av105
TRANSCRIPT
-
8/12/2019 AV105
1/3
Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email [email protected] www.alphaind.com 1Specifications subject to change without notice. 3/99A
Parameter Condition Frequency Min. Typ. Max. Unit
Switching Characteristics Rise, On (10/90% or 50% CTL to 90% RF) 350 nS
Fall, Off (90/10% RF or 50% CTL to 10% RF) 250 nS
Intermodulation Intercept Point (IIP3)3 For Two-tone Input Power +0 dBm 0.9 GHz 15 dBm
Control Voltage (VC) 0.0 VS V
Supply Voltage (VS) 5.0 V
Control Current (IC) 800 A
Supply Current (IS) 800 A
GaAs IC 35 dB Voltage Variable AttenuatorSingle Positive Control 0.52.5 GHz
Features
Single Positive +5 V Control Voltage
35 dB Attenuation Range @ 0.9 GHz
Excellent Linearity Performance
SOIC-8
AV105-12
0.049
(1.24 mm)0.016
(0.41 mm)
0.016 MAX.
(0.41 mm) x
45 CHAMFER
PIN 1
0.197 (5.00 mm)
0.189 (4.80 mm)
0.068
(1.73 mm) MAX.
0.010 (0.25 mm)0.004 (0.10 mm)
0.010 (0.25 mm)
0.007 (0.17 mm)
0.158 (4.00 mm)0.150 (3.80 mm)
8
MAX.
0.020 (0.51 mm) MAX.
0.244 (6.20 mm)
0.228 (5.80 mm)
0.050 (1.27 mm) BSCPIN 8
PIN 1
INDICATOR
DescriptionThe AV105-12 GaAs IC FET voltage variable attenuatorprovides 35 dB attenuation range at 900 MHz controlled
by a single positive voltage. The VVA has a linear transfercurve of 8 dB/V slope, with input and output VSWR betterthan 1.4:1 over all states. Its attenuation range at 1900
MHz is 31 dB. It operates with supply voltage of +5 V andcontrol voltage of 0 V to +5 V in a low cost SOIC-8
package. The RF ports require 25 pF DC blockingcapacitors.
Parameter1 Frequency Min. Typ. Max. Unit
Insertion Loss (VC = 5 V) 0.51.0 GHz 2.8 3.1 dB
1.02.0 GHz 3.2 3.6 dB
2.02.5 GHz 3.5 3.8 dB
Maximum Attenuation (VC = 0 V)2 0.50.8 GHz 25 33 dB
0.81.0 GHz 35 38 dB
1.01.7 GHz 32 35 dB1.72.0 GHz 28 31 dB
2.02.5 GHz 26 30 dB
VSWR (I/O)3 0.52.5 GHz 1.8:1
Electrical Specifications at 25C (VS = 5 V)
Operating Characteristics at 25C (VS = 5 V)
1. All measurements made in a 50 system, unless otherwise specified.2. Maximum attenuation includes insertion loss.3. For worst case state.
Preliminary
-
8/12/2019 AV105
2/3
GaAs IC 35 dB Voltage Variable Attenuator Single Positive Control 0.52.5 GHz AV105-12
2 Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email [email protected] www.alphaind.comSpecifications subject to change without notice. 3/99A
0
-1
-2
-3
-4
2.52.0
Frequency (GHz)
Insertion Loss vs. Frequency
InsertionLoss(dB)
-50.5 1.0 1.5
4 53
VC(V)
Attenuation vs. Control Voltage
Attenuation(dB)
0 1 2
-40
-35
-30
-25
-20
-15
-10
-5
0
2.52.0
Frequency (GHz)
Maximum Attenuation vs. Frequency
MaximumAttenuatio
n(dB)
0.5 1.0 1.5-45
-40
-35
-30
-25
-20
-15
-10
-5
0
Typical Performance Data @ 0.9 GHz(Unless Otherwi se Specifi ed)
4 53
VC(V)
VSWR vs. Control Voltage
VSWR
0 1 2
1.00
1.10
1.20
1.30
1.40
1.50
Input
Output
40
30
1510
20
4 53
VC(V)
Input IP3 vs. Control Voltage
IIP3(dBm)
00 1 2
35
25
5
4.0 5.03.0
VC(V)
Attenuation vs. Control VoltageOver Temperature
Attenuation(dB)
0 1.0 2.0-3.0
-2.0
-1.0
0
1.0
2.0
3.0Attenuation Normalized to 25C
85C
-20C
-
8/12/2019 AV105
3/3
GaAs IC 35 dB Voltage Variable Attenuator Single Positive Control 0.52.5 GHz AV105-12
Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email [email protected] www.alphaind.com 3Specifications subject to change without notice. 3/99A
1
2
3
4
8
7
6
5
GND
GND
GND
VS
J1
VC
J2
GND
CBL
CBL
Characteristic Value
RF Input Power 50 mW > 500 MHz
Supply Voltage +4 to +8 V
Control Voltage -0.2 V < VC < VS +0.2 V
Operating Temperature -40C to +85C
Storage Temperature -65C to +150C
JC 25C/W
Absolute M aximum Ratings Pin Out
DC blocking capacitors (CBL) supplied externally.CBL = 25 pF for operation >500 MHz.
Note: Exceeding these parameters may cause irreversible damage.