automatic screen printing press - mrprint.com · automatic screen printing press store.mrprint.com...
TRANSCRIPT
Automatic Screen Printing Press
www.mrprint.comstore.mrprint.com
Challenger revolutionized screen printing in the 1980s, and Challengers have dominated the industry ever since. M&R’s Challenger III automatic screen printing press expands on that tradition by combining innovative features—like M&R’s electronically adjustable Ink Dip™ ink retrieval system—with exceptional speed and the best ideas from over 25 years of M&R automatics. Challenger III’s indexer enables double indexing in one uninterrupted motion, increasing production speed for oversize work by eliminating the pause between indexes. Challenger III automatic screen printing machines feature printheads driven by fast, reliable electric-drive motors. The printheads include calibrated tool-free click-stop four-corner off-contact settings for fast and accurate screen leveling.
All Challenger III automatic screen printing presses include tool-free front and rear print-stroke adjustment for versatility and exceptionally high production rates. Pneumatic screen clamps facilitate rapid screen loading and deliver excellent stability on a wide variety of screens. M&R’s Laser Locator System speeds pallet positioning and changeover, and it assists operators in the precise positioning of garments and cut-piece goods. The squeegee/floodbar park feature facilitates setup and tear-down by simultaneously retracting the squeegee and floodbar and then moving them to the outside edge of the press for easy access. Other standard features include squeegee pressure regulators; independent squeegee &
floodbar speed adjustments; independently-set angle and calibrated squeegee and floodbar pressure adjustments; and adjustable rear screen holders. Unlike side screen holders, which severely limit the maximum screen-frame width and maximum image area, front and rear screen holders allow easy placement of extra-wide screens for oversize and all-over screen printing. Print, reset, and print /flood speed controls on each printhead further simplify setup. Each printhead also features a socket that makes it easy to position a flash cure unit in any screen printing station. Challenger III 110 models include a wider print carriage for enhanced print quality. M&R’s Automatic Pallet Preheat Mode™ with built-in pallet temperature sensor allows operators to preheat pallets to the desired temperature with any compatible flash cure unit and track those temperatures throughout the print run.
Challenger III was built from the ground up to optimize speed, performance, flexibility, print quality, and durability. With a large touchscreen control panel featuring icon-based labeling that can display information and commands in multiple languages; an extensive variety of configurations; an unrivaled set of standard features and timesaving, output-enhancing exclusives; efficient design; and high production speed, Challenger III is poised to dominate the next decade of automatic screen printing.
CHALLENGER®
III
• 12-18 colors, 14-20 stations
• Maximum image areas from 48 x 55 cm (19" x 22") to 91 x 110 cm (36" x 43")
• Ultra-high-speed indexing system
FEATURES
CHALLENGER®
III
OPTIONS
CHALLENGER® III
Optional Cut Piece Pallet Arms provide extra stability for printing cut pieces or oversize prints
Flash:
Quartz:
Delay:
3.0
3.0
3.0
3.0
Park
ALARMS
Heads Off
Preheat Pa l lets
Speed: pcs./hr
Main Opt ions
Counter/T imers Teardown/Setup
Preheat:
3.0
Index:3.0
3.0
Heads
15.0
(Fr i ) 10:22
2
2
116215
314
413
11
12
109 8
76
5
CHALLENGER® IIISTANDARD FEATURESCAROUSEL/INDEXER• Clockwise or counterclockwise rotation
CERTIFICATION• CE Certified: Built to specifications established by the
European Committee for Standardization® (CE)
CONTROL CENTER• Automatic Pallet Preheat Mode™ with built-in pallet
temperature sensor allows operators to preheat pallets to the desired temperature using any compatible flash cure unit
• Digital touchscreen control panel with icon-based labeling can display information and commands in multiple languages
• Independent print-start/print-finish setting automatically activates and stops printheads at the beginning and end of screen printing runs
• Jog-left/jog-right controls• Maintenance Minder™ System alerts operators when
scheduled maintenance is due• Multiple (1-9) print stroke capability• Onboard self-diagnostics• Provides control of multi-print functionality • Production speed monitor ensures more accurate job costing• Real-time production data• Stopwatch feature enables users to capture elapsed time
for setup, runtime, shift time, or any other screen printing operation
• Test print setting turns individual printheads on/off during test print cycle
DESIGN & CONSTRUCTION• Built of heavy-duty steel and premium components• Printheads and pallet arms provide the stability necessary for
exceptional screen print quality
INDEX SYSTEM• Allows quick adjustment of indexing parameters tailored to
various pallet sizes• Servo drives combine higher screen printing press speeds
with exceptional smoothness, consistency, and longevity
INK DIP SYSTEM• Electronically adjustable ink retrieval system keeps ink in the
print area
LASER LOCATOR SYSTEM• Assists operators in the precise positioning of garments and
cut pieces • Speeds pallet positioning and changeover
OFF-CONTACT• Calibrated tool-free click-stop four-corner off-contact
settings allow fast and accurate screen leveling
PALLET SYSTEM• Precise three-point pallet leveling system• Tool-free quick release pallet locks
PALLETS• Solid-aluminum, low-profile, rubber-coated screen
printing pallets
PRINT CARRIAGE• Wider print carriage enhances screen print quality on 110 models
PRINTHEADS• Brushless and maintenance-free electric-drive motors deliver
smooth screen print strokes and exceptional control• Independent print and reset buttons on each printhead• Independent print/flood speed controls on each printhead
simplify press setup• Multi-print without lowering the indexer
REGISTRATION• Compatible with M&R’s Tri-Loc® Rapid Registration System• Enhanced front micro-registration adjustments with visual
guides• Rear micro-registration
REVOLVER PRINT PROGRAM• Automatically operates individual printheads in programmed
sequence and allows multiple flashing without losing a screen printing position
• Touchscreen display with simplified programming provides easy setup of the Revolver Sequencing Program
SCREEN CLAMPS & HOLDERS• Adjustable rear screen holders accommodate a wide variety
of screen sizes• Clamping system holds roller frames without special adapters• Flip-up front screen holders speed setup
• Pneumatic clamps hold frames tight and allow rapid screen loading
SQUEEGEE DAM• Gently lowers the squeegee blade onto the screen mesh when
the press is idle• Helps prevent thinner water-based and discharge inks from
flowing into the image area
SQUEEGEE /FLOODBAR• Angle and calibrated pressure adjustments are
independently set• Digital squeegee/floodbar speed display• Front or rear print carriage stop position allows operator to
leave screens clear or flooded (great for water-based inks)• Independent squeegee & floodbar speed adjustments• Park feature facilitates setup and tear-down by simultaneously
retracting the squeegee and floodbar and then moving them to the outside edge of the press for easy access
• Squeegee pressure regulator on each printhead offers exceptional control of print pressure
• Visual reference marks every 5 degrees simplify squeegee/floodbar angle adjustments
STROKE LENGTH ADJUSTMENT• Calibrated front & rear stroke length with tool-free
adjustment maximizes screen printing speed
WARRANTY, SERVICE AND SUPPORT• 24-hour hotline is staffed 365 days a year• Access to M&R’s Training Center• Parts & supplies are available online at store.mrprint.com • Two-year limited warranty
CUT-PIECE PALLET ARMS • Heavy-duty reinforced pallet arms with wider pallet mounting
brackets for oversize and cut-piece screen printing
FOLD-DOWN PRINTHEAD SUPPORTS• Enable easy loading of screens more than 71 cm (28") wide
FOOT PEDAL CONTROL• Allows indexing of the press using a foot pedal• Skip-Shirt foot pedal feature allows operators to avoid screen
printing on empty pallets
OPTICAL NO-SHIRT DETECTOR• Automatically prevents the press from screen printing on empty
pallets• Reduces misprints and minimizes press stoppage because of
improperly loaded shirts
PALLETS• M&R aluminum pallets and platens come in a wide range of
sizes and styles
SQUEEGEE / FLOODBAR• Pneumatic squeegee/floodbar locks with tool-free angle
adjustment
STANDARD(Every Printhead)MODEL COLORS
MAXIMUM WIDTH(Alternating Printheads)
MAXIMUM LENGTH(Alternating Printheads)
Challenger III 70 12 Colors14 Colors16 Colors18 Colors
Challenger III 110 14 Colors1
16 Colors18 Colors
110 cm (43")
66 cm (26")
50 cm(20")
x 70 cm(28")
110 cm (43") N/A
132 cm (52")
114 cm (45")x
70 cm (28")
110 cm (43")
66 cm (26")
50 cm(20")
x 70 cm(28")
114 cm (45")
132 cm (52")
114 cm (45")x
76 cm (30")152 cm (60")
110 cm (43")
91 cm (36")x
110 cm (43")
Maximum Image Size1 Specifications may vary within models. See the back page for complete specifications.
Maximum Frame Size
70/110 MAXIMUM SCREEN WIDTH 110 MAXIMUM SCREEN LENGTH
70/110 STANDARD
DIMENSIONS
M&R Sales and Service, Inc. 440 Medinah Road, Roselle, Illinois 60172-2329 USAUSA: 800-736-6431 / 630-858-6101 • Outside USA: +1-847-967-4461 • FAX: 630-858-6134M&R Printing Equipment, Inc. and its subsidiaries (hereinafter M&R), believe the information in this advertisement to be accurate at publication, though it does not purport to list all manufacturing and specification variations, nor does it assume liability resulting from incompleteness or inaccuracy. M&R reserves the right to change specifications without notice. M&R expressly disclaims any liability for damages, consequential or incidental, from purchase, installation, servicing, and/or use of any product/service based upon information herein. No warranties of merchantability or fitness for a particular purpose are made or are to be implied from the information herein. No information herein may be reproduced or used in any manner without the prior, express written consent of M&R in each case. Copyright 2016 M&R Printing Equipment, Inc. All rights reserved. 20160526
Challenger III 70 14/12
Challenger III 70 16/14
Challenger III 70 18/16
Challenger III 70 20/18
Air @ 6,9 bar (100 psi) 609 l/min (21.5 cfm) 680 l/min (24 cfm) 779 l/min (27.5 cfm) 877 l/min (31 cfm)Diameter 561 cm (221") 605 cm (238") 650 cm (256") 691 cm (272") Electrical Requirements 1 208-230 V, 3 ph, 50 A, 50/60 Hz, 10 kW
380-415 V, 3 ph, 29 A, 50/60 Hz, 10 kW208-230 V, 3 ph, 53 A, 50/60 Hz, 10.5 kW380-415 V, 3 ph, 31 A, 50/60 Hz, 10.5 kW
208-230 V, 3 ph, 59 A, 50/60 Hz, 11 kW380-415 V, 3 ph, 34 A, 50/60 Hz, 11 kW
208-230 V, 3 ph, 62 A, 50/60 Hz, 12 kW380-415 V, 3 ph, 36 A, 50/60 Hz, 12 kW
Maximum Frame Size (Alternating Printheads) 132 x 110 cm (52" x 43") 132 x 110 cm (52" x 43") 132 x 110 cm (52" x 43") 132 x 110 cm (52" x 43")Maximum Image Area (Alternating Printheads) 2 114 x 70 cm (45" x 28") 114 x 70 cm (45" x 28") 114 x 70 cm (45" x 28") 114 x 70 cm (45" x 28")Maximum Standard Frame Size 66 x 110 cm (26" x 43") 66 x 110 cm (26" x 43") 66 x 110 cm (26" x 43") 66 x 110 cm (26" x 43")Maximum Standard Image Area 2 50 x 70 cm (20" x 28") 50 x 70 cm (20" x 28") 50 x 70 cm (20" x 28") 50 x 70 cm (20" x 28")Shipping Weight 3892 kg (8580 lb) 4178 kg (9210 lb) 4491 kg (9900 lb) 5130 kg (11 310 lb)Standard Pallet Size 41 x 56 cm (16" x 22") 41 x 56 cm (16" x 22") 41 x 56 cm (16" x 22") 41 x 56 cm (16" x 22")Stations/Colors 14/12 16/14 18/16 20/18
Challenger III 110 16/14
Challenger III 110 18/16
Challenger III 110 20/18
Air @ 6,9 bar (100 psi) 680 l/min (24 cfm) 779 l/min (27.5 cfm) 877 l/min (31.5 cfm)Diameter 605 cm (238") 650 cm (256") 691 cm (272")Electrical Requirements 1 208-230 V, 3 ph, 53 A, 50/60 Hz, 10.5 kW
380-415 V, 3 ph, 31 A, 50/60 Hz, 10.5 kW208-230 V, 3 ph, 59 A, 50/60 Hz, 11 kW380-415 V, 3 ph, 34 A, 50/60 Hz, 11 kW
208-230 V, 3 ph, 62 A, 50/60 Hz, 12 kW380-415 V, 3 ph, 36 A, 50/60 Hz, 12 kW
Maximum Print Length Frame Size (Alternating Printheads) 104 x 152 cm (41" x 60") 110 x 152 cm (43" x 60") 110 x 152 cm (43" x 60")Maximum Print Length Image Area (Alternating Printheads) 2 86 x 110 cm (34" x 43") 91 x 110 cm (36" x 43") 91 x 110 cm (36" x 43")Maximum Print Width Frame Size (Alternating Printheads) 132 x 114 cm (52" x 45") 132 x 114 cm (52" x 45") 132 x 114 cm (52" x 45")Maximum Print Width Image Area (Alternating Printheads) 2 114 x 76 cm (45" x 30") 114 x 76 cm (45" x 30") 114 x 76 cm (45" x 30")Maximum Standard Frame Size 66 x 110 cm (26" x 43") 66 x 110 cm (26" x 43") 66 x 110 cm (26" x 43")Maximum Standard Image Area 2 50 x 70 cm (20" x 28") 50 x 70 cm (20" x 28") 50 x 70 cm (20" x 28")Shipping Weight 4178 kg (9210 lb) 4491 kg (9900 lb) 5130 kg (11 310 lb)Standard Pallet Size 41 x 56 cm (16" x 22") 41 x 56 cm (16" x 22") 41 x 56 cm (16" x 22")Stations/Colors 16/14 18/16 20/18
1 If incoming voltage differs from the voltage(s) listed in this brochure, calculate amperage accordingly. Other electrical configurations are available: Contact The M&R Companies for details.2 Custom configurations offer a wide range of maximum image areas. Please contact M&R for details.
CHALLENGER® IIICHALLENGER® III
Adjustable rear screen holders accommodate a wide variety of screen sizes Independent controls on each printhead simplify press setup
PRODUCT DETAILS
SPECIFICATIONS
Large Screen
Standard Screen