AUTOMOTIVE AND LIGHT TRUCK GENERAL SERVICE100% DESIGNED AND BUILT IN NORTH AMERICA

4 POST ALIGNMENT OR SERVICE 19,000 LB. / 8.6T CAPACITYDOUBLE WALL RUNWAYS WITH “Z” RAILS, BUILT IN RADIUS PLATE POCKETS & REAR SLIP PLATE

#TLS419ALCRx1

Jacking beam TLS-RJ9

Stainless Steel Turnplates TLSSTP

Runway Step Platforms TLSMWS

4 POSTTLS419ALCRx1 / TLS419FDCRx1

JUNE 2017

TOTAL AUTOMOTIVE LIFTING SOLUTIONS INC. 2300 SPEERS RD OAKVILLE, ON L6L 2X8 PHONE (877) 799-5438 FAX (905) 891-1214

OPTIONAL ACCESSORIES

224 3/8" OR [197 3/8'']

86"

8 7/

8'' L

OW

ERED

74 R

AIS

ED

150"

301 3/8" OR [274 3/8'']

22"

53" 248 3/8" OR[221 3/8'']

58 1/2" RAMP 237 3/8" OR [210 3/8''] DECK LENGTH (MAX. SERVICE W/B 232 3/8'' OR 205 3/8'')

40"

2

3"

23"

86"

146

"

130

"

76" SLIP PLATE 88 3/8" MIN.4-WHEEL ALIGN.W/B

164 3/8" MAX. 4-WHEEL ALIGN. W/B 56 3/8" OR [29 3/8''] 16 5/8"

MOTOR: 2HP 230V 1PH 60HZAMP DRAW: 14.5A@FULL CAPACITYAIR: 100~120 PSIOPERATING PRESSURE@FULL LOAD: 2750PSI

D

C

B

A

B

C

D

12345678

8 7 6 5 4 3 2 1

E

F

E

F

A

CHECKED

SIZENAMEMATERIAL

UNLESS OTHERWISE SPECIFIED:

REV.

TITLE: 19,000LBS 4 POST LIFT

DATE

GEOMETRIC TOLERANCING PER: ASME Y.14.5M-1994

DIMENSIONS ARE IN [MM] INCHES

TOLERANCES:FRACTIONAL: [1.5] 1/16"ANGLE: MACH 1/2 BEND 1X.X" (1 DECIMAL): [3] 0.1"X.XX" (2 DECIMAL): [1] 0.03"X.XXX" (3 DECIMAL): [0.5] 0.010"

PROJECT: 19K 4 POST

44180000

CDRAWNFINISH S.Z. 2017-05 -29

APPROVED

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF TOTAL AUTOMOTIVE LIFTING SOLUTIONS INC. (TLS).

ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION

OF TLS IS PROHIBITED.

PART# 44180000 ALT. PART#

DO NOT SCALE DRAWING

TOTAL AUTOMOTIVE LIFTINGSOLUTIONS INC.

(905)847-1198 FAX (905)891-1214www.TLSLifts.com

B-01

SCALE: 1:24 SHEET 1 OF 9WEIGHT: 4971.10 lbs

4 POST ALIGNMENT 19,000 LB./ 8.6T CAPACITY

FEATURES

EQUIPMENT FOOTPRINT

ADDITIONAL FEATURES

ALIGNMENT TLS419ALCRx1 / EXTENDED TLS419ALCXx1SERVICE TLS419FDCRx1 / EXTENDED TLS419FDCXx1

WWW.TLSLIFTS.COM OR CALL (877) 799-5438

AT TLS OUR GOAL IS TO BUILD LIFTS THAT LAST LONGER, PERFORM BETTER AND COST LESS TO OPERATE

CONTACT US NOW

SPECIFICATIONSCapacity 19,000 lbs / 8.6T

Overall Length Extended Model 301-3/8" / 7655mm

Overall Length Standard Model 274-3/8" / 6969 mm

Deck Length Extended Model 237-3/8” / 6029mm

Deck Length Standard Model 210-3/8” / 5344mm

Overall Width 150” / 3810mm

Deck Width 23” / 584mm

Lowered Height 8-7/8” / 225mm

Raised Height 74” / 1880mm

Min. 4 Wheel Align. WB 88-3/8” / 2245mm

Max.4 Wheel Align. WB 164-3/8” / 4175mm

Max. 2 Wheel Align. WB 220-3/4” or 193-3/4” /

5607mm or 4921mm

Max. Service WB 232-3/8” or 205-3/8” /

5920mm or 5617mm

Lift Time 70 seconds

Power Requirement 230V - 60Hz - 1 Ph - 20amp

Shipping Weight 5,000 lb. / 2.3T

Part Number TLS419ALCRx1

• Built to higher quality standard; 100% North American made - premium US Bucher 2HP / 1.5kw power unit.

• Corrosion resistant protection - steel components are wheel-a-brator shot blasted and acid washed before a “double bake” powder coat finish is applied.

• Superior structural strength provides longer life and more precise alignments - Non flex double wall 23” / 584mm wide runways with built in “Z” rail. Heavy duty 10” x 8-3/8” x 1/4” wall / 254mm x 213mm x 6mm wall columns and 3” x 8-1/4” / 72mm x 210mm tube traverse beams.

• Greater flexibility with more models to chose from - Available in two runway lengths with built in wheel alignment or service deck. Lift can be ordered in red or blue.

• Premium options and accessories can expand the capabilities and service life - Stainless steel radius plates and rear steer plates, built in tire inflation hoses, removable work steps, LED runway lighting and premium long life 5 year warranty HD jacking beams

• Lower maintenance costs - Zirk style grease fittings at all

1-1/2” / 38mm plated hinge pins. Runway under rear slip plates is open to prevent water and dirt collecting. Thirty 7/8” / 875mm enclosed plated steel slip plate balls provide better support with minimal maintenance.

• Extended Life “Non Twist” Cable design - Machined steel nickel plated 9” / 229mm pulleys with bronze self lubricating bushings. Non spin fatigue resistant 9/16” / 14mm cables are routed on double stacked pulleys (versus four stacked) to reduce stress and wear,

• Low pressure hydraulics provides longer life - 4”ID x 65” / 102mm ID x 1651mm cylinder is mounted under the runway and use a premium “Parker” seal and wear ring with chrome plated plunger shaft.

• Designed for optimum productivity - Single point control with stainless steel cylinder air releases engage 12 locking positions. Adjustable locking ladders 81” x 2-3/4” x 3/8” / 2057mm x 70mm x 9.5mm thick allow for accurate levelling. Power unit can be mounted on a front or rear column. Built in runway compressed air outlets front and rear.

Double wall deck with Z rail

Open runway slots under rear slip plates

Pulley and cables