autocad project report daksh cad technology.doc
TRANSCRIPT
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
1/58
AUTO CAD
Mechanical, Civil
AutoCAD 2010
AutoCAD 2D & 3D Drawing 60 Hrs
Part 1. The Basics of computer Aided Design Techniques
The AutoCAD WindowThe Pull Down Menu
The Toolbars
Working with AutoCAD
Part 2. Building of the Basics
Editing Enhancing Your Drawing Skills
Printing, Plotting & Laouts
Adding Te!t to Drawing
Part 3. Becoming an Expert
Drawing Cur"es & Solid #ills
Adding Attributes to $locks
Working with Area o% an b'ect
Part 4. 3D Modeling & maging
(ntroducing )D Solid *erations on +D Drawing
sing Ad"ance )D #eatures
-endering )D Drawings
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
2/58
AUTO CADMechanical, Civil
AutoCAD 2010
AutoCAD 2D & 3D Drawing 120 HrsThe Basics of computer Aided Design Techniques
Creating & Editing ele.entar b'ects
Ad"anced Drawing b'ectsAd"anced Editing co..ands
rgani/ing Drawing with laers
Te!t Annotation
Di.ensioning
Pollines & S*lines
$locks
Arrtibutes
!uto"!D 3D and sometric
(ntroduction to )D
)D co..ands
Editing )D Drawing
Shading, -endering & Ani.ation
Creating Scri*ts & Slide Libraries
CAD on the (nternet
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
3/58
AKSH E UCATIONHISSAR
TRAINING REPORT
ON
Pro-E
SUBMITTE BY
ROSHAN KIRORIR.NO.- 9416590144
HARYANA INSTITUTE OF ENGINEERING &TECHNOOGY
KAITHA.
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
4/58
COMPANY PRO!"#
Compan$ Pro%ile
DAKH Education Cad Technologies was esta!lished in August" 1### !y $r%
oshan 'al Kirori at Hisar% (ro) then we are *ro+iding training in CAD,CA$,CAE% -e
ha+e trained nu)!er o. students o. $echanical" /roduction" Ci+il" and Architect
Engineering% -e ha+e also worked on ndustrial li+e *roects%
Our %acult$ has more than Nine $ears #&perience in design %ield' (tudents
coming to us %or !ndustrial Training )ill *e initiall$ trained on these plat%orms then
)ill *e put on to live Design pro+ects' (ome o% our students are )oring )ith )ell
reputed companies lie (onalia, Pun+a* Tractor "imited, !D#( !n%oTech "td',
(teel (trip -heels . man$ more'
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
5/58
Scope of CAD/CAM/CAE
ntegrated CAD,CA$,CAE o.twares like /ro,Engineer" DEA" olid
-orks" Autodesk 3D $a" $aya & CATA hel* )anu.acturers o*ti)i4e
*roduct conce*t early in Design *rocess" ena!ling the) to signi.icantly
i)*ro+e *roduct 5uality" while reducing *roduct de+elo*)ent ti)e and cost
$oreo+er *eo*le ha+ing 3D CAD,CA$,CAE knowledge ha+e !etter
chances o. growth" i))ediate e)*loya!ility a.ter co)*letion o. course"
graduation and chances o. o!s a!road%
As the )arket econo)y o*ens )ore and )ore it has !eco)e etre)ely
co)*etiti+e and with this state o. econo)y" skilled *eo*le *lay the )ost
i)*ortant role in organi4ation% Hence it !eco)es i)*erati+e on the *art o.
to* Tool oo) Training centers and Engg% Colleges to es*ecially look .or
new initiati+es towards i)*ro+ing the skills and knowledge o. students%
An e)erging trend o. Engg% Education in Tool oo) and the world is the
ra*id incre)entation o. CAD,CA$,CAE so.tware as an essential *art o.
curriculu)%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
6/58
The *ri)ary reasons .or this trend are enu)erated as .ollows
a*id shi.t .ro) )anual Design and /roduction syste) o. Engg% ndustry
to highly *roducti+e 5uality and cost e..ecti+e CAD,CA$,CAE syste)%
n .act )ost o. Tool and Die" Auto)oti+e" Hea+y Engg%" ndustrial
E5ui*)ent industry etc% in ndia and the -orld are totally working on
CAD,CA$,CAE e5ui*)ent% n continuation in a!o+e *oints )any o.
co)*anies as recruiters are looking at CAD,CA$,CAE knowledge as
*art o. essential *ro.ile o. recruiting students%
Knowledge o. CAD,CA$,CAE syste) shall !e an added wea*on .or
students seeking ad)ission to *ost graduate $%% courses and o!s
a!road%
These CAD,CA$,CAE syste)s shall *ro+e to !e an ecellent tool .or
ndustry" esearch setu* .or /ro.essors and Acade)ically 7ent tudents%
The 5uestion" -hich are the industries that need )ore skilled )an *ower
and what .or these seg)ents skill sets are a+aila!le" such o. these
seg)ents are
Tool oo) /rocess $,C Hea+y Engg% ndustries
$,C Tool De.ence
Auto)o!ile Auto Ancillaries
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
7/58
-OR/!N0 -!T1 CAD2CAM2CA# T#C1NO"O0Y Essentially design is a decision )aking *rocess where thediscretion and knowledge o. the designer *lay a great role% -hile )an still
.inally controls decision)aking" the co)*uter has ser+ed to ease the
designer8s task%
Daksh Education Cad Technology
$ATE$9DE'E
CAD CA$ CAE
T99' /ATH
:E;EAT9;
$-HE; 79D= ;
TATE 9( ET?
D=;A$C A;A'=
>-HE; 79D= ;
TATE 9( $9T9;?
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
8/58
0#OM#TR!C MOD#""!N03 4 Design in+ol+es the de+elo*)ent o. the sha*e and di)ensions o. aco)*onent% During designing se+eral .actors are to !e considered
si)ultaneously% o)e o. the) are stress re5uire)ents" )ethod o.
)anu.acture% :eo)etric )odeling is the .irst ste* in CAD% A geo)etric)odel is created on the screen using di..erent techni5ues% 9nce creating this
)odel can !e easily altered in geo)etry and con.iguration to yield a
satis.actory sha*e% The net ste* is deciding on the eact di)ensions% The
results o. geo)etric )odeling will .urther !e use !y CA$ in the *re*aration
o. ;C ta*es .or the co)*onent%
#N0!N##R!N0 ANA"Y(!(3 4 The )ost i)*ortant .unction o. CAD is engineering analysis%
Engineering analysis !asically in+ol+es deciding the eact di)ensions o. the
co)*onent% These +alues ha+e to !e arri+ed at !y analy4ing the co)*onent
in ter)s o. the loads it has to withstand in .unction% CAD *ro+ides
so*histicated )ethod like the .inite ele)ent techni5ue%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
9/58
asse)!lies can !e created interacti+ely and *lotted in a!out one tenth o. the
nor)al ti)e% Auto)ated dra.ting has resulted in enor)ous *roducti+ity
gains in ter)s o. ti)e" la!our and e*enses%
#5P#RT (Y(T#M(3 4 The latest de+elo*)ent in CAD is the use o. E*ert syste)s% AnE*ert syste) has an @ intelligent data!ase called knowledge !ase and
reasoning logic% t )ay contain" .or ea)*le" the details o. the !reakdowns
that occurred in the industry% 9n a later date" the user has only to .eed in the
conditions under which a !reakdown occurred% The e*ert syste) disco+ers
the reason .or the !reakdown% This is only one a**lication o. e*ert syste)s%
-here+er decision )aking under )ulti*le constraints is in+ol+ed e*ert
syste)s are used as logic su**ort syste)s%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
10/58
(Y(T#M D#(!0N CYC"#6Conventional design c$cle7 (or sol+ing any design *ro!le) or engineering *ro!le)" the
general *rocedure )ay !e .ollowed%
Daksh Education Cad Technology
EC9:;T9; 9( A ;EED
/EC(CAT9; A;DEB
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
11/58
R#CO0N!T!ON O A N##DThis as*ect o. design can ha+e its origin in )any nu)!ers o.
sources% Custo)er re*orts on the *roduct .unction and 5uality )ay .orce a
redesign% The starting *oint o. a design *roect is a hy*othetical need which
)ay ha+e !een o!ser+ed in socioecono)ic scene% The need )ay !e eistingor )ay not yet eist" !ut the e+idence )ay !e eisting that the need is latent%
The .ollowing *oints will hel* at this stage
1% tudy the nature o. the need%
2% Esta!lish the need reasona!ly well to the etent *ossi!le%
3% $ake *ri)iti+e state)ent o. need%
% Do reconnaissance study with res*ect to 5ualitati+e and
5uantitati+e as*ects%
(P#C!!CAT!ON AND R#8U!R#M#NT( 9nce a need has !een esta!lished" its re5uire)ents )ust !e
care.ully s*elled out% ery o.ten the s*eci.ications are stated in such general
ter)s as to indicate that the consu)er has only a +ague idea o. what he
wants% n these re5uire)ents design and *er.or)ance re5uire)ents are
care.ully stated% Also" the s*eci.ications are *re*ared kee*ing in )ind the
*roduction co)*etence and ca*a!ility o. the co)*any%
#A(!9!"!TY (TUDY9nce the *ro!le)8s need has !een esta!lished and the
s*eci.ications ha+e !een *re*ared" acce*ted and su!)itted" the .easi!ility
study is done% The *ur*ose o. this study is to check the *ossi!ility o. success
or .ailure o. the *ur*osed *roect !oth .ro) technical and econo)ic
stand*oint% n this study" +arious 5uestions are to !e answered%
1% s any natural law !eing de.ied
2% Are so)e o. the s*eci.ications !eyond what is technically
a+aila!le at *resent3% s there any de*endence on source )aterials
% -ill the cost o. the end *roduct !e too high
The *ersons doing the .easi!ility study will !e the engineers with strong
design !ackground" knowledge o. engineering science" a good knowledge o.
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
12/58
)aterial usage" knowledge o. *roduction )ethods and re5uire)ents o. the
sales de*art)ent%
CR#AT!:# D#(!0N (YNT1#(!(
9nce the .easi!ility o. the design is esta!lished" the creati+edesign synthesis has to !e done% Here" the designer can act as engineer"
in+entor" artist all in one" !ecause now he is called u*on to create%
The 5uantities o. the new design will !e
1% The 5uality o. newness or uni5ueness%
2% Things" which are either use.ul or a**reciated" are called creati+e%
Creati+e things are so)eti)es either *ur*ose.ul or !eauti.ul or
!oth%
3% The third 5uality in the design solution will !e that it will ha+e
si)*licity% A solution ha+ing the 5ualities o. newness and use.ul or
a**reciated !ut co)*le would not !e known as a creati+e solution%
PR#"!M!NARY D#(!0N AND D#:#"OPM#NT A.ter the *rocess o. creati+ity design is co)*lete" there will !e one
or )ore *ossi!le designs that satis.y the gi+en set o. s*eci.ications and
re5uire)ents% t then !eco)es necessary to decide which o. the solutions to
choose .or the *reli)inary design and de+elo*)ent stage% ;ote" this stage is
*ri)arily concerned with checking the +alidity o. the .unctional and o+erall
si4e re5uire)ents o. the s*eci.ications%
The stages o. the *reli)inary design can !e su))ari4ed as !elow1% election o. the )ost use.ul solution .ro) the se+eral suggested
solutions%
2% (or)ulation o. use.ul )odel *re.era!ly )athe)atical .or this
selected solution%
3% Analysis o. this )odel%
% /rediction o. *er.or)ance%
F% /re*aring layout o. the selected solution" )aking a check .or its
.unction%
D#TA!"#D D#(!0N $any designers o.ten )iss )any o. the acti+ities o. the detailed
design *hase o. the design *rocess" *articularly .or s)aller o!s" !ecause so
)uch o. the detailing in the sense o. co)*onent design is already done in
the *reli)inary design *hase% This *hase o. the design work consists o. two
)aor acti+ities
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
13/58
>1? Detailing the *arts" co)*onent and their asse)!ly%
>2? :oing into su..icient details o. )anu.acture in i)*le)enting the
design%
The second *hase as indicated earlier re5uires a good knowledge o.
)anu.acturing *rocess% The )ethod o. )anu.acturing should !e such that
the .ollowing are a+oided%
>1? Hea+y weight o. )aterial
>2? ecla)*ing o. work
>3? *ecial *ur*ose tools
>? (inishing o*erations
PROTOTYP# 9U!"D!N0 AND T#(T!N0 A.ter co)*leting all the details" the su!asse)!lies and asse)!ly
drawings including the )aterials and *arts list" the co)*leted design is sentto the *rototy*e or )odel sho* .or .a!rication% At this uncture the *arts are
.a!ricated" co))ercial co)*onents are *urchased" and the )achine or
syste)" a.ter ha+ing !een asse)!led" is ready .or e+olution and testing% This
testing can hel* in
1% /roducing acce*ta!le *er.or)ance
2% To generate new design in.or)ation
3% To de+elo* i)*ro+ed design conce*ts
% To increase +alidity o. the results%
D#(!0N OR PRODUCT!ON n addition to !eing .unctionally sound" a *roduct )ust ha+e sales
a**eal and )ust !e co)*etiti+e in *rice% n order .or a *roduct to !e )ade
econo)ically" it )ust !e designed so that the )ost a**ro*riate )aterial and
*rocesses will !e utili4ed% This is called @ design .or *roduction% (or large
scale )anu.acturing" any o. these *rocesses )ay !e )ore econo)ical than
indi+idual *art )achining%
PRODUCT R#"#A(# /roduction *rototy*e are usually )ade and tested" and anydraw!ack that can !e easily corrected is generally re.erred !ack to
*reli)inary design and de+elo*)ent or to detailed design .or alteration%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
14/58
AD:ANTA0#( O CAD
CAD can )ake a dra.t )en )uch )ore e..icient% De*ending
u*on the dra.ting task" two to ten ti)es *roducti+ity i)*ro+e)ent is not
unco))on when using a CAD syste) %The .ollowing are the ad+antages o.using CAD o+er )anual dra.ting
R#:!(!ON(3 4 9ne o. the )ost ti)econsu)ing tasks that a dra.t )an *er.or)s is
)aking changes to eisting drawings% -ith a CAD syste)" re+isions are
)uch .aster than )anual )ethods% A.ter a drawing has !een co)*leted" it is
stored and can !e recalled at any ti)e to )ake changes easily%
E/TT9; i)*le sy)!ols or )ore co)*le ones " are created !y drawingthe) with the CAD syste) and storing the) away to !e used at any ti)e%
9nce a drawing has !een *roduced and stored in the co)*uter8s )e)ory" it
does not ha+e to !e drawn again i. it is *art o. another drawing% /arts o.
*re+ious drawings can !e co)!ined to *roduce new drawings%
ACCURACY3 4 Di)ensions are keyedin using the co)*uter key!oard or )enu
instead o. reading a scale% $ating *arts can !e checked .or .it !y ha+ing the
co)*uter )atch the *arts on the screen !e.ore hard co*ies are *roduced%
(P##D3 4 n al)ost all areas o. dra.ting" CAD is .aster than )anual drawing%This is es*ecially true as the o*erator !eco)es )ore *ro.icient through
continued use o. the syste)
N#ATN#((3 4 A.ter the drawing has !een *roduced on screen" it can !e drawn on
*a*er with a *lotter% The )echanical *lotting o. a drawing *roduces clean"
accurate and neat drawings using *ro*er line weight and consistency" and
shar*" consistent lettering%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
15/58
CO(T3 4 n the *ast" CAD syste)s were an e*ensi+e alternati+e to )anual
dra.ting" and only )aor industrial cor*orations could a..ord the)% ;ow"
!ecause o. reduced cost o. )e)ory" increased co)*etition" and i)*ro+ed
so.tware and co)*uter technology CAD syste)s are a..orda!le to )ostdra.tingdesign o..ices%
D!#R#NT TYP#( O CAD2CAM (OT-AR#
1% ;TE:ATED CAD,CA$ =TE$ /ro,engineer" DEA
CATA"
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
16/58
-hy industries switcs towards 3d technology
7ecause 3d )odel is centreled to all the acti+ities *ertaining to
analysis")anu.acturing"*roduct conce*t& custo)er re5uire)ents%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
17/58
A79'
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
18/58
PO"AR COORD!NAT# (Y(T#M(
/olar coordinate syste)s use a distance and an angle to locate a *oint% -hen you enter
*olar coordinate +alues" you indicate a *oints distance .ro) the origin or .ro) the
*re+ious *oint and its angle along the G= *lane o. the current coordinate syste)%
To enter a *olar coordinate" enter a distance and an angle" se*arated !y an angle !racket
>O?% (or ea)*le" to s*eci.y a *oint at a distance o. 1 unit .ro) the *re+ious *oint and atan angle o. F degrees" enter I1OF%
7y de.ault" angles increase in the counterclockwise and decrease in the clockwise
direction% To )o+e clockwise" enter a negati+e +alue .or the angle% (or ea)*le" entering1OF is the sa)e as entering 1O31F% =ou can change the angle direction and set the !ase
angle on the
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
19/58
CR#AT!N0 O9;#CT( !N AUTOCAD
LINE
A line can !e one seg)ent or a series o. connected seg)ents" !ut each seg)ent is a
se*arate line o!ect%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
20/58
(irst draw the line seg)ent%
1 (ro) the Draw )enu" choose /olyline%2 *eci.y the start *oint o. the line seg)ent >1?%
3 *eci.y the end*oint o. the line seg)ent >2?%
Enter a to switch to Arc )ode%
F *eci.y the end*oint o. the arc >3?%6 Enter l to return to 'ine )ode%
R Enter the distance and angle o. the line in relation to the end*oint o. the arc% =ou
can enter these relati+e +alues in the .or) IdistanceOangle%Q /ress E;TE to end the *olyline%
A.ter you+e created a *olyline" you can edit it with /EDT or use EG/'9DE to con+ertit to indi+idual line and arc seg)ents% -hen you e*lode a wide *olyline" the line widthre+erts to 0 and the resulting line seg)ents are *ositioned along the center o. what was
the wide *olyline%
MULTILINE
$ultilines consist o. !etween 1 and 16 *arallel lines" called ele)ents% =ou *osition the
ele)ents !y s*eci.ying the desired o..set o. each ele)ent .ro) the origin o. the )ultiline%=ou can create and sa+e )ultiline styles or use the de.ault style" which has two ele)ents%
=ou can set the color and linety*e o. each ele)ent and dis*lay or hide the oints o. the
)ultiline% Soints are lines that a**ear at each +erte% There are se+eral ty*es o. end ca*s
you can gi+e the )ultiline" .or ea)*le" lines or arcs%
Ea)*les o. )ultilines
Creating Multiline (t$les
To create a )ultiline style
1 (ro) the (or)at )enu" choose $ultiline tyle%
2 n the $ultiline tyles dialog !o" enter a na)e and
descri*tion .or the style%Descri*tions are o*tional and can !e u* to 2FF characters" including s*aces%
3 To create a )ultiline style" choose Add%
To add ele)ents to the style or to )odi.y eisting ele)ents" choose Ele)ent/ro*erties%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
21/58
F n the Ele)ent /ro*erties dialog !o" highlight the ele)ent in the list" and then
)ake changes to 9..set" Color" and 'inety*e%
6 To add an ele)ent" choose Add" and then )ake changes to 9..set" Color" and'inety*e% Choose 9K%
The o..set de.ines the 0"0 origin o. the )ultiline relati+e to which other ele)ents
are drawn% An ele)ent does not ha+e to !e drawn at the origin%R To set )ultiline *ro*erties" choose $ultiline /ro*erties in the $ultiline tyles
dialog !o%
Q n the $ultiline /ro*erties dialog !o" )ake any changes and choose 9K%/ro*erties include the dis*lay o. seg)ent oints and the ty*e o. start and end ca*s
with their angles and .ill color%
# Choose a+e to sa+e the style to an eternal )ultiline style .ile >the de.ault is
acad%)ln?% =ou can sa+e )ultiline styles to the sa)e .ile%
. you create )ore than one )ultiline style" sa+e the current style !e.ore creating a new
one or you lose the changes to the .irst style%=ou can add u* to 16 ele)ents to a )ultiline style% . you create or )odi.y an ele)ent so
that it has a negati+e o..set" it a**ears !elow the origin in the i)age tile o. the $ultilinetyles dialog !o%
To s*eci.y the *ro*erties o. the entire )ultiline
1 (ro) the (or)at )enu" choose $ultiline tyle%
2 n the $ultiline tyles dialog !o" choose $ultiline /ro*erties%3 n the $ultiline /ro*erties dialog !o" select Dis*lay Soints to dis*lay a line at the
+ertices o. the )ultiline%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
22/58
POLYGON
/olygons are closed *olylines with !etween 3 and 1"02 e5uallength sides% =ou draw a
*olygon !y inscri!ing it in" or circu)scri!ing it a!out" an i)aginary circle or !y
s*eci.ying the end*oints o. one o. the edges o. the *olygon% 7ecause *olygons alwaysha+e e5uallength sides" they *ro+ide a si)*le way to draw s5uares and e5uilateral
triangles%
2?
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
23/58
The two s*eci.ied *oints deter)ine the diagonal corners o. a rectangle with sides *arallel
to the G and =ais o. the current
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
24/58
1 (ro) the Draw )enu" choose Circle Center" adius%
2 *eci.y the center *oint%
3 *eci.y the radius%
To create a circle that is tangent to two o!ects" s*eci.y a tangent *oint on each o. the
o!ects and the radius o. the circle% The tangent *oint can !e any *oint on the o!ect% n
the .ollowing illustrations" the darker circle is the one !eing drawn" and the tangent *ointsare *oints >1? and >2?%
Circles created tangent to two o!ects
To create a circle tangent to eisting o!ects
1 (ro) the Draw )enu" choose Circle Tan" Tan" adius%
=ou are now in Tangent sna* )ode%
2 elect the .irst o!ect to draw the circle tangent to%
3 elect the second o!ect to draw the circle tangent to% *eci.y the radius o. the circle%
To create a circle tangent at two or three *oints" set 9;A/ to Tangent and use the two
*oint or three*oint )ethod to create the circle >see Pna**ing to /oints on 9!ectsP?%
ARC
=ou can create arcs in )any ways% The de.ault )ethod is to s*eci.y three *ointsVa start
*oint" a second *oint on the arc" and an end*oint% =ou can also s*eci.y the includedangle" radius" direction" and chord length o. arcs% The chord o. an arc is a straight line
!etween the end*oints% 7y de.ault" AutoCAD draws arcs counterclockwise%
n the .ollowing ea)*le" the start *oint o. the arc sna*s to the end*oint o. a line% Thesecond *oint o. the arc sna*s to the )iddle circle%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
25/58
To draw an arc !y s*eci.ying three *oints
1 (ro) the Draw )enu" choose Arc tart" Center" End%2 *eci.y the start *oint >1? !y entering end* and selecting the line%
The arc sna*s to the end*oint o. the line%
3 *eci.y the second *oint >2? !y entering cen and selecting the eisting arc tode.ine the center o. the arc%
*eci.y the end*oint o. the arc >3?%
n the .ollowing illustrations" the center o. an eisting circle is used as the center o. the
arc% 9nce you s*eci.y the center and start *oints o. the arc" you co)*lete the arc !ys*eci.ying the chord length% The distances shown in these illustrations .ro) one end*oint
to the cursor are chord lengths%
To draw an arc using a start *oint" a center *oint" and a chord length
1 (ro) the Draw )enu" choose Arc tart" Center" 'ength%
2 *eci.y a start *oint >1?%
3 *eci.y the center *oint >2?%
*eci.y the chord length%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
26/58
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
27/58
ELLIPSE
=ou can create .ull elli*ses and elli*tical arcs" !oth o. which are eact )athe)atical
re*resentations o. elli*ses% The de.ault )ethod o. drawing an elli*se is to s*eci.y theend*oints o. the .irst ais and the distance" which is hal. the length o. the second ais%
The longer ais o. an elli*se is called the )aor ais" and the shorter one is the )inor
ais% The order in which you de.ine the aes does not )atter%
n the .ollowing *rocedure" you draw an elli*se using the de.ault )ethod and the *ointing
de+ice% Here" the .irst ais is the )aor ais" and the second is the )inor% The distance
increases as you drag the *ointing de+ice away .ro) the )id*oint%
To draw a true elli*se using end*oints and distance
1 (ro) the Draw )enu" choose Elli*se Ais" End%
2 *eci.y the .irst end*oint o. the .irst ais >1?%3 *eci.y the second end*oint o. the .irst ais >2?%
Drag the *ointing de+ice away .ro) the )id*oint >3? o. the .irst ais and click tos*eci.y the distance%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
28/58
=ou can *ro+ide a rotation angle instead o. a distance or draw the elli*se !ased on a
center *oint" an end*oint o. one ais" and hal. the length o. the other ais%
Elli*ses created !y s*eci.ying ais end*oints and distance
n the illustrations a!o+e" *oints 1 and 2 are the end*oints o. the .irst ais" and *oint 3
de.ines the distance >hal. the length? o. the second ais% The elli*se at the le.t is drawn !ys*eci.ying the center >1? and two aes% The end*oint o. the .irst ais is at *oint 2" and
*oint 3 de.ines hal. the length o. the second ais%
DONUT
Drawing donuts is a 5uick way to create .illed rings or solid.illed circles% Donuts are
actually closed *olylines that ha+e width% To create a donut" s*eci.y its inside and outside
dia)eters and its center% =ou can continue creating )ulti*le co*ies with the sa)edia)eter !y s*eci.ying di..erent centers until you *ress E;TE to end the co))and% To
create solid.illed circles" s*eci.y an inside dia)eter o. 0%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
29/58
POINT
/oint o!ects can !e use.ul" .or ea)*le" as node or re.erence *oints that you can sna* toand o..set o!ects .ro)% =ou can set the style o. the *oint and its si4e relati+e to the
screen or in a!solute units%
HATCHING AREAS
Hatching .ills a s*eci.ied area in a drawing with a *attern% =ou can hatch an enclosedarea or a s*eci.ied !oundary using the 7HATCH and HATCH co))ands%
7HATCH creates associati+e or nonassociati+e hatches% Associati+e hatches are linked to
their !oundaries and are u*dated when the !oundaries are )odi.ied% ;onassociati+e
hatches are inde*endent o. their !oundaries% 7HATCH de.ines !oundaries auto)atically
when you s*eci.y a *oint within the area to !e hatched% Any whole or *artial o!ects thatare not *art o. the !oundary are ignored and do not a..ect the hatch% The !oundary can
ha+e o+erhanging edges and islands >enclosed areas within the hatch area? that youchoose to hatch or lea+e unhatched% =ou can also de.ine a !oundary !y selecting o!ects%
HATCH creates nonassociati+e hatches only% t is use.ul .or hatching areas that do notha+e closed !oundaries%
A.ter you+e created a hatch" you can edit it with HATCHEDT or e*lode it into
co)*osite lines using the EG/'9DE co))and%
=ou can de.ine a hatch !oundary !y s*eci.ying *oints directly% (or ea)*le" you )ay
want to illustrate a *attern .ill in a s)all section o. a drawing" as shown in the .ollowing
illustration%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
30/58
sland detection )ethods s*eci.y whether to include o!ects within the outer)ost!oundary as !oundary o!ects when you are using /ick /oints% These internal o!ects are
known as islands% 7y de.ault" AutoCAD uses the (lood island detection )ethod% The
(lood )ethod includes islands as !oundary o!ects" as shown in the .ollowing
illustration% How AutoCAD hatches the detected islands de*ends on the island detectionstyle% The .ollowing illustration uses the ;or)al island detection style" )eaning that
islands re)ain unhatched and islands within islands are hatched%
-hen you use /ick /oints to de.ine your !oundaries" you can re)o+e any detectedislands .ro) your !oundary de.inition%
=ou can control how AutoCAD hatches islands detected as !oundaries using the three
island detection styles ;or)al" 9uter" and gnore%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
31/58
SNAPING TO POINTS ON OBJECTS
During drawing co))ands" you can sna* the cursor to *oints on o!ects such asend*oints" )id*oints" centers" and intersections% (or ea)*le" you can turn on o!ect
sna*s and 5uickly draw a line to the center o. a circle" the )id*oint o. a *olyline
seg)ent" or the a**arent intersection o. two lines%=ou turn on o!ect sna*s in one o. two ways
ingle *oint >or o+erride? o!ect sna*s ets an o!ect sna* .or one use%unning o!ect sna*s ets o!ect sna*s until you turn the) o..%
To sna* to a *oint on an o!ect
1 tart a co))and re5uiring you to s*eci.y a *oint >.or ea)*le" AC" CC'E"
C9/=" ';E or $9E?%
2 -hen the co))and *ro)*ts you to s*eci.y a *oint" choose an o!ect sna* usingone o. the .ollowing )ethods
Click a tool!ar !utton on the tandard tool!ar 9!ect na* .lyout or on the 9!ectna* tool!ar%
/ress H(T and rightclick in the drawing area" and choose an o!ect sna* .ro)
the shortcut )enu%Enter an o!ect sna* a!!re+iation on the co))and line%
3 $o+e your cursor o+er the sna* location and click%
A.ter you click to the sna* *oint" the o!ect sna* clears% . you select any *oint other thanthe o!ect sna* *oint" AutoCAD dis*lays an in+alid *oint )essage%
n addition to single*oint o!ect sna*s" you can turn on running o!ect sna*s% unningo!ect sna*s stay on until you turn the) o..% =ou can also turn on )ore than one running
o!ect sna* at a ti)e%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
32/58
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
33/58
WORKING WITH BLOCKS
A !lock is a collection o. o!ects you can associate together to .or) a single o!ect" or!lock de.inition% =ou can insert" scale" and rotate a !lock in a drawing% =ou can e*lode
a !lock into its co)*onent o!ects" )odi.y the)" and rede.ine the !lock% AutoCAD
u*dates all current and .uture instances o. that !lock !ased on the !lock de.inition%7locks strea)line the drawing *rocess% (or ea)*le" you can use !locks to
o 7uild a standard li!rary o. .re5uently used sy)!ols" co)*onents" or standard
*arts% =ou can insert the sa)e !lock nu)erous ti)es instead o. recreating thedrawing ele)ents each ti)e%
o e+ise drawings e..iciently !y inserting" relocating" and co*ying !locks as
co)*onents rather than indi+idual geo)etric o!ects%
o a+e disk s*ace !y storing all re.erences to the sa)e !lock as one !lock de.inition
in the drawing data!ase%
-hen you insert a !lock in your drawing" you are creating a !lock instance% Each ti)e
you insert a !lock instanceN you assign a scale .actor and rotation angle to the inserted!lock% =ou can also scale a !lock instance using di..erent +alues in any coordinate >G" ="
J? direction%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
34/58
EDITING METHODS
EDITING WITH GRIPS
. gri*s are turned on" when you select o!ects with the *ointing de+ice !e.ore starting a
co))and" AutoCAD )arks the selected o!ects with gri*s% >;oun,er! election )ust!e turned on in order to select o!ects .irst%
-ith gri*s you can use the *ointing de+ice to co)!ine se+eral o. the )ost co))on
editing co))ands with o!ect selection to edit )ore 5uickly% -hen gri*s are turned on"
you select the o!ects you want !e.ore editing% =ou can then )ani*ulate the o!ects%
USING THE OBJECT PROPERTIES TOOLBAR
AutoCAD *ro+ides two )ain tools that you can use to easily edit o!ect *ro*erties such
as layers" colors" linety*es" and line weights%
O*+ect Properties tool*ar3/ro+ides o*tions .or +iewing or changing the o!ect
*ro*erties that are co))on to all o!ects" including layers and layer *ro*erties"
colors" linety*es" line weights" and *lot style%
Properties )indo)3/ro+ides a co)*lete list o. *ro*erties .or any o!ect% =ou
can +iew an o!ects *ro*erties and )odi.y the ones that can !e changed%
=ou can use the controls on the 9!ect /ro*erties tool!ar to 5uickly +iew or change an
o!ects layer" layer *ro*erties" color" linety*e" line weight" and *lot style% The 9!ect/ro*erties tool!ar consolidates the co))ands needed to +iew and edit these o!ect
*ro*erties% electing an o!ect when no co))and is acti+e dyna)ically dis*lays these
*ro*erties in the controls on the tool!ar% =ou cannot change the *ro*erties o. o!ects on
locked layers%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
35/58
All controls on the 9!ect /ro*erties tool!ar su**ort character )atching instead o.
scrolling through the lists to )ake a selection" you can enter the .irst character o. the
*ro*erty na)e to select it% . the na)e is too long to !e dis*layed within the control" it isshortened with an elli*sis the control and dis*laying the tet ti*%
7ecause !locks are distinct o!ects" it is i)*ortant to understand that" although each
o!ect that co)*oses the !lock )aintains its own o!ect *ro*erties" the 9!ect /ro*ertiestool!ar re.lects only the o!ect *ro*erties .or the !lock" not its indi+idual *arts% This is
likewise true .or re.s" !ecause re.s are si)*ly eternal !locks%
The layer" color" linety*e" and line weight +alues .or a !lock are the layer" color" linety*e"
and line weight +alues that were current at the ti)e you inserted the !lock" unless you
)anually assigned other +alues to the !lock a.ter insertion% (or an indi+idual o!ect
contained within a !lock" the layer on which AutoCAD draws the o!ect is always thelayer on which the o!ect eisted at the ti)e you created the !lock% The color" linety*e"
and lineweight in which AutoCAD draws the indi+idual o!ects are descri!ed in the
.ollowing ta!le%
USING THE PROPERTIES WINDOW
-hen you enter /9/ETE" AutoCAD dis*lays the /ro*erties window% -hile the
9!ect /ro*erties tool!ar *ro+ides con+enient access to the *ro*erties that are co))on toall o!ects" the /ro*erties window is the )ain )ethod you use to )odi.y the co)*lete set
o. o!ects*eci.ic *ro*erties" including *ro*erties that you ha+e de.ined%
The /ro*erties window lists the current settings .or all o!ect *ro*erties when a single
o!ect or )ulti*le sets o. o!ects are selected% (ro) the /ro*erties window" you can
)odi.y any *ro*erty that can !e changed% To )odi.y *ro*erties using the /ro*ertieswindow select the o!ect whose *ro*erties you want to change and use one o. the
.ollowing )ethods
Enter a new +alue%elect a +alue .ro) a list%
Change the *ro*erty +alue in a dialog !o%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
36/58
Plot st$le3 Dis*lays or sets the *lot style%
"ine)eight3 Dis*lays or sets the lineweight%
1$perlin3 Dis*lays or sets the hy*erlink%
Thicness3 Dis*lays or sets the thickness%
EDITING LAYERS
-ith the layer !uttons and the layer control" you can +iew a selected o!ects layer"
change an o!ects layer" )ake a layer current" change a layers *ro*erties" and access the
'ayer /ro*erties $anager% The layer na)e and *ro*erties dis*layed in the 'ayer control
de*end on the current selection set
=ou can use the 'ayer control to trans.er o!ects to locked" .ro4en" or turned o.. layers"
!ut you cannot trans.er an o!ect to an re.de*endent layer >any layer that is de.inedwithin an inserted re.?% Gre.de*endent layers are dis*layed as una+aila!le in the list
!ecause you cannot )ake the) current and you cannot edit o!ects on those layers% =oucan" howe+er" still )odi.y the *ro*erties o. re.de*endent layers !y clicking icons in the'ayer control% n the 'ayer /ro*erties $anager" i. you turn on a .ilter and a**ly it to the
9!ect /ro*erties tool!ar" the 'ayer control does not list layers that )atch the .ilter% n
this case" when you *osition your *ointer o+er the 'ayer control" the tool ti* indicates
either P(ilter a**liedP or Pn+erted .ilter a**lied"P rather than the .ull layer na)e%
To change an o!ects layer
1 elect the o!ects whose layers you want to change%
2 9n the 9!ect /ro*erties tool!ar" choose the 'ayer control%
7ecause you cannot trans.er o!ects to re.de*endent layers" their na)es are
dis*layed as una+aila!le in the 'ayer control%3 Choose a layer%
AutoCAD a**lies the chosen layer to all selected o!ects%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
37/58
MATCHING PROPERTIES OF OTHER OBJECTS
=ou can co*y so)e or all *ro*erties o. one o!ect to one or )ore o!ects using$ATCH/9/% /ro*erties that can !e co*ied include color" layer" linety*e" linety*e
scale" lineweight" thickness" *lot style" and in so)e cases" di)ension" tet" and hatch%
COPYING THE OBJECTS
To co*y o!ects within a drawing" create a selection set and s*eci.y a start *oint and anend*oint .or the co*y% These *oints are called the !ase *oint and the second *oint o.
dis*lace)ent" res*ecti+ely" and can !e anywhere within the drawing%
Co))and Co*y
OFFSETTING THE OBJECTS
9..setting creates a new o!ect that is si)ilar to a selected o!ect !ut at a s*eci.ied
distance% =ou can o..set lines" arcs" circles" 2D *olylines" elli*ses" elli*tical arcs" lines"
rays" and *lanar s*lines% 9..setting circles creates larger or s)aller circles de*ending onthe o..set side% 9..setting outside the *eri)eter creates a larger circle% 9..setting inside
creates a s)aller one%
Co))and 9..set
MIRRORING THE OBJECTS
=ou )irror o!ects around a )irror line" which you de.ine with two *oints" as shown inthe .ollowing illustration% =ou can delete or retain the original o!ects% $irroring works
in any *lane *arallel to the G= *lane o. the current
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
38/58
ARRYING OBJECTS
=ou can co*y an o!ect or selection set in *olar or rectangular arrays >*atterns?% (or *olar
arrays" you control the nu)!er o. co*ies o. the o!ect and whether the co*ies are rotated%
(or rectangular arrays" you control the nu)!er o. rows and colu)ns and the distance!etween the)%
Co))and Array
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
39/58
MOVING THE OBJECTS
-hen you )o+e o!ects" you can rotate or align the) or )o+e the) without changing
9rientation or si4e%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
40/58
n the .ollowing ea)*le" you rotate the *lan +iew o. a house" using the de.ault relati+e
angle )ethod%
o)eti)es its easier to rotate with a!solute angles% (or ea)*le" to align two o!ects
when you know the a!solute angles o. !oth" use the current angle o. the o!ect to !erotated as the re.erence angle" and use the angle o. the other o!ect as the new angle% An
easier way is to use the *ointing de+ice to select the o!ect that you want to rotate and the
o!ect you want to align it with%
ALIGNING THE OBJECTS
=ou can )o+e" rotate" or tilt an o!ect so it aligns with another o!ect% n the .ollowingea)*le" align the *ieces o. *i*ing using a window selection !o to select the o!ect to
!e aligned%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
41/58
ERASING THE OBJECTS
=ou can erase o!ects using all the a+aila!le selection )ethods% n the .ollowingea)*le" you use window selection to erase a section o. *i*ing% 9nly o!ects enclosed !y
the window are erased%
Co))and Erase
STRETCHING THE OBJECTS
To stretch an o!ect" you s*eci.y a !ase *oint .or the stretch and then two *oints o.dis*lace)ent% =ou can also select the o!ect with a crossing selection and co)!ine gri*
editing with o!ect sna*s" gri* sna*s" grid sna*s" and relati+e coordinate entry to stretchwith greater accuracy%
Co))and tretch
Moving *$ (tretching3
n the .ollowing ea)*le" you )o+e a door .ro) one *art o. a wall to another !y
stretching% Turning on 9rtho )ode hel*s you )o+e the o!ect in a straight line%
STRETCHING BY GRIPS
=ou stretch an o!ect !y )o+ing selected gri*s to new locations% o)e gri*s )o+e the
o!ect rather than stretching it% This is true o. gri*s on tet o!ects" !locks" )id*oints o.lines" centers o. circles" centers o. elli*ses" and *oint o!ects%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
42/58
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
43/58
Co))and Etend
n this ea)*le" you etend the three hori4ontal lines to an i)*lied !oundary" which iswhere they would intersect the single line i. it were etended%
CHANGING THE LENGTHS OF OBJECTS
=ou can change the angle o. arcs" and you can change the length o. o*en lines" arcs" o*en
*olylines" elli*tical arcs" and o*en s*lines% The results are si)ilar to !oth etending and
tri))ing% =ou can alter the length in se+eral ways
Dragging an o!ects end*oint >dyna)ically?
*eci.ying a new length as a *ercentage o. the total length or angle*eci.ying an incre)ental length or angle )easured .ro) an o!ects end*oint
*eci.ying the o!ects total a!solute length or included angle
Co))and 'engthen
TRIMMING THE OBJECTS
=ou can cut an o!ect *recisely at an edge de.ined !y one or )ore o!ects% 9!ects you
de.ine as the !oundary edges or cutting edges do not ha+e to intersect the o!ect !eing
tri))edN you can tri) !ack to an i)*lied intersection% Cutting edges can !e lines" arcs"circles" *olylines" elli*ses" s*lines" lines" rays" and +iew*orts in *a*er s*ace% -ide
*olylines are cut along their centerline%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
44/58
Co))and Tri)
An i)*lied intersection is the *oint where two o!ects would intersect i. they were
etended% =ou can tri) o!ects using their i)*lied intersection as the cutting edge% n the.ollowing ea)*le" you tri) the +ertical wall !ack to its i)*lied intersection with the
hori4ontal wall%
An o!ect can !e one o. the cutting edges and one o. the o!ects !eing tri))ed% (orea)*le" in the light .iture illustrated" the circle is a cutting edge .or the construction
lines and is also !eing tri))ed%
-hen tri))ing co)*le o!ects" using di..erent selection )ethods can hel* you choose
the right cutting edges and o!ects to tri)% n the .ollowing ea)*le" the cutting edges areselected with a crossing window%
n the .ollowing ea)*le" .ence selection is used to select a series o. o!ects .ortri))ing%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
45/58
INSERTING BREAKS IN OBJECTS
=ou can re)o+e *art o. an o!ect with the 7EAK co))and% =ou can !reak lines"
circles" arcs" *olylines" elli*ses" s*lines" lines" and rays% -hen !reaking an o!ect" youcan either select the o!ect at the .irst !reak *oint and then s*eci.y a second !reak *oint"
or you can select the entire o!ect and then s*eci.y the two !reak *oints%
EXPLODING OBJECTS
E*loding o!ects con+erts single o!ects to their constituent *arts !ut has no +isi!le
e..ect% (or ea)*le" e*loding .or)s si)*le lines and arcs .ro) *olylines" rectangles"donuts" and *olygons% t re*laces a !lock re.erence or associati+e di)ension with co*ies
o. the si)*le o!ects that co)*ose the !lock or di)ension% :rou*s e*lode into their
)e)!er o!ects or into other grou*s%
7locks inserted with une5ual G" =" and J scale .actors )ay e*lode into une*ectedo!ects%
EDITING POLYLINES=ou can edit *olylines !y closing and o*ening the) and !y )o+ing" adding" or deleting
indi+idual +ertices% =ou can straighten the *olyline !etween any two +ertices and togglethe linety*e so that a dash a**ears !e.ore and a.ter each +erte% =ou can set a uni.or)
width .or the entire *olyline or control the width o. each seg)ent% =ou can also create a
linear a**roi)ation o. a s*line .ro) a *olyline%2D and 3D *olylines" rectangles" and *olygons and 3D *olygon )eshes are all *olyline
+ariants and are edited in the sa)e way%
AutoCAD recogni4es !oth .it *olylines and s*line.it *olylines% A s*line.it *olyline uses
a cur+e .it" si)ilar to a 7s*line% There are two kinds o. s*line.it *olylines" 5uadratic and
cu!ic% 7oth o. these *olylines are controlled !y the /';ET=/E syste) +aria!le% A .it*olyline uses standard cur+es .or cur+e .it and utili4es any tangent directions set on anygi+en +erte% =ou can change the s*lined *olyline !ack to a *olyline using the Decur+e
o*tion% The illustration shows a *olyline edited with the *line o*tion%
Howe+er" so)e editing actions" such as tri))ing" !reaking" and any gri* editing" re)o+e
the s*line de.inition o. a .it or s*lined *olyline% (or this reason" it is !etter to use a true
s*line" which )aintains its s*line de.inition%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
46/58
Co))and /edit
CHAMFERING OBJECTS
Cha).ering connects two non*arallel o!ects !y etending or tri))ing the) to intersect
or to oin with a !e+eled line% =ou can cha).er lines" *olylines" lines" and rays% -ith thedistance )ethod" you s*eci.y the a)ount that each line should !e tri))ed or etended%
-ith the angle )ethod" you can also s*eci.y the length o. the cha).er and the angle it
.or)s with the .irst line% =ou can retain the o!ects as they were !e.ore the cha).er ortri) or etend the) to the cha).er line%
. !oth o!ects !eing cha).ered are on the sa)e layer" the cha).er line goes on that
layer% 9therwise" the cha).er line goes on the current layer% The sa)e rules a**ly to
cha).er color" linety*e" and lineweight%. no intersection *oint is within the drawing li)its and i. li)its checking is turned on"
AutoCAD reects the cha).ering%
Cham%ering *$ (peci%$ing Distances
The cha).er distance is the a)ount each o!ect is tri))ed or etended to )eet thecha).er line or to intersect the other o!ect% . !oth cha).er distances are 0" cha).ering
tri)s or etends the two o!ects until they )eet !ut does not draw a cha).er line%
Cham%ering *$ (peci%$ing "ength and Angle
=ou can cha).er two o!ects !y s*eci.ying where on the .irst selected o!ect the cha).erline starts% Then s*eci.y the angle the cha).er line .or)s with this o!ect% n the
.ollowing ea)*le" you cha).er two lines so that the cha).er line starts 1%F units along
the .irst line and .or)s an angle o. 30degrees with this line%
Co))and Cha).er
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
47/58
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
48/58
*lotting .or that layer% The sa)e drawing li)its" coordinate syste)" and 4oo) .actor
a**ly to all layers in a drawing%
. you consistently use a s*eci.ic layering sche)e" you can set u* a te)*late drawingwith layers and their associated linety*es" lineweights" colors" and *lot styles already
assigned% 'ayers are one o. )any nongra*hical o!ects sa+ed in a drawing%
LINETYPES
A linety*e is a re*eating *attern o. dashes" dots" and !lank s*aces% A co)*le linety*e isa re*eating *attern o. sy)!ols along with dashes" dots" and !lank s*aces% The linety*e
na)e and de.inition descri!e the *articular dashdot se5uence" the relati+e lengths o.
dashes and !lank s*aces" and the characteristics o. any included tet or sha*es% =ou cancreate your own linety*es%
Ea)*les o. linety*es
To use a linety*e you )ust .irst load it into your drawing% A linety*e de.inition )ust
eist in an '; li!rary .ile !e.ore a linety*e can !e loaded into a drawing%
To load a linety*e
1 (ro) the (or)at )enu" choose 'inety*e%
2 n the 'inety*e $anager" choose 'oad%
3 n the 'oad or eload 'inety*es dialog !o" select one or )ore linety*es to load
and then choose 9K%
To select or clear all linety*es si)ultaneously" rightclick the linety*es list and choose
elect All or Clear All .ro) the shortcut )enu%The linety*es you select are dis*layed in the linety*e list in the 'inety*e $anager and in
the 'inety*e control on the 9!ect /ro*erties tool!ar%
Choose 9K%
(peci%$ing 0lo*al "inet$pe (cale
=ou can set the glo!al linety*e scale .or o!ects that you create% The s)aller the scale" the
)ore re*etitions o. the *attern are generated *er drawing unit% 7y de.ault" AutoCAD uses
a glo!al linety*e scale o. 1%0 in the current drawing units%
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
49/58
CREATING DIMENSIONS
A *recise drawing *lotted to scale o.ten does not con+ey enough in.or)ation .or !uilders
to construct your design%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
50/58
=ou can use Buick Di)ension to di)ension )ulti*le o!ects at one ti)e%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
51/58
DIMENSION STYLES
Di)ension styles control a di)ensions .or)at and a**earance% They hel* you esta!lishand en.orce dra.ting standards .or drawings and )ake changes to di)ension .or)ats and
!eha+ior easier to i)*le)ent% A di)ension style de.ines
The .or)at and *osition o. di)ension lines" etension lines" arrowheads" and center
)arks
The a**earance" *osition" and !eha+ior o. di)ension tet
The rules go+erning where AutoCAD *laces tet and di)ension lines
The o+erall di)ension scale
The .or)at and *recision o. *ri)ary" alternate" and angular di)ension units
The .or)at and *recision o. tolerance +alues
Daksh Education Cad Technology
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
52/58
PLOTTING PRINTING
A layout is a *a*er s*ace en+iron)ent that si)ulates a sheet o. *a*er and *ro+ides a
*redicta!le *lotting setu*% n a layout" you can create and *osition +iew*ort o!ects" and
you can add a title !lock or other geo)etry% =ou can create )ulti*le layouts in a drawingto dis*lay +arious +iews" each o. which can contain di..erent *lot scales and *a*er si4es%
Each layout dis*lays the drawing" as it will !e *lotted on the sheet o. *a*er%
USING MODEL SPACE PAPER SPACE
As you design your )odel drawing and *re*are it .or *lotting" you can use )odel s*ace
and *a*er s*ace ust as with *re+ious AutoCADM releases%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
53/58
(or switching !etween $odel *ace & /a*er *ace" choose the $odel ta! or enter )odel
at the co))and line to )ake the $odel ta! current% To )o+e .ro) the $odel ta! to*a*er s*ace" choose the 'ayout1 ta! or enter *a*er at the co))and line%
DETERMINING LAYOUT SETTINGS'ayout settings" which are also re.erred to as *age setu*s" control the .inal *lotted out*ut%
These settings a..ect the *lot de+ice" *a*er si4e" *lot scale" *lot area" *lot origin" and thedrawing orientation%
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
54/58
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
55/58
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
56/58
#ntering (pherical Coordinates
*herical coordinate entry in 3D is also si)ilar to *olar coordinate entry in 2D% =oulocate a *oint !y s*eci.ying its distance .ro) the origin o. the current
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
57/58
STANDARD PROJECTIONS
Each o. the si standard +iews is a 2D +iew" showing only two o. the o!ects three
*ossi!le )easure)ents width" length" or height% -hene+er )ulti*le +iews are dis*layed"
either on the screen or on *a*er" the +iews )ust !e arranged so that they share one o. thetwo *ossi!le )easure)ents% -hen they share a co))on )easure)ent" they are said to
P*roect%P
(irst angle *roection and third angle *roection are standard technical drawing )ethods
.or *resenting +iews relati+e to the .ront +iew" as shown in the .ollowing illustrations%
ISOMETRIC VIEWS
An iso)etric +iew in a +iew*ort is used *ri)arily as a +isual guide% t hel*s you
co)*rehend your 3D )odel as you create and edit chie.ly in the 2D +iews% The netillustration shows the relationshi* !etween the 2D +iews and the iso)etric +iew%
DEFINING A USER!COORDINATE SYSTEM
=ou de.ine a user coordinate syste) >
-
8/14/2019 AutoCAD PROJECT REPORT Daksh Cad Technology.doc
58/58
=ou de.ine a user coordinate syste) >