Repairing of automobile componente / system

System/ component

1. Engine

2. Shock absorbers

3. Tyres

4. Light

5. Break fluid

6. Windscreen

7. Interior

8. Exterior

Engine

• Check oil level once every two week

• Check it after 5000 to 10,000 km

Engine

• Check the oil filter

Engine

• Look for any holes in the muffler or exhaust. Replace the defective.

• Check emission every 6 moths.

Shock absorber

• Check the absorber action by bouncing car up and down. car should stop bouncing when you leave it by on its own

Tyres

• Keep the tyres to its recommended pressure.

• Balance them every 10,000 km.

• Check for cut and wear.

•

Light

• Check the all lights are working properly.

• Cline them if needed.

Break fluid

• Check regularly the level of break fluid monthly.

• In case of Excessive loss check for any leak.

Windscreen

• Keep the washer reservoir full always.

• Inspect wiper blade regularly.

Interior

• Use the vacuum cleaner to keep the interior clean.

Exterior

• Get your vehicle anti rusting coating before the monsoon.

Vehicle test lane

Vehicle test lane

• Main function of this is testing of truck, trailers, buses, cars, and motor cycle.

• Equipment use for this

1.Vehicle identification station

2.Alignment tester

3.Free rollers

4.Speedometer

5.Chassis dynamometer

6. Smoke indicator

7. Emission tester for petrol engine

8. Head light beam tester

9. Diesel smoke tester for diesel engine

• It can handle three or more vehicle at a time and keep the data and result of each vehicle separate.

• pass or fail decision is made by computer only no human influence on it.

• If vehicle pass then fitness certificate can be printed.

Steps of vehicle testing

1. Entry and emission test petrol or diesel

2. Alignment test ,suspension test, roller break test

3. Speedometer test

4. Visual inspection , head beam tester

5. Printing test report