• On-machine board scanning allows a board image to be created and used for process development.• Enclosure provides operator safety with door sensor/interlocks.

Excellent for Component Removal when Underfill is used!

AVX250Precision Component Milling/Removal

Also great for removing components when heat cycles cannot be applied.

Key Features• Automatic vision align (model based).• Motorized camera zoom and focus.• Direct-view camera for monitoring setup and process activity.• Automatic tool changing and tool length measurement.• Vacuum board clamping makes sure board is securely held in place.• Laser height measurement for board and component.• Ionizer fan eliminates static from the workspace. • On-machine, vacuum-based debris removal.

Air-Vac Engineering Company, Inc.30 Progress Avenue • Seymour, CT 06483 • 203.888.99002131 Las Palmas Drive, Ste D • Carlsbad, CA 92009 • 760.438.9363www.air-vac-eng.com

Component placement completed on AVX500 Platform.Upper Vision Camera System inspects site after millingis complete.

Precision milling of component. Direct-View Camera monitors process activity. Ionizer Fan and Vacuum System (not shown), eliminates static and debris from work area.

Board Imaging Software accurately checks final component location.

Milling of 15mm PBGA with Non-Reworkable Underfill example.