bacteriological analysis of analysis,chemical analysis of water,solid phase extraction
TRANSCRIPT
![Page 1: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/1.jpg)
Submitted by:Sharath. H.N
M Pharma 1st year
Bacteriological and chemical analysis of Water
![Page 2: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/2.jpg)
Contents
• Introduction to Analysis of water• Bacteriological Analysis of Water• Chemical analysis of water• Solid phase extraction
![Page 3: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/3.jpg)
• One of the things which make Earth a unique planet in this universe is continuous availability of water, a vital
• requisite for the existence of life. Water is also the essential prerequisite of agriculture and industrial production, the source
• of food needed for the survival of life. Thus, life on earth is entirely and exclusively dependent on water.
![Page 4: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/4.jpg)
• Water-related diseases continue as a major health problem globally. An estimated, four billion cases of diarrhea yearly represented 5.7% of the worldwide disease in the year 2000 (WHO, 2002).
• So Physical , chemical and bacteriological analysis of water was of great need for beneficity of people.
![Page 5: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/5.jpg)
WHO Definition
Defines safe drinking water as water that “does not represent any significant risk to health over the lifetime of consumption, including different sensitivities that may occur between life stages.”
![Page 6: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/6.jpg)
6
Categories of Contaminants
Chemicals
Microbiological
Physical
![Page 7: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/7.jpg)
7
Categories of Contaminants
Chemicals· Organic· Inorganic· pH
Microbiological· Bacteria· Virus· Protozoa· Helminths
Physical· Turbidity· Colour· Odor· Taste
![Page 8: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/8.jpg)
Water Sampling-Microbiological sampling-Indicator organisms for pathogen presence
Physical sampling-turbidity, conductivity, total dissolved solids etc
Chemical sampling- pH, dissolved oxygen, phosphates, chemical oxygen demand, biological oxygen demand, mineral impurities (iron, manganese, chloride, lead, sodium etc)
![Page 9: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/9.jpg)
MICROBIOLOGY OF WATER
![Page 10: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/10.jpg)
Pathogens
• 4 types of pathogens– Bacteria– Virus– Protozoa– Helminths
bacteriaa on the tip of a pin
micro-organism that cause disease
![Page 11: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/11.jpg)
FACTORS AFFECTING NUMBER AND TYPE OF BACTERIA IN WATER
•Type of water:Surface or deepMineral springs
•Presence of organic matter•Temperature•Light•pH•Dissolved oxygen•Rainfall•Season•Storage•Filtration
![Page 12: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/12.jpg)
Microbiological Testing Methods
• 3 methods to determine presence of bacteria in water:– Presence-Absence (P-A)– Most Probable Number (MPN)– Membrane Filtration
![Page 13: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/13.jpg)
Presence-Absence (P-A)
• Simplest method• Add water sample to a bottle containing broth and let it sit
for 24-48 hours• Color will change if indicator organism is present• Does not show numbers of bacteria!• If the sample is positive, the water should be re-tested using
membrane filtration to determine the number of bacteria• Not recommended by WHO for analysis of surface water
and untreated community water supplies• Not recommended for testing the efficiency of household
water treatment technologies (e.g. biosand filter)
![Page 14: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/14.jpg)
Presence-Absence
Positive for E. coli
Negative
Positive for Coliforms
![Page 15: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/15.jpg)
Most Probable Number (MPN)• Tells the number of bacteria that are most likely to be
in the water sample
• Add water sample or diluted sample to 5 or 10 or test tubes (or larger tray 50 – 96 tubes)
• Incubate for 24-48 hours
• Gas production and/or cloudiness will be visible if the indicator organism is present
• Using a table provided, report the number of positive tubes as number of colonies per 100 mL of sample.
• Typically used for wastewater or turbid samples
![Page 16: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/16.jpg)
Most Probable Number (MPN)# Positive
TubesMPN Index
(CFU/100mL)0 <1.11 1.12 2.23 3.64 5.15 6.96 9.27 12.08 16.19 23.010 >23.0
Sample Table for 10 tube test
![Page 17: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/17.jpg)
Most Probable Number (MPN)
• Characteristics:– Quantitative results– Simple to understand and use– Relatively inexpensive– Can be used with turbid water– More labor-intensive than P-A– Requires some training– Requires incubator & other equipment
![Page 18: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/18.jpg)
Membrane Filtration• Most accurate method to count bacteria• Filter 100 mL of a water sample
– Add broth to a Petri dish which provides nutrients for the indicator organism to grow
– Filter the water using the filtration equipment– Transfer the filter paper to the Petri dish – Incubate for 24-48 hours depending on the broth
• If the indicator organism is present, colonies will appear on the filter paper and can be counted
• Results are reported as the number of colonies per 100 mL of water sample (CFU/100mL)– CFU = colony forming units
![Page 19: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/19.jpg)
19
Membrane Filter Technology
• A membrane is a thin material that has pores (holes) of a specific size
• Membranes trap larger particles that won’t fit through the pores of the membrane, letting water and other smaller substances through to the other side
![Page 20: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/20.jpg)
![Page 21: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/21.jpg)
![Page 22: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/22.jpg)
Membrane Filtration EquipmentField Kits
![Page 23: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/23.jpg)
23
Membrane Filtration Equipment
Incubator
![Page 24: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/24.jpg)
24
Membrane Filtration EquipmentNalgene Testing Kit
![Page 25: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/25.jpg)
25
Membrane Filtration• Advantages:
– Able to count the number of bacteria– Most accurate test method– Ability to test many samples at once– Internationally recognized method– Rapid– Easy & Economical.– Gives direct result. – Useful in rural areas.– Samples can be tested in the field
![Page 26: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/26.jpg)
26
Membrane Filtration• Limitations:
– More labour intensive than MPN, P-A– Requires more training– Requires additional equipment– Cost of consumables can be high in many countries
– Turbid water interferes with bacterial growth.
– Noncoliforms interferes with counting of coliforms.
– Toxic substances in the water may be absorbed by filter and interferes with bacterial growth.
![Page 27: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/27.jpg)
27
Chemical testing of water
• Chemical Testing Methods– Test strips– Colour disc comparators– Colorimeters & photometers– Digital meters– Arsenic specific kits
![Page 28: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/28.jpg)
28
Chemical Tests
• There are many different chemicals that can be found in our drinking water
• Difficult and expensive to test for all chemicals so we need to select a few that are a priority in the local area– Iron, Manganese– Arsenic, Fluoride– Chlorine– Total Dissolved Solids
![Page 29: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/29.jpg)
29
Chemical Test Methods
• Test (reagent) strips• Colour disc comparators• Colorimeter and photometer• Digital meters
![Page 30: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/30.jpg)
2009-08 30
Test (Reagent) Strips• Designed to react with
specific chemicals– pH, chlorine, hardness, etc.
• Compare colour on stick to colour chart
Advantages:– Inexpensive– Easy and simple– Provides rough estimate
Limitations:– Requires visual interpretation of
colour– Low accuracy +/- 10 %
![Page 31: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/31.jpg)
31
Colorimeters & PhotometersPhotometer (Wagtech)
• Uses light source to measure chemical concentration
• Test a range of chemicals
Advantages:– More accurate
Limitations:– More expensive– Power source necessary– Proper training required
Colorimeter (HACH)
![Page 32: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/32.jpg)
32
Arsenic Test Kits• Designed specifically for
arsenicAdvantages:
– Fairly accurate – range 2 to 100 ug/L
– Portable– Relatively easy to use
Limitations:– Requires visual interpretation
of colour– Expensive
![Page 33: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/33.jpg)
Solid phase extractionSolid phase extraction (SPE) is an increasingly useful sample
preparation technique. With SPE, many of the problems
associated with liquid/liquid extraction can be prevented, such as
incomplete phase separations, less-than-quantitative recoveries,
use of expensive, breakable specialty glassware, and disposal of
large quantities of organic solvents.
SPE is more efficient than liquid/liquid extraction, yields
quantitative extractions that are easy to perform, is rapid, and can
be automated. Solvent use and lab time are reduced.
![Page 34: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/34.jpg)
SPE is used most often to prepare liquid samples and extract semivolatile or nonvolatile analytes, but also can be used with solids that are pre-extracted into solvents.
SPE products are excellent for sample extraction, concentration, and cleanup. They are available in a wide variety of chemistries, adsorbents, and sizes.
Selecting the most suitable product for each application and sample is important.
![Page 35: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/35.jpg)
Based on types of seperations solid phase extraction was classified into 4 types
•Reversed Phase•Normal Phase•Ion Exchange•Anion exchange•Cation exchange
![Page 36: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/36.jpg)
Reversed Phase SPE
Reversed phase separations involve a polar or moderately polar sample matrix and a nonpolar stationary phase.
The analyte of interest is typically mid- to nonpolar. Several SPE materials, such as the alkyl- or aryl-bonded silicas (LC-18, ENVI-18, LC-8, ENVI-8, LC-4, and LC-Ph) are in the reversed phase category.
Here, the hydrophilic silanol groups at the surface of the raw silica packing (typically 60Å pore size, 40μm particle size) have been chemically modified with hydrophobic alkyl or aryl functional groups by reaction with the corresponding silanes.
![Page 37: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/37.jpg)
Normal Phase SPE
Normal phase SPE procedures typically involve a polar analyte,a mid- to nonpolar matrix (e.g. acetone, chlorinated solvents, andhexane), and a polar stationary phase Polar-functionalized bondedsilicas (e.g. LC-CN, LC-NH2, and LC-Diol), and polar adsorptionmedia (LC-Si, LC-Florisil, ENVI-Florisil, and LC-Alumina) typicallyare used under normal phase conditions.
Retention of an analyte under normal phase conditions is primarily due to interactions between polar functional groups of the analyte and polargroups on the sorbent surface.
![Page 38: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/38.jpg)
Ion Exchange SPEIon exchange SPE can be used for compounds that are charged when in a
solution (usually aqueous, but sometimes organic).
Anionic (negatively charged) compounds can be isolated on LC-SAX or
LC-NH2 bonded silica cartridges. Cationic (positively charged) compounds
are isolated by using LC-SCX or LC-WCX bonded silica cartridges.
The primary retention mechanism of the compound is based mainly on the
electrostatic attraction of the charged functional group on the compound to
the charged group that is bonded to the silica surface.
![Page 39: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/39.jpg)
Anion Exchange SPE
The LC-SAX material is comprised of an aliphatic quaternary amine group that is bonded to the silica surface.
A quaternary amine is a strong base and exists as a positively-charged cation that exchanges or attracts anionic species in the contacting solution — thus the term strong anion exchanger (SAX
![Page 40: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/40.jpg)
Cation Exchange SPE
The LC-SCX material contains silica with aliphatic sulfonic acid groups that are bonded to the surface.
The sulfonic acid group is strongly acidic (pKa <1), and attracts or exchanges cationic species in a contacting solution – thus the term strong cation exchanger (SCX).
![Page 41: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/41.jpg)
References:•International Journal of Innovative research in Science, Engineering and Technology•WHO Guidelines•SUPELCO Pharma bulletein•Internet source
![Page 42: bacteriological analysis of analysis,chemical analysis of water,solid phase extraction](https://reader036.vdocuments.us/reader036/viewer/2022081515/589ab5ea1a28abff4f8b5cef/html5/thumbnails/42.jpg)
THANK YOU