av carts page 1.qxp
DESCRIPTION
4.3 Conference room consoles shall be laminated in oak with black trim or dove gray with black trim. 3.2 Sides, doors and shelves for metal carts shall be constructed of 20 gauge (.035") formed sheet metal. 1.3 All models shall have a system of casters or wheels for easy mobility. 3.3 Conference room consoles shall be constructed of pre-cut 3/4" thick high density core, laminated material. 2.2 Models must be available from a pre-defined set of manufacturers model numbers. 07-07 / cartsTRANSCRIPT
Section: D1 Page:1
1) General Description1.1 Mobile Video Centers, AV Carts, and Conference
Room Consoles. See Appendixes “A” and “B”for typical styles and measurements.
1.2 The contractor shall supply an appropriatemodel which supports the specified sizemonitor and the appropriate amount ofaudiovisual electronics.
1.3 All models shall have a system of casters orwheels for easy mobility.
1.4 All enclosed models shall have doors thatswing out of the way for easy access and comewith a locking system.
1.5 Metal carts shall be constructed of 14 gauge(.074") sheet metal corner posts and 20 gauge(.035") shelves and be capable of assemblywithout special tools with no welding required.
1.6 Metal carts shall have a choice of models withpredesigned shelf heights and configurations.
1.7 Conference room consoles will offer shelves thatadjust on 1-1/4" increments and feature pilotholes for pullout shelves and storage drawers.
1.8 Wooden conference room consoles and cartsshall be constructed of a minimum 3/4" thick MDFcore with low pressure laminate.
2) Pre-Engineered Construction2.1 All models shall consist of easily assembled
components of pre-engineered construction.
2.2 Models must be available from a pre-defined setof manufacturers model numbers.
2.3 Models must be in common production for atleast two years prior to date of submission.
3) Materials3.1 Metal cart frames shall be pre-welded and
constructed of 14 gauge (.074") formedsheet metal posts and secured by supplied1/4-20 bolts.
3.2 Sides, doors and shelves for metal carts shall beconstructed of 20 gauge (.035") formed sheetmetal.
3.3 Conference room consoles shall be constructedof pre-cut 3/4" thick high density core, laminatedmaterial.
4) Finish and Color4.1 Frame steel and sheet metal side panels, doors,
shelves, and tops shall have a zinc oxide washprimer with either dove grey or pearl graybaked enamel finish.
4.2 Economy AV Carts shall include chrome platedsteel frame posts.
4.3 Conference room consoles shall be laminated inoak with black trim or dove gray with blacktrim.
5) Optional Accessories5.1 A full range of optional accessories are available
including, but not limited to:
5.2 Four outlet electrical assembly, rubber mat,monitor safety strap, oak pullout shelf, dovegray pullout shelf, oak storage drawer, dovegray storage drawer, and steel pullout drawer.
6) Instructions6.1 Fully detailed assembly instructions in the
English language shall be supplied with bothwritten and pictorial descriptions for eachitem/model number component.
Model: AUDIOVISUAL CARTS
© January 2001 Winsted Corporation
07-07 / carts
Architect and EngineerSpecifications10901 Hampshire Ave. So., Minneapolis, Minnesota 55438-2385 U.S.A.Telephone: (800) 447-2257 or (952) 944-9050 • FAX: (800) 421-3839 or (952) 944-1546
Winsted Corporation General A&E Specifications
Architect and Engineer Specifications
Section: D1 Winsted Corporation General A&E Specifications Page: 2
Appendix A Typical Mobile Video Center Appendix B Typical Economy AV Cart
Model R3406 Model R3303
34.25
32.0022.00
12.00
13.00
22.0032.00
12.25
12.2534.75
07-07 / carts
7) Packaging7.1 Each component part number shall be
independently marked and packed into double ortriple ply corrugated outer cartons and shall besuitable for storage and shipping to site withoutdamage.
8) Warranty8.1 The manufacturer shall provide a written ten year
guarantee against defects of all component parts,material, and workmanship under normal use.