GeneralTechnologiesCorp.

Automotive Electrical Testing and Measurements Tools

Selection Guide

General Technologies Corp.#121-7350 72nd StreetDelta, BC V4G 1H9

Canada

Tel: 604-952-6699 Fax: 604-952-6690

Toll Free: 800-440-5582 www.gtc.ca

CT8002 Professional Cordless Circuit Tester

CT6100 Fuse Socket Connectors

Main Features • No ground wire means no wire

tangles nor time lost searching for grounding points

• High Impedance Electronic circuitry

• Safety V-groove needle accessory for piercing and storing

• Negligible Current Draw ( 20 micro-amps) is 10,000 times less than regular lamp type testers

• This gives complete safety when working around sensitive electronic control modules and sensors

• Operating Range between 3 and 28 Volt DC in battery powered systems

• Buzzer & LED Indicator gives audible and visual signal when positive voltage is detected, making it ideal for reaching congested places

• Buzzer vibration indicates even when used in noisy out-of-sight locations Professional rugged

• Stainless Steel metal construction is damage resistant

Rugged Solid State electronic voltage detector needs no wire or clip connector to ground. Safe around automotive microcomputers, electronics control modules, sensors, etc.

Specifically designed for use on autos, trucks, trailers, RV’s & boats.

The CT8002 Includes: - Safety V-groove needle accessory - 2 x 1.5V alkaline batteries - Short Instructions

Main Features • Ergonomically molded

connector.

• Easy access connector tabs fit:

- 1⁄4” quick connects

- Alligator clips

- Jumper Leads

- Multimeter test leads

• Plated contacts for maximum conductivity and durability

• Fits all Maxi, ATO and Mini automotive fuse sockets

Access electrical circuit at fuse socket to:

1 Check Voltage

1 Check Short/Open Circuits

1 Check Current Draws

Tap power to energize/check electrical components and accessories:

1 Cooling fans

1 Electric fuel pump

1 Power window motors

1 Power doors

1 Lamps

1 Relays

1 Wiring harnesses

The CT6100 Includes: - 1 Maxi size fuse socket connector- 1 ATO/ATC size fuse socket connector - 1 Mini size fuse socket connector

CM1000 1000 Amps AC/DC Current Clamp Meter

Main Features

• AC/DC current measurement up to 1000 A.

• AC/DC Voltage measurement up to 1000 Volt.

• Resistance measurement up to 100 KOhm

• Continuity check with audible indicator.

• Full autorange features

• Clamp opens up to 1 inch (25.4 mm)

• One rotary switch operation

• Large 4 digit LCD display.

• Relative measurement

• One touch auto zero.

• Peak Hold Function Data

• Hold Function

• 2 readings per second sampling

CM1000 Applications:

1 Measure currents in circuits like battery chargers, alternators, starter motors, electrical loads, etc.

1 Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

1 Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

1 An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

The CM1000 includes :- Two test leads

- Soft carrying case

- 2x1.5V AAA alkaline batteries

- User’s manual

CM600 600 Amps AC/DC Current Clamp Meter

Main Features

• AC/DC current measurement up to 600 A.

• AC/DC Voltage measurement up to 600 Volt.

• Resistance measurement up to 1 KOhm

• Continuity check with audible indicator.

• Full autorange features

• Clamp opens up to 1 inch (25.4 mm)

• One rotary switch operation

• Large 4 digit LCD display.

• Relative measurement

• One touch auto zero.

• Peak Hold Function Data

• Hold Function

• 2 readings per second sampling

CM600 Applications:

1 Measure currents in circuits like battery chargers, alternators, starter motors, electrical loads, etc.

1 Check grounds, Voltage drops and continuity across Connectors, Wires, Cables, Relays Contacts, Lamps, Switches, etc.

1 Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

1 An essential tool for all around troubleshooting of electrical and electronic circuit and systems.

The CM600 includes :- Two test leads

- Soft carrying case

- 2x1.5V AAA alkaline batteries

- User’s manual

CM100 1 mA to 100 A AC/DC Current Clamp Meter

Main Features

• AC/DC current measurement from 1mA up to 100 A.

• Small jaw: 1.2”(W) x 0.53” (D) (300x13.4mm)

• Clamp opens up to 1/2 inch (12.5 mm) .

• AC/DC Voltage measurement up to 600 Volt.

• Resistance measurement up to 10 KOhm

• Continuity check with audible indicator.

• One rotary switch operation

• Large 4 digit LCD display.

• Relative measurement

• One touch auto zero.

• Peak Hold Function Data

• Hold Function

• 2 readings per second sampling

CM100 Applications:

1 Measure small drain and parasistic current draws in circuits, sensors, electronic modules, electrical loads, etc.

1 Check grounds, Voltage drops and continuity across Connectors, Spark Plug Wires, Cables, Relays Contacts, Lamps, Switches, etc.

1 Check components like Alternator, Diodes, Relays Coils, Condensers, Ignition Coils, Spark Plug Wires, Magnetic Pick-ups, Motors, Switches, Fuses, etc.

1 An essential tool for troubleshooting electrical and electronic circuit and systems.

The CM100 includes :- Two test leads

- Soft carrying case

- 2x1.5V AAA alkaline batteries

- User’s manual