WMB81445L

Automatic Washing Machine

Please read this manual first!Dear Customer,We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results.Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference.

This operation manual will… …help you use your machine in a fast and safe way. •PleasereadtheOperationManualbeforeinstallingandstartingyourmachine. •Particularlyfollowtheinstructionsrelatedtosafety. •KeepthisOperatingManualwithineasyreach.Youmayneeditinthefuture. •Pleasereadalladditionaldocumentssuppliedwiththismachine.PleasenotethatthisOperatingManualmaybeapplicableforseveralothermodels.Differences between models will be identified in the manual.

Explanation of symbolsThroughoutthisOperationManualthefollowingsymbolsareused:

C Important information or useful hints about usage.

A Warning for hazardous situations with regard to life and property.

B Warning for supply voltage.

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Yourappliancealsocontainsagreatamountofrecyclablematerial.Itismarkedwiththis label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.

2820

5215

80/0

5081

0.09

10

3 - EN

TABLE OF CONTENTS1 Your Washing Machine 4

Overview . . . . . . . . . . . . . . . . . . . . . . . . 4Specifications . . . . . . . . . . . . . . . . . . . . 5

2 Warnings 6

General Safety. . . . . . . . . . . . . . . . . . . . 6First Use . . . . . . . . . . . . . . . . . . . . . . . . 6Intended use . . . . . . . . . . . . . . . . . . . . . 6Safety instructions . . . . . . . . . . . . . . . . . 6If there are children in your house... . . . . 7Electrical connection . . . . . . . . . . . . . . . 7

3 Installation 9

Removing packaging reinforcement. . . . 9Openingthetransportationlocks . . . . . . 9Appropriate installation location . . . . . . . 9Adjusting the feet. . . . . . . . . . . . . . . . . . 9Connecting to the water supply. . . . . . 10Connecting to the drain . . . . . . . . . . . . 10Electrical connection . . . . . . . . . . . . . . 11Destroying the packaging material . . . . 11Disposing of the old machine. . . . . . . . 11

4 Initial preparations for washing 12

Sorting the laundry . . . . . . . . . . . . . . . 12Preparingclothesforwashing . . . . . . . 12Correct load capacity . . . . . . . . . . . . . 12Loading door. . . . . . . . . . . . . . . . . . . . 13Detergents and softeners . . . . . . . . . . 13

5 Selecting a Program and Operating Your Machine 15

Control panel . . . . . . . . . . . . . . . . . . . . 15Display symbols. . . . . . . . . . . . . . . . . . 15Turning the machine on . . . . . . . . . . . . 16Programselection . . . . . . . . . . . . . . . . 16Additional programs . . . . . . . . . . . . . . 16Special programs . . . . . . . . . . . . . . . . 17Temperature selection . . . . . . . . . . . . . 17Spin Speed selection. . . . . . . . . . . . . . 18Programandconsumptiontable . . . . . 19Auxiliary functions . . . . . . . . . . . . . . . . 20Time display . . . . . . . . . . . . . . . . . . . . 20

StartingtheProgram . . . . . . . . . . . . . . 21Progressofprogram . . . . . . . . . . . . . . 21Changing the selections after the program has started . . . . . . . . . . . . . . . . . . . . . 22Switching the machine to standby mode 22Child-proof lock . . . . . . . . . . . . . . . . . . 22Ending the program through canceling 22Programinrinseholdmode. . . . . . . . . 22End of program . . . . . . . . . . . . . . . . . . 23

6 Quick instructions for daily use 24

7 Cleaning and care 26

Detergent drawer. . . . . . . . . . . . . . . . . 26The door and the drum . . . . . . . . . . . . 26Outercabinetandcontrolpanel. . . . . . 26Inlet water filters. . . . . . . . . . . . . . . . . . 26Draining any remaining water and cleaning the pump filter . . . . . . . . . . . . . . . . . . . 27

8 Solution suggestions for problems 29

9 Guarantee 35

10 Service 36

4 - EN

1 Your Washing MachineOverview

4

5

6

3

1

2

1 - Detergent Drawer

2 - Door

3 - Top Lid

4-ControlPanel

5 - Filter Cap

6 - Height-adjustable feet

5 - EN

Specifications

Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory in accordance with the relevant standards. Depending on operational and environmental conditions of the appliance, values may vary.

Models

Maximumdrylaundrycapacity(kg)

Height(cm)

Width(cm)

Depth(cm)

NetWeight(±4kg)

Electricity(V/Hz.)

TotalCurrent(A)

TotalPower(W)

Spinningcycle(rpmmax.)

WMB81445L

8

84

60

59

75

230 V / 50Hz

10

2200

1400

6 - EN

2 WarningsPleasereadthefollowinginformation.Otherwise,theremaybetheriskofpersonal injury or material damage. Moreover,anywarrantyandreliabilitycommitment will become void.

General Safety• Neverplaceyourmachineonacarpet

coveredfloor.Otherwise,lackofairflowfrom below your machine may cause electrical parts to overheat. This may cause problems with your washing machine.

• Ifthepowercableormainsplugisdamaged you must call Authorised Service for repair.

• Checkwaterhosesforwear.Donotuseold/used water inlet hoses. These may cause stains on your laundry.

• Fitthedrainhoseintothewastewatersystem securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.

• Yourwashingmachineisdesignedtocontinue operating when the power restores after a power interruption. YoucannotcancelanyProgrammebypressingthe“On/Offbutton.”ThemachinewillresumeitsProgrammewhenthepowerrestores.Pressthe“Start/Pause/Cancel”buttonfor3secondstocanceltheProgramme(See,CancellingaProgramme)

• Theremaybesomewaterinyourmachine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.

• Someproblemsyoumayencountermaybecausedbythesoftware.Press“Start/Pause/Cancel”buttonfor3secondstocanceltheProgrammeset in your machine before calling the Authorised service.

First Use• Toprepareyourmachineforwashing,

carry out your first washing process without loading your machine and withdetergentunder“Cottons90°C”Programme.

• Ensurethatthecoldwaterconnectionshas been made correctly when installing your machine.

• Ifthecurrentfuseorcircuitbreakerisless than 13 Amperes, please have a qualified electrician install a 13 Ampere fuse or circuit breaker.

• Tomakeyourmachinereadyforuse,please be sure that the tap water supply and water drainage systems are appropriate before calling the Authorised service. If they are not, call a qualified plumber to have any necessary arrangements carried out.

Intended use• Thisproducthasbeendesignedfor

home use.• Theappliancemayonlybeusedfor

washing and rinsing of textiles that are marked accordingly.

• Onlydetergents,softenersandsupplements suitable for washing machines may be used.

• Observethecareinstructionslabelledon textile products and any other instructions given by companies that produce detergents for your machine.

• Childrenshouldbesupervisedtoensurethat they do not play with the appliance.

• Thisapplianceisnotintendedforusebypersons(includingchildren)withreduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Safety instructions• Thisappliancemustbeconnectedto

an earthed outlet protected by a fuse of suitable capacity.

• Thesupplyanddraininghosesmust

7 - EN

always be securely fastened and remain in an undamaged state.

• Fitthedraininghosetoawashbasinorwaste system securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures!

• Neveropenthedoororremovethefilterwhile there is still water in the drum. Otherwise,theremaybetheriskofflooding and possible injury due to the hot water.

• Neverforceopenthelockeddoor!Thedoor will be ready to open just a few minutes after the washing cycle comes to an end.

• Unplugthemachinewhenitisnotinuse.

• Neverwashdowntheappliancewithawater hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning.

• Nevertouchtheplugwithwethands.Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged.

• Neverattempttorepairthemachineyourself.Otherwise,youmaybeputtingyours and other’s lives in danger.

• Formalfunctionsthatcannotbesolvedbyinformationintheoperatingmanual:

Turn off the machine, unplug it, turn off the water tap and contact an Authorised service agent.

If there are children in your house...• Electricalappliancesmaybedangerous

forthechildren.Keepchildrenawayfrom the machine when it is operating. Do not let them tamper with the machine.

• Closethedoorwhenyouleavetheareawhere the machine is located.

• Storealldetergentsinasafeplaceoutof reach of the children.

• UseChild/Keylocktopreventchildrenaltering the settings

Electrical connectionMakesurethatyouhaveanearthedpoweroutletsocketratedat13amps(minimum).Attention!If you place your machine under a worktop, the socket must be reachable after installation,oraseparateswitch(whichcandisconnectthetwopoles)mustbeusedinthe installation. Connect the power cord to the appropriate electrical socket with an equivalent current rating indicated on the rating plate at the front of the machine behind the kick plate.After removing the plug from its transit position, please insert the plug seal to prevent water spillage entering the machine.

Electrical requirements Beforeyouinserttheplugintothewallsocket make sure that the voltage and the frequency shown in the rating label corresponds to your electricity supply.We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a Authorised Service Agent.

B This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.Destroy the old plug, which is cut off as a plug with a bare cord could cause a shock hazard if inserted into a socket elsewhere in the house.The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362fuseofthesameratingmustbeused. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the

8 - EN

plug. Fuse covers are available from any good electrical store.

ImportantFitting a different plugAs the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminalsonyourplug,proceedasfollows:1 Connect the green - yellow or green

(earth)wiretotheterminalintheplugmarked ‘E’ or with the symbol f or coloured green and yellow or green.

2 Connecttheblue(neutral)wiretotheterminal in the plug marked ‘N’ or coloured black.

3 Connectthebrown(live)wiretotheterminal in the plug marked ‘L’ or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

9 - EN

3 Installation

Removing packaging reinforcementTilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Opening the transportation locksC Transportation safety bolts must be

removed before operating the washing machine!Otherwise,themachinewillbedamaged!

1. Loosen all the bolts with a spanner until theyrotatefreely(“C”)

2. Remove transportation safety bolts by turning them gently.

3. Fitthecovers(suppliedinthebagwiththeOperationManual)intotheholesontherearpanel.(“P”)

CKeepthetransportationsafetyboltsina safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the appliance without the transportation safety bolts properly fixed in place!

Appropriate installation locationInstall the appliance in environments which have no risk of freezing, in a stable and level position.C The floor must be capable of carrying

the load on it!C If the washing machine and a drier

are placed on top of each other, their approximate weight together may reach 180 kg when they are full.

Important:• Donotplacetheapplianceontopof

the power cable.• Keepatleast1cmdistancefromthe

edges of other furniture.• Placethemachineonafirmsurface;do

not position it on a long pile rug or such like surfaces.

Adjusting the feetC Do not use any tools to loosen the lock

nuts.Otherwise,theycanbedamaged.1. Manually(byhand)loosenthelocknuts

on the feet.2. Adjust them until the machine stands

level and firm.3. Important:Tightenalllocknutsup

again.

10 - EN

Connecting to the water supply.Important:• Thewatersupplypressurerequiredto

runthemachinemustbe1-10bar(0,1–1MPa).(Practically,itisnecessaryto have 10 – 80 liters of water flowing from the tap in one minute to have yourmachinerunsmoothly.)Attachapressure-reducing valve if the water pressure is higher.

• Connectthespecialhosesuppliedwiththe machine to the water intake valves on the machine.

• Inordertopreventwaterleakagethatmay occur at the connection points, therearerubberseals(4sealsforthemodels with double water inlet and 2 sealsforothermodels)attachedtothehoses. These seals should be used at the tap and machine connection ends of the hoses. The plain end of the hose fitted with a filter must be attached to the tap and the elbowed end must be attached to the machine. Tighten the nutsofthehosewellbyhand;neveruse wrenches to tighten the nuts.

• Openthetapscompletelyaftermakingthe hose connection to check if there is any water leakage at the connection points. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use.

• Modelswithasinglewaterinletshouldnot be connected to the hot water tap. Laundry may be damaged or the appliance may switch to protection mode and not work.

When returning the appliance to its place after maintenance or cleaning, care should be taken not to fold, squeeze or block the hoses.

Connecting to the drainThe water discharge hose can be attached to the edge of a washbasin or waste water system. The drain hose should be firmly fitted into the drain as to not loosen in its housing.

Important:• Theendofthedrainhosecanbe

directly connected to the wastewater drain or to the washbasin. The fitting must be secured in all types ofconnections.Yourhousemaybeflooded if the hose falls out of its housing during water discharging.

• Thehoseshouldbeattachedtoaheight of at least 40 cm, and 100 cm at most.

• Incasethehoseiselevatedafterlaying it on the floor level or close to theground(lessthan40cmabovethe

11 - EN

ground),waterdischargebecomesmore difficult and the laundry may come out wet. Therefore, the heights described in the figure should be followed.

• Topreventdirtywaterrefillingthemachine, and to allow for easy discharge, the end of the hose must not be submerged in the drain water. The end of the hose must be able to take in air. The hose should be pushed into the drainage for more than 15 cm. If it is too long you may have it shortened.

• Theendofthehoseshouldnotbebent,it should not be stepped on and it must not be folded between the drain and the machine.

• Thelengthofthehoseistooshort,you may add an extension hose to the original section. The length of the hose must not be longer than 3.2 m after coming out of the machine. To avoid water leakage failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Electrical connection Connect the machine to an earthed outlet protected by a fuse of suitable capacity.Important:• Connectionshouldcomplywithnational

regulations.• Powercordplugmustbewithineasy

reach after installation.• Thevoltageandtheallowedfuse

protection are specified in the section “TechnicalSpecifications”.

• Thespecifiedvoltagemustbeequaltoyour mains voltage.

• Connectionviaextensioncordsormulti-plugs should not be made.

B A damaged power cable must be replaced by a qualified electrician.

B A faulty appliance must not be operated whilst faulty until it has been repaired! There is the risk of electric shock!

Destroying the packaging materialPackagingmaterialcanbedangeroustochildren.Keepthepackagingmaterialsoutof reach of children or dispose them by classifying according to waste directives. Do not dispose of them together with normal domestic waste.Packagingmaterialsofyourmachinearemanufactured from recyclable materials.

Disposing of the old machineDispose of your old appliance in an environmental friendly manner.• Youmayrefertoyourlocalagentor

solid waste collection center in your municipality to learn how to dispose of your machine.

Beforedisposingofyouroldwashingmachine, cut off the mains plug and make the door lock unusable.

12 - EN

4 Initial preparations for washingSorting the laundry• Sortthelaundryaccordingtotypeof

fabric, colour, and degree of soiling and permissible water temperature.

Always follow the advice on the garment labels.

Suitable for drier

Do not drywith drier

Can be ironedwith hot iron

Can be ironed with warm iron

Dry on a hanger

Do not iron

Washing water temperature

Do not use bleach

Bleach can be used

Non machine washable

Hang without spinning

Do notdry-clean

Dry horizontally

Do not wash

Dry-cleanable

Wash with sensitive, short programmes.

Preparing clothes for washingLaundry items with metal attachments such as, bras, belt buckles and metal buttons will damage the machine. Remove metal attachments or place the items in a clothing bag, pillow case, or something similar.

• Emptypocketsandremoveallforeignobjects such as coins, pens and paper

clips. If possible, turn pockets out and brush.

• Placesmallitemslikeinfants’socksandnylon stockings, etc. in a laundry bag, pillow case or something similar. This will also save your laundry from getting lost.

• Placecurtainsinthemachinewithcare.Remove curtain rails and pullers.

• Fastenzippers,sewloosebuttonsandmend rips and tears.

• Wash“machinewashable”or“handwashable”labelledproductsonlywithanappropriateProgramme.

• Donotwashcoloursandwhitestogether. New, dark coloured cottons may release a lot of dye. Wash them separately.

• Toughstainsmustbetreatedproperlybefore washing. If you are not sure, check with a dry cleaner.

• Useonlydyes/colourchangersandlimeremovers suitable for machine wash. Always follow the instructions on the packaging.

• Washtrousersanddelicateclothesturned inside out.

• KeeplaundryitemsmadeofAngorawool in the freezer for a few hours before washing. This will reduce pilling.

Correct load capacity• Themaximumloadcapacitydepends

on the type of laundry, the degree of soilingandthewashingProgrammeyouwish to use.

C The machine adjusts the amount of water according to the amount of laundry placed inside.

CPleasefollowtheinformationinthe"ProgrammeSelectionTable".Washingresults will degrade when the machine is overloaded.

13 - EN

Following weights are given as examples.

Laundry type Weight(gr.)Bathrobe 1200Napkin 100Duvet cover 700BedSheet 500Pillowcase 200Tablecloth 250Towel 200Evening gown 200Underclothing 100Men’soveralls 600Men’sshirt 200Men’spyjamas 500Blouse 100

Loading doorThedoorislockedduringProgrammeoperation. The door can be opened after sometimefollowingtheProgrammeend.• Openthedoor.• Placelaundryitemslooselyinthe

machine.• Pushthedooruntilitclicksintoplace

tightly. Ensure that no items are caught in the door.

Detergents and softenersDetergent drawerThe detergent drawer is composed of three compartments:The detergent dispenser may be in two different types according to the model of your machine.-(I)forprewash-(II)formainwash-(III)siphon–( )forsoftener

Detergent, softener and other cleaning agentsAdd detergent and softener before starting thewashingProgramme.Never open the detergent dispenser drawer whilethewashingProgrammeisrunning!WhenusingaProgrammewithoutpre-wash, no detergent should be put into the pre-washcompartment(Compartmentno.I).AProgrammewithoutpre-washshouldbeselected if a detergent bag or a dispensing ballisgoingtobeused.Youcanplacethedetergent bag or the dispensing ball directly among the laundry in your machine.

Choosing the detergent typeThe type of detergent to be used depends on the type and colour of fabric.• Usedifferentdetergentsforcoloured

and white clothes.• Washwoollenwithaspecialdetergent

specifically for woollens.• Useonlydetergentsmanufactured

specifically for automatic washing machines.

Detergent quantityThe amount of washing detergent to be used depends on the amount of laundry, the degree of soiling and water hardness.

• Donotuseamountsexceedingthequantities recommended on the package to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental protection.

• Usesmallamountsofdetergentatasuitable measure for small amounts of laundry or for only slightly soiled laundry.

• Useexactmeasuresforhighlyconcentrated detergents.

Detergent quantity

for prewashing 1/2 measurefor main washing 1 measure

with hard water an additional 1/2 measure

14 - EN

SoftenerPutthesoftenerintothesoftenercompartment of the detergent dispenser.• Usetheproportionsrecommendedon

the packet.• Neverexceedthe(>max<)level

marking;otherwise,thesoftenerwillbewasted without being used.

• Ifthesoftenerhaslostitsfluidity,dilutedense softener with water before placing it in the detergent drawer.

Liquid detergentWhen using liquid or gel washing detergents,pleasenotethefollowing:• Theliquiddetergentmayleavestains

on your laundry if time delay feature is selected.

• Donotuseliquiddetergentifyouwantto wash using the time delay feature.

• Donotuseliquiddetergentforthemainwash in a cycle with pre-wash.

• Usethedetergentmanufacturer’smeasuring cup and follow the instructions on the package.

Starch• Addliquidstarch,powderstarch

or the fabric dye into the softener compartment as instructed on the package.

• Neverusefabricsoftenerandstarchtogether in the same washing cycle.

• Wipetheinsideofthedrumafterusingstarch.

Eliminating lime formation• Whenrequired,useonlyappropriate

lime removers developed specifically for washing machines and always follow the instructions on the package.

15 - EN

5 Selecting a Program and Operating Your Machine

Control panel

1 - SpinSpeedAdjustmentButton2 - Display3 - TemperatureAdjustmentButton4 - ProgramSelectionKnob

5 - On/OffButton6 - TimeDelayingButton(+/-)7 - AuxiliaryFunctionButtons8 - Start/Pause/CancelButton

Display symbols

F1 F2 F3 F4

a b c d e f

g

hi

jkl

m

a - Spin Symbolb - Spin Speed Indicatorc–Watercut-offsymbol(Accordingto

yourmachine’smodel)d - Economy Symbole - Temperature Indicatorf - Temperature Symbolg - Door Locked Symbolh - Standby Symboli - Start Symbolj - Auxiliary Function Symbolsk - Remaining Time and Delaying Time

Indicatorl -ProgramIndicatorSymbols(pre-wash/

mainwash/rinse/softener/spin)m - Time Delaying Symbol

1

6 7 8

2 3 4 5

16 - EN

Turning the machine onPluginyourmachine.Turnthetaponcompletely. Check if the hoses are connectedtightly.Placethelaundryinthemachine.Adddetergentandsoftener.Pressthe“On/Off”button.Program selectionSelect the appropriate program from the program table according to type, amount and degree of soiling of the laundry and washing temperatures.TurntheProgrammeSelectionKnobtotheprogram mode that you wish to wash your laundry.The recommended temperature and spin speed for the selected program appear. Press“Start/Pause/Cancel”buttontostartthe program.Main programs Depending on the type of textile, the followingmainprogramsareavailable: Each of these main programs comprise of a complete washing process, including washing, rinsing and, if required, spin cycles.A When selecting the program you are

going to use, always consider type of fabric, color, degree of soiling and permissible water temperature.

A Always select the lowest required temperature. Higher temperature means higher power consumption.

C For further program details, see “ProgramSelectionTable”

• CottonsYoucanwashyourdurableclotheswiththisprogram.Yourlaundrywillbewashedwith vigorous washing movements during a longer washing cycle. It is recommended foryourcottonitems(suchasbedsheets,duvet and pillowcase sets, bathrobes, underclothing,etc.).• SyntheticsYoucanwashyourlessdurableclothesonthis program. Gentler washing movements and a shorter washing cycle is used comparedtothe“Cottons”program.Itisrecommended for your synthetic clothes (suchasshirts,blouses,synthetic/cottonblendedgarments,etc.).Forcurtainsandlace,the“Synthetic40”programwithpre-wash and anti-creasing functions selected

is recommended. Detergent should not be put in the pre-wash compartment. Less detergent should be put in the main wash compartmentaslooseknitfabrics(lace)foam too much due to its meshed structure.• WoollensYoucanwashyourmachine-washablewoolen garments on this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. Additional programs For special cases, there are also extra programsavailable:C Additional programs may differ

according to the model of your machine.

• Cottons EcoYoumaywashyourlaundrytobewashedincottonsProgrammeinlongerperiodswhichensure very good washing performance.CCottonseconomyProgramme

consumes less energy compared to othercottonsProgrammes.

• Baby+Toddler ClothingIncreased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people.• DelicatesYoucanwashyourdelicateclothesat this program. It has more sensitive washing movements and does not make intermediate spinning compared to“Synthetic”program.Itmustbeusedfor clothes for which sensitive washing is recommended.• Hand WashYoucanwashyourwoolen/delicateclothesthatbear“notmachine-washable”labelsfor which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes.• Daily QuickThis program is used to wash lightly soiled and unstained cotton garments in a short time.• Xpress Super ShortYoucanusethisprogramtoquicklywashasmall number of lightly soiled and unstained

17 - EN

cottongarments.E.g.:bathrobes,duvetcovers, sport wear, daily clothes and etc. used only once.• A Class 40This programme washes for a longer period at 40°C and gives the same result asthe“Cottons60°C”programme,thusitsaves energy. It is suitable for clothes for whichyoucannotusethe“Cotton60°C”programme.

• ShirtsYoucanusethisprogramtowashtheshirtsmade of cotton, synthetic and synthetic blended fabrics.• Fashion CareYoucanusethisprogramtowashyourlaundry that bear “viscous and viscous blends”labelsorwhichareadvisedtobe washed with delicate programs. It cleans your laundry without causing anydeformationtothem.E.g.:Blouses,dresses, skirts and etc.• SportsThis programme is suitable for clothes that are normally worn for a short time such as sportswear. It is used to quickly wash a small amount of cotton/synthetic blended clothes.

• DuvetYoucanalsowashyourmachine-washablefiber duvets with this program.CYoumustnotloadmorethan1pieceof

fiber duvet for two persons.

Each of these main programs comprise of a complete washing process, including washing, rinsing and, if required, spin cycles.

C Sort the laundry according to type of fabric, color, degree of soiling and permissible water temperature while choosing a program.

C Always select the lowest required temperature. Higher temperature means higher power consumption.

C For further program details, see “ProgramSelectionTable”

Special programsFor specific applications, select any of the followingprograms:• RinseThis program is used when you want to rinse or starch separately.• Spin+DrainThis program spins with maximum possible rpm in the default setting after the water drains from the machine.C Use a lower spin speed for delicate

laundries.Temperature selectionWhenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator .To change the temperature, press the temperature button. Temperature decreases in 10° increments.Coldselectionisshownwith“-”symbol.

Whenthe“Temperature”buttonispressedafter Cold is selected, the maximum temperature of the program you have selected will be displayed.To decrease the temperature, press the “Temperature”buttonagain.

90˚C Normally soiled, white cottons and linens.(Ex.:coffeetablecovers,tablecloths,towels,bedsheets)

60˚C

Normally soiled, fade proof colored linens, cottons or synthetic clothes (Ex.:shirts,nightgowns,pajamas)and lightly soiled white linen clothes (Ex.:underwear)

40˚C30˚C Cold

Blendedclothesincludingsyntheticsand woolens as well as delicates.

18 - EN

Economy SymbolShows energy saving programs and temperature selections.As“Intensive”and“Hygiene”programsarelong programs with higher temperature selectionstoensurehygiene,“Economy”Symbol will not light up.

Spin Speed selectionWhenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.To decrease the spin speed, press the “Spin”button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.Rinse hold is shown with “ ”andnospinis shown with “ ”symbols.

F2 F4F1 F3

If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes become wrinkled when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinseholdfunction:- Adjust the spin speed.- Press“Start/Pause/Cancel”button.

Programresumes.Yourmachinedrainsthe water and spins your laundry.

Youcanusenospinfunctioninordertodrain the water without spinning at the end of the program.

19 - EN

Program and consumption table

•:Selectable*:Automaticallyselected,notcancellable.**:EnergyLabelprogramme(EN60456)*** If maximum spin speed of your machine is lower, selection may be made until maximum spin speed.-:Seeprogramdescriptionformaximumload.

C The auxiliary functions in the table vary according to the model of your machine.C Water and power consumption and program duration differ from the table subject to

changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions, and changes in supply voltage.

CProgramdurationwillbedisplayedonthescreenofyourmachineaccordingtoyourselection.

EN 2 Auxiliary functions

Programme

Max.L

oad(kg)

WaterCon

sumption(l)

Ene

rgy

Con

sum

ptio

n (kWh)

Spinsp

eed(rp

m)

Prewash

Qui

ck W

ash

Ext

ra R

inse

Ant

i- C

reas

e

Pluswater

Rin

se H

old

Selectable temperature range °C

Cottons 90 8 70 2.60 max. • • • • • • 90-Cold

Cottons 60 8 70 1.75 max. • • • • • • 90-Cold

Cottons 40 8 70 0.90 max. • • • • • • 90-Cold

Duvet 40 - 55 0.75 800 • 60-40

Baby&ToddlerClothing 90 8 93 2.70 max. • * • 90-40

A Class 40 40 8 76 1.28 max. • 40

Xpress Super Short 30 2 42 0.10 *** • • 30-Cold

Daily Quick 90 8 65 2.22 *** • • 90-Cold

Daily Quick 60 8 65 1.05 *** • • 90-Cold

Daily Quick 30 8 65 0.28 *** • • 90-Cold

Fashion Care 40 3 36 0.43 600 • • 40

Cottons Eco 60** 8 54 0.76 max. • • • • • • 60-40

Cottons Eco 40 8 54 0.53 max. • • • • • • 60-40

Synthetics 60 4 56 0.90 800 • • • • • • 60-Cold

Synthetics 40 4 56 0.50 800 • • • • • • 60-Cold

Sports 40 4 66 0.58 800 • • • • • • 40-Cold

Shirts 60 4 55 1.15 600 • • • * • 60-Cold

Delicates 40 3 54 0.44 600 • • • • 40-Cold

Woollens 40 2 45 0.31 600 • • • 40-Cold

Hand Wash 30 1.5 33 0.19 600 30-Cold

20 - EN

Auxiliary functionsAuxiliary Function Selection Buttons

a b c d• Dependingontheprogram,youcan

select the desired auxiliary function by pressing the buttons a, b, c,d.

• Selecttherequiredauxiliaryfunctionsbefore starting the program.

• Somecombinationscannotbeselectedtogether.Ex.:Pre-washandQuickWash.

• Symboloftheselectedauxiliaryfunctionwill light up.

Auxiliary function selectionIf an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.Ex.:Ifyouwanttoselectpre-washfirstandthen quick wash, pre-wash will be cancelled and quick wash will remain active.Auxiliary function that is not compatible withtheprogramcannotbeselected.(see,“ProgramSelectionTable”)• PrewashWhenyouselectthisfunction(a),thedisplaywillindicate“F1”symbol.• Apre-washisonlyworthwhilefor

heavily soiled laundry. Without pre-wash you save energy, water, detergent and time.

• Pre-washwithoutdetergentisrecommended for lace and curtains.

• Quick WashWiththisfunction(b),thewashtimeisshortened.“F2”symbollightsuponthedisplay.• Usethisfunctionforsmalleramountsor

slightly soiled laundries.• Extra RinseWhenthisfunction(c)isselected,washingand rinsing is performed with plenty of water.“F3”symbollightsuponthedisplay.• Anti- CreaseWiththisfunction(d),drummovementwill be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water level.“F4”symbollightsuponthedisplay.• Usethisfunctionfordelicatelaundries

that crease easily.C Whenever you select this auxiliary

function, load your machine with half of the maximum laundry specified in the program table.

• Rinse HoldIf you are not going to unload your clothes immediately after the program completes, you may use rinse hold function and keep your laundry in the final rinsing water in order to prevent them become wrinkled when thereisnowaterinthemachine.Press“Start/Pause”buttonafterthisprocessifyouwant to drain the water without spinning. Programresumes.Yourmachinedrainsthewater and program completes.If you want to spin your laundry that you left inwater:- Adjust the spin speed.-PressStart/PausebuttonProgramresumes.Yourmachinedrainsthe water, spins the laundry and program completes.Time displayThe display shows the time remaining for the program to complete while a program is running. Time is displayed in hours and minutes as “01:30”.

Time delayWiththe“Timedelay”functionyoucandelay the program start up to 24 hours. Setting can be made in intervals of 30

21 - EN

minutes.1. Opentheloadingdoor,placethe

laundry inside and fill detergent drawer.2. Set the washing program, temperature,

spin speed and, if required, select the auxiliary functions.

3. Press“Timedelaying”buttons“+”and“-”tosetyourdesiredtimedelay.TheTime delaying symbol will flash.

4. Press“Start/Pause/Cancel”button.Then the time delay starts to count down. The Time delaying symbol will light up. The Start symbol will light up.

The“:”inthemiddleofthedisplayedtime delay will start to flash.

• Morelaundrymaybeloadedortakenout during the time delay period. At the end of the time delay countdown process, time delaying symbol fades and the washing starts as the program duration is displayed.

Changing the delay timeIf you want to change the time during the countdown:1. Press“Start/Pause/Cancel”button.“

:“inthemiddleofthescreenwillstopflashing. The Standby symbol will light up. The Time delaying symbol will flash. The Start Symbol will fade.

2. Press“Timedelaying”buttons“+”or“-”to set your desired time delay.

3. Press“Start/Pause/Cancel”button.TheTime delaying symbol will light up. The Standby symbol will fade. The Start symbol will light up.

4. The“:”inthemiddleofthedisplayedtime delay will start to flash.

Canceling the time delayIf you want to cancel the time delay countdown and start the program immediately:1. Press“Start/Pause/Cancel”button.The

“:”inthemiddleofthedisplayedtimedelay will stop flashing.

2. Start symbol will fade. The standby symbol and the time delaying symbol will flash.

3. Presstimedelayingbutton“-”todecrease the desired time delay. Programdurationafter30minutesshall

be displayed.4. PressStart/Pause/CancelButtonto

start the program.

Starting the Program1. PressStart/Pause/Cancelbuttonto

start the program.2. The start symbol which indicates that

the program has started will light up.3. The door locks and the door locked

symbol will light up.4. The Symbol of the relevant step

(prewash,mainwash,rinse,softenerandspin)thattheprogramhasstartedfrom will light up.

Progress of programThe progress of a running program is shown through a number of symbols on the screen.• At the beginning of each program step,

the relevant symbol in the series of symbols will light up and thus, at the end of the program, all symbols will remain lit up. The symbol that lights up at the far right of the series of symbols indicates the step that is being carried out.

Pre-washWhen“prewash”auxiliaryfunctionisselected, prewash symbol will light up to indicate the beginning of prewash step.Main washMainwashsymbolwilllightuptoindicatethat the main wash cycle has started.RinseRinse symbol lights up at the beginning of the rinse step.Softener Softener symbol lights up at the beginning of softener step. SpinSpin symbol will light up at the beginning ofthefinalspin,during“Spin”and“Pump”special programs.• If the machine is not spinning, the

program may be in rinse hold mode or the automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the machine.

22 - EN

Changing the selections after the program has startedThe selected spin speed and program temperature fade out. An empty frame appears.Whenthe“Programselection”buttonisbrought to the appropriate position, rpm and temperature data reappear.

Switching the machine to standby modeThe machine is switched to standby modebypressing“Start/Pause/Cancel”button momentarily. The Standby symbol which indicates the machine is in standby mode lights up and the start symbol that shows the program has started and is still continuing fades out.

F2 F4F1 F3

Selecting or canceling an auxiliary function in pause modeAuxiliary functions can be cancelled or selected in accordance with the step the program is at.

Adding/removing laundry in pause modeThe door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable for opening. This symbol will fade out as soon as the door is allowed to open. Laundry may be added / taken out by opening the door.

Door lockThe Door Locked Symbol lights up when the loading door is locked. This symbol will flash until the door is allowed to open. Do not force the door at this stage. This symbol will fade out as soon as the door is allowed toopen.Youmayopenthedoorafterthesymbol fades out.

Child-proof lockProtecttheappliancefrombeingtamperedby children by means of the child-proof lock.

In this case, no change can be made in the running program.CYourmachinecanbeturnedonand

offwithOn/Offbuttonwhilethechild-proof lock is activated. In this case, your machine will resume its program with child-proof lock activated.

The machine is switched to child-lock by pressing the 2nd and 4th auxiliary functions for3sec.“C:on”(Child-prooflockisactivated)labelappearsonthedisplay.

The same symbol will also be displayed whenever any button is pressed while the machine is child-locked.To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec.“C:OFF”(Child-prooflockisdeactivated)label appears on the screen.

Ending the program through canceling“Start/Pause/Cancel”buttonispressedfor 3 seconds to cancel the program. Start symbol will flash during cancellation. After cancellation, the symbol of the corresponding step at which the cancellation was made will remain lit and “End”willappearonthescreen.

Program in rinse hold mode• This process is shown with the flashing

Spin Symbol and the lit up Standby Symbol.

If you wish to spin when the machine is in thismode:

23 - EN

Adjustthespinspeed.Press“Start/Pause/Cancel”button.Theprogramcontinues,pumps out the water and spins. The Standby Symbol fades out and Start Symbol lights up.If you want to discharge the water only withoutspinning:Press“Start/Pause/Cancel”button.TheStandby symbol will fade. The Start symbol will light up. The program continues and only drains the water.

End of programWhen the program is finished, the symbols of the relevant steps will remain lit up and the auxiliary function, spin and temperature data selected at the start-up of the program willremainselected.“End”willappearonthe display.

24 - EN

6 Quick instructions for daily usePreparation1. Turn the tap on completely. Check that

the hose is connected tightly.2. Placethelaundryinthemachine.3. Add detergent and softener.

Starting1. Pressthe“On/Off”button.2. Select the programme and the

temperature.3. Ifdesired(accordingtoyourmachine’s

model):– select any auxiliary function,– adjust the spin speed,– set the time delay,4. Close the loading door.5. Press“Start/Pause/Cancel”button.The display shows the time remaining for the programme to complete if time delay is not set.The display shows the time remaining for the programme to start if the time delay is set.6. Check if the Door Locked Symbol lights

up on the screen.TheDoorLockedSymbol(Figure3-13i)willlight up if time delay is not set.TheDoorLockedSymbol(Figure3-13i)willfade if time delay is set.

Cancelling a programme1. Pressandholdthe“Start/Pause/

Cancel”buttonforabout3seconds;theStart symbol will start flashing.

2. The machine can discharge all the water or can take in water for 3 times at most to cool down the clothes and complete discharging process.

Adding more laundry• This is only possible under the following

conditions:– during time delay,CYoumayaddorremovelaundryduring

thetimedelay(untiltheprogrammestarts).Atthebeginningofawashingcycle(machineallowsaddingmorelaundry during a future step only if the water level is low enough to open the

loading door or if the temperature in the machineislow).

In order to add laundry after the start-up oftheprogramme:

1. Press“Start/Pause/Cancel”button.2. Opentheloadingdoorandputinmore

laundry.3. Close the loading door.4. Press“Start/Pause/Cancel”button.

Programme is in rinse hold modeC This process is shown with the flashing

spin symbol and the standby symbol which is lit up.

If you wish to spin when the machine is in thismode:1. Adjust the spin speed.2. Press“Start/Pause/Cancel”button.The

programme continues, pumps out the water and spins.

3. The standby symbol fades out and the start symbol lights up.

If you want to discharge the water without spinning:1. Press“Start/Pause/Cancel”button.2. The standby symbol fades out and the

start symbol lights up.3. The programme continues and only

pumps out the water.

Re-spinning the laundryThe control system for an unbalanced load can pause the spinning in cases when the distribution of the laundry in the drum is not balanced.Ifyouwanttore-spintheclothes:1. Distribute the laundry in your machine

for a balanced load.2. Select the spin programme.3. Adjust the spin speed.

After the programme is finishedProgrammeindicatorsymbolsonthescreen will remain lit after the programme is finished.“End”willappearonthescreen.1. Opentheloadingdoorandtakeoutthe

laundry when the door locked symbol on the display fades out.

2. Pressthe“On/Off”button.

25 - EN

3. Turn the water tap off.4. Remove any folds in the rubber seal on

the loading door and check for debris.5. Leave the loading door and detergent

drawer open to dry.

26 - EN

7 Cleaning and careDetergent drawerRemove any powder residue buildup in the drawer.Todothis;1. Pressthedottedpointonthesiphon

in the softener compartment and pull towards you until the compartment is removed from the machine.

C If more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned.

2. Wash the dispenser drawer and the siphon with plenty of lukewarm water in a washbasin. Wear protective gloves or use an appropriate brush to avoid touching the residues in the drawer when cleaning.

3. Replace the drawer into its housing after cleaning. Check if the siphon is in its original location.

The door and the drumAftereachwash:• Checkifthereareanyforeign

substances in the drum.• Opentheholeinthebellowwiththeaid

of a toothpick if it is clogged.

C Foreign metal substances in your machine can cause rust stains. In such cases:

Clean the drum with a stainless steel

cleaning agent. Never use steel wool or wire wool.

Outer cabinet and control panelWhennecessary:• Wipetheexteriorpanelsofyour

machine with soapy water or mild detergent. Dry it with a soft cloth.

• Useonlyasoftanddampclothtocleanthe control panel.

C Never use a sponge or scrubbing material. These will damage the painted and plastic parts.

Inlet water filtersThere is a filter at the end of each water intake valve at the back side of the machine and also at the end of each water intake hose where they are connected to the tap. These filters prevent the foreign substances and dirt in the water to enter into the machine. Filters should be cleaned as they get dirty.

• Closethetaps.• Removethenutsofthewaterintake

hoses to clean the surfaces of the filters on the water intake valves with an appropriate brush.

• Ifthefiltersareverydirty,youcanpullthem out by means of pliers and clean them.

• Takeoutthefiltersontheflatendsofthe water intake hoses together with the gaskets and clean thoroughly under streaming water.

• Replacethegasketsandfilterscarefully

27 - EN

and tighten the hose nuts by hand.

Draining any remaining water and cleaning the pump filterFilter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump propeller during discharging of the washing water. Thus, a good water discharge is achieved and the pump life is extended.• Ifyourmachinefailstodrainthewater,

thepumpfiltermaybeclogged.Youmay have to clean it every 2 years or whenever it is blocked plugged. Water must be drained off to clean the pump filter.

In addition, water may have to be drained offcompletelyinthefollowingcases:

• beforetransportingthemachine(e.g.whenmovinghouse)

• whenthereisthedangeroffrostIn order to clean the dirty filter and dischargethewater;1- Disconnect or unplug the machine from

the power supply.A There may be water at 90°C in the

machine. Therefore, the filter must be cleaned only after the inside water is cooled down to avoid hazard of scalding.

2-Openthefiltercap.Thefiltercapmaybecomposed of one or two pieces according to the model of your machine.If it is composed of two pieces, press the tab on the filter cap downwards and pull the piece out towards yourself.

If it is composed of one piece, hold it from both sides and open it by pulling out.CYoucanremovethefiltercover

by slightly pushing the kick plate downwards with a screwdriver, through the gap above the filter cover.

3- An emergency drain hose is supplied withsomeofourmodels.Othersarenotsupplied with this item.

If your product is supplied with an emergency drain hose, do the following as showninthefigurebelow:

• Pulloutthepumpoutlethosefromitshousing.

• Placealargecontainerattheendofthe hose. Drain the water off into the container by pulling out the plug at the end of the hose. If the amount of water to be drained off is greater than the volume of the container, replace the plug, pour the water out, then resume the draining process.

• Afterdrainingprocessiscompleted,replace the plug into the end of the hose and fit the hose back into its place.

If your product is not supplied with an emergency drain hose, do the following as showninthefigurebelow:

• Placealargecontainerinfrontofthe

28 - EN

filter to receive water flowing from the filter.

• Loosenpumpfilter(anticlockwise)untilwater starts to flow out of it. Direct the flowing water into the container you haveplacedinfrontofthefilter.Youcan use a piece of cloth to absorb any spilled water.

• Whenthereisnowaterleft,turnthepump filter until it is completely loose and remove it.

• Cleananyresiduesinsidethefilteras well as fibers, if any, around the propeller region.

• Ifyourproducthasawaterjetfeature,be sure to fit the filter into its housing in the pump. Never force the filter while replacing it into its housing. Fit the filter fullyintoitshousing;otherwise,watermay leak from the filter cap.

4- Close the filter cap.Close the two-piece filter cap of your product by pushing the tab on it.

Close the one-piece filter cap of your product by fitting the tabs on the bottom into their positions and pushing the upper part of it.

29 - EN

8 Solution suggestions for problemsCause Explanation / SuggestionProgrammecannotbestartedorselected.Machinemayhaveswitchedtoselfprotection mode due to an infrastructure problem(suchaslinevoltage,waterpressure,etc.).

BringyourmachinetofactorysettingsbyturningtheProgrammeselectionknob.(see,EndingtheProgrammethroughCancelling)

Water in the machine.There may be some water in your machine when you receive it. This is from the quality control process and is normal.

It is not harmful to your machine.

There is water coming from the bottom of the machine.

There might be problems with hoses or the pump filter.

-Makesurethatthesealsofthewaterinlethosesare securely fitted.- Tightly attach the drain hose to the tap.-Makesurethatthepumpfilteriscompletelyclosed.

Machinedoesnotfillwithwater- Tap may be turned off.- Water inlet hose might be bent.- Water inlet filter might be clogged.- The loading door may be ajar.

-Opentheinletwatertapsfully.- Flatten the water intake hose.- Clean the water intake filter.- Close the loading door.

Machinedoesnotdischargewater.- Water outlet hose might be clogged or twisted.-Pumpfiltermaybeclogged.

- Clean or flatten the hose.- Clean the pump filter.

Machinevibratesorshakes.-Machinefeetmightnotbeadjusted.- Transportation safety bolts might have not been removed.- There may be a small amount of laundry in the machine.- The machine may be overloaded or the clothes may be distributed unevenly.- There machine might be touching a solid surface.

- Adjust the machine feet.- Remove the transportation safety bolts.- Add more laundry to the machine.- Reduce the amount of laundry in the machine or balance the load by hand.- Ensure that nothing touches the machine.

MachinestopsshortlyaftertheProgrammestarts.Machinecanstoptemporarilyduetolowvoltage.

It will resume operating when the voltage is back to the normal level.

The water being taken in is directly discharged.

Improper position of the drain hose. Connect the water draining hose as described in the operation manual.

No water can be seen in the machine during washing.This is not a problem. The water level is not visible from the outside of the machine.

30 - EN

The door is jammed.- Water level might be above the lower level of the door.-Machinemightbeheatingupthewaterorit may be at the spinning cycle.- Due to an electrical mechanism, the door can only be opened a few minutes after the Programmehasstopped.

-Runeitherthe“Pump”or“Spin”Programme.- Wait until the process is over.- Wait until the process is over.

Machinefillswithwaterwhenaprocessiscancelled.

Inside of machine may be hot. For safety reasons cold water is added to cool the hot wash load

Itcontinuouslyspins.Remainingtimedoesnotcountdown.(Onmodelswithdisplay)

There may be an imbalance of laundry in the machine.

- The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.- The laundry in the drum may be clustered (bundledlaundryinabag).Laundryshouldberearranged and re-spun.- No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.

Washing time takes longer than the time specified in the manual

- Water pressure may be low.- Supply voltage may be low.- Input temperature of water may be low.- There may be an imbalance of laundry in the machine.- Number of rinses and/or amount of rinse water might have increased.

- The machine will wait until there is sufficient amount of water, which will lengthen the washing time to avoid poor washing results due to insufficient water.- Washing time is extended to avoid poor washing results when the supply voltage is low.- Cycle time is extended to heat up the water when the input water is cold. Also, washing time can be lengthened to avoid poor washing results.- The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.- The laundry in the drum may be clustered (bundledlaundryinabag).- Laundry should be rearranged and re-spun.- No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.- Water amount is increased to obtain a better rinse and a rinse cycle is added when necessary.

31 - EN

It continuously washes. Remaining time does not count down.

In the case of a paused countdown while takinginwater:- Timer will not countdown until the machine isfilledwiththecorrectamountofwater.(Onmodelswithdisplay)- Time might have gotten stuck during heatingstep.(Onmodelswithdisplay)

In the case of a paused countdown at the spinningstep:There may be an imbalance of laundry in the machine.(Onmodelswithdisplay)

- The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Then the timer will start to count down.- Time will not count down until the selected temperaturefortheProgrammeisattained.- The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.- The laundry in the drum may be clustered (bundledlaundryinabag).Laundryshouldberearranged and re-spun.- No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.

It did not spin.

- There may be an imbalance of laundry in themachine.Therefore,theProgrammemight have been completed without spinning.- The machine will not spin if the water has not completely drained.

- The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum.- The laundry in the drum may be clustered (bundledlaundryinabag).Laundryshouldberearranged and re-spun.- No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment. - Check the filter. - Check the drain hose.

Washingperformanceispoor:Laundryturnsgrey

- Using insufficient amount of detergent for a long time, - Washing at low temperatures for a long time, - Using insufficient amount of detergent for hardwaters(soilcansticktothelaundry), - Using excessive amount of detergent (detergentcansticktothelaundry).

- Use the recommended amount of detergent appropriate for water hardness and the laundry. - Select the proper temperature for the laundry to be washed. - If the water hardness is high, using an insufficient amount of detergent can cause laundry to turn grey over time. - It is difficult to eliminate such greyness once it occurs.

Washingperformanceispoor:Staincouldnotberemoved,notcleaned.Laundrycouldnotbewhitened.

- Insufficient amount of detergent used.- Excessive laundry loaded into machine-WrongProgrammeandtemperaturemighthave been selected.- Improper detergent may have been used.- Wrong type of detergent used.

- Use recommended amount of detergent appropriate for the laundry.- Do not load the machine in excess.-SelecttheproperProgrammeandtemperaturefor the laundry to be washed.-Putthedetergentinthecorrectcompartment.- Do not mix detergent with bleaching agents.

32 - EN

-Washingperformanceispoor:Oilystainsappearonlaundry.-Washingperformanceispoor:Badodour

-Oilyaccumulationsonthedrummayhavestuck to the laundry.-Oilyaccumulationsonthedrummayhavestuck to the laundry.

- Such odours and bacteria layers are formed on the drum as a result of continuous washing at lowertemperaturesand/orinshortProgrammes.- Leave the detergent dispenser drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot be created inside the machine.-Machinemustbeoperatedemptyeitherat60°Cor90°CProgrammewithdetergentevery6months.

Colour of the clothes faded.

- Excessive laundry loaded into machine.- Detergent may have gotten damp.- A higher temperature might have been selected.

- Do not load the machine in excess- Store detergent in a closed and dry location.- Do not keep them under high temperatures.-SelecttheproperProgrammeandtemperatureaccording to the type and soiling degree of the laundry.

It does not rinse well.

- The amount, brand and storage conditions of the detergent used might not be appropriate.- Detergent might have been put in the wrong compartment.-Machinefiltermaybeclogged.- Drain hose may be folded.- Intermediate spins may be skipped.

- Store detergent in a closed and dry location. Do not keep them under high temperatures.- If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step.- Check the filter.- Check the drain hose.- There may be an imbalance of laundry in the machine.- The laundry in the drum may be clustered (bundledlaundryinabag).Laundryshouldberearranged and re-spun.- No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment.

Clothes stiffened.

- Insufficient amount of detergent used.- The detergent may have been placed into thewrongcompartment;thedetergentmaybe mixed with the softener.

- If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.- If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step.- Do not mix the softener with detergent when putting in the compartment.- Wash and clean the drawer with hot water.

33 - EN

Clothes do not smell like the softener.

- Insufficient amount of detergent used.- The detergent was placed into the wrong compartment;thedetergentwasmixedwiththe softener.

- If the water hardness is higher, using insufficient amount of detergent can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.- If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step.Do not mix the softener with detergent when putting in the compartment.Wash and clean the drawer with hot water.

Detergent residue in the dispensing drawer.

- Detergent may have been put in wet dispenser drawer.- Detergent may have gotten damp.- Water pressure might be low- The detergent in the main wash compartment might have gotten wet while taking in the prewash water..- Detergent might be mixed with the bleaching agent.

- Dry the detergent drawer before putting in detergent.- Store detergent in a closed and dry location.- Do not keep them under high temperatures.-Thedetergentdispenseroutlet(holes)mayhavea problem. - There might be problems with the detergent dispenser valves.- Do not mix the softener with detergent when putting in the compartment.

There is detergent left on the laundry.- Excessive laundry loaded into machine.-WrongProgrammeandtemperaturemighthave been selected.- Wrong detergent may have been used.

- Do not load the machine in excess.-SelecttheproperProgrammeandtemperaturefor the laundry to be washed.- Use wool detergents for woollens.

There is too much foam

.-Youmaynotbeusingproperdetergentforautomatic washing machines.- Excessive amount of detergent may have been used.- Too much detergent may have been used for a small amount of lightly soiled laundry.- Detergent may have been stored improperly.-Typeofmaterialbeingwashed(laceitemswill cause excessive foam due to their meshedstructure).- Detergent might have been put in the wrong compartment.- Softener being released early.

- Use only automatic washing machine detergents in your washing machine.- Use only sufficient amount of detergent.- Use only sufficient amount of detergent.- Store detergent in a closed and dry location.- Do not store in excessively hot places.- Use smaller amounts of detergent for lace items.- If you put detergent in the prewash compartment although you have not selected a prewash cycle, the machine can take this detergent during rinsing or softener step.- Too much softener was put in. The detergent dispenser is problematic. Water issiphoned(pullingthesoftenerintothewasherearly)duringthefillorrinsecycles. Valves are problematic.

There is foaming over the detergent drawer

Too much detergent was usedMix1tablespoonfulsoftenerand½literwaterand pour into the main wash compartment of the detergent drawer.

34 - EN

Machinedoeswork.Nothingisdisplayedonthescreen.The plug might not be plugged in the mains outlet.Fuse may have blown.Electricity may be cut off.The“On/Off”buttonmighthavenotbeenpressed.

Check the plug.Check the fuse.Check the supply power.Pressthisbutton.

Themachinedidnotstartaftertheprogramwasselectedandthe«Start/Pause/Cancel»buttonwaspressed.

The front door may be ajar.

TheRinseSymbolamongsttheProgramIndicatorSymbolsisflashing.(Subjecttothemodelofyourmachine,watercut-offsymbolmaylightuptoo)

Water may have been cut off.Youcanrestartyourmachinebypressingthe«Start/Pause/Cancel»buttonforashorttimeafterensuringthat the water is not cut off.

35 - EN

9 Guarantee

YournewBekoproductisguaranteedagainst the cost of breakdown repairs for twelve months from the date of the original purchase.

What is covered?• Repairsnecessaryasaresultoffaulty

materials, defective components or manufacturing defect.

• Thecostoffunctionalreplacementparts, but excluding consumable items.

• ThelabourcostsofaBekoapprovedrepairer to carry out the repair.

What is not covered?• Transit,deliveryoraccidentaldamage

or misuse and abuse.• Cabinetorappearanceparts,including

knobs, flaps, handles or container lids.• Accessoriesorconsumableitems

including but not limited to, ice trays, scrapers, cutlery baskets, filters and light bulbs.

• Repairsrequiredasaresultofunauthorised repair or inexpert installation that fails to meet the requirements contained in the user instruction book.

• Repairstoproductsusedoncommercial or non-residential household premises.

• Lossoffrozenfoodinfreezersorfridge/freezers.(Foodlossinsuranceisoftenincluded within your household contents insurance policy, or may be available separatelyfromyourretailer).

Important notes.• YourBekoproductisdesignedandbuilt

for domestic household use only. • Theguaranteewillbevoidiftheproduct

is installed or used in commercial or non-residential domestic household premises.

• Theproductmustbecorrectlyinstalled,located and operated in accordance with the instructions contained in the UserInstructionsBookletprovided.

• ProfessionalinstallationbyaqualifiedElectrical Domestic Appliance Installer

is recommended for all Washing Machines,DishwashersandElectricCookers

• GasCookersmustonlybeinstalledbyaCORGI(orBORDGAIS)registeredGas Installer.

• TheguaranteeisgivenonlywithintheboundariesoftheUnitedKingdomandthe Republic of Ireland.

• Theguaranteeisapplicableonlytonewproducts and is not transferable if the product is resold.

• Bekodisclaimsanyliabilityforincidentalor consequential damages.

• Theguaranteedoesnotinanywaydiminish your statutory or legal rights.

Should you experience any difficulty in obtainingservicepleasecontacttheBekoCustomer Help-Line. Tel:08456004911e-mail:service@beko.co.uk

36 - EN

10 Service

Pleasekeepyourpurchasereceiptorotherproofofpurchaseinasafeplace;youwillneed to have it should the product require attention under guarantee.

Youshouldalsocompletethedetailsbelow;it will help us assist you when requesting service.(ThemodelnumberisprintedontheInstructionBookletandtheserialnumber is printed on the Rating Label affixedtotheappliance)

ModelNo:SerialNo:Retailer:Dateofpurchase:

For service under guarantee simply telephone the appropriate number below

UK Mainland & Northern IrelandFridges&Freezers 08456004903Electric Cookers 0845 600 4902Gas& 08456004905Dual Fuel Cookers

WashingMachines& 08456004906Dishwashers

Republic of IrelandAll Refrigeration, 01 862 3411All Cookers WashingMachines&Dishwashers

Beforerequestingservicepleasecheckthetrouble-shootingguideintheOperatingInstructions as a charge may be levied where no fault is found even though your product may still be under guarantee.

Service once the manufacturers guarantee has expired.

If you have purchased an extended guarantee please refer to the instructions contained within the extended guarantee agreementdocument.Otherwisepleasecall the appropriate number above where service can be obtained at a charge.

Should you experience any difficulty in obtainingservicepleasecontacttheBekoCustomer Help-Line. Tel:08456004911e-mail:service@beko.co.uk

37 - EN

38 - EN

39 - EN