b10 o&m parameter ed7.pdf
TRANSCRIPT
Alcatel-Lucent GSM
O&M Parameters Dictionary
OMC Document
Reference Guide
Release B10
3BK 21253 AAAA TQZZA Ed.07
Status RELEASED
Short title
All rights reserved. Passing on and copying of this document, useand communication of its contents not permitted without writtenauthorization from Alcatel-Lucent.
BLANK PAGE BREAK
2 / 492 3BK 21253 AAAA TQZZA Ed.07
Contents
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71.1 Parameter Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81.2 Parameter Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 VGCS 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 UMTS 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 LCS 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5 GSM 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235.1 Network (CDE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245.2 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495.3 System (CST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 404
6 GPRS 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4236.1 Network (CDE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4246.2 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4366.3 System (CST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 476
7 EGPRS 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4777.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 478
8 DTM 0&M Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 491
8.1 Site (CAE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
3BK 21253 AAAA TQZZA Ed.07 3 / 492
Contents
4 / 492 3BK 21253 AAAA TQZZA Ed.07
Preface
Preface
Purpose The BSS Parameter Dictionary lists all of the O&M Parameters for GSM andGPRS.
What’s New In Edition 07This document was generated from the database 0368_7rl.mdb.
In Edition 06This document was generated from the database 0368_6rl.mdb.
In Edition 05This document was generated from the database 0368_5rl.mdb.
In Edition 04This document was generated from the database 0368_4rl.mdb.
In Edition 03This document was generated from the database 0368_3rl.mdb.
In Edition 02This document was generated from the database 0368_2rl.mdb.
In Edition 01First official release for B10 MR1.This document was generated from the database 0368_1rl.mdb.
Audience This manual is designed for OMC-R users, O&M technicians and systemdesigners.
Assumed Knowledge Not applicable.
3BK 21253 AAAA TQZZA Ed.07 5 / 492
Preface
6 / 492 3BK 21253 AAAA TQZZA Ed.07
1 Introduction
1 Introduction
3BK 21253 AAAA TQZZA Ed.07 7 / 492
1 Introduction
1.1 Parameter ClassificationThe GSM and GPRS parameters are classified into three categories:
Network : Customer Design Engineering parameters also called network
parameters. A CDE Parameter can be specific for a customer and isvalid for the complete network. There are BSC, BTS, MFS and OMC
CDE parameters.
Site : Customer Application Engineering parameter also called siteparameter. The Value of a CAE parameter is different from an instance to
another and changeable from some way (most often them from the OMC).The parameter can be instantiated per BSC, MFS, cell, TRX...
System : ConStanT Parameter also called system parameters. They can
not or shall not be modified. Most of them are hard coded in the systemor defined in configuration files.
1.2 Parameter DescriptionTo each parameter are associated the following characteristics:
Logical Parameter Name : Mnemonic conventionally used in Alcatel
documentation.
Definition : definition/purpose of the parameter.
Coding rules :, Rules of coding, when necessary.
Mandatory rules : Mandatory relationships or inter-dependence of some
data.
Recommended rules : Recommended relationships or inter-dependenceof some data.
Feature : Indicates to which feature the parameter is linked.
Category : Category into which the parameter is classified.
Instance : Possible instance of the parameter.
Value
Min/Max values : Possible range of the parameter values.
Default value : Parameter value in release B7.1 for a genericconfiguration.
Modifiable : Indicates if the parameter is modifiable at the OMC-R.
Parameter Access : Indicates where the parameter is accessible at the
OMC-R.
External Comments : Specific information, when necessary, relatedto the parameter.
8 / 492 3BK 21253 AAAA TQZZA Ed.07
2 VGCS 0&M Parameters
2 VGCS 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 9 / 492
2 VGCS 0&M Parameters
2.1 Site (CAE)
2.1.1 (ExternalTarget-VGCSLinkWarnLevel) -(ExternalTarget-VGCSLinkWarnLevel)
Alcatel ExternalTarget-VGCSLinkWarnLevelParameter Name
Logical Name ExternalTarget-VGCSLinkWarnLevel
Definition This parameter defines the detail level for the warnings related to theVGCS adjacencies targeting external cells
Coding rules 0: None; 1: Cell level; 2: Adjacency level.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 2 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access RNUSM / VGCS / User Preferences
External Comment —
10 / 492 3BK 21253 AAAA TQZZA Ed.07
2 VGCS 0&M Parameters
2.1.2 (OwnTarget-VGCSLinkWarnLevel) -(OwnTarget-VGCSLinkWarnLevel)
Alcatel OwnTarget-VGCSLinkWarnLevelParameter Name
Logical Name OwnTarget-VGCSLinkWarnLevel
Definition This parameter defines the detail level for the warnings related to theVGCS adjacencies targeting own cells
Coding rules 0: None; 1: Cell level; 2: Adjacency level.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 2 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access RNUSM / VGCS / User Preferences
External Comment —
3BK 21253 AAAA TQZZA Ed.07 11 / 492
2 VGCS 0&M Parameters
2.1.3 (VGCS) - (VGCS-Char)
Alcatel VGCSParameter Name
Logical Name VGCS-Char
Definition This parameter allows to characterise an adjacency to VGCS type.
Coding rules 0 = False = No VGCS link on the adjacency 1 = True = VGCS link onthe adjacency
Mandatory rules Can only be set to true if neither the source cell, neither the targetcell is a 850/ 1900 cell. Can only be set to true (VGCS link on theadjacency) if the target cell is not a GAN cell.
Recommended rules —
Category Site (CAE)
Type List of numbers
SubSystem OMC
Instance adj
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Adjacency / 2G
External Comment —
12 / 492 3BK 21253 AAAA TQZZA Ed.07
3 UMTS 0&M Parameters
3 UMTS 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 13 / 492
3 UMTS 0&M Parameters
3.1 Site (CAE)
3.1.1 (3G PLMN Name) - (Cell-3G-PLMN-Name)
Alcatel 3G PLMN NameParameter Name
Logical Name Cell-3G-PLMN-Name
Definition Friendly name of the 3G PLMN to which the related cell belongs.
Coding rules Allowed characters: a-z,A-Z,0-9,-,_, and spaces but not in thebeginning/ending of the string.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance cell3G
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit External 3G Cell/General parameters
External Comment The 3G PLMN name is one of the own or foreign PLMN namesshown in the network parameter view of the OMC corresponding tothe (MCC-3G,MNC-3G) of the cell.
14 / 492 3BK 21253 AAAA TQZZA Ed.07
3 UMTS 0&M Parameters
3.1.2 (Adjacency name) - (Adjacency-Name-3G)
Alcatel Adjacency nameParameter Name
Logical Name Adjacency-Name-3G
Definition This parameter contains a user-friendly name to identify an 2G ->3Gadjacency relationship.
Coding rules This parameter is a character string built from the source andtarget cell names. 0 to 15 characters string. Allowed characters:a-z,A-Z,0-9,-,_, and spaces but not in the beginning/ending of thestring. *: default = empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance adj2G3G
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Adjacencies / 2G ->3G Adjacencies
External Comment —
3BK 21253 AAAA TQZZA Ed.07 15 / 492
3 UMTS 0&M Parameters
3.1.3 (Adjacency type) - (Adjacency-type-3G)
Alcatel Adjacency typeParameter Name
Logical Name Adjacency-type-3G
Definition This parameter defines the type of an 2G to 3G adjacencyrelationship: ’Handover’.
Coding rules 0 : ’handover’; 1 : ’reselection’; 2 : ’both’ (i.e. both HO & reselection).In B9 only the ’0’ value (handover) is allowed.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance adj2G3G
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Adjacencies / 2G ->3G Adjacencies
External Comment —
16 / 492 3BK 21253 AAAA TQZZA Ed.07
3 UMTS 0&M Parameters
3.1.4 (Cell name) - (Cell-Name-3G)
Alcatel Cell nameParameter Name
Logical Name Cell-Name-3G
Definition This parameter contains a user-friendly name for the external 3GCell (which is local to the OMC).
Coding rules String of 32 Characters. Allowed characters: a-z,A-Z,0-9,-,_, andspaces but not in the beginning/ending of the string. *: default:empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance cell3G
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit External 3G Cell/General parameters
External Comment —
3BK 21253 AAAA TQZZA Ed.07 17 / 492
3 UMTS 0&M Parameters
3.1.5 (Local 3G Cell Identity) - (Local-3G-Cell-Identity)
Alcatel Local 3G Cell IdentityParameter Name
Logical Name Local-3G-Cell-Identity
Definition This parameter contains the Local Cell Identifier of a 3G cell in aPLMN.
Coding rules binary value on 28 bits
Mandatory rules The Local Cell Identifier must be unique in a PLMN (MCC/MNC)
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell3G
Unit Minimum Maximum DefaultValue
– 0 268435455 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit External 3G Cell/General parameters
External Comment —
18 / 492 3BK 21253 AAAA TQZZA Ed.07
4 LCS 0&M Parameters
4 LCS 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 19 / 492
4 LCS 0&M Parameters
4.1 Site (CAE)
4.1.1 (LATITUDE) - (LCS-Latitude)
Alcatel LATITUDEParameter Name
Logical Name LCS-Latitude
Definition This parameter indicates the latitude of the cell for LCS.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Real
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
degree -90 90 0
Modifiable OMC Changes: PRC & SC RNO Changes: –
Parameter Access Edit Cell / LCS
External Comment 6 digits after the dot are displayed at the most.
20 / 492 3BK 21253 AAAA TQZZA Ed.07
4 LCS 0&M Parameters
4.1.2 (LONGITUDE) - (LCS-Longitude)
Alcatel LONGITUDEParameter Name
Logical Name LCS-Longitude
Definition This parameter indicates the longitude of the cell for LCS.
Coding rules –
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Real
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
degree -180 180 0
Modifiable OMC Changes: PRC & SC RNO Changes: –
Parameter Access Edit Cell / LCS
External Comment 6 digits after the dot are displayed at the most.
3BK 21253 AAAA TQZZA Ed.07 21 / 492
4 LCS 0&M Parameters
4.1.3 (nsei) - (BSS_NSEI)
Alcatel nseiParameter Name
Logical Name BSS_NSEI
Definition This parameter identifies the nse associated to the pilot GPU (GPUhandling the BSS reset procedure) which is also the GPU supportingSMLC function for the BSS..
Coding rules The parameter is set to 0 when no pilot GPU is identified for this BSS.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
- 0 65535 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show LCS Nsei
External Comment –
22 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5 GSM 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 23 / 492
5 GSM 0&M Parameters
5.1 Network (CDE)
5.1.1 (—) - (Routine-Test-Trigger-Time)
Alcatel —Parameter Name
Logical Name Routine-Test-Trigger-Time
Definition This parameter fixes, in a coded way, the time at which BSC shalltrigger the switch routine tests. This time is relative to the BSC time,which uses only GMT (Greenwich meridian Time). It allows, to triggerthe routine tests during night time whatever the geographic locationof the BSC. It also allows preventing completely the execution ofthese routine tests. It is only valid for BSC G2.
Coding rules 0 : routing test never executed n: routing test executed every nminutes. (with 0<n<232) 255 = -1 routing test executed at 1AM GMT254 = -2 routing test executed at 2AM GMT .. 233 = -23 routing testexecuted at 11 PM GMT 232 = -24 routing test executed at 12 PMGMT
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 255
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
24 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.2 (—) - (TRAU-Law)
Alcatel —Parameter Name
Logical Name TRAU-Law
Definition Speech coding law.
Coding rules 0 : -law; 1 : A-law
Mandatory rules –
Recommended rules –
Category Network (CDE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 25 / 492
5 GSM 0&M Parameters
5.1.3 (Foreign / PLMN 1 Mobile Country Code) - (ForeignMCC[1])
Alcatel Foreign / PLMN 1 Mobile Country CodeParameter Name
Logical Name ForeignMCC[1]
Definition Mobile Country Code of the first foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[1] = empty string, then ForeignMCC[1]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
26 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.4 (Foreign / PLMN 1 Mobile Network Code) - (ForeignMNC[1])
Alcatel Foreign / PLMN 1 Mobile Network CodeParameter Name
Logical Name ForeignMNC[1]
Definition Mobile Network Code of the first foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[1] = empty string, then ForeignMNC[1]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
3BK 21253 AAAA TQZZA Ed.07 27 / 492
5 GSM 0&M Parameters
5.1.5 (Foreign / PLMN 1 - PLMN Name) - (ForeignPLMN-Name[1])
Alcatel Foreign / PLMN 1 - PLMN NameParameter Name
Logical Name ForeignPLMN-Name[1]
Definition Friendly name of the first foreign PLMN
Coding rules String of 32 characters
Mandatory rules If the inter PLMN HO feature is not allowed, the foreignPLMN-Name[1]is set to empty string If ForeignPLMN-name[1] = empty string, thenForeignMCC[1]=-1 and OwnMNC[1]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
28 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.6 (Foreign / PLMN 2 Mobile Country Code) - (ForeignMCC[2])
Alcatel Foreign / PLMN 2 Mobile Country CodeParameter Name
Logical Name ForeignMCC[2]
Definition Mobile Country Code of the second foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[2] = empty string, then ForeignMCC[2]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 29 / 492
5 GSM 0&M Parameters
5.1.7 (Foreign / PLMN 2 Mobile Network Code) - (ForeignMNC[2])
Alcatel Foreign / PLMN 2 Mobile Network CodeParameter Name
Logical Name ForeignMNC[2]
Definition Mobile Network Code of the second foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[2] = empty string, then ForeignMNC[2]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
30 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.8 (Foreign / PLMN 2 PLMN Name) - (ForeignPLMN-Name[2])
Alcatel Foreign / PLMN 2 PLMN NameParameter Name
Logical Name ForeignPLMN-Name[2]
Definition Friendly name of the second foreign PLMN
Coding rules String of 32 characters
Mandatory rules If the inter PLMN HO feature is not allowed, the foreignPLMN-Name[2]is set to empty string If ForeignPLMN-name[2] = empty string, thenForeignMCC[2]=-1 and ForeignMNC[2]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 31 / 492
5 GSM 0&M Parameters
5.1.9 (Foreign / PLMN 3 Mobile Country Code) - (ForeignMCC[3])
Alcatel Foreign / PLMN 3 Mobile Country CodeParameter Name
Logical Name ForeignMCC[3]
Definition Mobile Country Code of the third foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[3] = empty string, then ForeignMCC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
32 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.10 (Foreign / PLMN 3 Mobile Network Code) - (ForeignMNC[3])
Alcatel Foreign / PLMN 3 Mobile Network CodeParameter Name
Logical Name ForeignMNC[3]
Definition Mobile Network Code of the third foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[3] = empty string, then ForeignMNC[3]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
3BK 21253 AAAA TQZZA Ed.07 33 / 492
5 GSM 0&M Parameters
5.1.11 (Foreign / PLMN 3 PLMN Name) - (ForeignPLMN-Name[3])
Alcatel Foreign / PLMN 3 PLMN NameParameter Name
Logical Name ForeignPLMN-Name[3]
Definition Friendly name of the third foreign PLMN
Coding rules String of 32 characters
Mandatory rules If the inter PLMN HO feature is not allowed, the foreignPLMN-Name[3]is set to empty string If ForeignPLMN-name[3] = empty string, thenForeignMCC[3]=-1 and ForeignMNC[3]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
34 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.12 (Foreign / PLMN 4 Mobile Network Code) - (ForeignMNC[4])
Alcatel Foreign / PLMN 4 Mobile Network CodeParameter Name
Logical Name ForeignMNC[4]
Definition Mobile Network Code of the fourth foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[4] = empty string, then ForeignMNC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
3BK 21253 AAAA TQZZA Ed.07 35 / 492
5 GSM 0&M Parameters
5.1.13 (Foreign / PLMN 4 PLMN Name) - (ForeignPLMN-Name[4])
Alcatel Foreign / PLMN 4 PLMN NameParameter Name
Logical Name ForeignPLMN-Name[4]
Definition Friendly name of the fourth foreign PLMN
Coding rules String of 32 characters
Mandatory rules If the inter PLMN HO feature is not allowed, the foreignPLMN-Name[3]is set to empty string If ForeignPLMN-name[4] = empty string, thenForeignMCC[4]=-1 and ForeignMNC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
36 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.14 (Own / PLMN 1 Mobile Country Code) - (OwnMCC[1])
Alcatel Own / PLMN 1 Mobile Country CodeParameter Name
Logical Name OwnMCC[1]
Definition Mobile Country Code of the first own PLMN
Coding rules —
Mandatory rules OwnMCC[1] shall be different from dummy (-1)
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 999 999
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 37 / 492
5 GSM 0&M Parameters
5.1.15 (Own / PLMN 1 Mobile Network Code) - (OwnMNC[1])
Alcatel Own / PLMN 1 Mobile Network CodeParameter Name
Logical Name OwnMNC[1]
Definition Mobile Network Code of the first own PLMN
Coding rules —
Mandatory rules OwnMNC[1] shall be different from dummy (-1).
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 99 or 999 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
38 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.16 (Own / PLMN 1 PLMN name) - (OwnPLMN-Name[1])
Alcatel Own / PLMN 1 PLMN nameParameter Name
Logical Name OwnPLMN-Name[1]
Definition Friendly name of the first own PLMN.
Coding rules String of 32 characters
Mandatory rules Shall be different from an empty string
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 39 / 492
5 GSM 0&M Parameters
5.1.17 (Own / PLMN 2 - Mobile Country Code) - (OwnMCC[2])
Alcatel Own / PLMN 2 - Mobile Country CodeParameter Name
Logical Name OwnMCC[2]
Definition Mobile Country Code of the second own PLMN
Coding rules -1 corresponds to the dummy value.
Mandatory rules If OwnPLMN-name[2] = empty string, then OwnMCC[2]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
40 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.18 (Own / PLMN 2 Mobile Network Code) - (OwnMNC[2])
Alcatel Own / PLMN 2 Mobile Network CodeParameter Name
Logical Name OwnMNC[2]
Definition Mobile Network Code of the second own PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If OwnPLMN-name[2] = empty string, then OwnMNC[2]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
3BK 21253 AAAA TQZZA Ed.07 41 / 492
5 GSM 0&M Parameters
5.1.19 (Own / PLMN 2 PLMN name) - (OwnPLMN-Name[2])
Alcatel Own / PLMN 2 PLMN nameParameter Name
Logical Name OwnPLMN-Name[2]
Definition Friendly name of the second own PLMN
Coding rules String of 32 characters
Mandatory rules If the multi PLMN feature is not allowed, OwnPLMN-Name[2] = empystring If OwnPLMN name[2] = empty string, then OwnMCC[2]=-1and OwnMNC[2]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
42 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.20 (Own / PLMN 3 - Mobile Country Code) - (OwnMCC[3])
Alcatel Own / PLMN 3 - Mobile Country CodeParameter Name
Logical Name OwnMCC[3]
Definition Mobile Country Code of the third own PLMN
Coding rules 1 corresponds to the dummy value
Mandatory rules If OwnPLMN-name[3] = empty string, then OwnMCC[3]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 43 / 492
5 GSM 0&M Parameters
5.1.21 (Own / PLMN 3 Mobile Network Code) - (OwnMNC[3])
Alcatel Own / PLMN 3 Mobile Network CodeParameter Name
Logical Name OwnMNC[3]
Definition Mobile Network Code of the third own PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If OwnPLMN-name[3] = empty string, then OwnMNC[3]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
44 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.22 (Own / PLMN 3 / PLMN name 3) - (OwnPLMN-Name[3])
Alcatel Own / PLMN 3 / PLMN name 3Parameter Name
Logical Name OwnPLMN-Name[3]
Definition Friendly name of the third own PLMN
Coding rules String of 32 characters
Mandatory rules If the multi PLMN feature is not allowed, the OwnPLMN-Name[3]is set to empy empty If OwnPLMN name[3] = empty string, thenOwnMCC[3]=-1 and OwnMNC[3]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 45 / 492
5 GSM 0&M Parameters
5.1.23 (Own / PLMN 4 - Mobile Country Code) - (OwnMCC[4])
Alcatel Own / PLMN 4 - Mobile Country CodeParameter Name
Logical Name OwnMCC[4]
Definition Mobile Country Code of the fourth own PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If OwnPLMN-name[4] = empty string, then OwnMCC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
46 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.1.24 (Own / PLMN 4 Mobile Network Code) - (OwnMNC[4])
Alcatel Own / PLMN 4 Mobile Network CodeParameter Name
Logical Name OwnMNC[4]
Definition Mobile Network Code of the fourth own PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If OwnPLMN-name[4] = empty string, then OwnMNC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 99 or 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
3BK 21253 AAAA TQZZA Ed.07 47 / 492
5 GSM 0&M Parameters
5.1.25 (Own / PLMN 4 PLMN name) - (OwnPLMN-Name[4])
Alcatel Own / PLMN 4 PLMN nameParameter Name
Logical Name OwnPLMN-Name[4]
Definition Friendly name of the fourth own PLMN
Coding rules String of 32 characters
Mandatory rules If the multi PLMN feature is not allowed, the OwnPLMN-Name[4]is set to empy string If OwnPLMN name[4] = empty string, thenOwnMCC[4]=-1 and OwnMNC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none Empty string
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
48 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2 Site (CAE)
5.2.1 (—) - (Adjacency-Type)
Alcatel —Parameter Name
Logical Name Adjacency-Type
Definition This parameter defines the type of an adjacency relationship: either’Handover’, ’Reselection’ or ’both HO & Reselection’.
Coding rules 0 : ’handover’ if HO-Char= True and Resel-Char= False 1 :’reselection’ if Resel-Char= True and HO-Char=False 2 : ’both’ (i.e.both HO & reselection) if HO-Char= True and Resel-Char= True
Mandatory rules Only the value 0 (Handover) is allowed when the target cell is a GANcell (as reselection cannot be used on the adjacency).
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance adj
Unit Minimum Maximum DefaultValue
- 0 2 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Adjacency / 2G
External Comment –
3BK 21253 AAAA TQZZA Ed.07 49 / 492
5 GSM 0&M Parameters
5.2.2 (—) - (ARFN (CU))
Alcatel —Parameter Name
Logical Name ARFN (CU)
Definition This parameter gives the Absolute Radio Frequency ChannelNumber configured on a CU
Coding rules -1 : dummy value
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance CU
Unit Minimum Maximum DefaultValue
- -1 1023 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
50 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.3 (—) - (ARFN-Set)
Alcatel —Parameter Name
Logical Name ARFN-Set
Definition List of Absolute Radio Frequency Channel Number defined in theFrequency Hopping Sequence
Coding rules ARFN-Set is a list of up to 64 ARFCN. Each element is a numbercomprised between 0 and 1023.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem BSC
Instance FHS
Unit Minimum Maximum DefaultValue
- 0 1023 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / Frequencies
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 51 / 492
5 GSM 0&M Parameters
5.2.4 (—) - (ATCA-Shelf-Number)
Alcatel —Parameter Name
Logical Name ATCA-Shelf-Number
Definition This parameter gives the Shelf number of the ATCA Shelf
Coding rules 0: no ATCA Shelf; 1..15: Shelf number of the ATCA Shelf in the rack.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 15 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
52 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.5 (—) - (Atermux-Number-perMT120)
Alcatel —Parameter Name
Logical Name Atermux-Number-perMT120
Definition This parameter allows the BSC/MT120 mapping
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance MT120 board
Unit Minimum Maximum DefaultValue
- 1 48 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 53 / 492
5 GSM 0&M Parameters
5.2.6 (—) - (Ater-Usage-State)
Alcatel —Parameter Name
Logical Name Ater-Usage-State
Definition This parameter defines the telecom usage of an Ater ressource.
Coding rules 0: Idle-TCH 2: Busy-TCH 3: Unavailable 4:Locked 8: Busy-PDCH9: Idle-PDCH
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance AterMux
Unit Minimum Maximum DefaultValue
- 0 9 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / DTC Report
External Comment State description. IDLE-TCH: This state refers to an Ater resourcedefined to carry CS traffic (ACH) but currently not used. BUSY-TCH:This state refers to an Ater resource defined to carry CS traffic(ACH) and currently used. UNAVAILABLE: This state refers to anAter resource defined to carry signalling link (N7, Q1) such as GSL,Alarms octet, X25, etc. LOCKED: This state refers to is used whenan Ater resource which is locked. BUSY-PDCH: This state refers toan Ater resource defined to carry PSCS traffic (GCH) and currentlyused. IDLE-PDCH: This state refers to an Ater resource defined tocarry PS traffic (GCH) but currently not used. ELSE: This case refersto an Ater Resource which is unknown.
54 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.7 (—) - (BCCH-BAND)
Alcatel —Parameter Name
Logical Name BCCH-BAND
Definition This parameter indicates the band the BCCH frequency belongs to.
Coding rules 0: PGSM (GSM 900), 1: DCS 1800, 2: EGSM, 3: DCS 1900, 4: notused, 5: not used, 6: GSM 850
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 6 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 55 / 492
5 GSM 0&M Parameters
5.2.8 (—) - (BCCH-Freq-Used)
Alcatel —Parameter Name
Logical Name BCCH-Freq-Used
Definition This flag indicates whether the ARFCN assigned to the CU is aBCCH frequency or not.
Coding rules 0 : the ARFCN assigned to the CU is not a BCCH frequency, 1 : theARFCN assigned to the CU is a BCCH frequency
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance CU
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
56 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.9 (—) - (BIE-Abis-CRC)
Alcatel —Parameter Name
Logical Name BIE-Abis-CRC
Definition This parameter allows to Enable/Disable the CRC4 check on an Abisinterface from BIUA terminal
Coding rules 0: CRC4 check off (Disable); 1: CRC4 check on (Enable)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment When set by BIUA operator, it acts as a patch on the current BIUAsettings. However, when BSC updates, e.g. in case of extension,BIUA settings (cf Abis-CRC BOP parameter), this BIE-Abis-CRC flagis overwritten. This parameter is valid only for G2 BSC.
3BK 21253 AAAA TQZZA Ed.07 57 / 492
5 GSM 0&M Parameters
5.2.10 (—) - (BSC-IP-BASEB-ADDRESS)
Alcatel —Parameter Name
Logical Name BSC-IP-BASEB-ADDRESS
Definition This parameter gives the local external IP subnet address (B) thatuses the left switching plan of the BSC Evolution.
Coding rules String of 15 Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution and for TDM only.
58 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.11 (—) - (BSC-IP-BASEC-ADDRESS)
Alcatel —Parameter Name
Logical Name BSC-IP-BASEC-ADDRESS
Definition This parameter gives the local external IP subnet address (C) thatuses the right switching plan of the BSC Evolution.
Coding rules String of 15 Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution and for TDM only.
3BK 21253 AAAA TQZZA Ed.07 59 / 492
5 GSM 0&M Parameters
5.2.12 (—) - (BSC-MCC)
Alcatel —Parameter Name
Logical Name BSC-MCC
Definition Mobile Country Code of the PLMN associated to the BSC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 999 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
60 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.13 (—) - (BSC-MNC)
Alcatel —Parameter Name
Logical Name BSC-MNC
Definition Mobile Network Code of the PLMN associated to the BSC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 999 or 99 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Depending on the network, 2 or 3 digits MNC are allowed. MNCsuch as yz or Fyz correspond to a 2 digits MNC (y, z = 0..9). (Fbinary coded 1111) MNC such as xyz correspond to a 3 digits MNC(x = 0..9).
3BK 21253 AAAA TQZZA Ed.07 61 / 492
5 GSM 0&M Parameters
5.2.14 (—) - (BSC-Name-perMT120)
Alcatel —Parameter Name
Logical Name BSC-Name-perMT120
Definition BSC Friendly name per MT120
Coding rules String of 30 ASCII Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance MT120 board
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
62 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.15 (—) - (BscNodeId-perMT120)
Alcatel —Parameter Name
Logical Name BscNodeId-perMT120
Definition BSC identifier per MT120, unique on the customer network.
Coding rules Coded on 32 bits.
Mandatory rules In any case the BSC Node ID shall be also valued at OMC level.In case the TC is managed by several OMC, the value of theBscNodeId must be unique for the whole Network (at least mustallow unambiguous BSC identification on every OMC).
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance MT120 board
Unit Minimum Maximum DefaultValue
- 0 2**31 -1 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Changeable from ’TC NEM’
3BK 21253 AAAA TQZZA Ed.07 63 / 492
5 GSM 0&M Parameters
5.2.16 (—) - (BscNodeId-perTCSL)
Alcatel —Parameter Name
Logical Name BscNodeId-perTCSL
Definition BSC identifier per TCSL, unique on the customer network.
Coding rules Coded on 32 bits.
Mandatory rules In any case the BSC Node ID shall be also valued at OMC level.In case the TC is managed by several OMC, the value of theBscNodeId must be unique for the whole Network (at least mustallow unambiguous BSC identification on every OMC).
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance TCSL
Unit Minimum Maximum DefaultValue
- 0 2**31 -1 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
64 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.17 (—) - (BSC-OML-IP-Address)
Alcatel —Parameter Name
Logical Name BSC-OML-IP-Address
Definition External IP address of the CCP on which the OML is mapped
Coding rules String of 15 Characters. Coded on 32 bits; eg: 255.255.255.255coded FFFFFFFF
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance OML
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 65 / 492
5 GSM 0&M Parameters
5.2.18 (—) - (BSC-OML-Port-Number)
Alcatel —Parameter Name
Logical Name BSC-OML-Port-Number
Definition OML Port number BSC side
Coding rules —
Mandatory rules Each BSC-OML-Port-Number must be unique in a BSC
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance OML
Unit Minimum Maximum DefaultValue
- 1024 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
66 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.19 (—) - (BSC-OML-TID)
Alcatel —Parameter Name
Logical Name BSC-OML-TID
Definition OML Termination identifier BSC side
Coding rules —
Mandatory rules Each BSC-OML-TID must be unique in a BSC.
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance OML
Unit Minimum Maximum DefaultValue
- 0 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 67 / 492
5 GSM 0&M Parameters
5.2.20 (—) - (BSS_ID (MFS))
Alcatel —Parameter Name
Logical Name BSS_ID (MFS)
Definition This parameter gives a unique identification of a BSS.
Coding rules step of one
Mandatory rules BSS-Id (MFS) = BSS-Id (BSC)
Recommended rules –
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSS
Unit Minimum Maximum DefaultValue
- 1 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
68 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.21 (—) - (BSS-Id (BSC))
Alcatel —Parameter Name
Logical Name BSS-Id (BSC)
Definition This parameter gives a unique identification of a BSS.
Coding rules step of one
Mandatory rules BSS-Id (MFS) = BSS-Id (BSC)
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
- 1 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 69 / 492
5 GSM 0&M Parameters
5.2.22 (—) - (BTS-Identifier-Change)
Alcatel —Parameter Name
Logical Name BTS-Identifier-Change
Definition This flag indicates if the BSC qmux adress shall be the reference incase of discrepancy. It is computed by the BSC SW.
Coding rules 0: No: no check has to be performed. 1: Yes: In case of discrepancybetween BSC and BTS address, the BTS address shall be modifiedtaking as reference the BSC one.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
70 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.23 (—) - (BTS-TransMode)
Alcatel —Parameter Name
Logical Name BTS-TransMode
Definition Transport mode of the BTS
Coding rules 1: TDM; 2: IP unframed; 3: IP framed; 4: IPoverEthernet
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 4 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Deduced by BSC from the Abis transport mode
3BK 21253 AAAA TQZZA Ed.07 71 / 492
5 GSM 0&M Parameters
5.2.24 (—) - (Channel-Type)
Alcatel —Parameter Name
Logical Name Channel-Type
Definition Channel configuration of a TRX timeslot
Coding rules 0: BCC: main BCCH (FCCH*+SCH+BCCH+CCCH) ; 1: CBC: maincombined BCCH (main BCCH+SDCCH/4+SACCH/4); 2 : CCH =BCCH + CCCH ; 3: SDD: dyn sdcch (SDCCH/8 or TCH)) ; 4: SDC:static sdcch (SDCCH/8+SACCH/8) ; 5:TCH ; 6: FR TCH (obsolete) ;7: DR TCH (obsolete) ; 9:CBH: main combined BCCH with CBCH:FCC ;12:SDH:SDCCH/7 +SACCH/7+CBCH ; 255 :idle
Mandatory rules SDD channel type allowed for B8 and later cells; CCH channeltype allowed for B10 and later cells. If channel type = 2 (CCH) isconfigured the frequency usage of the TS shall be non-hopping andequal to the BCCH ARFCN
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRX-TS
Unit Minimum Maximum DefaultValue
- 0 255 5
Modifiable OMC Changes: PRC only RNO Changes: CHC
Parameter Access Edit Cell / Radio Channel Config / Timeslot Configuration
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
72 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.25 (—) - (CRC4-ATM)
Alcatel —Parameter Name
Logical Name CRC4-ATM
Definition This parameter indicates whether Cyclic Redundancy Checkalgorithm (for improved data integrity and bit error observations ofAtermux traffic) is used or not.
Coding rules 0 : CRC check off; 1 : CRC check on
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance AterMux
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 73 / 492
5 GSM 0&M Parameters
5.2.26 (—) - (DTC-Telecom-Function)
Alcatel —Parameter Name
Logical Name DTC-Telecom-Function
Definition This parameter gives the Telecom Function supported by a givenDTC.
Coding rules 0 : A-trunk only; 2 : slh-l2-mtp (N7 layers 1 to 3); 3 : TCH-RM; 4 :bssap-sccp-gprsap (N7 layers 4 to 7 and GPRS signalling layers 4to 7), 5 : gsl (GPRS signalling layers 1 to 3)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance DTC
Unit Minimum Maximum DefaultValue
- 0 5 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
74 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.27 (—) - (EXTERNAL_ROUTER_SUBNET_B)
Alcatel —Parameter Name
Logical Name EXTERNAL_ROUTER_SUBNET_B
Definition This parameter gives the router IP address to be used by the BSCfor the subnet B (when in ’2 LAN’ topology).
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution.
3BK 21253 AAAA TQZZA Ed.07 75 / 492
5 GSM 0&M Parameters
5.2.28 (—) - (EXTERNAL_ROUTER_SUBNET_C)
Alcatel —Parameter Name
Logical Name EXTERNAL_ROUTER_SUBNET_C
Definition This parameter gives the router IP address to be used by the BSCfor the subnet C (when in ’2 LAN’ topology).
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution.
76 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.29 (—) - (F-bit-Length)
Alcatel —Parameter Name
Logical Name F-bit-Length
Definition This parameter identifies the length (i.e. number of bits) of theadditional Far end info bits (F-bits) on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 8 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 77 / 492
5 GSM 0&M Parameters
5.2.30 (—) - (F-bit-Startbit)
Alcatel —Parameter Name
Logical Name F-bit-Startbit
Definition This parameter identifies the startbit of the additional Far end infobits (F-bits) on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 7 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is not used for BSC Evolution
78 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.31 (—) - (F-bit-TS-Number)
Alcatel —Parameter Name
Logical Name F-bit-TS-Number
Definition This parameter identifies the timeslot on Abis which carries theadditional Far end info bits (F-bits).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 31 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 79 / 492
5 GSM 0&M Parameters
5.2.32 (—) - (Inactive-Frequency-List)
Alcatel —Parameter Name
Logical Name Inactive-Frequency-List
Definition This parameter defines the list of inactive frequency usage for 8timeslots which can be switched on the active configuration if theAlternative Configuration function has been required by the operator
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem OMC
Instance TRX
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access —
External Comment This list is computed by a dedicated Java script
80 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.33 (—) - (Inactive-Hopping-Type)
Alcatel —Parameter Name
Logical Name Inactive-Hopping-Type
Definition This parameter defines the alternative hoppingType that can beswitched on the active configuration if the Alternative Configurationnhas been required by the operator.
Coding rules 0 : non hopping (NH), 1 : constraint hopping (BBH), 2 : free hopping(RH), 3 : non hopping / free hopping (NH/RH) 255: unknown.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 255 255
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access —
External Comment This list is computed by a dedicated Java script
3BK 21253 AAAA TQZZA Ed.07 81 / 492
5 GSM 0&M Parameters
5.2.34 (—) - (IP-ETHERNET-TOPOLOGY)
Alcatel —Parameter Name
Logical Name IP-ETHERNET-TOPOLOGY
Definition This parameter indicates if 2 LAN topology (with RIP protocol) or 1LAN topology (without RIP protocol) is used by the BSC in IP overEthernet case (i.e. IP-EXTRACTION-POINT = 0).
Coding rules 0: "1 LAN" without RIP (default value) 1: "2 LAN" with RIP.
Mandatory rules —
Recommended rules 1LAN without RIP is the recommended value when installing a B10Mx BSC with IP O&M over Ethernet
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
82 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.35 (—) - (LIU-Shelf-Number)
Alcatel —Parameter Name
Logical Name LIU-Shelf-Number
Definition This parameter gives the Shelf number of the LIU Shelf
Coding rules 0: no LIU Shelf; 1..15: Shelf number of the LIU Shelf in the rack.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 15 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 83 / 492
5 GSM 0&M Parameters
5.2.36 (—) - (Load-Win-16K-satellite)
Alcatel —Parameter Name
Logical Name Load-Win-16K-satellite
Definition This parameter defines the window size for loading BTS in case of16K satellite link.
Coding rules 3
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 2 16 3
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
84 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.37 (—) - (Load-Win-16K-terrestrial)
Alcatel —Parameter Name
Logical Name Load-Win-16K-terrestrial
Definition This parameter defines the window size for loading BTS in case of16K terrestrial link.
Coding rules 2
Mandatory rules –
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 16 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 85 / 492
5 GSM 0&M Parameters
5.2.38 (—) - (Load-Win-64K-satellite)
Alcatel —Parameter Name
Logical Name Load-Win-64K-satellite
Definition This parameter defines the window size for loading BTS in case of64K satellite link.
Coding rules 9
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 16 9
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
86 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.39 (—) - (Load-Win-64K-terrestrial)
Alcatel —Parameter Name
Logical Name Load-Win-64K-terrestrial
Definition This parameter defines the window size for loading BTS in case of64K terrestrial link.
Coding rules 2
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 16 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 87 / 492
5 GSM 0&M Parameters
5.2.40 (—) - (MasterBTS-Id)
Alcatel —Parameter Name
Logical Name MasterBTS-Id
Definition This parameter gives a slave BTS the identification of thecorresponding master BTS.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
88 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.41 (—) - (Max-Power-Per-Sector-DCS (BSC))
Alcatel —Parameter Name
Logical Name Max-Power-Per-Sector-DCS (BSC)
Definition This parameter represents the GMSK output power in DCS band atthe output of the AN (Antenna Network), which the concerned sectorcan provide (after levelling at sector level). It is used by the BSC/BTSfor a cell shared configuration. It lines up the output power of thesecondary sector on the one of the main sector
Coding rules Coded in dBm
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Sector
Unit Minimum Maximum DefaultValue
dBm 0 255 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter does not reflect the attenuation specified throughPWR_adjustment.
3BK 21253 AAAA TQZZA Ed.07 89 / 492
5 GSM 0&M Parameters
5.2.42 (—) - (Max-Power-per-Sector-GSM (BSC))
Alcatel —Parameter Name
Logical Name Max-Power-per-Sector-GSM (BSC)
Definition This parameter represents the GMSK output power in GSM bandat the output of the AN (Antenna Network), which the concernedsector can provide (after levelling at sector level). It is used by theBSC/BTS for a cell shared configuration to line up the output powerof the secondary sector on the one of the main sector
Coding rules Coded in dBm
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Sector
Unit Minimum Maximum DefaultValue
dBm 0 255 -
Modifiable OMC Changes: No RNO Changes: –
Parameter Access —
External Comment This parameter does not reflect the attenuation specified throughPWR_adjustment.
90 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.43 (—) - (MPDCH-Bitmap)
Alcatel —Parameter Name
Logical Name MPDCH-Bitmap
Definition This parameter is the bitmap of the TRX TS used as master PDCHon the BCCH TRX.
Coding rules 0: the TS is not a MPDCH 1: The TS is MPDCH
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Bitmapxd
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 91 / 492
5 GSM 0&M Parameters
5.2.44 (—) - (Nbr-Of-BTSs)
Alcatel —Parameter Name
Logical Name Nbr-Of-BTSs
Definition Number of BTSs controlled by the BSC
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
92 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.45 (—) - (OCXO-Synch-HW-Capability)
Alcatel —Parameter Name
Logical Name OCXO-Synch-HW-Capability
Definition It defines on BTS subsystem the HW capability of clock
Coding rules 0: freeRunning ; 1: pcmSynchronized ; 2:freeRunningAndPcmSynchronizedProvided 3:freeRunningAndPcmAndGpsSynchronizedProvided 255: unknown
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 255
Modifiable OMC Changes: – RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 93 / 492
5 GSM 0&M Parameters
5.2.46 (—) - (OMC-X25-License-Key)
Alcatel —Parameter Name
Logical Name OMC-X25-License-Key
Definition This parameter gives the X.25 license key of the OMC.
Coding rules String of ?? Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment This parameter is not used for BSC Evolution
94 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.47 (—) - (OML-TEI)
Alcatel —Parameter Name
Logical Name OML-TEI
Definition LapD Terminal Endpoint Identifier for the OMU.
Coding rules Always 1.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 95 / 492
5 GSM 0&M Parameters
5.2.48 (—) - (OMU-CPF-name)
Alcatel —Parameter Name
Logical Name OMU-CPF-name
Definition Identification of the OMU_CPF_name
Coding rules String of 32 characters *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
96 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.49 (—) - (PDCH-Group-Bitmap)
Alcatel —Parameter Name
Logical Name PDCH-Group-Bitmap
Definition This parameter is the bitmap of the TRX TS used as slave PDCH onany TRX allowed for PS traffic.
Coding rules 0: the TS is not a PDCH 1: The TS is PDCH
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Bitmapxd
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 97 / 492
5 GSM 0&M Parameters
5.2.50 (—) - (Preserve-Calls)
Alcatel —Parameter Name
Logical Name Preserve-Calls
Definition This flag is used when any TRX definition in the cell has beenchanged, to mark (other) TRXs where the radio channel configurationis unchanged. For the marked TRXs (TRXs for which this flag is setto TRUE), BSC does not force release the calls
Coding rules 1: TRUE: The radio channel configuration is unchanged for this TRX.BSC does not force release the calls 0: FALSE: The radio channelconfiguration is changed for this TRX. BSC performs force callsrelease.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment Since HSDS (High Speed Data Service) introduction, when HSDS isactivated, after each radio definition, BSC performs adjustment of theTRX/RSL mapping. This step is not under OMC control and thereforecan lead to calls release on TRX flagged with Preserve calls.
98 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.51 (—) - (Qmux-Length)
Alcatel —Parameter Name
Logical Name Qmux-Length
Definition This parameter identifies the length (i.e. number of bits) of the Qmuxtimeslot on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 8 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 99 / 492
5 GSM 0&M Parameters
5.2.52 (—) - (Qmux-Startbit)
Alcatel —Parameter Name
Logical Name Qmux-Startbit
Definition This parameter identifies the startbit of the Qmux channel on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 7 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
100 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.53 (—) - (Rach-Catcher)
Alcatel —Parameter Name
Logical Name Rach-Catcher
Definition This flag indicates whether the CU is used, in the context of anextended cell, as a RACH catcher.
Coding rules 0 : CU is not used as RACH catcher; 1 : CU is used as RACH catcher
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem OMC
Instance CU
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 101 / 492
5 GSM 0&M Parameters
5.2.54 (—) - (R-bit-Length)
Alcatel —Parameter Name
Logical Name R-bit-Length
Definition This parameter identifies the length (i.e. number of bits) of the RingControl bits (R-bits) on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 8 none
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment –
102 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.55 (—) - (R-bit-Startbit)
Alcatel —Parameter Name
Logical Name R-bit-Startbit
Definition This parameter identifies the startbit of the Ring Control bits (R-bits)on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 7 none
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 103 / 492
5 GSM 0&M Parameters
5.2.56 (—) - (RSL-TEI)
Alcatel —Parameter Name
Logical Name RSL-TEI
Definition LapD Terminal Endpoint Identifier for the FU.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance FU
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
104 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.57 (—) - (SAPI-RSL)
Alcatel —Parameter Name
Logical Name SAPI-RSL
Definition This parameter contains the Service Access Point Identifiercorresponding to the LadLink RSL
Coding rules 1
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance FU
Unit Minimum Maximum DefaultValue
- 0 255 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 105 / 492
5 GSM 0&M Parameters
5.2.58 (—) - (S-bit-Length)
Alcatel —Parameter Name
Logical Name S-bit-Length
Definition This parameter identifies the length (i.e. number of bits) of the LoopSynchronisation Control bits (S-bits) on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 8 None
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment –
106 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.59 (—) - (S-bit-Startbit)
Alcatel —Parameter Name
Logical Name S-bit-Startbit
Definition This parameter identifies the startbit of the Loop SynchronisationControl bits (S-bits) on Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 7 None
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 107 / 492
5 GSM 0&M Parameters
5.2.60 (—) - (SDCCH-SubTemplate-n-I[1])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[1]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 1TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
108 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.61 (—) - (SDCCH-SubTemplate-n-I[10])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[10]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 10 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 109 / 492
5 GSM 0&M Parameters
5.2.62 (—) - (SDCCH-SubTemplate-n-I[11])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[11]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 11 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
110 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.63 (—) - (SDCCH-SubTemplate-n-I[12])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[12]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 12 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH. Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 111 / 492
5 GSM 0&M Parameters
5.2.64 (—) - (SDCCH-SubTemplate-n-I[13])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[13]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 13 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH. Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
112 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.65 (—) - (SDCCH-SubTemplate-n-I[14])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[14]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 14 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH. Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 113 / 492
5 GSM 0&M Parameters
5.2.66 (—) - (SDCCH-SubTemplate-n-I[15])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[15]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 15 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH. Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
114 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.67 (—) - (SDCCH-SubTemplate-n-I[16])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[16]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 16 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH. Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 115 / 492
5 GSM 0&M Parameters
5.2.68 (—) - (SDCCH-SubTemplate-n-I[2])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[2]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 2 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
116 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.69 (—) - (SDCCH-SubTemplate-n-I[3])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[3]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 3 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 117 / 492
5 GSM 0&M Parameters
5.2.70 (—) - (SDCCH-SubTemplate-n-I[4])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[4]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 4 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
118 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.71 (—) - (SDCCH-SubTemplate-n-I[5])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[5]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 5 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8);"C": CCH; Default value: TRX1/TS0: BCC or CBC ; otherTS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 119 / 492
5 GSM 0&M Parameters
5.2.72 (—) - (SDCCH-SubTemplate-n-I[6])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[6]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 6 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8);"C": CCH; Default value: TRX1/TS0: BCC or CBC ; otherTS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
120 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.73 (—) - (SDCCH-SubTemplate-n-I[7])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[7]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 7 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 121 / 492
5 GSM 0&M Parameters
5.2.74 (—) - (SDCCH-SubTemplate-n-I[8])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[8]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 8 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
122 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.75 (—) - (SDCCH-SubTemplate-n-I[9])
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-n-I[9]
Definition SDCCH sub-template associated to SDCCH templaten corresponding to cell with 9 TRX. List of (I*8)SDCCH-SubTemplate-TRX-TS-channel.
Coding rules empty string:" " ;"b": BCC ; "c": CBC ; "S": SDC ; "D": SDD (dynamicSDCCH/8); "C": CCH; Default value: TRX1/TS0: BCC or CBC ;other TS: empty string.
Mandatory rules The first value of the list (TRX1/TS0) shall be set to BCC or CBC
Recommended rules —
Category Site (CAE)
Type List of references
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- none none see coding rule
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 123 / 492
5 GSM 0&M Parameters
5.2.76 (—) - (SDCCH-SubTemplate-TRX-TS-Channel)
Alcatel —Parameter Name
Logical Name SDCCH-SubTemplate-TRX-TS-Channel
Definition Channel type affected to a TRX-TS in a given SDCCH-Subtemplate
Coding rules empty string b: BCC c: CBC S: SDC D: SDD (dynamic SDCCH/8)C: CCH
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance TRX-TS
Unit Minimum Maximum DefaultValue
- none none empty string
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
124 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.77 (—) - (secondary-sector)
Alcatel —Parameter Name
Logical Name secondary-sector
Definition This parameter defines the secondary sector for a cell shared by2 BTS.
Coding rules The BTS name indexed
Mandatory rules It is the reference of a physical sector. There are many rules to befollowed by this parameter - refer to logical configuration management
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- - - "none"
Modifiable OMC Changes: PRC only RNO Changes: –
Parameter Access Edit Cell / Radio Channel Config / Timeslot Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 125 / 492
5 GSM 0&M Parameters
5.2.78 (—) - (SOLSA_FUNCT_LEVEL(BSC))
Alcatel —Parameter Name
Logical Name SOLSA_FUNCT_LEVEL(BSC)
Definition This parameter describes the SOLSA functional mode taking intoaccount the SOLSA_ENABLED parameter and the type of BTS
Coding rules 0(Limited-disabled): Solsa disabled and BTS not Evolium ;1(Disabled): Solsa disabled and BTS evolium ; 2(Limited) : Solsaenabled and BTS not Evolium ; 3(Simplified): Solsa enabled andBTS Evolium ;
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 3 0
Modifiable OMC Changes: No RNO Changes: –
Parameter Access —
External Comment –
126 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.79 (—) - (SOURCE-CLOCK-PREFERRED)
Alcatel —Parameter Name
Logical Name SOURCE-CLOCK-PREFERRED
Definition This parameter indicates if the TC shall prefer E1 TDM or STM1 forthe source clock selection
Coding rules 1 : E1 TDM ; 2 : STM1 Default value: E1 TDM
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance Transcoder
Unit Minimum Maximum DefaultValue
- 1 2 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 127 / 492
5 GSM 0&M Parameters
5.2.80 (—) - (TC internal mode)
Alcatel —Parameter Name
Logical Name TC internal mode
Definition This parameter gives the internal mode of the transcoder: eitherTCIL or HSI.
Coding rules 0: TCIL 1: HSI Default value: TCIL
Mandatory rules HSI is mandatory for TC NEM remote connection.
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem TC
Instance Transcoder
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
128 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.81 (—) - (TC-HIGH-PATH-TRACE-RECEIVED)
Alcatel —Parameter Name
Logical Name TC-HIGH-PATH-TRACE-RECEIVED
Definition This parameter indicates the high path trace received by the TC inmessages received by a given STM1 TTP.
Coding rules String of 15 characters at maximum.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 129 / 492
5 GSM 0&M Parameters
5.2.82 (—) - (TC-HIGH-PATH-TRACE-TRANSMITTED)
Alcatel —Parameter Name
Logical Name TC-HIGH-PATH-TRACE-TRANSMITTED
Definition This parameter indicates the High path trace string transmitted bya given STM1 TTP.
Coding rules String of 15 characters at maximum. ("A" to "Z", "a" to "z" and "0"to "9") and space allowed at the end; padding character="NUL")/**: default value: The default string value for High path trace is:"TCJ1xxan" Where: xx is the TC rack number a indicates the boardcarrying the section (from 1 to 2) n is the STM1-ITF identifier (from1 to 4)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
130 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.83 (—) - (TC-HW-Config)
Alcatel —Parameter Name
Logical Name TC-HW-Config
Definition This parameter indicates the HW configuration of the TC.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Transcoder
Unit Minimum Maximum DefaultValue
- 2 76 ?
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 131 / 492
5 GSM 0&M Parameters
5.2.84 (—) - (TC-LOW-PATH-TRACE-RECEIVED)
Alcatel —Parameter Name
Logical Name TC-LOW-PATH-TRACE-RECEIVED
Definition This parameter indicates the Low Path Trace received by the TCwithin a STM1 VC12.
Coding rules String of 15 characters maximum
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-VC12
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
132 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.85 (—) - (TC-LOW-PATH-TRACE-TRANSMITTED)
Alcatel —Parameter Name
Logical Name TC-LOW-PATH-TRACE-TRANSMITTED
Definition This parameter indicates the Low Path Trace coded by the TC intransmitted messages within a STM1 VC12
Coding rules String of 15 characters at maximum [("A" to "Z", "a" to "z" and "0" to"9"); space are allowed at the end]
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-VC12
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 133 / 492
5 GSM 0&M Parameters
5.2.86 (—) - (TC-PATH-TRACE-RECEIVED)
Alcatel —Parameter Name
Logical Name TC-PATH-TRACE-RECEIVED
Definition This parameter indicates the Path Trace received by the TC withina STM1 VC12.
Coding rules String of 15 characters at maximum
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-VC12
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
134 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.87 (—) - (TC-PATH-TRACE-TRANSMITTED)
Alcatel —Parameter Name
Logical Name TC-PATH-TRACE-TRANSMITTED
Definition This parameter indicates the Path Trace coded by the TC intransmitted messages within a STM1 VC12
Coding rules String of 15 characters at maximum: Only alphanumeric characters("A" to "Z", "a" to "z" and "0" to "9") are allowed; space are allowedat the end; if the string has less than 15 characters the paddingcharacter is "NUL". If the string is empty, the default value is used:*: default value: TCxxmssddddy where: xx is the TC rack numberm is the shelf number of the MT120 carrying the link ss is the slotnumber of the MT120 carrying the link ddd indicates the type ofinterface: "ATER" for Ater interface "AITF" for A interface y indicatesthe logical number of the interface: 1 for A interface tributary 1; 2 forA interface tributary 2; 3 for A interface tributary 3; 4 for A interfacetributary 4; 5 for Ater interface
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-VC12
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 135 / 492
5 GSM 0&M Parameters
5.2.88 (—) - (TC-SECTION-TRACE-FRAMED-RECEIVED)
Alcatel —Parameter Name
Logical Name TC-SECTION-TRACE-FRAMED-RECEIVED
Definition This parameter indicates the Section trace received bythe TC in messages received by a given STM1 TTP if theTC-SECTION-TRACE-TYPE is 16 bytes framed.
Coding rules String of 15 characters at maximum
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
136 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.89 (—) - (TC-SECTION-TRACE-ONEBYTE-RECEIVED)
Alcatel —Parameter Name
Logical Name TC-SECTION-TRACE-ONEBYTE-RECEIVED
Definition This parameter indicates the Section trace received bythe TC in messages received by a given STM1 TTP if theTC-SECTION-TRACE-TYPE is one byte.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 137 / 492
5 GSM 0&M Parameters
5.2.90 (—) - (TC-SECTION-TRACE-ONEBYTE-TRANSMITTED)
Alcatel —Parameter Name
Logical Name TC-SECTION-TRACE-ONEBYTE-TRANSMITTED
Definition This parameter indicates the Section trace transmitted by a givenSTM1 TTP if the TC-SECTION-TRACE-TYPE is one byte.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- 0 255 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
138 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.91 (—) - (TC-SECTION-TRACE-STRING-TRANSMITTED)
Alcatel —Parameter Name
Logical Name TC-SECTION-TRACE-STRING-TRANSMITTED
Definition This parameter indicates the Section trace string transmitted by agiven STM1 TTP if the TC-SECTION-TRACE-TYPE is 16 bytesframed.
Coding rules String of 15 characters at maximum: Only alphanumeric characters("A" to "Z", "a" to "z" and "0" to "9") are allowed; space are allowedat the end; if the string has less than 15 characters the paddingcharacter is "NUL". If the string is empty, the default value is used:*: default value: "TCxxna" where: xx is the TC rack number n isthe STM1-ITF identifier (from 1 to 4) a indicates the board carryingthe section (from 1 to 2)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 139 / 492
5 GSM 0&M Parameters
5.2.92 (—) - (TC-SECTION-TRACE-TYPE)
Alcatel —Parameter Name
Logical Name TC-SECTION-TRACE-TYPE
Definition This parameter indicates the section trace type to be transmitted by agiven STM1_TTP.
Coding rules 0: the section trace is one byte 1: the section trace is 16 bytes framed
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem TC
Instance STM1-TTP
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
140 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.93 (—) - (Tcsl-IpAddress-BSCside (TC))
Alcatel —Parameter Name
Logical Name Tcsl-IpAddress-BSCside (TC)
Definition IP address of the TCSL link on BSC side (in TC subsystem).
Coding rules String of 15 Characters. Coded on 32 bits; eg: 255.255.255.255coded FFFFFFFF
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance TCSL
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 141 / 492
5 GSM 0&M Parameters
5.2.94 (—) - (Tcsl-IpAddress-TCside (BSC))
Alcatel —Parameter Name
Logical Name Tcsl-IpAddress-TCside (BSC)
Definition IP address of the TCSL link on TC side (in BSC sub-system)..
Coding rules String of 15 Characters. Coded on 32 bits; eg: 255.255.255.255coded FFFFFFFF
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance TC-rack
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
142 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.95 (—) - (Tcsl-Port-BSCside (TC))
Alcatel —Parameter Name
Logical Name Tcsl-Port-BSCside (TC)
Definition Port of TCSL link on BSC side in TC subsystem
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance TCSL
Unit Minimum Maximum DefaultValue
- 59000 61999 59000
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 143 / 492
5 GSM 0&M Parameters
5.2.96 (—) - (Tcsl-Port-TCside (BSC))
Alcatel —Parameter Name
Logical Name Tcsl-Port-TCside (BSC)
Definition Port of TCSL link on TC side (in BSC subsystem).
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TC-rack
Unit Minimum Maximum DefaultValue
- 59000 61999 59000
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
144 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.97 (—) - (TRE-8psk-Capability (BSC))
Alcatel —Parameter Name
Logical Name TRE-8psk-Capability (BSC)
Definition This parameter gives the 8PSK power level that a TRE is capableto emit. This power is relative to the output of the AN (AntennaNetwork) it does not take into account the leveling.
Coding rules The parameter is set to FF(255) if the TRE is not 8PSK capable.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRE
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 145 / 492
5 GSM 0&M Parameters
5.2.98 (—) - (TRE-Gmsk-Capability (BSC))
Alcatel —Parameter Name
Logical Name TRE-Gmsk-Capability (BSC)
Definition This parameter gives the GMSK power level that a TRE is capableto emit.This parameter gives the GMSK power level that a TREis capable to emit. This power is relative to the output of the AN(Antenna Network) it does not take into account the leveling.
Coding rules Coded in dBm.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRE
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
146 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.99 (—) - (TRE-GMSK-Power (BTS))
Alcatel —Parameter Name
Logical Name TRE-GMSK-Power (BTS)
Definition This parameter gives the output power requested by the BSC for acertain TRE, at the output of the AN (Antenna Network.) It existsonly if the feature unbalanced TRX output power is activated on thecorresponding cell.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance FU
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment In case operator has activated the unbalanced TRX output powerfeature, BSC is responsible to define the expected output powerfor every TRE. Operator can know the assigned values throughinnerzone-output-power / outerzone-output-power in HSDS synthesisscreen.
3BK 21253 AAAA TQZZA Ed.07 147 / 492
5 GSM 0&M Parameters
5.2.100 (—) - (TRE-Speech-Coding-Rate)
Alcatel —Parameter Name
Logical Name TRE-Speech-Coding-Rate
Definition This parameter indicates, in case of flexible DR, the speech codingrate to be used on a TRE: Full Rate or Dual Rate.
Coding rules 0 : Full Rate; 1 : Dual Rate
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance TRE
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment –
148 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.101 (—) - (TRX-Number)
Alcatel —Parameter Name
Logical Name TRX-Number
Definition This parameter gives the number of the TRX
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance TRX
Unit Minimum Maximum DefaultValue
- 1 16 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / Timeslot Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 149 / 492
5 GSM 0&M Parameters
5.2.102 (—) - (X25-Connection-Type)
Alcatel —Parameter Name
Logical Name X25-Connection-Type
Definition This parameter is used to distinguish if the X.25 connection goesover a connector or if it comes in via an SPC (Semi PermanentConnection). In the last case the decimal value gives the tuplenumber of R_SP_PATHS were the SPC is defined.
Coding rules 0 = X.25 comes in via a connector; 1 ... # tuples of R_SP_PATHS =X.25 comes in via an SPC identified in R_SP_PATH.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is not used for BSC Evolution
150 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.103 (Abis Connection Type) - (Abis-connection-type)
Alcatel Abis Connection TypeParameter Name
Logical Name Abis-connection-type
Definition This parameter defines the connection type of a certain Abis :terrestrial or via satellite
Coding rules 0:not used; 1: terrestrial connection type ; 2: connection type viasatellite
Mandatory rules Abis connection type cannot be set to ’via satellite’ if Ater connectiontype is ’via satellite’.
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 2 1
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 151 / 492
5 GSM 0&M Parameters
5.2.104 (Abis Name) - (Abis chain/ring name)
Alcatel Abis NameParameter Name
Logical Name Abis chain/ring name
Definition This parameter indicates the character string identifying the Abischain/ring/group.
Coding rules 0 to 15 characters string. Allowed characters: a-z,A-Z,0-9,-,_, andspaces (possible in the beginning/ending of the string.) *: default= empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance Abis
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment —
152 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.105 (Abis Number) - (Abis-Link-Number)
Alcatel Abis NumberParameter Name
Logical Name Abis-Link-Number
Definition This parameter is a logical number to identify the Abis (i.e. chains,rings or groups) in the BSS
Coding rules step of one;
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 431 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 153 / 492
5 GSM 0&M Parameters
5.2.106 (Abis Target Transport Mode) - (Abis-Target-Transport-Mode)
Alcatel Abis Target Transport ModeParameter Name
Logical Name Abis-Target-Transport-Mode
Definition This parameter defines the target transport mode of an Abis in thecontext of E1 mode change.
Coding rules 1:TDM; 2: IP unframed; 3: IP framed; framed, unframed, undefinedat the OMC only.
Mandatory rules On OMC-BSC interface, (un)framed is replaced by IP (un)framed;undefined is replaced by TDM for Abis topology chain. In case of IPFramed Abis, the usable TS must be equal to n to 31.
Recommended rules Usual assumption for the minimum (i.e. the value of n) is not below10.
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 3 none
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment —
154 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.107 (Abis Topology) - (Abis-Topology)
Alcatel Abis TopologyParameter Name
Logical Name Abis-Topology
Definition This parameter indicates the Abis type: chain, ring, group, or IPchain.
Coding rules 0 : chain, 1 : ring, 2 : group; ’IP chain’ only at the OMC
Mandatory rules ’IP chain’ replaced by ’chain’ on OMC-BSC interface
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 155 / 492
5 GSM 0&M Parameters
5.2.108 (Abis Transport Mode) - (Abis-Transport-Mode)
Alcatel Abis Transport ModeParameter Name
Logical Name Abis-Transport-Mode
Definition This parameter defines the transport mode of an Abis.
Coding rules 1:TDM; 2:IP unframed; 3: IP framed; 4: IP Ethernet; framed,unframed, undefined at the OMC only. Default: TDM
Mandatory rules On OMC-BSC interface, (un)framed is replaced by IP (un)framed;undefined is replaced by TDM for Abis topology chain or ring and byIP Ethernet for group topology. In case of IP Framed Abis, the usableTS must be equal to n to 31.
Recommended rules Usual assumption for the minimum (i.e. the value of n) is not below10.
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 4 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment —
156 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.109 (Activation Time) - (auto-inv-time)
Alcatel Activation TimeParameter Name
Logical Name auto-inv-time
Definition activation time of the automatic inventory performed by the OMC
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0:00 23:59 1:00
Modifiable OMC Changes: ENS RNO Changes: –
Parameter Access ENSUSM / Remote Inventory / Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 157 / 492
5 GSM 0&M Parameters
5.2.110 (ACTIVE-STANDBY-MODE) - (ACTIVE-STANDBY-MODE)
Alcatel ACTIVE-STANDBY-MODEParameter Name
Logical Name ACTIVE-STANDBY-MODE
Definition This parameter indicates for each board (OMCP, CCP, TP, MUX)working in active/standby mode which is the current mode.
Coding rules 0: The board is in active mode 1: The board is in standby mode
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BOARD
Unit Minimum Maximum DefaultValue
- 0 1 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS Equipment Main view
External Comment This parameter is valid only for BSC Evolution
158 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.111 (Adjacency name) - (Adjacency-Name)
Alcatel Adjacency nameParameter Name
Logical Name Adjacency-Name
Definition This parameter contains a user-friendly name to identify anadjacency relationship.
Coding rules This parameter is a character string built from the source andtarget cell names. 0 to 15 characters string. Allowed characters:a-z,A-Z,0-9,-,_, and spaces but not in the beginning/ending of thestring. *: default = empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance adj
Unit Minimum Maximum DefaultValue
- none none * (Seecomment)
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Adjacency / 2G
External Comment —
3BK 21253 AAAA TQZZA Ed.07 159 / 492
5 GSM 0&M Parameters
5.2.112 (Administration State) - (IMSI-Trace-Administration-State)
Alcatel Administration StateParameter Name
Logical Name IMSI-Trace-Administration-State
Definition This parameter allows to stop all the IMSI traces of the BSS andto forbid new ones.
Coding rules 0: locked ; 1: unlocked ; 2: shutting-down
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / IMSI Trace Control Parameters
External Comment –
160 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.113 (Allow extended cell) - (Extended-Cell-Support)
Alcatel Allow extended cellParameter Name
Logical Name Extended-Cell-Support
Definition This parameter indicates whether or not the BTS is able to supportan extended cell.
Coding rules 0 : extended cell not supported, 1 : extended cell supported
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show BTS view
External Comment –
3BK 21253 AAAA TQZZA Ed.07 161 / 492
5 GSM 0&M Parameters
5.2.114 (AMR_FR Limit) - (NUMBER_OF_ AMRFR_UNITS)
Alcatel AMR_FR LimitParameter Name
Logical Name NUMBER_OF_ AMRFR_UNITS
Definition Maximum number of objects (cells or TRX) configured for AMRFR,managed by the OMC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment The value of this parameter is defined in "oflcf.in" files. At eachPRC activation/modification, the current number of AMRFR_UNITSis compared with the upper limit. A warning is displayed ifthe current number is above a threshold defined through theWarnThreshold-LimitedFeatures parameter but still below the upperlimit, otherwise the PRC activation is refused. To skip these checks,the upper limit shall be set to 65535.
162 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.115 (AMR_HR Limit) - (NUMBER_OF_ AMRHR_UNITS)
Alcatel AMR_HR LimitParameter Name
Logical Name NUMBER_OF_ AMRHR_UNITS
Definition Maximum number of objects (cells or TRX) configured for AMRHR,managed by the OMC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment The value of this parameter is defined in "oflcf.in" files. At eachPRC activation/modification, the current number of AMRHR_UNITSis compared with the upper limit. A warning is displayed ifthe current number is above a threshold defined through theWarnThreshold-LimitedFeatures parameter but still below the upperlimit, otherwise the PRC activation is refused. To skip these checks,the upper limit shall be set to 65535.
3BK 21253 AAAA TQZZA Ed.07 163 / 492
5 GSM 0&M Parameters
5.2.116 (Antenna diversity) - (Antenna-Diversity)
Alcatel Antenna diversityParameter Name
Logical Name Antenna-Diversity
Definition This flag indicates whether antenna diversity is used or not.
Coding rules 0 : no antenna diversity used; 1: antenna diversity is used.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment –
164 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.117 (Antenna Diversity Capability) - (Antenna-Diversity-Capability)
Alcatel Antenna Diversity CapabilityParameter Name
Logical Name Antenna-Diversity-Capability
Definition This parameter indicates whether or not antenna diversity issupported by the BTS.
Coding rules 0 : antenna diversity not supported, 1 : antenna diversity supported
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BTS
Instance Sector
Unit Minimum Maximum DefaultValue
- 0 1 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 165 / 492
5 GSM 0&M Parameters
5.2.118 (ARFN) - (ARFN (TRX-TS))
Alcatel ARFNParameter Name
Logical Name ARFN (TRX-TS)
Definition This parameter gives the Absolute Radio Frequency ChannelNumber for TRX-TSs which are not hopping
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRX-TS
Unit Minimum Maximum DefaultValue
- 0 1023 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / TRX Configuration
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
166 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.119 (Auto Reject) - (SW-Auto-Reject-Allowed)
Alcatel Auto RejectParameter Name
Logical Name SW-Auto-Reject-Allowed
Definition Through this parameter, the operator allows or not to the BSC, duringa software replacement, to reject autonomously a new software afterthe activation step.
Coding rules 1: True: Auto reject allowed 0: False: Auto reject allowed
Mandatory rules The flag is always set to true
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Software Management / Software Preferences
External Comment The feature that consists to reject the new software in case of BSCrestart overflow is in restriction. The events that can trigger anauto-reject in the BSC are communication trouble between the BSCand the OMC before the operator accept or reject the new software.In such a case, the auto-reject is always triggered. It is the reasonswhy, the flag is always set to true and not changeable from the OMC.
3BK 21253 AAAA TQZZA Ed.07 167 / 492
5 GSM 0&M Parameters
5.2.120 (Available BCCH channel number) - (Nbr-Of-BCCH)
Alcatel Available BCCH channel numberParameter Name
Logical Name Nbr-Of-BCCH
Definition This parameter gives the number of available BCCH channels.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 15 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
168 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.121 (Available static SDCCH) - (Nbr-Of-SDCCH)
Alcatel Available static SDCCHParameter Name
Logical Name Nbr-Of-SDCCH
Definition This parameter gives the number of available static SDCCHsubchannels.
Coding rules The max value of this parameter is: 88 when only one CCCH ispresent in the cell and 176 when 2 CCCH are present in the cell.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 88 0
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 169 / 492
5 GSM 0&M Parameters
5.2.122 (Available TCH) - (Nbr-Of-TCH)
Alcatel Available TCHParameter Name
Logical Name Nbr-Of-TCH
Definition This parameter gives the number of available TCH channels.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 127 0
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
170 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.123 (BCCH Freq. in BA(BCCH)) - (Reflexive-Reselection)
Alcatel BCCH Freq. in BA(BCCH)Parameter Name
Logical Name Reflexive-Reselection
Definition This parameter indicates if the BCCH frequency of the serving cell isincluded in the list of possible frequencies for reselection.
Coding rules 0: False: not included ; 1: True: Included
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment –
3BK 21253 AAAA TQZZA Ed.07 171 / 492
5 GSM 0&M Parameters
5.2.124 (Booster) - (Booster)
Alcatel BoosterParameter Name
Logical Name Booster
Definition This parameter indicates whether or not a CU is equipped withbooster or not.
Coding rules 0 : CU without booster, 1 : CU with booster
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BTS
Instance CU
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
172 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.125 (BSC IP address) - (Tcsl-IpAddress-BSCside (BSC))
Alcatel BSC IP addressParameter Name
Logical Name Tcsl-IpAddress-BSCside (BSC)
Definition IP address of the TCSL link on BSC side (in BSC sub-system).
Coding rules String of 15 Characters. Coded on 32 bits; eg: 255.255.255.255coded FFFFFFFF
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance TCSL
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / TC Peer Entities
External Comment —
3BK 21253 AAAA TQZZA Ed.07 173 / 492
5 GSM 0&M Parameters
5.2.126 (BSC-HW-Config) - (BSC-HW-Config)
Alcatel BSC-HW-ConfigParameter Name
Logical Name BSC-HW-Config
Definition This parameter indicates the HW configuration of the BSC
Coding rules 0: non-standard configuration; n = 1..6: G2 BSC config n 7..10:unused n= 11..15: BSC Evolution config n-10
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 15 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / BSS HW info
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
174 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.127 (BSS phase version) - (BSS-Phase-Version)
Alcatel BSS phase versionParameter Name
Logical Name BSS-Phase-Version
Definition This parameter identifies the BSS SW phase version, allowing theOMC-R to determine the correct MIB version for interworking withthe BSS
Coding rules This parameter evolves with the BSC MIB version. It is more relevantto refer to the BSC MIB.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 None None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / BSS HW info
External Comment –
3BK 21253 AAAA TQZZA Ed.07 175 / 492
5 GSM 0&M Parameters
5.2.128 (BSS release) - (BSS-Release)
Alcatel BSS releaseParameter Name
Logical Name BSS-Release
Definition This parameter defines the release of the BSS
Coding rules b5 (1), – obsolete b62 (3), – SMG 29.1 b6m (5), – SMG 29.2 b71 (71),– B7.1 b72 (72), – B7.2 spare1 (80) – Postponed features after B7.2
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSS
Unit Minimum Maximum DefaultValue
- none none OMC release
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / Modify BSS
External Comment –
176 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.129 (BTS) - (Inventory-BTS)
Alcatel BTSParameter Name
Logical Name Inventory-BTS
Definition Inventory of the rack shelf and circuitpack of the BTS
Coding rules File Name = rack id
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- - - -
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access BSSUSM / Remote Inventory
External Comment –
3BK 21253 AAAA TQZZA Ed.07 177 / 492
5 GSM 0&M Parameters
5.2.130 (BTS Family) - (BTS-Family)
Alcatel BTS FamilyParameter Name
Logical Name BTS-Family
Definition BTS family
Coding rules see comment
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 102 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment 0 : G1 Mark I ** Not more supported in B8 1 : G1 Mark I / SU HW1** Not more supported in B8 2 : G1 Mark I / SU HW2 ** Not moresupported in B8 16 : G1 Mark II 17 : G1 Mark II / max. 4 TRE /2.20m 18 : G1 Mark II / max. 3+5 TRE / 2.20m 19 : G1 Mark II /max. 3 TRE / 2.00m 20 : G1 Mark II / max. 2+5 TRE / 2.00m 21 :G1 Compact BTS (optionally extended with MkII) 32 : G2 indoor 33 :G2 mini indoor 34 : G2 Standard / 1.25m / Indoor 35 : G2 Standard /2.00m / Indoor 36 : G2 OSSC Indoor ** Not more supported in B8 37: G2 Mini Indoor / max. 1 TRE 48 : G2 Outdoor 49 : G2 Mini Outdoor50 : G2 Standard / 1.20m / Outdoor 51 : G2 OSSC Outdoor ** Notmore supported in B8 80 : G2 Micro BTS !!! Not more supportedin B8 95 : G3, G4, mono standard site, outdoor (Evolium A9100)96 : G3, G4, mono standard site, indoor (Evolium A9100) 97 : G3,G4, multi standard site, outdoor (Evolium A9100) 98 : G3, G4, multistandard site, indoor (Evolium A9100) 99 : G3 BTS M4M / M5M ->Evolium A9110/A9110-E 255 : HW not identified This information isretrieved through the BTS HW audit (HW capability 2 for SBL BTS).
178 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.131 (BTS First NTP Server Ad) - (BTS-First-NTP-Server-Address)
Alcatel BTS First NTP Server AdParameter Name
Logical Name BTS-First-NTP-Server-Address
Definition Address of the first NTP server managing the clock of the IP BTS
Coding rules String of 15 Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management
External Comment —
3BK 21253 AAAA TQZZA Ed.07 179 / 492
5 GSM 0&M Parameters
5.2.132 (BTS Hostname) - (BTS-Hostname)
Alcatel BTS HostnameParameter Name
Logical Name BTS-Hostname
Definition IP BTS Hostname if DNS is used
Coding rules String of 32 Characters max. * Default: empty string
Mandatory rules Meaningless in case DHCP-location = "DHCP located in the OMC"
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
180 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.133 (BTS HW generation) - (BTS-HW-Generation)
Alcatel BTS HW generationParameter Name
Logical Name BTS-HW-Generation
Definition This parameter indicates the BTS HW generation
Coding rules 1 : G1 BTS (not supported by BSC Evolution), 2 : G2 BTS, 3 :Evolium BTS; 20 : G2 micro-BTS !!! Not more supported in B8.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 3 none
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 181 / 492
5 GSM 0&M Parameters
5.2.134 (BTS IP Identifier) - (BTS-IP-Identifier)
Alcatel BTS IP IdentifierParameter Name
Logical Name BTS-IP-Identifier
Definition Unique BTS identifier used by BTS and DHCP server in order todetermine the BTS IP@
Coding rules String of characters, maximum length: 64 characters. Allowedcharacters: 0-9 and A-F *:default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
182 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.135 (BTS name) - (BTS-Name)
Alcatel BTS nameParameter Name
Logical Name BTS-Name
Definition This parameter contains a user-friendly name for the BTS (which islocal to the OMC).
Coding rules String of 32 Characters: Allowed characters: a-z,A-Z,0-9,-,_, andspaces but not in the beginning/ending of the string. *: default:empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 183 / 492
5 GSM 0&M Parameters
5.2.136 (BTS Second NTP Server Ad) -(BTS-Second-NTP-Server-Address)
Alcatel BTS Second NTP Server AdParameter Name
Logical Name BTS-Second-NTP-Server-Address
Definition Address of the second NTP server managing the clock of the IP BTS
Coding rules String of 15 Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSS
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management
External Comment —
184 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.137 (BTS transmission configuration mode) -(BTS-Trans-Config-Mode)
Alcatel BTS transmission configuration modeParameter Name
Logical Name BTS-Trans-Config-Mode
Definition This parameter indicates which mode is used for the configuration ofBTS transmission.
Coding rules 0 : Qmux, 1 : OML, 2 : locally * default: OML for BTS evolium, Qmuxfor BTS G1/G2
Mandatory rules For Evolium BTS BTS-Trans-Config-Mode=1
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 2 *see coding
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 185 / 492
5 GSM 0&M Parameters
5.2.138 (BTS-Id) - (BTS-Id (BSC))
Alcatel BTS-IdParameter Name
Logical Name BTS-Id (BSC)
Definition This parameter gives a unique identification of a BTS within the BSS.
Coding rules —
Mandatory rules Equal to BTS-Id (MFS)
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS Equipment Main view
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
186 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.139 (CBC Router Prim. IP Addr.) -(CBC-ROUTER-PRIMARY-IP-ADDRESS)
Alcatel CBC Router Prim. IP Addr.Parameter Name
Logical Name CBC-ROUTER-PRIMARY-IP-ADDRESS
Definition This parameter gives the primary IP address to be used by the routerin charge of translation of IP into X25 towards/from the CBC. Thisprimary IP address corresponds to the primary X25 address of theCBC.
Coding rules String of 15 Characters. Coded on 32 bits *: default: empty stringcoded as FFFFFFFF
Mandatory rules The OMC shall forbid the value "255.255.255.255"
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 187 / 492
5 GSM 0&M Parameters
5.2.140 (CBC Router Second. IP Addr.) -(CBC-ROUTER-SECONDARY-IP-ADDRESS)
Alcatel CBC Router Second. IP Addr.Parameter Name
Logical Name CBC-ROUTER-SECONDARY-IP-ADDRESS
Definition This parameter gives the secondary IP address to be used by therouter in charge of translation of IP into X25 towards/from the CBC.This secondary IP address corresponds to the secondary X25address of the CBC.
Coding rules String of 15 Characters. Coded on 32 bits. *: default: empty stringcoded as FFFFFFFF
Mandatory rules The OMC shall forbid the value "255.255.255.255"
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is valid only for BSC Evolution
188 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.141 (CCP-DR-TRE) - (CCP-DR-TRE)
Alcatel CCP-DR-TREParameter Name
Logical Name CCP-DR-TRE
Definition This parameter gives the number of DR TRE mapped on a CP-LOG.
Coding rules This parameter is the sum of the DR TRE mapped on TCU of aCP-LOG related to a CCP board.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 200 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access CCP resources usage
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 189 / 492
5 GSM 0&M Parameters
5.2.142 (CCP-FR-TRE) - (CCP-FR-TRE)
Alcatel CCP-FR-TREParameter Name
Logical Name CCP-FR-TRE
Definition This parameter gives the number of FR TRE mapped on a CP-LOG.
Coding rules This parameter is the sum of the FR TRE mapped on TCU of aCP-LOG related to a CCP board.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 200 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access CCP resources usage
External Comment This parameter is valid only for BSC Evolution
190 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.143 (CCP-NB-FREE-TRE) - (CCP-NB-FREE-TRE)
Alcatel CCP-NB-FREE-TREParameter Name
Logical Name CCP-NB-FREE-TRE
Definition This parameter gives the number of free TRE in equivalent FR foreach CP-LOG.
Coding rules This parameter is equal to the number of TCU of a CP-LOG (relatedto a CCP board) multiply by 4 TRE per TCU minus the CCP-NB-USED-TRE
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 200 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access CCP resources usage
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 191 / 492
5 GSM 0&M Parameters
5.2.144 (CCP-NB-USED-TRE) - (CCP-NB-USED-TRE)
Alcatel CCP-NB-USED-TREParameter Name
Logical Name CCP-NB-USED-TRE
Definition This parameter gives the number of used TRE in equivalent FR fora CP-LOG.
Coding rules This parameter is equal to: CCP-FR-TRE + 2 x CCP-DR-TRE. If HRremoval feature is active, this parameter is equal to: CCP-FR-TRE +CCP-DR-TRE.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 200 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access CCP resources usage
External Comment This parameter is valid only for BSC Evolution
192 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.145 (CCP-OCCUPANCY) - (CCP-OCCUPANCY)
Alcatel CCP-OCCUPANCYParameter Name
Logical Name CCP-OCCUPANCY
Definition This parameter gives the percentage of occupancy of each CP-LOGin term of TRE capacity.
Coding rules This parameter is equal to 100 x CCP-NB-USED-TRE /(CCP-NB-USED-TRE+ CCP-NB-FREE-TRE)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 100 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access CCP resources usage
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 193 / 492
5 GSM 0&M Parameters
5.2.146 (Cell hopping type) - (Hopping-Type)
Alcatel Cell hopping typeParameter Name
Logical Name Hopping-Type
Definition This parameter gives the logical hopping configuration of the cell.
Coding rules 0 : non hopping (NH), 1 :Base Band Hopping (BBH), 2 : Radiohopping (RH) This mode is not more supported, 3 : non hopping /Radio hopping (NH/RH). For more details, see ’Comment’ field
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 3 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / Frequencies
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
194 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.147 (Cell-Allocation) - (Cell-Allocation-BCCH-Range)
Alcatel Cell-AllocationParameter Name
Logical Name Cell-Allocation-BCCH-Range
Definition Set of radio frequency channels (in the same frequency range as theBCCH frequency) allocated to a cell.
Coding rules The cell-Allocation is a list of up to 64 ARFCN. *: Default: empty list
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 1023 *
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / Frequencies
External Comment –
3BK 21253 AAAA TQZZA Ed.07 195 / 492
5 GSM 0&M Parameters
5.2.148 (Cell-Allocation) - (Cell-Allocation-NonBCCH-Range)
Alcatel Cell-AllocationParameter Name
Logical Name Cell-Allocation-NonBCCH-Range
Definition Set of radio frequency channels (in the frequency range from the oneof the BCCH frequency) allocated to a cell.
Coding rules The cell-Allocation is a list of up to 64 ARFCN. *: Default: empty list
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 1023 *
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Frequency
External Comment –
196 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.149 (Clock synchronisation) - (OCXO-Synch-Mode)
Alcatel Clock synchronisationParameter Name
Logical Name OCXO-Synch-Mode
Definition This parameter indicates the BTS clock synchronisation mode.
Coding rules 0 :GPS/ PCM synchronised (i.e. BTS is externally synchronised onGPS receiver,if equipped and if signal received, else on Abis PCM);1: free running (i.e. no external synchronisation); 2 : ignore (i.e.setting is left unchanged or setting is unkonwn); 3: NTP
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 3 2
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment –
3BK 21253 AAAA TQZZA Ed.07 197 / 492
5 GSM 0&M Parameters
5.2.150 (Combiner Type) - (Combiner-Type)
Alcatel Combiner TypeParameter Name
Logical Name Combiner-Type
Definition This parameter indicates the type of combiner used in a given BTSsector.
Coding rules 0 : fixed cavities, 1 : Remotely Tuneable Cavities (RTC), 2 : WideBand Combiner (WBC), 3 : duplexer, 4 : duplexer with air combining,255 : unknown
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance Sector
Unit Minimum Maximum DefaultValue
- 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
198 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.151 (Commercial Usage) - (COMMERCIAL_USE)
Alcatel Commercial UsageParameter Name
Logical Name COMMERCIAL_USE
Definition Flag indicating if a BTS is in or out of commercial use
Coding rules 1=in commercial use ; 0=not in commercial use
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem MFS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: PRC & SC RNO Changes: –
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 199 / 492
5 GSM 0&M Parameters
5.2.152 (Connection type) - (Ater-connection-type)
Alcatel Connection typeParameter Name
Logical Name Ater-connection-type
Definition defines the connection type of the Ater: terrestrial or via satellite
Coding rules 0:not used; 1: terrestrial connection type ; 2: connection type viasatellite
Mandatory rules Ater connection type cannot be set to ’via satellite’ if there is at leastone Abis ’via satellite’
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 2 1
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access BSSUSM/Config Ater Param /Display Modif Ater Conection type
External Comment –
200 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.153 (Coupling Type) - (Coupling-Type)
Alcatel Coupling TypeParameter Name
Logical Name Coupling-Type
Definition This parameter gives, in case of BTS G1 or G2, the type of couplingequipment used: RTC (Remotely Tuneable Cavities), WBC (WideBand Combiner) or Duplexer.
Coding rules Possible values are: ’RTC’ (Remotely Tuneable Cavities), ’WBC’(Wide Band Combiner) or ’Duplexer’
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- None None RTC
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment –
3BK 21253 AAAA TQZZA Ed.07 201 / 492
5 GSM 0&M Parameters
5.2.154 (CP-HW-LOG-MAPPING) - (CP-HW-LOG-MAPPING)
Alcatel CP-HW-LOG-MAPPINGParameter Name
Logical Name CP-HW-LOG-MAPPING
Definition This parameter gives the CP-LOG SBL number mapped on eachCP-HW board. For the spare CP-HW board, the value of thisparameter is dummy.
Coding rules 255: There is no CP-LOG mapped on a CP-HW board (spare CCPcase) 1..5: The CP-LOG number mapped on each CP-HW SBL (1..2for OMCP and 3..5 for CCP)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance CP-HW
Unit Minimum Maximum DefaultValue
- 1 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
202 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.155 (Cross-Connect Table) - (TS-Mapping-Table)
Alcatel Cross-Connect TableParameter Name
Logical Name TS-Mapping-Table
Definition This table gives the correspondance between the 32 timeslots of theAbis link before and after the cross connect (i.e. on BSC side andon BTS side).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring / Cross-Connect
External Comment –
3BK 21253 AAAA TQZZA Ed.07 203 / 492
5 GSM 0&M Parameters
5.2.156 (CS3-CS4 Limit) - (NUMBER_OF_ CS3CS4_UNITS)
Alcatel CS3-CS4 LimitParameter Name
Logical Name NUMBER_OF_ CS3CS4_UNITS
Definition Maximum number of objects (cells or TRX) configured for CS3CS4,managed by the OMC
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment The value of this parameter is defined in "oflcf.in" files. At eachPRC activation/modification, the current number of CS3CS4_UNITSis compared with the upper limit. A warning is displayed ifthe current number is above a threshold defined through theWarnThreshold-LimitedFeatures parameter but still below the upperlimit, otherwise the PRC activation is refused. To skip these checks,the upper limit shall be set to 65535.
204 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.157 (Cur. Hopping Law) - (Active-Radio-Conf)
Alcatel Cur. Hopping LawParameter Name
Logical Name Active-Radio-Conf
Definition This parameter indicates if the active radio configuration is thenominal one (use of Frequency hopping) or the alternative one (NoFrequency hopping).
Coding rules 1: nominal (use of Frequency hopping) ; 2: alternative (No Frequencyhopping)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 2 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / Timeslot Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 205 / 492
5 GSM 0&M Parameters
5.2.158 (Current Observation Period) - (Alerter 1 Observation Period)
Alcatel Current Observation PeriodParameter Name
Logical Name Alerter 1 Observation Period
Definition Length of time for which Alerter 1 collects data to compare againstthe threshold values. If the threshold values are breached before theend of the observation period, an alarm is generated (’low-traff-sdcch’alarm). Otherwise, a new observation period is started.
Coding rules 1 = 15 mn, 16 = 240 mn, step size = 15 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 15 240 240
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
206 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.159 (DHCP location) - (DHCP-location)
Alcatel DHCP locationParameter Name
Logical Name DHCP-location
Definition This parameter specifies for an IP BTS if the DHCP server is locatedin the OMC or not.
Coding rules 0: DHCP located in the OMC 1: DHCP not located at the OMCDefault: DHCP located in the OMC
Mandatory rules Always value 0 for an IPoverE1 BTS
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
3BK 21253 AAAA TQZZA Ed.07 207 / 492
5 GSM 0&M Parameters
5.2.160 (DR TRE Limit) - (NUMBER_OF_ DR_TRE)
Alcatel DR TRE LimitParameter Name
Logical Name NUMBER_OF_ DR_TRE
Definition Maximum number of DR TRE, managed by the OMC
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment The value of this parameter is defined in "oflcf.in" files. Ateach PRC activation/modification, the current number of DRTRE is compared with the upper limit. A warning is displayedif the current number is above a threshold defined through theWarnThreshold-LimitedFeatures parameter but still below the upperlimit, otherwise the PRC activation is refused. To skip these checks,the upper limit shall be set to 65535.
208 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.161 (Dyn SDCCH channel) - (Dyn-SDCCH-Channel)
Alcatel Dyn SDCCH channelParameter Name
Logical Name Dyn-SDCCH-Channel
Definition This parameter gives the number of dynamic SDCCH sub-channelsconfigured in the cell at PRC level.
Coding rules Due to the Multiple CCCH feature, the max value of this parameteris: 80 when only one CCCH is present in the cell and 168 when 2CCCH are present in the cell (i.e. one timeslot configured with BCCand one timeslot configured with CCH).
Mandatory rules Dyn-SDCCH-Channel + SDCCH-channel <= 88 when one CCCH ispresent in the cell and Dyn-SDCCH-Channel + SDCCH-channel <=176 when 2 CCCH are present in the cell.
Recommended rules When AbisTransportMode(MFS) is IP, the number of SDCCHsub-channels on a non-BCCH TRX should not exceed 16. The OMCchecks it by raising a non-blocking warning.
Category Site (CAE)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 80 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment —
3BK 21253 AAAA TQZZA Ed.07 209 / 492
5 GSM 0&M Parameters
5.2.162 (Dynamic SDCCH available) - (Nbr-Of-Dyn-SDCCH)
Alcatel Dynamic SDCCH availableParameter Name
Logical Name Nbr-Of-Dyn-SDCCH
Definition This parameter gives the number of available (from an O&M pointof view) dynamic SDCCH subchannel.(allocated or not to SDCCHor TCH)
Coding rules The max value of this parameter is: 80 when only one CCCH ispresent in the cell and 168 when 2 CCCH are present in the cell.MIB Coding: Number of dynamic SDCCH TS: step of one from 1 to21. Number of subchannel = 8* number of TS
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 80 0
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment —
210 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.163 (EDGE Limit) - (NUMBER_OF_EGPRS_UNITS)
Alcatel EDGE LimitParameter Name
Logical Name NUMBER_OF_EGPRS_UNITS
Definition Maximum number of objects (cells or TRX) configured for EGPRS,managed by the OMC
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment The value of this parameter is defined in "oflcf.in" files. At eachPRC activation/modification, the current number of EGPRS_UNITSis compared with the upper limit. A warning is displayed ifthe current number is above a threshold defined through theWarnThreshold-LimitedFeatures parameter but still below the upperlimit, otherwise the PRC activation is refused. To skip these checks,the upper limit shall be set to 65535.
3BK 21253 AAAA TQZZA Ed.07 211 / 492
5 GSM 0&M Parameters
5.2.164 (EME-PWR-MAX-DCS) - (EME-PWR-MAX-DCS)
Alcatel EME-PWR-MAX-DCSParameter Name
Logical Name EME-PWR-MAX-DCS
Definition Maximum emission power for the cell on the frequency band 1800and 1900.
Coding rules step of 0.1
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Threshold
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 9999 9999
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / HO & PC thresholds / EME
External Comment —
212 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.165 (EME-PWR-MAX-GSM) - (EME-PWR-MAX-GSM)
Alcatel EME-PWR-MAX-GSMParameter Name
Logical Name EME-PWR-MAX-GSM
Definition Maximum emission power for the cell on the frequency band 850and 900.
Coding rules step of 0.1
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Threshold
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 9999 9999
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / HO & PC thresholds / EME
External Comment —
3BK 21253 AAAA TQZZA Ed.07 213 / 492
5 GSM 0&M Parameters
5.2.166 (En CRC4) - (En-CRC4)
Alcatel En CRC4Parameter Name
Logical Name En-CRC4
Definition Enables/Disables the CRC4 check on interface A
Coding rules True(1): CRC4 check on: Enable ; False(0): CRC4 check off: Disable
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access BSSUSM / Config Ater Param / Display Modify CRC4
External Comment This parameter is valid only for G2 BSC.
214 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.167 (EXTERNAL ROUTER O&M 1LAN) -(EXTERNAL-ROUTER-O&M-1LAN)
Alcatel EXTERNAL ROUTER O&M 1LANParameter Name
Logical Name EXTERNAL-ROUTER-O&M-1LAN
Definition This parameter gives the address to be used by the BSC for the O&Mflow (when in ’1 LAN’ topology). This parameter is used for threedifferent purposes: routing, reachability test (validation of the switchto be used), supervision (alarm in case of Ethernet path failure).
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 215 / 492
5 GSM 0&M Parameters
5.2.168 (FHS-Id) - (FHS-Id)
Alcatel FHS-IdParameter Name
Logical Name FHS-Id
Definition This parameter gives a unique identification of a Frequency HoppingSequence within a cell. This id is used, together with the MAIO, inthe radio definition of hopping TRX timeslots.
Coding rules An Id is attributed to each defined sequence. Per cell, max 16 FHScan be defined.
Mandatory rules Max 932 FHS can be stored in the BSC.
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance FHS
Unit Minimum Maximum DefaultValue
- 1 16 1
Modifiable OMC Changes: PRC only RNO Changes: HOP
Parameter Access Edit Cell / Radio Channel Config / Frequencies
External Comment Maximum of 16 FHS-Id per cell. Default value depends onconfiguration. The value indicated here is for implementationpurposes.
216 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.169 (First Activation Date) - (auto-inv-next-date)
Alcatel First Activation DateParameter Name
Logical Name auto-inv-next-date
Definition activation time of the automatic inventory performed by the OMC
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- Current - Current + one
Modifiable OMC Changes: ENS RNO Changes: –
Parameter Access ENSUSM / Remote Inventory / Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 217 / 492
5 GSM 0&M Parameters
5.2.170 (First BSC Abis TP) - (First-BIU-Port)
Alcatel First BSC Abis TPParameter Name
Logical Name First-BIU-Port
Definition This parameter gives the port number of the first BIU = primary Abishighway TP.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 84 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment Default value depends on configuration. The value indicated here isfor implementation purposes. This parameter is not used for BSCEvolution
218 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.171 (FIRST-ABIS-HWAY-TP-NUMBER) -(FIRST-ABIS-HWAY-TP-NUMBER)
Alcatel FIRST-ABIS-HWAY-TP-NUMBERParameter Name
Logical Name FIRST-ABIS-HWAY-TP-NUMBER
Definition This parameter gives the first Abis-Hway-TP-Number on which anAbis chain/ring is connected to the BSC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 176 1
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 219 / 492
5 GSM 0&M Parameters
5.2.172 (Frame Timer) - (X25-Frame-Timer)
Alcatel Frame TimerParameter Name
Logical Name X25-Frame-Timer
Definition Timeout before retransmission; at the expiration of this timer,retransmission of a frame may be initiated (Timer T1 inRecommendation ITU-T X.25)
Coding rules 1 = 0.1 s, 255 = 25.5 s, step size = 0.1 s
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
sec 0.1 25.5 1
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. Thisparameter is not used for BSC Evolution.
220 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.173 (Frame Window Size) - (X25-Frame-Window-Size)
Alcatel Frame Window SizeParameter Name
Logical Name X25-Frame-Window-Size
Definition This parameter indicates the value of the Layer 2 window size forX.25 calls. This is the max. number of outstanding I frames at anygiven time (k parameter in Recommendation ITU-T X.25).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 7 7
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. Thisparameter is not used for BSC Evolution.
3BK 21253 AAAA TQZZA Ed.07 221 / 492
5 GSM 0&M Parameters
5.2.174 (Free Abis TS) - (Free-Abis-TS)
Alcatel Free Abis TSParameter Name
Logical Name Free-Abis-TS
Definition This parameter gives the number of free remaining TS on an Abislink.
Coding rules step of one
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 32 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / Display Free TSU Resources
External Comment in BSC Evolution, the OMC HMI view used by OMC-R is "DisplayAbis resources usage"
222 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.175 (Free TCU ressources) - (Free-TCU-Ressource)
Alcatel Free TCU ressourcesParameter Name
Logical Name Free-TCU-Ressource
Definition This parameter is computed and displayed by the OMC. It representsthe number of free ressources in a TCU in term of "Equivalent FullRate" (Eq FR) ressource.
Coding rules Free-TCU-Ressource is computed following the rules: Number ofEq-FR available on a TCU: 4 Number of Eq-FR needed for a TREFR: 1 Number of Eq-FR needed for a TRE DR: 2 Number of Eq-FRneeded for an extra Abis timeslot: 0.5
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance TCU
Unit Minimum Maximum DefaultValue
- 0 4 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / Display Free TSU Resources
External Comment 1 TRX with a Transmission pool type 2 is equivalent to 2 full rateTRX; 1 TRX with a Transmission pool type 3 is equivalent to 3 fullrate TRX; 1 TRX with a Transmission pool type 4 is equivalent to 4full rate TRX; ? 1 TRX with a Transmission pool type 5 is equivalentto 5 full rate TRX. This parameter is not used for BSC Evolution.
3BK 21253 AAAA TQZZA Ed.07 223 / 492
5 GSM 0&M Parameters
5.2.176 (Frequency Band (in Sector information))) -(Frequency-Range-Sector-Capability)
Alcatel Frequency Band (in Sector information))Parameter Name
Logical Name Frequency-Range-Sector-Capability
Definition This parameter indicates the frequency range in which a BTS sectoris able to operate.
Coding rules Bitmap of 8 boolean values. Each bit set to "1" in the bitmapcorresponds to a frequency range: - Bit 0: gsm 900 - Bit 1: egsm -Bit 2: dcs1800 - Bit 3: dcs1900 - Bit 4: not used - Bit 5: gsm850 - Bit6: not used - Bit 7: not used Some bits can be set simultaneouslylike Bit 0 + Bit 1
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem BTS
Instance Sector
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
224 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.177 (Frequency Band (in TRE information))) -(Frequency-Range-CU-Capability)
Alcatel Frequency Band (in TRE information))Parameter Name
Logical Name Frequency-Range-CU-Capability
Definition This parameter indicates the frequency range in which a CU is ableto operate.
Coding rules Bitmap of 8 boolean values. Each bit set to "1" in the bitmapcorresponds to a frequency range: - Bit 0: gsm 900 - Bit 1: egsm -Bit 2: dcs1800 - Bit 3: dcs1900 - Bit 4: not used - Bit 5: gsm850 - Bit6: not used - Bit 7: not used Some bits can be set simultaneouslylike Bit 0 + Bit 1
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem BTS
Instance CU
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 225 / 492
5 GSM 0&M Parameters
5.2.178 (FU Rate) - (Rate-Capability)
Alcatel FU RateParameter Name
Logical Name Rate-Capability
Definition This parameter indicates the Half Rate (HR), Full Rate (FR) andEnhanced Full Rate (EFR) capability of an FU.
Coding rules Bit 0 (LSB) : Half Rate (0 : not supported, 1 : supported); Bit 1 : FullRate (0 : not supported, 1 : supported); Bit 2 : Enhanced Full Rate(0 : not supported, 1 : supported).
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem BTS
Instance FU
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
226 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.179 (FU Type) - (FU-Type)
Alcatel FU TypeParameter Name
Logical Name FU-Type
Definition This parameter gives, in case of BTS G1 or G2, the type of FrameUnit used in the BTS.
Coding rules Possible values are: ’DRFU’ for G1 BTS; ’FUCO’, ’DRFU’ or ’FUMO’for G2 BTS.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- None None DRFU
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment –
3BK 21253 AAAA TQZZA Ed.07 227 / 492
5 GSM 0&M Parameters
5.2.180 (Generation) - (BSC-Generation (BSC))
Alcatel GenerationParameter Name
Logical Name BSC-Generation (BSC)
Definition This parameter indicates the generation of the BSC.
Coding rules 2: G2 BSC 3: BSC Evolution
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 3 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / BSS HW info
External Comment –
228 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.181 (GSL-NB) - (GSL-NB)
Alcatel GSL-NBParameter Name
Logical Name GSL-NB
Definition This parameter gives the number of GSL carried by a CP-LOG.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 24 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access CCP resources usage
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 229 / 492
5 GSM 0&M Parameters
5.2.182 (HO) - (HO-Char)
Alcatel HOParameter Name
Logical Name HO-Char
Definition This parameter allows to characterise an adjacency to Handovertype.
Coding rules 0 = False = No Handover link on the adjacency 1 = True = Handoverlink on the adjacency
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem OMC
Instance adj
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Adjacency / 2G
External Comment Replace with Resel-Char the B8 Adjacency-Type.
230 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.183 (Host name) - (OMC-Host-Name)
Alcatel Host nameParameter Name
Logical Name OMC-Host-Name
Definition This parameter contains the host name of the OMC.
Coding rules String of 32 Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify BSS
External Comment –
3BK 21253 AAAA TQZZA Ed.07 231 / 492
5 GSM 0&M Parameters
5.2.184 (HR presence) - (HR-Presence)
Alcatel HR presenceParameter Name
Logical Name HR-Presence
Definition Despite its name, this flag indicates whether DSP recovery isdisabled or not in the Transcoder. This parameter is used for theconfiguration of the MT120, see comments.
Coding rules 0 : DSP recovery is allowed; 1 : DSP recovery is disabled.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Config Ater Param / Display Modify HR-Preference
External Comment Transcoder MT120 module comprises 12 DSP. A interface channels[to be transcoded] can be distributed on 12 DSP or on 11 DSP. Whendistributed on 11 DSP, the 12th DSP is managed as a spare and isused to recover the failure of another one. The recommended settingis 0, it corresponds to the distribution on 11 DSP, thus allowing faulttolerance in the TC. This advice is valid whatever the presence /ratioof Half Rate calls in the BSC. NB: Name of the parameter comesfrom early deliveries of the MT120, when transcoding HR channelswas expected to require more processing capacity, thus leading todistribute the channels on the 12 DSP.
232 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.185 (HS number) - (HSN)
Alcatel HS numberParameter Name
Logical Name HSN
Definition The HSN (Hopping Sequence Number) describes the hoppingalgorithm to be used on the Air interface. This parameter, togetherwith ARFN-Set, defines a FHS (Frequency Hopping Sequence).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance FHS
Unit Minimum Maximum DefaultValue
- 0 63 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / Frequencies
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 233 / 492
5 GSM 0&M Parameters
5.2.186 (Inner zone Output Power) - (Innerzone-Output-Power)
Alcatel Inner zone Output PowerParameter Name
Logical Name Innerzone-Output-Power
Definition This parameter defines the BTS output power on the inner zone fora concentric cell with the Unbalanced TRX output power featureactivated.
Coding rules This power is computed by the BSC and transmitted to the BTS.
Mandatory rules This parameter is displayed and meaningfull only if theEn-Unbalanced-Output-Power is set to True.
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
dBm 0 255 255
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment —
234 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.187 (IP ADDRESS) - (BSC-IP-ADDRESS)
Alcatel IP ADDRESSParameter Name
Logical Name BSC-IP-ADDRESS
Definition This parameter gives the external O&M IP address of the BSC.
Coding rules String of 15 Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify BSS
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 235 / 492
5 GSM 0&M Parameters
5.2.188 (IP address of the machine) - (OMC-IP-Address)
Alcatel IP address of the machineParameter Name
Logical Name OMC-IP-Address
Definition This parameter gives the IP address of the OMC machine.
Coding rules String of 32 Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment –
236 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.189 (IP-Bandwidth) - (IP-Bandwidth)
Alcatel IP-BandwidthParameter Name
Logical Name IP-Bandwidth
Definition This parameter gives the number of E1 on which one timeslot is usedfor IP if the extraction point is on TC or MSC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 2 16 4
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 237 / 492
5 GSM 0&M Parameters
5.2.190 (IP-EXTRACTION-POINT) - (IP-EXTRACTION-POINT)
Alcatel IP-EXTRACTION-POINTParameter Name
Logical Name IP-EXTRACTION-POINT
Definition This parameter indicates whether the IP link for OMC and CBC isextracted/inserted directly at SSW board (BSC), at the TCADAPT (IPover Ater) or at the MSC (IP over Ater). This information is neededfor programming the TC-ADAPT.
Coding rules 0: the IP links are connected on SSW connectors 1: the IP links areconnected through Atermux to the MSC 2: the IP links are connectedthrough Atermux to the TC-ADAPT
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
238 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.191 (Lapd on Circuit Group) - (Sign-On-Atrk)
Alcatel Lapd on Circuit GroupParameter Name
Logical Name Sign-On-Atrk
Definition This parameter indicates whether or not signalling is configured onthe A-trunk and for signalling, if N7 or GSL is configured
Coding rules 0: No signalling ; 1: n7 signalling ; 2: gsl signalling
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Trunk
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access BSSUSM/A/Ater & Abis Interface / Ater TP level
External Comment –
3BK 21253 AAAA TQZZA Ed.07 239 / 492
5 GSM 0&M Parameters
5.2.192 (lapDlink) - (RSL-Id)
Alcatel lapDlinkParameter Name
Logical Name RSL-Id
Definition This parameter gives the SBL number of the RSL signalling linkwhich is mapped on the TRX. If no TRX is mapped on the TRX, thisparameter is set to FFh.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Cell / TRX Configuration
External Comment –
240 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.193 (List of BCCH frequencies) - (RMS-Ext-Meas-Rep-List)
Alcatel List of BCCH frequenciesParameter Name
Logical Name RMS-Ext-Meas-Rep-List
Definition This parameter defines the list of ARFN values used for extendedmeasurement reporting in Radio Measurements Statistics. This listshall include the BCCH frequency.
Coding rules It is ordered from the lowest to the highest ARFN value, except forthe ARFN value 0 which, if present, is mandatorily at the end of thelist. *: default: empty list
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem BSC
Instance Sector
Unit Minimum Maximum DefaultValue
- -1 1023 *
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / RMS & MAFA
External Comment –
3BK 21253 AAAA TQZZA Ed.07 241 / 492
5 GSM 0&M Parameters
5.2.194 (LIU-Board-Number) - (LIU-Board-Number)
Alcatel LIU-Board-NumberParameter Name
Logical Name LIU-Board-Number
Definition This parameter gives the LIU board number carrying an E1 link.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance E1
Unit Minimum Maximum DefaultValue
- 1 16 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Display Abis resources usage
External Comment This parameter is valid only for BSC Evolution
242 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.195 (LOGICAL TRX LIMIT) - (NUMBER_OF_TRX_PER_OMC)
Alcatel LOGICAL TRX LIMITParameter Name
Logical Name NUMBER_OF_TRX_PER_OMC
Definition Maximum number of TRX managed by the OMC.
Coding rules depends on OMC capacity
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment The value of this parameter is defined in "oflcf.in" files. At each PRCactivation/modification, the current number of TRX is compared withthe upper limit. A warning is displayed if the current number is abovea threshold defined through the WarnThreshold-Limited-Featuresparameter but still below the upper limit, otherwise the PRC activationis refused.
3BK 21253 AAAA TQZZA Ed.07 243 / 492
5 GSM 0&M Parameters
5.2.196 (LSA Name) - (LSA_Name_array (BSC))
Alcatel LSA NameParameter Name
Logical Name LSA_Name_array (BSC)
Definition List of authorised LSAs on a cell (up to 5) defined by its "friendlyname".
Coding rules list of string. *: Default value for each string: "Undefined"
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of references
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / Cell Information / Dedicated Radio Resources 3/3
External Comment –
244 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.197 (MAIO) - (MAIO)
Alcatel MAIOParameter Name
Logical Name MAIO
Definition Mobile Allocation Index Offset, for TRX-TSs which are in a hoppinggroup.
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRX-TS
Unit Minimum Maximum DefaultValue
- 0 63 0
Modifiable OMC Changes: PRC only RNO Changes: HOP
Parameter Access Edit Cell / Radio Channel Config / TRX Configuration
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 245 / 492
5 GSM 0&M Parameters
5.2.198 (MANAGEMENT_DOMAIN) - (MANAGEMENT_DOMAIN)
Alcatel MANAGEMENT_DOMAINParameter Name
Logical Name MANAGEMENT_DOMAIN
Definition This parameter is configured by the TC NEM operator to allow thecorresponding BSC management by the OMC. This parameter shallbe valued to an empty string in the nominal case that every BSC ofthe TC is managed by this same OMC. When a TC is associatedto BSC that are managed by two different OMC, it is possible thattwo different BSC have the same Id on the two OMCs. In this veryspecific case, the MANAGEMENT_DOMAIN parameter is valuedwith the concerned OMC master host id.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access ???
External Comment For each BSC in associatedBscAliasTable there shall be tworows (one with managementDomain = TCNEM and one with(managementDomain = EMPTY_STRING or managementDomain =HOST_ID)). In the very specific case where the BSC of the TC aremanaged by two different OMC (we don’t consider here transitoryoperations), the parameter shall take the OMC master host id value.To value the field, play the ’hostid’ command on the master server ofthe concerned OMC. An hexadecimal value is returned (for instance833836c4) then type the "833836c4" characters on the TC NEM HMIfield. In the nominal case, the string shall just be empty.
246 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.199 (Master BTS) - (MasterBTS-Name)
Alcatel Master BTSParameter Name
Logical Name MasterBTS-Name
Definition This parameter gives for a slave BTS the name (User Label) of thecorresponding master BTS.
Coding rules string of 32 Elements. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment –
3BK 21253 AAAA TQZZA Ed.07 247 / 492
5 GSM 0&M Parameters
5.2.200 (Master/Slave BTS) - (Master-Slave)
Alcatel Master/Slave BTSParameter Name
Logical Name Master-Slave
Definition This flag indicates whether the BTS is a master BTS or a slave BTS(a BTS which is not part of a master-slave association is considered amaster BTS); this information is part of the assumed HW capabilities.
Coding rules 0 : master BTS; 1 : slave BTS *: default: if BTS-Rack-Sharing=1,default 0 if BTS-Rack-Sharing=2, default 1
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment –
248 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.201 (Max DR TRE Primary) - (Max-DR-TRE-Primary)
Alcatel Max DR TRE PrimaryParameter Name
Logical Name Max-DR-TRE-Primary
Definition This parameter gives the maximum of DR TRE to be mapped on firstAbis when a second Abis is attached.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 12 12
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment This parameter is only taken into account when a second Abis isattached
3BK 21253 AAAA TQZZA Ed.07 249 / 492
5 GSM 0&M Parameters
5.2.202 (Max FR TRE Primary) - (Max-FR-TRE-Primary)
Alcatel Max FR TRE PrimaryParameter Name
Logical Name Max-FR-TRE-Primary
Definition This parameter gives the maximum of FR TRE to be mapped on firstAbis when a second Abis is attached.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 15 12
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment This parameter is only taken into account when a second Abis isattached
250 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.203 (Max I Frame Size) - (X25-Max-I-Frame-Size)
Alcatel Max I Frame SizeParameter Name
Logical Name X25-Max-I-Frame-Size
Definition Maximum number of bytes in an L3 frame
Coding rules Possible values: 19, 35, 67, 131, 259, 515, 1027, 2051, 4099, 264Coded: n with n such that frame-size (in bytes)= 2**n+3 except for264 coded 13.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
byte 19 4099 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. Thisparameter is not used for BSC Evolution.
3BK 21253 AAAA TQZZA Ed.07 251 / 492
5 GSM 0&M Parameters
5.2.204 (Max Nb Simult Vcalls) - (X25-Max-Nb-Simult-Vcalls)
Alcatel Max Nb Simult VcallsParameter Name
Logical Name X25-Max-Nb-Simult-Vcalls
Definition Maximum number of simultaneous Virtual Calls
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
252 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.205 (Max Number of Retrans) - (X25-Max-Nb-Retrans)
Alcatel Max Number of RetransParameter Name
Logical Name X25-Max-Nb-Retrans
Definition Maximum number of retransmission (I-frame); this is the maximumnumber of attempts made to complete a successful transmission of alayer 2 frame (N2 parameter in Recommendation ITU-T X.25)
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 20 5
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. Thisparameter is not used for BSC Evolution.
3BK 21253 AAAA TQZZA Ed.07 253 / 492
5 GSM 0&M Parameters
5.2.206 (Max-Number-STM1-Interface) - (Max-Number-STM1-Interface)
Alcatel Max-Number-STM1-InterfaceParameter Name
Logical Name Max-Number-STM1-Interface
Definition This parameter indicates the maximum number of STM1 interfacesallowed to be actived in the considered OMC.
Coding rules Max value depends of OMC capacity
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 none 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment —
254 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.207 (Max-Power-per-Sector-DCS) - (Max-Power-Per-Sector-DCS(BTS))
Alcatel Max-Power-per-Sector-DCSParameter Name
Logical Name Max-Power-Per-Sector-DCS (BTS)
Definition This parameter represents the GMSK output power in DCS band atthe output of the AN (Antenna Network), which the concerned sectorcan provide (after levelling at sector level)
Coding rules Coded in dBm
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance Sector
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment This parameter does not reflect the attenuation specified throughPWR_adjustment
3BK 21253 AAAA TQZZA Ed.07 255 / 492
5 GSM 0&M Parameters
5.2.208 (Max-Power-per-Sector-GSM) - (Max-Power-per-Sector-GSM(BTS))
Alcatel Max-Power-per-Sector-GSMParameter Name
Logical Name Max-Power-per-Sector-GSM (BTS)
Definition This parameter represents the GMSK output power in GSM band atthe output of the AN (Antenna Network), which the concerned sectorcan provide (after levelling at sector level)
Coding rules Coded in dBm
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance Sector
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment This parameter does not reflect the attenuation specified throughPWR_adjustment
256 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.209 (Memo of BTS) - (BTS-Operator-Memo)
Alcatel Memo of BTSParameter Name
Logical Name BTS-Operator-Memo
Definition This parameter allows the OMC operator to enter a free textassociated to the BTS
Coding rules This is a string of up to 2048 characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSS Equipment Main view
External Comment –
3BK 21253 AAAA TQZZA Ed.07 257 / 492
5 GSM 0&M Parameters
5.2.210 (MT120 Capability) - (MT120_Capability)
Alcatel MT120 CapabilityParameter Name
Logical Name MT120_Capability
Definition This parameter gives the Capabilities of the MT120 in term of Codecand mechanism: TFO-AMR-NB: TFO with AMR-NB codecs/ no TFOwith AMR-NB (Yes/No); AMR-WB-TFO: AMR-WB codecs and TFO/no AMR-WB codecs (Yes/No);
Coding rules Bitmap :each bit :’0’ = not capable; ’1’ = capable There is one bitper codec/capability to be supported: bit 1: TFO-AMR-NB; bit 2:AMR-WB-TFO;bit 3: 0;bit 4: 0; bit 5: 0;bit 6: 0 ; bit 7: 0;bit 8: notused for the capability
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Bitmapxd
SubSystem TC
Instance MT120 board
Unit Minimum Maximum DefaultValue
- - - FF
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM/Config Ater Param /Display MT120-Capability
External Comment —
258 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.211 (Multiplexing mode) - (Mux-Mode)
Alcatel Multiplexing modeParameter Name
Logical Name Mux-Mode
Definition This parameter indicates whether multiplexing is sector-balanced orBTS-balanced.
Coding rules 0 : BTS-balanced; 1 : sector-balanced
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 259 / 492
5 GSM 0&M Parameters
5.2.212 (Multiplexing rule) - (Mux-Rule)
Alcatel Multiplexing ruleParameter Name
Logical Name Mux-Rule
Definition This parameter gives the multiplexing rule for OML and RSL.
Coding rules 0 : no multiplexing, 1: static multiplexing, 2 : 64kbit/s statisticmultiplexing, 3 : 16kbit/s statistic multiplexing *: default:Nomultiplexing for BTS G1/G2. 64 Kb/s statistic multiplexing for BTSEvolium.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 3 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment Default value depends on configuration. The value indicated here isfor implementation purposes. G2 BTS support Mux-Rule set to 0 or1. Evolium BTS support all values of Mux-Rule.
260 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.213 (Nb-Free-OML-TCU) - (Nb-Free-OML-TCU)
Alcatel Nb-Free-OML-TCUParameter Name
Logical Name Nb-Free-OML-TCU
Definition This parameter indicates for each TCU what is the number of freeOML.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TCU
Unit Minimum Maximum DefaultValue
- 0 3 3
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 261 / 492
5 GSM 0&M Parameters
5.2.214 (Nb-Free-RSL-TCU) - (Nb-Free-RSL-TCU)
Alcatel Nb-Free-RSL-TCUParameter Name
Logical Name Nb-Free-RSL-TCU
Definition This parameter indicates for each TCU what is the number of freeRSL.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TCU
Unit Minimum Maximum DefaultValue
- 0 4 4
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
262 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.215 (Nbr dyn TS) - (Nbr-Of-dyn-TS)
Alcatel Nbr dyn TSParameter Name
Logical Name Nbr-Of-dyn-TS
Definition This parameter gives the total number of dynamic SDCCH TSconfigured on this TCU .
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance tcu
Unit Minimum Maximum DefaultValue
- 0 4 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / TCU Load Report
External Comment —
3BK 21253 AAAA TQZZA Ed.07 263 / 492
5 GSM 0&M Parameters
5.2.216 (Nbr Of available PDCH) - (Nbr-Of-available-PDCH)
Alcatel Nbr Of available PDCHParameter Name
Logical Name Nbr-Of-available-PDCH
Definition This parameter gives the number of PDCH TS available for PS traffic.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 127 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / USD Cell Overview
External Comment –
264 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.217 (Nbr Of busy PDCH) - (Nbr-Of-busy-PDCH)
Alcatel Nbr Of busy PDCHParameter Name
Logical Name Nbr-Of-busy-PDCH
Definition This parameter gives the number of PDCH TS allocated for PS trafficto the MFS.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 127 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / USD Cell Overview
External Comment –
3BK 21253 AAAA TQZZA Ed.07 265 / 492
5 GSM 0&M Parameters
5.2.218 (Nbr static Sig TS) - (Nbr-of-static-Sig-TS)
Alcatel Nbr static Sig TSParameter Name
Logical Name Nbr-of-static-Sig-TS
Definition This parameter gives the total number of BCCHs TS plus staticSDCCHs TS configured on a TCU
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance tcu
Unit Minimum Maximum DefaultValue
- 0 ? ?
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / TCU Load Report
External Comment —
266 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.219 (Nbr-Of-Atrk-Sign) - (Nbr-Of-Atrk-Sign)
Alcatel Nbr-Of-Atrk-SignParameter Name
Logical Name Nbr-Of-Atrk-Sign
Definition Number of equipped A-trunks signalling connecting BSC and NSS
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 16 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / A interface info
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 267 / 492
5 GSM 0&M Parameters
5.2.220 (Nbr-Of-Atrk-Traf) - (Nbr-Of-Atrk-Traf)
Alcatel Nbr-Of-Atrk-TrafParameter Name
Logical Name Nbr-Of-Atrk-Traf
Definition Number of equipped A-trunks traffic connecting BSC and NSS, andconnecting BSC and MFS".
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 304 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / A interface info
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
268 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.221 (Nb-RSL-CCP) - (Nb-RSL-CCP)
Alcatel Nb-RSL-CCPParameter Name
Logical Name Nb-RSL-CCP
Definition This parameter indicates for each CP-LOG the number of RSLcontrolled by a CCP board and mapped on all the TCU of a CP-LOG.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance CP-LOG
Unit Minimum Maximum DefaultValue
- 0 200 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 269 / 492
5 GSM 0&M Parameters
5.2.222 (Netmask) - (Netmask)
Alcatel NetmaskParameter Name
Logical Name Netmask
Definition Platform parameter of the OMC giving the Netmask.
Coding rules String of 32 Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment –
270 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.223 (Node Identifier) - (Node-Id-BSC)
Alcatel Node IdentifierParameter Name
Logical Name Node-Id-BSC
Definition This parameter gives an identification of the BSC which is uniquewithin the whole network (defined by the customer’s network planningtool).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 FFFFFFFFh 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit BSC / Internetworking / MSC interworking
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 271 / 492
5 GSM 0&M Parameters
5.2.224 (Node Identifier) - (Node-Id-BTS (OMC))
Alcatel Node IdentifierParameter Name
Logical Name Node-Id-BTS (OMC)
Definition This parameter gives an identification of the cell which is supposedto be unique within the whole network (defined by the customer’snetwork planning tool).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 FFFFFFFFh 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment –
272 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.225 (Node identifier) - (Node-Id-BtsSiteManager (OMC))
Alcatel Node identifierParameter Name
Logical Name Node-Id-BtsSiteManager (OMC)
Definition This parameter gives an identification of the BTS which is supposedto be unique within the whole network (defined by the customer’snetwork planning tool).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 FFFFFFFFh 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit BTS (RNL) / Show BTS view
External Comment –
3BK 21253 AAAA TQZZA Ed.07 273 / 492
5 GSM 0&M Parameters
5.2.226 (Node Identifier) - (Node-Id-MFS (OMC))
Alcatel Node IdentifierParameter Name
Logical Name Node-Id-MFS (OMC)
Definition This parameter gives an identification of the MFS which is supposedto be unique within the whole network (defined by the customer’snetwork planning tool).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 FFFFFFFFh 0
Modifiable OMC Changes: – RNO Changes: No
Parameter Access MFSUSM / Links configuration
External Comment –
274 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.227 (NTP-IP-ADDR) - (NTP-IP-ADDR)
Alcatel NTP-IP-ADDRParameter Name
Logical Name NTP-IP-ADDR
Definition This parameter indicates the IP address of the NTP server used forthe date and time synchronisation.
Coding rules String of 15 Characters. Coded on 32 bits. *: default: empty stringcoded as FFFFFFFF
Mandatory rules OMC shall forbid the value "255.255.255.255"
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 275 / 492
5 GSM 0&M Parameters
5.2.228 (Number-Of-Busy-HDLC) - (Number-Of-Busy-HDLC)
Alcatel Number-Of-Busy-HDLCParameter Name
Logical Name Number-Of-Busy-HDLC
Definition Number of busy HDLC channels for OML and RSL
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 512 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Display Abis resources usage
External Comment This parameter is valid only for BSC Evolution
276 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.229 (Number-Of-Free-HDLC) - (Number-Of-Free-HDLC)
Alcatel Number-Of-Free-HDLCParameter Name
Logical Name Number-Of-Free-HDLC
Definition Number of free HDLC channels for OML and RSL
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 512 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Display Abis resources usage
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 277 / 492
5 GSM 0&M Parameters
5.2.230 (OAM SUBNET MASK) - (BSC-IP-O&M-SUBNET-MASK)
Alcatel OAM SUBNET MASKParameter Name
Logical Name BSC-IP-O&M-SUBNET-MASK
Definition This parameter gives the external IP O&M subnet mask of the BSC.
Coding rules String of 15 Characters. *: default: 255.255.255.248
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is valid only for BSC Evolution
278 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.231 (Observation Period) - (Alerter 2 Observation Period)
Alcatel Observation PeriodParameter Name
Logical Name Alerter 2 Observation Period
Definition Length of time for which Alerter 2 collects data to compare againstthe threshold value. If the threshold value is breached before the endof the observation period, an alarm is generated (’ch-inconsist-susp’alarm). Otherwise, a new observation period is started.
Coding rules 1 = 15 mn, 16 = 240 mn, step size = 15 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
mn 15 240 240
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 279 / 492
5 GSM 0&M Parameters
5.2.232 (Observation Period) - (Alerter 3 Observation Period)
Alcatel Observation PeriodParameter Name
Logical Name Alerter 3 Observation Period
Definition Length of time for which Alerter 3 collects data to compare againstthe threshold value. If the threshold value is breached before the endof the observation period, an alarm is generated (tch-block-suspect’alarm). Otherwise, a new observation period is started.
Coding rules 1 = 15 mn, 16 = 240 mn, step size = 15 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 15 240 240
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
280 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.233 (Observation Period) - (Alerter 4 Observation Period)
Alcatel Observation PeriodParameter Name
Logical Name Alerter 4 Observation Period
Definition Length of time for which Alerter 4 collects data to compare against thethreshold values. If the threshold values are breached before the endof the observation period, an alarm is generated (’tch-occup-short’alarm). Otherwise, a new observation period is started.
Coding rules 1 = 15 mn, 16 = 240 mn, step size = 15 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 15 240 240
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 281 / 492
5 GSM 0&M Parameters
5.2.234 (OMC Node Identifier) - (Node-Id-OMC)
Alcatel OMC Node IdentifierParameter Name
Logical Name Node-Id-OMC
Definition This parameter gives an identification of the OMC which is supposedto be unique within the whole network (defined by the customer’snetwork planning tool).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 FFFFFFFFh 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Network (RNL)
External Comment –
282 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.235 (OMC station) - (Pref. OMC-X25-primary-addr)
Alcatel OMC stationParameter Name
Logical Name Pref. OMC-X25-primary-addr
Definition Primary X.25 address of the preferred OMC
Coding rules 0 to 15 characters string *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 283 / 492
5 GSM 0&M Parameters
5.2.236 (OML Timeslot) - (OML-TS-Number)
Alcatel OML TimeslotParameter Name
Logical Name OML-TS-Number
Definition This parameter specifies which TS on Abis interface is assignedto the OML
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 31 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Abis TS Allocation Panel
External Comment –
284 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.237 (OMU Firmware) - (OMU-FW-Release)
Alcatel OMU FirmwareParameter Name
Logical Name OMU-FW-Release
Definition This parameter indicates the FW release of the OMU.
Coding rules 1 : Release 1 (C), 2 : Release 2 (K), 3 : Release 3 (S), 4 : Release 4(D), 255 : unknown
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 255 255
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 285 / 492
5 GSM 0&M Parameters
5.2.238 (OMU HW) - (OMU-HW-Revision)
Alcatel OMU HWParameter Name
Logical Name OMU-HW-Revision
Definition This parameter indicates the HW revision of the OMU.
Coding rules 0 : HW1 (serial test interface, without non-volatile memory), 1 : HW2(parallel test interface, with non-volatile memory), 2 : G3 SUM Board(Evolium A9100), 255 : unknown
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 255
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
286 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.239 (OMU RAM size) - (OMU-RAM-Size)
Alcatel OMU RAM sizeParameter Name
Logical Name OMU-RAM-Size
Definition This parameter indicates the RAM size of the OMU.
Coding rules 1 : 4 Mo, 2 : 8 Mo, stepsize = 4 Mo
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
Mo 4 ? None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 287 / 492
5 GSM 0&M Parameters
5.2.240 (OSI license key) - (OMC-OSI-License-Key)
Alcatel OSI license keyParameter Name
Logical Name OMC-OSI-License-Key
Definition This parameter gives the license key of the OMC OSI stack.
Coding rules String of ?? Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment –
288 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.241 (Outer zone Output Power) - (Outerzone-Output-Power)
Alcatel Outer zone Output PowerParameter Name
Logical Name Outerzone-Output-Power
Definition This parameter defines the BTS output power on the outer zonefor a concentric cell with the Unbalanced TRX output power featureactivated.
Coding rules This power is computed by the BSC and transmitted to the BTS.
Mandatory rules This parameter is displayed and meaningfull only if theEn-Unbalanced-Output-Power is set to True.
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
dBm 0 255 255
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment —
3BK 21253 AAAA TQZZA Ed.07 289 / 492
5 GSM 0&M Parameters
5.2.242 (Packet Size Recept) - (Recept-Packet-Size)
Alcatel Packet Size ReceptParameter Name
Logical Name Recept-Packet-Size
Definition Value of the L3 packet size for receiving data packets in X.25 calls
Coding rules Possible values: 16, 32, 64, 128, 512, 1024, 2048, 4096 Coded: nwith n such that packet-size (in bytes)= 2**n
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
byte 16 4096 16
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
290 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.243 (Packet Size Trans) - (Trans-Packet-Size)
Alcatel Packet Size TransParameter Name
Logical Name Trans-Packet-Size
Definition Value of the L3 packet size for transmission of data packets in X.25calls
Coding rules Possible values: 16, 32, 64, 128, 512, 1024, 2048, 4096 Coded: nwith n such that packet-size (in bytes)= 2**n
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
byte 16 4096 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
3BK 21253 AAAA TQZZA Ed.07 291 / 492
5 GSM 0&M Parameters
5.2.244 (PC ACO IP address) - (PC ACO IP Address)
Alcatel PC ACO IP addressParameter Name
Logical Name PC ACO IP Address
Definition This parameter gives the IP address of the PC used as Alarm CallOut device (PC ACO).
Coding rules String of 32 Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment –
292 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.245 (PC RAP IP address) - (PC RAP IP Address)
Alcatel PC RAP IP addressParameter Name
Logical Name PC RAP IP Address
Definition This parameter gives the IP address of the PC used as RemoteAlarm Printer device (PC RAP).
Coding rules String of ?? Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment –
3BK 21253 AAAA TQZZA Ed.07 293 / 492
5 GSM 0&M Parameters
5.2.246 (PCM number) - (CIC-Code-Atrk)
Alcatel PCM numberParameter Name
Logical Name CIC-Code-Atrk
Definition Circuit Identity Code of channel 0 for an A-trunk carrying CS traffic;the CIC of any channel of an A-trunk is deduced by adding theA-channel number to the CIC of channel 0. Used for communicationbetween NSS & BSC; should be equal in both elements for the sametrunk connection
Coding rules Top 11 bits contain the trunk identity, other 5 bits (least significantbits) set to 0; thus numbered 0020h, 0040h, etc
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance Trunk
Unit Minimum Maximum DefaultValue
- 0 FFFFh 0020h
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSS parameters / A interface info
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
294 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.247 (Period) - (auto-inv-period)
Alcatel PeriodParameter Name
Logical Name auto-inv-period
Definition period of the automatic inventory performed by the OMC
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 30 7
Modifiable OMC Changes: ENS RNO Changes: –
Parameter Access ENSUSM / Remote Inventory / Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 295 / 492
5 GSM 0&M Parameters
5.2.248 (PLMN FREQUENCY BANDS) - (PLMN-FREQUENCY-BANDS)
Alcatel PLMN FREQUENCY BANDSParameter Name
Logical Name PLMN-FREQUENCY-BANDS
Definition Frequency bands used in the whole PLMN.
Coding rules GSM900 and DCS1800 bands: 0 GSM850 and DCS1800 bands: 1GSM850 and DCS1900 bands: 2 GSM900 and DCS1900 bands: 3
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
296 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.249 (PLMN identification) - (Cell-PLMNName)
Alcatel PLMN identificationParameter Name
Logical Name Cell-PLMNName
Definition Friendly name of the PLMN to which the related cell belongs.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Cell footer
External Comment The PLMN name is one of the own or foreign PLMN names shownin the network parameter view of the OMC corresponding to the(MCC,MNC) of the cell.
3BK 21253 AAAA TQZZA Ed.07 297 / 492
5 GSM 0&M Parameters
5.2.250 (PLMN name) - (BSC-OwnPLMN)
Alcatel PLMN nameParameter Name
Logical Name BSC-OwnPLMN
Definition Friendly name of the BSC own PLMN, i.e. the PLMN of all BSCown cells.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / BSC footer
External Comment The PLMN name is one of the own PLMN names shown inthe network parameter view of the OMC corresponding to the(MCC,MNC) associated to the BSC.
298 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.251 (Position Number) - (BTS-Position-Number)
Alcatel Position NumberParameter Name
Logical Name BTS-Position-Number
Definition Position of the BTS on first A-bis
Coding rules Step of 1 *default: the last position in the chain.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 15 *see coding
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 299 / 492
5 GSM 0&M Parameters
5.2.252 (Power Supply) - (Power-Supply)
Alcatel Power SupplyParameter Name
Logical Name Power-Supply
Definition This parameter gives,for BTS G2, the type of power supply usedin the BTS.
Coding rules Possible values are: ’AC’, ’DC’, ’PM06’ or ’PM08’
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- None None AC
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment –
300 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.253 (Pref. OMC-X25-secondary-addr) - (Pref.OMC-X25-secondary-addr)
Alcatel Pref. OMC-X25-secondary-addrParameter Name
Logical Name Pref. OMC-X25-secondary-addr
Definition Secondary X.25 address of the preferred OMC
Coding rules 0 to 15 characters string *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 301 / 492
5 GSM 0&M Parameters
5.2.254 (PREF-OMC-IP-ADDRESS) - (PREF-OMC-IP-ADDRESS)
Alcatel PREF-OMC-IP-ADDRESSParameter Name
Logical Name PREF-OMC-IP-ADDRESS
Definition This parameter gives the IP address of the preferred OMC-R.
Coding rules String of 15 Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management
External Comment This parameter is valid only for BSC Evolution
302 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.255 (Primary Abis number) - (Primary-Abis-Link-Number)
Alcatel Primary Abis numberParameter Name
Logical Name Primary-Abis-Link-Number
Definition This parameter gives, for a given BTS, the Abis link number of theprimary Abis link.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 431 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
3BK 21253 AAAA TQZZA Ed.07 303 / 492
5 GSM 0&M Parameters
5.2.256 (Primary Access Point / NSAP address) - (BSC-Primary-NSAP)
Alcatel Primary Access Point / NSAP addressParameter Name
Logical Name BSC-Primary-NSAP
Definition This parameter indicates the primary NSAP to address the OSI stackused in the context of X.25 data communications
Coding rules –
Mandatory rules –
Recommended rules BSC-Primary-NSAP = BSC_X25_primary_address (in BTP)
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 none
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify BSS
External Comment –
304 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.257 (PWR-Adjustment) - (PWR_ADJUSTMENT)
Alcatel PWR-AdjustmentParameter Name
Logical Name PWR_ADJUSTMENT
Definition This parameter gives the attenuation to be applied on the sectorpower. It allows tuning the cell output power in1/10dbm. Thisattenuation applies only on the GMSK signal, thus reducing themodulation delta power.
Coding rules coded in tenth of dB. Example: 1.6 dB coded 16.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance cell
Unit Minimum Maximum DefaultValue
dB 0 19 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment This parameter is only available when the feature Adjust BTS powerlevel from OMC is implemented in OMC. It offers a friendly wayto modify parameters T3106-D and T3106-F, which will convey tillthe BTS, the desired attenuation. Although the attenuation is givenin 0,1db, the actual setting of the power is done with a possiblevariation of 0,15db.
3BK 21253 AAAA TQZZA Ed.07 305 / 492
5 GSM 0&M Parameters
5.2.258 (Qmux address) - (Qmux-Address (BTS))
Alcatel Qmux addressParameter Name
Logical Name Qmux-Address (BTS)
Definition Qmux address of the BTS
Coding rules Qmux-Address is coded on 30 bits in both intervals 0-4094,4096-1073741823 The value 4095 is forbidden.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1073741823 none
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment –
306 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.259 (Qmux bus) - (Qmux-Bus (BTS))
Alcatel Qmux busParameter Name
Logical Name Qmux-Bus (BTS)
Definition Qmux bus of the BTS
Coding rules Allowed values: 2, 3, 6, 7, 10 & 11 for G2 BSC (A9120 BSC).
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 12 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Network modification / BIE Options
External Comment –
3BK 21253 AAAA TQZZA Ed.07 307 / 492
5 GSM 0&M Parameters
5.2.260 (Qmux TS) - (Qmux-TS-Number)
Alcatel Qmux TSParameter Name
Logical Name Qmux-TS-Number
Definition This parameter identifies the timeslot on Abis used for Qmux channel.
Coding rules *:default: customer dependant
Mandatory rules For BSC Evolution this parameter must not be equal to 0
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 31 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Abis TS Allocation Panel
External Comment –
308 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.261 (Rack Sharing) - (BTS-Rack-Sharing)
Alcatel Rack SharingParameter Name
Logical Name BTS-Rack-Sharing
Definition This parameter indicates, for a G2 BTS, if BTS rack sharing is used. Ifso, it gives the Sector Number which is served by the BTS (1, 2 or 3).
Coding rules 0 : no rack sharing; 1 : rack sharing & BTS on Sector #1; 2 : racksharing & BTS on Sector #2; 3 : rack sharing & BTS on Sector #3
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 3 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 309 / 492
5 GSM 0&M Parameters
5.2.262 (Radio Carrier Type) - (Radio-Carrier-Type)
Alcatel Radio Carrier TypeParameter Name
Logical Name Radio-Carrier-Type
Definition This parameter describes the Hardware Capability of the radiocarriers to perform radio hopping or only baseband hopping. Forradio hopping, the parameter also further discriminates if a secondTX is being used for BCCH filling.
Coding rules 1 : mono-frequency; 2 : radio hopping with on-board BCCH filler; 4 :radio hopping without on-board BCCH filler
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance CU
Unit Minimum Maximum DefaultValue
- 1 4 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
310 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.263 (Radio Front End) - (Radio-Front-End)
Alcatel Radio Front EndParameter Name
Logical Name Radio-Front-End
Definition This parameter gives, for BTS G1 or G2, the type of Radio Front End(RFE) used: LNA (Low Noise Amplifier) or TMA (Tower MountedAmplifier).
Coding rules Possible values are: ’LNA’ (Low Noise Amplifier) or ’TMA’ (TowerMounted Amplifier)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- None None LNA
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment –
3BK 21253 AAAA TQZZA Ed.07 311 / 492
5 GSM 0&M Parameters
5.2.264 (R-bit TS) - (R-bit-TS-Number)
Alcatel R-bit TSParameter Name
Logical Name R-bit-TS-Number
Definition This parameter identifies the timeslot on Abis which carries the RingControl bits (R-bits).
Coding rules *:default : customer dependant
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 31 *
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
312 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.265 (Rearming Timer) - (Alerter 1 Rearming Period)
Alcatel Rearming TimerParameter Name
Logical Name Alerter 1 Rearming Period
Definition Delay time before the next Alerter 1 Observation Period is startedafter an alarm (’low-traff-sdcch’ alarm) has been generated. Theobjective is to avoid flooding the OMC-R with alerter alarms.
Coding rules 3 = 15 mn, 48 = 240 mn, step size = 5 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 15 240 60
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 313 / 492
5 GSM 0&M Parameters
5.2.266 (Rearming Timer) - (Alerter 2 Rearming Period)
Alcatel Rearming TimerParameter Name
Logical Name Alerter 2 Rearming Period
Definition Delay time before the next Alerter 2 Observation Period is startedafter an alarm (’ch-inconsist-susp’ alarm) has been generated. Theobjective is to avoid flooding the OMC-R with alerter alarms.
Coding rules 3 = 15 mn, 48 = 240 mn, step size = 5 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
mn 15 240 60
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
314 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.267 (Rearming Timer) - (Alerter 3 Rearming Period)
Alcatel Rearming TimerParameter Name
Logical Name Alerter 3 Rearming Period
Definition Delay time before the next Alerter 3 Observation Period is startedafter an alarm (’tch-block-suspect’ alarm) has been generated. Theobjective is to avoid flooding the OMC-R with alerter alarms.
Coding rules 3 = 15 mn, 48 = 240 mn, step size = 5 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 15 240 60
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 315 / 492
5 GSM 0&M Parameters
5.2.268 (Rearming Timer) - (Alerter 4 Rearming Period)
Alcatel Rearming TimerParameter Name
Logical Name Alerter 4 Rearming Period
Definition Delay time before the next Alerter 4 Observation Period is startedafter an alarm (’tch-occup-short’ alarm) has been generated. Theobjective is to avoid flooding the OMC-R with alerter alarms.
Coding rules 3 = 15 mn, 48 = 240 mn, step size = 5 mn
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 15 240 60
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
316 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.269 (Related-E1-Port-Number) - (Related-E1-Port-Number)
Alcatel Related-E1-Port-NumberParameter Name
Logical Name Related-E1-Port-Number
Definition This parameter gives the port number on which the E1 used for Abisor Ater is connected.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance E1 port
Unit Minimum Maximum DefaultValue
- 1 256 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access See External comment
External Comment This parameter is valid only for BSC Evolution. For E1 used forAbis, OMC HMI view is either "Display Abis resources usage" or"BSSUSM/Abis topology view". For E1 used for Ater, OMC HMI viewis either "BSSUSM/Ater topology view" or "MFSUSM/Ater topologyview".
3BK 21253 AAAA TQZZA Ed.07 317 / 492
5 GSM 0&M Parameters
5.2.270 (Reserved TS) - (Usable-TSs)
Alcatel Reserved TSParameter Name
Logical Name Usable-TSs
Definition This parameter indicates the timeslots which may be used on Abischain/ring (including use of Qmux and RC). Used also to define theset of Timeslots in case of an IP framed Abis.
Coding rules This parameter is coded with 2 numbers: TS number of the firstusable TS and TS number of the last TS (the timeslots which maybe used on Abis chain/ring are contiguous); TS number are in therange (0..31).
Mandatory rules In case of IP framed Abis the usable TS must be equal to n to 31
Recommended rules Usual assumption for the minimum (i.e. the value of n) is not below10.
Category Site (CAE)
Type List of numbers
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- None None all
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
318 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.271 (Reshuffling allowed) - (Force-TRE-TCU-Grouping)
Alcatel Reshuffling allowedParameter Name
Logical Name Force-TRE-TCU-Grouping
Definition This parameter indicates whether re-mapping of TRE on TCU isenabled or disabled. The goal of this re-mapping is the groupingtogether of TRE on TCU to save free space on TCU for new BTSfor example.
Coding rules 0: FALSE (disabled) ; 1: TRUE (enabled)
Mandatory rules For BSC Evolution this parameter must be set to disabled (0)
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem BSC
Instance TSU
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment The grouping together can be launched either at TSU level or atBSC level.
3BK 21253 AAAA TQZZA Ed.07 319 / 492
5 GSM 0&M Parameters
5.2.272 (RMS_TEMPLATE) - (RMS-Template-Name)
Alcatel RMS_TEMPLATEParameter Name
Logical Name RMS-Template-Name
Definition This parameter indicates the user friendly name for the RMStemplate number x. (x from 1 to 16)
Coding rules string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / RMS & MAFA
External Comment –
320 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.273 (RSL Rate Cap.) - (RSL-Rate-Capability)
Alcatel RSL Rate Cap.Parameter Name
Logical Name RSL-Rate-Capability
Definition This parameter indicates the FU’s capability for LapD multiplexing.
Coding rules Bit 0 (LSB) : 16 kbit/s (0 : not supported, 1 : supported); Bit 1 : 64kbit/s (0 : not supported, 1 : supported); 255 : RSL Rate Capabilityunknown.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem BTS
Instance FU
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 321 / 492
5 GSM 0&M Parameters
5.2.274 (S-bit TS) - (S-bit-TS-Number)
Alcatel S-bit TSParameter Name
Logical Name S-bit-TS-Number
Definition This parameter identifies the timeslot on Abis which carries the LoopSynchronisation Control bits (S-bits).
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 31 None
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
322 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.275 (SDCCH channel) - (SDCCH-channel)
Alcatel SDCCH channelParameter Name
Logical Name SDCCH-channel
Definition This parameter gives the number of static SDCCH sub-channelsconfigured in the cell at PRC level.
Coding rules Step of one. The max value of this parameter is: 88 when only oneCCCH is present in the cell and 176 when 2 CCCH are present inthe cell.
Mandatory rules Dyn-SDCCH-Channel + SDCCH-channel <= 88 when one CCCH ispresent in the cell and Dyn-SDCCH-Channel + SDCCH-channel <=176 when 2 CCCH are present in the cell.
Recommended rules When AbisTransportMode(MFS) is IP, the number of SDCCHsub-channels on a non-BCCH TRX should not exceed 16. The OMCchecks it by raising a non-blocking warning.
Category Site (CAE)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 88 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment —
3BK 21253 AAAA TQZZA Ed.07 323 / 492
5 GSM 0&M Parameters
5.2.276 (SDCCH Template Index) - (SDCCH-Template-Index)
Alcatel SDCCH Template IndexParameter Name
Logical Name SDCCH-Template-Index
Definition SDCCH template Index
Coding rules step of one
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 10 1
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
324 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.277 (SDCCH Template name) - (SDCCH-Template-I-Name[1])
Alcatel SDCCH Template nameParameter Name
Logical Name SDCCH-Template-I-Name[1]
Definition Friendly name of a SDCCH template of index 1
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHTemplate 1
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 325 / 492
5 GSM 0&M Parameters
5.2.278 (SDCCH template name) - (SDCCH-Template-I-Name[10])
Alcatel SDCCH template nameParameter Name
Logical Name SDCCH-Template-I-Name[10]
Definition Friendly name of a SDCCH template of index 10
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHtemplate 10
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
326 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.279 (SDCCH template name) - (SDCCH-Template-I-Name[2])
Alcatel SDCCH template nameParameter Name
Logical Name SDCCH-Template-I-Name[2]
Definition Friendly name of a SDCCH template of index 2
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHtemplate 2
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 327 / 492
5 GSM 0&M Parameters
5.2.280 (SDCCH Template name) - (SDCCH-Template-I-Name[3])
Alcatel SDCCH Template nameParameter Name
Logical Name SDCCH-Template-I-Name[3]
Definition Friendly name of a SDCCH template of index 3
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHTemplate 3
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
328 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.281 (SDCCH template name) - (SDCCH-Template-I-Name[4])
Alcatel SDCCH template nameParameter Name
Logical Name SDCCH-Template-I-Name[4]
Definition Friendly name of a SDCCH template of index 4
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHtemplate 4
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 329 / 492
5 GSM 0&M Parameters
5.2.282 (SDCCH Template name) - (SDCCH-Template-I-Name[5])
Alcatel SDCCH Template nameParameter Name
Logical Name SDCCH-Template-I-Name[5]
Definition Friendly name of a SDCCH template of index 5
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHTemplate 5
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
330 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.283 (SDCCH template name) - (SDCCH-Template-I-Name[6])
Alcatel SDCCH template nameParameter Name
Logical Name SDCCH-Template-I-Name[6]
Definition Friendly name of a SDCCH template of index 6
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHtemplate 6
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 331 / 492
5 GSM 0&M Parameters
5.2.284 (SDCCH Template name) - (SDCCH-Template-I-Name[7])
Alcatel SDCCH Template nameParameter Name
Logical Name SDCCH-Template-I-Name[7]
Definition Friendly name of a SDCCH template of index 7
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHTemplate 7
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
332 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.285 (SDCCH template name) - (SDCCH-Template-I-Name[8])
Alcatel SDCCH template nameParameter Name
Logical Name SDCCH-Template-I-Name[8]
Definition Friendly name of a SDCCH template of index 8
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHtemplate 8
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
3BK 21253 AAAA TQZZA Ed.07 333 / 492
5 GSM 0&M Parameters
5.2.286 (SDCCH Template name) - (SDCCH-Template-I-Name[9])
Alcatel SDCCH Template nameParameter Name
Logical Name SDCCH-Template-I-Name[9]
Definition Friendly name of a SDCCH template of index 9
Coding rules string of 1 to 32 chars
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SDCCH temp
Unit Minimum Maximum DefaultValue
- 1 32 SDCCHTemplate 9
Modifiable OMC Changes: SC only RNO Changes: No
Parameter Access RNUSM / Edit SDCCH Template
External Comment —
334 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.287 (Second BSC Abis TP) - (Second-BIU-Port)
Alcatel Second BSC Abis TPParameter Name
Logical Name Second-BIU-Port
Definition This parameter gives the port number of the second BIU = secondaryAbis highway TP.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 84 None
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 335 / 492
5 GSM 0&M Parameters
5.2.288 (Second. OMC Prim. Address) - (SecondaryOMC-X25-primary-addr)
Alcatel Second. OMC Prim. AddressParameter Name
Logical Name Secondary OMC-X25-primary-addr
Definition Primary X.25 address of the secondary OMC
Coding rules 0 to 15 characters string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is not used for BSC Evolution
336 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.289 (Second. OMC second. Address) - (SecondaryOMC-X25-secondary-addr)
Alcatel Second. OMC second. AddressParameter Name
Logical Name Secondary OMC-X25-secondary-addr
Definition Secondary X.25 address of the secondary OMC
Coding rules 0 to 15 characters string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 337 / 492
5 GSM 0&M Parameters
5.2.290 (SECOND-ABIS-HWAY-TP-NUMBER) -(SECOND-ABIS-HWAY-TP-NUMBER)
Alcatel SECOND-ABIS-HWAY-TP-NUMBERParameter Name
Logical Name SECOND-ABIS-HWAY-TP-NUMBER
Definition In case of ring, this parameter gives the secondAbis-Hway-TP-Number on which this ring is connected tothe BSC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 1 176 none
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment This parameter is valid only for BSC Evolution
338 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.291 (Secondary Access Point / NSAP address) -(BSC-Secondary-NSAP)
Alcatel Secondary Access Point / NSAP addressParameter Name
Logical Name BSC-Secondary-NSAP
Definition This parameter indicates the secondary NSAP to address the OSIstack used in the context of X.25 data communications
Coding rules –
Mandatory rules –
Recommended rules BSC-Secondary-NSAP = BSC_X25_secondary_address (in BTP)
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 none
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify BSS
External Comment –
3BK 21253 AAAA TQZZA Ed.07 339 / 492
5 GSM 0&M Parameters
5.2.292 (SECONDARY-OMC-IP-ADDRESS) -(SECONDARY-OMC-IP-ADDRESS)
Alcatel SECONDARY-OMC-IP-ADDRESSParameter Name
Logical Name SECONDARY-OMC-IP-ADDRESS
Definition This parameter gives the IP address of the secondary OMC-R.
Coding rules String of 15 Characters. *: default: empty string coded as FFFFFFFF
Mandatory rules The OMC shall forbid the value "255.255.255.255"
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is valid only for BSC Evolution
340 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.293 (Sector) - (Sector-Number (BSC))
Alcatel SectorParameter Name
Logical Name Sector-Number (BSC)
Definition Sector number ( corresponds to the SBL number of the BTS-TELSBL.)
Coding rules —
Mandatory rules Equal to Sector-Number (MFS)
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 6 none
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
3BK 21253 AAAA TQZZA Ed.07 341 / 492
5 GSM 0&M Parameters
5.2.294 (Sector name) - (Sector-Name)
Alcatel Sector nameParameter Name
Logical Name Sector-Name
Definition This parameter gives the friendly name (user label) of the Sector
Coding rules List of 32 characters *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance Sector
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access RNUSM / Show footer
External Comment –
342 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.295 (Sector/TRE) - (TRE-Sector-Mapping)
Alcatel Sector/TREParameter Name
Logical Name TRE-Sector-Mapping
Definition This parameter gives the identification of the sector (Sector-Number)on which the TRE is mapped.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRE
Unit Minimum Maximum DefaultValue
- 1 6 None
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 343 / 492
5 GSM 0&M Parameters
5.2.296 (Shared sector) - (attached-sector)
Alcatel Shared sectorParameter Name
Logical Name attached-sector
Definition for a cell shared by 2 BTS, defines on which sector the concernedTRX should be mapped: main or secondary sector.
Coding rules 0: TRX on main sector ; 1: TRX on secondary sector
Mandatory rules if the cell is not shared, all TRX have the status ’main’
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: PRC only RNO Changes: –
Parameter Access Edit Cell / Radio Channel Config / TRX Configuration
External Comment –
344 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.297 (Signalling load) - (Abis-Signalling-Load (BTS))
Alcatel Signalling loadParameter Name
Logical Name Abis-Signalling-Load (BTS)
Definition This parameter provides the signalling load (normal or high) for aBTS. It allows the multiplexing scheme to be controlled
Coding rules 0 : dummy value ; 1: Normal ; 2: high
Mandatory rules This parameter is only used in the context of statisticalAbis-multiplexing 64 Kbits/s; if no multiplexing or static multiplexing orstatistic mux 16 kbits/s is used, then this parameter is meaningless.
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access Create/Modify/Copy/Move BTS / Advanced
External Comment –
3BK 21253 AAAA TQZZA Ed.07 345 / 492
5 GSM 0&M Parameters
5.2.298 (Signalling Load) - (Abis-Signalling-Load (sector))
Alcatel Signalling LoadParameter Name
Logical Name Abis-Signalling-Load (sector)
Definition This parameter provides the signalling load (normal or high) for asector. It allows the multiplexing scheme to be controlled
Coding rules 0 : dummy value ; 1: Normal ; 2: high
Mandatory rules This parameter is only used in the context of statisticalAbis-multiplexing 64 Kbits/s; if no multiplexing or static multiplexing orstatistic mux 16 kbits/s is used, then this parameter is meaningless.
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Sector
Unit Minimum Maximum DefaultValue
- 0 2 1
Modifiable OMC Changes: EML RNO Changes: –
Parameter Access Modify OML/RSL submultiplexing
External Comment –
346 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.299 (Site name) - (BTS-Site-Name)
Alcatel Site nameParameter Name
Logical Name BTS-Site-Name
Definition This parameter contains the Site name of the BTS.
Coding rules String of 32 characters: Allowed characters: a-z,A-Z,0-9,-,_, andspaces but not in the beginning/ending of the string. * Default: 32blank characters
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 347 / 492
5 GSM 0&M Parameters
5.2.300 (START_OAM_IP_ADDRESS) - (START_O&M_IP_ADDRESS)
Alcatel START_OAM_IP_ADDRESSParameter Name
Logical Name START_O&M_IP_ADDRESS
Definition This parameter gives the O&M IP starting address of the BSC. TheIP addresses of all O&M hosts (OMCP active, OMCP1, OMCP2,External alarm box) of the BSC are deduced from this startingaddress.
Coding rules String of 15 Characters. Coded on 32 bits. *: default:255.255.255.255 coded as FFFFFFFF
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This parameter is valid only for BSC Evolution
348 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.301 (Static SDCCH busy) - (Nbr-Of-busy-static-SDCCH)
Alcatel Static SDCCH busyParameter Name
Logical Name Nbr-Of-busy-static-SDCCH
Definition This parameter gives the number of static SDCCH subchannelsreally allocated to signalling by the BSC.
Coding rules step of one. The max value of this parameter is: 88 when only oneCCCH is present in the cell and 176 when 2 CCCH are present inthe cell.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 88 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / USD Cell Overview
External Comment —
3BK 21253 AAAA TQZZA Ed.07 349 / 492
5 GSM 0&M Parameters
5.2.302 (SU-Associated-NE) - (SU-Associated-NE)
Alcatel SU-Associated-NEParameter Name
Logical Name SU-Associated-NE
Definition This parameter refers to the NE associated to the Supervised Unit.
Coding rules String of Characters, concatenation of NE type (i.e. BSC or MFS)+NE id *: default: empty string.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SU
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Supervised Unit Management
External Comment This parameter is valid only for BSC Evolution
350 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.303 (submultiplexing) - (Mux-Type (BSC))
Alcatel submultiplexingParameter Name
Logical Name Mux-Type (BSC)
Definition Multiplexing scheme used on the ATER-HWAY
Coding rules 2 : multiplexing scheme 4-1 (only possible with G2 TC) ; 255 :unknown
Mandatory rules Mux-Type (BSC) = Mux-Type (MFS) (when MFS is present)
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Ater(Mux)
Unit Minimum Maximum DefaultValue
- 2 255 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Network modification / BSS Information / attributes
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 351 / 492
5 GSM 0&M Parameters
5.2.304 (SU-Device-Type) - (SU-Device-Type)
Alcatel SU-Device-TypeParameter Name
Logical Name SU-Device-Type
Definition This parameter gives the Device Type of the Supervised Unit.
Coding rules 1 : device type 1 2 : device type 2 3 : device type 3 4 : device type4 5 : device type 5
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance SU
Unit Minimum Maximum DefaultValue
- 1 5 1
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Supervised Unit Management
External Comment This parameter is valid only for BSC Evolution
352 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.305 (SU-Friendly-Name) - (SU-Friendly-Name)
Alcatel SU-Friendly-NameParameter Name
Logical Name SU-Friendly-Name
Definition This parameter gives the Friendly name of the Supervised Unit.
Coding rules String of 30 ASCII Characters. *: default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SU
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Supervised Unit Management
External Comment This parameter is valid only for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 353 / 492
5 GSM 0&M Parameters
5.2.306 (SU-IP-ADDRESS) - (SU-IP-ADDRESS)
Alcatel SU-IP-ADDRESSParameter Name
Logical Name SU-IP-ADDRESS
Definition This parameter gives the IP address of the Supervised Unit.
Coding rules String of 15 Characters. If the Supervised Unit is connected on theBSC Evolution, SU-IP-ADDRESS = BSC-IP-SUBNET-ADDRESS +6. *:default: empty string
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance SU
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Supervised Unit Management
External Comment This parameter is valid only for BSC Evolution
354 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.307 (SUM Capability) - (SUM-Capability)
Alcatel SUM CapabilityParameter Name
Logical Name SUM-Capability
Definition This parameter defines the SUM capability of the BTS
Coding rules Each capability is coded on one bit:. Capability corresponding tothe bit 0: IPoverE1 capable (SUMA, SUMP, SUMX); Capabilitycorresponding to the bit 1: IPoverE1 middle of chain (SUMA, SUMX);Capability corresponding to the bit 2: IPoverEthernet (SUMX)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Bitmapxd
SubSystem BTS
Instance BTS
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment Used by the OMC for topology check. SUMA: the BTS supports TDM& IPoverE1 without any condition; SUMP: the BTS supports TDM &IPoverE1 if end of chain; SUMX: the BTS supports everything (TDM,IPoverE1, IP Ethernet)
3BK 21253 AAAA TQZZA Ed.07 355 / 492
5 GSM 0&M Parameters
5.2.308 (SU-Protocol) - (SU-Protocol)
Alcatel SU-ProtocolParameter Name
Logical Name SU-Protocol
Definition This parameter gives the protocol to be used with the device of theSupervised Unit.
Coding rules The parameter SU-protocol has 2 values: WAGO_direct, it reflectsthe fact that alarm ’ON’ corresponds to the electrical status ’closeloop’. WAGO_reverse, it reflects the fact that alarm ’ON’ correspondsto the electrical status ’open loop’. *: Default value: WAGO_direct
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance SU
Unit Minimum Maximum DefaultValue
- none none *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Supervised Unit Management
External Comment This parameter is valid only for BSC Evolution. The external alarmbox can be attached to a BSC evolution or to a MFS (evolution orlegacy).
356 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.309 (TC IP Address) - (Tcsl-IpAddress-TCside (TC))
Alcatel TC IP AddressParameter Name
Logical Name Tcsl-IpAddress-TCside (TC)
Definition IP address of the TCSL link on TC side (in TC subsystem).
Coding rules String of 15 Characters. Coded on 32 bits; eg: 255.255.255.255coded FFFFFFFF
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem TC
Instance TC-rack
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / TC Peer Entities
External Comment —
3BK 21253 AAAA TQZZA Ed.07 357 / 492
5 GSM 0&M Parameters
5.2.310 (TC Rack Name) - (TC-Rack-Name-Local-OMC)
Alcatel TC Rack NameParameter Name
Logical Name TC-Rack-Name-Local-OMC
Definition TC rack friendly name entered locally at the OMC.
Coding rules String of 30 ASCII Characters. Allowed characters: a-z,A-Z,0-9,-,_
Mandatory rules The OMC ensures the unicity of the TC rack name inside the OMCby a dedicated check.
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance TC-rack
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Add a TC rack/ Modify a TC rack
External Comment Each TC-Rack-Name-Local-OMC must be unique in the customernetwork: it is the operator responsibility to insure the unicity atnetwork level. TC rack Name must be unique for all TC racksupervised by a certain NPO. When moving a TC rack from an OMCto another one, the operator shall assign exactly same TC rack Namein the target OMC. Moreover the TC-Rack-Name-Local-OMC mustbe different from the BSS-Name of any BSC linked to this TC rack.
358 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.311 (TC Rack Name) - (TC-Rack-Name-Local-TC)
Alcatel TC Rack NameParameter Name
Logical Name TC-Rack-Name-Local-TC
Definition TC rack friendly name entered locally on the TC terminal.
Coding rules String of 30 ASCII Characters.
Mandatory rules —
Recommended rules It is adviced that the operator uses the same name that on the OMC[cf TC-Rack-Name-Local-OMC parameter]
Category Site (CAE)
Type Reference
SubSystem TC
Instance TC-rack
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 359 / 492
5 GSM 0&M Parameters
5.2.312 (TC STM1 Interface identifier) - (TC-STM1-Interface-identifier)
Alcatel TC STM1 Interface identifierParameter Name
Logical Name TC-STM1-Interface-identifier
Definition This parameter indicates the STM1 interface number.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem TC
Instance STM1-ITF
Unit Minimum Maximum DefaultValue
- 1 4 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access TC Rack View
External Comment —
360 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.313 (TC STM1 VC12 Identifier) - (TC-STM1-VC12-Identifier)
Alcatel TC STM1 VC12 IdentifierParameter Name
Logical Name TC-STM1-VC12-Identifier
Definition This parameter indicates the VC12 ressources by defining its 3values K, L and M.
Coding rules K: [1,3] L: [1,7] M: [1,3]
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type List of numbers
SubSystem TC
Instance STM1-VC12
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access ???
External Comment —
3BK 21253 AAAA TQZZA Ed.07 361 / 492
5 GSM 0&M Parameters
5.2.314 (TC type) - (TC-HW-Generation)
Alcatel TC typeParameter Name
Logical Name TC-HW-Generation
Definition This parameter indicates the transcoder HW generation
Coding rules 2 : G2 TC
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance Transcoder
Unit Minimum Maximum DefaultValue
- 1 2 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Network modification / BSS Information / attributes
External Comment –
362 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.315 (TCH allocated) - (Nbr-Of-TCH-allocated)
Alcatel TCH allocatedParameter Name
Logical Name Nbr-Of-TCH-allocated
Definition This parameter gives the number of TCH timeslots used by at leastone call. From B8 These allocated TCH TS could be configuredas TCH or as SDD.
Coding rules (number of static TCH timeslots used by at least one call) + (numberof dynamic TCH timeslots used by at least one call)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 255 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / USD Cell Overview
External Comment —
3BK 21253 AAAA TQZZA Ed.07 363 / 492
5 GSM 0&M Parameters
5.2.316 (TCU number) - (OML-TCU-Mapping)
Alcatel TCU numberParameter Name
Logical Name OML-TCU-Mapping
Definition This parameter identifies the TCU (by its SBL number) that controlsthe OML signalling link.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 250 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / TCU Load Report
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
364 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.317 (Threshold 1) - (Alerter 1 Threshold Value 1)
Alcatel Threshold 1Parameter Name
Logical Name Alerter 1 Threshold Value 1
Definition Threshold value 1 of Alerter 1 (minimum required number of SDCCHseizures in the observed cell)
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Threshold
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 255 3
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 365 / 492
5 GSM 0&M Parameters
5.2.318 (Threshold 1) - (Alerter 2 Threshold Value 1)
Alcatel Threshold 1Parameter Name
Logical Name Alerter 2 Threshold Value 1
Definition Threshold value 1 of Alerter 2 (maximum number of seizure failuresper circuit (A channel))
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Threshold
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 255 3
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
366 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.319 (Threshold 1) - (Alerter 3 Threshold Value 1)
Alcatel Threshold 1Parameter Name
Logical Name Alerter 3 Threshold Value 1
Definition Threshold value 1 of Alerter 3 (maximum busy time for a TCH)
Coding rules –
Mandatory rules Alerter 3 Threshold Value 1 > 30mn
Recommended rules –
Category Site (CAE)
Type Threshold
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
mn 1 255 60
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 367 / 492
5 GSM 0&M Parameters
5.2.320 (Threshold 1) - (Alerter 4 Threshold Value 1)
Alcatel Threshold 1Parameter Name
Logical Name Alerter 4 Threshold Value 1
Definition Threshold value 1 of Alerter 4 (minimum busy time for a TCH)
Coding rules –
Mandatory rules Alerter 4 Threshold Value 1 < 20 s
Recommended rules –
Category Site (CAE)
Type Threshold
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
sec 1 255 10
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
368 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.321 (Threshold 2) - (Alerter 1 Threshold Value 2)
Alcatel Threshold 2Parameter Name
Logical Name Alerter 1 Threshold Value 2
Definition Threshold value 2 of Alerter 1 (minimum number of SDCCH seizuresper cell in the whole BSS for the alerter evaluation)
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Threshold
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 255 50
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 369 / 492
5 GSM 0&M Parameters
5.2.322 (Threshold 2) - (Alerter 4 Threshold Value 2)
Alcatel Threshold 2Parameter Name
Logical Name Alerter 4 Threshold Value 2
Definition Threshold value 2 of Alerter 4 (minimum number of TCH seizures)
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Threshold
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 1 255 3
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSC Alerter Configuration
External Comment –
370 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.323 (Throughput Class Nego) - (X25-Thrghput-Cl-Nego)
Alcatel Throughput Class NegoParameter Name
Logical Name X25-Thrghput-Cl-Nego
Definition This flag indicates whether the throughput class negotiation facilityhas been subscribed or not.
Coding rules 0: no throughput class negociation, 1: throughput class negociation
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 1 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
3BK 21253 AAAA TQZZA Ed.07 371 / 492
5 GSM 0&M Parameters
5.2.324 (Throughput Class Recept) - (Recept-Throughput-Class)
Alcatel Throughput Class ReceptParameter Name
Logical Name Recept-Throughput-Class
Definition Value of the L3 throughput classes for receiving data packets inX.25 calls
Coding rules See ’Comment’ field
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
bit/s 75 192000 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
372 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.325 (Timezone) - (Timezone)
Alcatel TimezoneParameter Name
Logical Name Timezone
Definition Platform parameter of the OMC giving the Timezone.
Coding rules String of ?? Characters.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment –
3BK 21253 AAAA TQZZA Ed.07 373 / 492
5 GSM 0&M Parameters
5.2.326 (Trans-Throughput-Class) - (Trans-Throughput-Class)
Alcatel Trans-Throughput-ClassParameter Name
Logical Name Trans-Throughput-Class
Definition Value of the L3 throughput classes for receiving data packets inX.25 calls
Coding rules See ’Comment’ field
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
bit/s 75 192000 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
374 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.327 (TRAU Loudness downlink) - (TRAU-Loudness-DL)
Alcatel TRAU Loudness downlinkParameter Name
Logical Name TRAU-Loudness-DL
Definition Speech volume for downlink.
Coding rules 0 = -6 dB, 1 = -5 dB, ,6 = 0dB, , 12 = +6 dB
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
dB -6 6 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Config Ater Param / Display Modify TRAU loudness
External Comment –
3BK 21253 AAAA TQZZA Ed.07 375 / 492
5 GSM 0&M Parameters
5.2.328 (TRAU Loudness uplink) - (TRAU-Loudness-UL)
Alcatel TRAU Loudness uplinkParameter Name
Logical Name TRAU-Loudness-UL
Definition Speech volume for uplink.
Coding rules 0 = -6 dB, 1 = -5 dB, ,6 = 0dB, , 12 = +6 dB
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
dB -6 6 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Config Ater Param / Display Modify TRAU loudness
External Comment –
376 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.329 (TRE 8PSK power capability) - (TRE-8psk-Capability (BTS))
Alcatel TRE 8PSK power capabilityParameter Name
Logical Name TRE-8psk-Capability (BTS)
Definition This parameter gives the 8PSK power level that a TRE is capableto emit. This power is relative to the output of the AN (AntennaNetwork) it does not take into account the leveling.
Coding rules The parameter is set to FF(255) if the TRE is not 8PSK capable.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance TRE
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment —
3BK 21253 AAAA TQZZA Ed.07 377 / 492
5 GSM 0&M Parameters
5.2.330 (TRE allocation mode) - (Auto-Alloc-Allowed (Abis))
Alcatel TRE allocation modeParameter Name
Logical Name Auto-Alloc-Allowed (Abis)
Definition This flag indicates whether the system shall automatically allocateA-bis TS for TREs when discovered by the BSS.
Coding rules 0 : auto-allocation not allowed, 1 : auto-allocation allowed
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: – RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
378 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.331 (TRE GMSK power capability) - (TRE-Gmsk-Capability (BTS))
Alcatel TRE GMSK power capabilityParameter Name
Logical Name TRE-Gmsk-Capability (BTS)
Definition This parameter gives the GMSK power level that a TRE is capableto emit. This power is relative to the output of the AN (AntennaNetwork) it does not take into account the leveling.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance TRE
Unit Minimum Maximum DefaultValue
dBm 0 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment —
3BK 21253 AAAA TQZZA Ed.07 379 / 492
5 GSM 0&M Parameters
5.2.332 (TRE-DR) - (Nb-of-DR-TRE)
Alcatel TRE-DRParameter Name
Logical Name Nb-of-DR-TRE
Definition This parameter gives the number of DR TRE per sector and perfrequency band
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance Sector
Unit Minimum Maximum DefaultValue
- 0 12 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment —
380 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.333 (TRX Reshuffling) - (ForceTRX-RSL-Reshuffling)
Alcatel TRX ReshufflingParameter Name
Logical Name ForceTRX-RSL-Reshuffling
Definition This parameter indicates whether the reshuffling of TRX/RSLmapping is enabled or disabled. The goal of the reshuffling is toavoid signaling overload in the cell.
Coding rules 0: FALSE (disabled) ; 1: TRUE (enabled)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment –
3BK 21253 AAAA TQZZA Ed.07 381 / 492
5 GSM 0&M Parameters
5.2.334 (TRX-Id) - (TRX-Id)
Alcatel TRX-IdParameter Name
Logical Name TRX-Id
Definition This parameter gives a unique identification of a TRX within a cell
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- 1 16 last one +1
Modifiable OMC Changes: PRC only RNO Changes: HOP
Parameter Access Edit Cell / TRX Configuration
External Comment –
382 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.335 (TS 0 Usage) - (TS0-Usage)
Alcatel TS 0 UsageParameter Name
Logical Name TS0-Usage
Definition This parameter indicates whether timeslot 0 (on Abis) may be usedfor Qmux and S bits.
Coding rules 0 : TS 0 not used for Qmux and S bits; 1 : TS 0 used for Qmuxand S bits
Mandatory rules For BSC Evolution this parameter must be set to ’not used’ (0)
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem OMC
Instance Abis
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Edit Abis chain/ring/group Basic
External Comment –
3BK 21253 AAAA TQZZA Ed.07 383 / 492
5 GSM 0&M Parameters
5.2.336 (TSC Type) - (TSC-Type)
Alcatel TSC TypeParameter Name
Logical Name TSC-Type
Definition This parameter indicates the type of TSC in use.
Coding rules 1 : Alcatel TSC
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
384 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.337 (Twin Capabilities Usage) - (Twin-Capabilities-Usage)
Alcatel Twin Capabilities UsageParameter Name
Logical Name Twin-Capabilities-Usage
Definition This parameter gives the specific Capabilities of a Twin module perTRE
Coding rules It is the concatenation of 4 groups of bits: 2 bits for 2TRE support(MSB) 2 bits for Tx Div support 2 bits for 4RxDivSupport 2bits forTx Div usage (LSB) TRE support is coded as: 3: all old TRE 1:half cabled 2: both parts cabled Tx Div support is coded as: 3: nosupport 1: support 4RxDivSupport is coded as: 3: no support 1:support TxDivUsage is coded as: 3: not used 1: used
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance TRE
Unit Minimum Maximum DefaultValue
- 0 255 255
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / BSS HW info
External Comment —
3BK 21253 AAAA TQZZA Ed.07 385 / 492
5 GSM 0&M Parameters
5.2.338 (Twin Configuration Request) - (Twin-Configuration-Request)
Alcatel Twin Configuration RequestParameter Name
Logical Name Twin-Configuration-Request
Definition This parameter allows Twin TRE remote configuration on OMCrequest.
Coding rules 0: two-tre (configured as 2 TRE) 1: one-tre-no-txdiv (configured asone TRE without Tx Diversity) 2: one-tre-tx-div (configured as oneTRE with Tx Diversity)
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance MODULE
Unit Minimum Maximum DefaultValue
- 0 2 none
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment —
386 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.339 (Two Abis Links Capability) - (Two-AbisLinks-Capability(BTS))
Alcatel Two Abis Links CapabilityParameter Name
Logical Name Two-AbisLinks-Capability(BTS)
Definition This parameter gives the capability of the BTS to support two Abislinks
Coding rules 0: the BTS is not capable to support 2 Abis links, 1: the BTS is notcapable to support 2 Abis links
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment —
3BK 21253 AAAA TQZZA Ed.07 387 / 492
5 GSM 0&M Parameters
5.2.340 (Two Abis Links Capability) - (Two-AbisLinks-Capability(TRE))
Alcatel Two Abis Links CapabilityParameter Name
Logical Name Two-AbisLinks-Capability(TRE)
Definition This parameter gives the capability of the TRE to support two Abislinks
Coding rules 0: the TRE is not capable to support 2 Abis links, 1: the TRE is notcapable to support 2 Abis links
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem BSC
Instance TRE
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment —
388 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.341 (Tx Power Level) - (TX-Power-Level (BTS))
Alcatel Tx Power LevelParameter Name
Logical Name TX-Power-Level (BTS)
Definition This parameter gives the maximum output power guaranteed bythe HW at the ouput of the AN (Antenna Network). It does not takeinto account the leveling.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BTS
Instance CU
Unit Minimum Maximum DefaultValue
dBm 0 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment –
3BK 21253 AAAA TQZZA Ed.07 389 / 492
5 GSM 0&M Parameters
5.2.342 (TX Power Level) - (TX-Power-Level (OMC))
Alcatel TX Power LevelParameter Name
Logical Name TX-Power-Level (OMC)
Definition This parameter gives,for BTS G1 or G2, the transmission power levelof the BTS.
Coding rules Possible values are: ’TXAL’, ’TXUA’ or ’TXAH’ for G1 BTS; ’medium’or ’high’ for G2 BTS.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BTS
Unit Minimum Maximum DefaultValue
- None None ’medium’
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / HW Capabilities
External Comment –
390 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.343 (TxDIV TRE Limit) - (NUMBER_OF_TXDIV_TRE)
Alcatel TxDIV TRE LimitParameter Name
Logical Name NUMBER_OF_TXDIV_TRE
Definition Maximum number of TxDiv TRE, managed by the OMC.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 1 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment The value of this parameter is defined in "oflcf.in" files. Ateach PRC activation/modification, the current number of TxDivTRE is compared with the upper limit. A warning is displayedif the current number is above a threshold defined through theWarnThreshold-LimitedFeatures parameter but still below the upperlimit, otherwise the PRC activation is refused. To skip these checks,the upper limit shall be set to 65535.
3BK 21253 AAAA TQZZA Ed.07 391 / 492
5 GSM 0&M Parameters
5.2.344 (Unbalanced Output Power) - (En-Unbalanced-Output-Power)
Alcatel Unbalanced Output PowerParameter Name
Logical Name En-Unbalanced-Output-Power
Definition This parameter activates the feature Unbalanced output power.
Coding rules 1: True : the feature is enabled/activated 0: False : the feature isdisabled
Mandatory rules The cell shall be mapped on an Evolium BTS.En-Unbalanced-Output-Power=1 only if Frequency_range =PGSM (GSM 900), DCS1800, EGSM, DCS 1900, GSM 850En-Unbalanced-Output-Power=1 only if cell_type = Concentric (1),Umbrella Concentric (4) En-Unbalanced-Output-Power=1 only if thecell is not shared.
Recommended rules If En-Unbalanced-Output-Power = 1, TPM=0 for all the TRX of theouter zone.
Category Site (CAE)
Type Flag
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment —
392 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.345 (User label) - (BSS-Name)
Alcatel User labelParameter Name
Logical Name BSS-Name
Definition This parameter contains a user-friendly name for the BSS (which islocal to the OMC); it is also used to identify the BSC.
Coding rules String of 32 Characters: Allowed characters: a-z,A-Z,0-9,-,_ *:default: empty string.
Mandatory rules The OMC ensures the unicity of the BSS name inside the OMC bya dedicated check.
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance BSS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Add a BSS
External Comment BSS Name must be unique for all BSC supervised by a certain NPO.When moving a BSC from an OMC to another one, the operator shallassign exactly same BSS Name in the target OMC. Moreover theBSS-Name must be different from the TC-Rack-Name-Local-OMC ofany TC rack linked to this BSC.
3BK 21253 AAAA TQZZA Ed.07 393 / 492
5 GSM 0&M Parameters
5.2.346 (User label) - (Cell-Name)
Alcatel User labelParameter Name
Logical Name Cell-Name
Definition This parameter contains a user-friendly name for the Cell (which islocal to the OMC).
Coding rules String of 32 Characters: Allowed characters: a-z,A-Z,0-9,-,_, andspaces but not in the beginning/ending of the string. *: default:empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access Edit Cell / Cell Information / Cell Description
External Comment –
394 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.347 (Virtual Circuit Number) - (X25-Virtual-Circ-Nb)
Alcatel Virtual Circuit NumberParameter Name
Logical Name X25-Virtual-Circ-Nb
Definition This parameter indicates the number of X.25 Virtual Circuits.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
3BK 21253 AAAA TQZZA Ed.07 395 / 492
5 GSM 0&M Parameters
5.2.348 (Wait-Traffic-Clear) - (Wait-Traffic-Clear-FM)
Alcatel Wait-Traffic-ClearParameter Name
Logical Name Wait-Traffic-Clear-FM
Definition This parameter gives the time during wich the BSC shall wait fortraffic clear in a Disable /Shutting down action.
Coding rules step of one minute
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Timer
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
mn 0 10 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access RNUSM / Shutdown BSS/ Shutdown Cell
External Comment Operator freely selects the duration of the wait traffic clear periodper isolation command..
396 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.349 (Warning Thres) - (WarnThreshold-Limited-Features)
Alcatel Warning ThresParameter Name
Logical Name WarnThreshold-Limited-Features
Definition This parameter contains the threshold above which a warningmessage shall be displayed to the user. It is expressed as percentageof the upper limits defined for the locked features. When the numberof objects configured with any of the locked features exceeds thisthreshold, but is still below the upper limit, the user receives awarning message.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Threshold
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
% 0 100 95
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access RNUSM / Network Information / Limited features
External Comment —
3BK 21253 AAAA TQZZA Ed.07 397 / 492
5 GSM 0&M Parameters
5.2.350 (Window RFH FTAM) - (Window-RFH-FTAM)
Alcatel Window RFH FTAMParameter Name
Logical Name Window-RFH-FTAM
Definition Window size of the local interface in the BSC for control betweenRFH (Remote File Handler) and FTAM, to avoid message queuing infront of the module
Coding rules Only values 3 and 4 are used
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 255 4
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. Thisparameter is not used for BSC Evolution.
398 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.351 (Window Size Recept) - (Recept-Packet-Window-Size)
Alcatel Window Size ReceptParameter Name
Logical Name Recept-Packet-Window-Size
Definition Value of the L3 window size for receiving data packets in X.25 calls
Coding rules Current BSC SW only supports window sizes in the range 1 to 7
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 127 2
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
3BK 21253 AAAA TQZZA Ed.07 399 / 492
5 GSM 0&M Parameters
5.2.352 (Window Size Trans) - (Trans-Packet-Window-Size)
Alcatel Window Size TransParameter Name
Logical Name Trans-Packet-Window-Size
Definition Value of the L3 window size for transmission of data packets in X.25calls
Coding rules Current BSC SW only supports window sizes in the range 1 to 7
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 127 2
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment This BSC parameter is stored on a per link basis in the DLS. For BSCEvolution this parameter is used only for the CBC connection.
400 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.353 (WTC) - (Wait-Traffic-Clear-LCM)
Alcatel WTCParameter Name
Logical Name Wait-Traffic-Clear-LCM
Definition This parameter gives the time during which the BSC shall wait fortraffic clear due to radio modification impacting the traffic in case ofPRC activation. BSC takes care of the Preserve-Calls flag to forcerelease the traffic
Coding rules step of one minute
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Timer
SubSystem OMC
Instance PRC
Unit Minimum Maximum DefaultValue
mn 0 10 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access RNUSM / PRC Activation Parameters
External Comment This parameter is taken into account by any modification of radiodefinition, whatever the concerned BSC.
3BK 21253 AAAA TQZZA Ed.07 401 / 492
5 GSM 0&M Parameters
5.2.354 (X.25 configuration data) - (OMC-X25-Configuration-Data)
Alcatel X.25 configuration dataParameter Name
Logical Name OMC-X25-Configuration-Data
Definition This parameter gives the X.25 configuration data of the OMC.
Coding rules String of ?? Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access ???
External Comment This parameter is not used for BSC Evolution
402 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.2.355 (X.25 extraction) - (X25-Extraction-Point)
Alcatel X.25 extractionParameter Name
Logical Name X25-Extraction-Point
Definition This parameter indicates whether the X.25 is extracted/inserteddirectly at OCPR (BSC), at the TCADAPT (X.25 in ACH) or at theMSC (X.25 in ACH). This information is needed for programmingthe TC-ADAPT.
Coding rules 0 : BSC ("direct"), 1 : MSC ("MSC routed"), 2 : TC-ADAPT ("TCrouted")
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 2 None
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access Network modification / BSS Information / X25 info
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 403 / 492
5 GSM 0&M Parameters
5.3 System (CST)
5.3.1 (—) - (BTS-SW-Master-file)
Alcatel —Parameter Name
Logical Name BTS-SW-Master-file
Definition Identification of the BTS software
Coding rules A friendly name is proposed at OMC.
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / BSS Operating Software Tree
External Comment –
404 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.2 (—) - (CircuitPack-Id)
Alcatel —Parameter Name
Logical Name CircuitPack-Id
Definition This parameter indicates the alcatelCircuitPack identification
Coding rules step of one
Mandatory rules –
Recommended rules –
Category System (CST)
Type Number
SubSystem BSC
Instance Eqt Holder
Unit Minimum Maximum DefaultValue
- 1 63 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 405 / 492
5 GSM 0&M Parameters
5.3.3 (—) - (Max-TRX-per-Cell)
Alcatel —Parameter Name
Logical Name Max-TRX-per-Cell
Definition it allows to create up to 16 TRX per cell in a cell split
Coding rules 16
Mandatory rules –
Recommended rules –
Category System (CST)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 16 16 16
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / TRX Configuration
External Comment –
406 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.4 (—) - (TCSL ID)
Alcatel —Parameter Name
Logical Name TCSL ID
Definition This parameter indicates the TCSL identifier.
Coding rules —
Mandatory rules —
Recommended rules —
Category System (CST)
Type Number
SubSystem BSC
Instance TCSL
Unit Minimum Maximum DefaultValue
- 1 8 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 407 / 492
5 GSM 0&M Parameters
5.3.5 (BSC Port Number) - (Tcsl-Port-BSCside (BSC))
Alcatel BSC Port NumberParameter Name
Logical Name Tcsl-Port-BSCside (BSC)
Definition Port of TCSL link on BSC side (in BSC subsystem).
Coding rules —
Mandatory rules —
Recommended rules —
Category System (CST)
Type Number
SubSystem BSC
Instance TCSL
Unit Minimum Maximum DefaultValue
- 59000 61999 59000
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / TC Peer Entities
External Comment —
408 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.6 (BSS Release) - (BSC-Release)
Alcatel BSS ReleaseParameter Name
Logical Name BSC-Release
Definition This parameter identifies the BSC SW Release. Note that the sameMIB version may be used for different BSC Releases.
Coding rules 11: Rel. B5.1, 12: Rel. B5.2 ; 16: Rel. B 6.1 ; 17: Rel. B 6.2 / BSCG1 ; 18: Rel. B 6.2 SMG#28 ; 19: Rel. B6.2 Pilot ; 20: Rel. B6.2SMG#29.1 ; 21: Rel. B6.2 SMG#29.2 ; 25: Rel. B 7.1 ; 26: Rel.B7.2; 28:BSC Rel. B8; 29: spare value
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 1 29 28
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / BSS HW info
External Comment –
3BK 21253 AAAA TQZZA Ed.07 409 / 492
5 GSM 0&M Parameters
5.3.7 (DTC) - (DTC-Nbr)
Alcatel DTCParameter Name
Logical Name DTC-Nbr
Definition This parameter gives the number of DTC alcatelCircuitPack.
Coding rules step of one
Mandatory rules –
Recommended rules –
Category System (CST)
Type Number
SubSystem BSC
Instance DTC
Unit Minimum Maximum DefaultValue
- 1 306 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / DTC Report
External Comment –
410 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.8 (Max FHS per sector) - (Max-FHS-per-Sector)
Alcatel Max FHS per sectorParameter Name
Logical Name Max-FHS-per-Sector
Definition This parameter defines the maximum number of FHSs per sector.
Coding rules Value of this dimensionning constant is: 16.
Mandatory rules –
Recommended rules –
Category System (CST)
Type Number
SubSystem BSC
Instance Sector
Unit Minimum Maximum DefaultValue
- 16 16 16
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit BTS (RNL) / Show BTS view
External Comment –
3BK 21253 AAAA TQZZA Ed.07 411 / 492
5 GSM 0&M Parameters
5.3.9 (Max TRX per sector) - (Max-TRX-per-Sector)
Alcatel Max TRX per sectorParameter Name
Logical Name Max-TRX-per-Sector
Definition This parameter defines the maximum number of TRXs per sector.
Coding rules Value of this dimensionning constant is: 16.
Mandatory rules –
Recommended rules –
Category System (CST)
Type Number
SubSystem BSC
Instance Sector
Unit Minimum Maximum DefaultValue
- 12 16 16
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Edit Cell / Radio Channel Config / TRX Configuration
External Comment –
412 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.10 (Pref. OMC TSAP-ID) - (Pref. OMC TSAP-ID)
Alcatel Pref. OMC TSAP-IDParameter Name
Logical Name Pref. OMC TSAP-ID
Definition Transport Service Access Point Identifier for the preferred OMC
Coding rules 21503
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 21503
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 413 / 492
5 GSM 0&M Parameters
5.3.11 (Primary Access Point / SSAP) - (BSC Primary SSAP)
Alcatel Primary Access Point / SSAPParameter Name
Logical Name BSC Primary SSAP
Definition Session Service Access Point Identifier for the BSC (Primary AccessPoint)
Coding rules 4253
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 4253
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / Add a BSS
External Comment –
414 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.12 (Primary Access Point / TSAP) - (BSC Primary TSAP)
Alcatel Primary Access Point / TSAPParameter Name
Logical Name BSC Primary TSAP
Definition Transport Service Access Point Identifier for the BSC (PrimaryAccess Point)
Coding rules 4254
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 4254
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Add a BSS
External Comment –
3BK 21253 AAAA TQZZA Ed.07 415 / 492
5 GSM 0&M Parameters
5.3.13 (Secondary Access Point / SSAP) - (BSC Secondary SSAP)
Alcatel Secondary Access Point / SSAPParameter Name
Logical Name BSC Secondary SSAP
Definition Session Service Access Point Identifier for the BSC (SecondaryAccess Point)
Coding rules 4253 if defined, Empty string otherwise.
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 empty string
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Add a BSS
External Comment –
416 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.14 (Secondary Access Point / TSAP) - (BSC Secondary TSAP)
Alcatel Secondary Access Point / TSAPParameter Name
Logical Name BSC Secondary TSAP
Definition Transport Service Access Point Identifier for the BSC (SecondaryAccess Point)
Coding rules 4254 if defined, empty string otherwise.
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem OMC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 empty string
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Add a BSS
External Comment –
3BK 21253 AAAA TQZZA Ed.07 417 / 492
5 GSM 0&M Parameters
5.3.15 (Secondary OMC SSAP-ID) - (Secondary OMC SSAP-ID)
Alcatel Secondary OMC SSAP-IDParameter Name
Logical Name Secondary OMC SSAP-ID
Definition Session Service Access Point Identifier for the secondary OMC
Coding rules 21327
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 21327
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment –
418 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.16 (Secondary OMC TSAP-ID) - (Secondary OMC TSAP-ID)
Alcatel Secondary OMC TSAP-IDParameter Name
Logical Name Secondary OMC TSAP-ID
Definition Transport Service Access Point Identifier for the secondary OMC
Coding rules 21503
Mandatory rules –
Recommended rules –
Category System (CST)
Type Reference
SubSystem BSC
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 65535 21503
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / Modify Peer Entities
External Comment –
3BK 21253 AAAA TQZZA Ed.07 419 / 492
5 GSM 0&M Parameters
5.3.17 (TC Port Number) - (Tcsl-Port-TCside (TC))
Alcatel TC Port NumberParameter Name
Logical Name Tcsl-Port-TCside (TC)
Definition Port of TCSL link on TC side in TC subsystem
Coding rules —
Mandatory rules —
Recommended rules —
Category System (CST)
Type Number
SubSystem TC
Instance TC-rack
Unit Minimum Maximum DefaultValue
- 59000 61999 59000
Modifiable OMC Changes: No RNO Changes: No
Parameter Access DCN Management / TC Peer Entities
External Comment —
420 / 492 3BK 21253 AAAA TQZZA Ed.07
5 GSM 0&M Parameters
5.3.18 (TCU number) - (TCU-number)
Alcatel TCU numberParameter Name
Logical Name TCU-number
Definition This parameter gives the number of the TCU on wich the TRX ismapped.
Coding rules —
Mandatory rules —
Recommended rules —
Category System (CST)
Type Number
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- 1 ? 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / TCU Load Report
External Comment —
3BK 21253 AAAA TQZZA Ed.07 421 / 492
5 GSM 0&M Parameters
422 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6 GPRS 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 423 / 492
6 GPRS 0&M Parameters
6.1 Network (CDE)
6.1.1 (—) - (EXTERNAL_ROUTER_BSS)
Alcatel —Parameter Name
Logical Name EXTERNAL_ROUTER_BSS
Definition This parameter gives the address to be used by the GPU for its IPBSS output flow.
Coding rules —
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem MFS
Instance GPU
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
424 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.1.2 (—) - (EXTERNAL_ROUTER_GB)
Alcatel —Parameter Name
Logical Name EXTERNAL_ROUTER_GB
Definition This parameter gives the address to be used by the GPU for its IPGb output flow.
Coding rules —
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem MFS
Instance GPU
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 425 / 492
6 GPRS 0&M Parameters
6.1.3 (—) - (MFS_AUTO_RI_PERIOD)
Alcatel —Parameter Name
Logical Name MFS_AUTO_RI_PERIOD
Definition This parameter represents the time for creating a Remote Inventoryfile at MFS. This time must correspond, as possible, to a low chargeon control station.
Coding rules HH:MM:SS with HH are hours [00..23], MM are minutes [00..59],SS are seconds [00..59]
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 00:00:00 23:59:59 03:00:00
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
426 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.1.4 (—) - (UL_ESTAB_FAILURE_CONG_RATIO_THRESHOLD)
Alcatel —Parameter Name
Logical Name UL_ESTAB_FAILURE_CONG_RATIO_THRESHOLD
Definition This parameter is part of the formula used by the MFS in the algorithmsleeping cell detection. It is the percentage of Uplink TBF Establishmentfailures due to radio congestion above which a sleeping cell can be detected.
Coding rules Step of 1
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Threshold
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
% 0 100 90
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 427 / 492
6 GPRS 0&M Parameters
6.1.5 (—) - (UL_ESTAB_REQUEST_THRESHOLD)
Alcatel —Parameter Name
Logical Name UL_ESTAB_REQUEST_THRESHOLD
Definition This parameter is part of the formula used by the MFS in the algorithmsleeping cell or sleeping GPU detection. It is the minimum number ofUplink Establishment requests necessary to validate the evaluationof the sleeping cell (during SLEEPING_CELL_POLLING_PERIOD).
Coding rules Step of 1
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Threshold
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 65535 80
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment For the formula used by the MFS to detect a sleeping cell or asleeping GPU, refer to the MFS alarm dictionary.
428 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.1.6 (—) - (UL_ESTAB_SUCCESS_RATIO_THRESHOLD)
Alcatel —Parameter Name
Logical Name UL_ESTAB_SUCCESS_RATIO_THRESHOLD
Definition This parameter is part of the formula used by the MFS in thealgorithm sleeping cell or sleeping GPU detection. It is thepercentage of successful Uplink TBS Establishments below whicha sleeping cell can be detected.
Coding rules Step of 1
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Threshold
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
% 0 100 30
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment For the formula used by the MFS to detect a sleeping cell or asleeping GPU, refer to the MFS amarm dictionary.
3BK 21253 AAAA TQZZA Ed.07 429 / 492
6 GPRS 0&M Parameters
6.1.7 (EN_Secured_Single_Gb) - (EN_Secured_Single_Gb)
Alcatel EN_Secured_Single_GbParameter Name
Logical Name EN_Secured_Single_Gb
Definition This parameter is a Flag to enable/disable the secured single Gbfeature at MFS.
Coding rules 0 means disable, <>0 means enable
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Flag
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
430 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.1.8 (Foreign / PLMN 4 Mobile Country Code) - (ForeignMCC[4])
Alcatel Foreign / PLMN 4 Mobile Country CodeParameter Name
Logical Name ForeignMCC[4]
Definition Mobile Country Code of the fourth foreign PLMN
Coding rules -1 corresponds to the dummy value
Mandatory rules If ForeignPLMN-name[4] = empty string, then ForeignMCC[4]=-1
Recommended rules —
Category Network (CDE)
Type Reference
SubSystem OMC
Instance OMC
Unit Minimum Maximum DefaultValue
- -1 999 -1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Edit Network
External Comment —
3BK 21253 AAAA TQZZA Ed.07 431 / 492
6 GPRS 0&M Parameters
6.1.9 (IP-ExtLink-Sharing) - (IP_EXTLINK_SHARING)
Alcatel IP-ExtLink-SharingParameter Name
Logical Name IP_EXTLINK_SHARING
Definition This parameter indicates if the IP external links of the MFS Evolutionis shared with a BSC Evolution or not.
Coding rules 0: IP external links are not shared with a BSC Evolution 1: IPexternal links are shared with a BSC Evolution
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter is valid only for MFS Evolution
432 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.1.10 (MFS name) - (MFS_NAME)
Alcatel MFS nameParameter Name
Logical Name MFS_NAME
Definition This parameter contains a user-friendly name for the MFS platform.
Coding rules String of 32 Characters: Allowed characters: a-z,A-Z,0-9,-,_
Mandatory rules –
Recommended rules –
Category Network (CDE)
Type Reference
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 1 32
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access MFSUSM / Main View
External Comment –
3BK 21253 AAAA TQZZA Ed.07 433 / 492
6 GPRS 0&M Parameters
6.1.11 (SECURITY_LEVEL) - (SECURITY_LEVEL)
Alcatel SECURITY_LEVELParameter Name
Logical Name SECURITY_LEVEL
Definition This parameter defines the level of UNIX security of the MFS
Coding rules MFS security is at the level of: "0": B9 release; "1"; B10 release.
Mandatory rules —
Recommended rules —
Category Network (CDE)
Type Number
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access ???
External Comment —
434 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.1.12 (SLEEPING CELL POLLING PERIOD) -(SLEEPING_CELL_POLLING_PERIOD)
Alcatel SLEEPING CELL POLLING PERIODParameter Name
Logical Name SLEEPING_CELL_POLLING_PERIOD
Definition This timer is used in the process of detection of sleeping cell orsleeping GPU. It defines the period between two evaluations.
Coding rules Step size is 10 mn. The max value 3 means the period max betweentwo evaluations is 3x10=30mn. Value 0 means no detection ofsleeping cell. Default value: 20 minutes
Mandatory rules —
Recommended rules The value 1 is not recommended.
Category Network (CDE)
Type Timer
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
mn 0 3 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 435 / 492
6 GPRS 0&M Parameters
6.2 Site (CAE)
6.2.1 (—) - (ABIS_BTS_GROUP_ID)
Alcatel —Parameter Name
Logical Name ABIS_BTS_GROUP_ID
Definition This parameter indicates the identifier of Abis BTS group.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 431 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
436 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.2 (—) - (ABIS_BTS_GROUP_SECONDARY_ID)
Alcatel —Parameter Name
Logical Name ABIS_BTS_GROUP_SECONDARY_ID
Definition This parameter indicates the Abis group Id corresponding to thesecondary BTS in case of shared cells.
Coding rules -1: for non-shared cells
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 431 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 437 / 492
6 GPRS 0&M Parameters
6.2.3 (—) - (ABIS_TRANSPORT_MODE (MFS))
Alcatel —Parameter Name
Logical Name ABIS_TRANSPORT_MODE (MFS)
Definition This parameter indicates the transport mode of the BTS in MFSsubsystem.
Coding rules 0: TDM 1: IP Default: TDM
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem MFS
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
438 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.4 (—) - (Ach-GPRS-CS)
Alcatel —Parameter Name
Logical Name Ach-GPRS-CS
Definition This parameter indicates for each channel of an A-trunk whetherit carries GPRS traffic (i.e. either GIC(GCH) or GSL) or CircuitSwitched traffic (i.e. either CIC, TS0, X.25, Qmux or N7)
Coding rules Bitmap of 32 boolean values: 0 = A-channel carries CS traffic, 1 =A-channel carries GPRS traffic (See also ’Comment’ field)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem BSC
Instance Trunk
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 439 / 492
6 GPRS 0&M Parameters
6.2.5 (—) - (BTS_ID_SECONDARY)
Alcatel —Parameter Name
Logical Name BTS_ID_SECONDARY
Definition This parameter gives to the MFS the Id of the BTS on which thesecondary sector of a cell shared is mapped.
Coding rules In case of cell shared, equal to BTS-Id (MFS) of the BSS to whichthe cell is linked. If not cell shared equal to 0
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 255 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
440 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.6 (—) - (MFS-Version (BSC))
Alcatel —Parameter Name
Logical Name MFS-Version (BSC)
Definition This parameter identifies the version of the MFS.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 65535 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
3BK 21253 AAAA TQZZA Ed.07 441 / 492
6 GPRS 0&M Parameters
6.2.7 (—) - (MUX_TYPE (MFS))
Alcatel —Parameter Name
Logical Name MUX_TYPE (MFS)
Definition Multiplexing scheme used on the ATER-HWAY
Coding rules 2 : multiplexing scheme 4-1 (only possible with G2 TC) ; 255 :unknown
Mandatory rules Mux-Type (BSC) = Mux-Type (MFS)
Recommended rules –
Category Site (CAE)
Type Number
SubSystem MFS
Instance Ater(Mux)
Unit Minimum Maximum DefaultValue
- 2 255 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment –
442 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.8 (—) - (NB_BONUS_AND_PS_CAPABLE_TRX)
Alcatel —Parameter Name
Logical Name NB_BONUS_AND_PS_CAPABLE_TRX
Definition Represents the number of: ’PS-capable TRXs’ and ’TRXs supportingMPDCH(s))’, in a cell.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 16 0
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access —
External Comment This parameter is valid both for MFS Evolution and non-MFSEvolution
3BK 21253 AAAA TQZZA Ed.07 443 / 492
6 GPRS 0&M Parameters
6.2.9 (—) - (REMOTE_EQUIPMENT)
Alcatel —Parameter Name
Logical Name REMOTE_EQUIPMENT
Definition This parameter gives the type of equipment facing the MFS for agiven Termination point
Coding rules 0: BSC ; 1: TC ; 2: SGSN ; 3: unknown; 4: BSC_Evolution
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type List of numbers
SubSystem MFS
Instance Ater(Mux)
Unit Minimum Maximum DefaultValue
- 0 4 None
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / Ater supervision
External Comment –
444 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.10 (—) - (SECTOR_NUMBER (N))
Alcatel —Parameter Name
Logical Name SECTOR_NUMBER (N)
Definition Sector identifier of an adjacent cell.
Coding rules Only values [1..6] are significant. Value 0 means that the adjacentcell is external to the OMC.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance adj
Unit Minimum Maximum DefaultValue
- 0 6 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 445 / 492
6 GPRS 0&M Parameters
6.2.11 (—) - (TS-Usage-State)
Alcatel —Parameter Name
Logical Name TS-Usage-State
Definition This parameter gives the usage state of a TS depending on istelecom usage.
Coding rules 0: idle free for PS/CS or signalling traffic 1: tch-active-mo 2:tch-active-mt 3: tch-active-ho 4: unavailable; locked 5: dummy;VGCH-T busy 6: sig-cs-active; VGCH-L busy 7: sig-cs-busy; VGCH-Tactive 8: Pdch-busy; Pdch-allocated 9: sig-ps; VGCH-L active 10:tch-busy-mo 11: tch-busy-mt 12: tch-busy-ho 13: tch-busy-mt-ho 14:tch-busy-mo-ho 15: tch-busy-mo-mt
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRX-TS
Unit Minimum Maximum DefaultValue
- 0 15 0
Modifiable OMC Changes: EML RNO Changes: No
446 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
Parameter Access BSSUSM : Cell Report
External Comment State signification: idle: This state refers to an Abis Radio resourcedefined to carry CS traffic or signalling or PS traffic but currentlynot used. TCH-ACTIV: This state refers to a Radio resource whichis used as TCH and carries only one HR CS call (i.e the other HRresource is free). TCH-BUSY: This state refers to a Radio resourcewhich is used as TCH and carries, for TCH FR TS, one call isestablisheda FR CS call, and for TCH HR TS, one call is establishedon each HR nibbletwo HR CS calls. Unavailable: This state refersto a Radio resource which is Unavailable Tsdue to (TRE failure,unmapped TRX ..). It is the whole TRX that is unavailable, i.e. all TSof the TRX are marked "X". LOCKED: This state is used whenrefersto an Radio resource which is locked. (BTS-Tel set to OPR ). It isthe whole TRX that is locked, i.e. all TS of the TRX are marked "L".DUMMY: This state refers to a Radio resource which The actualUsage state can not be reported.is unknown. SIG-ACTIV: This staterefers to a radio Resource which is used to carry SDCCH and atleast one SDCCH sub-channel remains free on the timeslot. Thisfollowing timeslots can be reported in this state: - static SDCCH/7 orSDCCH/8 timeslots - dynamic SDCCH/8 timeslots - BCCCH timeslotcombined with SDCCH/3 or SDCCH/4 SIG-CS-BUSY: This staterefers to a radio Resource which is used to carry CS signaling (BCCHand/or SDCCH) and all sub-channels are used. This followingtimeslots can be reported in this state: - static SDCCH/7 or SDCCH/8timeslots - dynamic SDCCH/8 timeslots - BCCCH timeslot combinedwith SDCCH/3 or SDCCH/4 - BCCH timeslot not combined.SPDCH-BUSY: This state refers to a radio Resource currentlyallocated as slave PDCH by the BSC. The timeslot may either carryPS traffic or not. SIG-PS-BUSY: This state refers to a radio Resourcecurrently used as master PDCH to carry PS signaling. the
3BK 21253 AAAA TQZZA Ed.07 447 / 492
6 GPRS 0&M Parameters
6.2.12 (8PSK-HP-Capability) - (8PSK-HP-Capability)
Alcatel 8PSK-HP-CapabilityParameter Name
Logical Name 8PSK-HP-Capability
Definition This parameter, computed by the BTS, informs the BSC on the bestTRE HSDS capable.
Coding rules Not 8Psk capable TRE : FALSE (0) 8Psk capable TRE: ifModulationDeltaPower>3: set to FALSE (0) 8Psk capable TRE : ifModulationDeltaPower<3 or 0 : set to TRUE (1)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BTS
Instance TRE
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment —
448 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.13 (Administrative state for packet) - (BSS_GPRS_ADMIN_STATE)
Alcatel Administrative state for packetParameter Name
Logical Name BSS_GPRS_ADMIN_STATE
Definition This parameter represents the administrative state of the GPRSfunctionality for the BSS (not circuit).
Coding rules 0:GPRS locked, 1: GPRS unlocked. 2: GPRS shutting down
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSC
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access RNUSM / BSC footer
External Comment MAX_PDCH and cell_type are defined in BTP. Shutting down stateis not used.
3BK 21253 AAAA TQZZA Ed.07 449 / 492
6 GPRS 0&M Parameters
6.2.14 (Administrative state for packet) - (CELL_GPRS_ADMIN_STATE)
Alcatel Administrative state for packetParameter Name
Logical Name CELL_GPRS_ADMIN_STATE
Definition This parameter allows to start/stop GPRS on the cell.
Coding rules 0: GPRS locked, 1: GPRS unlocked, 2: GPRS shutting Down
Mandatory rules If (MAX_PDCH>0 AND cell_type=Extended cell) thenCell-GPRS-Admin-State=locked
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 2 0
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access RNUSM / Cell footer
External Comment MAX_PDCH and cell_type are defined in BTP. When the cell is set to"shutting down", it triggers a block on the BVC, advising the SGSNnot to send any data on this cell. If no BVC is allocated to the cell,it has no particular effect and the administrative state becomes"locked". If there is a GSL on the LXPU this cell is mapped onto, andif the containing bss-function is not locked, a STOP_GPRS primitiveis emitted on the GSL to the BSC. When the acknowledgement isreturned, the administrative state becomes "locked".
450 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.15 (BTS-Id) - (BTS_ID (MFS))
Alcatel BTS-IdParameter Name
Logical Name BTS_ID (MFS)
Definition This parameter gives a unique identification of a BTS to which cell isbelonging.
Coding rules —
Mandatory rules Equal to BTS-Id (BSC)
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 1 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS Equipment Main view
External Comment —
3BK 21253 AAAA TQZZA Ed.07 451 / 492
6 GPRS 0&M Parameters
6.2.16 (BTS-Id) - (BTS_ID (N))
Alcatel BTS-IdParameter Name
Logical Name BTS_ID (N)
Definition BTS identifier of an adjacent cell.
Coding rules Only values [1..255] are significant. Value 0 means that the adjacentcell is external to the OMC.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance adj
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
452 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.17 (Capacity) - (BEARER_CHANNEL_CAPACITY)
Alcatel CapacityParameter Name
Logical Name BEARER_CHANNEL_CAPACITY
Definition This parameter identifies the GPRS timeslots of the Bearer Channel.From these timeslots can be deduced the Bearer Channel capacity(see the ’ACCESS_RATE_BC’ BTP parameter).
Coding rules Bitmap of 32 bit. Each bit represents a GPRS TS. They aredistributed on the free TS of the Bearer Channel by putting the bitto one.
Mandatory rules Insertion of Gb flow on an MFS/TC link does not take more Gbbandwidth than allowed by the CS flow (mixed CS/PS case): "If G2BSC and the Bearer Channel is configured on a 2MbTTP facing aTC: SUM OF CS TS configured on the corresponding 2Mb-TTP(facing the BSC) + SUM OF PS TS of the Bearer Channel 2Mb-TTP+ TS0 + TS16 + TS28 <= 32 If Mx BSC and the Bearer Channel isconfigured on a 2MbTTP facing a TC: SUM OF CS TS configured onthe corresponding 2Mb-TTP (facing the BSC) + SUM OF PS TS ofthe Bearer Channel 2Mb-TTP + TS0 + TS28 <= 32"
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem MFS
Instance BC
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / GB Configuration / Bearer Channel
External Comment –
3BK 21253 AAAA TQZZA Ed.07 453 / 492
6 GPRS 0&M Parameters
6.2.18 (Dyn SDCCH busy) - (Nbr-Of-busy-dyn-SDCCH)
Alcatel Dyn SDCCH busyParameter Name
Logical Name Nbr-Of-busy-dyn-SDCCH
Definition This parameter gives the number of dynamic SDCCH subchannelsreally allocated to signalling by the BSC.
Coding rules step of 8. Due to the Multiple CCCH feature, the max value of thisparameter is: 80 when only one CCCH is present in the cell and 168when 2 CCCH are present in the cell (i.e. one timeslot configuredwith BCC and one timeslot configured with CCH).
Mandatory rules The mandatory rule must be: Dyn-SDCCH-Channel +SDCCH-channel <= 88 when one CCCH is present in the cell andDyn-SDCCH-Channel + SDCCH-channel <= 176 when 2 CCCH arepresent in the cell.
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 80 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / USD Cell Overview
External Comment —
454 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.19 (EGPRS Capability) - (EGPRS-Capability)
Alcatel EGPRS CapabilityParameter Name
Logical Name EGPRS-Capability
Definition This parameter indicates whether the TRE is able to support GPRSand/or EGPRS.
Coding rules bit 0: Cs1 Only ;bit 1: Cs1Cs2 ; bit 2: Cs1Cs4 ; bit 3:Cs1Cs4Mcs1Mcs9 ;bit 4: NoGprs
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Bitmapxd
SubSystem BTS
Instance TRE
Unit Minimum Maximum DefaultValue
- None None None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment –
3BK 21253 AAAA TQZZA Ed.07 455 / 492
6 GPRS 0&M Parameters
6.2.20 (Generation) - (BSC_Generation (MFS))
Alcatel GenerationParameter Name
Logical Name BSC_Generation (MFS)
Definition This parameter indicates the generation of the BSC in MFSsubsystem.
Coding rules This parameter is deduced from the parameter BSC_Generation(BSC): 2: G2 BSC 3: BSC Evolution
Mandatory rules BSC-Generation (BSC) = BSC_Generation (MFS)—
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance BSC
Unit Minimum Maximum DefaultValue
- 2 3 2
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSS parameters / BSS HW info
External Comment —
456 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.21 (GIC-Code-Atrk) - (GIC-Code-Atrk)
Alcatel GIC-Code-AtrkParameter Name
Logical Name GIC-Code-Atrk
Definition GPRS Identity Code of channel 0 for an A-trunk carrying GPRStraffic; the GIC of any channel of an A-trunk is deduced by adding theA-channel number to the GIC of channel 0
Coding rules Top 11 bits contain the trunk identity, other 5 bits (least significantbits) set to 0; thus numbered 0020h, 0040h, etc
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem BSC
Instance Ater(Mux)
Unit Minimum Maximum DefaultValue
- 0 FFFFh None
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / TTP
External Comment –
3BK 21253 AAAA TQZZA Ed.07 457 / 492
6 GPRS 0&M Parameters
6.2.22 (GPRS Capability) - (GPRS-Capability)
Alcatel GPRS CapabilityParameter Name
Logical Name GPRS-Capability
Definition This parameter indicates whether the sector is able to support GPRS.
Coding rules 1=supportedByHW, 2=notSupportedByHW, 3..254=not used,255=unknown
Mandatory rules if GPRS-Capability=notSupportedByHW, then the cell mapped onthe sector (if any) cannot have EN_GPRS=True.
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance Sector
Unit Minimum Maximum DefaultValue
- 1 255 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Additional information
External Comment —
458 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.23 (GPRS Granularity) - (AterMux-GPRS-Usage)
Alcatel GPRS GranularityParameter Name
Logical Name AterMux-GPRS-Usage
Definition This parameter indicates for an AterMux carrying GPRS trafficwhether it is dedicated to GPRS or not (i.e. dedicated GPRS ormixed CS-GPRS)
Coding rules 0 : dedicated GPRS, 1 : mixed CS-GPRS
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance AterMux
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / Ater configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 459 / 492
6 GPRS 0&M Parameters
6.2.24 (GPRS granularity) - (GPRS-Capacity)
Alcatel GPRS granularityParameter Name
Logical Name GPRS-Capacity
Definition This parameter gives, in case of a mixed AterMux(AterMux-GPRS-Usage=’mixed’), the percentage of channelsreserved for GPRS.
Coding rules Possible values are: 0%, 12.5%, 25%, 37,5%, 50%, 75%, 100%Forced to 100% for EDGE
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance AterMux
Unit Minimum Maximum DefaultValue
% 0 100 0
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / Ater configuration
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
460 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.25 (GSL channel) - (GSL-On-Atrk)
Alcatel GSL channelParameter Name
Logical Name GSL-On-Atrk
Definition This flag indicates whether or not a GSL is configured on the A-trunk
Coding rules 0 : no GSL on the A-trunk, 1 : a GSL is configured on the A-trunk
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Flag
SubSystem BSC
Instance Trunk
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / Ater configuration
External Comment –
3BK 21253 AAAA TQZZA Ed.07 461 / 492
6 GPRS 0&M Parameters
6.2.26 (IP Address) - (MFS-IP-Address)
Alcatel IP AddressParameter Name
Logical Name MFS-IP-Address
Definition This parameter gives the IP address of the MFS.
Coding rules String of ?? Characters. *: default: empty string
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 255 *
Modifiable OMC Changes: OAM RNO Changes: No
Parameter Access DCN Management / Add a MFS
External Comment –
462 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.27 (Lapd on Circuit Group) - (GSL_TEI)
Alcatel Lapd on Circuit GroupParameter Name
Logical Name GSL_TEI
Definition LapD Terminal Endpoint Identifier for the GSL.
Coding rules Always 1.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem MFS
Instance GSL
Unit Minimum Maximum DefaultValue
- 1 1 1
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM/A/Ater & Abis Interface / Ater TP level
External Comment –
3BK 21253 AAAA TQZZA Ed.07 463 / 492
6 GPRS 0&M Parameters
6.2.28 (MFS) - (Inventory-MFS)
Alcatel MFSParameter Name
Logical Name Inventory-MFS
Definition Inventory of all rack/subrack/slots EEPROM in addition with all staticHW information set at installation time as NO Remote Inventory data.
Coding rules File Name at OMC: mfs<MFSId>_amerie.csv
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Reference
SubSystem OMC
Instance MFS
Unit Minimum Maximum DefaultValue
- - - -
Modifiable OMC Changes: No RNO Changes: No
Parameter Access ???
External Comment —
464 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.29 (MFS Id) - (MFS_ID)
Alcatel MFS IdParameter Name
Logical Name MFS_ID
Definition This parameter gives a unique identification of an MFS within thecomplete network.
Coding rules step of one
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 500 999 500
Modifiable OMC Changes: No RNO Changes: No
Parameter Access MFSUSM / Controller
External Comment Default value depends on configuration. The value indicated hereis for implementation purposes.
3BK 21253 AAAA TQZZA Ed.07 465 / 492
6 GPRS 0&M Parameters
6.2.30 (MFS Version) - (MFS_VERSION (MFS))
Alcatel MFS VersionParameter Name
Logical Name MFS_VERSION (MFS)
Definition This parameter identifies the version of the MFS.
Coding rules <HHHH><C><D><EE>.<EE><F> with <HHHH>=MFSS for MFS HW,IMFS for I-MFS HW <C>=’A’ <D>=’T’ for B7.1 and B7.2 <EE> = mfssoftware version (numeric) <F> = correction indicator (alphabetic)
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem MFS
Instance MFS
Unit Minimum Maximum DefaultValue
- 0 255 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access MFSUSM / Controller
External Comment –
466 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.31 (Nb DR TRE) - (TCU-DR-TRE)
Alcatel Nb DR TREParameter Name
Logical Name TCU-DR-TRE
Definition This parameter gives the number of DR TRE mapped on a TCU.
Coding rules step of one
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TCU
Unit Minimum Maximum DefaultValue
- 0 2 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / Display Free TSU Resources
External Comment This parameter is not used for BSC Evolution
3BK 21253 AAAA TQZZA Ed.07 467 / 492
6 GPRS 0&M Parameters
6.2.32 (Nb FR TCU) - (TCU-FR-TRE)
Alcatel Nb FR TCUParameter Name
Logical Name TCU-FR-TRE
Definition This parameter gives the number of FR TRE mapped on a given TCU.
Coding rules step of one.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TCU
Unit Minimum Maximum DefaultValue
- 0 4 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / Display Free TSU Resources
External Comment This parameter is not used for BSC Evolution
468 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.33 (nsei) - (CELL_NSEI)
Alcatel nseiParameter Name
Logical Name CELL_NSEI
Definition This parameter identifies the nse associated to the GPU thatcurrently handles the concerned cell.
Coding rules Value 0: cell not mapped.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 65535 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show GPRS Nsei
External Comment —
3BK 21253 AAAA TQZZA Ed.07 469 / 492
6 GPRS 0&M Parameters
6.2.34 (PDCH Group) - (PDCH-Group-Size)
Alcatel PDCH GroupParameter Name
Logical Name PDCH-Group-Size
Definition This parameter gives the size in term of Radio Time slot (RTS) ofthe PDCH group.
Coding rules step of one
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance TRX
Unit Minimum Maximum DefaultValue
- 0 8 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment —
470 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.35 (R) - (Resel-Char)
Alcatel RParameter Name
Logical Name Resel-Char
Definition This parameter allows to characterise an adjacency to Reselectiontype.
Coding rules 0 = False = No Reselection link on the adjacency 1 = True =Reselection link on the adjacency
Mandatory rules 1 (Reselection link on the adjacency) cannot be used if the targetcell is a GAN cell.
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem OMC
Instance adj
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: PRC & SC RNO Changes: No
Parameter Access Edit Adjacency / 2G
External Comment –
3BK 21253 AAAA TQZZA Ed.07 471 / 492
6 GPRS 0&M Parameters
6.2.36 (Sector) - (SECTOR_NUMBER (MFS))
Alcatel SectorParameter Name
Logical Name SECTOR_NUMBER (MFS)
Definition Sector Number on which the cell is mapped.
Coding rules —
Mandatory rules Equal to Sector-Number (BSC)
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance Sector
Unit Minimum Maximum DefaultValue
- 1 6 None
Modifiable OMC Changes: PRC only RNO Changes: No
Parameter Access —
External Comment —
472 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.37 (SGSN IP Endpoint Id) - (SGSN_IP_ENDPOINT_ID)
Alcatel SGSN IP Endpoint IdParameter Name
Logical Name SGSN_IP_ENDPOINT_ID
Definition Remote IP Endpoint identifier
Coding rules —
Mandatory rules Each couple (IP address, port) must be unique per GPU/NSE.
Recommended rules The maximum number of remote IPEndPoint per NSE is 16; eachIPEndPoint has to be unique in a NSE.
Category Site (CAE)
Type Number
SubSystem MFS
Instance SGSN-IPEndpoint
Unit Minimum Maximum DefaultValue
- 1 16 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access MFSUSM / GB Configuration
External Comment An SGSN IP ENDPOINT is defined by an IP address and a port.
3BK 21253 AAAA TQZZA Ed.07 473 / 492
6 GPRS 0&M Parameters
6.2.38 (TC-Transparency) - (TC-Transparency)
Alcatel TC-TransparencyParameter Name
Logical Name TC-Transparency
Definition This parameter indicates for a mixed CS-GPRS AterMux whether thetranscoder is configured for Gb usage. (This is to avoid unnecessaryTC reconfiguration.)
Coding rules 0 : SM-ADAPT and TC-ADAPT not transparently configured; 1 :SM-ADAPT and TC-ADAPT transparently configured
Mandatory rules –
Recommended rules TC-Transparency=TRUE in case of MT120 use
Category Site (CAE)
Type Flag
SubSystem BSC
Instance AterMux
Unit Minimum Maximum DefaultValue
- 0 1 1
Modifiable OMC Changes: MFS RNO Changes: No
Parameter Access MFSUSM / Ater configuration
External Comment –
474 / 492 3BK 21253 AAAA TQZZA Ed.07
6 GPRS 0&M Parameters
6.2.39 (User label) - (Alarm-Friendly-Name)
Alcatel User labelParameter Name
Logical Name Alarm-Friendly-Name
Definition It is the friendly name notified to the operator in an alarm to identifythe element in failure.
Coding rules The friendly name is the concatenation of all the user labels from theobject in failure to the managed element following the containing tree.
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Reference
SubSystem OMC
Instance Alarm
Unit Minimum Maximum DefaultValue
- none none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access MFSUSM / Display Alarms
External Comment –
3BK 21253 AAAA TQZZA Ed.07 475 / 492
6 GPRS 0&M Parameters
6.3 System (CST)
6.3.1 (—) - (EQUIPMENT_ID)
Alcatel —Parameter Name
Logical Name EQUIPMENT_ID
Definition Gives the identifier of rack or sub-rack. It is used in the alarm to notifythe equipment in failure
Coding rules for the rack: it is always 1 (only one rack) for the sub-rack: from 0to 3 ( possibility of 4 sub-racks).
Mandatory rules –
Recommended rules –
Category System (CST)
Type Number
SubSystem MFS
Instance Eqt Holder
Unit Minimum Maximum DefaultValue
- 0 4 None
Modifiable OMC Changes: No RNO Changes: No
Parameter Access MFSUSM / Display Alarms
External Comment –
476 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7 EGPRS 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 477 / 492
7 EGPRS 0&M Parameters
7.1 Site (CAE)
7.1.1 (—) - (N_EXTRA_ABIS_TS_MAIN)
Alcatel —Parameter Name
Logical Name N_EXTRA_ABIS_TS_MAIN
Definition This parameter gives the number of Extra TS configured on the mainsector of a cell.
Coding rules Equal to the N-Extra-Abis-TS parameter of the BTS on which themain sector is mapped. If the cell is not shared, the associatedsector is by default the main.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 60 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
478 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7.1.2 (—) - (N_EXTRA_ABIS_TS_SECONDARY)
Alcatel —Parameter Name
Logical Name N_EXTRA_ABIS_TS_SECONDARY
Definition This parameter gives the number of Extra TS configured on thesecondary sector of a cell.
Coding rules Equal to the N-Extra-Abis-TS parameter of the BTS on which thesecondary sector is mapped. If the cell is not shared, equal to 0.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem MFS
Instance cell
Unit Minimum Maximum DefaultValue
- 0 60 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment —
3BK 21253 AAAA TQZZA Ed.07 479 / 492
7 EGPRS 0&M Parameters
7.1.3 (Effective Modulation Delta Power) -(Effective-Modulation-Delta-Power)
Alcatel Effective Modulation Delta PowerParameter Name
Logical Name Effective-Modulation-Delta-Power
Definition This parameter gives the difference between maximum effectiveGMSK output power (per sector and per band) lessen with theBS_TXPWR_MAX value, the effect of cell shared alignment; and themaximum 8Psk output power of the TRE.
Coding rules coded in tenth of dB. At operator level, the parameter is displayedwith an accuracy of 0.1 dB. Example: 2.3 dB coded 23. In case ofnon 8Psk capable TRE, Effective-Modulation-Delta-Power is notcomputed.
Mandatory rules The OMC computes this parameter as follows [in termsof coded values]: If the TRE is in the main sector:Effective-Modulation-Delta-Power = max (0, (Modulation-Delta-Power20* BS_TXPWR_MAX)) If the TRE is in the secondary sector:Effective-Modulation-Delta-Power = max (0, (Modulation-Delta-Powermax (0, 10*(Max-Power-Per-Sector-<band>secondary -Max-Power-Per-Sector-<band>primary + 2* BS_TXPWR_MAX))))Notes: <band> is GSM or DCS; 10 and 20 factors are necessarybecause on one hand Modulation-Delta-Power is expressed in 1/10dB and the other parameters are expressed in dBm, and on the otherhand BS_TXPWR_MAX is coded by 2 dB steps. This parameter isonly valid for outer TRE
Recommended rules —
Category Site (CAE)
Type Number
SubSystem OMC
Instance TRE
Unit Minimum Maximum DefaultValue
dB 0 none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment This parameter is displayed by the OMC in the Cell HSDS SynthesisView (with HMI name=Effective Modulation Delta Power). Thisparameter does not take care of PWR_adjustment although theEffective-Modulation-Delta-Power is decreased by the adjustment(value of PWR_adjustment). Attenuation applies on GMSK power,reducing de facto the Effective-Modulation-Delta-Power. If it cannotbe computed because the TRE is not 8PSK capable, then OMCdisplays not available.—
480 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7.1.4 (Max Extra TS Primary link) - (Max-Extra-TS-Primary)
Alcatel Max Extra TS Primary linkParameter Name
Logical Name Max-Extra-TS-Primary
Definition This parameter gives the number max of Extra Abis TS to configurefor HSDS on the primary Abis link. The additional Extra TS (beyondthe max) shall be configured on the second Abis. This parameter ismeaningful only in case of 2 Abis.
Coding rules –
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 31 31
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment –
3BK 21253 AAAA TQZZA Ed.07 481 / 492
7 EGPRS 0&M Parameters
7.1.5 (Nb Extra TS) - (TCU-Extra-TS)
Alcatel Nb Extra TSParameter Name
Logical Name TCU-Extra-TS
Definition This parameter gives the number of extra TS configured on a TCU.
Coding rules step of 1
Mandatory rules —
Recommended rules –
Category Site (CAE)
Type Number
SubSystem BSC
Instance TCU
Unit Minimum Maximum DefaultValue
- 0 8 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access BSSUSM / Display Free TSU Resources
External Comment This parameter is not used for BSC Evolution
482 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7.1.6 (N-Extra-Abis-TS) - (N-Extra-Abis-TS)
Alcatel N-Extra-Abis-TSParameter Name
Logical Name N-Extra-Abis-TS
Definition Number of extra Abis (64k) timeslots configured for a BTS.
Coding rules Step of one.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 60 0
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access BSSUSM / Sector TRE Mngt Panel
External Comment —
3BK 21253 AAAA TQZZA Ed.07 483 / 492
7 EGPRS 0&M Parameters
7.1.7 (Physical Delta Power) - (Modulation-Delta-Power (BTS))
Alcatel Physical Delta PowerParameter Name
Logical Name Modulation-Delta-Power (BTS)
Definition This parameter gives the difference between maximum effectiveGMSK output power (per sector and per band) and the maximum8Psk output power of the TRE.
Coding rules coded in tenth of dB. Example: 2.3 dB coded 23. In case of non 8Pskcapable TRE, Modulation-Delta-Power = ’FF’.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BTS
Instance TRE
Unit Minimum Maximum DefaultValue
dB 0 none none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment The OMC displays this parameter within the Edit BTS/Add.Infoscreen, under the HMI name "Physical Delta Power". In case theTRE is not 8PSK capable, the displayed value is unknown. Thisparameter does not take into account the fine adjustment.
484 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7.1.8 (Pool Status) - (Extra-TS-Pool-Status)
Alcatel Pool StatusParameter Name
Logical Name Extra-TS-Pool-Status
Definition This parameter gives, per Cell, the status of pool.
Coding rules 0: unavailable ; 1: partly-available ; 2: available (0): UsableExtra TS Main and secondary = 0 (1): Usable Extra TS Main orsecondary(<>0)<N-Extra-Abis-TS (2): Usable Extra TS Main orsecondary(<>0)=N-Extra-Abis-TS
Mandatory rules –
Recommended rules –
Category Site (CAE)
Type Number
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 2 none
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment –
3BK 21253 AAAA TQZZA Ed.07 485 / 492
7 EGPRS 0&M Parameters
7.1.9 (Second Abis Position Number) -(BTS-Second-Abis-Position-Number)
Alcatel Second Abis Position NumberParameter Name
Logical Name BTS-Second-Abis-Position-Number
Definition Position of the BTS on second A-bis.
Coding rules Always the last position on second Abis. 0 if not second Abis.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 0 15 last position
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
486 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7.1.10 (Secondary Abis Link) - (Secondary-Abis-Link-Number)
Alcatel Secondary Abis LinkParameter Name
Logical Name Secondary-Abis-Link-Number
Definition This parameter gives, when it exists, the Abis link number of thesecondary Abis link.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance BTS
Unit Minimum Maximum DefaultValue
- 1 176 1
Modifiable OMC Changes: EML RNO Changes: No
Parameter Access Create/Modify/Copy/Move BTS / Basic
External Comment —
3BK 21253 AAAA TQZZA Ed.07 487 / 492
7 EGPRS 0&M Parameters
7.1.11 (Usable TS) - (Usable-Extra-TS-Main)
Alcatel Usable TSParameter Name
Logical Name Usable-Extra-TS-Main
Definition This parameter indicates the number of Extra Abis TS usable for themain BTS of a cell shared or for the BTS of a cell not shared.
Coding rules —
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 60 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment –
488 / 492 3BK 21253 AAAA TQZZA Ed.07
7 EGPRS 0&M Parameters
7.1.12 (Usable TS) - (Usable-Extra-TS-Secondary)
Alcatel Usable TSParameter Name
Logical Name Usable-Extra-TS-Secondary
Definition This parameter indicates the number of Extra Abis TS usable for thesecondary BTS of a cell shared.
Coding rules Shall be set to 0 if cell not shared.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Number
SubSystem BSC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 60 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access RNUSM / Show Cell HSDS synthesis
External Comment —
3BK 21253 AAAA TQZZA Ed.07 489 / 492
7 EGPRS 0&M Parameters
490 / 492 3BK 21253 AAAA TQZZA Ed.07
8 DTM 0&M Parameters
8 DTM 0&M Parameters
3BK 21253 AAAA TQZZA Ed.07 491 / 492
8 DTM 0&M Parameters
8.1 Site (CAE)
8.1.1 (—) - (DTM-Capability)
Alcatel —Parameter Name
Logical Name DTM-Capability
Definition This parameter indicates whether the cell is DTM-capable or not.This parameter is introduced for 3G2G HO/reselection purpose. TheUTRAN chooses preferably a 2G cell DTM capable.
Coding rules DTM-Capability = (EN_DTM=TRUE) && (the supporting BSC isassociated to an MFS). EN_DTM is a Telecom parameter definedin the BTP.
Mandatory rules —
Recommended rules —
Category Site (CAE)
Type Flag
SubSystem OMC
Instance cell
Unit Minimum Maximum DefaultValue
- 0 1 0
Modifiable OMC Changes: No RNO Changes: No
Parameter Access —
External Comment This parameter exported from RNL in ACIE format is used by UTRANOMC.
492 / 492 3BK 21253 AAAA TQZZA Ed.07