auto equipment catalogue
DESCRIPTION
autoTRANSCRIPT
No. Name Model Technical parameters Picture
ZDT-2.8S
Lifting capacity:2700Kg Max.Lifting height:1200mmMin.Lifting height:110mm Platform width:1003mm-1400mm
ZDT-3.0SL
Pump:Italian hydraulic pump Power:AC400V or 230V±5% 50Hz Platform length:1450mmLifting capacity:3.0T Lifting height:1830mm Feature:Super thin structure,no need to dig a pit.
ZDT-3.3S
Lifting capacity: 3.3T;
Max.lifting height: 2000mm;
Min.Lifting height 195mm;Lifting platform: 1587mm/62”(L), 1969mm/77”(W);Method of operation :control box or remote control;Motor: 2.2kw;
Rising time: 50s;Lowering time: 30s;Power supply: 380V/220V 50hz;G.W.: 1100kg;N.W.: 1060kg
ZDT-130Lifting capacity:3000KGLifting height:1850mm Motor:2.2KW Power supply: 380/220V
Scissor lift1
一、Service equipment
2 Four post lift ZDT-8-4B
Lifting capacity:8TLifting height:1700mmRising time<110sLowering time<110sMin.height:215mmWorking span:3270mmPump pressure:16MPaMotor:2.2Kw,
Power:380v,Overall weight:2600kg
ZDT-20-4A
Lifting capacity:20T(25T、30T optional);
Way of transmission:mechanicalPit size(W.×D.):it dependsMax.stroke:≥500mm;height of stroke depends on the deepth of pitRising&lowering speed:6mm/s;Power:380V;
Motor:2×2.2kw;2×3kw;2×3 kwOverall weight:1.6t;1.9t;2tAdditional parts included:8 pcs of heightened support,2 pcs of 3m rails.
ZDT-30-4c
Lifting capacity: 30tLifting height: 1500mmOutput speed of rotation: 50r/minRising speed: 600mm/mmMotor power: 4×3kwPower supply: 380vOverall weight: 6tOverall dimmensions: 1300×1160×3000mm
Bus lift3
ZDT-Q30-4C
Lifting capacity per post:7.5TTotal lifting capacity per set:30T(4 post)、45T(6 post)Max.lifting height:1700mmHeight(lifting arms lie on the
ground):2300~2400mmPower supply:380v/50Hz(3 phase)、220v/60Hz(3
phase)
Rising time for full stroke:120sWeight per post:550kgDiameter range of wheels that can be lifted:870~1156mm
4 Assembly crane ZDT-92200
Lifting power:2TonLifting arm range:1050-1590mmLifting range:0-2360mm75Kgs/78Kgs/carton
5 Gearbox lift ZDT-02053
Loading capacity:0.5TonMin.heightt:1290mmMax.height:1780mm33Kgs/35Kgs/wooden case
6 Jack ZDT-88250
Loading capacity:3Ton Min.height:135mm Lifting height:365mmMax.height:500mm28Kgs/30Kgs/wooden case
Crane T32002X 2T
Press machine TY20002 20T7
Horizontal jack T83001X 3T
(GERMANY)KARCHERHDSS551C
Power supply: 1/230V/50HZFlow capacity: 550 L/hWorking pressure: 140bar/14MpaMax.water temperature: 80℃Power: 3.2KwFuel consumption: 4.0Kg/hFuel tank: 16 LWeight: 80KgSize(L.X W.X H.) 940*600*740 mm
ZDT-11115
Rated voltage: 380/50HzPower: 3KwRated speed of rotation: 1430RPMRated pressure: 11MPa 1600psi Theoretical flow capacity:15 L/Min 4 GPMGross weight: 60 kgPackage size: 740*530*600 mm
2 Spray gun cleaner ZDT-25500 Professional pneumatic pump,big inside groove:500*400*450mm,16 nozzles
3 Mobile grease kit ZDT-37100
Suitable for 180-220kg drums;with 36094 pump and joint for the drum hole,38041 air circuit two-fittings,with 80201 trolley,10m hose reel,1
pc of spray gun with electric digital display,working pressure 4-5bar
Cold&hot water washer
1
二、Cleaning and maintenance equipments
ZDT-96140
Suitable for filling the same oil in several filling stations (including):37685 filling kit 1set;
82010 oil hose reel 4sets;
37713filling gun with digital display 4pcs;
88630 wall-mounted gun box 4sets;
50505 monitation valve for liquid level optional;Special liquid pipe with 40m pipe pieces
ZDT-99120
Suitable for filling the same oil in several filling stations (including):53101 control unit 2sets;
37685 filling kit 1set;
82010 oil hose reel 2sets;
automatic control filling gun system 2sets;
88630 wall-mounted gun box 2sets;
50505 monitation valve for liquid level optional;
50102 computer connection mould optional;
50101 control printer optional;
Special liquid pipe with 20m pipe pieces and 25m special signal line。
5 Pneumatic parts washer
ZDT-25085
Groove capacity:135L;With strainer mesh and cleaning brush;Working pressure1.2kg;Big inside groove,size:900*500*300mm;
Heating system optional
Centralized oil distribution
system
4
6Stainless steel foam cleaning
machine
ZDT-23381
304 stainless steel tankcapacity:60L,working pressure:2.5-3bar,safety valve:3.5bar,net grain pipe:7m
7 Brake oil changer ZDT-24150
Tank capacity:5L,air pressure:4bar,rated pressure:1bar,safety valve:1.5bar,with special trolley and 1 set of various joints
8Automatic
transmission oil changer
ZDT-26190Working pressure:60-100PSI,Special pneumatic pump with 1 set of special joint
9 Pneumatic oil collecting machine
ZDT-3181
Tank capacity:70L,Tray:10L,Oil collecting height: 1.65m,gas consumption:200L/min,oil draining pressure:1bar,lngth of oil draing pipe:1.5m;
10Pneumatic oil pumping and
collecting machine
ZDT-3194
tank capacity: 70L,Tray: 10L,Oil collecting height: 1.65m,Oil pumping speed:0.6-1.6L/min,working pressure
7-8bar,air consumption 200L/min,Vacuum degree 0-0.8bar,length of oil pumping pipe 1.5m,Oil draining pressure:1bar,length of oil draining pipe 1.5m;
11 Electric portable grease kit
ZDT-37920
Suitable for 180-220kg drum;with special gear pump,220V,0.75KW,1400r/min,rated
pressure:2bar,flow capacity:10-18L/min,with 80201 trolley 1 set,filling gun with
electric digital display 1 pc
ZDT-10AC/8 Flow capacity:1.4m3/min, Discharge pressure:1.2Mpa,7.5KW
ZDT-15AC/8 Flow capacity:1.65m3/min,Discharge pressure:1.2Mpa,11KW
ZDT-BLX-15A
Air discharge capacity: 1.64m3/minAir discharge pressure:8 barMotor power:11kwMain engine:Sweden-made Atlas SAP patented screw
Cooling method: air cooling
Size:772×650×861mmWeight:198KG
2 Air tank C-1/8
Specifications:thread,flange
Tank capacity:1 M3Working pressure:<10MPaStorage medium :compressed air
Material:carbon steel,stainless steel,low alloy steel
ZDT-SOY-7.5HP
(USA)D108INR-A
Max.pressure:1.4MPa,Inlet temperature:≤65,Noize:41dB,Flow capacity:1.8m3/min
used with compressor
Air compressor
Dryer3
三、Pneumatic and engineering equipments
A1T-55
Power:220V 50/60HZMax.power consumption:1100W+-15%Suction power:250WVacuum capacity:2.6m3/minVacuum pressure:2000mmH2O+-15%Current:4.5ANoize:70dBPaper filtration:0.3uCloth filtration:6uTank volume:48LSuction hose length:5mPower cable/dia.:7m/1.0mm2N.W.:36KgsSize:77.8cm L. x 55cm W. x 94.6cm H.
ZDT-86010 hose length:10m,pressure:1.4MPa
ZDT-86210 cord length:10m,3wLED light,220V。
Aluminium alloy centrifugal fan with low noise,power:1-3P, 380V, 50HZFlow capacity:1700m3/h,low noise,low energy
consumption,large air volume.
Aluminium alloy centrifugal fan with low noise,power:1-3P, 380V, 50HZ
Flow capacity:1700m3/h,low noise,low energy consumption,large air volume.
Sliding type ZDT-QDH
Reel type ZDT-QDJ
Sander&vacuum cleaner
Exhaust extraction system
Cord reel
四、Universal tools&equipments
4
2
3
ZDT-500
Max.no.of cylinders to be tested:6 pcs
Oil tank capacity:4LTest tube capacity:120mlUltrasonic frequency:25KHZUltrasonic power:100WWeight:42KG
ZDT-600
Max.no.of cylinders to be tested:6 pcsOil tank capacity:4LTest tube capacity:120mlUltrasonic frequency:25KHZUltrasonic power:100WWeight:45KG
2 Engine roll-over stand
ZDT-0.5T Suitable for repairs of < 800kgs engine
1 Decoder ZDT-CS538D
(ITALY)ISC-778
Refrigerant nozzle type: R134 a;Coolant pot volume:12.4L;Recovery speed:500g/min;Filling quantity range:0-8 kg;Filling precision:5g;Pumping speed of vacuum pump:3m3/h;Rated voltage/frequency:220V/50HZ;Weight:88kg;
Oil spray nozzle cleaner
五、Service tools for engine
六、General tools and air conditioner service equipments
1
ZDT-320
Working pressure:220V/50HzTank capacity:12.5KgCompressor:3/8匹Working temperature:11℃-47℃Recovery speed:240g/MProcessing ability of drying pot:68KgDiplay precision of scale:0.001KgPumping speed of vacuum pump:60L/MCoolant type:R134a或R12Package size:116×68×68cmTransportation weight:about 90Kg(G.W.)
ZDT-230
Coolant type: R134aPower: current 220V/50HzElectronic scale precision: 10克Vacuum creating speed : 5.4m3/hLiquid reservior volume: 15KgRecovery speed: 300g/minFilling speed:800g/min
ZDT-65D2
Applicable coolant:R12/R22/R134a /R407c Recovery speed(gaseous state):10kg/h Filling speed:1Kg/Min Compressor:(HP)1/3Vacuum pump :1.5L/SEnvironment temperature: -10℃-50℃
Coolant pot :22.7KgSteel bottle with gas and liquid valve
Power: 220V 50HZ N.W.(Kg) :90 Machine size(mm):640*720*1164
Coolant recycling&filling
machine
2
七、Tyre/braking equipment
ZDT-B70D
Motor power 0.2kw/0.32kwVoltage 240V/220V/110V 50/60Hz 1PhRim width 40--510mm/1.5~20”Rim diameter 254--615mm/10~24”Max.wheel weight 65kg
ZDT-B70ZD
Motor power 0.2kw/0.32kwVoltage 240V/220V/110V 50/60Hz 1PhRim width 40--510mm/1.5~20”Rim diameter 254--615mm/10~24”Max.wheel weight 65kg
ZDT-B75
Motor power 0.2~0.35kwVoltage 240V/220V/110V 50/60Hz 1PhaseBalancing speed of rotation 200rpmBalancing precision ±1gRim width 40~510mm/1.5~20”Rim diameter 254~615mm/10~24”Max.wheel diameter 940mm/37”Max.wheel weight 65kgNoise <70dBWeight 140kg
ZDT-B820
17'LED displayRim diameter 12"-24",Rim width 1.5/12,Mx.wheel diameter 800mm
ZDT-C22D
Motor power 1.1KW/0.75KW/0.55KWVoltage 110V/220VMax.wheel diameter 44”/1120ramMax.wheel width 14”/360mmRim clamping diameter(outer) 10”-21”Rim clamping diameter(inner) 12”-24”
Wheel balancer1
ZDT-C22HT
Motor power 1.1KW/0.75KW/0.55KWVoltage 11OV/220V/240V/380V/415VMax.wheel diameter 44”/1120mmMax.wheel width 14”/360mmRim clamping diameter(outer) 10”-21”Rim clamping diameter(inner) 12”-24”
ZDT-C20D
Motor power 1.1KW/0.75KW /0.55KWVoltage 110V/220V/240V/380V/415VMax.wheel diameter 38”/960mmMax.wheel width 11”/280mmRim clamping diameter(outer) 10”-18”Rim clamping diameter(inner) 12”-21”
ZDT-C24HT
Motor power 1.1KW/0.75KW/0.55KWVoltage 11OV/220V/240V/380V/415VMax.wheel diameter 44”/1120mmMax.wheel width 14”/360mmRim clamping diameter(outer) 10”-21”Rim clamping diameter(inner) 12”-24”
ZDT-N2P
Machine size: 1255X720X435Package size: 1380X730X510N.W.: 89KGG.W. :106KGPower :100-240VAc50/60HZPower consumption :30VAWorking temperature: -20°/-4°F to 70°C/158°FAir inlet pressure: 87-123PSI/6-8.5Bar/600-850KpaNitrogen purity: 95-99+%Max.pressure of Nitrogen: 102PSI/7bar/700KPaNitrogen output:58L/min under the adsorbtion pressure of 8BarInside gas tank:50L
Tyre changer2
ZDT-E-1130
Machine size: 1215X700X435Package size: 1280X730X510N.W. :60KGG.W.: 70KGPower: 100-240VAc50/60HZPower consumption: 20VAWorking temperature -20°/-4°F到70°C/158°FAir inlet pressure 87-123PSI/6-8.5Bar/600-850KpaNitrogen purity 90-99+%Max.pressure of Nitrogen: 102PSI/7bar/700KPaNitrogen output:50L/min under the adsorbtion pressure of 8Bar
Inside gas tank:50L
ZDT-320
Nitrogen purity:95%-99%Compressor pressure:8-10kgNitrogen output pressure:0-8kgNitrogen production speed:55-70L/minTank capacity:20升N.W.:60kg
ZDT-OPS-N
Package size:500X290X170N.W.: 4KGG.W.: 6.5KGPower: 100-220VAc50/60HZPower consumption: 10VAWorking temperature: -20°/-4°F to 70°C/158°FMax.inlet pressure: 145PSI/10bar/1000KPaTyre inflating range: 5-102PSI/0.3-7bar/35-700KPaPrecision: 1PSI/0.07bar/7KPaMin.display unit: 1PSI/0.1bar/5KPaPressure unit: PSI/bar/KPa
Tyre inflator
Nitrogen inflator
5
3
ZDT-E-07- N
Machine size:290X230X120 Package size:500X290X170 N.W.:4KG G.W.:6.5KG Power:100-220VAc50/60HZ Power consumption:10VA Working temperature:-20°/-4°F to 70°C/158°F Max.inlet pressure:145PSI/10bar/1000KPa Tyre inflating range:5-102PSI/0.3-7bar/35-700KPa Precision:1PSI/0.07bar/7KPa Min.display unit::1PSI/0.1bar/5KPa Pressure unit:PSI/bar/Kpa
3 Paint mixing machine
ZDT-M68
Rated voltage 220V,1PHRated frequency 50HzRated current 10ARated power 0.75WOverall dimensions:2.3*0.520*1.97 (m)
5 layers
ZDT-A-3T
Rated voltage 220V,1PHRated frequency 50HzRated current 10ARated power 3300WBaking distance 700MMInput wire length 5M
Tyre inflator
Infrared baking lights
5
4
八、Sheet metal&paint tools
九、Testing equipment
ZDT-D5T(manual)
Distance light intensity, test range: 0~80000cd indication error: ±12%Distance light optical axis offset,Vertical: test range: upward offset 321mm/dam~downward offset 408mm/dam, indication error ±44 mm/damHorizontal: test range: left offset 408mm/dam ~right offset 408mm/dam , indication error ±44 mm/dam
ZDT-ICS(automatic)
luminous intensity:0~100000cd(distance light)
Vertical:up2°~down3°or up35cm/10m~down
50cm/10mHorizontal:left3°~right3°or left 50cm/10m~right 50cm/10mIndication range of the center height of headlamp:50cm~130cm
ZDT-5G
CO:measuring range 0~10.0 10-2(%) CO2:measuring range0~20.0 10-2(%) HC:measuring range0~10000 10-6(ppm)O2:measuring range0~25.0 10-2(%) NO:measuring range0~5000 10-6(ppm) Oil temperature:18℃~150℃
Speed of rotation:100~20000rpm
Headlamp tester1
ZDT-4G
HC measuring range 0~2000×10-6(ppm)Error±3%(relative error)
2001~10000×10-6(ppm)error±5%(relative
error)
CO measuring range 0~10% ±3%(relative error)
10.01%~15% ±5%(relative error)
CO2 measuring range 0~20% ±5%(relative
error)
O2 measuring range 0~25% ±5%(relative error)
ZDT-T1(somke
meter)
Light absorption ratio(N): 0~99.9%;
Light absorption coefficient(K): 0~16.0m¯1。Smoke temperature:0~200℃Oil temperature:0~100℃Speed of rotation:250~9999r/min
Exhaust gas analyzer
2