b gravograph

www.krisbow.com 1www.kawanlama.com

2 www.kawanlama.com

MANUAL ROTARY MACHINE

SMALL ROTARY MACHINE

IM3

TXL

M20 M40 M40G

Specifications : IM3 TXL

PackagingSize : 580 x 510 x 280 mmNet weight : 11 kgGross weight : 13,6 kg

Size : 770 x 620 x 660 mmNet weight : 50 kgGross weight : 66 kg

PantographNumber of reduction ratios 25character reduction from1/2 To 1/7

Number of reduction ratios 25character reduction from1/2 To 1/7

Spindle and spindle motor power

Motor technology : universalSpindle rotation 18000 r.p.m.Cutter diameter 3.17 mm

Motor technology :asynchronous motorRotary speed 1 : 9500 r.p.m.Rotary speed 2 : 18000 r.p.m.Speed change :Manual by pulley/beltCutter diameter 4.36 mm

Engraving depth

Depth setting micrometric vernier with depth Regulating nose,Precision 0.025 mm

Setting micrometric indexPrecision 0.025 mm

Table Copy slide 150 x 405 mm Copy slide 150 x 405 mm

Optional accessories

• Special holding jigs• Vice for cylindrical items 65 mm ø• Depth regulating noses• Copy slides• Over 40 character fonts

• 500 mm tubular pedestral• Cup vice for cylinders up to Diameter 200 mm• Large-capacity vice for plates up to 335 mm in width• Prehension jigs• Depth regulating noses• Copy slides• More than 40 international character fonts availables

Specifications : M20Machine size/dimensions 310 X 340 x 310 mm

PowerConsumption 180 Watt

Spindle

- Diameter 3,17 mm hollow shaft (Gravograph patented innovation)- Brushless motor 20000 rpm- Spindle pressure adjustment

Weight Machine : 10 kgEngraving area 100 X 100 mm

Z Stroke30 cmClearance (nose to bottom of vice) : 40 mm

Self centering vice

Max opening capacity : 105 mm

Flatness 0.1 mm

Repeatibility 0.05 mmPen attachment Maximum diameter : 20 mm

Noise level

- Standby : LA eq = 51 dB(A) (± 1)- Engraving = LA eq = 69 dB(A) (± 2)- Peak in engraving Lp cpeak = 89 dB(C)

Specifications : M40 M40GMachine size/ dimensions 550 X 510 x 320 mm 730 X 540 x 540 mm

Engraving area 305 X 210 mm (A4+) 305 X 210 mm (A4+)

Weight Vice version : 18 kgTable version : 19 kg Machine : 35 kg

Z Axis

40 mm- Vice : unlimited x 5 x 21 cm- Table : 33 x 3.5 X 26 cm

40 mm- Motorized vice : 45 x 24 x 19 cm- Cylinder : ø 17 cm- Length : 45 cm- Cone : ± 10º

PowerConsumption - 125 Watt - 125 Watt

Sound level

- Off load : LA eq dB(A) < 73- Nominal engraving : LA eq dB(A) 80+/- 2- Peak when engraving : Lp cpeak dB (C) < 95

- Off load : LA eq dB(A) < 73- Nominal engraving : LA eq dB(A) 80+/- 2- Peak when engraving : Lp cpeak dB (C) < 95

Accessories

• Vice • Flat work table• Pen attachment• Range of jigs• Range of depth regulating noses• Chip collector

• Pen engraving device• Range of jigs• Range of depth regulating noses• Chip collector


MEDIUM ROTARY MACHINE

IS400 IS400 Volume

IS200IS200 TX

Specifications : IS200 / IS200 TX IS400 IS400 VOLUME

X and Y Axes Engraving area : 80 x 225 mm Engraving area : 305 x 210 mm Engraving area : 305 x 210 mm

Z Axis

Spindle travel 15 mmSpindle travel at bottom of vice :48 mm (IS200), 210 mm(IS200 TX)

Spindle travel 40 mmSpindle travel at bottom of vice120 mmMax. spindle travel with clamping table 33 mm

Spindle travel 40 mmMax. spindle travel at bottom of vice400 mm

PowerConsumption 90 Watt 300 Watt 300 Watt

SpindleTool diameter 4.36 mmRotation speed 17000 rpmMotor power : DC 20 W

Tool diameter 4.36 mmRotation speed 11-20000 rpmMotor power : DC 70 W

Tool diameter 4.36 mmRotation speed 11-20000 rpmMotor power : DC 70 W

PackagingNet weight : IS200 : 22 kg IS200 TX : 52 kg

Net weight : 50 kg Net weight : 90 kg

Noise level

Empty : LA eq dB(A) < 60 ±1When engraving : LA eq dB(A) 81 ±2Peak when engraving :Lp cpeak dB(C), <105In accordance with gravograph standards

Empty : LA eq dB(A) < 72 ±1When engraving : LA eq dB(A) 80 ±2Peak when engraving :Lp cpeak dB(C), <95In accordance with gravograph standards

Empty : LA eq dB(A) < 72 ±1When engraving : LA eq dB(A) 80 ±2Peak when engraving :Lp cpeak dB(C), <95In accordance with gravographstandards


• 15 mm diameter pen vice• Jewellery vice and prehension jigs• Range of spindles and depth regulating noses• Divider ice for cylinders with maximum diameter 200 mm• Range of mandrel and cones for cylinder prehension• Glass engraving kit

• 380 X 280 mm clamping table• Volume base and 350 mm ø cylinder drive• 15 mm ø pen drive• 120 mm ø cylinder drive• Glass engraving kit• Range of spindles (Collet, diamond, HF)• Relay kit box• Lubrication system

• Clamping table• 15 mm ø pen drive• 120 mm ø cylinder drive• 350 mm ø cylinder drive• Glass engraving kit• Range of spindles (Collet, diamond, HF)• Automatic input / output control• Lubrication system

4 www.kawanlama.com

IndustrialLARGE ROTARY MACHINE

IS900

Specifications : IS900

X & Y Ax1s

- Engraving Area 635 X 432 mm- Table Surface 660 X 450 mm- Flatness Tolerance 0.2 mm Maximum Clearance In Y axis Unlimited- Maximum Engraving Speed 100 mm/S Max. Dimension Of The Item To Be Engraved

Z Axis- Spindle Travel 80 mm- Spindle Clearance With Clamping Table 80 Mm

Spindle

- Tool Diameter 4.36 mm- Rotation Speed 13-20000 rpm- Servo Motor 90W Advanced Functions As Standard- Automatic Z Ref- Point & Shoot- iQ+ Terrain Follower

Clamping Device Aluminum T-Slot Table Streamlined Clamping

Noise Level

- Respects Iso 11201- Empty * La Eq Db(A) <72±1- When Engraving * La Eq Db(A) 80±2- Peak When Engraving * Lp Cpeak Db(C) <95* In Accordance With Gravograph Standards

Net Weight - 90 Kg

Optional Accessories

- 200 Watt Continuous Power Spindle Motor- Collets Spindle- 150 W Regulated Hfs Spindle- Concentric Tightening Vice- Lubrication System- Chip Collector- Machine Stand- Automatic Braille Dispenser


IndustrialPOWERFULL ROTARY MACHINE

CO2 Laser

IS7000/IS8000

LS100 LS100EX LS900

IS7000 XP / IS8000 XP

Specifications : IS7000/IS8000 IS7000 XP/IS8000 XPX & Y Axis Engraving area 610 x 815 mm/610 x 1220 mm Engraving area 610 x 815 mm/610 x 1220 mm

Z Axis Spindle travel 80 mmSpindle clearance with clamping table 80 mmSpindle clearance with vice 140 mm

Spindle travel 80 mmSpindle clearance with clamping table 80 mmSpindle clearance with vice 140 mm

SpindleTool diameter 4,36 mmRotation speed 13-20000 tr/mnServo motor 70 W

Tool diameter 4,36 mmRotation speed 13-20000 tr/mnTool clamping with a collet, servo motor 200 w

Noise level – according toISO 11201 regulation

Empty LA eq dB(A) <72±1When engraving LA eq dB(A) 80±2Peak when engraving Lp cpeak dB(C) <95* In accordance with gravograph standards

Empty LA eq dB(A) <72±1When engraving LA eq dB(A) 80±2Peak when engraving Lp cpeak dB(C) <95* In accordance with gravograph standards

Net weight IS7000 : 220 kgIS8000 : 265 kg

IS7000 XP : 230 kgIS8000 XP : 280 kg


- 200 Watts continuous power spindle motor- Concentric tightening vice- Cylinder attachment ø 120 mm- Range of spindles (collet, diamond, HF)- Automatic input/output control- Lubrication system

- Standard concentric tightening vice- Industrial vice- 300 W high frequency spindle- Complete range of spindles (standard, collet, diamond, HF)- Automatic input/output control- Table supports- Protection strips for cutting out operations

Specifications : LS100 / LS100EX LS900

Engraving capacitiesEngraving area LS100 : 460 x 305 mm (18 x12”)Engraving area LS100EX : 610 x 305 mm (24 x 12”)Z axis travel : 145 mm (5.71”)

Engraving area : 610 x 610 mm (24 x 24”)Z axis travel : 250 mm (9.84”)

Size and weight

Dimensions LS100 : 760 x 440 x 725 mm (30 x 18 x 29”)Dimensions LS100EX : 1025 x 725 x 450 mmWeight LS100 : 43 kgWeight LS100EX : 70 kg

Dimensions : 1080 x 810 x 945 mm (37 x 32 x 42”)Weight : 180 kg (400 lbs)

Laser

Co² laser source (10,6 µm)Power range LS100 : 30 WPower range LS100EX : 30, 40, 55 WSafety CDRH class 2 (EN60825)

Co² laser source (10,6 µm)Power range 30, 40, 60 and 80 WSafety CDRH class 2 (EN60825)

Energy and power supply

100V-240V AC supplyMax. Speed LS100EX : 2,54 m/sec

100V-240V AC supply (30 and 40 W)200V-240V AC supply (60 and 80 W)

Option and Accessories

- Integrated and various independent exhaust systems- Alternate lenses (1.5, 2.5, 3.5, 4” Focal length)- Honeycomb cutting table- Floating pin table h = 30 mm (1.18”)- Integrated compressor for air assist- Rotary device to engrave round parts, Maximum dia. 130 mm (5.1”)

- Base stand, mecano-welded- Integrated exhaust system, with pre-filter, Z filter, and active carbon filter (replaces the machine base)- Various independent exhaust options- Alternate lenses (1.5, 2.5, 3.5, 4” Focal length)- Honeycomb cutting table- Floating pin table (h = 30 mm)- Integrated compressor for air assist- Rotary device to engrave round parts (max ø200 mm, L = 483 mm,Weight = 10 kg (7.9” Diameter, 16.3” Length, 19.8 lbs)

6 www.kawanlama.com

Multi Applications

Multi Applications

GALVANOMETRIC LASER YAG

FIBRE LASER

Specifications : YAG200Weight anddimensions

- Enclosure dimensions : 590 x 827 x 806 mm

Laser included- Enclosure weight: 75 kg- CCU dimensions: 483 x 184 x 376 mm- CCU weight: 21 kg

Laser

- Diode pumped laser: 1064 nm- Average power: 12 W- Peak power: > 25 KW- Security: CDRH class 1 (EN60825)

Utilityrequirements

- Power supply 115/240 V AC- No external cooling system

Interface

- Laserstyle 5 graphic level- OS : Windows XP, Vista- Options :- Fume and dust extractor- Cylindrical attachment- Integrable version (without enclosure)- Customised enclosure- Numerical Z axis display- Focusing pointer- GravoStyle 5

Marking capacities- Z range up to 280mm- Working table with marking areas in red

Specifications : FIBRE100/FIBRE200

Size and weight

- Casing dimensions : 590x827x806mm- Casing weight : 75kg- CCU dimensions : 483x184x376 mm- CCU weight : 17kg

Fibre100/Fibre200 lasers

- Pulsed Fibre Laser 1,064 nm- Average power : 10 W / 20 W- Peak power : 6 KW / 12 KW- Safety : CDRH class 1 (EN60825)

Energy andpower supply

- 110V-240V AC supply- No external cooling system

Interface

- Laserstyle discovery- OS : Windows® 2000, XP or Vista- Optional accessories:- Exhaust system- Cylindrical attachment- OEM version (without casing)- Customised casing- Numerical Z Axis- Second red pointer for focusing- GravoStyle 5

Marking capabilities- Z stroke : 280mm- Working table

YAG200

LS100EX FIBRE

FIBRE100/FIBRE200

FIBRE200

Specifications : LS100EX Fibre

Engraving Capacities

Engraving Area : 610x305mm Z-Clearance : 145mmMaximum Item Size : 760x330x145mmMaximum Item Weight : 20 kgRaster speed : 1,50 m/s

Laser SourcePulsed fibre : -1,06pmPower : 20WSecurity : CDRH Class II

Interface Software Laserstyle Graphic as standard

Dimensions & Utilities Overall Machinesize : 1025x725x450mmNet weight : 75 kg

Optics * 2.0 in lens as standard* 3.0-4.0 in Optional

Machine Support Floor stand support which can integrate the ES device

Fumes Exhausts * ES10, ES30 (floor stand devices)* LE150HP (intergrated device)

Working Tables* Vacuum table for thin material* Floating pin tables* Honeycomb table

Cylindrical Attachment* Diam. 3-130mm* Max length item 500mm


Cutter Grinding MachineACCESSORIES

TABLE SHEARS FOR ENGRAVING MATERIALS

Specifications : CG30

PackagingNet weight 10.5 kgGross weight 12 kgDimensions 415 x 335 x 270 mm

Grinding Angles from 0 to 90ºTruncature without disassembling the collet holder

Grinding wheel

Abrasive : corundumFixing by nut – quick changeProtection housingRotation speed 10.000 rpm

Collets Diameters of the collets available 3.00 to 6.35 mm

CG30

CSM/CSP CSC

Specifications : Csp Plastics Csm Metals

Dimensions 530 x 380 x 240 mm 530 x 380 x 240 mm

Table area 345 x 300 mm 345 x 300 mm

Material recommended Plastics(ABS, PS, PVC)

Metals(aluminum, bross)

Maximum thickness 2.4 mm max. 1 mm max. or 2 mm max.

Maximum width 320 mm 320 mm or 155 mm

Outside stop 200 mm max. 200 mm max.

Inside stop 250 mm max. 250 mm max.

Net weight 11 Kg 11 Kg

Specifications : Csc for Corners

Dimensions 240 x 150 x 120 mm

Maximum thicknessAluminumBrassPlastics (ABS, PVC, PS Type)

0.8 mm0.8 mm3 mm

Blades Machined, ground and coated

Table thickness 9.5 mm

Net weight 1.5 kg

8 www.kawanlama.com

CIRCULAR SAW

Specifications : VA10 VA11 VA21-7 VA21-15

Saw Blade 24/32 toothed blade in tungsten carbide dia. 120x1.7mm

Swaft extraction device with collection bag

Automatic lubrication with tank mounted on a housing

Mobile stop

with spring operated return and graduated Rule to cut up to 200 mm widematerials

Dual stop (on right hand side)with spring Operated return andgraduated rule to supportthe material to be sawn

Dual stop (on right hand side) with spring mounted return and graduated ruleto support the material to be sawn

Side stop - (on left hand side) withadjustment and material support

(on left hand side) with adjustment andmaterial support

Universal motor 110 or 220 Volts – 50/60 Hz 110 or 220 Volts – 50/60 Hz

Max. cutting length 620 mm 665 mm 1030 mm

Max. cutting thickness- Plastics- Light metals- Aluminum profiles

6.3 mm4 mm-

7 mm5 mm15 mm

7 mm4 mm-

7 mm4 mm15 mm

Net weight 18 Kg 28 Kg 30 Kg 31 Kg

Gross weight 22 Kg 36 Kg 38 Kg 39 Kg

VA10

VA21

Material Cutter Machine


BEVELLING MACHINE

B4

B6

VA2

Specifications : VA2

Saw bladedia. 120 mmintegrated into a protection guard

Blade rotation 15.000 rpm

Universal motor 110 or220 volts – 50/60 Hz

Net weight 5 Kg

Gross weight 6 Kg

Specifications : B4 B6

Spindle On ball bearings dia. 3,17 mm On ball bearings dia. 6,35 mm

Cutters

2 cutters dia. 3.17 mm(steel or carbide)with 2 types of bevelling 45° and 90°

dia. 6.35 mm with 2 bevelling types 45° and 90°

Vertical travel 9 mm 4 mm

Horizontal travel 5 mm 15 mm

Spindle speed 14.000 rpm 24.000 rpm

Universal motor 110 or 220 volts 110 or 220 volts

Cast iron base 198 x 53 mm -

Net weight 6,5 Kg 8,2 Kg

Gross weight 8 Kg 9,5 Kg

Radius devices - 5-10 and 15 mm

Table - 450 x 90 mm

10 www.kawanlama.com

SMALL ROTARY MACHINEJewelry-Inside and Outside-Ring and Bracelet

Specifications : M20 JEWELMachine size 345 x 315 x 305 mmWeight 11,5 kg

Sound characteristics

Waiting for engraving : < 51 dB (A)Off load : < 60 dB (A)Nominal engraving : < 69 dB (A)Nominal engraving peak : < 89 dB (C)

Flat engravingFlat engraving (X-Y) : 100 x 100 mmSelf centering vice : 105 mm opening capacitySpindle clearance (Z) : 40 mm

Ring engravingcharacteristics

Min-max inside diameter : 12-24 mmMin-max outside diameter : 12,5-27 mmMin-max width : 1-20 mm

M20 JEWEL

M20 PEN

M20 PIX

Specifications : M20 PEN

Size 310 x 340 x 310 mm

Weight 10 Kg

Engraving area 100 x 100 mm

Pen attachmentMaximum diameter : 28 mmLength max : 160 mmLength min : 70 mm

Specifications : M20 PIX

Overall machine size 345 x 315 x 305 mm

Engraving area 100 x 100 mm

Weight 10 kg

Z Stroke 35 mm

Max dimensions of engraving object 115 x 200 x 42 mm

Engravable materialsgold, silver, copper, platinum,aluminum, stainless steel, etc.


MANUAL ROTARY MACHINE

RING ENGRAVING MACHINE

Jewelry-Inside and Outside-Ring and Bracelet

Easy to use

B-ENGRAVER

RING CUBE ENGRAVING M10 Jewel

Specifications : B-Engraver

Packaging Dimensions : 530 x 400 x 400 mmNet weight : 5.8 KgGross weight : 6.8 Kg

Pantograph Number of reduction ratios 1Character reduction from 1/5

Chuck with grip Grip type : concentricNumber of jaws : 3Rotation : automatic

Disc for types Material watch making quality brass

Copying stylus Material tempered steel

Engraving tool Material : diamond

Optional accessories • Set of standard jigs• Adjustable jaw for rings with large stones• Chrome brass disc for intensive use• Special stylus with tungsten carbide point for hard chrome discs

Specifications : Ring Cube Engraving

225 x 270 x 385 mm

7,5 kg

5,7” touch-screen

Automatically adjusted engraving height

Text and symbol engraving

Ring : width 1,5 - 8 mm ; Ø 12-25 mmBracelet : width 3-20 mm ; Ø 45-80 mmOptional outside ring/bracelet engraving accessories

< 60 dB

Standards : CE-RoHS

COMPACT ANDBEST VALUE

Specifications : M10 Jewel

Dimensions 230 x 293x 290 mm

Weight 6,5 kg

Maximal Engraving Precision 0,05 mm

Noise LevelEngraving : LAeq = 60 dB (A)

Peak when Engraving = Lp Cpeak = 81,3 dB (C )

Items to be engraved dimension

Rings

Internal Engraving : width = 1,5 – 8 mm, dia. 12 – 25 mm

External Engraving : width = 1,5 – 6 mm, dia. 13,5 – 25 mm

Bracelets

Internal Engraving : width = 3 – 20 mm, dia. 45 – 74 mm

External Engraving : width = 3 – 20 mm, dia. 50 – 80 mm

12 www.kawanlama.com

ACCESSORIES AND APPLICATION

www.kawanlama.comwww.kawanlamaonline.com

kls/p&

a.21

7/2k/tv.12

/nin.uni/11.12

Gravograph is the world’s leading manufacturer of marking solutions, offering of a full range of equipment: C.N.C. (Computer Numerical Controlled) engraving machines, CO2, Fibre and YAG lasers, engraving materials, consumables and services. For over 60 years, Gravograph has remained the industry benchmark thanks to its high quality equipment.

b gravograph

Documents