autocad 2018 deployment guide - cadline community · pdf filewhite paper reference: [june...
TRANSCRIPT
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 1 of 10
AutoCAD 2018 Deployment Guide
- Launch AutoCAD 2018 setup.exe and select Create Deployment
- Enter: o Configuration name o UNC Path for deployment creation o UNC Path for deployment log file
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 2 of 10
- Accept the License Agreement
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 3 of 10
- Enter licensing information: For stand-alone
- Enter licensing information: For network
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 4 of 10
- Expand AutoCAD 2018 product
- Make sure express tools is selected
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 5 of 10
- Turn off Security settings
- Close AutoCAD configuration settings
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 6 of 10
- Select Create to build the deployment
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 7 of 10
- Select Add Updates to add any additional updates required
- Update Software
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 8 of 10
- Select Updates required
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 9 of 10
- Close Update Manager
- Exit deployment
White Paper Reference: [June 2017]
Guide by Mark Lavers
01784 419 922 www.cadline.co.uk [email protected]
Page 10 of 10
- Folder structure after deployment
Once the deployment has completed you will have the above folder structure. You can browse on each
client machine to the UNC path and run the Revit_2018 shortcut. This will install Revit in silent mode on to
the machine.
There is also an SMS_SCCM scripts folder which will guide you on how to deploy using SCCM.