awin engineering pte. ltd
TRANSCRIPT
Email: [email protected] Website: www.awin.com.sg
AWIN Engineering Pte. Ltd.
Established in 2010
ISO-9001 Certified
Engineering with Safety, Integrity and
Confidence
SUBSEA SERVICES
Email: [email protected] Website: www.awin.com.sg
INTRODUCTION
To achieve higher than expected results for our customers by enhancing the life
of people around with a responsibility of giving back to the society to earn a fair
return on the value we deliver.
MISSION
VISION
AWIN Engineering Pte. Ltd.
OSHAS 18001:2007
To diversify, develop and equip ourselves to be one of the most preferred EPC
Contractor in the areas of:
• Oil & Gas
• Renewable Energy
• Water & Waste Management • Power • Infrastructure
• Marine & Shipping
AWIN Engineering Pte. Ltd., was established in 2010 with a vision not just
follow a standard, but would also raise the existing standard of its services to
a greater height.
SUBSEA CAPABILITIES
Human Resources Safety Records
0
20000
40000
60000
80000
100000
120000
140000
160000
180000
200000
2016 2017 2018
LTI Free Hours
Midwater Archs Cable Tension Frames
Pile Sleeves Anchors
RESOURCES & SAFETY
Email: [email protected] Website: www.awin.com.sg
Umbilical Clamps
515
30
15
10 5
Project Management Engineering
Construction Blasting & painting
Installtion Commissioning
Email: [email protected] Website: www.awin.com.sg
ENGINEERING SERVICES
PROJECT EXECUTION CHART
Subsea Structure Engineering
➢ Engineering for transport, mobilisation and installation of subsea structures like Templates, Manifolds, Protection structures/covers, Spool pieces, Riser bases, Clump weights etc.
➢ Detailed design and fabrication
support for subsea structures, Spools, Installation Aids and Sea fastening
➢ Installation aid design for mooring,
flowline and structure installation scope
Subsea Pipeline Engineering
➢ Pipeline system basic & Detailed design
➢ Wall thickness, bottom
➢ roughness/free span, on-bottom stability, pipeline end expansion, cathodic protection
➢ Upheaval Buckling (UHB), Lateral Buckling and Pipeline Walking, Spool In-place Design, In-place Expansion and Buckling of Flexible Flowlines, Pipeline Pull-through Calcs, Pipe-in-Pipe Systems
➢ Installation Support for Rigid, Flexible and umbilical Bid & Procurement Support
➢ Bid Strategy and Proposal Development Cost Estimation
➢ Procurement Support & Specialist Procurement Outsourcing
➢ Vendor Inspection & Pre-qualification Audit
➢ Develop installation and mobilization procedures
Geotechnical Engineering
➢ Engineering & Fabrication of foundations and anchors for carbonate seabed
➢ Geotechnical and tensioning aspects related to design and installation of mooring systems
➢
Operation Director
Production Manager
Accounts/Finance BID/Proposal/Sales
Design
QA/QC
HSE
Operation Lead
Admin/HR
Projects
Maintenance Production Store/Logistics
Procurement
Pulling & Test Head
✓ 5” Flexible Pulling Head ✓ Profile Machining from Homogeneous Block ✓ Load test at 56 Te ✓ Design pressure 543.4 BARG
Project:
Gumut Kakap Ph2 Project
Client: Technip-FMC
Hang-Off Collar
✓ 10” Gas Export Riser ✓ Material: S355J2 ✓ Rolling ✓ Fabrication ✓ Machining ✓ Blasting & Painting ✓ Supply ✓ Weight 522 kg
Project:
4047-Layang Development
Client: Technip-FMC
Engineering – Procurement – Construction
A & R Head Centraliser
✓ 10” 1st End Flexible Riser
Project:
ROTAN Block H Development – Phase 1A
Client: Technip-FMC
SUBSEA PROJECTS
Email: [email protected] Website: www.awin.com.sg
A & R Head Centraliser
✓ 10” Gas Export Riser – Bend Stiffener Connector
Project:
4047 - Layang Development
Client: Technip-FMC
Stern Chute
✓ 2.5 m Radius ✓ Fabrication & Supply
Client: Aquatic
Pile Sleeve
✓ 3.2 m, 96” Strips in Pile Sleeve ✓ Support for Air Level Transducer ✓ Fabrication and Supply
Client: Menck
Hose Discharge Reel
✓ 9 m Radius ✓ Fabrication & Supply
Project: FPSO OSX3
Engineering – Procurement – Construction
Bend Stiffeners
✓ 10” gas Export Risers ✓ Fabrication & Supply
Project: FPSO OSX3
SUBSEA PROJECTS
Email: [email protected] Website: www.awin.com.sg
Tensioner
✓ Refurbishment, including Fabrication of Roller Cylinder, Grip Cylinder, Supply seal keat
✓ Supply Power pack, Spare Container, Control Cabin
Client: Aquatic
`
CONTACT & WORKS
Registered Office: 3 International Business Park,
#04,03 Nordic European Centre, Singapore
609927
Email: [email protected] Website: www.awin.com.sg
Workshop: No.5 Tuas South Street 6
Open Yard: 101 Tuas South Ave 8