automatic solvent ultrasonic...
TRANSCRIPT
Automatic solvent ultrasonic
degreaser
2S 4/2-P-F + TA 10/1
Low energy consumption
Minimal amount of space
Reduced cycle times
Non-flammable new generation solvents
Precision cleaning
Stainless steel tanks construction, thickness 20/10 mm, TIG welding, pickled;
Sloping base on tanks for ease of draining;
Discharge valves in chromed brass;
Electric heating in boil sump;
2 level control systems;
Temperature control in ultrasonic tank with PT 100 probe;
Insulation on all heated zones of the machine;
Condensing coils;
Water separator;
Piezoelectric ultrasonic group (100/200 W, 38 kHz), composed by an integrated digital generator and a transducer on the bottom of the second tank;
Aspiration system with activated carbon filter;
Refrigerating group (-25°C) with air exchanger;
Internal bund tray;
Automatic cover on solvent tanks;
Wheels and handles for ease of movement;
Electrical control panel with operator interface (Schneider);
Constructed following European rules CE;
Electrical supply: 230V 1Ph + N + T 50Hz;
Tanks dimensions: 150 x 150 x 150 h. mm about;
Overall dimensions: 622 x 870 x 1.934 h. mm about;
Standard basket dimensions: 100 x 100 x 50/350 h. mm about.
Power and manageability
DESCRIPTION
TECHNICAL SPECIFICATIONS
2S 4/2-P-F + TA 10/1 is the smallest
automatic degreasing machine
available. It packs all the features
which are the most innovative for
the degreasing of mechanical parts
by immersion in new generation of
environmentally-friendly fluorinated
solovents (HFE, HFC… ). It includes
an automatic system TA 10/1 (10Kg
load capacity), an automatic cover
on the tanks and a manual door in
front of the loading and unloading
position.
This tiny but powerful machine is
composed by a stainless steel
supporting structure which includes
two sections: the first for the pre-
cleaning in boiling solvents or
solvents vapours; the second for the
ultrasonic solvent cleaning.
Small, handy and extremely efficient
in the degreasing of small parts, this
machine has all the features you
would expect on a much larger
machine.
MEG srl
Via Rometta 13G
35018 S. Martino di Lupari (PD)
ITALY
Tel: +39 049 9461165
Fax: +39 049 9461133
e-mail: [email protected]
web: www.meg.it