awareness behavior consequences the aim is … lock out tag out in... · code of federal regulation...
TRANSCRIPT
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Brief OutlineCode of Federal Regulation (29) 1910.147
The Control of Hazardous Energy (Lockout/Tagout)
The Control of Hazardous Energy (lockout/tagout) refers to the placement of locks and/or tags on an energy-isolating device(s), in accordance with established procedures, to ensure that the machinery, equipment, or process cannot be energized while anyone is exposed.
This presentation, (lockout/tagout), will focus primarily on 3 platforms:AwarenessBehaviorConsequences
The aim is prevention and compliance.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Title 29 (CFR) Code of Federal RegulationsSubpart *J
General Environmental ControlsPart 1910
Section #147The Control of Hazardous Energy
(Lockout/Tagout)
Chapter XVII Occupational Safety and HealthAdministration – Department of Labor
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
The Control of Hazardous Energy(Lockout/Tagout)
ScopeSpecific Coverage
ApplicationRequirements
PurposeWritten ProgramWritten ProceduresDefinitions / Demonstrations
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Scope
The standard 1910.147 covers the maintenance, servicing/set-up of machines and equipment in which the unexpected energization or start-up or the release of the stored energy could cause injury or death to employees.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Application
The standard 1910.147 applies to the Control of Hazardous Energy during maintenance, servicing/set-up of machines and equipment.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Purpose
The standard 1910.147 requires employers to establish a written program and utilize procedures for affixing appropriate Lockout/Tagout devices to energy isolating devices, and to otherwise disable machines / equipment.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Lockout/Tagout RequirementsOSHA 1910.147 … REQUIRES “EMPLOYERS TO ESTABLISH A PROGRAM AND UTILIZE PROCEDURES FOR AFFIXING APPROPRIATE LOCKOUT DEVICES AND/OR TAGOUT DEVICES TO ENERGY-ISOLATING DEVICES PRIOR TO MAINTENACNE, SERVICEING AND SET-UP AND TO OTHERWISE DISABLE MACHINES OR EQUIPMENT TO PREVENT UNEXPECTED ENERGIZATION, START-UP OR RELEASE OF STORED ENERGY IN ORDER TO PREVENT INJURY AND/OR DEATH TO EMPLOYEES.”
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What does Lockout/Tagout mean?
The placement of a Lockout/Tagout device on an energy isolating device, in accordance with an established procedure, ensuring that the energy isolating device and the equipment being controlled cannot be operated until the Lockout/Tagout device is removed.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What is a Lockout/Tagout device?
A device that utilizes a positive means such as a lock, either key or combination type, to hold an energy isolating device in a safe / off position and prevents the energizing of a machine or equipment.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Lockout/Tagout Device
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What is an Energy Isolating Device?A mechanical device that physically prevents the transmission orrelease of energy, including but not limited to the following:
A manually operated electrical circuit breakerA disconnect switchA manually operated switch by which the conductors of a circuit can be disconnected from all underground supply conductors, and in addition, no pole can be operated independentlyA line valueA blockAnd any similar device used to block (or) isolate energy
NOTE: Push Buttons, Selector Switches, and other control Circuit Type Devices are not Energy Isolating Devices…
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
Energy Isolating Device
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What are Energy Sources?
Any source of electrical, mechanical, hydraulic, pneumatic, thermal fluids and gases, water under pressure, chemical and gravity, or other energy.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What is Maintenance Lockout/Tagout?
Workplace activities such as constructing, installing, modifying, adjusting, inspecting, setting up and maintaining machines and equipment.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What is Servicing Lockout/Tagout?
Workplace activities include unjamming, cleaning, lubrication of machines or equipment, and making adjustments or tool changes, where the employee may be exposed to the unexpected energization or startup of the equipment or release of hazardous energy.
Presented by: Thomas T. Fullove, Green Bay Packaging, Inc, Cincinnati Division
What does Setting-Up Lockout/Tagout Mean?
Any work performed to prepare a machine or equipment to perform its normal production operation.