoptionalanddimensionscanvary.


MATERIALS LIST

Size ØD L ØJ K ØG*2 H W Min mm in mm in mm in mm in mm in mm in mm in mm mm

1/4” 8 0.43 11 2.12/2.32 54/58 0.31 8 0.59 8 2.13 54 4.7 120 M53/8” 10 0.49 12.5 2.36/2.40 58/61 0.31 8 0.59 8 2.13 54 4.7 120 M51/2” 15 0.59 15 2.40/2.52 61/64 0.31 8 0.47 12 1.42 36 2.44 62 3.94 100 M53/4” 20 0.79 20 2.87/3.11 73/79 0.39 10 0.53 13.5 1.42 36 2.68 68 4.76 121 M51” 25 1.00 25.4 3.35/4.53 85/115 0.47 12 0.71 18 1.65 42 3.15 80 6.02 153 M5

1-1/4” 32 1.26 32 3.78/4.49 96/114 0.47 12 0.71 18 1.65 42 3.39 86 6.02 153 M51-1/2” 40 1.50 38 4.29/4.53 109/115 0.55 14 0.71 18 1.97 50 3.39 86 7.09 180 M6

2” x 1-1/2” 50 x 40 1.50 38 0.55 14 0.71 18 1.97 50 3.39 86 7.09 180 M62” 50 1.97 50 5.11/5.28 130/134 0.55 14 0.71 18 1.97 50 3.74 95 7.09 180 M6

2-1/2” 65 2.56 65 6.61/7.28 168/185 0.79 20 1.14 29 2.76 70 5.20 132 10.43 265 M83” x 2-1/2” 80 x 65 2.56 65 7.28/8.66 185/220 1.14 29 7.24 184 13.78 350

3” 80 3.15 80 * * 0.79 20 1.14 29 2.76 70 5.63 143 10.43 265 M84” x 3” 100 x 80 3.5 80 * * 0.79 20 1.14 29 5.63 143 10.43 265

4” 100 3.94 100 9.09/10.24 231/260 0.98 25 1.57 40 6.93 176 11.02 280


1 Body ASTMA351-CF8M/316 ASTMA216-WCB/A105

2 EndCap ASTMA351-CF8M/316 ASTMA216-WCB/A105

3 Seat RPTFE/Delrin RPTFE/Delrin

4 Ball ASTMA351-CF8M/316 ASTMA351-CF8M/316





9 Gland AISI304 AISI304

10 SpringWasher AISI304 AISI304




14 StopScrew AISI304 AISI304

15 Anti-Static AISI304 AISI304

FEATURES• 2000psiCWP(800Class)withRPTFEseats.(Upto50NB)• 2220psiCWP(900Class)withDelrin/RPTFEseats.(Upto50NB)• 1500psiCWP65NBto100NB(sealweldedbody)withDelrinor

RPTFE seat.• ReinforcedTFEseatsincreasedurability.• Adjustablepackinggland.• Bottom-loadedblow-outproofstem.• Low operating torque to reduce automation costs.• OptionalmountingpadcomplieswithISO5211for easeandinterchangeabilityofactuation.• BasicdesigncomplieswithANSIB16.34&MSSSP-110.• NPTthreadedendscomplieswithANSIB1.20.1.• BSPthreadedendscomplieswithBS21.• Graphitegasket&stempackingpreventpost-fireexternalleakage.• TestedaccordingtoMSSSP-110/API598.• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedueto thermalcycling.

DIMENSIONS

1

2

3

4

15

5

6

7

8

9 10 11

12 13

14

W

M

ØA

B

H

ØD

L

OptionalMountPad

Pressure Equalisation Hole Post-firemetal

to metal sealOption:-Sealweldedbodyversionalsoavailable

M

W

OPTIONS-K: Locking Device-V: Vented Ball

Buttweld Ends

P-T RATINGS

2500

2000

1500

1000

500

0

-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

172.4

137.9

103.4

68.9

34.4

0.0

R

WO

RK

ING

PR

ESSU

RE

IN P

SIG

SERVICE TEMPERATURE

WO

RK

ING

PR

ESSU

RE

IN B

AR

R R-PTFE

1⁄4”-2”

D DELRIN

22001⁄4”-2” D R

D R21⁄4”-4”

FS660 SERIES

2 PIECE BODY CLASS 800/900FS660 SERIES BALL VALVE


FEATURES• ANSI900(2200psi)andANSI1500(3700psi)• API3000alsoavailable.• Graphitestempacking.• Blow-out-proof stem design.• RTFE and Devlon seats.• Boltedadjustablepackinggland.• Heavydutyhandles.• Reg.PortandFullPortavailable.• NACEMR-01-75canbesupplied.• FiresafedesignAPI607&API6FA.• LockingKitsavailable• Heavyconstruction.• Enlargedbottom-loadedblow-outproofstem.• SpecialdesignofgasketensuresNOLEAKAGEbetweenbody&cap.• BasicdesigncomplieswithANSIB16.34andMSSSP-110.• NPTthreadedendscomplieswithANSIB1.20.1.• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedueto thermalcycling.

STANDARD EXECUTION• Fire safe.• Threadedends:ANSIB1.20.1-API6A/UNIISO7.1.• ExtendedSocketWeld-Buttweldendsalsoavailable.• Materials:A105/WCB-AISI304/L-AISI316/L.• Gaskets:PTFE,Graphite• Identification:Valvesize-Rating-Material

API 3000 - 3000 PSI WOGMaxWorkingpressure:210bara38ºC-3000psi @100ºFSeatNylon/Delrin

CLASS 1500 - 3700 PSI WOGMaxWorkingpressure:255bara38ºC-3700psi @100ºFSeatNylon/Delrin

Otherspecialmaterialsareavailableforseats:PTFE+316;CarbonGraphite;Vespel,Delrin,PEEKTechnicalinformationuponrequest.

CLASS 900 - 2220 PSI WOGMaxWorkingpressure:153bara38ºC-2220psi @100ºFseatRPTFE/Delrin


No. Description Stainless Steel Carbon Steel

1 Body ASTMA351CF8M ASTMA216WCB

2 BodyCap ASTMA351CF8M ASTMA216WCB

3 Seat Delrin

4 Ball ASTMA351CF8M/316 ASTMA351CF8M/316

5 BodyGasket Graphite

5A* BodyO-Ring* Viton*

6-1ThrustWasher

PTFE

6-2 Graphite

7 Stem ASTMA276316

8 StemPacking Graphite

9 Gland AISI304

10 Handle AISI304

11 SpringWasher AISI304

12 HandleNut AISI304

13 Sleeve VinylPlastisol

14 Anti-StaticDevice AISI304

Size ØD L H WWeights KG

IN DN IN MM IN MM IN MM IN MM

1/2” 15 0.50 12.7 2.72 69.0 2.64 67 4.80 122 0.7

3/4” 20 0.75 19.0 3.48 88.5 2.91 74 5.83 148 1.1

1” 25 1.00 25.4 4.02 102.0 3.15 806.61 168

1.7

11/4” 32 1.26 32.0 4.55 115.5 3.39 86 2.4

11/2” 40 1.50 38.0 4.88 124.0 4.76 12110.23 260

3.8

2” 50 1.75 44.5 5.87 149.0 4.96 125 5.9

MATERIALS LIST

DIMENSIONS*Required on 1500 class and API 3000 D

DD

DELRIND4000

3000

2000

1000

0

-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

275.8

206.8

137.9

68.9

0.0

1⁄2”-2”

21⁄2”

3”

1

2

3

4

14

5

6

7

8 9 11 12

10 13

W

H

L

ØD

5A*

FS660 SERIES

2 PIECE BODY CLASS 900 & 1500 FS660 SERIES BALL VALVE


DIMENSIONS

Otherspecialmaterialsareavailableforseats:PTFE+316;CarbonGraphite;Vespel,Delrin,PEEKTechnicalinformationuponrequest.FEATURES

• TwoPieceBodyScrewedEnds• InvestmentCastBody• BlowOutProofStem/FloatingBall• Fire-SafeAPI6075thEdition,API6FA3rdEdition• AdjustablePackingGland• Standard Locking Handle• Actuator Mounting Pad• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamageduetothermalcycling

• ThreadsconformtoANSIB1.20.1,BS21,DIN259/2999• Mount Pad

CLASS 2500 - 6000 PSI WOGMaxWorkingpressure:413bar@38ºC-6000psi@100ºFSeatNylon/Delrin

API 3000 - 3000 PSI WOGMaxWorkingpressure:207bar@38ºC-3000psi@100ºFSeatNylon/Delrin

No. Part Name Stainless Steel Carbon Steel1 Body ASTMA351CF8M ASTMA216WCB

2 BodyCap ASTMA351CF8M ASTMA216WCB

3 Seat Delrin

4 Ball ASTMA351CF8M

5-1ThrustWasher

PTFE

5-2 Graphite

6 BodyGasket Graphite

6A BodyO-Ring Viton*

7 Stem ASTMA276316

8 StemPacking Graphite

9 Gland AISI304

*10 GlandPacking PTFE

11 SpringWasher AISI304

12 HandleNut AISI304

13 Handle AISI304

14 Sleeve VinylPlastisol

15 Anti-StaticDevice AISI304

Size ØD L H WISO 5211 M

IN DN IN MM IN MM IN MM IN MM1/4” 8 0.25 6.4 3.00 76.2

1.92 48.8 5.00 127.0 F033xM5

3/8” 10 0.50 12.7 4.00 101.61/2” 15 0.50 12.7 4.00 101.63/4” 20 0.75 19.1 4.25 108.0 2.56 65.0 5.83 148.1 F041” 25 1.00 25.4 4.5 114.3 3.45 87.6 8.10 205.7 F05 3xM6

11/4” 321.50 38.1

5.25 133.44.13 104.9 10.00 254.0 F07 3xM811/2” 40

2” 50 6.25 158.8

MATERIALS LIST


Test Pressure 8NB - 50NB (1/4” ~ 2”)

ShellTest 9000PSI

HPCTest 6600PSI

LPCTest 80-100PSI

10

7

6

5

15

4

3

2

1

9 11 12 13 14

8

W

M

H

ØD

L


6A

FS660 SERIES

2 PIECE BODY CLASS 3000 & 6000 PSIFS660 SERIES BALL VALVE

D

P-T RATINGS

7000

6000

4500

3000

1500

0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

482.7

413.7

310.3

206.8

103.4

0.0

WO

RK

ING

PR

ESSU

RE

IN P

SIG

SERVICE TEMPERATURE

WO

RK

ING

PR

ESSU

RE

IN B

AR

1⁄4”-2”

NYLONN

N1⁄4”-2”

DELRIND

DIMENSIONS (MM)

•RefertononextendedFS660datasheetformainvalvespecification•Class800,1500,2500•DesignandManufactureperANSIB16.34,BS5351,API608•ThreadperANSIB1.20.1•SocketperANSIB16.11•TestandInspectionperAPI598

Integralorweld-onextendedends

FIRESAFE CERTIFIED API 607 5TH EDITION AND API 6FA 3RD EDITION

*Optionalpuplengthsavailableaspermanufacturingdrawing

Size 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2”

ØD 6 10 15 20 25 32 40 50

L1*

L2 170 170 170 176 196 210 226 262

H 60 60 70 80 90 100 115 120

W 135 135 135 180 180 220 220 275

Weight (Kg) 0.9 8/9 1-1/9 1-3/5 2-2/7 3 5 7

W

L

L1/L2

H

ØD



FS660 SERIES

2 PIECE BODY EXTENDED ENDS FS660 SERIES BALL VALVE

ThreadedANSI B1.20.1 or BSP

Socket WeldANSI B16.11

IntegralButt Weld

sch. 40 sch. 80to ANSI B16.25

Socket with nippleintegral or weld-on

available

L2

H

W

V

S

37°30”

L2 Normal extended ends patternL1 Special extra long pattern

W

H

TYPESOCKETWELD

TYPE THREADED

TYPEPLAIN

TYPEBUTTWELD



FS660 SERIES

FS660 SERIES EXTENDED ENDS

END CONNECTION TYPES


DIMENSIONS

* The Cv factor is the gallons of water per minute that the valve will pass with 1 PSI pressure drop. 2 1⁄2” & 3” 3000 psi also available.

Size ØD L H W XCv*

INCH MM INCH MM INCH MM INCH MM INCH MM INCH MM

1/4” 8

0.50 12.7 2.72 69.0 2.64 67.0 4.80 122.0 1.61 41.03/8” 10

1/2” 15 16

3/4” 20 0.75 19.0 33.48 88.5 2.91 74.0 5.83 148.0 1.81 46.0 33

1” 25 1.00 25.40 4.02 102.0 3.15 80.06.61 168.0

47

1-1/4” 32 1.26 32.00 4.55 115.5 3.39 86.0 81

1-1/2” 40 1.50 38.00 4.88 124.0 4.76 121.010.23 260.0

105

2” 50 1.75 44.50 5.87 149.0 4.96 126.0 275

FEATURES• 3,000PSIcold,Non-shock• Proven Design• FullPort(2”sizeisfullporttoschedule160)• NylonorDelrinseats,PTFEorgraphiteseals• Heavydutyhandle• Stainlessballandstem• 2piecebody• Ball includes Pressure Equalisation Hole to prevent trapped pressureinbodycavitywhichpreventsseatdamagedueto thermalcycling.• ThreadedendsNPTANSIB1.20.1-API6A

OPTIONS• Padlocking device• Steam trim• BSPTBS21/ISO7-1ends

12

11

9

8

7

6

5

4

3

2

1

10 13

12

11

9

8

7

6

5

4

3

2

1

10 13

1/4” ~ 3/4” 1” ~ 2”


FS660 SERIES

2 PIECE BODY 3000 PSI BALL VALVE FS660 SERIES - (FS660-72) - PN# A72-100-AF26

MATERIAL LISTNo. Parts Stainless Steel Carbon Steel

1 Body ASTMA351-CF8M ASTMA216-WCB/A108

2 EndCap ASTMA351-CF8M ASTMA216-WCCB/A108

3 Seat NYLON/DELRIN NYLON/DELRIN

4 Ball ASTMA351-CF8M/316 ASTMA351-CF8/304

5 Gasket PTFE PTFE



8 StemPacking PTFE/GRAPHITE PTFE/GRAPHITE

9 BellevilleWasher AISI301 AISI301

10 Handle AISI304 ZINCPLATEDSTEEL

11 HandleWasher AISI304 AISI304

12 Anti-VibrationNut AISI304 AISI301


P-T RATINGS

WO

RK

ING

PR

ESSU

RE

IN P

SIG

WO

RK

ING

PR

ESSU

RE

IN B

AR

NYLONN4500

3000

1500

0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

310.3

206.8

103.4

0.0

SERVICE TEMPERATURE

1⁄4”-2” D

DELRIND

N

Size ØD L H W

IN DN IN DN IN DN IN DN IN DN

1/2” 15 0.50 12.7 4.02 102 2.36 60 5.04 128

3/4” 20 0.75 19.1 4.25 108 2.68 68 5.91 150

1” 25 1.00 25.4 4.49 114 3.15 80 7.09 180

FEATURES

• Size Range DN15~25 (1/2”~1”)

• Pressure Rating 10,000 PSI

• End ConnectionFemale pipe thread to NPT, DIN259/2999 or BSPT/BS21/ISO 7-1

• Temperature Range -20°F to 428°F (-29°C to 220°C) with PEEK seats

No. Description Stainless Steel Carbon Steel Qty.

1 Body ASTMA276316 ASTMA108 1

2 BodyCap ASTMA276316 ASTMA108 1

3 Seat PEEK 2

4 Ball ASTMA351CF8M 1

5 BodyGasket PTFE 1

6 ThrustWasher PTFE 1

7 Stem ASTMA276316 1

8 StemPacking PTFE+Carbon 1

9 Gland AISI304 1

10 GlandPacking PTFE 1

11 SpringWasher AISI304 1

12 HandleNut AISI304 1

13 Handle AISI304 1

14 Sleeve VinylPlastisol 1

15 Anti-StaticDevice AISI316 1

16 BodyCapO-Ring Viton 1

17 StopPin AISI304 1

MATERIAL LIST

DIMENSIONS

17

8 10 9 11 12 13 14

7

6

5

16

15

4

3

2

1

W

H

ØD

L


FS660 SERIES

HEAVY DUTY FULL PORT BALL VALVE10,000 PSI - FS660 SERIES - (FS660-2H-D-E)

StyleS-KF

FEATURES• API 2000 to API 3000• Proven rugged design• Firesafe design• Emergency grease injection facility to stem

13

12

5

9

11

3

1

6

2

4

10

8

11



FS660 SERIES

OILPATCH BALL VALVE 2000 TO 3000 PSI FS660 (FS660-SKF)

PARTS LIST & MATERIALSIndex Description Carbon Steel All SS

1 Body CarbonSteel 316SS

2 Adaptor CarbonSteel 316SS

3 Ball 316StainlessSteel

4 Stem 316StainlessSteel

5 StemBearing Nylon

6 BodySeal Viton

7 Seat NylonorPEEK

Index Description Carbon Steel All SS

8 StemSeal Viton

9 StopScrew Steel 316SS

10 ThrustBearing Teflon

11 Handle/Sq.Nut DuctileIron

12 StopPlate Steel+ZP 316SS

13 Retainer SpringSteel 316SS

Item PartsMaterial

QtyPC-NV PCH-NV PCS-NV PCL-NB

1 Body A216-WCB A351-CF8M A352-LCC 1

2 EndCaps A216-WCB A351-CF8M A352-LCC 1

3 Seats NylonMOS2 2

4 Ball A276-316 A276-316 1

5 Stem A276-316 A276-316 1

6 BodyO-Ring Viton NBR 1

7 Gasket PTFE PTFE 1

8 StemO-Ring Viton NBR 2

9 ThrustBearing PTFE PTFE 1

10 StopPlate Steel Steel 1

11 SnagRing Steel Steel 1

12 Handle A216-WCB A216-WCB 1

13 StopScrew Steel Steel 1

14 HandleBolt Steel Steel 1

15 PlasticCover Vinyl Vinyl 1

*3000PSIBrown

Size E F G H I J

- inch mm inch mm inch mm inch mm inch mm inch mm inch

2A 1”x 1” 43.3 1.703 19.9 0.783 15.88 0.625 9.5 0.374 30.5 1.201 10.5 0.413

2K 1-1/2”x1-1/2” 66.5 2.618 26.1 1.028 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413

2B 2”x1-1/2” 66.5 2.618 26.1 1.028 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413

2C 2”x2” 77.8 3.063 26 1.024 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413

2D 3”x2” 77.8 3.063 26 1.024 22.2 0.874 14.3 0.563 43 1.693 10.5 0.413

2L 2-1/2”x2-1/2” 93 3.661 25.4 1 22.2 0.874 14.3 0.563 54 2.126 10.5 0.413

2E 3”x3” 101.6 4 34.9 1.374 31.7 1.248 15.8 0.622 54 2.126 10.5 0.413

2F 4”x3” 101.6 4 34.9 1.374 31.7 1.248 15.8 0.622 54 2.268 10.5 0.413

2M 4”x4” 125 4.921 34.3 1.35 34.8 1.37 18.9 0.744 54 2.126 10.5 0.413

DIMENSIONSPressure Rating (PSI)

Material WCB LCC SS

Colour Red Brown Black -

Size inch PC-NV PCH-NV PCL-NB PCS-NV

2A 1”x 1” 2500 3000 2500 -

2K 1-1/2”x1-1/2” 2500 - - -

2B 2”x1-1/2” 2500 3000 2500 3000

2C 2”x2” 2160 3000 2160 3000

2D 3”x2” 2160 - 2160 -

2L 2-1/2”x2-1/2” 2160 * - -

2E 3”x3” 1500 * 1500 -

2F 4”x3” 1500 - 1500 -

2M 4”x4” 750 - - -

* 21⁄2”, 3” 3000psi refer FS660.

TOP VIEW

PC-NVPCH-NVPCS-NVPCL-NB

14

13

78

9

1112

1 4

B

365

10

D

15

C

A

2

J

I

G

H

F

E

Size A (NB) B C D

- inch mm inch mm inch mm inch mm inch

2A 1”x 1” 25.4 1 101.6 4 79.7 3.14 160 6.3

2K 1-1/2”x1-1/2” 38.1 1.5 139.7 5.5 140.8 5.54 216 8.5

2B 2”x1-1/2” 38.1 1.5 139.7 5.5 140.8 5.54 216 8.5

2C† 2”x2” 50.8 2 152.4 6 152.1 5.9 216 8.5

2D 3”x2” 50.8 2 209.4 8.25 152.1 5.9 216 8.5

2L 2-1/2”x2-1/2” 65 2.56 177.8 7 167.5 6.59 381 15

2E 3”x3” 76.2 3 222.3 8.75 1.75 6.89 381 15

2F 4”x3” 76.2 3 222.3 8.75 1.75 6.89 381 15

2M 4”x4” 103.5 4.07 238.2 9.38 200.5 7.89 460 18.11

†Red(2160PSI)

Size C D

2C(Brown)* mm inch mm inch

2”x2” 150.7 5.93 381 15

Size d L B H HI E

1” FP 25 98 43 51 99 180

1-1/2” FP 38 133 65 83 115 200

2” RP 38 140 65 83 115 200

2” FP 50 146 78 92 124 280

DIMENSIONS:

No. PartsMaterial Standard

Material (NACE)Qty.

2000 WOG 5000* WOG

1 Body A216WCB A216WCB A216WCB 1

2 Cap A216WCB A216WCB A216WCB 1

3 Stem CarbonSteelZincPlated A311-79ClassB

A479-316 A479-316 1

4 LockingStopper C/S C/S C/S 1

5 LockingPlate C/S C/S C/S 1

6 Washer RPTFE RPTFE RPTFE 1

7 StemThrustWasher RPTFE RPTFE MOLON 1

8 Ball AISI1018Nickel ChromePlated

A351CF8M A351CF8M 1

9 Seat RPTFE RPTFE MOLON 2

10 O-Ring BUNA VITON VITON 1

11 Gasket Graphite Graphite Graphite 1



14 Handle C/S C/S C/S 1

15 Washer C/S C/S C/S 1

16 Bolt C/S C/S C/S 1

17 CapScrew C/S C/S C/S 1

18 CapScrew A193B7 A193B7M A193B7M 6

19 Ball 304 304 304 1

20 Spring 304 304 304 1

MATERIALS LIST:

*3000WOGinlargersizes.ConsultAPV.

*Largersizesareratedatlowerpressures.ConsultAPV.

*

*

Casing Ball Valve4.5”, 5.5”, 7”Refer to drawing.



326-FUS SERIES

OILPATCH BALL VALVE 2000 TO 5000 PSI326-FUS SERIES

FEATURES• 2 Piece, Full Port and Reduced Port • Bolted Construction •Blowout-ProofStemwithO-Ring •Anti-Static •ConformstoASMEB16.34 •NACEMR0175 • Fire Safe Design • Balon®Style

FEATURES• Screwedend,socketweldend,buttweldend, flangedendoranycombinationavailable.

• FiresafetoAPI6075theditionandAPI6FA.•DesigntoANSIB16.34/BS5351(dualconforming)• Class150to2500andAPI3000• Threepiece,enclosedboltdesign• Investmentcastorforged.• Anti-blowoutstem.• Fullboreforminimumpressuredrop.• Adjustablepackingnuttocompensatefortensionloss.• Lockinghandle(onrequest).•AntistaticdesigntoBS5351.• TestingtoAPI598.• ActuatormountingpadtoISO5211(asoption).• Vacuumservice(PTFESeat)downto 20microns(133pascals).

ØB

CØA

37.5°

BUTT WELD SOCKET WELD

P-T RATINGS

13

206

18789

101711 12

BUTTWELD(L1) SOCKETWELD

ØB

CØA

37.5°

BUTT WELD SOCKET WELD

P-T RATINGS

13

206

18789

101711 12

No. Parts Specification

1 Body A351-CF8M/316 A216-WCB/A105 A351-CN7M/A20 A352-LCB/LF2

2 EndCap A351-CF8M/316 A216-WCB/A105 A351-CN7M/A20 A352-LCB/LF2

3 Ball A276-316 A276-316 B437-A20 B437-A20

4 Seat RTFE/Delrin RTFE/Delrin RTFE/Delrin RTFE/Delrin

5 Gaskets PTFE/Graphite PTFE/Graphite PTFE/Graphite PTFE/Graphite

6 ThrustWasher PTFE/Graphite PTFE/Graphite PTFE/Graphite PTFE/Graphite

7 StemPacking PTFE/Graphite PTFE/Graphite PTFE/Graphite PTFE/Graphite

8 PackingGland 316 304 A20 A20

9 BellevilleWasher 301SS 301SS 301SS 301SS

10 Stem A276-316 A276-316 B437-A20 B437-A20

11 GlandNut SS304 SS304 SS304 SS304

12 SpringWasher 301SS 301SS A20 301SS

13 StemNut SS304 SS304 A20 SS304

14 Bolt A193Gr.B8M A194Gr.B7 A193Gr.B8 A320Gr.L7

15 Handle SS SS/Galv SS SS/Galv

16 Cover Plastic Plastic Plastic Plastic

17 StopWasher 304SS 304SS A20 304SS

18 StemO-Ring PTFE/Viton Viton PTFE Viton

19 StopPin 304SS 304SS A20 304SS

20 Anti-StaticDevice 304SS 304SS A20 304SS

BILL OF MATERIALS - 800 CLASS ONLY

14

19

15 16

5

4

3

2

1


131211

17

10

9

8

7

18

6

20

Back Seated Stem Metal Sealing Surface

Backseat Face

Body

50NB


BV100 SERIES

3 PIECE BODY CLASS 800 TO 2500 BALL VALVEBV100 SERIES


Nosafetyfactorisincluded.Whenconditionsbelowapply,thencalculatetorqueusingthefollowingapplicationfactors:

FREQUENCY OF OPERATION SERVICE CONDITIONSLessthanonceperweek +25% Lightslurrysemisolids +40%Lessthanoncepermonth +40% Heavyslurryandsomesolids +75%Lessthanonceperyear +60% Temperature- Minus40ºCtominus20ºC +75% Minus20ºCto0ºC +25% Over150ºC +40%

BREAK TORQUE VALVES (NM) - REINFORCED PTFE SEATS 800 CLASSValve

Size mmLine Pressure - Mpa Maximum Stem

Torque (Nm)1 2 3 4 5 7 9 10.3 13.88, 10, 15 13 14 15 16 17 17 18 18 20 35

20 19 20 21 22 23 24 25 26 29 4525 25 26 27 28 29 33 34 35 37 7532 28 29 29 30 32 35 37 38 40 8540 36 38 38 40 41 46 46 48 50 9050 45 45 45 46 48 51 51 52 55 25065 50 57 67 80 82 39080 110 130 144 148 154 390100 140 160 190 210 230

150PSIsaturatedsteam.CarbonPTFEandPEEKseatsalsoavailableforhighertemperatures.

P-T RATINGS UP TO 2500 CLASS

NYLONN6000

4000

3000

2000

1000

0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

413.4

275.8

206.8

137.9

68.9

0.0

WO

RK

ING

PR

ESSU

RE

IN P

SIG

SERVICE TEMPERATURE

WO

RK

ING

PR

ESSU

RE

IN B

AR

D DELRIN

1⁄4”-2”

1⁄4”-2”1⁄4”-2”

D

DN

P-T RATINGS UP TO 800 CLASS

PTFET2500

2000

1500

1000

500

0-38 0 100 200 300 400 500°F(-34) (-18) (38) (93) (149) (204) (260°C)

172.4

137.9

103.4

68.9

34.4

0.0

WO

RK

ING

PR

ESSU

RE

IN P

SIG

SERVICE TEMPERATURE

WO

RK

ING

PR

ESSU

RE

IN B

AR

1⁄4”-2”

R R-PTFE N NYLON

21⁄2”-3”

4”

T

N

R

R

2500 Class

DIMENSIONS (MM) 800 CLASS FULL PORT*

Dimensionsareindicativeonlyandvaryaccordingtobodystyle.Refertoactualdrawing.ForReducedportallsizesrefertoseparatedrawings.

Size ØD L H W ØA ØB C WeightsN DN IN MM IN MM IN MM IN MM IN MM IN MM IN MM KG

1/4” 80.43 11.0 2.55 65.0

2.75 70.0 5.51 140.00.54 13.8 0.56 14.2

0.39 10.01.1

3/8” 10 0.68 17.3 0.69 17.6 1.11/2” 15 0.55 14.0 2.95 75.0 0.85 21.7 0.86 21.8 0.51 13.0 1.13/4” 20 0.80 20.5 3.14 80.0 3.54 90.0

7.08 180.01.07 27.2 1.07 27.2

0.59 15.01.6

1” 25 0.98 25.0 3.54 90.0 3.93 100.0 1.34 34.0 1.33 33.9 2.211/4” 32 1.24 31.5 4.33 110.0 4.40 112.0

8.46 215.01.68 42.7 1.68 42.7 3.3

11/2” 40 1.45 37.0 4.72 120.0 4.52 115.0 1.91 48.6 1.92 48.8 0.63 16.0 4.62” 50 1.96 50.0 5.51 140.0 5.23 133.0 2.38 60.5 2.41 61.2 0.67 17.0 7.3

2 1/2” 65 2.56 65.0 7.28 185.0 6.81 173.0 18.11 460 3.00 76.3 2.91 73.9 0.67 17.0 13.43” 80 3.15 80.0 8.07 205.0 7.24 184.0 18.11 460 3.51 89.1 3.54 89.8 0.67 17.0 21.04” 100 3.94 100.0 9.44 240.0 9.53 242.0 23.62 600 4.50 114.3 4.54 115.2 0.79 20.0 34.4

CF8M 800 Class 65NB ~ 100NB

Size in. Cv FactorGPM

8NB (1/4) 10

10NB (3/8) 10

15NB (1/2) 12

20NB (3/4) 35

25NB (1) 68

32NB (1-1/4) 105

40NB (1-1/2) 150

50NB (2) 290

CV FULL PORT 800 CLASS



BV100 SERIES

BV100 SERIES

Size (in) 2-1/2x2” 2-1/2” 3x2” 3” 4x3” 4” 6x4”

Size (mm) 65x50 65 80x50 80 100x80 100 150x100*

A 50 65 50 76 76 102 102

D 119 150 119 163 163 187 187

E 270 380 270 380 380 470 470

L (RF) 330 330 356 356 432 432 559

L (BW) 330 330 356 356 432 432 559

L (RTJ) 333 333 359 359 435 435 562

Weight (kg) 27 28 33 38 75 78 150

Torque (Nm) breakaway 125 140 125 195 195 350 350

Size (in) 1/2” 3/4x1/2” 3/4” 1x3/4” 1” 1-1/4x1” 1-1/4” 1-1/2x1/4” 1-1/2” 2x1-1/2” 2”

Size (mm) 15 20x15 20 25x20 25 32x25 32 40x32 40 50x40 50

A 15 15 19 19 25 25 32 32 38 38 50

D 82 82 87 87 92 92 105 105 108 108 119

E 145 145 170 170 170 170 270 270 270 270 270

L (RF) 216 229 229 254 254 279 279 305 305 368 368

L (BW) 216 229 229 254 254 279 279 305 305 368 368

L (RTJ) 216 229 229 254 254 279 279 305 305 371 371

Weight (kg) 10 11 14 15 17 19 23 25 28 30 34

Torque (Nm) 900* 21 21 33 33 68 68 90 90 135 135 139

Torque (Nm) 1500* 35 35 42 42 120 120 250 250 305 305 390

DIMENSIONS - ANSI-600LB

DIMENSIONS - ANSI-600LB

DIMENSIONS - ANSI-900/1500LB

Forged 3 Piece 600~2500LB

*150x 111mmstandardborealsoavailable.Refertodrawing.

2500lbRefertodrawing.AlsoseeBVF100-F26(SpecialServiceBallValves)forfloating 1500NB900/1500lb.AlsoseemodelBV1003piece.

L

E

D

ØA

(RF/BW/RTJ)

Flanged 2 Piece 600 to 2500LB

BV100 SERIES

BV100 SERIES



Size (in) 1/2” 3/4x1/2” 3/4” 1x3/4” 1” 1-1/4x1” 1-1/4” 1-1/2x1/4” 1-1/2” 2x1-1/2” 2”

Size (mm) 15 20x15 20 25x20 25 32x25 32 40x32 40 50x40 50

A 15 15 19 19 25 25 32 32 38 38 50

D 82 82 87 87 92 92 105 105 108 108 119

E 145 145 170 170 170 170 270 270 270 270 270

L (RF) 165 190.5 190.5 216 229 229 241 241 292 292 292

L (BW) 165 190.5 190.5 216 216 229 229 241 241 292 292

L (RTJ) 163.5 190.5 190.5 216 216 229 229 241 241 295 295

Weight (kg) 5 7 7 9 10 14 15 17 18 20 22

Torque (Nm) breakaway 18 18 21 21 45 45 80 80 91 91 125

Flanged 2 Piece 600 to 2500LB

EXTENDED END TYPES(Fully Integral or Weld on)

TYPESOCKETWELD

TYPE THREADED

TYPEPLAIN

TYPEBUTTWELD

ThreadedNPT ANSI B1.20.1 or BSP

Socket WeldANSI B16.11

Butt Weldto ANSI B16.25

Integral

Socket with nipple weld-on or

Integral style

W

H

L

ØB

C

D

37°30”

INTEGRAL FLANGED (150 to 2500 Class)

NPT/SW/BW (Short / Standard Ends)

BV100 SERIES

BV100 SERIES - END CONNECTIONS





1 Body CF8M/316 A105/WCB

2 EndCap CF8M/316 A105/WCB

3a Gasket PTFE/TFM/Graphite PTFE/TFM/Graphite

3b SecondaryGasket TFM/PTFE TFM/PTFE

4 BallSeat PEEK/Delrin PEEK/Delrin

5 Ball StainlessSteel316 StainlessSteel316

6 Stem SS17-4PH SS17-4PH

7 ThrustWasher PEEK PEEK

8 StemPacking PTFE/TFM/Graphite PTFE/TFM/Graphite

9 PackingProtector PEEK PEEK

10 GlandHousing SS304 SS304

11 DiscWasher SS301 SS301

12 NutStop SS304 SS304

13 StemNut SS304 SS304

14 Handle SS304 SS304

15 HandleNut SS304 SS304

16 StopPin SS304 SS304

17 Bolts A193Gr.B8/BM A193Gr.B7

Size A B C D E F G H L Mount Pad* SW BW (S80)

in mm mm mm mm mm mm mm mm mm mm mm mm mm S T OD ID

1/4” 8 11 20.6 27 74 175 6.3 3/8 45 66 - - M5 14.2 11.1 13.8 7.8

3/8” 10 12.5 20.6 27 74 175 6.3 3/8 45 66 - - M5 17.5 11.1 17.2 10.2

1/2” 15 15 25.6 32 79 175 6.3 3/8 48 71 13 27 M5 21.8 12.7 21.4 13.8

3/4” 20 20 32 38 94 200 8.0 M12 63 92 19 30 M5 27.1 13.0 26.7 18.9

1” 25 25 41 43 99 250 9.7 M14 69 106 23 42 M5 33.8 13.0 33.4 24.3

1-1/2” 40 38 56 55 145 290 9.7 M18 82 140 40 58 M6 48.6 16.0 48.5 38.0

2” 50 50 72 76 189 350 12.0 M20 145 165 50 90 M10 61.1 16.0 60.5 48.9

TheBV100Series(7500PSIVersion)valvestructureandwallthicknessconformstoASMEB16.34standard.

TheBV100-7500Seriesisfullboreinallsizesandisalso availablewithaV-ballslotin15°,60°or90°fordifferentflowrate requirements.

SPECIFICATIONS• Class range: ANSI3000Class:-7500psi8NB~25NB(1/4”to1”) ANSI2500Class:-6000psi32NB~50NB(1-1/4”to2”)• Adjustablestempacking• Blow-out proof stem packing• Endconnections:Threaded,Socketweld, Buttweld,ExtendedSW,BW• ISOMounting• Full Port

OPTIONS• Firesafe• Springhandle(deadmanhandle)• Ovalhandle• Locking device• V-Ball for control Valve• Cryogenicoption• PTFE / PFA coating• SpecialAlloy-HastelloyC276/ Superduplex/Alloy20/Monel400 BILL OF MATERIALS

DIMENSIONS (mm)

*Optional


Butt Weld Socket Weld

BV100 SERIES

3 PIECE BODY 7500 PSI BALL VALVEBV100 SERIES


10,000 PSI trunnion version available in metal or soft seats.

10

9

8

7

6

5

4

3b

2

1

11 12 13 14 15

17

3a

L

B

E

H

C

D

ØA

PRESSURE TEMPERATURE

-50 0 100 200 300 400 500

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

5500

6000

6500

DELRIN 1/4” ~ 2” PEEK 1/4” ~ 1” PEEK 1-1/2” & 2”

PRES

SUR

E (P

.S.I.

)

TEMPERATURE (°F)

Size A *Mount Pad SW BW(S80) BW(S160)

in mm SCH80 SCH160 J K M S T OD ID OD ID

1/4” 8 9.0 6.5 - - M5 14.2 11.1 13.8 7.8 - -

3/8” 10 12.5 9.0 - - M5 17.5 11.1 17.2 10.2 - -

1/2” 15 16.0 11.5 13 27 M5 21.8 12.7 21.4 13.8 21.4 11.8

3/4” 20 21.0 15.5 19 30 M5 27.1 13.0 26.7 18.9 26.7 15.6

1” 25 25.5 20.5 23 42 M5 33.8 13.0 33.4 24.3 33.4 20.8

1-1/2” 38 41.0 34.0 40 58 M6 48.6 16.0 48.5 38.0 48.5 34.0

2” 50 52.5 43.5 50 90 M10 61.1 16.0 60.5 48.9 60.5 42.8

DIMENSIONS (MM) INTEGRAL EXTENDED WELDING ENDS

*Optional

16

17

4

5

3a

3b

2

1

151413121110

9

8

7

6

ME

D

C

L

B

H

O.D I.D

1.6

37.5˚

ØA

ØS

J

O.D

Locked Open Locked Closed


BV100 SERIES

BV100 SERIES - 7500 PSI

Item Description Stainless Steel Carbon Steel Q’ty

1 Body ASTMA351CF8M ASTMA216WCB 1

2 BodyCap ASTMA351CF8M ASTMA216WCB 2

3 Ball ASTMA351CF8M/316(Hardened/Coatings) ASTMA351CF8M/316(Hardened/Coatings) 1

4 Seat ASTMA276316(Hardened/Coatings) ASTMA276316(Hardened/Coatings) 2

5 SeatGasket Graphite Graphite 2

6 SeatPacking AISI304 AISI304 2

7 SeatSpringJISG3565SWOCV-V/ASTMA276304ASTMB637InconelX-750

JISG3565SWOCV-V/ASTMA276304/ASTMB637InconelX-750

8-16

8 BodyGasketPTFE PTFE 2

Graphite Graphite 2

9 ThrustWasherPTFE PTFE 1

Graphite Graphite 1

10 StemPacking Graphite Graphite 1

11 Gland AISI304 AISI304 1

12 BellevilleWasher DIN1722150CrV4 DIN1722150CrV4 2

13 Stem ASTMA276316/ASTMA56417-4PH ASTMA276316/ASTMA56417-4PH 1

14 GlandNut AISI304 AISI304 1

15 LockClip AISI304 AISI304 1

16 SpringWasher AISI304 AISI304 1

17 HandleNut AISI304 AISI304 1

18 BodyBolt ASTMA193B8 ASTMA193B7 8-12

19 Handle AISI304 ZincPlatedSteel 1

20 Sleeve VinylPlastisol VinylPlastisol 1

21 StopPin AISI304 CarbonSteel 1

22 StemO-Ring Viton Viton 1

23 Anti-StaticDevice AISI316 AISI316 1

Size ØD L E F G H W ØA BISO 5211

Weights KGIN DN IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

1/4” 8 0.43 11.0 4.92 125.0 0.35 9.0 0.31 8.0 1.48 37.5 2.76 70.0 5.51 140.0 0.56 14.2 0.39 10.0 F04 1.4

3/8” 10 0.43 11.0 4.92 125.0 0.35 9.0 0.31 8.0 1.48 37.5 2.76 70.0 5.51 140.0 0.69 17.6 0.39 10.0 F04 1.3

1/2” 15 0.55 14.0 4.92 125.0 0.35 9.0 0.31 8.0 1.48 37.5 2.76 70.0 5.51 140.0 0.86 21.8 0.51 13.0 F04 1.3

3/4” 20 0.81 20.5 5.31 135.0 0.43 11.0 0.43 11.0 1.97 50.0 3.54 90.0 7.09 180.0 1.07 27.2 0.51 13.0 F04-F05 1.7

1” 25 0.98 25.0 5.91 150.0 0.43 11.0 0.43 11.0 2.36 60.0 3.94 100.0 7.09 180.0 1.33 33.9 0.59 15.0 F04-F05 2.8

1-1/4” 32 1.24 31.5 6.69 170.0 0.55 14.0 0.63 16.0 2.83 72.0 4.41 112.0 8.46 215.0 1.68 42.7 0.59 15.0 F07 3.3

1-1/2” 40 1.46 37.0 6.50 165.0 0.55 14.0 0.63 16.0 2.99 76.0 4.53 115.0 8.46 215.0 1.92 48.8 0.63 16.0 F10 5.4

2” 50 1.97 50.0 7.48 190.0 0.55 14.0 0.63 16.0 3.66 93.0 5.24 133.0 8.46 215.0 2.41 61.2 0.63 16.0 F10 8.8

DIMENSIONS

MATERIAL LIST

21

18

10 11 12 13 14 15 16 17 19 20

22

9

23

8

7

6

5

4

3

2

1

SOCKET WELD

ØA

H

GF

L

ØD

W

B

ISO 5211

E


BV100-MS SERIES

BV100-MS SERIES (MODEL KI-L830) METAL SEATED BALL VALVE 8~50NB

• Size Range: 1/4” - 2” (DN8 - DN50) • Pressure Rating: 2000 PSI (800 Class) • End Connection: Threaded, Socket Weld & Buttweld • Service Application: Slurries, Pulp Stock, Solid-Containing Fluids • Firesafe API 607

Item Description Stainless Steel Carbon Steel Q’ty1 Body ASTMA351CF8M ASTMA216WCB 12 BodyCap ASTMA351CF8M ASTMA216WCB 23 Ball ASTMA351CF8M/316(Hardened/Coatings) ASTMA351CF8M/316(Hardened/Coatings) 14 Seat ASTMA276316(Hardened/Coatings) ASTMA276316(Hardened/Coatings) 25 SeatGasket Graphite Graphite 26 SeatPacking AISI304 AISI304 2

7 SeatSpringJISG3565SWOCV-V/ASTMA276304/ASTMB637InconelX-750

JISG3565SWOCV-V/ASTMA276304/ASTMB637InconelX-750

24-32

8 BodyGasketPTFE PTFE 2Graphite Graphite 2

9 ThrustWasherPTFE PTFE 1Graphite Graphite 1

10 StemPacking Graphite Graphite 211 Gland AISI304 AISI304 112 BellevilleWasher DIN1722150CrV4 DIN1722150CrV4 213 Stem ASTMA276316/ASTMA56417-4PH ASTMA276316/ASTMA56417-4PH 114 GlandNut AISI304 AISI304 115 LockClip AISI304 AISI304 116 SpringWasher AISI304 AISI304 117 HandleNut AISI304 AISI304 118 BodyBolt ASTMA193B8 ASTMA193B7 12-1619 Handle ASTMA351CF8 ASTMA216WCB 120 SteelPipe AISI304 CarbonSteel 121 Sleeve VinylPlastisol VinylPlastisol 122 FixingScrew(Pipe) AISI304 CarbonSteel 123 FixingScrew(Stem) AISI304 CarbonSteel 124 StopPin AISI304 CarbonSteel 125 StemO-Ring Viton Viton 126 Anti-StaticDevice AISI316 AISI316 1

Size ØD L E F G H W ØA CISO 5211

WeightsKGIN DN IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM

2-1/2” 65 2.56 65.0 8.66 220 0.87 22 0.94 24 4.59 116.5 6.81 173 18.11 460 2.91 73.9 0.67 17 F07-F10 16

3” 80 3.15 80.0 9.84 250 0.87 22 0.94 24 5.00 127.0 7.24 184 18.11 460 3.54 89.8 0.67 17 F07-F10 24.6

4” 100 3.94 100.0 11.02 280 1.06 27 1.14 29 6.26 159.0 9.53 242 23.62 600 4.54 115.2 0.79 20 F10-F12 37.0

MATERIAL LIST

DIMENSIONS

21

22

23

17

24

9

25

8

7

6

5

4

3

2

1

SOCKET WELDLB

ØA

H

G

ØD

ISO 5211 W

E

F

10 11 12 13 14 15 16 18 19 20


326-FUS SERIES

BV100-MS SERIES (MODEL KI-L830)METAL SEATED BALL VALVE 65~80NB

• Size Range: 2-1/2” - 4” (DN65 - DN100)• Pressure Rating: 2000 PSI (800 Class)• End Connection: Threaded, Socket Weld & Buttweld• Service Application: Slurries, Pulp Stock, Solid-Containing Fluids• Firesafe API 607


PRESSURE / TEMPERATURE1500 CLASS

0 100 200 300 400 500

PR

ES

SU

RE

(P.S

.I.)

-50

1000

800

600

400

200

2200

2000

1800

1600

1400

1200

600

PRESSURE/ TEMPERATURE

3200

3000

2800

2600

2400

3600

3400

DELRIN PEEK PEEK +30% CARBON

TEMPERATURE (˚F)

PRESSURE / TEMPERATURE900 CLASSPRESSURE/ TEMPERATURE

0 100 200 300 400 500

PR

ES

SU

RE

(P.S

.I.)

-50

1000

800

600

400

200

2200

2000

1800

1600

1400

1200

600

RPTFE TFM DELRIN PEEK

TFM4215

TEMPERATURE (˚F)

BLOCK

WELDING

BLEED BALL VALVE

SOCKETWELD BUTTWELD

L

NPT

OPTIONS• Fire safe design•Springreturnhandle(deadmanhandle)•Steamjacketing•Cryogenicbonnet•Fugitiveemissionbonnet• HastalloyC/Superduplex/Alloy20/Monel

FEATURES•Body&endcapsinvestmentcast•Fullbore&Std.boredesign•Adjustablestempacking• Blow-out proof stem design• Locking device• Endtypes:threaded/socketweld/buttweld

Twopressureratingsareavailable:-2160psi(Class900)and3600psi(Class1500).Stainlesssteel,carbonsteelorspecialalloysteelcanbesupplied.

Allthevalvesondoubleblock&bleedvalvearewithISO5211directmountingpadforautomation.The900classvalvesaresuppliedwithTFM1600,(Delrin),orRPTFEseats,1500classhavePEEK5004.

Valveconstruction&wallthicknessiscompliantwithANSIB16.34wallthicknessrequirements.V-ballwith30°,60°,or90°portisavailableas anoptionfordifferentflowratepipelinedesigns.

BV100 SERIES

DOUBLE BLOCK & BLEED BALL VALVE CLASS 900 TO 1500 BV100 - DB300 SERIES


32~50NB (1-1/4”~2”) 50NB (2”)

14 15 1617

18 19

6

7B

7A

8

9

10

11

12

13

5 3 2 120 4

21 22

No. Parts Stainless1 EndCap CF8M2 Body CF8M3 Ball SS3164 Seats PEEK/Delrin5 Gasket PTFE/Graphite6 Bolts SS3047.1 ThrustWasher PTFE/Graphite7.2 ThrustWasher PEEK8 Stem CF8M9 StemPacking PTFE/Graphite10 GlandWasher SS30411 DiscWasher SS30112 GlandNut SS30413 NutStop SS30414 SpaceWasher SS30415 StopPlate SS30416 StemNut SS30417 StopPin SS30418 Lever SS30419 LeverCover Vinyl20 Block CF8M21 Pipe CF8M22 BleedBallValve23 Lever SteelPipe24 Gland CF825 Bolts SS304

MATERIALS LIST

Size Flow Coefficient1/2” 193/4” 37

1” 591-1/4” 841-1/2” 145

2” 249

FLOW COEFFICIENT 900 CLASS

15NB~25NB (1/2”~1”)

EXPLOSION “A”

252423

5

4

7A

7B

22

50NB (2”)

BV100-MS SERIES

BV100 - DB300 SERIES



DIMENSIONSSize A B C D d1 d2 F G H L

mm inch mm mm mm mm mm mm mm mm mm mm

15 1/2” 48 9.5 130 15 6.0 6.0 36 G 9 123.8

20 3/4” 53 12 155 20 6.0 6.0 42 50 11 152

25 1” 59 12 155 25 6.0 7.0 42 50 11 174

32 1-1/4” 74 16 205 32 7.0 9.2 50 70 14 233

40 1-1/2” 80 16 205 38 7.0 9.2 50 70 14 266

50 2” 96 20 350 50 9.2 11.4 70 102 17 336

Size A B C D E

in mm in mm in mm in mm in mm in mm

1/4” 8 0.377 9.6 1.122 28.5 2.244 57.0 1.161 29.5 7.244 184

3/8” 10 0.492 12.5 1.122 28.5 2.244 57.0 1.161 29.5 7.244 184

1/2” 15 0.59 15 1.301 33.05 2.602 66.1 1.287 32.7 7.244 184

3/4” 20 0.787 20 1.488 37.8 2.976 75.6 1.440 36.6 7.244 184

1” 25 0.984 25 1.716 43.6 3.433 87.2 1.779 45.2 9.212 234

1-1/4” 32 1.259 32 1.909 48.5 3.818 97.0 2.106 53.5 12.920 330

1-1/2” 40 1.496 38 2.283 56.6 4.456 113.2 2.342 59.5 12.920 330

2” 50 1.968 50 2.637 67.0 5.275 134.0 2.807 71.3 12.920 330

DIMENSIONS

Available up to 100NB (4”).

No. Part Name Material

1 Body A351-CF8M A216-WCB

2 EndCap A351-CF8M A216-WCB

3 Ball ASTMA351Gr.CF8M

4 BallSeat RPTFE

5 BodySeal PTFE

6 Stem A276TYPE316

7 ThrustWasher RPTFE

8 StemPacking RPTFE

9 GlandNut SUS304

10 StemWasher SUS304

11 StemNut SUS304

12 HandleHead A351-CF8&SS304

13 Bolt SUS304

14 HandleFlange A351-CF8

15 HandleSleeve VINYL

16 HandleBolt SUS304

17 Spring 55CrSi

18 SpringRod SUSSS304/316

19 SpringRodBinder SS304

20 TubeHandle SS304

21 TensionAdjustmentWasher SS304

22 HexNut SS304

MATERIALS LIST

PRESSURE TEMPERATURE RATING

50 100 150 200 250 300 350 400 450 500

2000

1600

1200

800

400

0

Optional ZI locking device c/w ISO Mount pad

SADDLE

BARRED PLATELOCK

FEATURES• Full Port• Spring Return Handle• Investment Cast Body• Blow Out Proof Stem/ Floating Ball• Adjustable Packing Gland• 150 PSI Saturated Steam• Working Pressure 13789 kPa (2000PSI) WOG• Threads Conform to ANSI B1.20.1, BS21, DIN259/2999• Also available in 3 piece body• Also available in 3000 PSI, 3700 PSI• Available in BSP or NPT ends• Available in Bronze, SS & Carbon Steel


SPRING RETURN DEADMAN HANDLE

DEADMAN SPRING RETURN BALL VALVE(FULL PORT) S-76-500 SERIES

13452

131110968

MG

H

D

C

A

B

1614

2015

1817

2122

12

13

19

E

7


Item Part Name Quantity Materials1 HandleHead 1 CF82 Anchor 1 CF83 AnchorScrew 1 SS3044 SpringRod 1 SS304

4A SpringRodAnchor 1 SS3045 Spring 1 SS3016 HandleExtension 1 SS3047 Sleeve 1 PVC8 Washer 2 SS3049 HexNut 2 SS30410 SocketHeadScrews 2 SS30411 Washer 1 SS30412 Nut 1 SS304

MATERIALS LIST

Kit Part No. L J D (ISO 5211) TorqueS71-504-00-Z 170 9 F03/F04 15NmS71-507-00-Z 207 9 F03/F04 20NmS71-507-01-Z 220 11 F04/F05 20NmS71-508-00-Z 275 11 F04/F05 30NmS71-508-01-Z 280 14 F05/F07 30NmS71-509-01-Z 450 14 F05/F07 55Nm

DIMENSIONS & TORQUE

SPRING RETURN DEADMAN HANDLE FOR QUARTER TURN VALVES S71(-Z) SERIES (KITS)

SPRING RETURN DEADMAN HANDLE

FEATURES• All components of lever are stainless steel• Operating torque should be sized according

to valve torque, media, pressure and safety.• Can be fi tted on 1P, 2P, 3P valve• Available in ISO F03 to F07• 55CrSi Spring Material


OPEN

2

1

3

4A

5

6

7

8

9

10

11 12

4

CLOSE

SS304SWPSS304

SS304

BOLT7

98

6

WASHERSPRING

HANDEL HEX

SS304

VINYL

SS304NUT10

1211

HANDLE SLEEVE

HANDLE

CF8SS304

MATERIAL

SS304

CF8SS304

NO.12

HANDEL GLANDPART NAME

HANDLE BOLT

NUT

3

5

4 WASHER

HANDLE

1

1

11

2

11

Q'TY12

1

11

6 7

SS304SWPSS304

SS304

BOLT7

98

6

WASHERSPRING

HANDEL HEX

SS304

VINYL

SS304NUT10

1211

HANDLE SLEEVE

HANDLE

CF8SS304

MATERIAL

SS304

CF8SS304

NO.12


HANDLE BOLT

NUT

3

5

4 WASHER

HANDLE

1

1

11

2

11

Q'TY12

1

11

12

11

2

10

1

10

SS304SWPSS304

SS304

BOLT7

98

6

WASHERSPRING

HANDEL HEX

SS304

VINYL

SS304NUT10

1211

HANDLE SLEEVE

HANDLE

CF8SS304

MATERIAL

SS304

CF8SS304

NO.12


HANDLE BOLT

NUT

3

5

4 WASHER

HANDLE

1

1

11

2

11

Q'TY12

1

11

3

4A

5

9

8

4

10

Model S71 (100NM Torque)see Flowturn Multiway &

Deadman Ball Valves CatalogueLOCK

1 2 3 4 5 6 7 8 9 10 11

End Connection2

Model 1

FS900

BV100

BV100-DB300

FS660

FS660-72

FS660-SKF

VT3

VT3B

T203SR

A NPT

B BSP

C Socketweld

D NPTxSocketweld

E Buttweld

F Buttweldpupend

G Plainpupend

H Socketweldpupend

J FlangedRF

K FlangedRTJ

Z Special

Operation Type3

D DeadmanSpringLever

E ElectricOperator

G GearOperator

K LockableLever

L LeverOperator

P PneumaticOperated

Z Other

1Fullbore2piecethreadedbody

2Reducedbore2piecethreadedbody

3Fullbore3pieceboltedbody

4Reducedbore3pieceboltedbody

5Reducedbore1piece

6Fullbore2piecebody,sealwelded

7Reducedbore2piecebody,sealwelded

8Fullbore2pieceboltedbody

9Reducedbore2pieceboltedbody

0 DoubleBlock&Bleed

Body & Bore Type4

For Metal Seated see separate partnumbersystem

A Class150

B Class300

C Class400

D Class600

E Class800

F Class900

G Class1500

H Class2500

J 800PSIWOG

K 1000PSIWOG

L 3000PSIAPI

M 5000PSIAPI

N 6000PSIAPI

O 7500PSIAPI

Pressure 5

Seat

Body Material

6

7

C CarbonreinforcedPTFE

D Devlon

E Peek

F PurePTFE

G CarbonFibre(Graphite)

H GlassReinforcedPTFE

(GlassFibreContent20%)

N Nylon

T Tefzel

U Delrin

V Viton

X NBR

Z Other

A WCB

B A105/A105N

C LCB(lowtemperature≥-46C)

D LF2(lowtemperature≥-46C)

E CF8

F 304

G CF8M

H 316

I CF3M

J 316L

K CF3

L WC6

M WC9

N F51/CD3MN

O F55/CE3MN

P CE8M

Z Other

B V 1 0 0 - A L 3 G N A A B D I M

12

A 316/CF8M

B 304/CF8

C ENP(.003”)

D LCB(≥-46C)

E F51/CD3MN

F WC6

G WC9

K 304L/CF3

I 316L/CF3M

Z Other

Trim Code8

A PTFEB GraphiteC Graphite/VitonZ Special

Stem Sealing9

Blank None

1 B7

2 B7M

3 B8

4 B8M

5 Duplex

6 L7

7 L7M

9 Special

B Bleed

G GreaseInjection

M DirectMountPad

V VentedBall

Other Features12

Bolting11

Blank NoneA PTFEB Graphite(GRP)C Graphite+VitonD Graphite+PTFEZ Special

Body Gasket10

PART NUMBER SYSTEM

PART NUMBERS FOR SMALL DIAMETER BALL VALVES - FLOATING


AustralianPipelineValvedon’tconsiderinourdesignthefollowingfactorsofrisk:

1. AustralianPipelineValve‘Standard’ballvalvescanbeusedinatemperaturerangebetween-28.8to+200°C. (Note,pressurelimitationsapplyabove38°CrefertoPressure/Temperaturecharts.)Forservicetemperatures below-28.8°Cballvalveconstructionmaterialsshallbesubmittedtoanimpacttestattheminimumservice temperature.Fortemperaturesoutsideoftherangeof-28.8°Cto+200°Cballvalveshavetobeprovidedwith seats,sealsandbodymaterialabletowithstandthetemperaturedegreerequired.

2. Theonusisonthecustomertospecifyallmaterialsofconstructionandserviceconditions.AustralianPipeline Valveshallassumestandardmaterialsandconditionsifnototherwisespecified.

3. AustralianPipelineValve‘Standard’ballvalvesarenotequippedwithdevicessuitabletoavoidinternal over-pressurescausedbyincorrectoperationsofprocessorby-fluids&liquidssubjectedtoanincreaseof volumeand/orpressure(thesedevices,suchastheover-pressureholeintheballorsafetyseatsareavailable uponrequest).

4. AustralianPipelineValve‘Standard’ballvalvesarenotdesignedwithspecialdevicestowithstandasudden thermaljump(thermalshock).

5. IngeneralAustralianPipelineValve‘Standard’ballvalvesarenotmechanicallydesignedtobearoverloadsdue toexceptionalatmosphericornaturalphenomenon’s(suchasearthquakes).

6. IngeneralAustralianPipelineValve‘Standard’ballvalvesarenotdesignedtobearloadsonflanges,onpipe connectionsorpipeline.

7. IngeneralAustralianPipelineValve‘Standard’ballvalvescan’twithstandiceinsidetheirbodies(inthiscase usermustspecifytheoptionalstemextensionforinsulating,avoidingthepresenceofresidualproductinside thevalve).

8. AustralianPipelineValve‘Standard’ballvalvesarenotsuitableforlowtemperatureservicebelow-29°C(-20°F) unlessprovidedwithcryogenicstemextensionandothermodifications(availableonrequest).

9. AustralianPipelineValve‘Standard’ballvalvesaresuitablefor‘industrial’oxygen(notmedical)servicewhen supplieddegreasedandpackedinpolyethylenebagsonly.

10. Thecompatibilitybetweenballvalvesconstructionmaterialsandmediumisselectedbytheuser.Theuseris ultimatelyresponsibleforverifyingthecompatibilitybetweenmediumandmaterials.

11. Abrasiveordirtyservice,hightemperatureservice,lowtemperatureservice,vacuumservice,nearzero pressureserviceandotherspecialapplicationsshouldbeclearlystatedwhenrequestingquotation.

BALL VALVE START-UP

Beforeinstallingtheballvalveontothepipe-lineitismandatoryfortheusertoverifythecompatibilityoftheballvalvewithserviceconditions(medium,temperatureandpressure).Withreferencetostandardballvalvesheldinstocktheresellerandenduserwillhavetoassurethemselvesofthecompatibilitywiththeuseofconditionsrequiredbythecustomer.AustralianPipelineValveballvalvesmustbeonlyusedforon-off(fullyopen/fullyclosed)service.

Beforeusingtheballvalveinapotentialexplosiveatmosphereit’snecessary:-

• Toverifythecompatibilitybetweentheballvalveandthezoneinwhichtheballvalveshouldbeinstalled.• Toforeseethepipe-linegroundconditiononwhichtheballvalveshouldbeinstalled.• Tocheckthatthetemperatureiftheballvalvesurfaceisnothigherthantheflammablepointoftheatmosphere inwhichtheballvalveisinstalled(inthiscasespecifyaninsulatingcoverdeviceforthevalveandanextension forthewrench)• Beforeinstallingballvalveswithweldingendstomakesurethattheprocessofweldingiscarriedoutin accordancewithallthesafetyrequirementsoftheclassifiedzone.• Toavoidmechanicalknocksduringtheinstallationthatmaycausesparks.

Australian Pipeline Valve cannot be held responsible for damage caused by use of the product especially if it is improper use or modified.

TECHNICAL

CONSIDERATIONS OF TECHNICAL RISK / LIMIT OF LIABILITY TO CLIENT FOR BALL VALVES


AUSTRAL IAN P I P E L I N E VA LVE

NOTES

NOTES


View our catalogues at www.australianpipelinevalve.com.au

AUSTRALIAN PIPELINE VALVE BRAND RANGE - CATALOGUES

APV FAMILY OF BRANDS RANGE - CATALOGUES

COMPLETE PRODUCT LINE

“Australian Pipeline Valve

produces isolation,

control and flow reversal

protection products for

severe and critical service

media in utility, steam,

pipelines, oil & gas

and process industries.

APV valves and pipeline

products form the most

competitive portfolio

in the market.”

Oilfield Products Valves & Wellheads

Gate, Globe & Check Valves - Forged Steel

Plug Valves Lubricated, Sleeved & Lined

Gate, Globe & Check Valves - Cast Steel

Diamond Gear Gearboxes

Flowturn Gate, Globe & Check Valves

Flowturn Instrument Valves

Flowturn Ball Valves Multiway & Deadman

Flowturn Strainers & Sight Glasses

Supercheck Wafer Check Valves

Superseal Butterfly Valves

Steamco Steam Valves

Superseal Industrial Ball Valves

TwinLok Tube Fittings Uniflo Check ValvesTorqturn Actuators

Ball Valves Floating & Trunnion Mounted

Ball Valves Floating Small Bore

Ball ValvesSpecial Service

Product Brochure

Contact us for your local stockist/distributor

QUALITY ASSURANCE AND CERTIFICATIONWe are continually improving all facets of quality assurance. Full metallurgical and test certificates arealways supplied for all pressure retaining parts, we can also provide it on major trim components.

We have endeavoured to provide a broad outline of our range and capabilities. Because we are continually developing new productsfor our customers this catalogue will, to some extent be incomplete. This catalogue is a general overview only, individual drawingsand data sheets can be furnished on request.

If you have any requirement in the field of valves, please contact us for a prompt response. Continuous development ofAustralian Pipeline Valve products may necessitate changes in the design or manufacturing processes. Australian Pipeline Valvereserves the right to effect any such changes without prior notice.

www.australianpipelinevalve.com.au

© Australian Pipeline Valve 1990 - 2019 Edition

LOCAL DISTRIBUTOR

A D E L A I D E • B R I S B A N E • P E R T H

Global Supply Line is a distributor & stockist, supplying worldwide.Full stock list online www.globalsupplyline.com.au

Contact email: [email protected]

www.globalsupplyline.com.au/stock-list-valves/

mailto:[email protected]

ball valves - floating small bore · • basic design complied with ansi b16.34 and mss sp-110. •...

Documents