bag-dump
TRANSCRIPT
-
7/29/2019 Bag-dump
1/2
www.ktron.com
Bag Dump
Station
Rev. 2009-11
Doc# 0990034308
K-TRON PREMIER Product Specifcation
Bag Dump Station & Bag Dump Hopper
S-501103-enPage 1 o 2
Application
The Bag Dump Station with integral dust control and the Bag DumpHopper allow the introduction o dry bulk material to a vacuum system,
pressure system, or directly to a eeder or mixer.
Design
The Bag Dump Station with integral dust control is designed to ensurea clean, dust-controlled environment while making it easy to unloadmaterial received in bags. As the operator unloads material, the sta-tions direct drive an draws dust-laden air away rom the operator.The dust is routed to the continuous reverse cartr idge lters. The BagDump Station has a quick opening panel, requiring no hand tools oreasy access to the cartridge lters or removal or normal service.
The Bag Dump Hopper is designed to provide an economical means ounloading bags. The hopper may be integrated with a central exhaust
system to provide dust control unctionality.
Technical Data
Bag Dump Station with Integral Dust Control
Standard Features
Carbonsteelconstruction,outsidesurfacespaintedRAL7035grayw/ FDA epoxy-coated interior or 1.4301 (AISI 304) stainless steelconstruction
Factory-wiredcontrolpanelwithmaindisconnect,operatorpushbuttons and motor starter
Supplypower:460VAC,3-phase,4amp,50/60Hz Filtrationareaof9m2 [100 t2] o 100% spun bond polyester 1.1kW[1.5HP]exhaustfanwith18m3/min[620ft3/min] air fow Heavydutyfabricatedconstruction Lightweightaccessdoorwithintegratedgasspring 305mm[12in]squaredischargeformountingaprobebox Rigidgratetoprevententryofunwantedpiecesintothesystem Vibratormountingpads Nominal889mm[35in]dumpheightwitha330mm[13in]dis-
charge clearance NECHazardousLocation:Class2,Div.2,GroupsE,F&G
CEcompliant
Bag Dump Hopper - No Filtration
Standard Features
Carbonsteelconstruction,outsidesurfacespaintedRAL7035grayw/ FDA epoxy-coated interior
76mm[3in]O.D.verticalventstubforconnectiontocentralexhaustsystem
Exhaustairblastgate Heavydutyfabricatedconstruction Hingedaccessdoor 203mm[8in]rounddischargeange Rigidgratetoprevententryofunwantedpiecesintothesystem Nominal1,219mm[48in]dumpheightwitha584mm[23in]
discharge clearance
CEcompliantOptions
1.4301(AISI304)and1.4404(AISI316)stainlesssteelandaluminumconstruction
Epoxy-coatedinterior Aerationpads Vibrator Levelprobes Dustcollectionfanandlter Customdischarge,supportstandorclearance Bagdisposalstation Explosion-proofNEMA7or9construction NECHazardousLocation:Class1,Div.1,GroupsG&D ATEXversionsavailable
Bag Dump Station with
Integral Dust Control
Bag Dump Hopper
No Filtration Included
-
7/29/2019 Bag-dump
2/2
Bag Dump
Station
K-Tron Process Group www.ktron.com
All addresses on sheet: / Alle Adressen au Blatt: / Toutes les adresses sur fche: I-000001
Rev.2009-11
Copyright by K-TRON. Covered by patents in USA and foreign countries. Specications subject to change without notice.
K-TRON PREMIER Product Specifcation
Bag Dump Station & Bag Dump Hopper
S-501103-enPage 2 o 2
Bag Dump Station Dimensions mm [in]
Note:FormoreinformationontheseproductsconsultyourK-TronPremierSalesRepresentative.
Caution:Measurementsareforgeneralreferenceonly.Pleaseconsultdimensionaldrawingforexactmeasurements.
Bag Dump Hopper Dimensions mm [in]
2104.1
[82.8
4]
331.8 [13.06]
182.6 [7.19]
914.4
[36]S
Q.
19.1 [.75]88.9 [3.5]
101.6 [4]101.6 [4]88.9 [3.5]
304.8 [12] SQ.419.1 [16.5] SQ.
(16) 11.1 [0.44]
825.5 [32.5] SQ.
889[35]
6.2-6.9 BAR [90-100 PSIG]
OF CLEAN, DRY
COMPRESSED AIR
SUPPLY POWER
460 VAC, 3-PHASE,
4 AMP, 50/60 Hz
508 [20]
762 [30]
590.
6
[23.
25]
1238.
3
[48.
75]
1981.
2
[78]
76.2 [3] O.D.
679.
5
[26.
75]
962.2 [37.88]
1016 [40]
203.2 [8] I.D.
266.7 [10.5] O.D.
241.3 [9.5] D.B.C.
(12) 11.1 [0.44]