axial-flow 2013 combine and header compatibility guide...
TRANSCRIPT
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 1
Axial-Flow® 2013
Combine and Header
Compatibility Guide
This is a Sales Education document
not to be used for advertising.
Book: Grain Harvesting
Section: General
Form No.: GH-2147-12
Replaces: GH-2102-10
Date: September 2012
PR
OD
UC
T IN
FO
RM
AT
IO
N
PR
OD
UC
T IN
FO
RM
AT
IO
N
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 2
Axial-Flow Combine / Header Compatibility
Introduction For over 35 years, Case IH customers have come to expect great performance out of their Axial-
Flow combines, and the same goes for Case IH headers. Case IH headers play a very important
role in harvesting. Our Case IH engineers continue to enhance, refine and expand the header
lineup to provide Case IH customers the latest in header technology. This Product Information
piece details header compatibility of each header model as it relates to a specific Axial-Flow
combine.
Axial-Flow Combine and Header Compatibility, Including Commonly Ordered Conversion
Kits
Model Year 2013 Header Compatibility
5088/5130 6088/6130 7088/7130 7120/7230 8120/8230 9120/9230
2010 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft. 20, 25, 30 ft.
3020 20, 25, 30 ft. 20, 25, 30, 35 ft 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 20, 25, 30, 35 ft. 20, 25, 30, 35 ft.
3400 3406, 3408 3406, 3408, 3412 3406, 3408, 3412 3408, 3412 3408, 3412, 3416,
3418
3408, 3412,
3416, 3418
2600 2606 2606, 2608 2606, 2608 2608, 2612 2608, 2612 2608, 2612
2142 30 ft. 30, 35 ft 30, 35 ft. 30, 35 ft 30, 35 ft 30, 35 ft
2152 25 ft. 25, 30, 35 ft 25, 30, 35, 40 ft 25, 30, 35, 40 ft 25, 30, 35, 40,
45 ft
25, 30, 35, 40,
45 ft
2162 NA 30, 35 ft. 30, 35, 40 ft. 30, 35, 40, 45 ft. 30, 35, 40, 45 ft. 30, 35, 40, 45 ft.
3016 12 ft. 12 ft. 12, 15 ft 12, 15 ft 12, 15 ft 12, 15 ft
The chart above lists the recommended combine and header combinations for maximum
performance and productivity. The following pages contain information about converting combines
and headers to accept configurations not listed in the compatibility chart above, although
performance can be compromised in some conditions and applications.
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 3
Axial-Flow Combine / Header Compatibility
1010 – 20 ft. Version
Part Number Description
87746706 Electrical Adapter kit
87552504 Hydraulic Adapter kit
87336803 Sliding pin latch kit
125959A1 Slow down pulley
247426A1 Belt
87374406 Combine Feeder Face
1010 – 25 & 30 ft Version
Part Number Description
87746706 Electrical Adapter kit
87552504 Hydraulic Adapter kit
87336803 Sliding pin latch kit
125959A1 Slow down pulley
247426A1 Belt
87374406 Combine Feeder Face
1020 – 17.5, 20 & 22.5 ft Version
Part Number Description
87746706 Electrical Adapter kit
87552504 Hydraulic Adapter kit
87336803 Sliding pin Latch Kit
126012A1 Slow down pulley
87374406 Combine Feeder Face
1020 – 25 & 30 ft Version
Part Number Description
87746706 Electrical Adapter kit
87552504 Hydraulic Adapter kit
87336803 Sliding pin Latch Kit
126012A1 Slow down pulley
87374406 Combine Feeder Face
Conversion to enable 1010/1020 Grain Heads to fit 5088/6088/7088 & 5130/6130/7130 are listed
below.
1000 Series Grain Heads
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 4
Axial-Flow Combine / Header Compatibility
2010 and 2020 Grain Heads
2010 2020 Description
415074016 N/A Complete kit without header height control
415075016 415077016 Complete kit with auto header height (no Field Tracker)
415076016 415078016 Complete kit with auto header height and Field Tracker
Note: The above are ordered as Whole goods Factory Supplied Accessories. Additional
details of what is included in the kits are listed below.
Conversion to fit 2010 and 2020 platforms on a
21/23/25 series combine are listed below.
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 5
Axial-Flow Combine / Header Compatibility
3020 Flex Header
Kit Part Number Part Numbers and Descriptions
84480201* 21/23/2500 Series
Mechanical Components
Electrical Components
PTO Half Shaft
Instruction Manual
*Combine must be equipped with the following Other Required Kits listed below.
Other Required Kits or Components
87539791 Sliding Latch Pin Kit - With Field Tracker
87539793 Sliding Latch Pin Kit - Without Field Tracker
87301386E Hydraulic Connector – Single Point Hydraulic Hookup
Conversion Kit and other requirements to
fit 3020 Flex Header on a 21/23/2500
series combine are listed below.
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 6
Axial-Flow Combine / Header Compatibility
Conversions to fit 2200 and 3200 Corn Heads on 5088/6088/7088 & 5130/6130/7130
combines are listed below.
2200 and 3200 Corn Heads
Note: The row unit angle on the above conversion kits is not optimized which could
cause performance issues in some conditions. The front feeder face plate angle
may need to be adjusted to compensate for field conditions.
Part Number Description
84135007 Complete kit for 2206/3206 See Below for more detail.
84138594 Complete kit for 2208/3208 See Below for more detail.
84138597 Complete kit for 2212/3212 See Below for more detail.
Part Number Description
87473648 Latch kit for 70/8010, 20, 88 & 30 Series Feeder/Header Interface
87337673 Latch kit for legacy or 23/2500 Series Feeder/Header Interface (Header Parts for Sliding Pin
Latch). Not needed if header has already been updated to sliding Pin Latch design.
Order one of the above kits and one of the following latch kits.
Kit Part Number Part Numbers and Descriptions
2206/3206 5088/6088/7088 & 5130/6130/7130
84135007—> Yoke and Bearing Cross assembly
Sprocket 25T WA
Chain Drive
Spring
Quick Coupling
Elbow, 90 ADJ
Adapter Harness for Header Hookup
Plate, CYL Cover
Kit Includes Misc. Hardware
Kit Includes Hoses and Couplers
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 7
Axial-Flow Combine / Header Compatibility
2200 and 3200 Corn Heads (Continued)
Conversions to fit 2200 and 3200 Corn Heads on 5088/6088/7088 & 5130/6130/7130 Series
Combines are listed below.
Kit Part Number Part Numbers and Descriptions
2208/3208 5088/6088/7088 & 5130/6130/7130
84138594—> Yoke and Bearing Cross assembly
Sprocket 25T WA
Chain Drive
Spring
Quick Coupling
Elbow, 90 ADJ
Adapter Harness for Header Hookup
Plate, CYL Cover
Kit Includes Misc. Hardware
Kit Includes Hoses and Couplers
Kit Part Number Part Numbers and Descriptions
22128/3212 5088/6088/7088 & 5130/6130/7130
84138597—> Yoke and Bearing Cross assembly
Sprocket 25T WA
Chain Drive
Spring
Quick Coupling
Elbow, 90 ADJ
Adapter Harness for Header Hookup
Plate, CYL Cover
Kit Includes Misc. Hardware
Kit Includes Hoses and Couplers
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 8
Axial-Flow Combine / Header Compatibility
2200 and 3200 Corn Heads (Continued) Conversions to fit 2200/3200 Series Corn Heads on 7010/8010 & 7120/8120/9120 &
7230/8230/9230 combines are listed below.
Part Number Description
87041928 Complete kit for 2208/3208 See Below for more detail
87041425 Complete kit for 2212/3212 See Below for more detail.
Note: The row unit angle on the above conversion kits is not optimized which could cause performance issues in
some conditions. The front feeder face plate angle may need to be adjusted to compensate for field conditions.
2208/3208 7010/8010 & 7120/8120/9120 & 7230/8230/9230
87041928—> Drive Unit PTO A
Sprocket 30T WA
Chain Drive
Spring
Quick Coupling
Elbow, 90 ADJ
Plate, CYL Cover
Sensor, AHHC
Harness, 30 Foot
Kit includes Misc. Hardware
Kit includes Hoses and Couplers
2212/3212 7010/8010 & 7120/8120/9120 & 7230/8230/9230
87041425—> Drive Unit PTO A
Sprocket 30T WA
Chain Drive
Spring
Quick Coupling
Elbow, 90 ADJ
Plate, CYL Cover
Sensor, AHHC
Harness, 30 Foot
Kit includes Misc. Hardware
Kit includes Hoses and Couplers
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 9
Axial-Flow Combine / Header Compatibility
3400 Corn Heads
There are no provisions to adapt a 3400 series Corn Head to a 21/23/2500 series combine.
2600 Series Chopping Corn Heads
Part Number Description
87588414 Convert 2606 from 23/2500 to 88/10/20/30 Series
87588415 Convert 2606 from 88/130 series, 10/20/230 series to 23/2500 series
87588416 Convert 2608 from 23/2500 88/10/20/30 Series
87588417 Convert 2608 from 88/130 series, 10/20/230 series to 23/2500 series
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 10
Axial-Flow Combine / Header Compatibility
2052 & 2062 Draper Heads
Conversions to convert from one series combine to another, or if head was ordered with a
generic adapter, are listed below.
Part Number Description
87430799, 87430802, & 87430810 From 21/23/2500 to 88/130 series, 10/20/230 series (45” in-feed deck)
87461691 From 21/23/2500 to 88/130 series, 10/20/230 series (56” in-feed deck) Complete kit
contains all electrical, hydraulic and mechanical connections.
87430800, 87430798, & 87430809 From 88/130 series, 10/20/230 series to 21/23/2500 series (45” in-feed deck)
2042 Draper Heads Conversions to convert from one series combine to another, or if head was ordered with a
generic adapter, as listed below.
Part Number Description
87430799, 87430802, & 87430810 From 21/23/2500 to 88/130 series, 10/20/230 series (45” in-feed deck)
87430809, 87430800, & 87430798 From 88/130 series, 10/20/230 series to 21/23/2500 series (45” in-feed deck)
2142/2152/2162 Draper Heads
Conversions to convert from one series combine to another, or if head was ordered with a generic
adapter, are listed below.
Part Number Description
87557886 Completing package for 88/130 series, 10/20/230 series
87563623 Completing package for 23/2500 series and 88/130 series with legacy 23/2500 feeder conversion
package installed
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 11
Axial-Flow Combine / Header Compatibility
2015 and 2016 Pickup Heads
2009 Model Year was the last build of the 2015 pickup head. The 2016 fits the 88/130
series, 10/20/230 series. No kits are available at this time to convert to a 21/23/2500 series.
3016 Pickup Head
Kit Part Number Part Numbers and Descriptions
84268190* Kit for 15ft 3016 21/23/2500 Series
84480830* Kit for 12ft 3016 21/23/2500 Series
Mechanical Components
Electrical Components
PTO Half Shaft
Instruction Manual
*Combine must be equipped with the following Other Required Kits listed below.
Other Required Kits or Components
87539791 Sliding Latch Pin Kit - With Field Tracker
87539793 Sliding Latch Pin Kit - Without Field Tracker
87301386E Hydraulic Connector – Single Point Hydraulic Hookup
Conversion Kit and other requirements to
fit 3016 Pickup Header on a 21/23/2500
series combine are listed below.
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 12
Summary Case IH headers continue to meet and exceed Case IH customer expectations in the areas of
performance and increased productivity. To further increase legacy Axial-Flow combines
productivity, Case IH has developed kits to allow new headers to be installed on prior model
combines. This allows legacy combines to take advantage of the new header designs.
Case IH engineering is not only supporting future Axial-Flow combines but also past models to
ensure there longevity and resale value for today and into the future.
Sell the Axial-Flow Advantage!
Axial-Flow Combine / Header Compatibility
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 13
NOTES
Axial-Flow Combine / Header Compatibility
Grain Harvesting GH-2147-12
9/21/2012 Case IH Product Information 14
The information presented herein is intended for sales education
purposes and is intended for the use of CNH America LLC, its
affiliates, and its independent dealers only. This information is to be
treated as CONFIDENTIAL and is not to be used for advertising
purposes. Competitive comparisons are based on competitive
information known at time of printing. Sources of information include
published industry specifications and data. General statements
made herein are the opinions of the authors concluded from
supporting data.
Note:
Specifications are stated in accordance
with industry standards or recommended
practices, where applicable.
Important:
CNH America LLC reserves the right to
change product specification without
notice and without incurring any
obligation relating to such changes.
Any trademarks referred to herein in
association with the goods and/or
services of companies other than
CNH America LLC are the property of
those respective companies.
Visit Case IH on the Web at
www.caseih.com
CNH AMERICA LLC
700 STATE STREET
RACINE, WI 53404 U.S.A.