Note:1. ON/VGA BYPASS – Power on mode / VGA bypass mode. VGA bypass mode is power down mode (standby mode). Audio output will be cut off in VGA bypass mode2. OSD menu – On Screen Display menu3. SOURCE – AV/S-video input selection4. MODE – change VGA output resolution5. PIP – Picture in picture mode6. Picmode – Picture mode : Normal/User/Bright/Soft7. VGA ADJUST – adjust PIP screen at PIP mode

Front buttonPanel

4 : 3800 x 600 60Hz800 x 600 75Hz1024 x 768 60Hz1024 x 768 75Hz1280 x 1024 60Hz1280 x 1024 75Hz1600 X 1200 60Hz

16 : 91366 x 768 60Hz1600 x 900 60Hz1920 x 1080 60Hz

16 : 101440 x 900 60Hz1680 x 1050 60Hz1920 x 1200 60Hz

Supported VGA output resolution

BUTTON

MAIN

OSD MENU MODE

PIP MODE

1

ON / VGA BYPASS

2

OSD MENU

Back / Exit OSD

VGA ADJUST

3

SOURCE

UP

4

MODE

DOWN

CHANGE PIPPOSITION

5

PIP

ENTER / LEFT

EXIT PIP MODE

6

Picmode

ENTER / RIGHT

CHANGE PIP SIZE

MODE

Connection

Output

Input

AV/S-video to VGA converter(with audio and VGA bypass)

Audio output(3.5mm audio jack)

VGA output

Front button panel

S-video input

Poweradapter

Audio input(Right channel)

Audio input(Left channel)

AV video input

VGA input

Status lightLight on - AV/S-video modeLight flash - VGA bypass mode

Master power switch

DC Jack (connect to power adapter)

Orion-V2 User manual

Input interface

Output interface

Maximum VGA output resolutionMinimum VGA output resolutionSupport output ratio

Picture adjustment

Support input video standard

OSD menuPIP mode supportSetting store (Save) support

Restore to factory mode (Default) supportWall- mount supportAuto Power onPower supplyProduct DimensionProduct WeightAccessory

1920 x 1200 @60Hz800 x 600 @60Hz4:3, 16:9, 16:10

Brightness, Contrast, Hue, Saturation, Color temperature

NTSC /PAL/SECAM

1) VGA2) AV (CVBS) - RCA connector3) S-video4) audio (RCA x 2 – Left & Right)

1) VGA2) audio (3.5mm audio jack)

YesYesYes

Yes

YesYes5V @ 1A (DC jack)5.2 x 3.54 x 1.28 inches / 132 x 90 x 32 mm 5.1 ounces / 145 gramVGA cablePower adapter

Specification

• The user can change the size and position of AV/s-video screen window in PIP mode• If “Unknown resolution” message appears on screen when the user try to enter PIP mode. It means that the product cannot detect the VGA input resolution. Please change VGA input resolution on Windows and try again.

Power switch1) Master power switch 2) Power on / VGA pypass mode button

At Power on mode: press 3 second to switch to VGA bypass modeAt VGA bypass mode: press 1 second to switch to Power on mode

Note: The product will automatically power on when the power is connected

Press Key 2 to enter OSD menu

OSD menu

PIP mode

Master power on

Master power cut off

Press Key 2 for back or exit OSD menuPress Key 3 for moving upPress Key 4 for moving downPress Key 5 or 6 for enterPress Key 5 for moving leftPress Key 6 for moving right

© 2017 by Pirect International Limited. All rights reserved. Information in this document is subject to change without notice. Pirect International Limited reserves the right to modify, change, improve or enhance its products and to make changes in the content without obligation to notify any person or organization of such changes. Please visit www.pirect.com to get the updates of the operation and use of Pirect products.

Picture shown may vary from actual product.

Pirect International LimitedWebsite www.pirect.comTel +852-26718778Email enquiry@pirect.com